The Singareni Collieries Company Limited Tender

DAR quarters;Conveyance charges of CEMENT including loading, unloading and stacking charges for 5 KM lead.

DAR quarters;Plastering to brick masonry with cement mortar 1:6, 12mm thick including raking out of joints ( But Excluding Cost of Cement )

DAR quarters;Flyash Brick masonry with bricks of size 225x100x60mm with 50kg/cm2 Compressive strength in C.M.1:6 for superstructure including scaffolding etc., (But Excluding Cost of Cement) complete.

DAR quarters;Supply of 32mm PPR Clamp conforming to DIN Standards 8077/8092 including transportation of material to anywhere in the State (Excluding Taxes)

DAR quarters;Supply of 32mm PPR Ball Valve conforming to DIN Standards 8077/8092 including transportation of material to anywhere in the State (Excluding Taxes) - For

DAR quarters;Supply of 32mm PPR Union conforming to DIN Standards 8077/8092 including transportation of material to anywhere in the State (Excluding Taxes)

DAR quarters;Supply of 32mm x 25mm x 32mm PPR Reducer Tee conforming to DIN Standards 8077/8092 including transportation of material to anywhere in the State (Excluding Taxes)

DAR quarters;Supply of 32mm PPR End Cap conforming to DIN Standards 8077/8084 to 8092 including transportation of material to anywhere in the State (Excluding Taxes)

DAR quarters;Supply of 32mm PPR Tee conforming to DIN Standards 8077/8084 to 8092 including transportation of material to anywhere in the State (Excluding Taxes)

DAR quarters;Supply of 25mm PPR Tee conforming to DIN Standards 8077/8084 to 8092 including transportation of material to anywhere in the State (Excluding Taxes)

DAR quarters;Supply of 25mm PPR Elbow conforming to DIN Standards 8077/8084 to 8092 including transportation of material to anywhere in the State (Excluding Taxes)

DAR quarters;Supply of 32mm PPR Elbow conforming to DIN Standards 8077/8084 to 8092 including transportation of material to anywhere in the State (Excluding Taxes)

DAR quarters;Supply of 25mm PPR Socket conforming to DIN Standards 8077/8084 including transportation of material to anywhere in the State (Excluding Taxes)

DAR quarters;Supply of 32mm PPR Socket conforming to DIN Standards 8077/8084 including transportation of material to anywhere in the State (Excluding Taxes)

DAR quarters;Supplying, Laying, jointing, welding, fixing and commissioning of PPR pipes (PN-10) conforming to DIN Standards 8077/8078 including transportation of material to anywhere in the State and including fixing necessary fittings like bends, plugs, couplers, junctions, tees, etc with welding the joint as per standard practice Cost of specials will be paid separately. (Excluding Taxes) - 25mm x2.3mm Dia

DAR quarters;Supplying, Laying, jointing, welding, fixing and commissioning of PPR pipes (PN-10) conforming to DIN Standards 8077/8078 including transportation of material to anywhere in the State and including fixing necessary fittings like bends, plugs, couplers, junctions, tees, etc with welding the joint as per standard practice Cost of specials will be paid separately. (Excluding Taxes) - 32mm x2.9mm Dia

DAR quarters;Providing and fixing 30mm thick Solid panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for stiles, and 15mm x 15mm for top and bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame shall be covered with 5mm thick heat moulded PVC â??Câ?? channel of size 30 x 50mm forming stiles, and 5mm thick, 75mm wide PVC sheets for top rail, lock rail and bottom rail on either side, and 10mm (5mm x 2) thick, 20mm wide cross PVC sheet as gap insert for top rail and bottom rail. Paneling of 5mm thick PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles and rails with 30mm wide x 5mm thick PVC sheet beading on either side, and joined together with solvent cement adhesive etc. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the â??Câ?? Channel using PVC solvent adhesive. Complete as per direction of Engineer-in-charge, manufacturerâ??s specification and drawing for finished item of work including the Following Aluminium anodised fittings complete.: Single Shutter as per Approved Make a) 1no.of 200mm long aldrop with 16mm dia shoot. b) 2 nos. 200 to 250mm mm long tower bolt with 10mm dia shoot. c) 2 no. 100 mm to 150 mm long grip handle. d) 3 nos.150 mm long butt hinges.

