Military Engineer Services Tender

All as per item No.03 above but applying subsequent coats.

M&L Preparation of old painted steel and Iron surfaces of any description,over 10 cm in width or girth,not otherwise described and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L Preparation of old wood and wood based surfaces of any description,over 10 cm in width or girth,not otherwise described and applyingapplying one coat of synthetic enamel paint all as specified and directed.

M&L Preparation of old plastered or unplastered surfaces of walls and applying one coat of cement base paint complete all as specified and as directed.

M&L Preparation of old plastered or unplastered surfaces of walls and applying two coats of cement base paint complete all as specified and as directed.

M&L Rendering 15 mm thick CM (1:4) on brick or concrete surfaces finishing the surfaces even and smooth without using extra cement complete all as specified and as directed.

M&L Brick work using old size Fly ash bricks, straight or curved on plan exc 6m mean radius built in CM (1:6) including demolition of existing brick work complete all as specified and as directed.

M&L Vitrified tiles 10 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles including 15mm thick screed bed or bedding layer in CM (1:4) including demolition of existing tiles complete all as specified and as directed.

M&L Nnon-skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles including 15mm thick screed bed or bedding layer in CM 1:4 and demolition of existing tiles complete all as specified and as directed.

S&F 12 mm thickness toughened glass factory made frosted with as in door/ wall partition including providing and fixing of top & bottom pivot & spring type fixing arrangements & necessary holes & making good & required hinges,SS 304 grade handles,door/floor spring etc and including all necesaary fittings complete all as specified.

Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) including removing debris beyond the premises complete all as specified and as directed.

M&L Providing PCC (1:2:4) type B0, (using 12.5 mm graded stone aggregate), as in sub base for floor, finished even and rough complete all as specified and directed.

M& L Screed bed or bedding layer of 15 mm thick CM (1:6) complete all as specified and as directed.

M&L Chequered cement concrete tiles of size 300mm x 300mmx 25mm thick, set jointed and pointed in cement slurry as in floors with grey cement and pigments complete all as specified and as directed.

Fixing Only Ceiling Mounted Easy Dry Cloth Stand,assembling and installation with the required accessories complete all as directed by Eng-in-charge. Note: The ceiling monted easy dry cloth stand along with required accessorie will be issued by AGE B/R No.2 and the same shall be collected by the tenderer before installation at site as directed by Eng-in-charge.

M&L Complete removal of existing water proofing treatment of any thickness and cement mortar screed in existing roof including scrapping out old treatment/ bitumen etc. The roof surface shall be thoroughly wire brushed, cleaned to eliminate all sharp projections, washed, dried up and cleaned of all foreign material and dust to receive new water proofing treatment and removal of rubbish off the premises to a distance exc. 500m and not exc 1.5 Km complete all as directed.

Demolition of cement concrete of any description and in any position not therwise specifically provided for including removing debris beyond the premises complete all as specified and as directed.

M&L Providing PCC (1:2:4) type B-0 (using 12.5 mm graded broken stone aggregate) as in leveling course on roof slab including finishing the surface of concrete even and fair to receive screed complete all as specified and as directed.

M&L Providing Water proofing treatment to RCC roof slab with the following specifications below including testing,complete all as specified and as directed by Engineer-in-Charge :- (a) 10mm thick rendering in CM (1:3) on roof slab mixed with and including integral water proofing compound @ 3% by weight of cement and finished even and fair. (b) On the dried plastered surface, Apply one coat of approved bituminous primer @ 0.25 Kg/Sqm. (c) On this primered surface, APP modified bituminous memberance 3mm thick with non woven polyster mat as reinforcement weighing not less than 3.50 Kg/sqm with plain finish shall be laid by torch application method. (d) Apply a coat of bituminous aluminium paint @ 0.15 Kg/Sqm. (e) The overlap while torching shall be at least 100mm at the longitudinal edges and 150mm at the ends. (f) The entire treatment shall be carried as per manufacturer instructions through authorised applicator as approved by Eng-in-charge.