Mission Bhagiratha Department Tender

Water Supply;Sluice Valve 80mm on 63mm HDPE dia pipeline- 'Supply and delivery laying of valve on pipe line true to alignment jointing with flanges of PN 1.6 rated DI D/F Gate Valves (Soft Seated) Resilient seated soft seating gate valves (Sluice valves) of PN 16 grade with body bonnet of ductile cast iron of grade GGG40/SG-400/15 or GGG-50/SG-500/7 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4, valves should be with Electrostatic powder coating both inside and outside pocket less body passage, drilled as per IS:1538.to suit the pressure class of pipe including supply delivery laying and joinitng of S/F tapered tailpeices of 5 and 15 degrees on either ends to suit the main pipeline and Valve including cost of joint materials such as rubber gaskets Bolts and Nuts and labour charges with construction of RCC valve chambers as per requirement with RCC slab and RCC manhole cover with locking arrangements etc.complete for finished item of work the rate is including all taxes.The work shall be executed based on the approved designs of the department

Water Supply;Air valve 50mm on 75mm HDPE dia pipeline- Supply and delivery of Single Chamber DI Air Valve of PN 1.6 rated with Body and cover in Ductile Iron of grade GGG40/SG-400/15 or GGG-50/SG-500/7 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions. All internal parts such as float, shell etc., all cover bolts, of stainless steel, and Gaskets and seals of EPDM food grade quality Epoxy powder coating (EP-P) inside and outside colour blue, drilled as per IS:1538.with Supply and delivery laying true to alignment jointing with flanges of PN 1.6 rated DI D/F Isolation - Gate Valves (Soft Seated) Resilient seated soft seating gate valves (Sluice valves) of PN 1.6 grade with body bonnet of ductile cast iron of grade GGG40/SG-400/15 or GGG-50/SG-500/7 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4, valves should be with Electrostatic powder coating both inside and outside pocket less body passage, drilled as per IS:1538, including supply of DI/MS Tee to suit the main pipe and Air Valve including laying, jointing of DI/MS Tee and Isolation Sluice valves along with Air Valve including cost of Jointing Materials such as Rubber Gaskets, Bolts & Nuts etc., including RCC (1:1.5:3) Footing + Stem Column including Earth work excavation and depositing on bank with an initial lead of 50m and lift of 3.0m in all types of soils except hard rock requiring blasting for founadtion , PCC(1:4:8)mix using 40mm gauge hard granite metal including cost and conveyance of all materials and labour charges etc complete, RCC with M20 grade using 20mm gauge HBG crusher metal including cost and conveyance of all materials and labour charges, centring, mixing, curing charges but excluding cost and fabrication charges of steel for reinforcement for raftCost and fabrication charges of Steel for reinforcement including cutting, bending, cranking, tying with binding wire etc complete. including fabrication charges, welding including cost of material transportation labour charges including 2 coats of best quality blue colour enamail paint including fixing charges all incidental and operational charges etc complete for finished item of work,,and contractor profit.The work shall be executed based on the approved designs and drawings of the department.

Water Supply;Air Valve 50mm on 63mm HDPE dia pipeline- Supply and delivery of Single Chamber DI Air Valve of PN 1.6 rated with Body and cover in Ductile Iron of grade GGG40/SG-400/15 or GGG-50/SG-500/7 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions. All internal parts such as float, shell etc., all cover bolts, of stainless steel, and Gaskets and seals of EPDM food grade quality Epoxy powder coating (EP-P) inside and outside colour blue, drilled as per IS:1538.with Supply and delivery laying true to alignment jointing with flanges of PN 1.6 rated DI D/F Isolation - Gate Valves (Soft Seated) Resilient seated soft seating gate valves (Sluice valves) of PN 1.6 grade with body bonnet of ductile cast iron of grade GGG40/SG-400/15 or GGG-50/SG-500/7 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4, valves should be with Electrostatic powder coating both inside and outside pocket less body passage, drilled as per IS:1538, including supply of DI/MS Tee to suit the main pipe and Air Valve including laying, jointing of DI/MS Tee and Isolation Sluice valves along with Air Valve including cost of Jointing Materials such as Rubber Gaskets, Bolts & Nuts etc., including RCC (1:1.5:3) Footing + Stem Column including Earth work excavation and depositing on bank with an initial lead of 50m and lift of 3.0m in all types of soils except hard rock requiring blasting for founadtion , PCC(1:4:8)mix using 40mm gauge hard granite metal including cost and conveyance of all materials and labour charges etc complete, RCC with M20 grade using 20mm gauge HBG crusher metal including cost and conveyance of all materials and labour charges, centring, mixing, curing charges but excluding cost and fabrication charges of steel for reinforcement for raftCost and fabrication charges of Steel for reinforcement including cutting, bending, cranking, tying with binding wire etc complete. including fabrication charges, welding including cost of material transportation labour charges including 2 coats of best quality blue colour enamail paint including fixing charges all incidental and operational charges etc complete for finished item of work,,and contractor profit.The work shall be executed based on the approved designs and drawings of the department.

Water Supply;Construction of pipelines for water supply with HDPE PE-100 grade 75mm dia 8 kg/cm2 pipes as per IS 4984:1995 with its amendments and revisions thereon and including supplying of pipes,necessary specials such as bends, Tees, etc as per site requirements, lowering, laying and jointing of pipes (with butt fusion welding) true to alignment and gradient, excavation of Pipeline trench (Earthwork excavation in all soils upto SDR using machine rate for 2/3rd and manual rate for 1/3rd of quantity) of pipelines in all soils except rock requiring blasting and refilling trenches with excavated earth (other than rocky soils, boulders and BC Soils) with watering and tamping and removing surplus earth from site of work and filling pipeline with water and testing to the required pressure etc., completely. The rates are inclusive of cost and conveyance of all materials and labour charges and all incidental and operational charges for finished item of pipeline work,and contractor profit. The work shall be executed based on the approved designs and drawings of the department.

Water Supply;Construction of pipelines for water supply with HDPE PE-100 grade 75mm dia 6 kg/cm2 pipes as per IS 4984:1995 with its amendments and revisions thereon and including supplying of pipes,necessary specials such as bends, Tees, etc as per site requirements, lowering, laying and jointing of pipes (with butt fusion welding) true to alignment and gradient, excavation of Pipeline trench (Earthwork excavation in all soils upto SDR using machine rate for 2/3rd and manual rate for 1/3rd of quantity) of pipelines in all soils except rock requiring blasting and refilling trenches with excavated earth (other than rocky soils, boulders and BC Soils) with watering and tamping and removing surplus earth from site of work and filling pipeline with water and testing to the required pressure etc., completely. The rates are inclusive of cost and conveyance of all materials and labour charges and all incidental and operational charges for finished item of pipeline work,and contractor profit. The work shall be executed based on the approved designs and drawings of the department.

Water Supply;Construction of pipelines for water supply with HDPE PE-100 grade 63mm dia 6 kg/cm2 pipes as per IS 4984:1995 with its amendments and revisions thereon and including supplying of pipes,necessary specials such as bends, Tees, etc as per site requirements, lowering, laying and jointing of pipes (with butt fusion welding) true to alignment and gradient, excavation of Pipeline trench (Earthwork excavation in all soils upto SDR using machine rate for 2/3rd and manual rate for 1/3rd of quantity) of pipelines in all soils except rock requiring blasting and refilling trenches with excavated earth (other than rocky soils, boulders and BC Soils) with watering and tamping and removing surplus earth from site of work and filling pipeline with water and testing to the required pressure etc., completely. The rates are inclusive of cost and conveyance of all materials and labour charges and all incidental and operational charges for finished item of pipeline work and contractor profit. The work shall be executed based on the approved designs and drawings of the department.

Water Supply;40KL OHSR with 12m Staging - Construction of OHSRs/ELSRs with a staging of 12 m for Zone-II Seismicand excluding Seigniorage charges.NOTE: -1) For intermediate ranges proportional rates may beadopted. All VRCC minimum of M30 grade design mix.2)The above rates are applicable for Elevated Level ServicesReservoirs / OHSRs with Raft Foundation and a rate ofRs.5500/- per tonne for Cement and Rs.41500/- per tonne forSteel.3) For every metre of staging less than 12 m, the rate shall bereduced by Rs.0.05 paise per litre per every metre ofdifference in staging.4) For every metre of staging above 12 m , the rate shall beincrease by Rs.0.10 paise per litre per every metre ofadditional in staging.5)The above rates shall be increased / decreased due toincrease / decrease in the cost of Cement byBasic Rate x (Rc-5500)/5500 x 0.069Rc = Rate of Cement (Rs per MT) at the time of preparation ofestimate6)The above rates shall be increased / decreased due toincrease / decrease in the cost of Steel byBasic Rate x (Rs-41500)/41500 x 0.135Rs = Rate of Steel (Rs per MT) (Fe-500/500D/550D from PrimaryProducers)at the time of preparation of estimate.The above formula applicable only for preparation of estimate.The price adjustment shall be adopted on the actual consumption of Steel and Cement.7) Rate inclusive of three coats of food grade epoxy paint toinner surface of the reservoir including roof dome.8) The above rates be adopted for estimate purposes forconstruction of ELSR for a finished work including 2 coats ofweather proof emulsion painting for external surfaces over onecoat of primer of approved make, lettering, all requiredfixtures, pipes, bends, valves etc., for pipe connections butdesigns and drawings.9) The above rates are applicable for wind pressures upto 250kg / sq m. For decrease in wind pressure the rate has to bedecreased by 2.5% per every 50 kg/sqm. If the ELSR / OHSR is tobe designed for seismic forces also, cost shall be arrived byworking out detailed quantities based on the designs.10) For Tribal/Agency area, the above rates shall be increasedby 5%.11)If the ELSR is to be designed for seismic forces a) The aboverates are applied upto Zone-II earth quake. b) for Zone-III earthquake the above rates are to be increased by 15%.12) Fixtures include :a) RCC or Aluminium ladder inside 0.60 m wide.b) spiral staircase on the outside shall be provided up to 200KLELSR. Above 200KL ELSR Capacity, dog legged staircase shall beprovided with staircase flight width of 1.0mts and landing widthof 1.20m. S.S railing to stair case upto 1.2m height.c) Lightning arrestor, including conductor and earthing etc withrelevant IS codes.d) RCC ventilators with copper or stainless Steel fly proof mesh.e) D.I Manholes frame and cover 0.60x0.60 m as per ISspecifications (light duty) - 2 Nos.f) Water level indicator of good quality with ebonite/ copperfloat approved pattern - 1 No.g) The ladder shall be with Aluminium and Verticals with HDPEof 10kg/Sqcm shall be provided for single column OHSRs only.h) The increase in staging shall be at 1.0mt interval.i)The railing provided to the gallery and stair case shall be withstainless Steel of grade 304 for a height of 1.20m.j)The dog legged staircase shall be enclosed with brick/CRS wallon three sides and front side with PVC door of standard make upto 1st brace level from ground level to prevent unauthorizedentry.k) D.I swan neck ventilators shall be provided in top dome andslab-4Nos minimum.l) The above rates are exclusive of all inlet, outlet connections,valves and bolts & nuts but including labour charges forhoisting, jointing with rubber insertion, nuts and bolts. All valves near inlet, outlet and for scour of ELSRs shall be D.I. valves. Supply and delivery of DI D/F Gate valves ( soft Seated ) valves conforming to IS 3896-oart 2-1985 wedge fully rubber lined with EPDM food grade quality and the valve should be of vacuum tight and 100% leak proof with face to face dimensions. All the valves should be with Electrostatic powder caoting both insisde and outside pockets body passages.Drilled as per IS: 1538Cost of Dismantling Joint (up to 300 mm dia CI and above 300 mm dia MSTransportation chargers (5% of basic cost)Cost of DI Duck foot bendCost of 0.6m DI D/F pipes 3nosCost of DI Semicircular bendJointing materials such as bolts nuts and rubber vouchers - 7 JobsJointing materials such as bolts nuts and rubber washers for valve fixing - 2JobsLabour charges for lowering DI pipes & Bends (5 jobs)Sluice valve lowering and fixing charges. - Including Cost of RCC valve chamber, Cost of Verticals & including contractors profit 13.6150%

