Telangana State Medical Services And Infrastructure Development Corporation Tender

Autopsy table CHC, Garla;I) Autopsy Table, 1.2) Make Labycare, 1.3) SKSS961, 1.1) Clinical purpose These tables are used for post-mortem examination and for demonstration purposes 1.2) Used by clinical department / ward : Post Mortem department. 2) Technical Characteristics 2.1) Technical characteristics: 1) Elevating with stainless steel dissection board (Straight table, not L type), Dimension: 100?Lx40?W. Integrated sink should also have same length and width. 2) Elevating height 32? to 40? up and down pedestal control. All thick gauge heavy duty anticorrosion stainless (SS 304) constructions. 3) Table top and integrated sink fabricate of minimum 14 gauge stainless steel, anti corrosion pedestal of minimum 11? gauge stainless steel with satin finish. Minimum ½? removable perforated grid plate with 3/8? diameter hole on 2? centers (4 each). 4) Large double wall sink with regular removable sprinkle system, Handy spay, rinse facility, Faucets stainless steel. Hand shower, heavy duty chrome plated hand piece durable minimum 8? long flexible house hand piece with hose drop in deck. Concealed pressure control hot and cold water mixture / swing spout / tap. Hydro aspirator with reverse flow having built in vacuum breaker. Access panel 2 outlet curved molded sides of table (Stainless steel). 5) (L) 70?x30? (W) for dissection of internal organs. Extension should have independent fixed pedestal and not attached to autopsy table as pedestal is fixed. The edger should be curved, molded and raised. Electrical outlets should be water splash proof. 6) Table should be able to mout in position that allow surgeon to move around the table.7) Table should have engraved scale for cadaver measurement in centimetres and inches. 8) Rivets or bolts on table should not enable bacterial or microorganism growth or accumulation. 2.2 ) User?s interface: Table should be height adjustable. 2.3) Software and / or standard of communication (where ever required): Not required. 3) Physical characteristics 3.1) Dimensions (metric): As mentioned in technical characteristics, if the room size permits. 3.2) Weight (1bs, kg) :200 kg or less 3.3. Noise (in DBA): Less than 50dBA 3.4) Heat dissipation : Not applicable 3.5) Mobility, portability : Fixed. 4) Energy source (electrically, UPS, solar, gas, water, CO2?) 4.1) Power requirement: 230V AC/1/Phase/50Hz 4.2) Battery operated: Not required 4.3) Protection-NA 4.4) Power consumption Less than 100W 5) Accessories, spare parts, consumables 5.1) Accessories, (mandatory, standard, optional); spare parts (main ones); consumables / reagents (open , closed system) : Organ cutting table, sprinkle system with wrist control water tap, neck rest, body support sheet and head rest. 6) Environmental and departmental considerations 6.1) Atmosphere/ambience (air conditioning humidity, dust..) : Capable of working in 50-100% humid condition and in temperature range of 5-40 degree Celsius 6.2) User?s care, cleaning disinfection and sterility issue : Should be compatible with Medical grade disinfectant solutions like cidex or hydrogen peroxide solution. 7) Standard & safety 7.1) Certificates (pre-market, sanitary); performance and safety standards (specific to the device type); Local and / or international. 1) The medical devices should be USFDA/CE/BIS/CDSCO/AERB approved (US FDA/CE requirements will be applicable only when the Indian standards on medical devices laid by organization like BIS/CDSCO/AERB is not available). 2) Manufacturer should have ISO 13485 certification for quality standards. 3) Electrical safety conforms to the standards for electrical safety IEC 60601-1-General requirements (or equivalent BIS standard). 4) Comply with IS 7036 autopsy table 5)History of adverse events and actions (Recall/Filed safety correction etc.) taken by manufacturer on the product should be made available to procurer. Such Information (as and when happen) after commission of product should be continued to be provided to purchaser till manufacturing of same type product is curtailed 8) Training and installation 8.1) Pre-installation requirement: Availability of 5 Amp/15 Amp. Electrical socket. 8.2) Requirements for sign-off : Compliance with quantity checklist, quality check of the product. 8.3) Training of staff (medical, paramedical, technicians): 1) Hand on training to be provided to healthcare professional onusing table, day to day maintenance/ cleaning. 2) Hand on training for in-house (Biomedical engineers) preventive / corrective maintenance (hardware/software) 9) Warranty and maintenance 9.1) Warranty 3 years, including all spares parts and accessories, or state / UT may also include the medical device in NHM biomedical equipment managements and maintenance program. 10) Documentation 10.1) Operating manuals, set manuals, other manuals 10.Other accompanying documents: 1)Certification of quality of stainless steel. Compliance with autopsy table standards or regulation. 2) Document illustrating frequency of calibration or preventive maintenance by manufacturer. 11) Notes 11) Service support contact details (Hierarchy wise; including a toll free/ landline number): 1) Contact details of manufacturer, supplier and local service agent to be provided. 2) Any contract (AMC/CMC/add-hoe) rate available to be declared by the manufacturer. Purchaser may engage third party for maintenance of equipment and vendor needs to comply in all terms. 3) Manufacturer / supplier of medical devices should provide price quote for spare part of medical device or supply item, against requisition/purchase order from biomedical engineers/technicians. 11) Recommendations or warning; Any warning sign would be adequately displayed on autopsy table. 1.3) Warranty : With 3 years warranty from the date of installation