Municipality Tender

gym;Supply Delivery and installation of Elliptical Machine with carriying of 1 persons of overall sizes 1050*650*1400mm made of Hot Dipped Galvanaizes pipes conforming to IS 1239 (Part -1) with GI thickness 60 micron materials and heavy Duty C class series of pipes only. Equipment should be made up of 100NB Main post pipe with supporting structure 4OmmNB. 60*40mm Handle bars made up of high quality Grip Rubber fixed with deep grooves self aliging ball bearings and thrust bearings using hardware of Grade 4.60 Galvanized. The paintaing to the equipment should be powder coated ( 80-100 microns thickness all open end pipes should be covered with SS/LLDPE Caps & the equipment is grouted with M18 foundation bolts and concrete strength of M25 for safety and stability and as directed by the Engineer- in- charge (The Total unit cost is = Rs.46697.00 (Item Price) + Rs. 953.00 for inland transporation, insurance and other services required to convey the goods to the final destination but excluding GST for complete item of the work

gym;Supply Delivery and installation of Rowing Machine/Rower Technical specification double equipment 1) Dimensions (L*W*H) :1250*800*1150 mm 2. Fabricated with main post of NB 100mm G.I C Class pipe of approved make 3. Main frame of NB 65mm C Class pipe 4. Handle support frame of NB 25mm C Class pipe stands for Nominal bore size i.e., Internal diameter of pipe in millimeters 5. All pipes are powdered coated with 80-120mm micron thick AkzoNobel or equivalent pipes 6.All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs.7.Zinc primer paint is applied at all the welding points prior to finishings 8. Base plate cover made of virgin LLDPE manufactured by rotational molding with 4.00mm thickness coloured UV resistent 9. Foothhold made by NB 50mm GI C Class pipe 10. seat to be made up from virgin LLDPE manufactured by rotational moulding with 4.00 mm thickness colored UV resistent and environmental friendly 11. Maintanence free bearings of SKF or equivelent make duly oil sealed and self lubiricated are use in the equipment manufactured 12.The equipment are fitting with inbuilt limiters to prevent unwanted movements 13.The equipment is fixed on ground with concrete of minimum strength M25 and J shaped welded bolts of 18mm thickness 14. once the concrete is set the equipment is fixed on to it and nuts and bolts are covered with base plate cover 15. High Tensile steel with galavnaized nut bolts are used for assembly 16.Equipment made to EN 16630 & DIN 79000 International standars for outdoor fitness equipment 17. self explannatory stainless steel label fixed on equipment for ease of use (The Total unit cost is = Rs.41639.00 (Item Price) + Rs. 851.00 for inland transporation, insurance and other services required to convey the goods to the final destination but excluding GST for complete item of the work

gym;Supply Delivery and installation of 3-persons waist trainer (Standing Twister) with carriying of 3 persons of overall sizes 1450*1450*1350mm with standing base of 300mm dia made of Hot Dipped Galvanaizes pipes conforming to IS 1239 (Part -1) with GI thickness 60 micron materials and heavy Duty C class series of pipes only. Equipment should be made up of 100NB Main post pipe with supporting structure 25mmNB and 4OmmNB. Fixed wheel of 550 mm dia having standing positions equally spaced at 120 degrees each fixed with Deep grooves self aligning ball bearings & thurst bearings using hardware of Grade 4.60 Galvanized. The paintaing to the equipment should be powder coated ( 80-100 microns thickness all open end pipes should be covered with SS/LLDPE Caps & the equipment is grouted with M18 foundation bolts and concrete strength of M25 for safety and stability and as directed by the Engineer- in- charge (The Total unit cost is = Rs.55615.00 (Item Price) + Rs. 1135.00 for inland transporation, insurance and other services required to convey the goods to the final destination but excluding GST for complete item of the work

