Health And Family Welfare Department Tender

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more

Centering shuttering including struttings, propping etc.and removal of form work for: Lintels, beams, plinth beams, girders, bressumers and cantilevers with wooden plank

Half brick masonry work with first class bricks in superstructure upto floor five level including cost of all materials as required complete:- In cement mortar 1:4 ( 1 cement : 4 fine sand ).

6 mm cement plaster of mix : Cement mortar 1:4 (1 cement : 4 fine sand)

15 mm cement plaster on the rough side of single or half brick wall of mix: Cement mortar 1:4 (1 cement : 4 fine sand)

Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers

Providing and fixing 1st class quality ceramic glazed wall tiles conforming to IS : 15622 - 2017 (thickness to be specified by the manufacturer) of approved make in all colours, shades of any size as approved by Engineer-incharge in skirting, risers of steps and dados, laid over 12 mm thick bed of cement mortar 1 : 3 (1 cement : 3 fine sand) jointed with ordinary cement slurry including pointing with white cement mixed with pigment of matching shade etc.450 mm X 300 mm in all shades and design

Grading roof for water proofing treatment complete as required as per direction of the Engineer-in-charge with :Cement mortar 1:4 (1cement : 4 fine sand)

Providing, mixing and applying bonding coat of approved adhesive on chipped portion of RCC as per specifications and as per direction of Engineer-In-charge complete in all respect. SBR Polymer (@10% of cement weight) modified cementitious bond coat @ 2.2 kg cement per sqm of surface area mixed with specified proportion of approved polymer

Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer, 3 mm thick water proofing membrane, black finished reinforced with glass fibre matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufactured of density at 25°C, 0.87 -0.89 kg/litre and viscocity 70 - 160 cps. Over the primer coat the layer of membrane shall be laid using butane torch and sealing all joints etc., and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 350/300 N/5 cm. Tear strength in longitudinal and transverse direction as 60/80N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147 as per direction of the Engineer-in-Charge. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane as required as per direction of the Engineer-in-charge. 3 mm thick

Demolishing brick work including stacking of serviceable materials and disposal of unserviceable materials with all lifts and upto a lead of 50m etc. complete as per direction of the Engineer- in-charge:- In cement mortar

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25 x 10 x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall /partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : 12.5 mm thick tapered edge gypsum board conforming to IS: 2095- Part I

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixing with dash fasteners of required dia and size, including necessary filling up of gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / paneling, C.P. brass/ Stainless steel screws all complete as per architectural drawing and the direction of Engineer - in-charge. (Glazing and paneling and dash fasteners to be paid for separately) :-.

A. For fixed portion of approved quality:- Powder coated aluminium ( minimum thickness of powder coating of 50 micron ).

B. For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing fittings wherever required including the cost of EPDM rubber / neoprene gasket required ( Fittings shall be paid for separately ):- Powder coated aluminium ( minimum thickness of powder coating of 50 micron ).

Providing and fixing 12 mm thick prelaminated three layer medium density (exterior grade ) particle board grade-I, type II conforming to IS : 12823 bonded with phenol formaldehyde synthetic resin, of approved brand and manufacture in panelling fixed in aluminium doors,windows , shutters and partition frames with C.P. brass / stainless steel screws all complete as per architectural drawing and the direction of Engineer-in-charge :- Prelaminated particle board of approved quality with decorative lamination on one side and balancing lamination on other side.

Providing and fixing glazing of approved quality in aluminum doors, windows, ventilator, shutters and partition etc. with EPDM rubber / neoprene gasket etc. complete as per architectural drawing and the direction of Engineer-in-charge (Cost of snap beading shall be paid in basic item) :- With float glass panes of 4.0 mm thickness ( weight not less than 10.0 kg / sqm )

Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veeners on both faces of shutters. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.

Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt / suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S including cost of adhesive of approved quality. 1.5 mm thick

Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles with necessary screws etc. complete (best make of approved quality).

Providing and fixing IS : 3564 marked aluminium extruded section body tubular type universal hydraulic door closer with double speed adjustment with necessary accessories and screws etc. complete.

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. all complete. Fixed to steel windows by welding.

