The Singareni Collieries Company Limited Tender

Maintenance and repair works to T2 41 to T2 600 at Zone III;Construction of 450mm x 450mm and 450mm depth Inspection Chamber with CC 1:4:8 base of 150mm thick 40 mm Crushed Granite metal and 225 mm thick Brick masonary walls in CM 1:6 with fly ash bricks of size 225 x 100 x 60mm with 50kg/Sq. Cm Compressive strength and plastering with CM 1:4; 12mm thick including rendering the surfaces smooth both inside and outside and channelling to required slope including supply and fixing precast RCC 1:2:4 cover of 50mm thick and 600 X 600mm size with 20mm down size (65% of 20-10mm and 35% of 10-4.75mm) graded Crushed Granite metal, including earthwork excavation to the required depth etc; complete for finished item of work (but excluding cost of cement steel and its fabrication charges.)

Maintenance and repair works to T2 41 to T2 600 at Zone III;Extra depth of Circular Man Hole of Size 900mm dia( Excluding Rock cutting) beyond 450mm depth (Excluding cost of cement) Extra for every 0.100m(100mm) depth

Maintenance and repair works to T2 41 to T2 600 at Zone III;Construction of 900mm dia and 450mm depth circular manhole with CC 1:4:8 base of 150mm thick with 40 mm Crushed Granite metal, 225mm thick Brick masonry walls in C.M 1:6 with Flyash bricks of size 225X100x60mm and having compressive strength of 50 kg/sqcm, plastering with CM 1:4,12mm thick including rendering the surfaces smooth both inside and outside and benching with 100mm thick CC 1:2:4 with 20mm down size (65% of 20-10mm and 35% of 10-4.75mm) graded Crushed Granite metal and channelling to required slope including supply and fixing precast RCC 1:2:4 cover of 50mm thick and 600mm dia using 20mm down size (65% of 20-10mm and 35% of 10-4.75mm) graded Crushed Granite metal, including earth work excavation to the required depth etc. complete for finished item of work (but excluding cost of cement, steel and its fabrication charges.)

Maintenance and repair works to T2 41 to T2 600 at Zone III;Supplying, laying, fixing and commissioning the SWR pipes of Prince/Sudhakar/ Kisan/ Supreme or any ISI Brand SWR Pipe (as per ISI- standards) Type - B Pipes (PVC/SWR pipe - 6 Kg/sq.cm) for soil and sullage water of any diameter including fixing necessary fittings like bends, plugs, couplers, junctions, tees, etc with solvent jointing as per standard practice excluding cost of fittings. - For 110mm dia 3M Single socket pipe

Maintenance and repair works to T2 41 to T2 600 at Zone III;Supply and fixing of PVC low level Cistern with internal components and short bend 10 Ltrs capacity Single flush

Maintenance and repair works to T2 41 to T2 600 at Zone III;Supply and fixing best Indian make plastic seat and lid for European water closets with rubber or plastic Buffers as per IS 2548-1996

Maintenance and repair works to T2 41 to T2 600 at Zone III;Supplying and fixing wash down European water closet of first quality conforming to IS 2556-Part-2-2004 of white glazed with P trap. Plastic seat and lid is to be paid extra.

Maintenance and repair works to T2 41 to T2 600 at Zone III;Labour charges for cutting, bending and binding reinforcement with contractors binding wire, and placing in position as directed by Engineer - in - charge including all leads, etc., complete

Maintenance and repair works to T2 41 to T2 600 at Zone III;Painting to wood work/ Plastered Surfaces with Two coats of synthetic enamel paints of grade II of Approved Make, shade- to old works - complete for finished item of work.

Maintenance and repair works to T2 41 to T2 600 at Zone III;White washing to Old walls with Surya Cem / Equivalent Cem, two coats complete for finished item of work.

Maintenance and repair works to T2 41 to T2 600 at Zone III;Supplying and fixing 580 x 440mm Orissa pan white glazed W.C first quality ISI marked conforming to IS 2556 - part 3- 2004 with P or S trap

Maintenance and repair works to T2 41 to T2 600 at Zone III;Supplying and fixing 150mm x100mm SWG gully traps Conforming to IS- 651 and 4127 with C.I Grating and Constg. Brick masonry in CM 1:6 prop. including plastering and fitted with 304.8mm x288.6mm(12 Inchesx9 Inches) C.I Frame and hinged cover including earth work excavation (excluding cost of Cement)

Maintenance and repair works to T2 41 to T2 600 at Zone III;Grouting of cracks in walls with CM 1:4, 40mm wide and 25mm deep for finished Item of work ( But Excluding Cost of Cement )

Maintenance and repair works to T2 41 to T2 600 at Zone III;Plastering to Ceiling with cement mortar 1:3, 12mm thick ( But Excluding Cost of Cement )

