Mission Bhagiratha Department Tender

RCC M- 20 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc., including centering, shuttering ,Overheads and Contractors profit and but excluding cost of steel and its fabrication charges,Seigniorage charges and taxes for finished item of work,for Footings

RCC M- 20 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc., including centering, shuttering ,Overheads and Contractors profit and but excluding cost of steel and its fabrication charges,Seigniorage charges and taxes for finished item of work,, Plinth Beams

RCC M- 20 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,including centering, shuttering ,Overheads and Contractors profit and but excluding cost of steel and its fabrication charges, Seigniorage charges and taxes for finished item of work, for Columns

Providing High Yield Strength Deformed (HYSD) steel bars (Fe 500 grade as per IS 1786-1985) of 8mm to 40mm diameters, cutting, bending, to required sizes and shapes placing in position with cover blocks of approved size and binding wire of 20SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of bars from approved sources to site of work, including cost and conveyance of binding wire, cover blocks, chairs, overlaps, spacers, dowels, wastage etc., and all operational, incidental, and labour charges such as cutting, bending, placing in position, tying etc., and sales & other taxes,on cost of all materials complete for finished item of work (APSS No.126) including Overheads and Contractors profit and taxes for finished item of work.

Random Rubble stone masonry, in CM (1:8) prop: (Cement: Sand) using Hard blasted Granite stones from approved quarry including cost and conveyance of all materials like Granite stones, cement, sand, water, etc., to site sales & other taxes on all materials, all operational, incidental, and labour charges such as cutting stones to required size and shape, mixing of cement mortar, constructing masonry, curing etc., complete for foundation and basement including Overheads and Contractors profit and but excluding Seigniorage charges and GST for finished item of work (APSS No. 601 & 615)

Construction of compound wall with brick masonary in (1:6) using 2nd class bricks size 23 x 11 x 7 cmsincluding cost and conveyance of all materials,labour charges and seign. charges etc. complete including Overheads and Contractors profit and excluding Seigniorage charges and GST.

Plastering 12mm thick in single coats with base coat in CM (1:5) including cost and conveyance of all materials like cement, sand, water etc., to site, sales & other taxes on all materials,all operational, incidental and labour charges such as mixing mortar, scaffolding charges, lift charges, including cutting of Grooves wherever necessary as directed by Engineer - in - charge, finishing, curing, etc., complete for Even Surfaces of Wall for finished item of work (APSS 901,903 & 904) including Overheads and Contractors profit and excluding Seigniorage charges & GST

Snowcem paint two coats including cost and conveyance of all materials, cost of brushes, water to site, etc., sales & other taxes, all operational, incidental and labour charges such as scaffolding charges, lift charges, curing etc., complete for including Overheads and Contractors profit and excluding GST.

Supply and fixing of 50x50x6 mm Angles in position including cost of material, transportation charges, labour charges including Overheads and Contractors profit but excluding GST.

Supplying and fixing galvanised steel barbed wire (IS : 278-1962 Type I) weighing 9.38 Kg per 100 metres (min.), Straining and fixing to any type of standard, rails, straining bolts, including securing with and provision of galvanised mild steel wire, stapples or steel pins, etc., as directed (Posts and struts of wood, concrete, steel, etc.) including Overheads and Contractors profit but excluding GST.

Construction of Granular Sub Base / Shoulders by providing well graded Grading III material (Table 400.1) of HBG chips 9.5-11.2, 5-7, 2.3-5mm (9.5mm to 4.75mm size) at 66% and Dust of size at 34% having soaked CBR not less than 20 and Plasticity Index 6 and stacking at site to the departmental gauge for pre measurements and mixing them and spreading the same with grader in uniform layers of loose thickness of not ore than 225mm including mixing by mix in place method with rotavator to OMC and compacting with vibratory roller 80-100 kN capacity to achieve the desired density, complete as per IRC technical specification clause 401 A (iii) of MORD including Overheads and Contractors profit but excluding Seigniorage charges & GST 150mm Sub base course

