Professor Jayashankar Telangana State Agricultural University Tender

Repairs and Renovation;S/F in position MS window of approved design using 25mm x 25mm x 5mm MS angle for frame and 20mm x 20mm x 4mm MS angle for shutter and welded on top with 18 guage MS sheet including providing necessary cost of fabrication, welding and providing 3 nos x 100mm long MS butt hinges, 2nos x 250mm long MS Aldrop, 1no x 250mm long tower bolt, 2nos x 150mm long MS handles etc complete as directed by the department.

Repairs and Renovation;S/F of Heavy duty mortise lock 6/7 levers (IS:2209) with PC or CP handles complete set

Repairs and Renovation;Providing Pin headed glass 4mm thick including cost of putty chips etc., cost of conveyance of all materials, labour charges, etc., complete as directed by the department.

Repairs and Renovation;Providing door/windows repairs including necessary fixtures and labour charge etc., complete.

Repairs and Renovation;Plastering 20 mm thick in single coat in CM (1:5) including cost and conveyance of all materials like cement, sand, water etc., to site, excluding seigniorage charges, sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting Grooves as directed by Engineer - in - charge etc., complete

Repairs and Renovation;Plain Cement Concrete M-20 (1:2:4) proportion nominal mix (cement: fine aggregate: Coarse aggregate) for foundation levelling courses and below flooring beds using 40mm size (SS5) hard Granite metal upto Plinth level from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, excluding seigniorage charges, sales & other taxes on all materials and including all charges for mixing, laying concrete in foundations ramming in 15 cm layers finishing top surface to the required level curing etc., complete.

Repairs and Renovation;Removal of cupboards including stacking the materials and all labour charges etc.,complete

Repairs and Renovation;Fabrication, welding, supplying and erection in position MS angles as per design including cost of all materials, labour charges, fabrication and welding charges, erecting in position, providing red oxide primer etc., complete.

Repairs and Renovation;Brick masonry 230 mm thick for panel walls in super structure, parapet walls with cement mortar (1:8) prop (Cement:sand) using Bricks second class or ground moulded (Non-Modular or traditional size) 23 x 11 x 7 cm from approved source having minimum crushing strength of not less than 3.5 N/sq.mm. including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, cost of excluding seigniorage charges on all materials and all incidental and operational, labour charges like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing etc., complete

Repairs and Renovation;Supplying and fixing in position weld mesh grills using 20mm x 20mm x 4mm MS angle for frame alround and 20mm x 4mm MS flat for horizontal & vertical support and welded with 1" x 1" size 16 gauge weld mesh jalli, cost of all materials, fabrication, welding and fixing in position, painting with red oxide paint etc., complete as directed by the department.

Repairs and Renovation;Supplying and fixing of Unplasticised Poly Vinyl Chloride (UPVC) 3 track sliding doors with mesh shutter ? (2-glass shutters and 1- meshshutter)- 95 - Series duly manufactured using UPVC reinforced profiles (Composition ofprofile shall consists a minimum of 5.5 PHR of TiO2 and not more than 12 PHR of CaCo3 for every 100 parts of PVC resin) of (108 mm x 45 mm)/(95.50 mm x 60 mm) x 2.20 mm for outer frames, (75 mm x 39 mm)/(66 mm x 42 mm) x 2.20 mm for sliding door shutter frames capable of mounting single glazing system, structurally reinforced with hot dip galvanized up to 50 microns of minimum thickness of 1.2 mm prefabricated & welded through fusion welding the door sash shall be fitted with 6 mm thick clear float glass of reputed make duly fixed with Grey colour TPV Gasket for sash & Glazing bead shall be coextruded with Grey colour soft PVC. Meshshutter shall be made of (48 mm x 30 mm))/(50 mm x 26.5 mm) x 2.0 mm uPVC profile section and fitted with Vinyl Coated Fibre mesh and rollers/pulley duly fixed with TPV Gaskets weathering seal resistant Door shall be provided with standard hardware & multi point locking system of Patio/Roto espagulate and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/ deglazing at site etc., including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site completeforfinisheditemofwork.