The Singareni Collieries Company Limited Tender
For getting the details of etenders, if you are looking for information about them from the cumbersome government websites but are tired of doing so, Bidassist comes up with a one stop solution. It collates every Eproc telangana tender on Bidassist. One can approach it for the bidding process, registration process, etc., are explained below.
The Singareni Collieries Company Limited - SCCL Tender
Civil And Construction
Building Construction
Opening Date28 Dec 2023
Closing Date12 Jan 2024
Tender Amount₹ 14,06,980
Costs
EMD
Refer DocumentsDocument Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
487285Bid Award Id
ViewTender No
BPA/CVL/N.1/EP-137/2023-24Tender Authority
The Singareni Collieries Company Limited ViewPurchaser Address
-Website
http://https://scclmines.com/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
Maintenance and Repair works to Higher Type quarters i.e., NC Type and C2 Type quarters at Goleti To;Supply of Flyash Cement / lime solid blocks with compressive strength of 50 kg/cm2 (IS : 12894 - Class -5) - 225 x 100 x 60 mm
200
6
1296
Maintenance and Repair works to Higher Type quarters i.e., NC Type and C2 Type quarters at Goleti To;Supply of Hard broken stone of granite, free from dust obtained by quarrying, wedging, breaking, burning, splitting, and blasting - 40mm size crushed metal (SS-5)
2
2061
4122.4
Maintenance and Repair works to Higher Type quarters i.e., NC Type and C2 Type quarters at Goleti To;Supply of Hard broken stone of granite, free from dust obtained by quarrying, wedging, breaking, burning, splitting, and blasting - 20mm size crushed metal (SS-5)
2
2549
5098.8
Maintenance and Repair works to Higher Type quarters i.e., NC Type and C2 Type quarters at Goleti To;Supply of Sand for Concrete/ Masonry works and Filter Beds.
2
1874
3748.36
Maintenance and Repair works to Higher Type quarters i.e., NC Type and C2 Type quarters at Goleti To;Dismantling doors, windows, ventilators etc. (wood or steel) shutters including frames through Manual means complete and stacking them within 100 metre lead.
10
238
2389
Maintenance and Repair works to Higher Type quarters i.e., NC Type and C2 Type quarters at Goleti To;Dismantling / Removing old Cement mortar plaster through Manual means
100
9
950
Maintenance and Repair works to Higher Type quarters i.e., NC Type and C2 Type quarters at Goleti To;Demolishing Plain Cement Concrete through Manual means and disposal of unserviceable materials within 100 metres lead - upto 15 cm thickness.
2
1630
3260.2
Maintenance and Repair works to Higher Type quarters i.e., NC Type and C2 Type quarters at Goleti To;Demolition of Brick / Stone masonry in Cement Mortar through Manual means including stacking of serviceable materials and disposal of unserviceable materials within 100mts lead.
2
541
1083.8
Maintenance and Repair works to Higher Type quarters i.e., NC Type and C2 Type quarters at Goleti To;S and F of 15 mm brass body CP finish long body bib tap of not less than 400 grams weight with quarter turn spindle internal / external threaded connection conforming to IS 8931
2
908
1817.4
Maintenance and Repair works to Higher Type quarters i.e., NC Type and C2 Type quarters at Goleti To;Supply and fixing 15 mm nominal size CP finish brass stop Cock screw type with internal /external threaded conforming to IS 8931 -400 grams
5
329
1646
Maintenance and Repair works to Higher Type quarters i.e., NC Type and C2 Type quarters at Goleti To;Supply and fixing of 15 mm brass body CP finish bib Cock of not less than 400 grams weight screw type (full turn) with internal / external threaded connection conforming to IS 8931
5
335
1677.5
Maintenance and Repair works to Higher Type quarters i.e., NC Type and C2 Type quarters at Goleti To;Supply and fixing 30 mm nominal size dia PVC flexible waste pipe of 914.4 mm length of Ist quality
10
33
330
Maintenance and Repair works to Higher Type quarters i.e., NC Type and C2 Type quarters at Goleti To;Supplying and fixing TV shape mirror with plastic frame size 609.6x457.2mm
5
610
3054.5
Maintenance and Repair works to Higher Type quarters i.e., NC Type and C2 Type quarters at Goleti To;Supplying and fixing stainless steel sink size 20 Inches x18 Inches x8 Inches (508x457.2x 203.2 mm) 1mm thick with accessories
5
5424
27121
Maintenance and Repair works to Higher Type quarters i.e., NC Type and C2 Type quarters at Goleti To;Supplying and Fixing Indian make Flat Back Coloured Wash Hand Basin 1st quality conforming to IS:2556-Part-4:1972 with 32mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400grams Seiko/Senior/ Nice/Esso or equivalent complete with standard CI brackets including wooden block: 550x400mm - Single C.P. Pillar cock
2
3101
6202.8
Maintenance and Repair works to Higher Type quarters i.e., NC Type and C2 Type quarters at Goleti To;Supplying and Fixing Indian make Flat Back Wash Hand Basin 1st quality conforming to IS: 2556 - Part-4:1972 with waste fittings like 32mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400grams Seiko/Senior/ Nice/ Esso or equivalent complete with standard CI brackets including wooden block: 550x400mm - Single C.P. Pillar Cock
5
2533
12669
Maintenance and Repair works to Higher Type quarters i.e., NC Type and C2 Type quarters at Goleti To;Supply and fixing of PVC low level Cistern with internal components and short bend 10 Ltrs capacity Single flush
5
1887
9438
Maintenance and Repair works to Higher Type quarters i.e., NC Type and C2 Type quarters at Goleti To;Supply and fixing best Indian make plastic seat and lid for European water closets with rubber or plastic Buffers as per IS 2548-1996
5
1369
6846.5
Maintenance and Repair works to Higher Type quarters i.e., NC Type and C2 Type quarters at Goleti To;Supplying and fixing wash down European water closet of first quality conforming to IS 2556-Part-2-2004 of white glazed with S trap. Plastic seat and lid is to be paid extra.