Providing, laying, spreading and compacting graded stone aggregate to Wet Mix Macadam specification including premixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kN / Vibratory Roller 80-100 kN weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per Tables 400.11 & 400.12 and Technical Specification Clause 406 MORD / MORTH using M/c 45-22.4 mm HBG of 30%, 22.40-2.36mm HBG metal of 40% and Crushed sand 2.36-75 micron of 30% including Overheads and Contractors profit but excluding Seigniorage charges & GST . 150mm WMM layer

Construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per clause 1501.22 M25(Grade), coarse and fine agregates conforming to IS:383 maximum size of coarse agregate not exceeding 25mm, mixed in a concrete mixer of not less than 0.2cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side form work (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the form work as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approachs to bridge/culvert and construction joint, admixtures as approved, curing of concrete slabs for 14 days, curing compound (where specified) and water finishing to lines and grade as per drawing and technical specification clause 1501.22 including Overheads and Contractors profit but excluding Seigniorage charges & GST . 200mm CC Pavement

Filling with Gravel in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick, consolidating each deposited layer by watering and ramming including cost and conveyence of water to the work site and all operational, incidental, labour charges, hire charges of T & P etc., complete including seignorage charges, for finished item of work (APSS NO. 309 & 310) including Overheads and Contractors profit but excluding Seigniorage charges & GST

Supply and placing of the Design Mix Concrete M25 corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc., including centering, shuttering ,Overheads and Contractors profit and but excluding cost of steel and its fabrication charges, Seigniorage charges and GST for finished item of work for Footings.

Supply and placing of the Design Mix Concrete M25 corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. including Overheads and Contractors profit and but excluding cost of steel and its fabrication charges, Seigniorage charges and GST for finished item of work for Lintel beams

Supply and placing of the Design Mix Concrete M25 corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. including Overheads and Contractors profit and but excluding cost of steel and its fabrication charges, Seigniorage charges and GST for finished item of work for Columns

Supply and placing of the Design Mix Concrete M25 corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. including Overheads and Contractors profit and but excluding cost of steel and its fabrication charges, Seigniorage charges and GST for finished item of work for Plinth beams

Supply and placing of the Design Mix Concrete M25 corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. including Overheads and Contractors profit and but excluding cost of steel and its fabrication charges, Seigniorage charges and GST for finished item of work for beams

Supply and placing of the Design Mix Concrete M25 corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. including Overheads and Contractors profit and but excluding cost of steel and its fabrication charges, Seigniorage charges and GST for finished item of work for Sunshade

Supply and placing of the Design Mix Concrete M25 corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. including Overheads and Contractors profit and but excluding cost of steel and its fabrication charges, Seigniorage charges and GST for finished item of work for 150mm roofslab

Supply and Fixing of Door with Single leaf shutter, Door Size (D1) 1.20x2.10 mtrs with Medium Teak Wood Frame of sections size 65mm x 100mm withFlush door shutters, solid bond wood block board type with commercial ply on both faces.: 30 mm thick conforming to IS:2202 including cost of fixtures such as Aluminium Tower Bolt-10 mm Bolt 250 mm Long 2 No., Aluminium Handles 125mm long 2 No., Aluminium Aldrop 250 mm long 1No, Aluminium Butt hinges150 mm Long 6Nos, Aluminium Flat Latch 250 mm long 1No, Door stoppers 2 Nos, MS Hold fasts 6Nos and other Hardware Sales and Other Taxes cost and convenyance of all materials to site all Labour charges such as Fixing of Door Frame on shutter Fixing in position, with Hardware fixtures etc., complete for finsihed item of work including contractor's profit but excluding GST for Door 1.0 x 2.10 m

