The Singareni Collieries Company Limited Tender

Repairs to CC roads between CHP main gate and B zone cross road at SRP CHP;Providing longitudinal sawn joints by grooving with mechanical saw to a width of 3 to 5mm and depth of 1/3rd of thickness of concrete and operation should be carried out as soon as concrete is ready to accept the saw cut without trowelling including providing tie bars of Required dia, length and spacing as per design. Tie bars shall be coated with bitumen paint for 75mm on either side. The joints shall be filled with polymer based fillers and sealants including cost and conveyance of all materials to work site, Labour charges, etc., complete for finished item of work and as directed by the Engineer-in-charge (excluding the cost of Tie bars and their fabrication required which will be paid separately). Note: All relevant MORT and H / IRC codes to be followed.

Repairs to CC roads between CHP main gate and B zone cross road at SRP CHP;Conveyance charges of CEMENT including loading, unloading and stacking charges for 5 KM lead.

Repairs to CC roads between CHP main gate and B zone cross road at SRP CHP;Labour charges for cutting, bending and binding reinforcement with contractors binding wire, and placing in position as directed by Engineer - in - charge including all leads, etc., complete

Repairs to CC roads between CHP main gate and B zone cross road at SRP CHP;Conveyance charges of CEMENT including loading, unloading and stacking charges for Beyond 5KM and upto 30KM(Rate/KM) lead.

Repairs to CC roads between CHP main gate and B zone cross road at SRP CHP;Providing contraction sawn joints at every 4.50 m distance or as directed by Engineer In charge by grooving with mechanical saw, the width of 3 to 5mm and depths 1/3rd to 1/4th of thickness of concrete and operation should be carried out as soon as concrete is ready to accept the saw cut without trowelling including providing dowel bars of Required dia, length and spacing as per design and covered with thin plastic sheathing of 2/3 length. The joint shall be filled with polymer based fillers and sealants as shown in the drawing and including cost and conveyance of all materials to work site, Labour charges, etc., complete for finished item of work and as directed by the Engineer-in-charge (excluding the cost of dowel bars and their fabrication required which will be paid separately). Note: All relevant MORT and H / IRC codes to be followed.

Repairs to CC roads between CHP main gate and B zone cross road at SRP CHP;Demolishing Plain Cement Concrete through Manual means and disposal of unserviceable materials within 100 metres lead - more than 15 cm thickness.

Repairs to CC roads between CHP main gate and B zone cross road at SRP CHP;Conveyance charges of Steel including loading, unloading and stacking charges for Beyond 5KM and upto 30KM(Rate/KM) lead.

Repairs to CC roads between CHP main gate and B zone cross road at SRP CHP;Supply of Mild steel Round bars for the month of May - 2022 (As per C.Memo.No.146/ Cement and Steel/ T2/ 2021-22, Dt:- 10-6-2022)

Repairs to CC roads between CHP main gate and B zone cross road at SRP CHP;Cement Concrete 1:4:8 with 40mm down size (Crushed Granite metal of approved hard quality including machine mixing and vibrating with mechanical vibrator finishing to the required camber for CC Pavement sub grade including necessary side shuttering etc., Complete for finished Item of work as directed ( Excluding Cost of Cement).(CA : 0.90 Cum, FA:0.45Cum)

Repairs to CC roads between CHP main gate and B zone cross road at SRP CHP;Excavation for Road work in soil with Hydraulic Excavator 0.9cum bucket capacity including cutting and loading in tippers / pushing the earth to side of embankment (by trench cutting) including trimming bottom and side slopes, in accordance with requirements of lines and grades and cross sections as per technical specification 301 of MORT and H

Repairs to CC roads between CHP main gate and B zone cross road at SRP CHP;Conveyance charges of Steel including loading, unloading and stacking charges for 5 KM lead.