Water Supply;250 KL OHSR - Construction of OHSRs/ELSRs with a staging of 12 m for Zone-II Seismicand excluding Seigniorage charges.NOTE: -1) For intermediate ranges proportional rates may beadopted. All VRCC minimum of M30 grade design mix.2)The above rates are applicable for Elevated Level ServicesReservoirs / OHSRs with Raft Foundation and a rate ofRs.5500/- per tonne for Cement and Rs.41500/- per tonne forSteel.3) For every metre of staging less than 12 m, the rate shall bereduced by Rs.0.05 paise per litre per every metre ofdifference in staging.4) For every metre of staging above 12 m , the rate shall beincrease by Rs.0.10 paise per litre per every metre ofadditional in staging.5)The above rates shall be increased / decreased due toincrease / decrease in the cost of Cement byBasic Rate x (Rc-5500)/5500 x 0.069Rc = Rate of Cement (Rs per MT) at the time of preparation ofestimate6)The above rates shall be increased / decreased due toincrease / decrease in the cost of Steel byBasic Rate x (Rs-41500)/41500 x 0.135Rs = Rate of Steel (Rs per MT) (Fe-500/500D/550D from PrimaryProducers)at the time of preparation of estimate.The above formula applicable only for preparation of estimate.The price adjustment shall be adopted on the actual consumption of Steel and Cement.7) Rate inclusive of three coats of food grade epoxy paint toinner surface of the reservoir including roof dome.8) The above rates be adopted for estimate purposes forconstruction of ELSR for a finished work including 2 coats ofweather proof emulsion painting for external surfaces over onecoat of primer of approved make, lettering, all requiredfixtures, pipes, bends, valves etc., for pipe connections butdesigns and drawings.9) The above rates are applicable for wind pressures upto 250kg / sq m. For decrease in wind pressure the rate has to bedecreased by 2.5% per every 50 kg/sqm. If the ELSR / OHSR is tobe designed for seismic forces also, cost shall be arrived byworking out detailed quantities based on the designs.10) For Tribal/Agency area, the above rates shall be increasedby 5%.11)If the ELSR is to be designed for seismic forces a) The aboverates are applied upto Zone-II earth quake. b) for Zone-III earthquake the above rates are to be increased by 15%.12) Fixtures include :a) RCC or Aluminium ladder inside 0.60 m wide.b) spiral staircase on the outside shall be provided up to 200KLELSR. Above 200KL ELSR Capacity, dog legged staircase shall beprovided with staircase flight width of 1.0mts and landing widthof 1.20m. S.S railing to stair case upto 1.2m height.c) Lightning arrestor, including conductor and earthing etc withrelevant IS codes.d) RCC ventilators with copper or stainless Steel fly proof mesh.e) D.I Manholes frame and cover 0.60x0.60 m as per ISspecifications (light duty) - 2 Nos.f) Water level indicator of good quality with ebonite/ copperfloat approved pattern - 1 No.g) The ladder shall be with Aluminium and Verticals with HDPEof 10kg/Sqcm shall be provided for single column OHSRs only.h) The increase in staging shall be at 1.0mt interval.i)The railing provided to the gallery and stair case shall be withstainless Steel of grade 304 for a height of 1.20m.j)The dog legged staircase shall be enclosed with brick/CRS wallon three sides and front side with PVC door of standard make upto 1st brace level from ground level to prevent unauthorizedentry.k) D.I swan neck ventilators shall be provided in top dome andslab-4Nos minimum.l) The above rates are exclusive of all inlet, outlet connections,valves and bolts & nuts but including labour charges forhoisting, jointing with rubber insertion, nuts and bolts. All valves near inlet, outlet and for scour of ELSRs shall be D.I. valves. Supply and delivery of DI D/F Gate valves ( soft Seated ) valves conforming to IS 3896-oart 2-1985 wedge fully rubber lined with EPDM food grade quality and the valve should be of vacuum tight and 100% leak proof with face to face dimensions. All the valves should be with Electrostatic powder caoting both insisde and outside pockets body passages.Drilled as per IS: 1538Cost of Dismantling Joint (up to 300 mm dia CI and above 300 mm dia MSTransportation chargers (5% of basic cost)Cost of DI Duck foot bendCost of 0.6m DI D/F pipes 3nosCost of DI Semicircular bendJointing materials such as bolts nuts and rubber vouchers - 7 JobsJointing materials such as bolts nuts and rubber washers for valve fixing - 2JobsLabour charges for lowering DI pipes & Bends (5 jobs)Sluice valve lowering and fixing charges. - Including Cost of RCC valve chamber, Cost of Verticals & including contractors profit 13.6150%- 250KL OHSR with 12m Staging

Water Supply;20 KL OHSR- Construction of OHSRs/ELSRs with a staging of 12 m for Zone-II Seismicand excluding Seigniorage charges.NOTE: -1) For intermediate ranges proportional rates may beadopted. All VRCC minimum of M30 grade design mix.2)The above rates are applicable for Elevated Level ServicesReservoirs / OHSRs with Raft Foundation and a rate ofRs.5500/- per tonne for Cement and Rs.41500/- per tonne forSteel.3) For every metre of staging less than 12 m, the rate shall bereduced by Rs.0.05 paise per litre per every metre ofdifference in staging.4) For every metre of staging above 12 m , the rate shall beincrease by Rs.0.10 paise per litre per every metre ofadditional in staging.5)The above rates shall be increased / decreased due toincrease / decrease in the cost of Cement byBasic Rate x (Rc-5500)/5500 x 0.069Rc = Rate of Cement (Rs per MT) at the time of preparation ofestimate6)The above rates shall be increased / decreased due toincrease / decrease in the cost of Steel byBasic Rate x (Rs-41500)/41500 x 0.135Rs = Rate of Steel (Rs per MT) (Fe-500/500D/550D from PrimaryProducers)at the time of preparation of estimate.The above formula applicable only for preparation of estimate.The price adjustment shall be adopted on the actual consumption of Steel and Cement.7) Rate inclusive of three coats of food grade epoxy paint toinner surface of the reservoir including roof dome.8) The above rates be adopted for estimate purposes forconstruction of ELSR for a finished work including 2 coats ofweather proof emulsion painting for external surfaces over onecoat of primer of approved make, lettering, all requiredfixtures, pipes, bends, valves etc., for pipe connections butdesigns and drawings.9) The above rates are applicable for wind pressures upto 250kg / sq m. For decrease in wind pressure the rate has to bedecreased by 2.5% per every 50 kg/sqm. If the ELSR / OHSR is tobe designed for seismic forces also, cost shall be arrived byworking out detailed quantities based on the designs.10) For Tribal/Agency area, the above rates shall be increasedby 5%.11)If the ELSR is to be designed for seismic forces a) The aboverates are applied upto Zone-II earth quake. b) for Zone-III earthquake the above rates are to be increased by 15%.12) Fixtures include :a) RCC or Aluminium ladder inside 0.60 m wide.b) spiral staircase on the outside shall be provided up to 200KLELSR. Above 200KL ELSR Capacity, dog legged staircase shall beprovided with staircase flight width of 1.0mts and landing widthof 1.20m. S.S railing to stair case upto 1.2m height.c) Lightning arrestor, including conductor and earthing etc withrelevant IS codes.d) RCC ventilators with copper or stainless Steel fly proof mesh.e) D.I Manholes frame and cover 0.60x0.60 m as per ISspecifications (light duty) - 2 Nos.f) Water level indicator of good quality with ebonite/ copperfloat approved pattern - 1 No.g) The ladder shall be with Aluminium and Verticals with HDPEof 10kg/Sqcm shall be provided for single column OHSRs only.h) The increase in staging shall be at 1.0mt interval.i)The railing provided to the gallery and stair case shall be withstainless Steel of grade 304 for a height of 1.20m.j)The dog legged staircase shall be enclosed with brick/CRS wallon three sides and front side with PVC door of standard make upto 1st brace level from ground level to prevent unauthorizedentry.k) D.I swan neck ventilators shall be provided in top dome andslab-4Nos minimum.l) The above rates are exclusive of all inlet, outlet connections,valves and bolts & nuts but including labour charges forhoisting, jointing with rubber insertion, nuts and bolts. All valves near inlet, outlet and for scour of ELSRs shall be D.I. valves. Supply and delivery of DI D/F Gate valves ( soft Seated ) valves conforming to IS 3896-oart 2-1985 wedge fully rubber lined with EPDM food grade quality and the valve should be of vacuum tight and 100% leak proof with face to face dimensions. All the valves should be with Electrostatic powder caoting both insisde and outside pockets body passages.Drilled as per IS: 1538Cost of Dismantling Joint (up to 300 mm dia CI and above 300 mm dia MSTransportation chargers (5% of basic cost)Cost of DI Duck foot bendCost of 0.6m DI D/F pipes 3nosCost of DI Semicircular bendJointing materials such as bolts nuts and rubber vouchers - 7 JobsJointing materials such as bolts nuts and rubber washers for valve fixing - 2JobsLabour charges for lowering DI pipes & Bends (5 jobs)Sluice valve lowering and fixing charges. - Including Cost of RCC valve chamber, Cost of Verticals & including contractors profit 13.6150%- 20KL OHSR with 12m Staging

Water Supply;Cost and supply of Steel including fabrication charges for Anchor blocks inclusive of cost and conveyance of all materials and labour charges etc,comp .The work shall be executed based on the approved designs and drawings of the department.