Supplying and fixing of Unplasticised Poly Vinyl Chloride (UPVC) sliding windows three track - two glass shutters sliding and one mesh shutter duly manufactured using UPVC reinforced profiles of (94 mm x 45 mm)/(80 mm x 52 mm) / (88 mm x 52 mm) x 2.0 mm for outer frames, (58 mm x 39 mm)/(54 mm x 38 mm) / (88 mm x 42 mm)x 2.0 mm for sliding shutter frames capable of mounting single glazing system structurally reinforced with hot dip galvanized up to 50 microns of minimum thickness of 1.2 mm prefabricated & welded through fusion welding the window sash shall be fitted with 5 mm thick clear float glass of reputed make and mesh shutter frame shall be (42 mm x 25 mm)/58 mm x 28 mm)/ (52 mm x 21.5 mm) x 2 mm fitted with nylon/ polymer mesh on rollers/ pulley duly fixed with TPV Gaskets/ EPDM weathering seal resistant accessories like locking system 1 No., per set of sashes and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/deglazing at site etc., including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site with templates for casement sizing complete for finished item of work including contractor's profit but excluding GST : Windows 1.2x1.5

Flooring with Double charged / multi charged stain free full body porcelain vitrified tiles with double layer pigment of size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades anddesigns, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc.,complete, etc., complete for finished item of work, including the cost of conveyance of all materials.. including contrcator's profit but excluding Seigniorage & GST for complete finished item of work.

Plastering 12mm thick in two coats with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) dubara sponge finish including cost and conveyance of all materials like cement, sand, water etc., to site, sales & other taxes on all materials,all operational, incidental and labour charges such as mixing mortar, scaffolding charges, lift charges, including cutting of Grooves wherever necessary as directed by Engineer - in - charge, finishing, curing, etc., including Overheads and Contractors profit and excluding Seigniorage charges & GST for complete finished item of work. for Even Surfaces of Wall for finished item of work. (APSS 901,903 & 904) For Internal Walls

Plastering 20mm thick in two coats with base coat of 16mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) dubara sponge finish including cost and conveyance of all materials like cement, sand, water etc., to site, sales & other taxes on all materials,all operational, incidental and labour charges such as mixing mortar, scaffolding charges, lift charges, including cutting of Grooves wherever necessary as directed by Engineer - in - charge, finishing, curing, etc., - including Overheads and Contractors profit and excluding Seigniorage charges & GST for complete finished item of work. for Even Surfaces of Wall for finished item of work. (APSS 901,903 & 904)For External Walls

Painting to new walls with 2 coats of Acrylic based Oil bound Washable Distemper having VOC content less than 50 grams/litre over promer coat using white cemnt as approved by Engineer-In-Charge, making 3 coats in all to give an even shade after thourughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., including Overheads and Contractors profit and excluding GST complete for finished item of work as per APSS 911 for internal walls in all floors

Providing impervious coat to exposed RCC roof slab surfaces to required slopes with CM (1:3) prop. using screened sand 20mm thick (average) mixed with integral cement water proofing liquid confirming to IS: 2645-2003 manufactured by reputed manufacturers as approved by Engineer-in-charge at 1 Kg per one bag of cement, laid over roof slab when it is green, finished smooth with a floating coat of neat cement and thread lining at regular intervals of 45cmx45cm including cost and conveyance of all materials like cement, sand, water proofing compound, water etc., to site, including sales & other taxes on all materials and operational, incidental, and labour charges for mixing mortar, laying, lift charges, rendering smooth and thread lining, curing including rounding off junctions of wall and slab etc., including Overheads and Contractors profit and excluding Seigniorage charges & GST for complete finished item of work. .(APSS No. 901 & 903).

Supply of Structural Steel, I.e., Angles, Channels and I sections including cost and conveyance of material to the site, Labour charges for fabricating all structural steel works likesteel works like Trusses, Stanchionsincluding cost of welding rods, power charges, etc including Labour charges for erecting & fixing all structural steel works like heavy iron grills, Trusses, Stanchions erecting in position and fixing by using chain pulley blocks, Derek pole arrangements and cranes etc., complete in position for finished item of work including contractor's profit but excluding GST.