5
2266
11333
Maintenance and Repair works to Higher Type quarters i.e., NC Type and C2 Type quarters at Goleti To;Supplying and fixing 580 x 440mm Orissa pan white glazed W.C first quality ISI marked conforming to IS 2556 - part 3- 2004 with P or S trap
5
2399
11999
Maintenance and Repair works to Higher Type quarters i.e., NC Type and C2 Type quarters at Goleti To;Extra depth of 450mm x 450mm Inspection Chamber beyond 450mm depth (Excluding cost of cement) Extra for every 0.100m (100mm) depth
5
507
2535.6
Maintenance and Repair works to Higher Type quarters i.e., NC Type and C2 Type quarters at Goleti To;Construction of 450mm x 450mm and 450mm depth Inspection Chamber with CC 1:4:8 base of 150mm thick 40 mm Crushed Granite metal and 225 mm thick Brick masonary walls in CM 1:6 with fly ash bricks of size 225 x 100 x 60mm with 50kg/Sq. Cm Compressive strength and plastering with CM 1:4; 12mm thick including rendering the surfaces smooth both inside and outside and channelling to required slope including supply and fixing precast RCC 1:2:4 cover of 50mm thick and 600 X 600mm size with 20mm down size (65% of 20-10mm and 35% of 10-4.75mm) graded Crushed Granite metal, including earthwork excavation to the required depth etc; complete for finished item of work (but excluding cost of cement steel and its fabrication charges.)
5
3467
17335.85
Maintenance and Repair works to Higher Type quarters i.e., NC Type and C2 Type quarters at Goleti To;Extra depth of Circular Man Hole of Size 900mm dia( Excluding Rock cutting) beyond 450mm depth (Excluding cost of cement) Extra for every 0.100m(100mm) depth
5
740
3703.6
Maintenance and Repair works to Higher Type quarters i.e., NC Type and C2 Type quarters at Goleti To;Construction of 900mm dia and 450mm depth circular manhole with CC 1:4:8 base of 150mm thick with 40 mm Crushed Granite metal, 225mm thick Brick masonry walls in C.M 1:6 with Flyash bricks of size 225X100x60mm and having compressive strength of 50 kg/sqcm, plastering with CM 1:4,12mm thick including rendering the surfaces smooth both inside and outside and benching with 100mm thick CC 1:2:4 with 20mm down size (65% of 20-10mm and 35% of 10-4.75mm) graded Crushed Granite metal and channelling to required slope including supply and fixing precast RCC 1:2:4 cover of 50mm thick and 600mm dia using 20mm down size (65% of 20-10mm and 35% of 10-4.75mm) graded Crushed Granite metal, including earth work excavation to the required depth etc. complete for finished item of work (but excluding cost of cement, steel and its fabrication charges.)
5
5158
25794
Maintenance and Repair works to Higher Type quarters i.e., NC Type and C2 Type quarters at Goleti To;Rate for conveyance of RCC socket and spigot pipes on all weather roading including loading Unloading and stacking (per metre of effective length) (for NP2 pipes). (Rate for every additional 1 Km. lead or part there of beyond 5KM initial lead is only payable) - For 150 mm Dia pipes
1000
-
340
Maintenance and Repair works to Higher Type quarters i.e., NC Type and C2 Type quarters at Goleti To;Supplying, laying, jointing RCC NP2 hume pipes (socket and spigot) confirming to IS 458/2003, with necessary rubber rings (as per IS 5382/1985) cost and conveyance of all materials to site, labour charges, all operational charges etc complete as directed for finished item of Work For 150mm dia Pipes. NOTE:- Transportation of pipes includes up to 5 KM from Factory. For any extra lead, necessary extra lead charges may be added.