DAR quarters;Providing and fixing PVC Door Frame of the size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet, mitre cut at two corners and joined with 2Nos. of 150mm long brackets of 15x15mm M.S square tube. The two vertical door profiles are to be reinforced with 19x19mm MS Square tube of 19 gauge. The door frame shall be fixed to the wall using 65/100mm long MS screws through the frame by using PVC fasteners. A minimum of 4Nos. of screws to be provided for Each vertical member and minimum 2nos. for horizontal member etc. complete as per manufacturers specification and direction of Engineer-in-charge for finished item of work as per Approved Make

DAR quarters;Flooring 40mm thick with CC1:2:4 using 20mm Down size ( 65% of 20-10mm and 35% of 10 - 4.75mm ) graded crushed granite metal of approved hard quality on existing concrete base, rendering smooth complete. ( But Excluding Cost of Cement )

DAR quarters;Cement Concrete 1:5:10 with 40 mm size Crushed Granite metal of approved hard quality in foundations or Plinth etc., Complete. (But Excluding Cost of Cement) - with concrete mixer

DAR quarters;Construction of Flyash brick masonry drain with bricks of size 225x 100 x 60mm with 50Kg/cm2 compressive strength 300mm wide and 300mm deep with brick work in CM 1:6, with 225mm thick with brick walls, including excavation, and laying of 100mm thick and 900mm wide CC 1:5:10 bed, with 40 mm Crushed Granite metal, plastering the surfaces with CM 1:6; 12mm thick including finishing smooth with trowel etc., ( But Excluding Cost of Cement ) complete.

DAR quarters;Supply of Structural Steel Angles/Channels/Beams/ Square Bars for the month of October- 2023(Inclusive of 13.615% CP and OH)

DAR quarters;Roofing/Side sheeting with A.C corrugated sheets 6mm thick including cost and conveyance of AC Sheets, 8mm dia G.I J bolts, GI washers, bitumen washers and labour charges including fixing of wind ties as per the requirement etc., complete (with /without Ridges / Valley gutters) for finished item of work (cost of wind ties and its fabrication charges are not included)

DAR quarters;Whiting to OLD ceiling with Surya cem / Equivalent Cem, two coats to give an even shade complete for finished item of work.

DAR quarters;Demolition of Brick / Stone masonry in Cement Mortar through Manual means including stacking of serviceable materials and disposal of unserviceable materials within 100mts lead.

DAR quarters;Binding wall 225x225mm size with brick in cement mortar 1:6 with fly ash bricks of compressive strength 50Kg/cm2 with 20mm thick plastering with cement mortar 1:6, with cornice 100x 100mm ( But Excluding Cost of Cement )

DAR quarters;Painting to Iron work with two coats of synthetic enamel paint of grade II of Approved Make and shade including a base Coat of Red oxide primer paint of grade -I of Approved Make making 3 coats - To new work -all complete for finished item of work.

DAR quarters;Labour Charges for Fixing of window grills, compound wall grills, Iron Doors, windows, Verandah grils, and window guard bars in position etc., complete.

DAR quarters;Labour Charges for Fabrication of steel works like window grills, compound wall grills, Iron Doors, windows, Verandah grils and window guard bars including cost of welding rods, power charges etc., ( Excluding cost of fixing in position)

DAR quarters;Erecting companys steel purlins, louvers, sag rods, rafters etc., with contractors tackle, derric, crane etc., complete

DAR quarters;Fabrication of structural steel components like purlins, louvers, sag rods, rafters etc., including all leads and lifts at site etc., with companys steel sections but with contractors welding rods, bolts, rivets and all contingencies, power charges, etc., complete as per drawings and instructions of the Engineer in charge.

DAR quarters;Roofing/side sheeting with Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.50mm thickness, Coating: Alu-Zinc coating AZ150 GSM. Tensile Strength: 550 MPA. Paint coating: Regular Modified Polyester painting. Painting Thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length: Maximum 12 Meters with Regular Range Colours fixed with Suitable Bolts, nuts and washers, including fixing of wind ties as per the requirement etc., and including cost and conveyance of all materials etc., complete (with / without Ridges/ valley gutters) for finished Item of work as directed. (cost of wind ties and its fabrication charges are not included)

DAR quarters;Dismantling G.I sheets, AC Sheets in Sides and Roof including ridging etc.,