The Singareni Collieries Company Limited Tender

M and R works to II nd Zone;Demolishing Plain Cement Concrete through Manual means and disposal of unserviceable materials within 100 metres lead - upto 15 cm thickness.

M and R works to II nd Zone;Demolition of Brick / Stone masonry in Cement Mortar through Manual means including stacking of serviceable materials and disposal of unserviceable materials within 100mts lead.

M and R works to II nd Zone;Dismantling / Removing old Cement mortar plaster through Manual means

M and R works to II nd Zone;Supplying and fixing 580 x 440mm Orissa pan white glazed W.C first quality ISI marked conforming to IS 2556 - part 3- 2004 with P or S trap

M and R works to II nd Zone;Supplying, laying, fixing and commissioning the SWR pipes of Prince / Sudhakar / Kisan / Supreme or any ISI Brand SWR Pipe (as per ISI - standards) Type - A pipes (PVC / SWR pipe - 4Kg / sq.cm ) for rain water and vent pipes of any diameter including fixing necessary fittings like bends, plugs, couplers, junctions, tees, etc with solvent jointing as per standard practice excluding cost of fittings - For 110mm dia 3M Double socket pipe

M and R works to II nd Zone;Providing Dadooing to walls with ceramic wall tiles of size 200x300mm / 245mm x 325 mm and thickness 6 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs, set over base coat of CM (1:3) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost and conveyance of all materials, labour charges etc., complete for finished item of work,( But Excluding Cost of Cement )

M and R works to II nd Zone;Erecting companys steel purlins, louvers, sag rods, rafters etc., with contractors tackle, derric, crane etc., complete

M and R works to II nd Zone;Fabrication of structural steel components like purlins, louvers, sag rods, rafters etc., including all leads and lifts at site etc., with companys steel sections but with contractors welding rods, bolts, rivets and all contingencies, power charges, etc., complete as per drawings and instructions of the Engineer in charge.

M and R works to II nd Zone;Painting to Iron work with two coats of synthetic enamel paint of grade II of Approved Make and shade including a base Coat of Red oxide primer paint of grade -I of Approved Make making 3 coats - To new work -all complete for finished item of work.

M and R works to II nd Zone;Painting to wood work/ Plastered Surfaces with Two coats of synthetic enamel paints of grade II of Approved Make, shade- to old works - complete for finished item of work.

M and R works to II nd Zone;White washing to Old walls with Surya Cem / Equivalent Cem, two coats complete for finished item of work.

M and R works to II nd Zone;White washing to New walls with Surya Cem / Equivalent Cem two coats complete for finished item of work.

M and R works to II nd Zone;Dismantling G.I sheets, AC Sheets in Sides and Roof including ridging etc.,

M and R works to II nd Zone;Roofing/Side sheeting with A.C corrugated sheets 6mm thick including cost and conveyance of AC Sheets, 8mm dia G.I J bolts, GI washers, bitumen washers and labour charges including fixing of wind ties as per the requirement etc., complete (with /without Ridges / Valley gutters) for finished item of work (cost of wind ties and its fabrication charges are not included)

M and R works to II nd Zone;Labour Charges for Fixing of window grills, compound wall grills, Iron Doors, windows, Verandah grils, and window guard bars in position etc., complete.

M and R works to II nd Zone;Labour Charges for Fabrication of steel works like window grills, compound wall grills, Iron Doors, windows, Verandah grils and window guard bars including cost of welding rods, power charges etc., ( Excluding cost of fixing in position)

M and R works to II nd Zone;Supply of Structural Steel Angles/Channels/Beams/ Square Bars for the month of May-2022 (Inclusive of 13.615% CP and OH)

M and R works to II nd Zone;Supply and fixing 12mm thick window shutters with plain Cement bonded particle board (bison panel or equivalent) conforming to IS 14276 with alround U section of size 12x18mm x 12mm made from 0.60mm thick galvanised colour coated cold rolled steel profiles with necessary srews fixed at every 1foot (304.8mm) intervals, fixing to the existing angle iron frame along with the following MS Powder coated fittings of approved make and applying 1coat of primer, one coat of luppam and 2 coats of Synthetic enamel paints as per approved design including cost and conveyance of all materials to site, all labour charges etc., complete for finished Item of work as directed. a) 150mm tower bolts with 10mm dia shoot - 1No.s per leaf b) 125mm long grip handles - 1No. per leaf c) 250mm long window casements- 1No. per leaf d) 200mm to 225mm long T- hinges 2nos per leaf