Water Supply;VRCC M20 using 20mm HBG metal including cost and conveyance of all materilas,labour charges and centering etc., complete but excluding cost of steel and its fabrication for Anchor blocks inclusive of cost and conveyance of all materials and labour charges etc,comp. The work shall be executed based on the approved designs and drawings of the department.

Water Supply;Earth work excavation and depositing on bank with an initial lead in all types of soils except hard rock requiring blasting for founadtion for Anchor blocks inclusive of cost and conveyance of all materials and labour charges etc,comp. The work shall be executed based on the approved designs and drawings of the department.

Water Supply;Cutting CC road surface including stacking of excavated materials for pipe line trench work along with contractor profit etc complete.

Water Supply;Supply installation and satifactory field testing of Multijet Inferential Dry Dial screwed end Water Meters conforming to latest editions of IS 779/ISO 4064 with ISI/MID marking (PN-10). The water meters shall be manufactured with copper can/non magnetic metallic register and IP 68 protection. The module must be connected to meter without wire. The same model of the meter must have passed life cycle/Endurance test from FCRI after 2015. The meter should have IP 68 test report certificate conducted in FCRI. The RF based AMR accuracy test conducted at FCRI should also be submitted. The modules shall be warranteed for 5 years battery life. The Module or meter interface unit shall be Radio Frequency based. The remote reading shall be two way communicating. The module should be battery operated and external power supply should not be required. The readings should be obtainable by either walkby or drive by on Android device. The module shall be fitted on the meter wirelessly and shall be with IP 68 protection. The IP 68 test report for module should have been conducted at FCRI. The radio frequency shall be as per Dept of Communications, Govt of India and supplier should specify the frequency of the AMR on the module. In case the RF band is free band, necessary documents from Dept. of Telecom, Govt of India shall be submitted along with declaration on a Rs.100 Stamp paper mentioning the band. The RF based meter reading software should have sync facility to upload the data back to CLOUD server after reading the meters from site using GPRS/Wifi. The AMR meters shall carry warranty of atleast 5 years from the date of delivery/date of installation which ever is earlier. The meter, module and AMR software shall be from the same manufacturer. Lot samples of the meters supplied shall be tested as per IS779 at FCRI for accuracy of meters.including dismantling joint, reducers, MS flanges,GI pipe, jointing materials and RCC valve chamber including Earth work excavation and depositing on bank with an initial lead of 50m and lift of 3.0m in all types of soils except hard rock requiring blasting for founadtion , PCC(1:4:8)mix using 40mm gauge hard granite metal including cost and conveyance of all materials and labour charges etc complete, RCC(1:1.5:3)prop using 20mm gauge HG crusher metal including cost and conveyance of all materials and labour charges, centring, mixing, curing charges but excluding cost and fabrication charges of steel for reinforcement for Side short wall upto bottom slab, side wall, top slab, Cost and fabrication charges of Steel for reinforcement including cutting, bending, cranking, tying with binding wire etc complete including contractor profit.

Water Supply;S& F 50 mm Nominal Bore GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings &labour charges , Contractor profit etc complete

Water Supply;Manufacture, Supply and delivery of DI D/F Gate Valves (Soft Seated) Resilient seated soft sealing gate valves (Sluicevalves) with body bonnet of ductile cast iron of grade GGG-40/ SG- 400/15 orGGG-50/SG-500/7 or equivalent grade asper I.S.3896-part2-1985 and subsequentrevisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163- 89/IS14846-2000/DIN 3202 F 4. All the valves should be with Electrostatic powder coating both inside and outside pocket less body passageDrilled as per IS: 1538 with Manufacture, Supply and Delivery of C.I Dismantling Joints with both side flange end suitable for installation in between flange end pipes including transportation charges ,DI Flanged sockets,Jointing materials such as bolts nuts and rubber vouchers including material cost for main line including labour charges for lowering of Di Pipes, Lowering of valve and keeping in position, along with RCC Valve and chamber including Earth work excavation and depositing on bank with an initial lead of 50m and lift of 3.0m in all types of soils except hard rock requiring blasting for founadtion , PCC(1:4:8)mix using 40mm gauge hard granite metal including cost and conveyance of all materials and labour charges etc complete, RCC(1:1.5:3)prop using 20mm gauge HG crusher metal including cost and conveyance of all materials and labour charges, centring, mixing, curing charges but excluding cost and fabrication charges of steel for reinforcement for Side short wall upto bottom slab, side wall, top slab, Cost and fabrication charges of Steel for reinforcement including cutting, bending, cranking, tying with binding wire etc complete including contractor profit of 100mm on 100mm DI dia pipeline

Water Supply;Manufacture, Supply and delivery of DI D/F Gate Valves (Soft Seated) Resilient seated soft sealing gate valves (Sluicevalves) with body bonnet of ductile cast iron of grade GGG-40/ SG- 400/15 orGGG-50/SG-500/7 or equivalent grade asper I.S.3896-part2-1985 and subsequentrevisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163- 89/IS14846-2000/DIN 3202 F 4. All the valves should be with Electrostatic powder coating both inside and outside pocket less body passageDrilled as per IS: 1538 with Manufacture, Supply and Delivery of C.I Dismantling Joints with both side flange end suitable for installation in between flange end pipes including transportation charges , HDPE Tail pieces, MS Flanges,Jointing materials such as bolts nuts and rubber vouchers including material cost for main line including labour charges for lowering of Di Pipes, Lowering of valve and keeping in position, along with RCC Valve and chamber including Earth work excavation and depositing on bank with an initial lead of 50m and lift of 3.0m in all types of soils except hard rock requiring blasting for founadtion , PCC(1:4:8)mix using 40mm gauge hard granite metal including cost and conveyance of all materials and labour charges etc complete, RCC(1:1.5:3)prop using 20mm gauge HG crusher metal including cost and conveyance of all materials and labour charges, centring, mixing, curing charges but excluding cost and fabrication charges of steel for reinforcement for Side short wall upto bottom slab, side wall, top slab, Cost and fabrication charges of Steel for reinforcement including cutting, bending, cranking, tying with binding wire etc complete including contractor profit of 250mm on 250mm HDPE dia pipeline

Water Supply;Manufacture, Supply and delivery of DI D/F Gate Valves (Soft Seated) Resilient seated soft sealing gate valves (Sluicevalves) with body bonnet of ductile cast iron of grade GGG-40/ SG- 400/15 orGGG-50/SG-500/7 or equivalent grade asper I.S.3896-part2-1985 and subsequentrevisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163- 89/IS14846-2000/DIN 3202 F 4. All the valves should be with Electrostatic powder coating both inside and outside pocket less body passageDrilled as per IS: 1538 with Manufacture, Supply and Delivery of C.I Dismantling Joints with both side flange end suitable for installation in between flange end pipes including transportation charges , HDPE Tail pieces, MS Flanges,Jointing materials such as bolts nuts and rubber vouchers including material cost for main line including labour charges for lowering of Di Pipes, Lowering of valve and keeping in position, along with RCC Valve and chamber including Earth work excavation and depositing on bank with an initial lead of 50m and lift of 3.0m in all types of soils except hard rock requiring blasting for founadtion , PCC(1:4:8)mix using 40mm gauge hard granite metal including cost and conveyance of all materials and labour charges etc complete, RCC(1:1.5:3)prop using 20mm gauge HG crusher metal including cost and conveyance of all materials and labour charges, centring, mixing, curing charges but excluding cost and fabrication charges of steel for reinforcement for Side short wall upto bottom slab, side wall, top slab, Cost and fabrication charges of Steel for reinforcement including cutting, bending, cranking, tying with binding wire etc complete including contractor profit of 200mm on 200mm HDPE dia pipeline

Water Supply;Manufacture, Supply and delivery of DI D/F Gate Valves (Soft Seated) Resilient seated soft sealing gate valves (Sluicevalves) with body bonnet of ductile cast iron of grade GGG-40/ SG- 400/15 orGGG-50/SG-500/7 or equivalent grade asper I.S.3896-part2-1985 and subsequentrevisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163- 89/IS14846-2000/DIN 3202 F 4. All the valves should be with Electrostatic powder coating both inside and outside pocket less body passageDrilled as per IS: 1538 with Manufacture, Supply and Delivery of C.I Dismantling Joints with both side flange end suitable for installation in between flange end pipes including transportation charges , HDPE Tail pieces, MS Flanges,Jointing materials such as bolts nuts and rubber vouchers including material cost for main line including labour charges for lowering of Di Pipes, Lowering of valve and keeping in position, along with RCC Valve and chamber including Earth work excavation and depositing on bank with an initial lead of 50m and lift of 3.0m in all types of soils except hard rock requiring blasting for founadtion , PCC(1:4:8)mix using 40mm gauge hard granite metal including cost and conveyance of all materials and labour charges etc complete, RCC(1:1.5:3)prop using 20mm gauge HG crusher metal including cost and conveyance of all materials and labour charges, centring, mixing, curing charges but excluding cost and fabrication charges of steel for reinforcement for Side short wall upto bottom slab, side wall, top slab, Cost and fabrication charges of Steel for reinforcement including cutting, bending, cranking, tying with binding wire etc complete including contractor profit of 150mm on 180mm HDPE dia pipeline

Water Supply;Manufacture, Supply and delivery of DI D/F Gate Valves (Soft Seated) Resilient seated soft sealing gate valves (Sluicevalves) with body bonnet of ductile cast iron of grade GGG-40/ SG- 400/15 orGGG-50/SG-500/7 or equivalent grade asper I.S.3896-part2-1985 and subsequentrevisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163- 89/IS14846-2000/DIN 3202 F 4. All the valves should be with Electrostatic powder coating both inside and outside pocket less body passageDrilled as per IS: 1538 with Manufacture, Supply and Delivery of C.I Dismantling Joints with both side flange end suitable for installation in between flange end pipes including transportation charges , HDPE Tail pieces, MS Flanges,Jointing materials such as bolts nuts and rubber vouchers including material cost for main line including labour charges for lowering of Di Pipes, Lowering of valve and keeping in position, along with RCC Valve and chamber including Earth work excavation and depositing on bank with an initial lead of 50m and lift of 3.0m in all types of soils except hard rock requiring blasting for founadtion , PCC(1:4:8)mix using 40mm gauge hard granite metal including cost and conveyance of all materials and labour charges etc complete, RCC(1:1.5:3)prop using 20mm gauge HG crusher metal including cost and conveyance of all materials and labour charges, centring, mixing, curing charges but excluding cost and fabrication charges of steel for reinforcement for Side short wall upto bottom slab, side wall, top slab, Cost and fabrication charges of Steel for reinforcement including cutting, bending, cranking, tying with binding wire etc complete including contractor profit of 80mm on 75mm HDPE dia pipeline

