Police Housing Corporation Limited Tender

9 ply-18 mm thick plywood confirming to IS-303 MR Grade and of approved brand pattern design colour and shade of BWR grade on stage under wooden flooring as per drg Including cost and conveyance of all materials like ply wood, stainless steel/brass screws, wood primer to work site. including all operational, incidental and lanbour charges, on all materials, cost of screws, all types of tools plants and machinery hire charges, scaffolding and lift charges etc, including one coat of wood primer etc, but excluding GST, complete for finished item of work and as directed by engineer incharge at all heights as per drawing (for stage work front side in vertical direction /curved shape) including vertical and horizontal wooden/steel pie runners for fixing of plywood and teak veneer on one face

Textile floor carpet over seating area :Providing of Forbo Flotex Flocked floor covering of 4.3mm thickness rolls having a density of 70million fibres of nylon 6.6 perM2, FireTest EN-13501, Appearence Retention Hexapod ISO140-8, Friction Slip Resistance Tes tEN14041Class DS,sanitized anti-micro bial treatment with resilient water proof backing, antiallergic cetrtified by British allergy foundation, antistatic, acoustic alimpact sound should be 20dB and approximate weight of 1.8k.g./sqm of roll form.There action to fire should be asper EN13501-1:Bfl-s1. carpet should be installed after self leveling compound done properly as per company specifications, but excluding GST.

Supply and installation of vinyl sheet flooring, 2metre wide and overall thickness of 2mm.The thickness of wear layer would be 2mm.The product should be homogeneous and single layered.The wear surface shall consist of impregnated polyurethane homogeneous mixture of PVC with TRUESHIELD technology,Plasticizers without DOP, Urethane, color pigment sand filler calendered to form a sheet.Color and pattern details shall be dispersed throughout the thickness of the wear layer. It shall conform to group"T" wear resistance as per EN649, Clean Room certified with class'A'as per ASTMF5100, Flammability resistance of class B fl-s1asper GB8624-2006, Dynamic coefficient of friction of class D Sasper EN13893, Thermal Resistance of 0.072m 2K/WasperEN12667, Thermal conductivity of 0.071W/m KasperEN12524 ,impact sound reduction of 3dBasperISO10140, Slip Resistance of class R9asperDIN51130 ,Residual indentation of 0.03mm as per GB/T4085-2005, Color fastness ratingof≥6 as per ISO105-B02 ,total weight being 2.8kg/m2 as per EN430. The product shall be suitable for applications in class 23/34/43 areas as per EN685. Product shall exhibitant its static behaviour, resistance to bacteria, resistance to chemical ,resistance to staining, suitability to castor chair. Installation-It is important to ensure the subfloor on which the sheet is being laid smooth, flat, hardand free from moisture, grease etc, but excluding GST. In case of uneven subfloor the same should be levelled using self leveling compound. IPS/Vitrified/ceramic/mosaic tiles do not provide zero leveled subfloor. The moisture present in the subfloor should be less than 8% before installation of the floor. The sheet should be installed as per recommended adhesive. The installation shall be undertaken as per manufacturers installation instructions. (between seating chairs)

supplying fabrication erection cutting jointing and fixing of 15mm thick wooden flooring as per approved make colour design pattern shape of premium 1st quality of approved manufacturers on stage with necessary accessories as per drg including cost conveyance of all materials to site , including all operational,incidental and labour charges, all types of tools planta and machinery hire charges scaffolding and lift charges, on all materials, but excluding GST, complete for finished item of work and as directed by engineer incharge

Supplying and fixing of 50mm thick rock wool (48kgs/cum) with aluminum foil on insulation on one side, with 12 gauge GI weld mesh including cost and conveyance of all materials to site, scaffolding and lift charges, all operational incidenatl and labourr charges etc at all heights and levels complete for finished item of work, but excluding GST, and as directed by the site in charge. behind wall pannelling

SUPPLY AND FIXING GYP BOARD SUSPENDED REGULAR SINGLE LAYER FALSE CEILING (GS-MFSC-4.1 AS PER INDIA GYPSUM) USING 12.50 MM THICK GYP BOARD CONFORMING TO IS 2095-1982 FIXING TO GYP STEEL GI PERIMETER CHANNELS OF SIZE 20 X 27 X 30 MM (WEB) OF 0.55 MM THICK ALONG THE PERIMETER OF CEILING SCREW FIXED TO BRICK WORK / PARTITION AT 610 MM C/C AND SUSPENDING THE FRAME WORK USING INTERMEDIATE CHANNELS (45 X 15 X 15 X 0.90 MM) FROM SOFFIT AT 1220 MM C/C WITH CEILING ANGLE (25 X 10 X 0.55 MM) FIXED WITH GI CLEAT AND STEEL EXPANSION FASTENERS & CONNECTING CLIP TO THE CEILING CHANNELS (WITH KNURLED WEB OF 51.50 X 26 X 10.50 X 0.55 MM) FIXED IN DIECTION PERPENDICULAR TO THE INTERMEDIATE CHANNEL AT 457 MM C/C AND FIXING THE 12.50 MM DRYWALL SCEWS AT 230 MM C/C & JOINTING, FIXING USING JOINT COMPOUND AND PAPER TAPE TO HAVE A FLUSH LOOK INCLUDING FILLING THE TAPPERED & SQUARE EDGES WITH JOINTING COMPOUND, TWO COATS OF DRYWALL TOPCOAT COMPLETE, BUT EXCLUDING GST FOR FINISHED ITEM OF WORK AS PER INDIA GYPSUM LTD., SPECIFICATION.FIRST FLOOR