20
454
9098
Maintenance and Repair works to Higher Type quarters i.e., NC Type and C2 Type quarters at Goleti To;Supplying and fixing of CPVC unions - For 20mm (3/4 inch) union
10
96
965
Maintenance and Repair works to Higher Type quarters i.e., NC Type and C2 Type quarters at Goleti To;Supplying and fixing of CPVC unions - For 25mm (1 inch) union
10
120
1203
Maintenance and Repair works to Higher Type quarters i.e., NC Type and C2 Type quarters at Goleti To;Supply and Fixing of CPVC Pipes along with Fittings to meet the requirement of ASTM-D 2846 etc., complete - For 28.60mm OD Pipe - SDR 11
10
273
2734
Maintenance and Repair works to Higher Type quarters i.e., NC Type and C2 Type quarters at Goleti To;Supply and Fixing of CPVC Pipes along with Fittings to meet the requirement of ASTM-D 2846 etc., complete - For 22.20mm OD Pipe - SDR 11
10
230
2302
Maintenance and Repair works to Higher Type quarters i.e., NC Type and C2 Type quarters at Goleti To;Supply of Prince/Sudhakar/ Kisan/ Supreme or any ISI Brand UPVC/ SWR Pipe (as per ISI- standards) fittings like bends, tees, Ys, etc., For Plain Bend 87.5 degrees.- 75mm dia
10
62
625
Maintenance and Repair works to Higher Type quarters i.e., NC Type and C2 Type quarters at Goleti To;Supply of Prince/Sudhakar/ Kisan/ Supreme or any ISI Brand UPVC/ SWR Pipe (as per ISI- standards) fittings like bends, tees, Ys, etc., For Plain Bend 87.5 degrees.- 110mm dia
10
104
1045
Maintenance and Repair works to Higher Type quarters i.e., NC Type and C2 Type quarters at Goleti To;Supplying, laying, fixing and commissioning the SWR pipes of Prince/Sudhakar/ Kisan/ Supreme or any ISI Brand SWR Pipe (as per ISI- standards) Type - B Pipes (PVC/SWR pipe - 6 Kg/sq.cm) for soil and sullage water of any diameter including fixing necessary fittings like bends, plugs, couplers, junctions, tees, etc with solvent jointing as per standard practice excluding cost of fittings. - For 110mm dia 3M Single socket pipe
10
1383
13836
Maintenance and Repair works to Higher Type quarters i.e., NC Type and C2 Type quarters at Goleti To;Supplying, laying, fixing and commissioning the SWR pipes of Prince/Sudhakar/ Kisan/ Supreme or any ISI Brand SWR Pipe (as per ISI- standards) Type - B Pipes (PVC/SWR pipe - 6 Kg/sq.cm) for soil and sullage water of any diameter including fixing necessary fittings like bends, plugs, couplers, junctions, tees, etc with solvent jointing as per standard practice excluding cost of fittings. - For 75mm dia 3M Single socket pipe
10
895
8951
Maintenance and Repair works to Higher Type quarters i.e., NC Type and C2 Type quarters at Goleti To;Erection of compound wall gates, MS fencing posts on ground or on top of compound wall, cattle trap , MS holding down bolts, templates, in position etc., complete
250
8
2000
Maintenance and Repair works to Higher Type quarters i.e., NC Type and C2 Type quarters at Goleti To;Fabrication of steel works like compound wall gates, MS fencing posts on ground or on top of compound wall, cattle trap , MS holding down bolts, templates, in position etc., complete including cost of welding rods, power charges etc., complete.
250
18
4550
Maintenance and Repair works to Higher Type quarters i.e., NC Type and C2 Type quarters at Goleti To;Erecting companys steel purlins, louvers, sag rods, rafters etc., with contractors tackle, derric, crane etc., complete
0.5
9089
4544.6
Maintenance and Repair works to Higher Type quarters i.e., NC Type and C2 Type quarters at Goleti To;Fabrication of structural steel components like purlins, louvers, sag rods, rafters etc., including all leads and lifts at site etc., with companys steel sections but with contractors welding rods, bolts, rivets and all contingencies, power charges, etc., complete as per drawings and instructions of the Engineer in charge.
0.5
14770
7385
Maintenance and Repair works to Higher Type quarters i.e., NC Type and C2 Type quarters at Goleti To;Providing Superior quality wall care putty 2 coats for internal / external walls complete for finished Item of work.
100
119
11960
Maintenance and Repair works to Higher Type quarters i.e., NC Type and C2 Type quarters at Goleti To;Acrylic exterior emulsion Painting to Old walls 2 coats with Grade-II i.e., Ace or equivalent paint of Approved Make complete for finished Item of work For External Walls
1000
104
104000
Maintenance and Repair works to Higher Type quarters i.e., NC Type and C2 Type quarters at Goleti To;Plastic emulsion Painting to Old Internal walls with paint of Approved Make, two coats complete for finished Item of work. - For Internal Walls
200
75
15140
Maintenance and Repair works to Higher Type quarters i.e., NC Type and C2 Type quarters at Goleti To;Plastic emulsion Painting to New Internal walls with paint of Approved Make with 2 coats over a base coat of Grade -1 primer (making 3 coats in all) complete for finished Item of work - For Internal Walls
100
142
14280
Maintenance and Repair works to Higher Type quarters i.e., NC Type and C2 Type quarters at Goleti To;Oil bound Distempering to Old walls with 2 coats of Approved Make distemper complete for finished Item of work.
300
67
20220
Maintenance and Repair works to Higher Type quarters i.e., NC Type and C2 Type quarters at Goleti To;Colour washing to OLD WALLS with Surya Cem / Equivalent Cem adding required colour two coats complete for finished Item of work.
300
28
8400
Maintenance and Repair works to Higher Type quarters i.e., NC Type and C2 Type quarters at Goleti To;Whiting to OLD ceiling with Surya cem / Equivalent Cem, two coats to give an even shade complete for finished item of work.
50
28
1445
Maintenance and Repair works to Higher Type quarters i.e., NC Type and C2 Type quarters at Goleti To;White washing to Old walls with Surya Cem / Equivalent Cem, two coats complete for finished item of work.
