Nuclear Fuel Complex Tender
For getting the details of etenders, if you are looking for information about them from the cumbersome government websites but are tired of doing so, Bidassist comes up with a one stop solution. It collates every Eproc telangana tender on Bidassist. One can approach it for the bidding process, registration process, etc., are explained below.
Nuclear Fuel Complex - NFC Tender
Eprocure
Opening Date11 Jan 2025
Closing Date12 Feb 2025
Tender Amount₹ 4,80,00,000
Technical
Technical
Financial
Class Of Bidder
... View More
Class-I and Class-II local suppliers are eligible to bid.
Technical Capacity
... View More
The required prior work experience for the bidder includes satisfactorily completing similar work during the last 7 years. The experience criteria include: (1) One completed similar work not less than 80% of the Estimated cost, i.e., Rs. 3.8 crores, (2) Two similar completed works each costing not less than 60% of the Estimated cost, i.e., Rs. 2.9 crores, (3) Three similar completed works each costing not less than 40% of the Estimated cost, i.e., Rs. 1.9 crores. The similar work is defined as "Supply, Installation, Testing & Commissioning of ventilation or HVAC system". The value of executed work will be brought to the current costing level by enhancing the actual value of work at a simple rate of 7% per annum. Additionally, the average annual financial turnover should be at least 100% of the estimated cost, i.e., Rs. 4.8 crores during the immediate last 3 consecutive financial years. The bidder should also have the amount equal to 40% of the estimated cost of the work, i.e., Rs. 1.92 Crore, as solvency.
Costs
EMD
₹ 9,60,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Summary
Revamping The Ventilation System
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_NFC_844129_1Tender No
E/671/2024Tender Authority
Nuclear Fuel Complex ViewPurchaser Address
-Website
http://eprocure.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Supply: 26000CMH ; Static Pressure 80 mmWC for area V4A/B, motor =11 KW
2
-
-
... More
Erection: 26000CMH ; Static Pressure 80 mmWC for area V4A/B, motor =11 KW
2
-
-
... More
Supply: 80000 CMH,Static Pressure 80 mmWC for area V8A/B, motor = 37 KW
2
-
-
... More
Erection: 80000 CMH,Static Pressure 80 mmWC for area V8A/B, motor = 37 KW
2
-
-
... More
Exhaust air Fans :SISW type, backward curved, belt driven.
Temperature to be considered is 50deg C.
The scope also includes class F or higher insulation motor and accessories like non metalic bellows/ flexible connections at fan outlet,common base frame, vibration isolators, V-belt, guard, electrical actuator controlled volume control damper with damper control panel . Entire construction shall be epoxy painted.
MOC:Mild Steel Motor : IE 2 & Min Class F insulation
-
-
-
... More
Supply: 30000 CMH,Static Pressure 315 mmWC for area E8C, motor = 45 KW
1
-
-
... More
Erection: 30000 CMH,Static Pressure 315 mmWC for area E8C, motor = 45 KW
1
-
-
... More
Oxide areaExhaust air Fans : SISW type, backward curved, belt driven, Side suction & top delivery. Temperature to be considered is 50deg C. The scope also includes accessories like non metalic bellows/ flexible connections at fan outlet,common base frame, vibration isolators, V-belt, guard, electrical actuator SS controlled volume control damper at the outlet,non metallic SS bellows ,SS mating flanges. 6000CMH (MOC: SS316L all components including casing, Base frame :SS 304L) static pressure: 750mm WC IE 2, Class F or higher Insulation motor,motor capacity-35 KW
-
-
-
... More
Supply for NUOFP- SES area
2
-
-
... More
Erection for NUOFP- SES area
2
-
-
... More
Oxide area Exhaust air Fans : SISW type, backward curved, belt driven, Side suction & top delivery. Temperature to be considered is 50deg C. The scope also includes accessories like non metalic bellows/ flexible connections at fan outlet,common base frame, vibration isolators, V-belt, guard, electrical actuator SS controlled volume control damper at the outlet,non metallic SS bellows , SS mating flanges. 6000CMH (MOC: SS316L all components including casing, Base frame :SS 304L) static pressure: 450mm WC IE 2, Class F or higher Insulation motor,motor capacity-15 KW
-
-
-
... More
Supply for NUOFP- spray dryer area
2
-
-
... More
Erection for NUOFP- spray dryer area
2
-
-
... More
Centrifugal pumps: Supply Installation Testing &
Commissioning of Water recirculation centrifugal pumps
suitable to handle water of different water flow rates, flexible coupling, mounting frame, etc.,
MOC: Cast Iron casing with SS304L impeller
Drive Arrangement Suitable with VFD
-
-
-
... More
Supply: flow-70CMH, 1450- RPM, Head-35M
1
-
-
... More
Erection:flow-70CMH, 1450- RPM, Head-35M
1
-
-
... More
Plumbing between Spray chamber and Pumps:
Piping from spray chamber to/from the pumps Sizes varies from φ125mm -φ150mm. Associated pump accessories : Isolation valves at inlet & outlet, flow regulation valves, NRV/check valve,strainer, etc. Piping from battery limit is also covered in this scope.Distance between pumps to spray chamber is 15M.(2No Pumps-1S+1W).
