Roads And Buildings Department Tender

Construction of RR Masonry in CM (1:6) Cement: Sand) using hard granite stones from approved quarry including cost and conveyance of all materials like Granite stones, cement, sand, water, etc., to site including cost and conveyance of all material and all operational, incidental, and labor charges such as cutting stones to required size and shape, mixing of cement mortar, constructing masonry, curing etc., and including over heads & contractor's profit, but excluding VAT and seigniorage charges complete for finished item of work for foundation and basement (APSS No. 601 & 615) (BLD-CSTN-6-12)

Supply and placing of the M-20 nominal Mix Concrete corresponding to IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site . sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, vibrating, curing, charges etc.,complete for Bed blocks ,Door filling Steps

Supply and placing of the M-20 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site . sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, vibrating, curing, centering and suttering charges etc.,complete but excluding seignorage charges, cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content as per IS code for PLINTH, PEDESTALS and FOOTINGS. Note : 1) The cement content is adopted as 330Kg/cum for estimating purpose only.The exact quantities will be as per mix design. 2) As per mix design, if the cement content is found to be less than 330 Kgs/ Cum the defference in cost shall be deducted.

For Footings

Plinth Beam

Lintels

Columns

Roof Beam

Providing impervious coat to exposed RCC roof slab surface with CM(1:3), 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost of all materials, seigniorage charges, excluding conveyance charges of materials and including all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc,, complete for finished item of work

Terrace

Brick Masonry work in CM (1:6) prop with Flyash Cement solid blocks of size 290 x 150 x 140 mm for manufacturing of flyash solid blocks using flyash of 80 kgs, cement of 15 kgs. Gypsum of 5 kgs. and stone dust including cost and conveyance of all materials, labour charges, seiniorage charges, scaffolding and curing etc., cpomplete with a compresive strength not lessthan 50 kg/sqcm for walls for Superstructure Walls.

Reinforced Brick Masonry work in CM (1:6) prop with Flyash Cement solid blocks of size 290 x 100 x 140 mm for manufacturing of flyash solid blocks using flyash of 80 kgs, cement of 15 kgs. Gypsum of 5 kgs. and stone dust including cost and conveyance of all materials, labour charges, seiniorage charges, scaffolding and curing etc., cpomplete with a compresive strength not lessthan 50 kg/sqcm for walls for Superstructure Walls.

Supply and placing of the M-20 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including sales & other taxes on all materials,all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, vicbrating,curing etc.,complete but excluding seignorage charges, cost of steel and its fabrication charges for finished item of work (APSS No. , 402)with minimum cement content as per IS code for RCC SLABS, BEAMS Note : 1) The cement content is adopted as 330Kg/cum for estimating purpose only.The exact quantities will be as per mix design. 2) As per mix design, if the cement content is found to be less than 330 Kgs/ Cum the defference in cost shall be deducted.

100mm thick roof slab GF

Stair case waist slab ( GF to Terrace) 1st & 2nd flaight

Sun shades of 0.60 Mts wide and 75mm thick at fixed end and 50mm thick at free end - Ground Floor

Plastering with 12mm thick single coat in CM (1:6) finished smooth including cost and conveyance of all materials to site, seigniorage charges on all materials, finishing, curing, scaffolding and all operational, incidental, labour charges etc., including cutting grooves where ever necessary etc., complete for finished item of work. (As per SS 903).

External all round the building -

Inner walls of Ground Floor

Colour washing two coats with approved Colour and quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials

Outer walls of Grond floor

White washing Two coat with whiting of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials

Inner walls of Ground Floor

Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126

Supply & fixing of Door frames made of all formed sections of 1.25mm thick CRCA section, size should be 50x60mm with 32mm rebate. The corner of the frame should be welded. The frame should be painted with one coat of primer and finished painted with pure polyester paint. The frame should be provided with approved quality butt hinges of 3 Nos. complete for finished item.:Single shutter 3'-0" x 7'-0" (914.4x2133.6mm) outer frame section size of 50 x 60 mm. Supply and fixing doors as per drawings ISI marked flush door shutters ANAND/RAAVILA/KUTTY /STANDARD/SUBHDWAR/ITP) of 25 mm thick single shutter with bond wood solid block board type Core having cross bands and face veneers, hot pressed bonded with water proof phenol formaldehyde synthetic resin factory made conforming to IS 2202-1991 (Part-I) both sides commercial ply with internal lipping on all sides including cost and conveyance to site of teak wood frame, flush shutter including supply and fixing ISI marked aluminium fixtures of 3 Nos butt hinges 150mm long , 1 No. aldrop 300mm x 16 mm dia, 1 No tower bolt of 300 mm x 12 mm dia at top, 2 Nos 150 mm long handle, 1 No heavy duty door stopper and 1 No rubber bush including fixing the fixtures to door with required number of screws, bolt and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc., including Overheads & Contractors profit complete for finished item of work as per APSS 1001 & 1002 (The vertical frame of door shall be embedded in flooring for a depth of not less than 10 mm) (900mm x 2100mm) (BLD-CSTN-13-16).