Water Supply;Manufacture, Supply and delivery of DI D/F Gate Valves (Soft Seated) Resilient seated soft sealing gate valves (Sluicevalves) with body bonnet of ductile cast iron of grade GGG-40/ SG- 400/15 orGGG-50/SG-500/7 or equivalent grade asper I.S.3896-part2-1985 and subsequentrevisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163- 89/IS14846-2000/DIN 3202 F 4. All the valves should be with Electrostatic powder coating both inside and outside pocket less body passageDrilled as per IS: 1538 with Manufacture, Supply and Delivery of C.I Dismantling Joints with both side flange end suitable for installation in between flange end pipes including transportation charges , HDPE Tail pieces, MS Flanges,Jointing materials such as bolts nuts and rubber vouchers including material cost for main line including labour charges for lowering of Di Pipes, Lowering of valve and keeping in position, along with RCC Valve and chamber including Earth work excavation and depositing on bank with an initial lead of 50m and lift of 3.0m in all types of soils except hard rock requiring blasting for founadtion , PCC(1:4:8)mix using 40mm gauge hard granite metal including cost and conveyance of all materials and labour charges etc complete, RCC(1:1.5:3)prop using 20mm gauge HG crusher metal including cost and conveyance of all materials and labour charges, centring, mixing, curing charges but excluding cost and fabrication charges of steel for reinforcement for Side short wall upto bottom slab, side wall, top slab, Cost and fabrication charges of Steel for reinforcement including cutting, bending, cranking, tying with binding wire etc complete including contractor profit of 80mm on 63mm HDPE dia pipeline

Water Supply;Supply and delivery of Single Chamber DI Air Valve of PN 1.6 rated with Body and cover in Ductile Iron of grade GGG40/SG-400/15 or GGG-50/SG-500/7 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions. All internal parts such as float, shell etc., all cover bolts, of stainless steel, and Gaskets and seals of EPDM food grade quality Epoxy powder coating (EP-P) inside and outside colour blue, drilled as per IS:1538.withSupply and delivery of DI D/F Gate Valves (Soft Seated) Resilient seated soft sealing gate valves (Sluicevalves) with body bonnet of ductile cast iron of grade GGG-40/ SG- 400/15 or GGG-50/SG-500/7 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163- 89/IS14846-2000/DIN 3202 F 4. All the valves should be with Electrostaticpowder coating both inside and outside pocket less body passage, drilled as per IS:1538, including supply of Air Tee DI A/Fto suit the main pipe and Air Valve including laying, jointing of Air Tee DI A/F, 0.6m D/F DI pipes, D/F Vertical Stem Pipe, HDPE tail pieces , MS Flanges 2nos for main pipe and Jointing materials such as bolts nuts and rubber vouchers including material cost for main line - 4nos and 'Jointing materials such as bolts nuts and rubber washers for Air valve and Isolated Gate Valve and extra stem pipe fixing includes labour charges for lowering DI pipes and tees and fixing of Air valve with isolated sluice Valve to the stem D/F DI pipe along with RCC (1:1.5:3) Footing + Stem Column Earth work excavation and depositing on bank with an initial lead of 50m and lift of 3.0m in all types of soils except hard rock requiring blasting for founadtion, PCC(1:4:8)mix using 40mm gauge hard granite metal including cost and conveyance of all materials and labour charges etc complete,RCC(1:1.5:3)prop using 20mm gauge HG crusher metal including cost and conveyance of all materials and labour charges, centring, mixing, curing charges but excluding cost and fabrication charges of steel for reinforcement for Side short wall upto bottom slab , sidewall and top slab, Cost and fabrication charges of Steel for reinforcement including cutting, bending, cranking, tying with binding wire etc complete. cutting, bending, cranking, tying with binding wire etc complete. including fabrication charges, welding including cost of material transportation labour charges including 2 coats of best quality blue colour enamail paint including fixing charges all incidental and operational charges etc complete for finished item of work,,and contractor profit.The work shall be executed based on the approved designs and drawings of the department of . 50mm on 180mm HDPE dia pipelines

Water Supply;Supply and delivery of Single Chamber DI Air Valve of PN 1.6 rated with Body and cover in Ductile Iron of grade GGG40/SG-400/15 or GGG-50/SG-500/7 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions. All internal parts such as float, shell etc., all cover bolts, of stainless steel, and Gaskets and seals of EPDM food grade quality Epoxy powder coating (EP-P) inside and outside colour blue, drilled as per IS:1538.withSupply and delivery of DI D/F Gate Valves (Soft Seated) Resilient seated soft sealing gate valves (Sluicevalves) with body bonnet of ductile cast iron of grade GGG-40/ SG- 400/15 or GGG-50/SG-500/7 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163- 89/IS14846-2000/DIN 3202 F 4. All the valves should be with Electrostaticpowder coating both inside and outside pocket less body passage, drilled as per IS:1538, including supply of Air Tee DI A/Fto suit the main pipe and Air Valve including laying, jointing of Air Tee DI A/F, 0.6m D/F DI pipes, D/F Vertical Stem Pipe, HDPE tail pieces , MS Flanges 2nos for main pipe and Jointing materials such as bolts nuts and rubber vouchers including material cost for main line - 4nos and 'Jointing materials such as bolts nuts and rubber washers for Air valve and Isolated Gate Valve and extra stem pipe fixing includes labour charges for lowering DI pipes and tees and fixing of Air valve with isolated sluice Valve to the stem D/F DI pipe along with RCC (1:1.5:3) Footing + Stem Column Earth work excavation and depositing on bank with an initial lead of 50m and lift of 3.0m in all types of soils except hard rock requiring blasting for founadtion, PCC(1:4:8)mix using 40mm gauge hard granite metal including cost and conveyance of all materials and labour charges etc complete,RCC(1:1.5:3)prop using 20mm gauge HG crusher metal including cost and conveyance of all materials and labour charges, centring, mixing, curing charges but excluding cost and fabrication charges of steel for reinforcement for Side short wall upto bottom slab , sidewall and top slab, Cost and fabrication charges of Steel for reinforcement including cutting, bending, cranking, tying with binding wire etc complete. cutting, bending, cranking, tying with binding wire etc complete. including fabrication charges, welding including cost of material transportation labour charges including 2 coats of best quality blue colour enamail paint including fixing charges all incidental and operational charges etc complete for finished item of work,,and contractor profit.The work shall be executed based on the approved designs and drawings of the department of . 50mm on 75mm HDPE dia pipelines

Water Supply;Supply and delivery of Single Chamber DI Air Valve of PN 1.6 rated with Body and cover in Ductile Iron of grade GGG40/SG-400/15 or GGG-50/SG-500/7 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions. All internal parts such as float, shell etc., all cover bolts, of stainless steel, and Gaskets and seals of EPDM food grade quality Epoxy powder coating (EP-P) inside and outside colour blue, drilled as per IS:1538.withSupply and delivery of DI D/F Gate Valves (Soft Seated) Resilient seated soft sealing gate valves (Sluicevalves) with body bonnet of ductile cast iron of grade GGG-40/ SG- 400/15 or GGG-50/SG-500/7 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163- 89/IS14846-2000/DIN 3202 F 4. All the valves should be with Electrostaticpowder coating both inside and outside pocket less body passage, drilled as per IS:1538, including supply of Air Tee DI A/Fto suit the main pipe and Air Valve including laying, jointing of Air Tee DI A/F, 0.6m D/F DI pipes, D/F Vertical Stem Pipe, HDPE tail pieces , MS Flanges 2nos for main pipe and Jointing materials such as bolts nuts and rubber vouchers including material cost for main line - 4nos and 'Jointing materials such as bolts nuts and rubber washers for Air valve and Isolated Gate Valve and extra stem pipe fixing includes labour charges for lowering DI pipes and tees and fixing of Air valve with isolated sluice Valve to the stem D/F DI pipe along with RCC (1:1.5:3) Footing + Stem Column Earth work excavation and depositing on bank with an initial lead of 50m and lift of 3.0m in all types of soils except hard rock requiring blasting for founadtion, PCC(1:4:8)mix using 40mm gauge hard granite metal including cost and conveyance of all materials and labour charges etc complete,RCC(1:1.5:3)prop using 20mm gauge HG crusher metal including cost and conveyance of all materials and labour charges, centring, mixing, curing charges but excluding cost and fabrication charges of steel for reinforcement for Side short wall upto bottom slab , sidewall and top slab, Cost and fabrication charges of Steel for reinforcement including cutting, bending, cranking, tying with binding wire etc complete. cutting, bending, cranking, tying with binding wire etc complete. including fabrication charges, welding including cost of material transportation labour charges including 2 coats of best quality blue colour enamail paint including fixing charges all incidental and operational charges etc complete for finished item of work,,and contractor profit.The work shall be executed based on the approved designs and drawings of the department of 50mm on 63mm HDPE dia pipelines

Water Supply;Construction of pipelines for water supply with HDPE PE-100 grade 180mm dia 6 kg/cm2 pipes as per IS 4984:1995 with its amendments and revisions thereon and including supplying of pipes,necessary specials such as bends, Tees, etc as per site requirements, lowering, laying and jointing of pipes (with butt fusion welding) true to alignment and gradient, excavation of Pipeline trench (Earthwork excavation in all soils upto SDR using machine rate for 2/3rd and manual rate for 1/3rd of quantity) of pipelines in all soils except rock requiring blasting and refilling trenches with excavated earth (other than rocky soils, boulders and BC Soils) with watering and tamping and removing surplus earth from site of work and filling pipeline with water and testing to the required pressure etc., completely. The rates are inclusive of cost and conveyance of all materials and labour charges and all incidental and operational charges for finished item of pipeline work, the rate is including all taxes. The work shall be executed based on the approved designs and drawings of the department.