Maintenance and repair works to T2 41 to T2 600 at Zone III;Plastering to brick masonry with cement mortar 1:6, 12mm thick including raking out of joints ( But Excluding Cost of Cement )

Maintenance and repair works to T2 41 to T2 600 at Zone III;Flooring 40mm thick with CC1:2:4 using 20mm Down size ( 65% of 20-10mm and 35% of 10 - 4.75mm ) graded crushed granite metal of approved hard quality on existing concrete base, rendering smooth complete. ( But Excluding Cost of Cement )

Maintenance and repair works to T2 41 to T2 600 at Zone III;Painting to Iron work with two coats of synthetic enamel paint of grade II of Approved Make and shade including a base Coat of Red oxide primer paint of grade -I of Approved Make making 3 coats - To new work -all complete for finished item of work.

Maintenance and repair works to T2 41 to T2 600 at Zone III;Supply, Fabrication and fixing of door frame made of Angle iron of size 40x40x 6mm with one coat of Red oxide grade-I primer with the following MS fittings (Excluding Cost of Bed Blocks)(The Steel Sections etc., required will have to be procured by the contractor only and Steel will not be issued by the department) 1). 6nos. M.S. Z type hold fasts made out of 15x3mm flat of 100mm long fixed in CC 1:2:4 bed blocks (150 x 100x 100mm) 2) 10mm dia tie rod at the bottom with necessary nuts at the ends of Each side 3). 1no.stopper hinge per leaf 75mm medium duty 4). 4 No.s 300mm long T-Hinges

Maintenance and repair works to T2 41 to T2 600 at Zone III;Supply and fixing of Cement Bonded Particle Board (IS 14862) door shutters using with 16MM thick with all round style â??Uâ?? lipping size of 20mm x18mm x20mm made from 0.6mm thick galvanized pre-painted cold rolled steel profiles with Cement Bonded Particle Board separating two shutter with 30mm x20mm x30mm Stepped lipping including cost and conveyance of all materials at site and applying one coat of primer, 2 coats of luppam and 2 coats of synthetic enamel paint as per approved design for finished item of work - BISON PANEL(IS 14276) DOUBLE DOOR SHUTTER with necessary screws fixed at every 1foot (304.8mm) intervals and including the following MS powder coated fittings. etc., complete finished item of work as per Approved Make a). 250 mm long aldrops 2nos. b). 250mm long tower bolt with 10mm dia shoot- 2nos c). 2nos 125 mm long grip handle d) 2 Nos. Door Stopper

Maintenance and repair works to T2 41 to T2 600 at Zone III;Supply and fixing of Cement bonded Particle BOARD (conforming to IS 14862) door shutter with all-round style â??Uâ?? lipping size 15 x 18 x 15 mm made from 0.8mm thick powder coated cold rolled steel profiles with 16 mm thick Cement bonded Particle BOARD with necessary screws fixed at 1â??-0â?? interval including cost and conveyance of all materials at site and applying 1 coat of primer, 2 coats of luppum and 2 coats of synthetic enamel paint with following MS powder coated fittings as per approved design for finished item of work - SINGLE SHUTTER as per Approved Make a). MS Nickel coated coated 250mm long aldrops 2 nos , b). MS powder coated 250mm long tower bolt with 10mm dia shoot- 1 nos, c). 1no. MS powder coated 150mm long grip handle, d). 1nos. M.S. Powder coated Door stopper.

Maintenance and repair works to T2 41 to T2 600 at Zone III;Flyash Brick masonry with bricks of size 225x100x60mm with 50kg/cm2 Compressive strength in C.M.1:6 for superstructure including scaffolding etc., (But Excluding Cost of Cement) complete.

Maintenance and repair works to T2 41 to T2 600 at Zone III;Cement Concrete 1:4:8 with 40 mm size Crushed granite metal of approved hard quality in foundations or Plinths etc., Complete (But Excluding Cost of Cement) - with concrete mixer

Maintenance and repair works to T2 41 to T2 600 at Zone III;Filling with excavated earth (excluding rock)/ Sand in trenches, sides of foundations and basement with initial lead in layers not exceeding 15 cm thick, consolidating Each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T and P etc., complete for finished item of work. (APSS NO. 309 and 310) (Excluding cost of sand) - by Manual Means

Maintenance and repair works to T2 41 to T2 600 at Zone III;Earth work excavation for foundations and depositing on bank for all lifts and with an initial lead up to 50m including all operational, incidental, labour charges such as shoring, sheeting, planking, strutting, etc. complete for finished item of work as per SS - 20 B (APSS 308) - Ordinary Soil-Manual Means -Up to 3 m depth