Wiring for light / fan / exhaust fan / call bell point with 2 x1.5 sq. mm pvc insulated Copper conductor cable (FR) in pvc casing and capping complete with 6/10 amps modular type switch, cover plate, surface modular switch board including connection etc as required:-

Short Point :-

Medium Point :-

Long Point :-

Wiring for Circuit/Sub-main with the following sizes PVC insulated Copper conductor cable (FR) in PVC conduit (medium gauge) recessed in slab/ wall etc. as required:-

(i) 2 X 1.5 + 1 X 1.5 sq mm

(ii) 2 X 2.5 + 1 X 1.5 sq mm

(iii) 2 X 4 + 1 X 1.5 sq mm

Providing and fixing of 3 pin 6/10 amps plug point with modular type 6/10 amps switch and socket including connection with 2x1.5 sq. mm PVC insulated Copper conductor cable (FR) on surface modular switch board, earthing the 3rd pin etc. as required:-

Providing and fixing of 3/6 pin 16/20 amps plug point with modular type 16/20 amps switch and socket including connection with 2x2.5 sq. mm PVC insulated Copper conductor cable(FR) on surface modular switch board, earthing the 3rd pin etc. as required:-

Supplying of 400 mm sweep AC wall mounting fan with metal blade etc as required:-

Supplying and fixing of following surface/recess mounted LED luminaries in powder coated die cast housing complete with high efficiency polycarbonate diffuser and necessary connection etc. as required (with 50000 burning hours and minimum lumen output of 100 lm/watt):

(a) Recessed round/Square shaped 18 watt LED downlight with integral driver and high quality polycarbonate diffuser:-

(b) Recessed round/Square shaped 6 watt LED downlight with integral driver and high quality polycarbonate diffuser:-

Supplying and installation of Switch disconnector fuse unit (main switch) of the following ratings with all accessories including necessary connection etc. as required:-63 amps 415 volts TPN main switch (rewireable):-

Supplying and installation of powder coated steel sheet enclosure (MCB DB) suitable for 240/415 volts MCB/Isolator/RCCB (SP/SPN/DP/TP/TPN/FP) complete with necessary bus bar, neutral link, din rail, earth bar etc i/c connection as required.(2+4) / 6 way SPN MCB DB (single door):-

Supplying & installation of 10 KA breaking capacity, B/C curve MCB of following ratings in the existing MCB DB including connection as required:-6 to 32 amps SP MCB:-

Supplying and fixing of the following modular accessories including necessary connection etc. as required.20/25 amps single phase motor starter switch (2M):-

Providing, fitting fixing & installation of Wall Cabinet/Overhead Cabinet assembled with marine grade (BWP) termite proof 19 mm block board structure, 12 mm waterproof ply finished with 1 mm thick laminate of approved shade . The minimum depth of the cabinet will be 400 mm & the height will be upto 1500 mm. The cabinet will be multi chambered and all members will be of 19 mm block board except backing . The backing will be of 12 mm thick solid board to be fixed on the will with 75 mm stainless steel screws of approved quality. The materials should be of approved brand & manufacture like Green Ply, Kit Ply, Century Ply, Austin Ply or durobord ply etc & to be customise at work site in/c necessary framing with all hardware fittings & accessories etc complete as per direction of the Engineer-in charge.

Providing, fitting fixing & installation of L-shaped front table cum computer desk assembled with marine grade (BWP) termite proof 19 mm block board structure, 6mm waterproof ply finished with 1 mm thick laminate of approved shade . The size of L-shaped table will be of 5'-0"x2'-0"x2'-6" & 2'-6" x 2'-0"x2'-6" repectively. The table will consists of storage unit with 3 layer sliding drawer, UPS & CPU stand, keyboard tray, wire manager etc. The materials should be of approved brand & manufacture like Green Ply, Kit Play, Century Ply, durobord ply etc & to be customise at work site in/c necessary framing with all hardware fittings & accessories etc complete as per direction of the Engineer-in charge.

Providing and fixing in position wall panelling at all heights with 6 mm thick BWP ply board lapping with 4 mm thick Teak Veneer of approved quality in outer face, decorative teak wood bead (50 x 40 ) at top and skirting (150 x 25), comprising of a frame made from especially fabricated galvanised mild steel sheet 0.50 mm thick pressed section ( galvanizing @120 grams per sqm including both sides) i.e.vertical studs of size 48 x 34 x 36 mm are placed at 600mm center to center in a floor and ceiling channel section of size 50 x 32m fixed to the floor and soffit at 600mm centers using 12mm dia,50mm long wedge type expanded zinc alloy dash fastner with 10mm bolt. This same channel is then to be fixed in horiziontal direction at 600mm center to center so as to form a grid of 600mm x 600mm. Glasswool of 50mm thickness is then to be inserted in the slots and finally ply board are to be screw fixed with self tapping pan head nickel coated mild steel screws of size 13 x 3.2mm all complete as per manufacturer' s specification as per direction of Engineer-in-Charge all complete.