gym;Supply Delivery and installation of Leg Press with carriying capacity of 2 persons of overall sizes 2000*380*1650mm with seat size of 300mm*300mm dia made of Hot Dipped Galvanaizes pipes conforming to IS 1239 (Part -1) with GI thickness 60 micron materials and heavy Duty C class series of pipes only. Equipment should be made up of 100NB Main post pipe with supporting structure 25mmNB and 4OmmNB. fixed with Deep grooves self aligning ball bearings & thurst bearings using hardware of Grade 4.60 Galvanized. The paintaing to the equipment should be powder coated ( 80-100 microns thickness all open end pipes should be covered with SS/LLDPE Caps & the equipment is grouted with M18 foundation bolts and concrete strength of M25 for safety and stability and as directed by the Engineer- in- charge (The Total unit cost is = Rs.59976.00 (Item Price) + Rs. 1224.00 for inland transporation, insurance and other services required to convey the goods to the final destination but excluding GST for complete item of the work

gym;Supply Delivery and installation of 3- persons Waist Trainer (sitting twister) with carriying capacity of 3 persons of overall sizes 1500*1500*1350mm with standing base of 350mm dia made of Hot Dipped Galvanaizes pipes conforming to IS 1239 (Part -1) with GI thickness 60 micron materials and heavy Duty C class series of pipes only. Equipment should be made up of 100NB Main post pipe with supporting structure 25mmNB and 4OmmNB. fixed with Deep grooves self aligning ball bearings & thurst bearings using hardware of Grade 4.60 Galvanized. The paintaing to the equipment should be powder coated ( 80-100 microns thickness all open end pipes should be covered with SS/LLDPE Caps & the equipment is grouted with M18 foundation bolts and concrete strength of M25 for safety and stability and as directed by the Engineer- in- charge (The Total unit cost is = Rs.60564.00 (Item Price) + Rs. 1236.00 for inland transporation, insurance and other services required to convey the goods to the final destination but excluding GST for complete item of the work

gym;Supply Delivery and installation of Double cross walker/Arm strenthener with carriying capacity of 2 persons of overall sizes 1100*915*1430mm with standing base of 350mm dia made of Hot Dipped Galvanaizes pipes conforming to IS 1239 (Part -1) with GI thickness 60 micron materials and heavy Duty C class series of pipes only. Equipment should be made up of 100NB Main post pipe with supporting structure 80mmNB and 60*40 mmNB Rectangular Tube fixed with Deep grooves self aligning ball bearings & thurst bearings using hardware of Grade 4.60 Galvanized. The paintaing to the equipment should be powder coated ( 80-100 microns thickness all open end pipes should be covered with SS/LLDPE Caps & the equipment is grouted with M18 foundation bolts and concrete strength of M25 for safety and stability and as directed by the Engineer- in- charge (The Total unit cost is = Rs.71393.00 (Item Price) + Rs. 1457.00 for inland transporation, insurance and other services required to convey the goods to the final destination but excluding GST for complete item of the work

gym;Supply Delivery and installation of Taichi Spinner (4) wheel with using capacity of 2 persons of overall sizes 1050*1000*1350mm with made of Hot Dipped Galvanaizes pipes conforming to IS 1239 (Part -1) with GI thickness 60 micron materials and heavy Duty C class series of pipes only. Equipment should be made up of 100NB Main post pipe with supporting structure 50mmNB Handle bars made up of high quality grip rubber fixed with Deep grooves self aligning ball bearings & thurst bearings using hardware of Grade 4.60 Galvanized. The paintaing to the equipment should be powder coated ( 80-100 microns thickness all open end pipes should be covered with SS/LLDPE Caps & the equipment is grouted with M18 foundation bolts and concrete strength of M25 for safety and stability and as directed by the Engineer- in- charge (The Total unit cost is = Rs.43855.00 (Item Price) + Rs. 895.00 for inland transporation, insurance and other services required to convey the goods to the final destination but excluding GST for complete item of the work

gym;Supply Delivery and installation of Shoulder press with carrying capacity of 2 persons of overall sizes 1800*700*1900mm with seat size of 300*300 mm dia made of Hot Dipped Galvanaizes pipes conforming to IS 1239 (Part -1) with GI thickness 60 micron materials and heavy Duty C class series of pipes only. Equipment should be made up of 100NB Main post pipe with supporting structure 25mmNB and 32mm NB , 60*40 mm NB Rectangular Tube fixed with Deep grooves self aligning ball bearings & thurst bearings using hardware of Grade 4.60 Galvanized. The paintaing to the equipment should be powder coated ( 80-100 microns thickness all open end pipes should be covered with SS/LLDPE Caps & the equipment is grouted with M18 foundation bolts and concrete strength of M25 for safety and stability and as directed by the Engineer- in- charge (The Total unit cost is = Rs.67081.00 (Item Price) + Rs. 1369.00 for inland transporation, insurance and other services required to convey the goods to the final destination but excluding GST for complete item of the work

