Airports Authority Of India Tender

Wall Mounted Facility Announcer (Sign Type -2.2a) as per TS Refer design drawing 2.2a-S Providing and fixing illuminated signs including all operations from fabrication to installation all complete as per drawings, technical specifications, signage schedule and to thesatisfaction of the Engineer-in-Charge. Sign face Sign face shall be made in 5mm thick 040 white acrylic (as specified) having graphics pasted in Plotter cut Blockout vinyl. Entire panel covered with a protective overlaminate. The films to wrap around the edge of the acrylic to a distance of 25mm on the back side. The Plotter cut blockout vinyl shall match the specified colour (colour Pantone Black 6C) and vinyl for text Pantone yellow Cor Cyan 311C as per graphics and of specified make duly approved by the Engineer-in-Charge. Sign Frame Providing and fixing sign frame 50mm wide powder coated, colour RAL 9006 special aluminium extrusion with inbuilt frame to recieve the sign face. The sign face shall be fixed to sign frame with the 3M brand dual lock system in one side and 3M bothway tape from the other side.The panel should be made easily openable for maintainance. Lighting All internal illumination shall be using Power LED strip edge Lights with electronic controllers, having even spread and overlaps to avoid banding and dark spots. The actual structural design of the sign for its stability shall be responsibility of the EPC contactor. Secret fixing methods should be used to fix parts together. Accessories: Providing and fixing all accessories such as thimbles, end connectors, nut-inserts, screws , rivets, bolts, washers, nuts, etc. complete as per drawing.

Floor Mounted Facility Announcer (Sign Type -2.2f) as per TS Refer design drawing 2.2f-S, 2.2f-G Providing and fixing illuminated signs including all operations from fabrication to installation all complete as per drawings, technical specifications, signage schedule and to thesatisfaction of the Engineer-in-Charge. Sign face Sign face shall be made in 5mm thick 040 white acrylic (as specified) having graphics pasted in Plotter cut Blockout vinyl. Entire panel covered with a protective overlaminate. The films to wrap around the edge of the acrylic to a distance of 25mm on the back side. The Plotter cut blockout vinyl shall match the specified colour (colour Pantone Black 6C) and vinyl for text Pantone yellow Cor Cyan 311C as per graphics and of specified make duly approved by the Engineer-in-Charge. Sign Frame Providing and fixing sign frame 50mm wide powder coated, colour RAL 9006 special aluminium extrusion with inbuilt frame to recieve the sign face. The sign face shall be fixed to sign frame with the 3M brand dual lock system in one side and 3M bothway tape from the other side.The panel should be made easily openable for maintainance. Lighting All internal illumination shall be using Power LED strip edge Lights with electronic controllers, having even spread and overlaps to avoid banding and dark spots. The actual structural design of the sign for its stability shall be responsibility of the EPC contactor. Secret fixing methods should be used to fix parts together. Accessories: Providing and fixing all accessories such as thimbles, end connectors, nut-inserts, screws , rivets, bolts, washers, nuts, etc. complete as per drawing.

Washroom/ Drinking Water/ Baby Care Providing and fixing of illuminated sign with basic dimension 450x450x50 mm, with sign frame 50mm x 2.5mm (Wall thickness) wide powder coated, colour RAL 9006 Aluminium extrusion with inbuilt frame to receive the sign face. The sign face shall be fixed to sign frame with VHB tape in one side and Hook & Loop tape from the other side so as the panel be easily openable for maintenance. For Type 2, sign rear surface of sign is 2mm thick powder coated Pantone Black 6C Aluminium sheet. Sign face is 5mm thick double side UV coated white 040 cell cast arylic with vinyl pasted over it as per grpahics. The sign shall have minimum lumen output of 3487 lm for Type 1 & 1155 lm for Type 2, using LED module suitable for 240 V/50 Hz operation, with electronic controllers etc . a) Type 1- Wall projected : 450x450x50 mm (ST-2.4a) as per TS

b) Type 2- Wall mounted : 450x450x50 mm (ST-2.4a) as per TS

Service Area Sign Providing and fixing of sign with basic dimension 250x300x3 mm, with sign facia 3mm thk. Black cell cast acrylic digitally printed graphics, mounted on walls/claddings/ panelling using VHB Tape. (ST-2.4b) as per TS