Room Doors - 0.9x2.10

Supply & fixing of Door frames made of all formed sections of 1.25mm thick CRCA section, size should be 50x60mm with 32mm rebate. The corner of the frame should be welded. The frame should be painted with one coat of primer and finished painted with pure polyester paint. The frame should be provided with approved quality butt hinges of 3 Nos. complete for finished item.:Single shutter 3'-0" x 7'-0" (914.4x2133.6mm) outer frame section size of 50 x 60 mm. Supply and fixing doors as per drawings ISI marked flush door shutters ANAND/RAAVILA/KUTTY /STANDARD/SUBHDWAR/ITP) of 25 mm thick single shutter with bond wood solid block board type Core having cross bands and face veneers, hot pressed bonded with water proof phenol formaldehyde synthetic resin factory made conforming to IS 2202-1991 (Part-I) both sides commercial ply with internal lipping on all sides including cost and conveyance to site of teak wood frame, flush shutter including supply and fixing ISI marked aluminium fixtures of 3 Nos butt hinges 150mm long , 1 No. aldrop 300mm x 16 mm dia, 1 No tower bolt of 300 mm x 12 mm dia at top, 2 Nos 150 mm long handle, 1 No heavy duty door stopper and 1 No rubber bush including fixing the fixtures to door with required number of screws, bolt and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc., including Overheads & Contractors profit complete for finished item of work as per APSS 1001 & 1002 (The vertical frame of door shall be embedded in flooring for a depth of not less than 10 mm) (750mm x 2100mm) (BLD-CSTN-13-16).

toilet Doors -0.75x2.10

Supply and fixing of Steel Glazed Window with double openable on both sides centrally fixed post and MS Window Section of E Z 7 with lugs, glazing clips with other fittings and their fixtures including supplying and fixing of 10 mm square bars @ 10cm c/c as per approved design with cost and conveyance of all materials and labour charges including 4mm thick pin headed glass and approved fixtures like MS Z shaped hold fast, lugs, tower bolts, etc., complete for finishing item of work complete as directed by the department .

windows for rooms

S&F of pre-cast RCC Grills of any design of 25 mm thick manufactured with M-30 grade of oncrete using vibrocompaction process using joint less FRP moulds to achieve shuttering finish and adequately reinforced for long use and to prevent damage during handling, transportation & erection etc.,

Gronolithie Concrete Flooring 20 mm thick with (1:1:2), using 6mm to 12 mm size hard granite machine crushed metal laid over CC bed already laid or RCC roof slab, in alternate panels of size not exceeding 1.50 m x 1.50 m and finishing the top surface to required smoothness and slopes and thread lining including cost of all materials like cement, metal, sand and water etc., complete, including seigniorage charges, etc., complete for finished item of work.

Flooring with ceramic tiles (Non skid type), set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, for finished item of work, but excluding the cost of conveyance of all materials. (For Toilets)

Painting with Synthetic Enamel paints - One Coat - for New Wood Work, Old Wood Work & New Iron Work including cost and conveyance of all materials to site, sales & other taxes, incidental, operational and all labour charges etc., complete for finished item of work. (APSS No. 1201, 1207 & 1212).

Kitchen Plat form with 40mm thick Polished Kadapa/Shabad stone laid on Supported masonary walls and finishing the work etc complete

Total of - A

Internal Electrification

Supply and Laying of ISI 25mm outer dia heavy grade with IS:9537 part 3 rigid PVC pipe concealed in Roof Slabs with all required PVC / Metallic Deep Junction Boxes including binding wire work, arranging fanhooks and rechecking the continuity of pipes during slab laying and also after removing the centrering work including all labour and other incidental charges etc., complete and as directed by the Dept. Makes : Sudhakar / GM / Modi / AKG / VIP. (Mod Spec. No. 6.1.2 )

Supply and laying of ISI 25mm outer dia medium grade with IS:9537 part 3 rigidPVC pipe concealed in wall with PVC / Metallic junction boxes, accessories including masonary work for light, fan and separate plug point including chisseling brick work, engaging skilled mason for fine wall cement plastering & all labour charges etc., complete. Makes : Sudhakar / GM / Modi / AKG / VIP. (Mod-Data No. 4.1.6)

Supply and fixing of ISI mark batten holder / slanting holder of Makes: Anchor / Gold Medal Olive / Million Zoom make in lieu of ceiling rose and with out bulb for light point complete with all connections and all labour charges (For rewiring points)

Wiring with run of 2 of 22/0.3mm (1.5 Sq.mm) FRLS / HFFR PVC insulated flexible ISI marked copper cable make in existing Surface pipe including supply and fixing of 3 Plate Jumbo Ceiling rose of Anchor / Gold Medal Olive / Million Zoom make , 6A/10A ISI marked Modular type switch with cover frame and necessary modular box on wall including cost and conveyance of all material and all labour charges etc., complete for light and bell points in R.B. Copper cable makes: Finolex / RR kabel / Havells. Switch Makes: GM Four-Five / Legrand Arteor / Schneider Zen celo / MK Blenge.