300
26
7860
Maintenance and Repair works to Higher Type quarters i.e., NC Type and C2 Type quarters at Goleti To;White washing to New walls with Surya Cem / Equivalent Cem two coats complete for finished item of work.
100
39
3930
Maintenance and Repair works to Higher Type quarters i.e., NC Type and C2 Type quarters at Goleti To;Varnishing/French Polishing to wood work - 2 coats - complete for finished item of work
30
184
5532
Maintenance and Repair works to Higher Type quarters i.e., NC Type and C2 Type quarters at Goleti To;Painting with two coats of Synthetic enamel paints of grade - II paints of Approved Make and Shade to Old Iron work - complete for finished item of work.
30
103
3090
Maintenance and Repair works to Higher Type quarters i.e., NC Type and C2 Type quarters at Goleti To;Painting to Iron work with two coats of synthetic enamel paint of grade II of Approved Make and shade including a base Coat of Red oxide primer paint of grade -I of Approved Make making 3 coats - To new work -all complete for finished item of work.
30
170
5124
Maintenance and Repair works to Higher Type quarters i.e., NC Type and C2 Type quarters at Goleti To;Painting / priming coat with Red oxide iron primer paint of grade-1 of Approved Make to Old Iron work - complete for finished item of work.
30
60
1809
Maintenance and Repair works to Higher Type quarters i.e., NC Type and C2 Type quarters at Goleti To;Painting to wood work/ Plastered Surfaces with Two coats of synthetic enamel paints of grade II of Approved Make, shade- to old works - complete for finished item of work.
100
115
11510
Maintenance and Repair works to Higher Type quarters i.e., NC Type and C2 Type quarters at Goleti To;Supply and fixing Aluminium anodised fittings including necessary bolts and nuts etc. complete for finished item of work as directed - For Heavy duty Door stopper
10
84
844
Maintenance and Repair works to Higher Type quarters i.e., NC Type and C2 Type quarters at Goleti To;Supply and fixing Aluminium anodised fittings including necessary bolts and nuts etc. complete for finished item of work as directed - For Tower bolts ( As per IS â??204) 150 mm long with 10mm dia shoot
10
104
1045
Maintenance and Repair works to Higher Type quarters i.e., NC Type and C2 Type quarters at Goleti To;Supply and fixing Aluminium anodised fittings including necessary bolts and nuts etc. complete for finished item of work as directed - For Tower bolts ( As per IS â??204) 200 to 250mm long with 10mm dia shoot
10
129
1295
Maintenance and Repair works to Higher Type quarters i.e., NC Type and C2 Type quarters at Goleti To;Supply and fixing Aluminium anodised fittings including necessary bolts and nuts etc. complete for finished item of work as directed - For butt hinges(As per IS:205)100mm Long
15
92
1386
Maintenance and Repair works to Higher Type quarters i.e., NC Type and C2 Type quarters at Goleti To;Supply and fixing Aluminium anodised fittings including necessary bolts and nuts etc. complete for finished item of work as directed - For Grip handles(As per IS:208)125mm Long
15
103
1555.5
Maintenance and Repair works to Higher Type quarters i.e., NC Type and C2 Type quarters at Goleti To;Supply and fixing Aluminium anodised fittings including necessary bolts and nuts etc. complete for finished item of work as directed - For Aldrop (As per IS:2681)300mm long with 16mm dia shoot
15
276
4140
Maintenance and Repair works to Higher Type quarters i.e., NC Type and C2 Type quarters at Goleti To;Supply and fixing Aluminium anodised fittings including necessary bolts and nuts etc. complete for finished item of work as directed - For Aldrops ( As per IS â??2681) 200 mm long with 16mm dia shoot
15
223
3357
Maintenance and Repair works to Higher Type quarters i.e., NC Type and C2 Type quarters at Goleti To;Supply and fixing of Cement Bonded Pre-laminated Particle Board aluminium glazed partitions using 10MM Cement Bonded Pre-laminated Particle Board and 5.00 mm thick plain glass to full height. Using with Cement Bonded Pre-laminated Particle Board to a height of 0.91 M at bottom panel and remaining height with glass and aluminum sections anodized to 12 to 15 microns and of sections of size 37mm x 62mm and 1.5mm thickness with one meter centre to centre duly fixed with clip beading on both sides including fixing the frame to pillars by M.S. flats, bolts and nuts including cost and conveyance of all materials etc., complete as directed during execution of approved make
5
4240
21200.5
Maintenance and Repair works to Higher Type quarters i.e., NC Type and C2 Type quarters at Goleti To;Supply, Fabrication and fixing of door frame made of Angle iron of size 40x40x 6mm with one coat of Red oxide grade-I primer with the following MS fittings (Excluding Cost of Bed Blocks)(The Steel Sections etc., required will have to be procured by the contractor only and Steel will not be issued by the department) 1). 6nos. M.S. Z type hold fasts made out of 15x3mm flat of 100mm long fixed in CC 1:2:4 bed blocks (150 x 100x 100mm) 2) 10mm dia tie rod at the bottom with necessary nuts at the ends of Each side 3). 1no.stopper hinge per leaf 75mm medium duty 4). 4 No.s 300mm long T-Hinges
20
466
9326
Maintenance and Repair works to Higher Type quarters i.e., NC Type and C2 Type quarters at Goleti To;Supply and fixing of door shutters made of rigid PVC extruded hollow section of 20x200mm with the wall thickness of 1.00mm +/- 0.1mm equally divided into 4nos with tongue and groove locking arrangements. The shutter frame is made of 30 x79mm with the wall thickness of 1.5mm +/- 0.15mm section mitre-cut and joined at 4 corners with 125x225mm plastic brackets. The shutter shall be horizontally reinforced with 2 nos of 8mm PVC rods. Teak wood batons shall be reinforced inside the door shutter during the fabrication of the door shutter at those points wherever the hardware is fixed on to the door shutter and including the Following MS Powder coated fittings - PVC DOOR SHUTTER : Single Shutter as per Approved Make a) 1no.of 200mm long aldrop with 16mm dia shoot. b) 2 nos. 200 mm long tower bolt with 10mm dia shoot. c) 2 no. 100 mm to 150 mm long grip handle. d) 3 nos.100 mm long butt hinges.