M and R works to II nd Zone;Supply and fixing of Cement Bonded Particle Board (IS 14862) door shutters using with 16MM thick with all round style â??Uâ?? lipping size of 20mm x18mm x20mm made from 0.6mm thick galvanized pre-painted cold rolled steel profiles with Cement Bonded Particle Board separating two shutter with 30mm x20mm x30mm Stepped lipping including cost and conveyance of all materials at site and applying one coat of primer, 2 coats of luppam and 2 coats of synthetic enamel paint as per approved design for finished item of work - BISON PANEL(IS 14276) DOUBLE DOOR SHUTTER with necessary screws fixed at every 1foot (304.8mm) intervals and including the following MS powder coated fittings. etc., complete finished item of work as per Approved Make a). 250 mm long aldrops 2nos. b). 250mm long tower bolt with 10mm dia shoot- 2nos c). 2nos 125 mm long grip handle d) 2 Nos. Door Stopper

M and R works to II nd Zone;Supply and fixing of Cement bonded Particle BOARD (conforming to IS 14862) door shutter with all-round style â??Uâ?? lipping size 15 x 18 x 15 mm made from 0.8mm thick powder coated cold rolled steel profiles with 16 mm thick Cement bonded Particle BOARD with necessary screws fixed at 1â??-0â?? interval including cost and conveyance of all materials at site and applying 1 coat of primer, 2 coats of luppum and 2 coats of synthetic enamel paint with following MS powder coated fittings as per approved design for finished item of work - SINGLE SHUTTER as per Approved Make a). MS Nickel coated coated 250mm long aldrops 2 nos , b). MS powder coated 250mm long tower bolt with 10mm dia shoot- 1 nos, c). 1no. MS powder coated 150mm long grip handle, d). 1nos. M.S. Powder coated Door stopper.

M and R works to II nd Zone;Supply and fixing minimum of 15mm thick polished Black Kadapa single slab of required size as directed by the Engineer-in-charge with exposed faces square cut and well polished, over 12mm thick CM 1:4 base coat on existing Concrete, with grey Cement Slurry of honey like consistency spread at the rate of 3.30Kg./Sqm. including cost and conveyance all materials and water to work site and cost of base coat, all operational, incidental, labour charges such as mixing mortar, dressing and fixing of stones in position rubbing curing etc., complete for kitchen platforms / window sills as directed (But Excluding Cost of Cement)

M and R works to II nd Zone;Flooring 40mm thick with CC1:2:4 using 20mm Down size ( 65% of 20-10mm and 35% of 10 - 4.75mm ) graded crushed granite metal of approved hard quality on existing concrete base, rendering smooth complete. ( But Excluding Cost of Cement )

M and R works to II nd Zone;Cement Concrete 1:2:4 with 20mm down size (65% of 20-10mm and 35% of 10-4.75mm) graded Crushed Granite metal of approved hard quality inclusive of shuttering/centering charges for bed blocks, encasing joists/ rails, holdfasts of doors and windows, etc. Complete (But Excluding Cost of Cement) - with concrete mixer (CA : 0.90 Cum, FA:0.45Cum)

M and R works to II nd Zone;Cement Concrete 1:5:10 with 40 mm size Crushed Granite metal of approved hard quality in foundations or Plinth etc., Complete. (But Excluding Cost of Cement) - with concrete mixer

M and R works to II nd Zone;Binding wall 225x225mm size with brick in cement mortar 1:6 with fly ash bricks of compressive strength 50Kg/cm2 with 20mm thick plastering with cement mortar 1:6, with cornice 100x 100mm ( But Excluding Cost of Cement )

M and R works to II nd Zone;Flyash Brick masonry with bricks of size 225x100x60mm with 50kg/cm2 Compressive strength in C.M.1:6 for superstructure including scaffolding etc., (But Excluding Cost of Cement) complete.

M and R works to II nd Zone;Providing gultha in CM 1:6, 20 mm thick and 150 mm wide including necessary scraping of wall and finishing the surface as directed ( But Excluding Cost of Cement )

M and R works to II nd Zone;Plastering to brick masonry with cement mortar 1:4, 12mm thick including raking out of joints ( But Excluding Cost of Cement )

M and R works to II nd Zone;Plastering to brick / stone masonry with cement mortar 1:6, 20 mm thick in two coats including raking out of joints for walls only ( But Excluding Cost of Cement )