Water Supply;Construction of pipelines for water supply with HDPE PE-100 grade 75mm dia 10 kg/cm2 pipes as per IS 4984:1995 with its amendments and revisions thereon and including supplying of pipes,necessary specials such as bends, Tees, etc as per site requirements, lowering, laying and jointing of pipes (with butt fusion welding) true to alignment and gradient, excavation of Pipeline trench (Earthwork excavation in all soils upto SDR using machine rate for 2/3rd and manual rate for 1/3rd of quantity) of pipelines in all soils except rock requiring blasting and refilling trenches with excavated earth (other than rocky soils, boulders and BC Soils) with watering and tamping and removing surplus earth from site of work and filling pipeline with water and testing to the required pressure etc., completely. The rates are inclusive of cost and conveyance of all materials and labour charges and all incidental and operational charges for finished item of pipeline work, the rate is including contractor profit. The work shall be executed based on the approved designs and drawings of the department.

Water Supply;Construction of pipelines for water supply with HDPE PE-100 grade 75mm dia 6 kg/cm2 pipes as per IS 4984:1995 with its amendments and revisions thereon and including supplying of pipes,necessary specials such as bends, Tees, etc as per site requirements, lowering, laying and jointing of pipes (with butt fusion welding) true to alignment and gradient, excavation of Pipeline trench (Earthwork excavation in all soils upto SDR using machine rate for 2/3rd and manual rate for 1/3rd of quantity) of pipelines in all soils except rock requiring blasting and refilling trenches with excavated earth (other than rocky soils, boulders and BC Soils) with watering and tamping and removing surplus earth from site of work and filling pipeline with water and testing to the required pressure etc., completely. The rates are inclusive of cost and conveyance of all materials and labour charges and all incidental and operational charges for finished item of pipeline work, the rate is including contractor profit. The work shall be executed based on the approved designs and drawings of the department.

Water Supply;Construction of pipelines for water supply with HDPE PE-100 grade 63mm dia 10 kg/cm2 pipes as per IS 4984:1995 with its amendments and revisions thereon and including supplying of pipes,necessary specials such as bends, Tees, etc as per site requirements, lowering, laying and jointing of pipes (with butt fusion welding) true to alignment and gradient, excavation of Pipeline trench (Earthwork excavation in all soils upto SDR using machine rate for 2/3rd and manual rate for 1/3rd of quantity) of pipelines in all soils except rock requiring blasting and refilling trenches with excavated earth (other than rocky soils, boulders and BC Soils) with watering and tamping and removing surplus earth from site of work and filling pipeline with water and testing to the required pressure etc., completely. The rates are inclusive of cost and conveyance of all materials and labour charges and all incidental and operational charges for finished item of pipeline work, the rate is including contractor profit. The work shall be executed based on the approved designs and drawings of the department.

Water Supply;Construction of pipelines for water supply with HDPE PE-100 grade 63mm dia 8 kg/cm2 pipes as per IS 4984:1995 with its amendments and revisions thereon and including supplying of pipes,necessary specials such as bends, Tees, etc as per site requirements, lowering, laying and jointing of pipes (with butt fusion welding) true to alignment and gradient, excavation of Pipeline trench (Earthwork excavation in all soils upto SDR using machine rate for 2/3rd and manual rate for 1/3rd of quantity) of pipelines in all soils except rock requiring blasting and refilling trenches with excavated earth (other than rocky soils, boulders and BC Soils) with watering and tamping and removing surplus earth from site of work and filling pipeline with water and testing to the required pressure etc., completely. The rates are inclusive of cost and conveyance of all materials and labour charges and all incidental and operational charges for finished item of pipeline work, the rate is including contractor profit. The work shall be executed based on the approved designs and drawings of the department.

Water Supply;Construction of pipelines for water supply with HDPE PE-100 grade 63mm dia 6 kg/cm2 pipes as per IS 4984:1995 with its amendments and revisions thereon and including supplying of pipes,necessary specials such as bends, Tees, etc as per site requirements, lowering, laying and jointing of pipes (with butt fusion welding) true to alignment and gradient, excavation of Pipeline trench (Earthwork excavation in all soils upto SDR using machine rate for 2/3rd and manual rate for 1/3rd of quantity) of pipelines in all soils except rock requiring blasting and refilling trenches with excavated earth (other than rocky soils, boulders and BC Soils) with watering and tamping and removing surplus earth from site of work and filling pipeline with water and testing to the required pressure etc., completely. The rates are inclusive of cost and conveyance of all materials and labour charges and all incidental and operational charges for finished item of pipeline work, the rate is including contractor profit. The work shall be executed based on the approved designs and drawings of the department.

Water Supply;Construction of pipelines for water supply with 100 mm dia DI - K9 centrifugally cast (spun) Ductile Iron S/S pipes with cement mortar lining inside the pipe as per IS 8329:2000 with its amendments and revisions thereon and with rubber gaskets as per IS:4179, including supply of pipes and rubber gaskets, Tyton joints as per IS:13382-1992 and DI specials as per site requirements, lowering, laying and jointing of pipes true to alignment and gradient, excavation of Pipeline trench (Earthwork excavation in all soils upto SDR using machine rate for 2/3rd and manual rate for 1/3rd of quantity) of pipelines in all soils except rock requiring blasting and refilling trenches with excavated earth (other than rocky soils, boulders and BC Soils) with watering and tamping and removing surplus earth from site of work and filling pipeline with water and testing to the required pressure etc., complete., The rates are inclusive of cost and conveyance of all materials and labour charges and all incidental and operational charges for finished item of pipeline work, and the rate is including contractor profit .The work shall be executed based on the approved designs and drawings of the department.

Water Supply;Supply installation and satifactory field testing of Multijet Inferential Dry Dial screwed end Water Meters conforming to latest editions of IS 779/ISO 4064 with ISI/MID marking (PN-10). The water meters shall be manufactured with copper can/non magnetic metallic register and IP 68 protection. The module must be connected to meter without wire. The same model of the meter must have passed life cycle/Endurance test from FCRI after 2015. The meter should have IP 68 test report certificate conducted in FCRI. The RF based AMR accuracy test conducted at FCRI should also be submitted. The modules shall be warranteed for 5 years battery life. The Module or meter interface unit shall be Radio Frequency based. The remote reading shall be two way communicating. The module should be battery operated and external power supply should not be required. The readings should be obtainable by either walkby or drive by on Android device. The module shall be fitted on the meter wirelessly and shall be with IP 68 protection. The IP 68 test report for module should have been conducted at FCRI. The radio frequency shall be as per Dept of Communications, Govt of India and supplier should specify the frequency of the AMR on the module. In case the RF band is free band, necessary documents from Dept. of Telecom, Govt of India shall be submitted along with declaration on a Rs.100 Stamp paper mentioning the band. The RF based meter reading software should have sync facility to upload the data back to CLOUD server after reading the meters from site using GPRS/Wifi. The AMR meters shall carry warranty of atleast 5 years from the date of delivery/date of installation which ever is earlier. The meter, module and AMR software shall be from the same manufacturer. Lot samples of the meters supplied shall be tested as per IS779 at FCRI for accuracy of meters.including dismantling joint, reducers, MS flanges,GI pipe, jointing materials and RCC valve chamber including Earth work excavation and depositing on bank with an initial lead of 50m and lift of 3.0m in all types of soils except hard rock requiring blasting for founadtion , PCC(1:4:8)mix using 40mm gauge hard granite metal including cost and conveyance of all materials and labour charges etc complete, RCC(1:1.5:3)prop using 20mm gauge HG crusher metal including cost and conveyance of all materials and labour charges, centring, mixing, curing charges but excluding cost and fabrication charges of steel for reinforcement for Side short wall upto bottom slab, side wall, top slab, Cost and fabrication charges of Steel for reinforcement including cutting, bending, cranking, tying with binding wire etc complete including contractor profit.

Water Supply;S& F 50 mm Nominal Bore GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings &labour charges, contractor profit etc complete

Water Supply;Manufacture, Supply and delivery of DI D/F Gate Valves (Soft Seated) Resilient seated soft sealing gate valves (Sluice valves) with body bonnet of ductile cast iron of grade GGG-40/ SG- 400/15 or GGG-50/SG-500/7 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163- 89/IS14846-2000/DIN 3202 F 4. All the valves should be with Electrostatic powder coating both inside and outside pocket less body passage. Drilled as per requirement of the dept including Duck foot bend, 0.6m DI D/F pipes, semi circular bend,Jointing materials such as bolts nuts and rubber vouchers including material cost for main line including labour charges for lowering of Di Pipes, Lowering of valve and keeping in position, along with RCC Valve and chamber including Earth work excavation and depositing on bank with an initial lead of 50m and lift of 3.0m in all types of soils except hard rock requiring blasting for founadtion , PCC(1:4:8)mix using 40mm gauge hard granite metal including cost and conveyance of all materials and labour charges etc complete, RCC(1:1.5:3)prop using 20mm gauge HG crusher metal including cost and conveyance of all materials and labour charges, centring, mixing, curing charges but excluding cost and fabrication charges of steel for reinforcement for Side short wall upto bottom slab, side wall, top slab, Cost and fabrication charges of Steel for reinforcement including cutting, bending, cranking, tying with binding wire etc complete including contractor profit 80mm on 90 mm HDPE dia pipeline

Water Supply;Manufacture, Supply and delivery of DI D/F Gate Valves (Soft Seated) Resilient seated soft sealing gate valves (Sluice valves) with body bonnet of ductile cast iron of grade GGG-40/ SG- 400/15 or GGG-50/SG-500/7 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163- 89/IS14846-2000/DIN 3202 F 4. All the valves should be with Electrostatic powder coating both inside and outside pocket less body passage. Drilled as per requirement of the dept including Duck foot bend, 0.6m DI D/F pipes, semi circular bend,Jointing materials such as bolts nuts and rubber vouchers including material cost for main line including labour charges for lowering of Di Pipes, Lowering of valve and keeping in position, along with RCC Valve and chamber including Earth work excavation and depositing on bank with an initial lead of 50m and lift of 3.0m in all types of soils except hard rock requiring blasting for founadtion , PCC(1:4:8)mix using 40mm gauge hard granite metal including cost and conveyance of all materials and labour charges etc complete, RCC(1:1.5:3)prop using 20mm gauge HG crusher metal including cost and conveyance of all materials and labour charges, centring, mixing, curing charges but excluding cost and fabrication charges of steel for reinforcement for Side short wall upto bottom slab, side wall, top slab, Cost and fabrication charges of Steel for reinforcement including cutting, bending, cranking, tying with binding wire etc complete including contractor profit of 80mm on 75 mm HDPE dia pipeline