Statutory Signs Sign Type -2.5 as per TS Providing and fixing Non-illuminated signs including all operations from fabrication to installation all complete as per drawings, technical specifications, signage schedule and to the satisfaction of the Engineer-in-Charge.» Sign Face Digitally printed Graphics on vinyl pasted on 3mm thick black acrylic mounted on walls/calddings/ panelllings using VHB Tape. Poster Size A4 Sign Type -2.5e Refer design drawing 2.5G-02

Emergency Direction Signs Emergency Direction Signs - Illuminated Sign Type- 2.6a as per TS, Refer design drawing 2.6a-G Providing and fixing illuminated emergency signs including all operations from fabrication to installation all complete as per drawings, technical specifications, signage schedule and to the satisfaction of the Engineer-in-Charge.» Sign face Sign face shall be made in 6mm thick Laminated acrylic (as specified) with graphics in white and green tranluscent vinyl on the inside face of the glass and of specified make duly approved by the Engineer-in-Charge. Sign Farme- 1.5mm CRAC MS powder coated White. Illumination- All internal illumination shall be using Power LED strip edge Lights with electronic controllers, having even spread and overlaps to avoid banding and dark spots. Sign Fixing- Suspenders and projecting pipes shall be sainless steel to match other similar hardware 35mm dia. The actual structureal design of the sign for its stability shall be responsibility of the contractor and shall be designed with due consultation and approval from structural designer. Accessories: Providing and fixing all accessories such as thimbles, end connectors, nut-inserts, screws, rivets, bolts, washers, nuts, etc. complete as per drawing. 9.1) 2.6a-1 Exit

9.2) 2.6a-2 Emergency Exit

Assembly point (Sign Type -2.6c-2) as per TS Refer design drawing 2.6c-S, 2.6c-G Providing and fixing Non-illuminated emergency signs including all operations from fabrication to installation all complete as per drawings, technical specifications, signage schedule and to the satisfaction of the Engineer-in-Charge.» Sign face -Providing and fixing Photoluminiscent signs made of screen printing using artworks provided and with photoluminiscent material as per technical specifications.Screen printing shall be done on self adhesive vinyl and pasted on 2mm thick powdercoated white (RAL 9016) aluminium plate and fixed at location using screws. as per specification and using provided art work including all operations from procuring the correct materials and made to sizes as specified and approved by the Engineer-in-charge. including all installation activities like marking, alignment and fixing with screws into the wall/cladding/face to the satisfaction of the Engineer-in-Charge.» Sign Frame-Internal MS structure receiving the signs faces using equal angles, hot-dipped galvanised and welded to the sign post. Sign Post 100 mm OD MS post PU painted to match RAL 9011 grouted in ground with concrete footing as per detail.The actual structural design of the sign for its stability shall be responsibility of the EPC contactor. Foundation-Providing and laying foundation for the sign including its compaction and all activities like Excavation, PCC base layer, providing and fixing in position electrical connection wherever applicable and finished as per drawing. The item cost includes cutting and opening the floor finish at location, and making good the location to the match the original finish after fixing and installation of sign » Accessories: Providing and fixing all accessories such as thimbles, end connectors, nut-inserts, screws , rivets, bolts, washers, nuts, etc. complete as per drawing.

Fire Extinguisher 1) Providing, fixing and commissioning of single sided non Illuminated signs as per design submitted. Sign made in photoluminescent sheet. Rigid Photo luminescent based Glow-in-the-dark rigid sheet with high intensity luminous properties enclosed in a transparent weather-proof UV stabilized coated sheet with UV screen printing by imported links, Thickness : 1 mm, Service Temp. : -10 to + 60°C, Application : Suitable for INDOOR use only, Surface Colour : Greenish Yellow, Visibility : Glow visible up to 24 hours in total darkness, Properties : *Fungistatic *Non-radioactive *Contains no lead or Phosphorus * No health or environmental problem *Simple to install & easy to maintain, can be screwed or just peel off to stick *Self-Extinguishing. Size (600X500)mm