Necessary fittings : Elbows, tees, couplings, reducers fasteners, clamps.etc,
MOC : GI Class B
-
-
-
... More
Supply for areas V5A/B/C & V8A/B (NUOFP)
5
-
-
... More
Erection for areas V5A/B/C & V8A/B (NUOFP)
5
-
-
... More
Spray Chamber internals: Supply Installation Testing &Commissioning of three bank water spraying system with header(φ125mm -φ150mm), distributers(φ40mm-4M height-12Nos ), marine light, pipe fittings, quick fill make up water line along with float and valve, drain pipe with gate valve, etc.
MOC : GI Class-B
-
-
-
... More
Supply for areas V5A/B/C & V8A/B (NUOFP)
5
-
-
... More
Erection for areas V5A/B/C & V8A/B (NUOFP)
5
-
-
... More
HDPV Nozzles:PVC body,SS-304L clamp, SS-304L Dome, Orifice, Rubber O ring with PVC threaded cap.
-
-
-
... More
Supply for areas V4A/B,V5A/B/C & V8A/B (NUOFP)
800
-
-
... More
Erection for areas V4A/B,V5A/B/C & V8A/B (NUOFP)
800
-
-
... More
Fresh Air Filter
Capacity : 2000 CFM
Grade : G4
Efficiency : 90% down to 10 micron
Filter Media : HDPE
Size : 610x610 mm
Casing : Aluminium
Face guard : Wire mesh type
(Note: Necessary support structure is covered in another item)
-
-
-
... More
Supply for areas V1A/B, V2A/B/C,V 3A/B/C, V4A/B, V5A/B/C & V8A/B (NUOFP)
250
-
-
... More
Erection for areas V1A/B, V2A/B/C,V 3A/B/C, V4A/B, V5A/B/C & V8A/B (NUOFP)
250
-
-
... More
Chevron type PVC Mist eliminator: Profile width-170mm, thickness-2mm, Notch angle-Aluminium( 40x6),C-Clamp:ss304, tie rod:SS304 φ6mm. MOC:PVC
(Note: Necessary GI support structure is covered in another item).
-
-
-
... More
Supply for areas V1A/B, V2A/B/C,V 3A/B/C, V4A/B, V5A/B/C & V8A/B (NUOFP)
350
-
-
... More
Erection for areas V1A/B, V2A/B/C,V 3A/B/C, V4A/B, V5A/B/C & V8A/B (NUOFP)
350
-
-
... More
GI Supporting Structure : Hot Dip Galvanized Iron IS 2062/ASTM A36/ JIS G3101 85 micron GI coating thickness supporting structure.
-
-
-
... More
Supply
10000
-
-
... More
Erection
10000
-
-
... More
SS304L Ducting: Supply/Exhaust air duct with SS304L material complying to ASTM A 240. Accessories included: supply/exhaust air collars, vanes, splitters, necessary ss structural members (viz. SS angle flanges for duct joining, lateral& longitudinal reinforcement, fasteners, SS Nuts & Bolts), gaskets, sealent, etc. Duct construction shall be as per IS-655/SMACNA standrad.
(Note: Necessary duct supporting structural material is covered under separate item )
-
-
-
... More
Supply: 22G
1500
-
-
... More
Erection: 22G
1500
-
-
... More
Supply: 18G
750
-
-
... More
Erection: 18G
750
-
-
... More
Belimo electrical actuator controlled SS304L volume control damper :SS304L materialcomplying to ASTM A 240 with SS flange ( size :cross sectional area varies from 0.25 sqmeter to 1.5 sqmeter ). Dampers shall have sealed ball bearings on the shaft of the louvers/ plates to enable smooth operation and along with provision of manual/mechanical override.
-
-
-
... More
Supply
40
-
-
... More
Erection
40
-
-
... More
Damper control panel , it includes wiring between damper actuator and the panel
-
-
-
... More
Supply
12
-
-
... More
Erection
12
-
-
... More
SS304L Volume Control Dampers:SS304L material
complying to ASTM A 240 with SS flange.Dampers shall have sealed ball bearings on the shaft of the louvers/ plates to enable smooth operation along with provision of manual/mechanical override.
-
-
-
... More
Supply
2
-
-
... More
Erection
2
-
-
... More
Non Return damper MOC: SS 304L
Thickness: 16 G Thick
Dimensions: As per Requirement
Measurement: Cross Sectional Flow Area including flanges.Dampers shall have sealed ball bearings on the shaft of the louvers/ plates to enable smooth operation along with provision of manual/mechanical override..