Water Supply;Manufacture, Supply and delivery of DI D/F Gate Valves (Soft Seated) Resilient seated soft sealing gate valves (Sluicevalves) with body bonnet of ductile cast iron of grade GGG-40/ SG- 400/15 orGGG-50/SG-500/7 or equivalent grade asper I.S.3896-part2-1985 and subsequentrevisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163- 89/IS14846-2000/DIN 3202 F 4. All the valves should be with Electrostatic powder coating both inside and outside pocket less body passageDrilled as per IS: 1538 with Manufacture, Supply and Delivery of C.I Dismantling Joints with both side flange end suitable for installation in between flange end pipes including transportation charges ,DI Flanged sockets,Jointing materials such as bolts nuts and rubber vouchers including material cost for main line including labour charges for lowering of Di Pipes, Lowering of valve and keeping in position, along with RCC Valve and chamber including Earth work excavation and depositing on bank with an initial lead of 50m and lift of 3.0m in all types of soils except hard rock requiring blasting for founadtion , PCC(1:4:8)mix using 40mm gauge hard granite metal including cost and conveyance of all materials and labour charges etc complete, RCC(1:1.5:3)prop using 20mm gauge HG crusher metal including cost and conveyance of all materials and labour charges, centring, mixing, curing charges but excluding cost and fabrication charges of steel for reinforcement for Side short wall upto bottom slab, side wall, top slab, Cost and fabrication charges of Steel for reinforcement including cutting, bending, cranking, tying with binding wire etc complete including contractor profit 250 on 250 mm DI dia pipeline

Water Supply;Manufacture, Supply and delivery of DI D/F Gate Valves (Soft Seated) Resilient seated soft sealing gate valves (Sluicevalves) with body bonnet of ductile cast iron of grade GGG-40/ SG- 400/15 orGGG-50/SG-500/7 or equivalent grade asper I.S.3896-part2-1985 and subsequentrevisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163- 89/IS14846-2000/DIN 3202 F 4. All the valves should be with Electrostatic powder coating both inside and outside pocket less body passageDrilled as per IS: 1538 with Manufacture, Supply and Delivery of C.I Dismantling Joints with both side flange end suitable for installation in between flange end pipes including transportation charges ,DI Flanged sockets,Jointing materials such as bolts nuts and rubber vouchers including material cost for main line including labour charges for lowering of Di Pipes, Lowering of valve and keeping in position, along with RCC Valve and chamber including Earth work excavation and depositing on bank with an initial lead of 50m and lift of 3.0m in all types of soils except hard rock requiring blasting for founadtion , PCC(1:4:8)mix using 40mm gauge hard granite metal including cost and conveyance of all materials and labour charges etc complete, RCC(1:1.5:3)prop using 20mm gauge HG crusher metal including cost and conveyance of all materials and labour charges, centring, mixing, curing charges but excluding cost and fabrication charges of steel for reinforcement for Side short wall upto bottom slab, side wall, top slab, Cost and fabrication charges of Steel for reinforcement including cutting, bending, cranking, tying with binding wire etc complete including contractor profit of 150mm on 180mm HDPE dia pipeline

Water Supply;Manufacture, Supply and delivery of DI D/F Gate Valves (Soft Seated) Resilient seated soft sealing gate valves (Sluicevalves) with body bonnet of ductile cast iron of grade GGG-40/ SG- 400/15 orGGG-50/SG-500/7 or equivalent grade asper I.S.3896-part2-1985 and subsequentrevisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163- 89/IS14846-2000/DIN 3202 F 4. All the valves should be with Electrostatic powder coating both inside and outside pocket less body passageDrilled as per IS: 1538 with Manufacture, Supply and Delivery of C.I Dismantling Joints with both side flange end suitable for installation in between flange end pipes including transportation charges ,DI Flanged sockets,Jointing materials such as bolts nuts and rubber vouchers including material cost for main line including labour charges for lowering of Di Pipes, Lowering of valve and keeping in position, along with RCC Valve and chamber including Earth work excavation and depositing on bank with an initial lead of 50m and lift of 3.0m in all types of soils except hard rock requiring blasting for founadtion , PCC(1:4:8)mix using 40mm gauge hard granite metal including cost and conveyance of all materials and labour charges etc complete, RCC(1:1.5:3)prop using 20mm gauge HG crusher metal including cost and conveyance of all materials and labour charges, centring, mixing, curing charges but excluding cost and fabrication charges of steel for reinforcement for Side short wall upto bottom slab, side wall, top slab, Cost and fabrication charges of Steel for reinforcement including cutting, bending, cranking, tying with binding wire etc complete including contractor profit of 150mm on 160mm HDPE dia pipeline

Water Supply;Manufacture, Supply and delivery of DI D/F Gate Valves (Soft Seated) Resilient seated soft sealing gate valves (Sluicevalves) with body bonnet of ductile cast iron of grade GGG-40/ SG- 400/15 orGGG-50/SG-500/7 or equivalent grade asper I.S.3896-part2-1985 and subsequentrevisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163- 89/IS14846-2000/DIN 3202 F 4. All the valves should be with Electrostatic powder coating both inside and outside pocket less body passageDrilled as per IS: 1538 with Manufacture, Supply and Delivery of C.I Dismantling Joints with both side flange end suitable for installation in between flange end pipes including transportation charges ,DI Flanged sockets,Jointing materials such as bolts nuts and rubber vouchers including material cost for main line including labour charges for lowering of Di Pipes, Lowering of valve and keeping in position, along with RCC Valve and chamber including Earth work excavation and depositing on bank with an initial lead of 50m and lift of 3.0m in all types of soils except hard rock requiring blasting for founadtion , PCC(1:4:8)mix using 40mm gauge hard granite metal including cost and conveyance of all materials and labour charges etc complete, RCC(1:1.5:3)prop using 20mm gauge HG crusher metal including cost and conveyance of all materials and labour charges, centring, mixing, curing charges but excluding cost and fabrication charges of steel for reinforcement for Side short wall upto bottom slab, side wall, top slab, Cost and fabrication charges of Steel for reinforcement including cutting, bending, cranking, tying with binding wire etc complete including contractor profit of 150mm on 150mm DI dia pipeline

Water Supply;Manufacture, Supply and delivery of DI D/F Gate Valves (Soft Seated) Resilient seated soft sealing gate valves (Sluicevalves) with body bonnet of ductile cast iron of grade GGG-40/ SG- 400/15 orGGG-50/SG-500/7 or equivalent grade asper I.S.3896-part2-1985 and subsequentrevisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163- 89/IS14846-2000/DIN 3202 F 4. All the valves should be with Electrostatic powder coating both inside and outside pocket less body passageDrilled as per IS: 1538 with Manufacture, Supply and Delivery of C.I Dismantling Joints with both side flange end suitable for installation in between flange end pipes including transportation charges ,DI Flanged sockets,Jointing materials such as bolts nuts and rubber vouchers including material cost for main line including labour charges for lowering of Di Pipes, Lowering of valve and keeping in position, along with RCC Valve and chamber including Earth work excavation and depositing on bank with an initial lead of 50m and lift of 3.0m in all types of soils except hard rock requiring blasting for founadtion , PCC(1:4:8)mix using 40mm gauge hard granite metal including cost and conveyance of all materials and labour charges etc complete, RCC(1:1.5:3)prop using 20mm gauge HG crusher metal including cost and conveyance of all materials and labour charges, centring, mixing, curing charges but excluding cost and fabrication charges of steel for reinforcement for Side short wall upto bottom slab, side wall, top slab, Cost and fabrication charges of Steel for reinforcement including cutting, bending, cranking, tying with binding wire etc complete including contractor profit of 100mm on 100mm DI dia pipeline

Water Supply;Manufacture, Supply and delivery of DI D/F Gate Valves (Soft Seated) Resilient seated soft sealing gate valves (Sluicevalves) with body bonnet of ductile cast iron of grade GGG-40/ SG- 400/15 orGGG-50/SG-500/7 or equivalent grade asper I.S.3896-part2-1985 and subsequentrevisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163- 89/IS14846-2000/DIN 3202 F 4. All the valves should be with Electrostatic powder coating both inside and outside pocket less body passageDrilled as per IS: 1538 with Manufacture, Supply and Delivery of C.I Dismantling Joints with both side flange end suitable for installation in between flange end pipes including transportation charges , HDPE Tail pieces, MS Flanges,Jointing materials such as bolts nuts and rubber vouchers including material cost for main line including labour charges for lowering of Di Pipes, Lowering of valve and keeping in position, along with RCC Valve and chamber including Earth work excavation and depositing on bank with an initial lead of 50m and lift of 3.0m in all types of soils except hard rock requiring blasting for founadtion , PCC(1:4:8)mix using 40mm gauge hard granite metal including cost and conveyance of all materials and labour charges etc complete, RCC(1:1.5:3)prop using 20mm gauge HG crusher metal including cost and conveyance of all materials and labour charges, centring, mixing, curing charges but excluding cost and fabrication charges of steel for reinforcement for Side short wall upto bottom slab, side wall, top slab, Cost and fabrication charges of Steel for reinforcement including cutting, bending, cranking, tying with binding wire etc complete including contractor profit 80 on 90mm HDPE dia pipeline

Water Supply;Manufacture, Supply and delivery of DI D/F Gate Valves (Soft Seated) Resilient seated soft sealing gate valves (Sluicevalves) with body bonnet of ductile cast iron of grade GGG-40/ SG- 400/15 orGGG-50/SG-500/7 or equivalent grade asper I.S.3896-part2-1985 and subsequentrevisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163- 89/IS14846-2000/DIN 3202 F 4. All the valves should be with Electrostatic powder coating both inside and outside pocket less body passageDrilled as per IS: 1538 with Manufacture, Supply and Delivery of C.I Dismantling Joints with both side flange end suitable for installation in between flange end pipes including transportation charges , HDPE Tail pieces, MS Flanges,Jointing materials such as bolts nuts and rubber vouchers including material cost for main line including labour charges for lowering of Di Pipes, Lowering of valve and keeping in position, along with RCC Valve and chamber including Earth work excavation and depositing on bank with an initial lead of 50m and lift of 3.0m in all types of soils except hard rock requiring blasting for founadtion , PCC(1:4:8)mix using 40mm gauge hard granite metal including cost and conveyance of all materials and labour charges etc complete, RCC(1:1.5:3)prop using 20mm gauge HG crusher metal including cost and conveyance of all materials and labour charges, centring, mixing, curing charges but excluding cost and fabrication charges of steel for reinforcement for Side short wall upto bottom slab, side wall, top slab, Cost and fabrication charges of Steel for reinforcement including cutting, bending, cranking, tying with binding wire etc complete including contractor profit 80 mm on 75mm HDPE dia pipeline

