The Singareni Collieries Company Limited Tender

replacement of doors and windows at cnc;Supply, Fabrication and fixing of door frame made of Angle iron of size 40x40x 6mm with one coat of Red oxide grade-I primer with the following MS fittings (Excluding Cost of Bed Blocks)(The Steel Sections etc., required will have to be procured by the contractor only and Steel will not be issued by the department) 1). 6nos. M.S. Z type hold fasts made out of 15x3mm flat of 100mm long fixed in CC 1:2:4 bed blocks (150 x 100x 100mm) 2) 10mm dia tie rod at the bottom with necessary nuts at the ends of Each side 3). 1no.stopper hinge per leaf 75mm medium duty 4). 4 No.s 300mm long T-Hinges

replacement of doors and windows at cnc;Supply and fixing M S powder coated fittings including necessary bolts and nuts etc. complete for finished item of work as directed - For 300mm Long T- Hinges

replacement of doors and windows at cnc;Supply and fixing of Bed room cup board frames and shutters using 16mm thick prelaminated (Bison pre lam or equivalent) Cement bonded board as per the approved Drawing with the following components. . 1). The frame is of size 100mm x 32mm with one 16mm thick plain strip and one 16mm thick pre laminated strip. Both strips joined by means of glue and screws. The frame is fixed to the wall by means of screws of size 100mm. Teak wood beading of 32mm x 6mm thick is to be fixed alround the frame work (Both sides). 2). The openable shutters are made of 16mm thick pre laminated board.Teak wood beading of 16mm x 6mm thick is to be fixed on 4 sides of the shutters. Shutters are to be fixed to the frame by means of heavy duty MS Powder coated piano hinges. Decorative teak beading of approved design and of size 12mm x 6mm is to be fixed to the face side of openable shutters as per approved drawing. 3). Sliding shutters are made of 10mm thick prelaminated boards. Shutters are to be fitted in the Aluminium track of size 32mm x 6mm by using nickle coated sliding rollers of suitable size. 4). The cost is inclusive of M.S.Powder coated Piano hinges (IS 3818), nickle coated sliding rollers, brass ball catches, Hasp and Staple 2 Nos, Aluminium anodised tower bolts (IS 204), handles (IS 208), etc., complete.

replacement of doors and windows at cnc;Supply and fixing 30mm thick panelled door shutters with Medium Teak wood bottom rail 150mm wide, lock rail 125mm wide, top rail, freiz rail and styles 100mm wide, panels of 20mm thick including the following Aluminium anodised fittings of approved make, including necessary screws, bolts, nuts etc., complete for finished item of work as directed. - Single Shutter Fittings :- a) 3 nos. 150mm long butt hinges with screws complete b) 1no. tower bolts 200 to 250mm long of 10mm dia rods shoot with screws complete. c) 1 nos. aldrop 300 mm long of 16 mm dia rod d) 2 nos. grip handles 100 to 150mm long. e)1no.Medium teak wood cleat with 75mm hinges with screws etc.,

replacement of doors and windows at cnc;Painting / priming coat with Red oxide iron primer paint of grade-1 of Approved Make to New Iron work - complete for finished item of work.

replacement of doors and windows at cnc;Labour Charges for Fixing of window grills, compound wall grills, Iron Doors, windows, Verandah grils, and window guard bars in position etc., complete.

replacement of doors and windows at cnc;Labour Charges for Fabrication of steel works like window grills, compound wall grills, Iron Doors, windows, Verandah grils and window guard bars including cost of welding rods, power charges etc., ( Excluding cost of fixing in position)

replacement of doors and windows at cnc;Supply and fixing 30 mm thick panelled Window shutters with Medium teak wood including the following Aluminium anodised fittings of approved make. a) 2 nos. of 100 mm long butt hinges per leaf. b) 2nos tower bolts 150mm long with 10mm dia shoot per leaf. c) 1 no. 125 mm long grip handle per leaf. d) 1 no. casement stay (Delux) 200 to 225mm long per leaf.

replacement of doors and windows at cnc;Supplying and fixing 75x75 mm window frame with Medium teak wood with 4nos. M.S. Z type hold fasts made out of 50x3mm M.S. flat of 300 mm long fixed in bed blocks (excluding Cost of bed blocks). Note: Mullions are to be measured and paid.

