The Singareni Collieries Company Limited Tender

Repair works to GT Hostel at centenary colony RG III area;Supply of Structural steel flats for the month of November - 2024 (Inclusive of 13.615% CP and OH)

Repair works to GT Hostel at centenary colony RG III area;Flooring 40mm thick with CC1:2:4 using 20mm Down size ( 65% of 20-10mm and 35% of 10 - 4.75mm ) graded crushed granite metal of approved hard quality on existing concrete base, rendering smooth complete. ( But Excluding Cost of Cement )

Repair works to GT Hostel at centenary colony RG III area;Clearing light jungle / Shrub jungle

Repair works to GT Hostel at centenary colony RG III area;Supplying, laying, fixing and commissioning the SWR pipes of Prince / Sudhakar / Kisan / Supreme or any ISI Brand SWR Pipe (as per ISI - standards) Type - A pipes (PVC / SWR pipe - 4Kg / sq.cm ) for rain water and vent pipes of any diameter including fixing necessary fittings like bends, plugs, couplers, junctions, tees, etc with solvent jointing as per standard practice excluding cost of fittings - For 110mm dia 3M Double socket pipe

Repair works to GT Hostel at centenary colony RG III area;Painting to Wood work/ Plastered Surfaces with two coats of synthetic enamel paint of grade II of Approved Make and shade including a base Coat of wood primer of Approved Make making 3 coats - To new work -all complete for finished item of work.

Repair works to GT Hostel at centenary colony RG III area;Conveyance charges of CEMENT including loading, unloading and stacking charges for Beyond 5KM and upto 30KM(Rate/KM) lead.

Repair works to GT Hostel at centenary colony RG III area;Conveyance charges of CEMENT including loading, unloading and stacking charges for 5 KM lead.

Repair works to GT Hostel at centenary colony RG III area;Acrylic exterior emulsion Painting to New walls with Grade-II i.e., Ace or equivalent paint of Approved Make 2 coats over a base coat of Grade -II primer (making 3 coats in all) complete for finished Item of work -For External Walls

Repair works to GT Hostel at centenary colony RG III area;Oil bound Distempering to New walls with 2 coats of Approved Make distemper over a base coat of Grade -1 primer (making 3 coats in all) complete for finished Item of work.

Repair works to GT Hostel at centenary colony RG III area;Supply and fixing 12mm thick window shutters with plain Cement bonded particle board (bison panel or equivalent) conforming to IS 14276 with alround U section of size 12x18mm x 12mm made from 0.60mm thick galvanised colour coated cold rolled steel profiles with necessary srews fixed at every 1foot (304.8mm) intervals, fixing to the existing angle iron frame along with the following MS Powder coated fittings of approved make and applying 1coat of primer, one coat of luppam and 2 coats of Synthetic enamel paints as per approved design including cost and conveyance of all materials to site, all labour charges etc., complete for finished Item of work as directed. a) 150mm tower bolts with 10mm dia shoot - 1No.s per leaf b) 125mm long grip handles - 1No. per leaf c) 250mm long window casements- 1No. per leaf d) 200mm to 225mm long T- hinges 2nos per leaf

Repair works to GT Hostel at centenary colony RG III area;Providing Antitermite treatment (Post-constructional chemical treatment measures) at points of contact of wood work by chemical emulsion Chlorpyriphos/ Lindane (in oil or kerosene based solution) @ 0.5 litres per hole by drilling 6 mm dia holes at downward angle of 45 degree at 150 mm centre to centre and sealing the same.

Repair works to GT Hostel at centenary colony RG III area;Providing Anti - termite treatment (Post-constructional chemical treatment measures) of existing masonry using chemical emulsion @ one litre per hole, 300 mm interval including drilling holes at 45 degree and plugging them with cement mortar 1:2 (1 cement : 2 coarse sand) to the full depth of the hole: With Chlorpyriphos/Lindane E.C. 20% with 1% concentration

Repair works to GT Hostel at centenary colony RG III area;Supply, Fabrication and fixing of door frame made of Angle iron of size 40x40x 6mm with one coat of Red oxide grade-I primer with the following MS fittings (Excluding Cost of Bed Blocks)(The Steel Sections etc., required will have to be procured by the contractor only and Steel will not be issued by the department) 1). 6nos. M.S. Z type hold fasts made out of 15x3mm flat of 100mm long fixed in CC 1:2:4 bed blocks (150 x 100x 100mm) 2) 10mm dia tie rod at the bottom with necessary nuts at the ends of Each side 3). 1no.stopper hinge per leaf 75mm medium duty 4). 4 No.s 300mm long T-Hinges

Repair works to GT Hostel at centenary colony RG III area;Plastering to brick masonry with cement mortar 1:6, 12mm thick including raking out of joints ( But Excluding Cost of Cement )

Repair works to GT Hostel at centenary colony RG III area;Flyash Brick masonry with bricks of size 225x100x60mm with 50kg/cm2 Compressive strength in C.M.1:6 for superstructure including scaffolding etc., (But Excluding Cost of Cement) complete.