PROVIDING AND FIXING IN TRUE HORIZONTAL LEVEL 600 MM X 600 MM 15 MM THICK ARM STRONG FALSE CEILING SYSTEM MANUFACTURED BY M/S ARM STRONG WORLD INDUSTRIES USING HOT DIPPED GALVANIZED STEEL SECTION EXPOSED SURFACE WITH PRE-COATED CAPPING, MAIN TEE OF SIZE 24 X 32 MM AT EVERY 1200 MM C/C MAXIMUM AND ROTARY STITCHED CROSS TEE OF SIZE 24 X 27 MM AT EVERY 600 MM C/C AND SUB-CROSS TEE OF SIZE 24 MM X 25 MM AT 1200 MM C/C AND WALL ANGLE OF SIZE 19 X 19 MM FIXED TO PERIPHERY OF THE WALL AND THE ABOVE GRID IS SUSPENDED AT EVERY 1200 MM C/C IN BOTH DIRECTIONS USING 2.0 MM THICK PRE-STRAIGHTENED GI WIRE LAYING FINE FISSURED BUTT EDGE CEILING TILES OF 15 MM THICK MINERAL FIBER BOARD MANUFACTURED BY M/S ARM STRONG WORLD INDUSTRIES LTD., HAVING RH 99% AND FOR FINISHED OF SIZE 600 X 600 MM INCLUDING COST &CONVEYANCE OF ALL MATERIALS AND LABOUR CHARGES SUCH AS CUTTING , FIXING OF STANDING OF FRAME WORK EXPOSING ROOF MAKING COMPLETE BUT EXCLUDING GST FOR FINISHED ITEM OF WORK FIRST FLOOR

PAINTING TO NEW WALLS WITH 3COATS OF PLASTIC EMULSION PAINT INCLUDING ONE COAT OF CEMENT PRIMER OF APPROVED BRAND AND SHADE AFTER THOROUGHLY BRUSHING THE SURFACE TO REMOVE ALL DIRT AND REMAINS OF LOOSE POWDERED MATERIALS, INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO WORK SITE AND ALL OPERATIONAL, INCIDENTAL, LABOUR CHARGES ETC., BUT EXCLUDING GST COMPLETE FOR FINISHED ITEM OF WORK FOR INTERNAL WALLS. (APSS NO. 911)

Auditorium Seating chair: Providing and fixing Push Back Chair Auditorium Chairs 1. SEAT ASSEMBLY : the seat is made of polyurethane foam moulded with 1.5+0.1 cm thick plywood insert measured as per QA method described in QCP-QLY-P14-18 and upholstered with fabric Approx seat size : Depth: 42cm. Width @ rear 44.0 cm. width @41.0 cm. 2 BACKREST ASSEMBLY ; the back assembly is flexing type and made of polyurethane foam moulded with MS tubular frame insert and upholstered with fabric and back cover. the insert is made of 1.9+0.02 cmx0.16+0.128cm. thick MS tubular frame with flexible nylonstarps running* Approx back size: height:75.0 cm Width @ top : 34.5cm Width @ 46.0. 3 HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR Polyurethane foam is moulded with density=45+2kg/cum. 4 [POLYURETHANE FOAM: The polyureyhane foam is moulded with density = 45+2kg/cum. 5 COVERS: The back cover and mechanism cover are vaccum formed from black ABS sheets. 6 ARMREST ASSEMBLY: The arm rest under structur is upholstered PUFoam moulded wuth MS insert. Arm tops are made of balck integral skin polyurethane with 50-70 shore ' A' Hardness & reinforced with wooden insert. Armrest width = 7.0+0.5cm and are offered as common/individual armrest between chairs. 7 UNDERSTRUCTURE ; i) ms black powder coated ( dft 40-60 micrones) understructure with integrated, auto tip-up mechanism with folds the seat when not in use. (ii) Foot print area of base plate : made of HR steel 15+0.2cmx22+0.2cmx0.5+0.05cm thick. (iii) Backrest supporting beam width ; 46.0+0.2cm. (L)x 8.0+0.03cmx0.2+0.16cm MS TUBE. (iv) Understructure fixed to ground by anchors with washer and nut. 8 FLOORING PRE-REQUISITE: The Auditorium chair is designed to get mounted/grouted on floors with flooring specification as mentioned in flooring pre-requiste Godrej doc- no STG 129368. including cost and conveyance of all materials like auditorium seats as per Godrej manifacturinbf specifications etc to site, including all incidental operational, labour charges, lift and scaffolding charges, all tools and plants and the machinery hire charges, all types of taxes on all materials lift charges , consumables required for the cutting fabrication, erction welding, transportation to site and errection works etc., complete for finished item of work and as directed by engineer incharge/deparment and finished item of work. at all heights and levels complete as per drg