replacement of doors and windows at cnc;Providing and fixing 30mm thick Solid panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for stiles, and 15mm x 15mm for top and bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame shall be covered with 5mm thick heat moulded PVC â??Câ?? channel of size 30 x 50mm forming stiles, and 5mm thick, 75mm wide PVC sheets for top rail, lock rail and bottom rail on either side, and 10mm (5mm x 2) thick, 20mm wide cross PVC sheet as gap insert for top rail and bottom rail. Paneling of 5mm thick PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles and rails with 30mm wide x 5mm thick PVC sheet beading on either side, and joined together with solvent cement adhesive etc. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the â??Câ?? Channel using PVC solvent adhesive. Complete as per direction of Engineer-in-charge, manufacturerâ??s specification and drawing for finished item of work including the Following Aluminium anodised fittings complete.: Single Shutter as per Approved Make a) 1no.of 200mm long aldrop with 16mm dia shoot. b) 2 nos. 200 to 250mm mm long tower bolt with 10mm dia shoot. c) 2 no. 100 mm to 150 mm long grip handle. d) 3 nos.150 mm long butt hinges.

replacement of doors and windows at cnc;Plastering to brick masonry with cement mortar 1:6, 12mm thick including raking out of joints ( But Excluding Cost of Cement )

replacement of doors and windows at cnc;Flyash Brick masonry with bricks of size 225x100x60mm with 50kg/cm2 Compressive strength in C.M.1:6 for superstructure including scaffolding etc., (But Excluding Cost of Cement) complete.

replacement of doors and windows at cnc;Supplying and fixing 4 mm thick plain float glass panes of saint gobain / modiguard or equivalent make including putty / wooden beading / Rubber beading for wooden / iron windows.

replacement of doors and windows at cnc;Supply and fixing Flush door shutters, solid bond wood block board type with teak ply on both faces.: 30 mm thick conforming to IS:2202 as per Approved Make including the following Aluminium anodised fittings : conforming to relevant IS standards : Single Shutter a) 3 nos. 150 mm long butt hinges. b) 2 nos. 200 mm to 250 mm long tower bolt with 10mm dia shoot. ; c) 1 no. 300mm long aldrop with 16mm dia shoot. d) 2 no. 100 mm to 150 mm long grip handle. e) 1 no. foot door stopper.

replacement of doors and windows at cnc;Supply and fixing Door frame of 100 x75mm with Non teak wood including supply and fixing with 6nos. M.S.Z type hold fasts made out of 50x3mm M.S.flat 300mm long in CC beds, etc., complete. (Excluding Cost of Bed Blocks.)

replacement of doors and windows at cnc;Supply and fixing of Cement Bonded Particle Board (IS 14862) door shutters using with 16MM thick with all round style â??Uâ?? lipping size of 20mm x18mm x20mm made from 0.6mm thick galvanized pre-painted cold rolled steel profiles with Cement Bonded Particle Board separating two shutter with 30mm x20mm x30mm Stepped lipping including cost and conveyance of all materials at site and applying one coat of primer, 2 coats of luppam and 2 coats of synthetic enamel paint as per approved design for finished item of work - BISON PANEL(IS 14276) DOUBLE DOOR SHUTTER with necessary screws fixed at every 1foot (304.8mm) intervals and including the following MS powder coated fittings. etc., complete finished item of work as per Approved Make a). 250 mm long aldrops 2nos. b). 250mm long tower bolt with 10mm dia shoot- 2nos c). 2nos 125 mm long grip handle d) 2 Nos. Door Stopper

replacement of doors and windows at cnc;Supply and fixing of Cement bonded Particle BOARD (conforming to IS 14862) door shutter with all-round style â??Uâ?? lipping size 15 x 18 x 15 mm made from 0.8mm thick powder coated cold rolled steel profiles with 16 mm thick Cement bonded Particle BOARD with necessary screws fixed at 1â??-0â?? interval including cost and conveyance of all materials at site and applying 1 coat of primer, 2 coats of luppum and 2 coats of synthetic enamel paint with following MS powder coated fittings as per approved design for finished item of work - SINGLE SHUTTER as per Approved Make a). MS Nickel coated coated 250mm long aldrops 2 nos , b). MS powder coated 250mm long tower bolt with 10mm dia shoot- 1 nos, c). 1no. MS powder coated 150mm long grip handle, d). 1nos. M.S. Powder coated Door stopper.

replacement of doors and windows at cnc;Dismantling doors, windows, ventilators etc. (wood or steel) shutters including frames through Manual means complete and stacking them within 100 metre lead.