10
2424
24242
Maintenance and Repair works to Higher Type quarters i.e., NC Type and C2 Type quarters at Goleti To;Supply and fixing of door frame made of hollow extruded PVC section having dimensions of 40 X 57mm with the wall thickness of 2mm +/- 0.2mm duly reinforced with seasoned wood plank at the hinges side. The door frame top 2 corners shall be metri-cut/ welded. PVC DOOR FRAME as per Approved Make
10
290
2909
Maintenance and Repair works to Higher Type quarters i.e., NC Type and C2 Type quarters at Goleti To;Supply and fixing 12mm thick window shutters with plain Cement bonded particle board (bison panel or equivalent) conforming to IS 14276 with alround U section of size 12x18mm x 12mm made from 0.60mm thick galvanised colour coated cold rolled steel profiles with necessary srews fixed at every 1foot (304.8mm) intervals, fixing to the existing angle iron frame along with the following MS Powder coated fittings of approved make and applying 1coat of primer, one coat of luppam and 2 coats of Synthetic enamel paints as per approved design including cost and conveyance of all materials to site, all labour charges etc., complete for finished Item of work as directed. a) 150mm tower bolts with 10mm dia shoot - 1No.s per leaf b) 125mm long grip handles - 1No. per leaf c) 250mm long window casements- 1No. per leaf d) 200mm to 225mm long T- hinges 2nos per leaf
10
1425
14258
Maintenance and Repair works to Higher Type quarters i.e., NC Type and C2 Type quarters at Goleti To;Supply and fixing of Cement Bonded Particle Board (IS 14862) door shutters using with 16MM thick with all round style â??Uâ?? lipping size of 20mm x18mm x20mm made from 0.6mm thick galvanized pre-painted cold rolled steel profiles with Cement Bonded Particle Board separating two shutter with 30mm x20mm x30mm Stepped lipping including cost and conveyance of all materials at site and applying one coat of primer, 2 coats of luppam and 2 coats of synthetic enamel paint as per approved design for finished item of work - BISON PANEL(IS 14276) DOUBLE DOOR SHUTTER with necessary screws fixed at every 1foot (304.8mm) intervals and including the following MS powder coated fittings. etc., complete finished item of work as per Approved Make a). 250 mm long aldrops 2nos. b). 250mm long tower bolt with 10mm dia shoot- 2nos c). 2nos 125 mm long grip handle d) 2 Nos. Door Stopper
10
2308
23081
Maintenance and Repair works to Higher Type quarters i.e., NC Type and C2 Type quarters at Goleti To;Supply and fixing of Cement Bonded Pre-laminated Particle Board single door shutter using 16MM Cement Bonded Pre-laminated Particle Board with all round section â??Uâ?? section size of 20mm x18mm x20mm made of 0.60mm thick galvanized pre-painted cold rolled steel profiles Cement Bonded Pre-laminated Particle Board with necessary screws fixed at every 1â??0â?? ( 304.8mm) intervals. The cost inclusive of MS Nickel / powder coated fittings and Including cost and conveyance of all materials at site labour charges etc., complete finished item of work - SINGLE SHUTTER as per Approved Make a). MS Nickel coated coated 250mm long aldrops 2 nos , b). MS powder coated 250mm long tower bolt with 10mm dia shoot- 1 nos, c). 2nos MS powder coated 125mm long grip handle, d). 1 noâ??s M.S. Powder coated Door stopper.
10
2700
27006
Maintenance and Repair works to Higher Type quarters i.e., NC Type and C2 Type quarters at Goleti To;Supply and fixing Door frame of 100 x75mm with Non teak wood including supply and fixing with 6nos. M.S.Z type hold fasts made out of 50x3mm M.S.flat 300mm long in CC beds, etc., complete. (Excluding Cost of Bed Blocks.)
10
738
7389
Maintenance and Repair works to Higher Type quarters i.e., NC Type and C2 Type quarters at Goleti To;Supply and fixing Door frame of 100 x75mm with Medium teak wood including supply and fixing with 6nos. M.S.Z type hold fasts made out of 50x3mm M.S.flat 300mm long in CC beds, etc., complete. (Excluding Cost of Bed Blocks.)
10
1050
10509
Maintenance and Repair works to Higher Type quarters i.e., NC Type and C2 Type quarters at Goleti To;Supply and fixing Door frame of 125 x62mm with Medium teak wood including supply and fixing with 6nos. M.S.Z type hold fasts made out of 50x3mm M.S. flat 300mm long in CC beds, etc., complete. (Excluding Cost of Bed Blocks.)