Supplying and fitting fixing of Multi seated sofatype chair with foam based seat and back cover with arm, fixed on beam of any colour of approved quality (Decowell make, Model No-DC-149)

Supplying and installation of wireless PA Meeting Amplifier including necessary connection etc as required (Similar to AHUJA make Cat no-WA-620/622/621)(Price list w.e.f 1st Feb, 2016)

Supplying and installation of Mic Stand including necessary connection etc as required (Similar to AHUJA make Cat no-DGN)(Price list w.e.f 1st Feb, 2016)

Supplying and installation of PA Microphone including necessary connection etc as required (Similar to AHUJA make Cat no-AXM-3500U)(Price list w.e.f 1st Feb, 2016)

Supplying & installation of Central Amplifier including necessary connection etc as required (similar to AHUJA Cat No:-CMA-4400)(Price list w.e.f 1st Feb, 2016)

Supplying & installation of Chairman Unit including necessary connection etc as required (similar to AHUJA Cat No:-CMC-4100)(Price list w.e.f 1st Feb, 2016)

Supplying and installation of AC & 24 V DC Operation 250 Watts, 6 Mic & 2 Aux Inputs PA Amplifier including necessary connections with all accessories as required:-(Similar to AHUJA make cat no SSA-250DP)(Price List w.e.f 1st Feb, 2016)

Supplying and installation of 10 W PA wall speaker including necessary connections with all accessories as required:- (Similar to AHUJA Make cat no-PS-300T)(Price list w.e.f 1st Feb, 2016)

Supplying and installation of AC & 24 V DC Operation 120 Watts, 5 Mic & 2 Aux Inputs PA Amplifier including necessary connections with all accessories as required:-(Similar to AHUJA make cat no SSB-120DP)(Price List w.e.f 1st Feb, 2016)

Providing of split type high wall 1.50 TR (4500 Kcal/Hours) split AC machine with inverter compressor technology operating on non-CFC refrigent(R-410A/R-32/equivalent refrigerants) suitable for wall mounting conforming to IS:1391(Part-II) specification (Evaporator and condenser must have copper pipes) suitable for operation on 230 V+/- 10% , not less than 5 (five) star rating (2019 standard), 50Hz, single phase AC supply capable of permorming a) Cooling b) Dehumidifying c) Air Circulation d) Filtering as per direction of the Engineer-in- charge.

Standard installation of 1.5 TR/ 2.00 TR capacity High wall Split type Air Conditioner in the Ground & 2nd Floor in/c repairing of drilled wall by cement mortar, painting in/c necessary insulation of copper pipes and also providing electrical 3 pin 16 amp top for connection in socket & necessary scafolding etc. complete as per direction of the Engineer-in- charge.

Fabrication of M.S. Platform for placement of condensing unit by using M.S. angle of (50x50x5)mm size base plate, nuts & bolts or cradle of suitable sizes in/c fitting, fixing grouting by cement mixer, painting, as per direction of the Engineer in charge.

Providing hard PVC pipe of good quality of 25 mm diameter including necessary clamping and fitting for draining of condensate water from indoor unit as per direction of the Engineer-in-Charge

Supply and installation of additional length of copper pipe of 5/8 inch and 1/4 inch or suitable diameter for suction and liquid line in a set and wiring of Copper pipes and electric cable between indoor and outdoor unit (for 1.5 TR & 2.00 TR ac) beyond the standard length as per direction of the Engineer-in-Charge.

Painting with aluminium paint of approved brand and manufacture to give an even shade [Payment shall be made after submission of Test Certificate issued by the Manufacturer]. Two or more coats on new work

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Distempering with dry distemper of approved brand and manufacture (two or more coats) of required shade on new work , over and including water thinnable priming coat to give an even shade. [Payment shall be made after submission of Test Certificate issued by the Manufacturer] .

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade [Payment shall be made after submission of Test Certificate issued by the Manufacturer]: Two or more coats on new work