Water Supply;Manufacture, Supply and delivery of DI D/F Gate Valves (Soft Seated) Resilient seated soft sealing gate valves (Sluicevalves) with body bonnet of ductile cast iron of grade GGG-40/ SG- 400/15 orGGG-50/SG-500/7 or equivalent grade asper I.S.3896-part2-1985 and subsequentrevisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163- 89/IS14846-2000/DIN 3202 F 4. All the valves should be with Electrostatic powder coating both inside and outside pocket less body passageDrilled as per IS: 1538 with Manufacture, Supply and Delivery of C.I Dismantling Joints with both side flange end suitable for installation in between flange end pipes including transportation charges , HDPE Tail pieces, MS Flanges,Jointing materials such as bolts nuts and rubber vouchers including material cost for main line including labour charges for lowering of Di Pipes, Lowering of valve and keeping in position, along with RCC Valve and chamber including Earth work excavation and depositing on bank with an initial lead of 50m and lift of 3.0m in all types of soils except hard rock requiring blasting for founadtion , PCC(1:4:8)mix using 40mm gauge hard granite metal including cost and conveyance of all materials and labour charges etc complete, RCC(1:1.5:3)prop using 20mm gauge HG crusher metal including cost and conveyance of all materials and labour charges, centring, mixing, curing charges but excluding cost and fabrication charges of steel for reinforcement for Side short wall upto bottom slab, side wall, top slab, Cost and fabrication charges of Steel for reinforcement including cutting, bending, cranking, tying with binding wire etc complete including contractor profit 80mm on 63mm HDPE dia pipeline

Water Supply;Supply and delivery of Single Chamber DI Air Valve of PN 1.6 rated with Body and cover in Ductile Iron of grade GGG40/SG-400/15 or GGG-50/SG-500/7 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions. All internal parts such as float, shell etc., all cover bolts, of stainless steel, and Gaskets and seals of EPDM food grade quality Epoxy powder coating (EP-P) inside and outside colour blue, drilled as per IS:1538.withSupply and delivery of DI D/F Gate Valves (Soft Seated) Resilient seated soft sealing gate valves (Sluicevalves) with body bonnet of ductile cast iron of grade GGG-40/ SG- 400/15 or GGG-50/SG-500/7 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163- 89/IS14846-2000/DIN 3202 F 4. All the valves should be with Electrostaticpowder coating both inside and outside pocket less body passage, drilled as per IS:1538, including supply of Air Tee DI A/Fto suit the main pipe and Air Valve including laying, jointing of Air Tee DI A/F, 0.6m D/F DI pipes, D/F Vertical Stem Pipe, HDPE tail pieces , MS Flanges 2nos for main pipe and Jointing materials such as bolts nuts and rubber vouchers including material cost for main line - 4nos and 'Jointing materials such as bolts nuts and rubber washers for Air valve and Isolated Gate Valve and extra stem pipe fixing includes labour charges for lowering DI pipes and tees and fixing of Air valve with isolated sluice Valve to the stem D/F DI pipe along with RCC (1:1.5:3) Footing + Stem Column Earth work excavation and depositing on bank with an initial lead of 50m and lift of 3.0m in all types of soils except hard rock requiring blasting for founadtion, PCC(1:4:8)mix using 40mm gauge hard granite metal including cost and conveyance of all materials and labour charges etc complete,RCC(1:1.5:3)prop using 20mm gauge HG crusher metal including cost and conveyance of all materials and labour charges, centring, mixing, curing charges but excluding cost and fabrication charges of steel for reinforcement for Side short wall upto bottom slab , sidewall and top slab, Cost and fabrication charges of Steel for reinforcement including cutting, bending, cranking, tying with binding wire etc complete. cutting, bending, cranking, tying with binding wire etc complete. including fabrication charges, welding including cost of material transportation labour charges including 2 coats of best quality blue colour enamail paint including fixing charges all incidental and operational charges etc complete for finished item of work,,and contractor profit.The work shall be executed based on the approved designs and drawings of the department 80mm on 250mm HDPE dia pipelines

Water Supply;Supply and delivery of Single Chamber DI Air Valve of PN 1.6 rated with Body and cover in Ductile Iron of grade GGG40/SG-400/15 or GGG-50/SG-500/7 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions. All internal parts such as float, shell etc., all cover bolts, of stainless steel, and Gaskets and seals of EPDM food grade quality Epoxy powder coating (EP-P) inside and outside colour blue, drilled as per IS:1538.withSupply and delivery of DI D/F Gate Valves (Soft Seated) Resilient seated soft sealing gate valves (Sluicevalves) with body bonnet of ductile cast iron of grade GGG-40/ SG- 400/15 or GGG-50/SG-500/7 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163- 89/IS14846-2000/DIN 3202 F 4. All the valves should be with Electrostaticpowder coating both inside and outside pocket less body passage, drilled as per IS:1538, including supply of Air Tee DI A/Fto suit the main pipe and Air Valve including laying, jointing of Air Tee DI A/F, 0.6m D/F DI pipes, D/F Vertical Stem Pipe, HDPE tail pieces , MS Flanges 2nos for main pipe and Jointing materials such as bolts nuts and rubber vouchers including material cost for main line - 4nos and 'Jointing materials such as bolts nuts and rubber washers for Air valve and Isolated Gate Valve and extra stem pipe fixing includes labour charges for lowering DI pipes and tees and fixing of Air valve with isolated sluice Valve to the stem D/F DI pipe along with RCC (1:1.5:3) Footing + Stem Column Earth work excavation and depositing on bank with an initial lead of 50m and lift of 3.0m in all types of soils except hard rock requiring blasting for founadtion, PCC(1:4:8)mix using 40mm gauge hard granite metal including cost and conveyance of all materials and labour charges etc complete,RCC(1:1.5:3)prop using 20mm gauge HG crusher metal including cost and conveyance of all materials and labour charges, centring, mixing, curing charges but excluding cost and fabrication charges of steel for reinforcement for Side short wall upto bottom slab , sidewall and top slab, Cost and fabrication charges of Steel for reinforcement including cutting, bending, cranking, tying with binding wire etc complete. cutting, bending, cranking, tying with binding wire etc complete. including fabrication charges, welding including cost of material transportation labour charges including 2 coats of best quality blue colour enamail paint including fixing charges all incidental and operational charges etc complete for finished item of work,,and contractor profit.The work shall be executed based on the approved designs and drawings of the department o. 50mm on 100mm DI dia pipelines

Water Supply;Supply and delivery of Single Chamber DI Air Valve of PN 1.6 rated with Body and cover in Ductile Iron of grade GGG40/SG-400/15 or GGG-50/SG-500/7 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions. All internal parts such as float, shell etc., all cover bolts, of stainless steel, and Gaskets and seals of EPDM food grade quality Epoxy powder coating (EP-P) inside and outside colour blue, drilled as per IS:1538.withSupply and delivery of DI D/F Gate Valves (Soft Seated) Resilient seated soft sealing gate valves (Sluicevalves) with body bonnet of ductile cast iron of grade GGG-40/ SG- 400/15 or GGG-50/SG-500/7 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163- 89/IS14846-2000/DIN 3202 F 4. All the valves should be with Electrostaticpowder coating both inside and outside pocket less body passage, drilled as per IS:1538, including supply of Air Tee DI A/Fto suit the main pipe and Air Valve including laying, jointing of Air Tee DI A/F, 0.6m D/F DI pipes, D/F Vertical Stem Pipe, HDPE tail pieces , MS Flanges 2nos for main pipe and Jointing materials such as bolts nuts and rubber vouchers including material cost for main line - 4nos and 'Jointing materials such as bolts nuts and rubber washers for Air valve and Isolated Gate Valve and extra stem pipe fixing includes labour charges for lowering DI pipes and tees and fixing of Air valve with isolated sluice Valve to the stem D/F DI pipe along with RCC (1:1.5:3) Footing + Stem Column Earth work excavation and depositing on bank with an initial lead of 50m and lift of 3.0m in all types of soils except hard rock requiring blasting for founadtion, PCC(1:4:8)mix using 40mm gauge hard granite metal including cost and conveyance of all materials and labour charges etc complete,RCC(1:1.5:3)prop using 20mm gauge HG crusher metal including cost and conveyance of all materials and labour charges, centring, mixing, curing charges but excluding cost and fabrication charges of steel for reinforcement for Side short wall upto bottom slab , sidewall and top slab, Cost and fabrication charges of Steel for reinforcement including cutting, bending, cranking, tying with binding wire etc complete. cutting, bending, cranking, tying with binding wire etc complete. including fabrication charges, welding including cost of material transportation labour charges including 2 coats of best quality blue colour enamail paint including fixing charges all incidental and operational charges etc complete for finished item of work,,and contractor profit.The work shall be executed based on the approved designs and drawings of the department o 50mm on 90mm HDPE dia pipelines

Water Supply;Supply and delivery of Single Chamber DI Air Valve of PN 1.6 rated with Body and cover in Ductile Iron of grade GGG40/SG-400/15 or GGG-50/SG-500/7 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions. All internal parts such as float, shell etc., all cover bolts, of stainless steel, and Gaskets and seals of EPDM food grade quality Epoxy powder coating (EP-P) inside and outside colour blue, drilled as per IS:1538.withSupply and delivery of DI D/F Gate Valves (Soft Seated) Resilient seated soft sealing gate valves (Sluicevalves) with body bonnet of ductile cast iron of grade GGG-40/ SG- 400/15 or GGG-50/SG-500/7 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163- 89/IS14846-2000/DIN 3202 F 4. All the valves should be with Electrostaticpowder coating both inside and outside pocket less body passage, drilled as per IS:1538, including supply of Air Tee DI A/Fto suit the main pipe and Air Valve including laying, jointing of Air Tee DI A/F, 0.6m D/F DI pipes, D/F Vertical Stem Pipe, HDPE tail pieces , MS Flanges 2nos for main pipe and Jointing materials such as bolts nuts and rubber vouchers including material cost for main line - 4nos and 'Jointing materials such as bolts nuts and rubber washers for Air valve and Isolated Gate Valve and extra stem pipe fixing includes labour charges for lowering DI pipes and tees and fixing of Air valve with isolated sluice Valve to the stem D/F DI pipe along with RCC (1:1.5:3) Footing + Stem Column Earth work excavation and depositing on bank with an initial lead of 50m and lift of 3.0m in all types of soils except hard rock requiring blasting for founadtion, PCC(1:4:8)mix using 40mm gauge hard granite metal including cost and conveyance of all materials and labour charges etc complete,RCC(1:1.5:3)prop using 20mm gauge HG crusher metal including cost and conveyance of all materials and labour charges, centring, mixing, curing charges but excluding cost and fabrication charges of steel for reinforcement for Side short wall upto bottom slab , sidewall and top slab, Cost and fabrication charges of Steel for reinforcement including cutting, bending, cranking, tying with binding wire etc complete. cutting, bending, cranking, tying with binding wire etc complete. including fabrication charges, welding including cost of material transportation labour charges including 2 coats of best quality blue colour enamail paint including fixing charges all incidental and operational charges etc complete for finished item of work,,and contractor profit.The work shall be executed based on the approved designs and drawings of the department o 50mm on 75mm HDPE dia pipelines