gym;Supply Delivery and installation of Chest press with carrying capacity of 2 persons of overall sizes 1800*700*1900mm with seat size of 300*300 mm dia made of Hot Dipped Galvanaizes pipes conforming to IS 1239 (Part -1) with GI thickness 60 micron materials and heavy Duty C class series of pipes only. Equipment should be made up of 100NB Main post pipe with supporting structure 25mmNB and 32mm NB , 60*40 mm NB Rectangular Tube fixed with Deep grooves self aligning ball bearings & thurst bearings using hardware of Grade 4.60 Galvanized. The paintaing to the equipment should be powder coated ( 80-100 microns thickness all open end pipes should be covered with SS/LLDPE Caps & the equipment is grouted with M18 foundation bolts and concrete strength of M25 for safety and stability and as directed by the Engineer- in- charge (The Total unit cost is = Rs.67081.00 (Item Price) + Rs. 1369.00 for inland transporation, insurance and other services required to convey the goods to the final destination but excluding GST for complete item of the work

gym;Supply Delivery and installation of Leg Curl : Technical specification double equipment 1) Dimensions (L*W*H) :1500*450*650 mm 2. Fabricated with main post of NB 100mm G.I C Class pipe of approved make 3. Main frame of NB 100mm C Class pipe 4. Handle support frame of NB 32mm C Class pipe stands for Nominal bore size i.e., Internal diameter of pipe in millimeters 5. All pipes are powdered coated with 80-120mm micron thick AkzoNobel or equivalent pipes 6.All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs.7.Zinc primer paint is applied at all the welding points prior to finishings 8. Base plate cover made of virgin LLDPE manufactured by rotational molding with 4.00mm thickness coloured UV resistent 9. Foothhold made by NB 50mm GI C Class pipe 10. seat to be made up from virgin LLDPE manufactured by rotational moulding with 4.00 mm thickness colored UV resistent and environmental friendly 11. Maintanence free bearings of SKF or equivelent make duly oil sealed and self lubiricated are use in the equipment manufactured 12.The equipment are fitting with inbuilt limiters to prevent unwanted movements 13.The equipment is fixed on ground with concrete of minimum strength M25 and J shaped welded bolts of 18mm thickness 14. once the concrete is set the equipment is fixed on to it and nuts and bolts are covered with base plate cover 15. High Tensile steel with galavnaized nut bolts are used for assembly 16.Equipment made to EN 16630 & DIN 79000 International standars for outdoor fitness equipment 17. self explannatory stainless steel label fixed on equipment for ease of use (The Total unit cost is = Rs.40719.00 (Item Price) + Rs. 831.00 for inland transporation, insurance and other services required to convey the goods to the final destination but excluding GST for complete item of the work

gym;Providing Earth work excavation for foundation Columns of Plain Cement Concrete Foundation Columns

gym;Providing of SBR Rubber tile flooring for an area of 100 Sq.m including earth work excavation levelling of surface and compaction laying of plain concrete 1:5:10 grade FOR bed including cost of centering and shuttering vibration with plate vibrators all work up to plinth level of 100mm thick layer and cement concrete flooring 1:2:4 finished with floating coat of neat cement slurry including the cost of nosing of steps etc., of 75mm thick layer and curing to slabs for a period of 21 days for complete item of the work as directed by the Engineer-in- charge

gym;Providing, Fabicating and fixing one instructional sigh information sigh board as specified in Cement Concrete block foundation at each location including cost of materials and labours, taxesfor complete item of the work as directed by the Engineer-in- charge

gym;Providing Annual Maintenance and repair of the supplied goods for a period provided that this service shall not relieve the supplier of any waranty obligations under this contract

gym;Providing of deatiled operations and Maintanance manual for each appropriate unit of supplied goods