Supply and fixing of ISI Marked 6A/10A 3/2 pin Modular socket with 6A/10A 1way Modular switch and cover frame on a common switch board with Module box with connections including cost and conveyance of all materials and all labour charges etc., complete in N.R.B. / R.B. Makes : GM Four-Five / Legrand Arteor / Schneider Zen celo / MK (Data No. 12.1.1 )

Supply and fixing of ISI marked 16A 3pin / 6A 3 Pin 1 way Modular combi socket, 16 Amps Modular switch on a 3 Modular box with suitable cover frame with connections including cost and conveyance of all material and all labour charges etc., complete in N.R.B. / R.B. Makes : GM Four-Five / Legrand Arteor / Schneider Zen celo / MK Blenge (Data No. 12.1.3 )

Kitchen

Supply and Run of 1 of 22/0.3mm (1.5 Sq.mm) FRLS / HFFR PVC insulated flexible ISI marked copper cable in existing pipe inlcuding connections and all labour charges etc., complete. Copper cable makes: Finolex / RR kabel / Havells. (Data No. 13.1.1 )

Supply and Run of 3 of 36/0.3mm (2.50 Sq.mm) FRLS / HFFR PVC insulated flexible ISI marked copper cable in existing pipe for run of mains inlcuding connections and all labour charges etc., complete. Copper cable makes: Finolex / RR kabel / Havells.

Supply and fixing of 8 Way SPN DB with IP 43 Protection as per IS:13032 including Supply and Fixing of 1 No 40 A DP Isolator and 6 Nos 6-32 A 10kA ISI Marked C/D curve SP MCBs with all connections and labour charges etc., complete for Flush Mounting . DB Makes : Legrand / Shneider. Isolator, MCB Makes : Legrand-DX3 / Shneider-Acti9

For House

B. Total of internal electrification

Water Supply and Sanitary arrangements

Supplying & Fixing 609.6 x 457.2 x 254 mm RCC terrazzo finished sink (or constructed at site with 50.8mm thick) brass plug and chain including CI cantilever brackets etc. complete for finished item of work in all floors.(TBSP-E.VI-16)

Kitchen sink

S & F 152.4mm (6")x101.6mm(4") gully trap 1st class with CI grating and constructing single brick masonry wall chamber of size 20" x 14" x 12” in CM (1:6) prop. Over a CC (1:5:10)prop. bed, and plastering 12mm thk. in CM (1:4) prop. both inside and outside surfaces and fitted with RCC cover 3" thick as directed by Engineer-in-charge including cost and conveyance of all materials to site, labour charges etc., complete for finished item of work.

Supplying & Fixing 76.20mm (3") CI Nahany trap 1st quality with CP grating, black painted for all floors including cost and conveyance of all materials to site, labour charges etc., complete for finished item of work.

A.Toilets& C . Toilets & kitchen

S & F tested NP bib taps at all levels of size 12.70mm dia of Indian make first quality including cost and conveyance of all materials, labour charges etc., complete for finished item of work in all floors.

250 grams (short) -in Kitchen , & A.toilets. C.Toilets

Providing 110 mm Dia ISI marked UPVC. pipes 2.5mm thick 4kg/sq.cm pressure of ISI marked including cost of necessary PVC Bends, shoes, iron / PVC clamps and all other accessories and fixing in position including cost and conveyance of all materials, sales & other taxes on materials to site, operational & incidental charges including all labour charges for fixing at site etc., complete for finished item of work. (APSS No. 1328)

110mm dia(4") dia for soil waste

110mm dia(4") dia for rain water pipes from terrace to Ground floor

75mm dia(3") dia for waste water

Supplying & fixing CPVC pipe as per ISI mark in ground or on wall including cost of tees, elbows, bends, reducers, couplings, running joints, union flanges, unions etc. with necessary excavation in all types of soils except rock requiring blasting, refilling, chasing masonry walls and making good the walls & floors to the originals, surface and fixing MS clamps on walls, including cost and conveyance of all materials and labour charges complete for finished item of work.

S&F premium make CPVC Pipes of 15.90mm OD Pipe -SDR 13.5

S&F premium make CPVC Pipes of 22.20mm OD Pipe -SDR 13.5

S&F premium make CPVC Pipes of 28.60mm OD Pipe -SDR 13.5

Chiselling the brick masonry wall and repairs as directed by the department including cost and conveyance of all material, labour chrarges, overhead charges and contractor profit but excluding VAT etc., complete.

Constructing 450 mm x 450 mm (1'6"x1'6") brick in CM 1:6 prop. Masonry. Inspection chamber up to 914.4 mm (3'0") and fitted with suitable RCC frame and cover frame and cover etc, complete.

for sewer connections

Providing and fixing 23" (584.2mm) long white glazed Indian WC Orissa pan of parry/Neycer/HSW make with P or S trap with brick masonry seat, CC squatting plate as approved by Engineer-in-charge, W.C. shall be encased on CC (1:2:4) 6” alround well above the joint to stop leakage at the joint etc., complete including cost and conveyance of all materials to site, cost of CC bed, labour charges and segniorage charges etc., complete for finished item of work.

WC for A.Toilet & C. Toilets

S & F 32mm dia PVC waste pipe including cost and conveyance of all materials and labour charges for finished item of work etc. complete

Kitchen sink