Roads And Buildings Department Tender

Supply and fixing TV shape mirror with plastic frame size 609.6mm z 457.2mm, plywood back 1st quality including cost and conveyance of all materials, labour charges, overheads & contractors profit for finished item of work in all floors.

Flooring with Non-skid red or white full body Ceramic floor tiles of size 400 x 400 mm and thickness between 7-8 mm 1st quality conforming to IS: 13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and design set over a base coat of CM (1:8) prop. 12mm thick including neat cement slurry of honey like consistency spread @ 3.3kgs per sqm and filling the joints with white cement mixed with pigment of matching shade to match the shade of tiles over a bed of C.C or R.C.C. slab, including cost and conveyance of all materials like cement, sand, water, ceramic tiles, white cement etc., to site (excluding cost of C.C. bed) excluding cost of seigniorage charges on all materials but including cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer-in-Charge curing etc., complete for finished for finished item of work (APSS No. 707 & 701)

Supplying and fixing approved make wash down European Water Closet of 1st Quality conforming to IS: 2556-Part-2-2004 of white glazed with 'S' trap with CI short Connector & 4" dia CP thimble pipe: 150 mm long, best Indian make plastic seat and lid for European water closets with rubber or plastic Buffers as per IS 2548-1996, PVC low level system with internal componenets & short bend: 10 Liters capacity Single Flush, 15 mm brass angle stop vavle of quarter turn sppindle type of not less than 400 grams weight with internal threaded conforming to IS 8931 and 15 mm nominal size PVC connection with brass union nut C.P. coated all of approved make, including cost and conveyance of all materials and labour charges, overheads and contractor's overheads and contractor's profit etc., complete as per standard as per standard practice for finished item of work.

Supply and fixing Indian make Flat Back Wash Hand Basin (HSW/Parrywre/Neycer) 1st Quality conforming to IS: 2556-Part-4:1972 of size 550mm x 400mm with 32mm nominal size C.P. Fitting with parallel pipe thread conforming to IS: 2963-1979 and fitted with 15mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grms Seliko/Senior/Nice or equivalent complete with standard CI brackets including wooden blocks, 1 No.15mm PVC connection with brass union nuts CP coated, 1 of 1st quality including cost and conveyance of all materials to site, labour charges, overheads & contractors profit for finished item of work with single pillar clock.

Plastering 12mm thick in two coats using screened sand with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc, to site, all operational, incidental charges on materials, cost of all labour charges for mixing mortar, finisheing, scaffolding, lift charges, curing, cutting grooves as directed by Engineer-in-Charge etc., and overheads & contractors profit complete for finished item of work (SS 901, 903 & 904). GF along staircase

Plastering 12mm thick in two coats using screened sand with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc, to site, all operational, incidental charges on materials, cost of all labour charges for mixing mortar, finisheing, scaffolding, lift charges, curing, cutting grooves as directed by Engineer-in-Charge etc., and overheads & contractors profit complete for finished item of work (SS 901, 903 & 904). FF along staircase

Supplying and laying, filling, jointing and testing SWG SP-1 pipe conforming to ISI 651 with air tight Cement joits in CM (1:5:1) prop including excavation of trenches and socket pits in any soil (except rock rquiring blasting) and refilling with watering and tamping to the required slope including cost and conveyance of all materials to site and all labour charges, overheads & contractor profit etc., complete for finished item of work (APSS NO 1301 & 1318)

Constructing 904.0mm (3'0") dia brick masonry inspection chamber as per IS-4111: Part-1:1986 with cement mortar (1:6) prop using 2nd Class Clay Bricks of 225 mm thick from apporved source having a minimum crushing strength of 5 NH/sq.mm including plastering with cement mortar 1:3 prop: 1/2" thick bothinside and outside fitted with 20" dia RCC manhole covers and frames including exvavating pits up to a depth of 904 mm (3'-0") in all shorts of soils (excluding rock) and laying cement concrete (1:4:8) 150mm thick using 40mm HBG Metal and P.C.C.1:2:4 benching and channel 100mm thick as per Standard specification and including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, cost of all materials and all incidental and operational, labour charges like mixing cement mortar, constructing masonry, lift charge, curing, overheads & contractors profit etc., complete for finished item of work as per standad specification.

Providing impervious coat to exposed RCC roof slab surfaces 20mm (ave) thick to required slopes with CM (1:3) prop. Using screened sand mixed with water proofing compound manufactured by reputed manufacturers as approved by Engineer-in-Charge at 1 Kg per one bag of cement, laid over roof slab when it is gree, finished smooth with a floating coat of net cement and thread lining at regular intervals of 45cm x 45cm where ever ncessary including cost and conveyance of all materials like cement, sand, water proofing compound, water etc., to site, excluding seigniorage charges but including.

(Rupees Seven Lakhs Forty Six Thousand and Forty Seven Only)