10
1080
10807
Maintenance and Repair works to Higher Type quarters i.e., NC Type and C2 Type quarters at Goleti To;Providing Dadooing to walls with ceramic wall tiles of size 300x450mm / 320mm x 400 mm and thickness 6 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs, set over base coat of CM (1:3) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost and conveyance of all materials, labour charges etc., complete for finished item of work,( But Excluding Cost of Cement )
10
824
8249.9
Maintenance and Repair works to Higher Type quarters i.e., NC Type and C2 Type quarters at Goleti To;Providing Dadooing to walls with ceramic wall tiles of size 200x300mm / 245mm x 325 mm and thickness 6 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs, set over base coat of CM (1:3) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost and conveyance of all materials, labour charges etc., complete for finished item of work,( But Excluding Cost of Cement )
10
699
6997.9
Maintenance and Repair works to Higher Type quarters i.e., NC Type and C2 Type quarters at Goleti To;Providing skirting /risers of steps with ceramic wall tiles of size 200 x 300mm / 245mm x 325mm with 6 mm thick 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs and length equal to flooring tiles, set over base coat of CM (1:3) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost and conveyance of all materials, labour charges etc., complete for finished item of work,( But Excluding Cost of Cement )
5
530
2652.95
Maintenance and Repair works to Higher Type quarters i.e., NC Type and C2 Type quarters at Goleti To;Flooring with Non-skid Ceramic floor tiles of size 400 x 400 mm and thickness between 7-8 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs, set over base coat of cement mortar (1:6), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per Sqm and jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost and conveyance of all materials, labour charges etc., complete for finished item of work, (But Excluding Cost of Cement )
10
867
8679.9
Maintenance and Repair works to Higher Type quarters i.e., NC Type and C2 Type quarters at Goleti To;Providing plinth protection work with 50mm thick CC 1:3:6 using 20mm Down size (65% of 20-10mm and 35% of 10 - 4.75mm) graded Crushed granite metal together with a bed of 75mm thick CC 1:5:10 using 40mm Crushed granite metal well rammed, consolidated including finishing the top smooth duly maintaining the required slopes to drain off water as per site conditions including cost and conveyance of all materials to site of work, all labour, operational, and incidental charges and necessary side support for concrete while laying etc., complete for finished item of work (to a total thickness of 125mm). ( But Excluding Cost of Cement ) using Machine mixing
30
686
20593.5
Maintenance and Repair works to Higher Type quarters i.e., NC Type and C2 Type quarters at Goleti To;Flooring 40mm thick with CC1:2:4 using 20mm Down size ( 65% of 20-10mm and 35% of 10 - 4.75mm ) graded crushed granite metal of approved hard quality on existing concrete base, rendering smooth complete. ( But Excluding Cost of Cement )
50
312
15643.5
Maintenance and Repair works to Higher Type quarters i.e., NC Type and C2 Type quarters at Goleti To;Supply and fixing minimum of 25mm to 30mm thick polished Black Kadapa single slab of required size as directed by the Engineer-in-charge with exposed faces square cut and well polished, on existing Walls, with grey Cement Slurry of honey like consistency spread at the rate of 3.30Kg./Sqm. including cost and conveyance all materials and water to work site and all operational, incidental, labour charges, dressing and fixing of stones in position rubbing curing etc., complete for Shelves as directed (But Excluding Cost of Cement)
20
370
7412
Maintenance and Repair works to Higher Type quarters i.e., NC Type and C2 Type quarters at Goleti To;Providing and laying in situ water proofing treatment with 2mm thick APP (Atactic Polypropylene Polymeric) modified glass fibre sheet membrane over roof consisting of first course of bitumen primer at the rate of 0.40Kg/sqm, 2nd course of bonding material at the rate of 1.20 Kg/Sqm and 4th course of bonding material at the rate of 0.6Kg/sqm, which shall consist of blown type bitumen of grade 85/25 conforming to IS : 702, 3rd course of roofing membrane with 2 mm APP modified glass fibre sheet membrane of Asian or Equivalent make and applying one coat of bituminous aluminium paint as top (5th) course (at the rate of 8 to 10 Sqm / 1 Lr) for heat resistance for finished item.
50
401
20050
Maintenance and Repair works to Higher Type quarters i.e., NC Type and C2 Type quarters at Goleti To;Brushing of existing concrete surface with wire brush and providing cement concrete 1:2:4 screed of an average thickness of 20mm using 6mm size crushed granite metal of approved hard quality, and providing 2 layers of 30 guage rabbit wire mesh in the CC screed as nominal reinforcement and plastering with CM 1:4, 12mm thick including admixing of approved impervious water proofing compound as per manufacturers specification or @ 2% by weight of cement and finishing smooth and including providing slopes to drain off water etc., complete as directed (But Excluding Cost of Cement )
30
319
9575.1
Maintenance and Repair works to Higher Type quarters i.e., NC Type and C2 Type quarters at Goleti To;Providing impervious coat 20mm average thickness in 2 coats for CRS walls etc., with CM1:3, mixed with Approved Make of water proofing compound at the rate of 1Kg per bag of cement in 2nd coat and rendering smooth, rounding off junctions of walls as directed including cost and conveyance of all materials and water etc., and operational, incidental, Labour charges etc., ( But Excluding Cost of Cement ) complete for finished item of work.
