The Singareni Collieries Company Limited Tender

Construction of boundary pillars and fencing around the mine lease area and along the diverted fores;Labour charges for cutting, bending and binding reinforcement with contractors binding wire, and placing in position as directed by Engineer - in - charge including all leads, etc., complete

Construction of boundary pillars and fencing around the mine lease area and along the diverted fores;Supply of Galvanized steel barbed wire Conforming to IS 278 -1978 Type A -4 Point barbs round both line wires 75mm apart with 12 SWG line wire with a minimum mass of 9.38 Kg per 100M.

Construction of boundary pillars and fencing around the mine lease area and along the diverted fores;Barbed Wire fencing 1.40M high with Galvanised steel barbed wire, Conforming to IS 278 -1978 Type A -4 Point barbs round both line wires 75mm apart with 12 SWG line wire with a minimum mass of 9.38 Kg per 100M, 8 horizontal strands at 150mm apart and 2diagonals in between RCC posts in Each bay tied with G.I binding wire on precast RCC 1:2:4 posts of size 100 x100mm and 180cm high at 3m c/c and corner posts and support posts of 100 x100mm at every 10th fencing posts, fixed in CC 1:5:10 base of 450x450x450mm including earthwork excavation for foundation of posts etc., complete as directed. Gap between Ground level and bottom strand should not be more than 150mm. (Excluding Cost Of Cement and G.I Barbed wire and steel reinforcement and its Fabrication charges and Hooks) Note:- The coarse aggregate for casting precast RCC 1:2:4 fencing posts should be 20mm down size (65% of 20-10mm and 35% of 10-4.75mm) graded crushed granite metal and concrete is to be machine mixed and CC 1:5:10 concrete should be with 40mm crushed granite metal.

Construction of boundary pillars and fencing around the mine lease area and along the diverted fores;Acrylic exterior emulsion Painting to New walls with Grade-II i.e., Ace or equivalent paint of Approved Make 2 coats over a base coat of Grade -II primer (making 3 coats in all) complete for finished Item of work -For External Walls

Construction of boundary pillars and fencing around the mine lease area and along the diverted fores;Plastering to brick masonry with cement mortar 1:6, 12mm thick including raking out of joints ( But Excluding Cost of Cement )

Construction of boundary pillars and fencing around the mine lease area and along the diverted fores;Filling with excavated earth (excluding rock)/ Sand in trenches, sides of foundations and basement with initial lead in layers not exceeding 15 cm thick, consolidating Each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T and P etc., complete for finished item of work. (APSS NO. 309 and 310) (Excluding cost of sand) - by Manual Means

Construction of boundary pillars and fencing around the mine lease area and along the diverted fores;Providing and laying insitu vibrated M-15 (28 days cube compressive strength not less than 15N / sq mm) grade cement concrete using 40 mm down size (50% of 40-20mm, 30% of 20-10mm and 20% of 10-4.75mm) clean, graded crushed granite metal of approved quality including machine mixing, vibrating with necessary shuttering and centering charges, etc., Complete for finished Item of work as directed for Filter bed side walls & Retaining walls (Excluding Cost of Cement) (Coarse Aggregate : 0.90 Cum, Fine Aggregate:0.45Cum, cement content: 260 Kg/Cum)

Construction of boundary pillars and fencing around the mine lease area and along the diverted fores;Cement Concrete 1:4:8 with 40 mm size Crushed granite metal of approved hard quality in foundations or Plinths etc., Complete (But Excluding Cost of Cement) - with concrete mixer

Construction of boundary pillars and fencing around the mine lease area and along the diverted fores;Earth work excavation for foundations and depositing on bank for all lifts and with an initial lead up to 50m including all operational, incidental, labour charges such as shoring, sheeting, planking, strutting, etc. complete for finished item of work as per SS - 20 B (APSS 308) - Ordinary soils-Mechanical Means -Up to 3 m depth

Construction of boundary pillars and fencing around the mine lease area and along the diverted fores;Earth work excavation for foundations and depositing on bank for all lifts and with an initial lead up to 50m including all operational, incidental, labour charges such as shoring, sheeting, planking, strutting, etc. complete for finished item of work as per SS - 20 B (APSS 308) - Ordinary Soil-Manual Means -Up to 3 m depth

Construction of boundary pillars and fencing around the mine lease area and along the diverted fores;Clearing light jungle / Shrub jungle