Water Supply;Supply and delivery of Single Chamber DI Air Valve of PN 1.6 rated with Body and cover in Ductile Iron of grade GGG40/SG-400/15 or GGG-50/SG-500/7 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions. All internal parts such as float, shell etc., all cover bolts, of stainless steel, and Gaskets and seals of EPDM food grade quality Epoxy powder coating (EP-P) inside and outside colour blue, drilled as per IS:1538.withSupply and delivery of DI D/F Gate Valves (Soft Seated) Resilient seated soft sealing gate valves (Sluicevalves) with body bonnet of ductile cast iron of grade GGG-40/ SG- 400/15 or GGG-50/SG-500/7 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163- 89/IS14846-2000/DIN 3202 F 4. All the valves should be with Electrostaticpowder coating both inside and outside pocket less body passage, drilled as per IS:1538, including supply of Air Tee DI A/Fto suit the main pipe and Air Valve including laying, jointing of Air Tee DI A/F, 0.6m D/F DI pipes, D/F Vertical Stem Pipe, HDPE tail pieces , MS Flanges 2nos for main pipe and Jointing materials such as bolts nuts and rubber vouchers including material cost for main line - 4nos and 'Jointing materials such as bolts nuts and rubber washers for Air valve and Isolated Gate Valve and extra stem pipe fixing includes labour charges for lowering DI pipes and tees and fixing of Air valve with isolated sluice Valve to the stem D/F DI pipe along with RCC (1:1.5:3) Footing + Stem Column Earth work excavation and depositing on bank with an initial lead of 50m and lift of 3.0m in all types of soils except hard rock requiring blasting for founadtion, PCC(1:4:8)mix using 40mm gauge hard granite metal including cost and conveyance of all materials and labour charges etc complete,RCC(1:1.5:3)prop using 20mm gauge HG crusher metal including cost and conveyance of all materials and labour charges, centring, mixing, curing charges but excluding cost and fabrication charges of steel for reinforcement for Side short wall upto bottom slab , sidewall and top slab, Cost and fabrication charges of Steel for reinforcement including cutting, bending, cranking, tying with binding wire etc complete. cutting, bending, cranking, tying with binding wire etc complete. including fabrication charges, welding including cost of material transportation labour charges including 2 coats of best quality blue colour enamail paint including fixing charges all incidental and operational charges etc complete for finished item of work,,and contractor profit.The work shall be executed based on the approved designs and drawings of the department o 50mm on 63mm HDPE dia pipelines

Water Supply;Construction of pipelines for water supply with HDPE PE-100 grade 250mm dia 6 kg/cm2 pipes as per IS 4984:1995 with its amendments and revisions thereon and including supplying of pipes,necessary specials such as bends, Tees, etc as per site requirements, lowering, laying and jointing of pipes (with butt fusion welding) true to alignment and gradient, excavation of Pipeline trench (Earthwork excavation in all soils upto SDR using machine rate for 2/3rd and manual rate for 1/3rd of quantity) of pipelines in all soils except rock requiring blasting and refilling trenches with excavated earth (other than rocky soils, boulders and BC Soils) with watering and tamping and removing surplus earth from site of work and filling pipeline with water and testing to the required pressure etc., completely. The rates are inclusive of cost and conveyance of all materials and labour charges and all incidental and operational charges for finished item of pipeline work, the rate is including contractor profit. The work shall be executed based on the approved designs and drawings of the department.

Water Supply;Construction of pipelines for water supply with HDPE PE-100 grade 90mm dia 6 kg/cm2 pipes as per IS 4984:1995 with its amendments and revisions thereon and including supplying of pipes,necessary specials such as bends, Tees, etc as per site requirements, lowering, laying and jointing of pipes (with butt fusion welding) true to alignment and gradient, excavation of Pipeline trench (Earthwork excavation in all soils upto SDR using machine rate for 2/3rd and manual rate for 1/3rd of quantity) of pipelines in all soils except rock requiring blasting and refilling trenches with excavated earth (other than rocky soils, boulders and BC Soils) with watering and tamping and removing surplus earth from site of work and filling pipeline with water and testing to the required pressure etc., completely. The rates are inclusive of cost and conveyance of all materials and labour charges and all incidental and operational charges for finished item of pipeline work, the rate is including contractor [profit. The work shall be executed based on the approved designs and drawings of the department.

Water Supply;Construction of pipelines for water supply with HDPE PE-100 grade pipes 75mm 8 kg/cm2 as per IS 4984:1995 with its amendments and revisions thereon and including supplying of pipes,necessary specials such as bends, Tees, etc as per site requirements, lowering, laying and jointing of pipes (with butt fusion welding) true to alignment and gradient, excavation of Pipeline trench (Earthwork excavation in all soils upto SDR using machine rate for 2/3rd and manual rate for 1/3rd of quantity) of pipelines in all soils except rock requiring blasting and refilling trenches with excavated earth (other than rocky soils, boulders and BC Soils) with watering and tamping and removing surplus earth from site of work and filling pipeline with water and testing to the required pressure etc., complete., The rates are inclusive of cost and conveyance of all materials and labour charges and all incidental and operational charges for finished item of pipeline work, the rate is including contractor profit. The work shall be executed based on the approved designs and drawings of the department.

Water Supply;Construction of pipelines for water supply with HDPE PE-100 grade 75mm dia 6 kg/cm2 pipes as per IS 4984:1995 with its amendments and revisions thereon and including supplying of pipes,necessary specials such as bends, Tees, etc as per site requirements, lowering, laying and jointing of pipes (with butt fusion welding) true to alignment and gradient, excavation of Pipeline trench (Earthwork excavation in all soils upto SDR using machine rate for 2/3rd and manual rate for 1/3rd of quantity) of pipelines in all soils except rock requiring blasting and refilling trenches with excavated earth (other than rocky soils, boulders and BC Soils) with watering and tamping and removing surplus earth from site of work and filling pipeline with water and testing to the required pressure etc., completely. The rates are inclusive of cost and conveyance of all materials and labour charges and all incidental and operational charges for finished item of pipeline work, the rate is including contractor profit. The work shall be executed based on the approved designs and drawings of the department.

Water Supply;Construction of pipelines for water supply with HDPE PE-100 grade 63mm dia 10 kg/cm2 pipes as per IS 4984:1995 with its amendments and revisions thereon and including supplying of pipes,necessary specials such as bends, Tees, etc as per site requirements, lowering, laying and jointing of pipes (with butt fusion welding) true to alignment and gradient, excavation of Pipeline trench (Earthwork excavation in all soils upto SDR using machine rate for 2/3rd and manual rate for 1/3rd of quantity) of pipelines in all soils except rock requiring blasting and refilling trenches with excavated earth (other than rocky soils, boulders and BC Soils) with watering and tamping and removing surplus earth from site of work and filling pipeline with water and testing to the required pressure etc., completely. The rates are inclusive of cost and conveyance of all materials and labour charges and all incidental and operational charges for finished item of pipeline work, the rate is including contractor profit. The work shall be executed based on the approved designs and drawings of the department.

Water Supply;Construction of pipelines for water supply with HDPE PE-100 grade pipes 63mm 8 kg/cm2 as per IS 4984:1995 with its amendments and revisions thereon and including supplying of pipes,necessary specials such as bends, Tees, etc as per site requirements, lowering, laying and jointing of pipes (with butt fusion welding) true to alignment and gradient, excavation of Pipeline trench (Earthwork excavation in all soils upto SDR using machine rate for 2/3rd and manual rate for 1/3rd of quantity) of pipelines in all soils except rock requiring blasting and refilling trenches with excavated earth (other than rocky soils, boulders and BC Soils) with watering and tamping and removing surplus earth from site of work and filling pipeline with water and testing to the required pressure etc., complete., The rates are inclusive of cost and conveyance of all materials and labour charges and all incidental and operational charges for finished item of pipeline work, the rate is including contractor profit. The work shall be executed based on the approved designs and drawings of the department.

Water Supply;Construction of pipelines for water supply with HDPE PE-100 grade 63mm dia 6 kg/cm2 pipes as per IS 4984:1995 with its amendments and revisions thereon and including supplying of pipes,necessary specials such as bends, Tees, etc as per site requirements, lowering, laying and jointing of pipes (with butt fusion welding) true to alignment and gradient, excavation of Pipeline trench (Earthwork excavation in all soils upto SDR using machine rate for 2/3rd and manual rate for 1/3rd of quantity) of pipelines in all soils except rock requiring blasting and refilling trenches with excavated earth (other than rocky soils, boulders and BC Soils) with watering and tamping and removing surplus earth from site of work and filling pipeline with water and testing to the required pressure etc., completely. The rates are inclusive of cost and conveyance of all materials and labour charges and all incidental and operational charges for finished item of pipeline work, the rate is including contractor profit. The work shall be executed based on the approved designs and drawings of the department.

Water Supply;Construction of pipelines for water supply with 100 mm dia DI - K9 centrifugally cast (spun) Ductile Iron S/S pipes with cement mortar lining inside the pipe as per IS 8329:2000 with its amendments and revisions thereon and with rubber gaskets as per IS:4179, including supply of pipes and rubber gaskets, Tyton joints as per IS:13382-1992 and DI specials as per site requirements, lowering, laying and jointing of pipes true to alignment and gradient, excavation of Pipeline trench (Earthwork excavation in all soils upto SDR using machine rate for 2/3rd and manual rate for 1/3rd of quantity) of pipelines in all soils except rock requiring blasting and refilling trenches with excavated earth (other than rocky soils, boulders and BC Soils) with watering and tamping and removing surplus earth from site of work and filling pipeline with water and testing to the required pressure etc., complete., The rates are inclusive of cost and conveyance of all materials and labour charges and all incidental and operational charges for finished item of pipeline work, and the rate is including contractor profit.The work shall be executed based on the approved designs and drawings of the department.