30
231
6932.4
Maintenance and Repair works to Higher Type quarters i.e., NC Type and C2 Type quarters at Goleti To;Plastering with CM 1:4, 20mm thick over flat roofs, before applying tarfelting (But Excluding Cost of Cement )
50
221
11084
Maintenance and Repair works to Higher Type quarters i.e., NC Type and C2 Type quarters at Goleti To;Labour charges for removing the damaged Tarfelt sheet from roofs and disposing the same as directed:-
100
33
3340
Maintenance and Repair works to Higher Type quarters i.e., NC Type and C2 Type quarters at Goleti To;Providing and fixing Thermocole False ceiling 600mmx 600mm using 19mm thick Thermocole sheet, anodised Aluminium Tee sections of size 24.50mm x 24.0mm x 2.4mm in grid with cross tee of size 24mm x 24.5mm x 2.4mm at every 600mm c/c and anodised aluminium wall angle of size 24mm x 24mm x 2.4mm fixed to periphery of the wall and the above grid is suspended at every 1200mm c/c in both directions using 2.0mm thick GI Wire including cost and conveyance of all materials to site etc., for finished item of work as directed. Holding down clips to be used for fixing Thermocole sheets.
100
639
63980
Maintenance and Repair works to Higher Type quarters i.e., NC Type and C2 Type quarters at Goleti To;Labour Charges for G.I Sheets for Roofing/Side sheeting including Cost of Necessary number of 8mm dia J Bolts, Bitumen and G.I washers, Nuts etc., With Or Without Ridges, valley gutters including fixing of wind ties as per the requirement etc., complete for finished item of work (cost of wind ties and its fabrication charges are not included)
20
275
5506
Maintenance and Repair works to Higher Type quarters i.e., NC Type and C2 Type quarters at Goleti To;Roofing/side sheeting with Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.50mm thickness, Coating: Alu-Zinc coating AZ150 GSM. Tensile Strength: 550 MPA. Paint coating: Regular Modified Polyester painting. Painting Thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length: Maximum 12 Meters with Regular Range Colours fixed with Suitable Bolts, nuts and washers, including fixing of wind ties as per the requirement etc., and including cost and conveyance of all materials etc., complete (with / without Ridges/ valley gutters) for finished Item of work as directed. (cost of wind ties and its fabrication charges are not included)
20
796
15938
Maintenance and Repair works to Higher Type quarters i.e., NC Type and C2 Type quarters at Goleti To;Dismantling G.I sheets, AC Sheets in Sides and Roof including ridging etc.,
20
71
1438
Maintenance and Repair works to Higher Type quarters i.e., NC Type and C2 Type quarters at Goleti To;Labour charges for fixing AC sheets for Roofing/Side sheeting including cost of 8mm dia J bolts and nuts, Bitumen washers, 8mm dia plain GI washers including fixing of wind ties as per the requirement etc., (with /without Ridges) complete for finished Item of work (cost of wind ties and its fabrication charges are not included)
20
108
2176
Maintenance and Repair works to Higher Type quarters i.e., NC Type and C2 Type quarters at Goleti To;Roofing/Side sheeting with A.C corrugated sheets 6mm thick including cost and conveyance of AC Sheets, 8mm dia G.I J bolts, GI washers, bitumen washers and labour charges including fixing of wind ties as per the requirement etc., complete (with /without Ridges / Valley gutters) for finished item of work (cost of wind ties and its fabrication charges are not included)
20
404
8098
Maintenance and Repair works to Higher Type quarters i.e., NC Type and C2 Type quarters at Goleti To;Grouting of cracks in walls with CM 1:4, 40mm wide and 25mm deep for finished Item of work ( But Excluding Cost of Cement )
50
47
2375.5
Maintenance and Repair works to Higher Type quarters i.e., NC Type and C2 Type quarters at Goleti To;Providing gultha in CM 1:6, 20 mm thick and 150 mm wide including necessary scraping of wall and finishing the surface as directed ( But Excluding Cost of Cement )
100
35
3526
Maintenance and Repair works to Higher Type quarters i.e., NC Type and C2 Type quarters at Goleti To;Plastering to Ceiling with cement mortar 1:3, 12mm thick ( But Excluding Cost of Cement )
100
170
17098
Maintenance and Repair works to Higher Type quarters i.e., NC Type and C2 Type quarters at Goleti To;Plastering to brick / stone masonry with cement mortar 1:6, 20 mm thick in two coats including raking out of joints for walls only ( But Excluding Cost of Cement )
500
323
161890
Maintenance and Repair works to Higher Type quarters i.e., NC Type and C2 Type quarters at Goleti To;Plastering to brick masonry with cement mortar 1:6, 12mm thick including raking out of joints ( But Excluding Cost of Cement )
400
157
62832
Maintenance and Repair works to Higher Type quarters i.e., NC Type and C2 Type quarters at Goleti To;Providing coping with fly ash brick masonry with bricks of 50 Kg/Sq.Cm. compressive strength over 225 mm thick brick walls with 340x340mm square pillars up to 3m c/c with brick in CM1:6 over the entire length including pillar portion and plastering the sides and bottom with cement mortar 1:6,12mm thick , and top with 12mm thick at ends and 20mm thick at center etc., ( But Excluding Cost of Cement ) complete:
5
8669
43349.75
Maintenance and Repair works to Higher Type quarters i.e., NC Type and C2 Type quarters at Goleti To;Binding wall 225 x 225mm size with brick in cement mortar 1:6 with fly ash bricks of compressive strength 50Kg/cm2 with 20mm thick plastering with cement mortar 1:6, without cornice (But Excluding Cost of Cement )
10
529
5296.7
Maintenance and Repair works to Higher Type quarters i.e., NC Type and C2 Type quarters at Goleti To;Flyash Brick masonry with solid blocks of size 290x225x140mm with 50kg/cm2 Compressive strength in C.M.1:6 for superstructure including scaffolding etc., (But Excluding Cost of Cement ) complete.