Repair works to GT Hostel at centenary colony RG III area;Dismantling G.I sheets, AC Sheets in Sides and Roof including ridging etc.,

Repair works to GT Hostel at centenary colony RG III area;Roofing/side sheeting with Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.50mm thickness, Coating: Alu-Zinc coating AZ150 GSM. Tensile Strength: 550 MPA. Paint coating: Regular Modified Polyester painting. Painting Thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length: Maximum 12 Meters with Regular Range Colours fixed with Suitable Bolts, nuts and washers, including fixing of wind ties as per the requirement etc., and including cost and conveyance of all materials etc., complete (with / without Ridges/ valley gutters) for finished Item of work as directed. (cost of wind ties and its fabrication charges are not included)

Repair works to GT Hostel at centenary colony RG III area;Flooring with Non-skid Ceramic floor tiles of size 400 x 400 mm and thickness between 7-8 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs for required areas using different sizes, approved colour and make, fixing with epoxy emulsion grout/ synthetic / resin adhesive in width of 3-5 mm with Nylon spacers of Specified thickness without joint, including cost and conveyance of all materials, labour charges etc., complete for finished item of work,

Repair works to GT Hostel at centenary colony RG III area;Providing skirting /risers of steps with ceramic wall tiles of size 200 x 300mm / 245mm x 325mm with 6 mm thick 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs and length equal to flooring tiles, set over base coat of CM (1:3) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost and conveyance of all materials, labour charges etc., complete for finished item of work,( But Excluding Cost of Cement )

Repair works to GT Hostel at centenary colony RG III area;Cement Concrete 1:4:8 with 40 mm size Crushed granite metal of approved hard quality in foundations or Plinths etc., Complete (But Excluding Cost of Cement) - with concrete mixer

Repair works to GT Hostel at centenary colony RG III area;Earth work excavation for foundations and depositing on bank for all lifts and with an initial lead up to 50m including all operational, incidental, labour charges such as shoring, sheeting, planking, strutting, etc. complete for finished item of work as per SS - 20 B (APSS 308) - Ordinary Soil-Manual Means -Up to 3 m depth

Repair works to GT Hostel at centenary colony RG III area;Labour Charges for Fixing of window grills, compound wall grills, Iron Doors, windows, Verandah grils, and window guard bars in position etc., complete.

Repair works to GT Hostel at centenary colony RG III area;Labour Charges for Fabrication of steel works like window grills, compound wall grills, Iron Doors, windows, Verandah grils and window guard bars including cost of welding rods, power charges etc., ( Excluding cost of fixing in position)

Repair works to GT Hostel at centenary colony RG III area;Supply and fixing of Cement Bonded Particle Board (IS 14862) door shutters using with 16MM thick with all round style â??Uâ?? lipping size of 20mm x18mm x20mm made from 0.6mm thick galvanized pre-painted cold rolled steel profiles with Cement Bonded Particle Board separating two shutter with 30mm x20mm x30mm Stepped lipping including cost and conveyance of all materials at site and applying one coat of primer, 2 coats of luppam and 2 coats of synthetic enamel paint as per approved design for finished item of work - BISON PANEL(IS 14276) DOUBLE DOOR SHUTTER with necessary screws fixed at every 1foot (304.8mm) intervals and including the following MS powder coated fittings. etc., complete finished item of work as per Approved Make a). 250 mm long aldrops 2nos. b). 250mm long tower bolt with 10mm dia shoot- 2nos c). 2nos 125 mm long grip handle d) 2 Nos. Door Stopper

Repair works to GT Hostel at centenary colony RG III area;Demolishing Plain Cement Concrete through Manual means and disposal of unserviceable materials within 100 metres lead - upto 15 cm thickness.

Repair works to GT Hostel at centenary colony RG III area;Dismantling doors, windows, ventilators etc. (wood or steel) shutters including frames through Manual means complete and stacking them within 100 metre lead.