-
-
-
... More
Supply
20
-
-
... More
Erection
20
-
-
... More
Canvas cloth: Suitable canvas cloth for supply and Exhaust blower
-
-
-
... More
Supply
20
-
-
... More
Erection
20
-
-
... More
Return Air Grills
MOC: Extruded Aluminium Powder Coated
Frame Thickness : 16 G
-
-
-
... More
Supply
14
-
-
... More
Erection
14
-
-
... More
Jet diffusers: 315mm dia, long throw,anodized finish jet MOC: Aluminium Note: Color of the jet diffuer as per site condition
-
-
-
... More
Supply
30
-
-
... More
Erection
30
-
-
... More
Polypropylene/FRP Ducting/FRP dampers: Polypropylene/FRP Ducting:Design, Fabrication, Supply, Installation, Testing and Commisssioning of 3mm PP reinforced with 3mm FRP ducting/dampers. Flanges shall be 3mm PP laminated with 10mm FRP. All the nuts, bolts & washers ued should be SS304 only. Dampers shall have sealed ball bearings on the shaft of the louvers/ plates to enable smooth operation.The gasket between the flanges should be single pieces of 3mm flexible PVC.
-
-
-
... More
Supply
400
-
-
... More
Erection
400
-
-
... More
Polypropylene/FRP Plenum Polypropylene/FRP Ducting:Design, Fabrication, Supply, Installation, Testing and Commisssioning of 5mm PP reinforced with 6mm FRP Plenum. Flanges shall be 5mm PP laminated with 10mm FRP. All the nuts, bolts & washers ued should be SS304 only. The gasket between the flanges should be single pieces of 3mm flexible PVC.
-
-
-
... More
Supply
300
-
-
... More
Erection
300
-
-
... More
GI Leak tight doors:
Size : 0.6 x2.0 m
-
-
-
... More
Supply
15
-
-
... More
Erection
15
-
-
... More
MCC Panels: 415 V , 3 Phase, 50 Hz MCC Panel for V3B blower
4 P, 200 Amp MCCB I/C - 1 No
O/G :75 KW VFD - 1 nos 3P+NL 63 A MCCB -1 Nos
-
-
-
... More
Supply
1
-
-
... More
Erection
1
-
-
... More
MCC Panels: 415 V , 3 Phase, 50 Hz MCC Panel for V 8A/B & E 8C& D
4 P, 250 Amp MCCB I/C - 1 No
O/G :37 KW VFD - 2 nos ,45 KW VFD - 2 nos
3P+NL 63 A MCCB -1 Nos
-
-
-
... More
Supply
1
-
-
... More
Erection
1
-
-
... More
Local push buttons for blowers and pumps
-
-
-
... More
Supply
9
-
-
... More
Erection
9
-
-
... More
GI cable trays
-
-
-
... More
Supply: 150mmx75mmx1.6mm
50
-
-
... More
Erection: 150mmx75mmx1.6mm
50
-
-
... More
Supply: 300mmx75mmx1.6mm
50
-
-
... More
Erection: 300mmx75mmx1.6mm
50
-
-
... More
Earthing Srtip: GI Strip (Sizes 6mmx50mm and 6mmx25mm)
-
-
-
... More
Supply
100
-
-
... More
Erection
100
-
-
... More
SITC of 1100 V grade Copper cable, Xlpe Insulated Armoured FRLS
-
-
-
... More
Supply: 35 Sqmm, 3 core
100
-
-
... More
Erection: 35 Sqmm, 3 core
100
-
-
... More
Supply: 1.5 Sqmm, 3 core
100
-
-
... More
Erection: 1.5 Sqmm, 3 core
100
-
-
... More
Supply: 6 Sqmm, 3 core
50
-
-
... More
Erection: 6 Sqmm, 3 core
50
-
-
... More
Supply: 16 Sqmm, 3 core
100
-
-
... More
Erection: 16 Sqmm, 3 core
100
-
-
... More
Supply: 2.5 Sqmm, 7 core
300
-
-
... More
Erection: 2.5 Sqmm, 7 core
300
-
-
... More
Termination of XLPE insulated armoured Copper power cables (up to 1100 V grade) and connection of leads including the supply of single compression cable glands and heavy duty copper lugs, drilling of suitable holes in equipments for fixing purposes, including fixing of cable glands, supply and fixing of PVC shrouds, cutting and stripping of cable insulation, crimping the lug on to the conductor, clamping of the cable-cores, marking with wire number, ferrules etc., including all labour and materials, as per approved drawings.
-
-
-
... More
Supply: 35 Sqmm, 3 core
2
-
-
... More
Erection: 35 Sqmm, 3 core
2
-
-
... More
Supply: 1.5 Sqmm, 3 core
4
-
-
... More
Erection: 1.5 Sqmm, 3 core
4
-
-
... More
Supply: 6 Sqmm, 3 core
4
-
-
... More
Erection: 6 Sqmm, 3 core
4
-
-
... More
Supply: 16 Sqmm, 3 core
4
-
-
... More
Erection: 16 Sqmm, 3 core
4
-
-
... More
Supply: 2.5 Sqmm, 7 core
9
-
-
... More
Erection: 2.5 Sqmm, 7 core
9
-
-
... More
Dismantling
-
-
-
... More
Dismanlting of existing Air washer system along with its accessories
3
-
-
... More
Dismantling of existing blower
7
-
-
... More
Dismantling of existing GI ducting and safe desposal and necessary traportation to the store
500
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%