5
6598
32990.15
Maintenance and Repair works to Higher Type quarters i.e., NC Type and C2 Type quarters at Goleti To;Flyash Brick masonry with bricks of size 225x100x60mm with 50kg/cm2 Compressive strength in C.M.1:6 for superstructure including scaffolding etc., (But Excluding Cost of Cement) complete.
10
7297
72976.4
Maintenance and Repair works to Higher Type quarters i.e., NC Type and C2 Type quarters at Goleti To;Providing RCM Screen wall (parada wall)/ RCM drop walls 50mm thick in CM1:3 including steel reinforcement with 6mm dia @ 150mm c/c both ways and Rabbit wire mesh of 24 gauge 2 layers including necessary centering charges including cost and conveyance of all materials, all labour charges including tying Rabbit wire mesh to the steel reinforcement applying mortar lumps, finishing plastering 12mm in 2 coats of CM 1:4 and CM 1:2 on both faces, sponge finishing, all operational and incidental charges, curing etc., but excluding cost of steel and its fabrication charges and Cost of Cement) complete for finished Item of work as directed.
5
2348
11743
Maintenance and Repair works to Higher Type quarters i.e., NC Type and C2 Type quarters at Goleti To;Providing and fixing of RCC 1:2:4 precast shelves 25mm thick with 6mm dia MS reinforcement at 125mm c/c both ways with 10mm size crushed granite metal of approved hard quality without brackets, including necessary centering charges and plastering with CM 1:3, 12mm thick etc., but excluding cost of steel and Cost of Cement) complete as directed.(Cost of Fabrication of Reinforcement included)
10
339
3393.2
Maintenance and Repair works to Higher Type quarters i.e., NC Type and C2 Type quarters at Goleti To;Labour charges for cutting, bending and binding reinforcement with contractors binding wire, and placing in position as directed by Engineer - in - charge including all leads, etc., complete
0.5
13984
6992.2
Maintenance and Repair works to Higher Type quarters i.e., NC Type and C2 Type quarters at Goleti To;Cement Concrete 1:2:4 with 20mm down size (65% of 20-10mm and 35% of 10-4.75mm) graded Crushed Granite metal of approved hard quality inclusive of shuttering/centering charges for bed blocks, encasing joists/ rails, holdfasts of doors and windows, etc. Complete (But Excluding Cost of Cement) - with concrete mixer (CA : 0.90 Cum, FA:0.45Cum)
5
5555
27779.45
Maintenance and Repair works to Higher Type quarters i.e., NC Type and C2 Type quarters at Goleti To;Cement Concrete 1:3:6 with 40mm down size (50% of 40-20mm, 30% of 20-10mm and 20% of 10-4.75mm) graded Crushed Granite metal of approved hard quality including machine mixing, vibrating, etc., Complete for finished Item of work as directed for Side Walls of Drains or Basement/ Substructure of the Buildings (Excluding Cost of Cement, Centering and shuttering charges) (CA : 0.90 Cum, FA:0.45Cum)
5
4411
22056.45
Maintenance and Repair works to Higher Type quarters i.e., NC Type and C2 Type quarters at Goleti To;Cement Concrete 1:4:8 with 40 mm size Crushed granite metal of approved hard quality in foundations or Plinths etc., Complete (But Excluding Cost of Cement) - with concrete mixer
10
4368
43681.9
Maintenance and Repair works to Higher Type quarters i.e., NC Type and C2 Type quarters at Goleti To;Cement Concrete 1:5:10 with 40 mm size Crushed Granite metal of approved hard quality in foundations or Plinth etc., Complete. (But Excluding Cost of Cement) - with concrete mixer
10
4368
43681.9
Maintenance and Repair works to Higher Type quarters i.e., NC Type and C2 Type quarters at Goleti To;Clearing light jungle / Shrub jungle
500
3
1900
Maintenance and Repair works to Higher Type quarters i.e., NC Type and C2 Type quarters at Goleti To;Filling with excavated earth (excluding rock)/ Sand in trenches, sides of foundations and basement with initial lead in layers not exceeding 15 cm thick, consolidating Each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T and P etc., complete for finished item of work. (APSS NO. 309 and 310) (Excluding cost of sand) - by Manual Means
20
34
690
Maintenance and Repair works to Higher Type quarters i.e., NC Type and C2 Type quarters at Goleti To;Earth work excavation for foundations and depositing on bank for all lifts and with an initial lead up to 50m including all operational, incidental, labour charges such as shoring, sheeting, planking, strutting, etc. complete for finished item of work as per SS - 20 B (APSS 308) - Ordinary Soil-Manual Means -Up to 3 m depth
20
243
4864
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements