Military Engineer Services Tender
For getting the details of etenders, if you are looking for information about them from the cumbersome government websites but are tired of doing so, Bidassist comes up with a one stop solution. It collates every Eproc telangana tender on Bidassist. One can approach it for the bidding process, registration process, etc., are explained below.
Costs
EMD
₹ 90,000Document Cost
₹ 500Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_MES_694532_1Tender No
GE(U)/SEC/TOKEN-38 OF 2024-2025Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
REPAIR / RECTIFICATION OF DAY TO DAY COMPLAINTS OF EXTERNAL WATER SUPPLY SYSTEM INCLUDING REPAIR / REPLACEMENT OF CI / DI / GI / PPR PIPELINE NETWORK, SLUICE VALVES, VALVE PIT CHAMBERS AND CONNECTED WORKS AT MH, STN WKSP, GOLDEN PALM AND MISCELLANEOUS RE
REPAIR / RECTIFICATION OF DAY TO DAY COMPLAINTS OF EXTERNAL WATER SUPPLY SYSTEM INCLUDING REPAIR / REPLACEMENT OF CI / DI / GI / PP-R PIPELINE NETWORK, SLUICE VALVES, VALVE PIT CHAMBERS AND CONNECTED WORKS AT MH, STN WKSP, GOLDEN PALM AND MISCELLANEOUS RE
REPAIR / RECTIFICATION OF DAY TO DAY COMPLAINTS OF EXTERNAL WATER SUPPLY SYSTEM INCLUDING REPAIR / REPLACEMENT OF CI / DI / GI / PP-R PIPELINE NETWORK, SLUICE VALVES, VALVE PIT CHAMBERS AND CONNECTED WORKS AT MH, STN WKSP, GOLDEN PALM AND MISCELLANEOUS RE
BOQ Items
... More
Attending routine complaints of external water supply including rectification of minor defects by taking down of existing GI / PPR tubing up to 25 mm bore, cutting / threading and making joints and cleaning for any blockages, opening of float valve of service tanks, cleaning and fixing the same in its position, replacement of jumper valve / packing sheet of gate valve and including replacement of GI unions / sockets / nipples etc as required at site complete all as specified and directed.
80
-
-
... More
All as per item No 4.00 above but for GI tubing 40 mm bore to 50 mm bore.
80
-
-
... More
Attending complaints of BLOCKAGE OF WATER PIPE LINES / NO WATER SUPPLY at anykind of ACCOMODATION (MARRIED / OTM / single / multi story building ) , IDENTIFY THE FAULTS including rectification by taking down of existing GI / PPR tubing up to 80 mm bore, cutting / threading and making joints and cleaning for any blockages, opening of float valve of service tanks, cleaning and fixing the same in its position, replacement of valve / packing sheet of gate valve and including replacement of GI unions / sockets / nipples etc as required at site TO RESTORE WATER SUPPLY complete all as specified and directed.
4
-
-
... More
Notes for Sl item No 1 to 6 :-
(a) The contractor will be allotted complaints at MES complaint cell on requirement basis on all working days including Sundays and holidays and sufficient tradesman / resources will be deployed by him / her for completion of day to day complaints within 12 hours from the time of reporting. Any delay beyond above mentioned time limit without intimation of genuine cause, penalties will be recovered twice of the quoted rate for each un-attended complaint. (b) A detailed log book of complaints with completion / non-completion remarks from users / MES will be maintained by the contractor and the same will be updated on daily basis in consultation with JE E&M / Engr-in-Charge. (c) The contractor will make suitable arrangement for emergency complaints and will notify authorised representative / Engr-in-Charge about extraordinary circumstances for probable non-completion or delay in rectification of complaints beyond stated time limit set for disposal of complaint. In case of any dispute the decision of accepting officer will be final and binding in this regard.
-
-
-
... More
Rectification of leakages in pumping / delivery lines (CI / DI / PPR / MS) of size 80 mm to 100 mm at Military area / Military Roads / civil Roads / PWD Roads / Cantt board roads by taking necessary permission from respective authorities by excavating PCC / RCC / pavement / soft & hard soil / rock of any depth by using necessary T&P (Excavator / hammer drill) as per the requirement, De-watering from the trenches by using pump sets, rectification of leakages, fixing of CI / DI specials such as collars, bends / tail pieces, any type of gasket, welding work etc as required to arrest the leakages completely and making joints, filling the trenches, site clearances and PCC at the top portion as required complete all as specified and as directed.
2
-
-
... More
Rectification of leakages in pumping / delivery lines (MS / CI / DI / PPR) of size 150 mm to 400 mm at Military area / Military Roads / civil Roads / PWD Roads / Cantt board roads by taking necessary permission from respective authorities by excavating PCC / RCC / pavement / soft & hard soil / rock of any depth by using necessary T&P (Excavator / hammer drill) as per the requirement, De-watering from the trenches by using pump sets, rectification of leakages, fixing of CI / DI specials such as collars, bends / tail pieces, any type of gasket, welding work etc as required to arrest the leakages completely and making joints, filling the trenches, site clearances and PCC at the top portion as required complete all as specified and as directed.
2
-
-
... More
M&L for attending break down of water supply pipe line at Military area / Military Roads / civil Roads / PWD Roads / Cantt board roads and repair s to CI / DI / PPR / MS water mains of size 80 mm to 400 mm bore at a given notice including necessary excavation in mud, in any type of soil, PCC,RCC, hard rock etc by manual or using special T&P such as JCB etc. De-watering from the trenches by using pump sets, rectification of leakages, fixing of CI specials such as collars, bends / tail pieces etc and making joints complete all as specified and as directed including making good of disturbed surfaces.
2
-
-
... More
Note for item No 7.00 to 9.00:-
(i) CI specials, D-Joints, Clamp joints, DI / CI Pipe etc shall be measured and paid under respective items of sch 'A'. (ii) Excavation and PCC will be measured and paid separately under relevant items.
(iii) Rate of any kind of gasket and Lead joint, necessary barrication for safety of worker etc as required, deemed to be included in the quoted rate.
(iv) rate of any kind of gasket and necessary barrication for safety of worker etc as required, deemed to be included in the quoted rate.
(v) The contractor is responsible for obtaining the approval from Police Department for Traffic Diversion and related works if required in consultation with the MES department if required.
(v) Contractor is responsible for repair / replacement of any damages to the existing structures, Under Ground HT / LT / OFC Cables etc during the course of execution. (vi) In case of any kind of breakdown contractor should be intimated over Telephone and contractor should attend the complaints with minimum reaction time.
-
-
-
... More
Excavation in trenches not exceeding 1.5 m width and not exc 1.5 m in depth and getting out in hard / dense soil for removing / laying of pipe line, for foundation of PCC / Steel pole, laying of cable in trenches etc complete all as specified and directed.
370
-
-
... More
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in any type of soil complete all as specified and directed.
242.5
-
-
... More
Removing excavated material (soils) n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.
67.5
-
-
... More
Taking up or down steel tubing and connections, including cleaning the pipes free from scaling for re-fixing or removal complete with all fittings and connections of the following sizes :-
-
-
-
... More
15 mm dia
150
-
-
... More
20 mm dia
300
-
-
... More
25 mm dia
300
-
-
... More
40 mm dia
210
-
-
... More
50 mm dia
160
-
-
... More
80 mm dia
90
-
-
... More
Refixing of old steel tubing and connection in new or old position including cutting threads if required, fittings with old / new bends, elbows, socket, nipple, tapers, and reducers etc as per site requirement and laid in trenches and testing for leakages complete all as specified and directed for the following sizes:-
Notes for item No 14.01 to 14.07 :- (a) Excavation and Earth work shall be measured and paid separately.
-
-
-
... More
15 mm dia
30
-
-
... More
20 mm dia
50
-
-
... More
25 mm dia
50
-
-
... More
40 mm dia
50
-
-
... More
50 mm dia
50
-
-
... More
80 mm dia
50
-
-
... More
Refixing of old steel tubing and connection in new or old position including, cutting threads if required, fittings with old / new bends, elbows, socket, nipple, tapers, and reducers etc as per site requirement and laid in floors, walls and ceilings and testing for leakages complete all as specified and directed for the following sizes:-
-
-
-
... More
15 mm dia
20
-
-
... More
20 mm dia
50
-
-
... More
25 mm dia
50
-
-
... More
40 mm dia
20
-
-
... More
50 mm dia
20
-
-
... More
Supply and laying steel water tubing medium grade, galvanised with all fitting, laid in trenches and testing for leakages complete all as specified and directed for the following sizes:-
Notes for item No 16.01 to 16.07 :- (a) Excavation and Earth work shall be measured and paid separately.
-
-
-
... More
15 mm dia
50
-
-
... More
20 mm dia
100
-
-
... More
25 mm dia
100
-
-
... More
40 mm dia
100
-
-
... More
50 mm dia
50
-
-
... More
80 mm dia
40
-
-
... More
Supply and laying steel water tubing medium grade, galvanised with all fitting, fixed to wall and ceilings or laid in floor and testing for leakages complete all as specified and directed for the following sizes:-
-
-
-
... More
15 mm dia
50
-
-
... More
20 mm dia
100
-
-
... More
25 mm dia
100
-
-
... More
40 mm dia
40
-
-
... More
50 mm dia
40
-
-
... More
Taking up or down PPR pipe and connections, including cleaning the pipes free from scaling for re-fixing or removal complete with all fittings and connections of the following sizes :-
-
-
-
... More
32 mm dia
50
-
-
... More
63 mm dia
50
-
-
... More
Refixing of old PPR Pipe and connection in new or old position including fittings with old / new bends, elbows, socket, nipple, tapers, and reducers etc as per site requirement and laid in trenches and testing for leakages complete all as specified and directed for the following sizes:-
Notes for item No 19.01 to 19.03 :- (a) Excavation and Earth work shall be measured and paid separately.
-
-
-
... More
32 mm dia
4
-
-
... More
63 mm dia
4
-
-
... More
Refixing of old PPR Pipe and connection in new or old position including fittings with old / new bends, elbows, socket, nipple, tapers, and reducers etc as per site requirement and laid in floors, walls and ceilings and testing for leakages complete all as specified and directed for the following sizes:-
-
-
-
... More
32 mm dia
4
-
-
... More
63 mm dia
4
-
-
... More
Supply, laying and testing of polypropylene random copolymer (PP-R) (PN-10-SDR-11) 3 layer pipes ISI marked as per IS-15801, UV stabilized and anti microbial fusion welded having thermal stability for hot and cold water supply all PPR plain and brass thread polypropylene random fittings laid in trenches of following sizes including all fittings.
Notes for item No 21.01 to 21.03 :- (a) Excavation and Earth work shall be measured and paid separately.
-
-
-
... More
32 mm dia
4
-
-
... More
63 mm dia
4
-
-
... More
Supply, laying and testing of polypropylene random copolymer (PP-R) (PN-10-SDR-11) 3 layer pipes ISI marked as per IS-15801, UV stabilized and anti microbial fusion welded having thermal stability for hot and cold water supply all PPR plain and brass thread polypropylene random fittings fixed complete to walls, ceilings or in floors etc of following sizes including all fittings.
-
-
-
... More
32 mm dia
20
-
-
... More
63 mm dia
20
-
-
... More
Taking up unserviceable / defective CI / DI / MS / PPR water mains (including all fitting ) with spigot / socketed / flanged ends including disconnecting pipes and fittings in any position complete all as specified and directed for the following sizes:-
-
-
-
... More
80 mm Dia
50
-
-
... More
100 mm Dia
50
-
-
... More
150 mm Dia
100
-
-
... More
200 mm Dia
50
-
-
... More
250 mm Dia
25
-
-
... More
300 mm Dia
61
-
-
... More
Refixing of old CI / DI / MS Pipe and connection in new or old position including fittings with old / new bends, elbows, socket, nipple, tapers, and reducers etc as per site requirement and laid in trenches and testing for leakages complete all as specified and directed for the following sizes:-
-
-
-
... More
80 mm dia
50
-
-
... More
100 mm dia
50
-
-
... More
150 mm dia
25
-
-
... More
200 mm dia
25
-
-
... More
250 mm dia
50
-
-
... More
300 mm dia
Notes for item No 24.01 to 24.05 :- (a) Excavation and Earth work shall be measured and paid separately.
50
-
-
... More
S&F ductile iron pressure pipes, class K7, centrifugally cast with spigot and socket ends as per following conforming to IS 8329 / 2000 with cement mortar lining inside the pipes with outside zinc coating suitable for push-on-joint (rubber gasket D jointing) in any length including DI specials as required at site confirming to IS 8329 / 2000 and all jointing materials and making good for disturbed surfaces of roads, path ways etc while laying the pipe line at site, site clearance for the route of pipe line, welding, cutting the existing CI / DI / MS pipe line of any size up to 400 mm dia for inserting branch connections etc complete all as specified and directed for the following sizes:- Notes:- (a) Quoted rates inclusive of Push on Joints / D-Joints as required (b) The contractor is responsible for obtaining the approval from Police Department for Traffic Diversion and related works if required in consultation with the MES department if required.
(c) Contractor is responsible for repair / replacement of any damages to the existing structures, Under Ground HT / LT / OFC Cables etc during the course of execution. (d) Excavation and Earth work shall be measured and paid separately.
-
-
-
... More
100 mm Dia
12
-
-
... More
150 mm Dia
12
-
-
... More
200 mm Dia
6
-
-
... More
Cutting existing CI pipe line for insertion of new tees, collars for branch connections complete all as specified and directed for the following sizes:- Note: CI / DI specials, Joints and Earth work shall be measured and paid separately under relevant items of this schedule.
-
-
-
... More
80 mm Dia
2
-
-
... More
100 mm Dia
2
-
-
... More
150 mm Dia
2
-
-
... More
200 mm Dia
2
-
-
... More
300 mm Dia
2
-
-
... More
Supply only GI fittings 15 mm bore, medium grade, ISI marked, smooth finished and make embossed on fittings complete all as specified and directed for the following fittings:-
-
-
-
... More
Union
25
-
-
... More
All equal Tee
5
-
-
... More
Socket
25
-
-
... More
Nipple 75mm Long
50
-
-
... More
Nipple 100mm Long
50
-
-
... More
Nipple 150mm Long
50
-
-
... More
Plug
5
-
-
... More
Elbow
10
-
-
... More
Hex Nipple
4
-
-
... More
All as per item No 27.00 above but for 20 mm bore.
-
-
-
... More
Union
20
-
-
... More
All equal Tee
5
-
-
... More
Reducer Tee 20 x 20 x 15 mm
10
-
-
... More
Socket
15
-
-
... More
Reducer Socket 20 x 15 mm
15
-
-
... More
Nipple 75mm Long
35
-
-
... More
Nipple 100mm Long
50
-
-
... More
Nipple 150mm Long
50
-
-
... More
Plug
5
-
-
... More
Reducer Elbow 20 x 15 mm
10
-
-
... More
Elbow
10
-
-
... More
Hex Nipple
2
-
-
... More
All as per item No 27.00 above but for 25 mm bore.
-
-
-
... More
Union
50
-
-
... More
All equal Tee
15
-
-
... More
Socket
15
-
-
... More
Reducer Socket 25 x 20 mm
15
-
-
... More
Reducer Socket 25 x 15 mm
15
-
-
... More
Nipple 75mm Long
50
-
-
... More
Nipple 100mm Long
25
-
-
... More
Nipple 150mm Long
25
-
-
... More
Elbow
25
-
-
... More
Reducer Elbow 25 x 20 mm
10
-
-
... More
Reducer Elbow 25 x 15 mm
10
-
-
... More
Plug
10
-
-
... More
Reducer tee 25mm x 25 mm x 20mm
5
-
-
... More
Reducer tee 25mm x 25 mm x 15mm
5
-
-
... More
Hex Nipple
5
-
-
... More
All as per item No 27.00 above but for 40 mm bore.
-
-
-
... More
Union
10
-
-
... More
All equal Tee
5
-
-
... More
Socket
5
-
-
... More
Reducer Socket 40mm x 25 mm
5
-
-
... More
Nipple 75mm Long
5
-
-
... More
Nipple 100mm Long
5
-
-
... More
Nipple 150mm Long
5
-
-
... More
Elbow
5
-
-
... More
Plug
2
-
-
... More
Reducer elbow 40mm x 25mm
2
-
-
... More
Reducer tee 40mm x 40mm x 25mm
2
-
-
... More
Reducer tee 40mm x 40mm x 20mm
2
-
-
... More
Hex Nipple
2
-
-
... More
Reducer Socket 40mm x 20 mm
2
-
-
... More
Reducer elbow 40mm x 20mm
2
-
-
... More
All as per item No 27.00 above but for 50 mm bore.
-
-
-
... More
Union
3
-
-
... More
All equal Tee
5
-
-
... More
Socket
10
-
-
... More
Nipple 75mm Long
10
-
-
... More
Nipple 100mm Long
10
-
-
... More
Nipple 150mm Long
3
-
-
... More
Reducer Socket 50mm x 40mm.
3
-
-
... More
Reducer Socket 50mm x 25mm.
3
-
-
... More
Plug
5
-
-
... More
Elbow
3
-
-
... More
Reducer elbow 50mm x 40mm
3
-
-
... More
Reducer elbow 50mm x 25mm
2
-
-
... More
Reducer tee 50mm x 50 mm x 40mm
2
-
-
... More
Reducer tee 50mm x 50 mm x 25mm
2
-
-
... More
Reducer tee 50mm x 50 mm x 20mm
2
-
-
... More
Hex Nipple
2
-
-
... More
All as per item No 27.00 above but for 80 mm bore.
-
-
-
... More
Union
1
-
-
... More
All equal Tee
1
-
-
... More
Socket
1
-
-
... More
Reducer Socket 80mm x 50mm.
1
-
-
... More
Reducer Socket 80mm x 40mm.
1
-
-
... More
Nipple 75mm Long
1
-
-
... More
Nipple 100mm Long
1
-
-
... More
Nipple 150mm Long
1
-
-
... More
Elbow
1
-
-
... More
Reducer elbow 80mm x 50mm
1
-
-
... More
Reducer elbow 80mm x 40mm
1
-
-
... More
Reducer tee 80mm x 80mm x 50mm
1
-
-
... More
Reducer tee 80mm x 80mm x 40mm
1
-
-
... More
Hex Nipple
1
-
-
... More
Supply and fix in replacement of unserviceable Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipes and fixed complete all as specified and directed for the following sizes:-
-
-
-
... More
15mm dia bore
20
-
-
... More
20mm dia bore
20
-
-
... More
25mm dia bore
20
-
-
... More
40mm dia bore
15
-
-
... More
50mm dia bore
15
-
-
... More
80 mm dia bore.
2
-
-
... More
Supply and fix in replacement of unserviceable ball brass valves, high pressure with polythene float and flynut alongwith socket / reducer of suitable size, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed for the following sizes:-
-
-
-
... More
20mm dia bore
80
-
-
... More
25mm dia bore
80
-
-
... More
M&L for Arresting leakages of sluice valves by replacing Gland packing, gland bush, gland flange, nutbolts, gasket, packing material as required after dismantling in existing position including testing on completion complete all as specified and directed for the following sizes:-
Note: Quoted rates inclusive of the materials mentioned above like Gland packing, gland bush, gland flange, nutbolts, gasket, packing material etc as required to arrest the leakages.
-
-
-
... More
80 mm Dia
2
-
-
... More
100 mm Dia
2
-
-
... More
150 mm Dia
2
-
-
... More
200 mm Dia
2
-
-
... More
250 mm Dia
1
-
-
... More
300 mm Dia
2
-
-
... More
400 mm Dia
1
-
-
... More
S&F CI / DI specials such as bends (any type, radius or angle) tapers any type (Straight, bend, increase, decrease or double socket etc) tee pieces, single 'Y' branch, double branch cross (all sockets, socket and spigots, collars, cap plugs etc up to 150 mm bore complete all as specified and directed.
200
-
-
... More
All as per item No 36.00 above but for 200 mm bore to 300 mm bore.
200
-
-
... More
Burning out lead joint in position for following sizes of CI / DI pipe, removing old lead complete all as specified and directed :-
-
-
-
... More
80 mm Dia
6
-
-
... More
100 mm Dia
8
-
-
... More
150 mm Dia
8
-
-
... More
200 mm Dia
4
-
-
... More
250 mm Dia
2
-
-
... More
M&L for run lead joint for CI pipe / DI pipe including spun yarn etc for spigot and socket pipes and fittings complete all as specified and directed for the following bore of pipes:-
-
-
-
... More
80 mm Dia
6
-
-
... More
100 mm Dia
8
-
-
... More
150 mm Dia
8
-
-
... More
200 mm Dia
4
-
-
... More
250 mm Dia
2
-
-
... More
S&F in repairs CAST IRON OR DUCTILE IRON MECHANICAL COUPLING / MECHANICAL JOINT / D JOINT heavy duty including all jointing material, ISI marked, split type with long collar, suitable rubber rings, bolts, nuts and washers etc suitable for MS / CI / DI / GI / PVC pipes of following sizes as required for repairing of any kind of leakages complete all as specified and as directed:- Notes:- (a) Excavation and Earth work shall be measured and paid separately. (b) Quoted rate inclusive of cutting of any kind of pipes and all ITEMS as required for fixing and proper functioning of Joints. (c) Quoted rate is deemed to be inclusive of necessary T&P for cutting the pipe line, Pump sets for De-watering, JCB for Excavation (if required) etc and no extra payment shall be admissible on this account.
-
-
-
... More
80 mm Dia
2
-
-
... More
100 mm Dia
4
-
-
... More
150 mm Dia
4
-
-
... More
200 mm Dia
4
-
-
... More
250 mm Dia
2
-
-
... More
300 mm Dia
2
-
-
... More
Supply and fixing in replacement of DI D / F Gate valve (Soft Sealed) Resilient Seated Soft Sealing gate valves (Sluice valves RAISING TYPE) with body bonnet of ductile cast iron of grade GGG-40 / SG- 400 / 15 or GGG-50 / SG-500 / 7 or equivalent grade as per IS 3896 - Part 2- 1985 and subsequent revisions, Wedge fully rubber lined with EPDM Food grade quality and Seals of NBR and the valve should be vacuum tight and 100 % leak proof with face to face dimension as per BS 5163-89 / IS 14846-2000 / DIN 3202 F 4. and Valves should be electrostatic powder coating both inside and outside pocket less body passage class PN 1.6 including all jointing materials (Gasket, Nutbolts ets) connecting and testing complete all as specified and directed. Note : OLD SRRVICEABLE VALVES TO BE DEPOSITED TO the DEPARTMENT store FOR FURTHER USE as directed by Engr-In-Charge.
-
-
-
... More
80 mm Dia
6
-
-
... More
100 mm Dia
2
-
-
... More
150 mm Dia
4
-
-
... More
200 mm Dia
2
-
-
... More
Supply and fix NRV including making provisions in existing pipeline of CI / DI / MS of the following sizes completed all as directed.
Note : Quoted rates inclusive of all arrangement required for the above
-
-
-
... More
150 mm Dia
1
-
-
... More
200 mm Dia
1
-
-
... More
S&F in replacement of Cast Iron sluice valves flanged ends stem of SS (AISI410) & Bronze (Gun Metal) working parts IS : 14846 both ends flanged with clamps and check nuts, operating wheel etc, rising type K506, class PN 1.6 including jointing materials connecting and testing complete all as specified and directed.
-
-
-
... More
150 mm Dia
1
-
-
... More
200 mm Dia
1
-
-
... More
300 mm Dia
1
-
-
... More
S&F, connecting and testing in repair of Cast Iron non return (Reflux) valves flanged ends in swing type design IS-5312 part-I, K517, PN-1.6 both ends flanged etc including jointing materials of following sizes complete all as specified and directed.
-
-
-
... More
65 mm Dia
1
-
-
... More
150 mm Dia
1
-
-
... More
S&F, connecting and testing in repair of Cast Iron foot Valves flanged ends swing type operation with rubber seat as per IS : 4038 single disc with all standard accessories and tested including replacement of nuts, bolts, washers, gaskets, packings etc complete all as specified and directed.
-
-
-
... More
50 mm Dia
1
-
-
... More
65 mm Dia
1
-
-
... More
100 mm Dia
1
-
-
... More
150 mm Dia
1
-
-
... More
200 mm Dia
1
-
-
... More
S&F, connecting and testing in repair of Cast Iron double orifice kinetic Air Valve ISI Marked IS : 14845 type DK in PN 1.0 flanged end K541 with all standard accessories and tested including replacement of nuts, bolts, washers, gaskets, packings etc complete all as per specified and directed.
-
-
-
... More
80 mm Dia
1
-
-
... More
100 mm Dia
1
-
-
... More
150 mm Dia
1
-
-
... More
Cutting the existing road of any kind straight by manual, depth and width not less than 30 cm for pipes up to 100 mm dia and 60 cm for pipes from 150 mm to 150 mm dia and 75 cm for pipes above 400 mm dia and filling back with excavated soil up to 75 % road portion and 25 % shall be made with premix bitumen patch mate
40
-
-
... More
M&L for Construction of new PCC solid Masonry valve chamber of size 1500 X 1500 X 1500 mm (Internal dimensions) with PCC foundation 1:4:8 type D2 using 40 mm graded stone aggregate 150 mm thick 150 mm wide off sets around over 100 mm thick hard core, 200 mm thick PCC solid block walls built in CM 1:6, 50 mm thick PCC 1:2:4 Type B1 coping finished even and smooth, rendering 10 mm thick in cement mortar (1:6) finished even and smooth, with out using extra cement internally including top of floor including excavation earth work in hard / Dense soil 3 mm thick MS sheet cover fixed on 40 mm X 40 mm X 6 mm thick angle iron frame with hold fasts embedded in PCC coping with locking arrangement, mild steel handle and painting to steel surfaces with two coats of synthetic enamel paint over one coat of primer including disposal of surplus soil to a distance not exceeding 50 m etc complete all as specified and directed.
4
-
-
... More
M&L for replacement of cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections including welding, bending cold or hot, drilling holes for hinged, in any shape or size as indicated for valve chamber top cover, 4 mm thick MS sheet cover fixed on 40 mm X 40 mm X 6 mm thick angle iron frame with locking arrangement, mild steel handle, and painting to steel surfaces with two coats of synthetic enamel paint over one coat of primer including disposal of surplus soil to a distance not exceeding 50 m etc complete all as specified and directed.
2
-
-
... More
M&L PCC 1:3:6 type C1 using 20 mm graded stone aggregate for coping complete all as directed
1
-
-
... More
Rendering 10mm thick on the faces of brickwork or concrete surfaces Cement plaster of ratio 1:4 all as specified and directed by Engr-in-Charge.
70
-
-
... More
Supply and fix in replacement of nuts and bolts of required size including suitable washers as required at site
72
-
-
... More
Supply and lay pipes MS BLACK ERW steel including specials having nominal dia 450 MM (outer dia 466 MM) and 8 MM Thick as per IS 3589-2001 Grade- 330 with plain ends for header and specials by welding of off size with suitable flange as per site requirement and required length of pipe of suitable size as 200mm at 2 nos,100mm at 8 nos and 80mm at 2 nos including MS flange welding complete, leak arresting of header complete all as specified and directed including taking down old unserviceable header.
Note : Quoted rate is inclusive of supply and fixing of flange and MS pipe of suitable size as required, welding, cutting etc as required for fixing of pipe
1
-
-
... More
Supply and lay Pipes MS black ERW Steel including specials having nominal dia 100 mm of thickness 6.0 mm as per IS 3589 - 2001, Grade - 330 with plain ends and specials by welding, leak testing of line laid in trenches / floors / walls / ducts complete all as specified and directed.
Note: Quoted rate is inclusive of supply and fixing of flange of suitable size as required, bends welding and cutting etc as required for fixing of pipe.
6
-
-
... More
Supply and lay Pipes MS black ERW Steel including specials having nominal dia 150 mm of thickness 6.0 mm as per IS 3589 - 2001, Grade - 330 with plain ends and specials by welding, leak testing of line laid in trenches / floors / walls / ducts complete all as specified and directed.
Note: Quoted rate is inclusive of supply and fixing of flange of suitable size as required, bends, welding and cutting etc as required for fixing of pipe.
6
-
-
... More
Supply and lay MS black tubing ERW welded including specials, having outside dia of 212 mm and 6 mm thick ISI marked conforming to IS 3589 - 2001 with plain ends complete including connecting of MS pipes and specials by welding, leak testing of pipe line laid in trenches / floors / walls / ducts complete all as specified and as directed by the Engineer-in-charge.
Note: Quoted rate is inclusive of supply and fixing of flange of suitable size, bends as required, welding and cutting etc as required for fixing of pipe.
6
-
-
... More
Supply and lay MS black tubing ERW welded, having outside dia of 316 mm and 8 mm thick ISI marked conforming to IS 3589 - 2001 with plain ends complete including connecting of MS pipes and specials by welding, leak testing of pipe line laid in trenches / floors / walls / ducts complete all as specified and as directed by the Engineer-in-charge.
Note: Quoted rate is inclusive of supply and fixing of flange and bends of suitable size as required, welding and cutting etc as required for fixing of pipe.
10
-
-
... More
Supply only Bleaching powder Grade-I, IS 1065:1989 (used in drinking water) , stable dry free flowing white in appearance without hard lumps and visible impurities in laminated high density polythene bags of 25 Kgs capacity of each bags. Notes:
(i) Contractor shall supply material as per monthly requirement basis in bags / containers as and when directed by Engr-in-Charge at various installation of AGE E / M No-II.
(ii) The quoted rate is deemed to be included complete labour and transportation for the materials at various installations of AGE E / M No II with out any extra cost.
95
-
-
... More
Supply and fixing of DOL Starter suitable for upto 7.5 HP Motor, 5.5 KW and relay max range 20-32 Amp as in repairs complete all as specified and as directed. Makes : L&T cat part No CS90947 or equivalent of Havells / CG as approved.
12
-
-
... More
S &F in replacement of isolator 40 Amps 4 pole
8
-
-
... More
S &F in replacement of isolator 63 Amps 4 pole
6
-
-
... More
S &F in replacement of isolator 100 Amps 4 pole
6
-
-
... More
S &F in replacement of MCB triple pole "C" curve type 32Amps 3 pole
8
-
-
... More
S &F in replacement of MCB triple pole "C" curve type 40 Amps 3 pole
8
-
-
... More
M&L for attending, repair and rectification of external LT electric supply complaints on up to 1100 Volts grade, over head / underground system alongwith necessary T&P, safety devices as per site requirement for the following type of complaints complete all as specified and directed:-
-
-
-
... More
Replacement of worn out jumpers, jointing and tightening with new ACSR conductor.
Note:- Single phase / two wire or 3 phase / 4 wire system will be considered as one job for payment purpose.
30
-
-
... More
Disconnecting from over head conductor, cutting worn out portion of LT cables of any type and size, carry out repairs including taking out cables from under ground loop line and rejoining the same to restore electric supply.
Note :- (i) LT Jointing Kits, Cable protection Pipe if required at site will be measured and paid separately.
(ii) Quoted rate is deemed to be inclusive of cutting and removing the pole coping and inserting the cable alongwith protection pipes.
25
-
-
... More
Taking down old unsv Street light / flood light fittings in any position of any capacity for Repair by replacement of unsv spares (SPD / Driver / Mccb etc ) and re-fixing the same in existing location.
Note:- Spares for repair of street light fittings will be measured and paid under respective items.
30
-
-
... More
Notes for Item Nos 66.01 to 66.03:-
(a) The contractor will be allotted complaints at MES complaint cell on daily basis on all working days and sufficient resources will be deployed by him / her for completion of day to day complaint within 24 Hrs from the time of reporting. Any delay beyond above mentioned time limit without intimation of sufficient cause, penalties will be recovered twice of the quoted rate for each un-attended complaint. (b) A detailed log of complaints with completion / non-completion remarks from users / MES will be maintained by the contractor and the same will be updated on daily basis in consultation with Engr-in-Charge or JE E&M as detailed.
(c) The contractor will make suitable arrangement for emergency complaints and will notify auth rep / Engr-in-Charge about extraordinary circumstances for probable non-completion or delay in rectification of complaints beyond stated time limit set for disposal of complaint. In case of any dispute the decision of accepting officer will be final and binding in this regard.
-
-
-
... More
[Contd...]
(d) The contractor will intimate MES authority well in advance if electric shutdown is required during rectification of complaints.
(e) The quoted rate is deemed to be inclusive of transportation and other expenses required for the resource deployment at the complaint site around scattered Military station at Secunderabad.
(f) The contractor will maintain location wise record of each spare utilized as per inventory format given by AGE E / M, Secunderabad and the same shall be submitted to E / M No II store on daily basis.
-
-
-
... More
M&L IN Replacement for ACSR conductor, steel reinforced for LT over head lines on poles including stretching tightening of poles insulator with binding wire of suitable size with insulator / stretching of ACSR conductor including disconnecting / taking out old existing unsv ACSR conductors complete all as specified and directed.
0.5
-
-
... More
M&L in Replacement for Pin type, porcelain, vitreous, white, brown or green insulator including one galvanised mild steel spindle, two galvanised iron washers and one galvanised iron nut, 100 mm height, 65 mm dia for 1100 volts grade, including disconnecting / taking out old existing unsv insulators complete all as specified and directed.
10
-
-
... More
M&L for Shackle type, Porcelain, vitreous, white, brown or green insulator including galvanised mild steel straps, washers, insulator bolts, washers and nuts of size 100 mm height, 115 mm dia for 1100 Volt grade, section of straps 31x5 mm, including disconnecting / taking out old existing unsv insulators complete all as specified and directed.
10
-
-
... More
S&F in Replacement Stay assembly comprising of 7 / 10 SWG galvanised MS stranded stay wire of required length, minimum tensile strength 70 Kg / mm (grade-2 quality) fixed to pole with and including FI clamps, bolts, nuts, washers, galvanised steel stay rod 16mm dia 180 cm long bow 400 x 14 mm nuts / bolts, washers, loop type insulator of size 65 x 90 mm vitreous, clearance dia of hole 16mm, stay plate of size 230 x 230 x 6 mm including necessary excavation and earth work PCC 1:3:6 type C-2 using 40 mm graded crushed stone aggregate in foundation and disposal of surplus soil, upto 50m including disconnecting / taking out old existing unsv stay assembly complete all as specified and directed.
4
-
-
... More
S&F of Galvanised steel wire (GI) 4mm dia including disconnecting / taking out old existing unsv GI wire complete all as specified and directed.
0.15
-
-
... More
M & L in Replacement for cross arms, bracing, supports clamps and back plates fabricated from structural steel section incl nuts, bolts washers, welding, bending cold or hot drilling holes for bolts in any shapes or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of paint including disconnecting / taking out old existing unsv cross arms complete all as specified and directed.
1
-
-
... More
Supply & Replace MCCB along with both side spreader link and nut bolts of appropriate size (Conforms to IEC:60947-II / IS:13947-II) in existing LT Panel box / Feeder Pillar boxes (KIOSK) ,in MCCB DBs of capacity 400 Amps, 3 pole / 4 Pole, 50 KA, 415 Volt including disconnecting / taking out existing old unsv / burned MCCB complete all as specified and directed. Make : Havells / Standard / L&T / HPL
1
-
-
... More
All as per item No- 73.00 here in before but of capacity 320 Amps, 4 pole, 25 KA
1
-
-
... More
All as per item No- 73.00 here in before but of capacity 250 Amps, 4 pole, 25 KA
1
-
-
... More
All as per item No- 73.00 here in before but of capacity 200 Amps, 4 pole, 25 KA
2
-
-
... More
All as per item No- 73.00 here in before but of capacity 160 Amps, 4 pole, 16KA
2
-
-
... More
All as per item No- 73.00 here in before but of capacity 125 Amps, 4 pole, 16 KA
4
-
-
... More
All as per item No- 73.00 here in before but of capacity 100 Amps, 4 pole, 16 KA
4
-
-
... More
All as per item No- 73.00 here in before but of capacity 63 Amps, 4 pole, 16 KA
2
-
-
... More
Supply and install in Replacement street light timer panel including, astronomical digital timer, contactor SINGLE phase MCB 40 Amps suitable for incomer and outgoing for overload and short circuit protection, prewire ready to use & locking arrangement of make Havells or equivalent in Siemens / Schneider
2
-
-
... More
Supply and replace contactor single pole 20 / 25 / 32 amps in street light timer box coil operating voltage 230 volt complete all as specified and directed.
Make : BCH / L&T / as approved by GE
2
-
-
... More
Supply and replace contactor single pole 40 / 63 amps in street light timer box coil operating voltage 230 volt complete all as specified and directed. Make : BCH / L&T / as approved by GE
2
-
-
... More
Supply, lay, commissioning and testing in Replacement of cable jointing Kit Heat shrinkable type for 1100 V grade cable for straight through joint with jointing material and accessories suitable for LT UG cable of size 16 to 50 Sqmm, 3.5 Core complete all as specified and directed.
2
-
-
... More
All as per item No 84.00 above but suitable for aluminium conductor cable of size from 70 sqmm, 3.5 Core to 95 Sqmm, 3.5 Core
2
-
-
... More
All as per item No 84.00 above but suitable for aluminium conductor cable of size from 120 sqmm, 3.5 Core to 150 Sqmm, 3.5 Core
2
-
-
... More
All as per item No 84.00 above but suitable for aluminium conductor cable of size from 185 sqmm, 3.5 Core to 240 Sqmm, 3.5 Core
2
-
-
... More
Supply and lay in Replacement of trenches / fixed to walls / poles etc connecting buy using lugs, testing and commissioning XLPE insulated and PVC sheathed heavy duty LT 1100 Volts grade armoured under ground cable with stranded aluminium conductor 4 Core 10 Sqmm complete all, as specified and directed Note :- Earth work excavation, sand cushioning and brick protection shall be measured and paid separately.
200
-
-
... More
All as per item No 88.00 above but 2 Core 10 Sqmm
200
-
-
... More
All as per item No 88.00 above but 4 Core 16 Sqmm
200
-
-
... More
All as per item No 88.00 above but 4.0 Core 25 Sqmm
100
-
-
... More
All as per item No 88.00 above but 3.5 Core 50 Sqmm
100
-
-
... More
All as per item No 88.00 above but 3.5 Core 95 Sqmm
50
-
-
... More
All as per item No 88.00 above but 3.5 Core 120 Sqmm
55
-
-
... More
All as per item No 88.00 above but 3.5 Core 185 Sqmm
40
-
-
... More
Supplying, erecting and fixing in replacement of steel tubular swaged poles with cast iron base plate of size 300mm x 300mm x 6mm, finial taper plug, bolts, nuts & screws for type 410 SP-31 (9.0 mtrs long) including painting with two coats of aluminium paint over one coat of red oxide primer on all exposed surfaces and tarring with black bituminous paints to embedded portion in PCC and providing 3 Nos of 30cm wide circular bands with black & yellow paint starting from plinth level at a gap of 30 cm in between 2 bands and numbering of poles, in yellow paint over black painted back ground at a height of 2m from bottom of pole with 5 cm large bold letters 2" (inch) wide including taking down old unserviceable PCC poles of any type complete all as specified and directed.
Note: Excavation, earth work, PCC in foundation and coping shall be measured and paid separately under relevant item of this schedule.
2
-
-
... More
Restreching / Restringing, tightening and repair to overhead line ACSR conductor of any size on LT poles including necessary Aluminium binding wire connectors PVC sleeves for jumper, fixing of insulators and pruning of tree complete all as specified and directed. Notes: (i) The distance between pole to pole in one span (contains 2 / 4 / 6 runs) i.e. one span will only be considered for payment purpose. (ii) No Extra conductor will be measured for binding to insulators / jumpering etc.
100
-
-
... More
Excavation in trenches, n exc 1.5 m wide and exc 1.5 mtr but not exc 3 mtr. in depth, for foundation of PCC / Steel pole, laying of cable in trenches etc and getting out in Hard / Dense soil complete all as specified and directed.
1
-
-
... More
Spreading riddled earth (after preparation of excavated earth) in Cable duct for cushioning of cable laid in trenches complete all as directed by Engineer-in-Charge Note:- Punned thickness 18 CM (6.25 Cm below cale and 11.75 cm above cale) will be measured for payment purpose. The earth removed during excavation to be used as riddled earth after crushing and sieving. Quoted rate inclusive of all arrangement as mentioned.
60
-
-
... More
Supply and Replacement of Laying bricks, common burnt clay building bricks, sub class 'B' of size 230 x 115 x 75mm laid across in trenches for cable protection complete all as specified and directed.
8.5
-
-
... More
Laying only old Brick in trenches for Under Ground Cable Protection, complete all as directed.
800
-
-
... More
M&L in Replacement of PCC 1:4:8 type D2 using 40 mm graded stone aggregate for filling & foundation of pole & mass complete all as directed
1
-
-
... More
M&L in Replacement of PCC 1:3:6 type C2 using 40 mm graded stone aggregate for filling & foundation of pole & stay complete all as directed
4.4
-
-
... More
M&L in Replacement of PCC 1:2:4 type B1 using 20 mm graded stone aggregate for coping of pole complete all as directed
5
-
-
... More
Cutting the existing road / PCC surface straight by manual, depth and width not less than 1 mtr below ground level for passing of underground cable and filling back with excavated soil upto 75% road portion and 25% shall be made with cement concrete 1:2:4 (using 20 mm graded aggregate stone complete all as specified and directed.
50
-
-
... More
M&L for road crossing / drain crossing by adopting trench less tunnelling work through specified pipe jacking method by erecting the equipment to true to the alignment and gradient by hydraulic pipe jacking technique complete including tunnelling, excavation in any type of soils including hard rock, HDPE / GI pipe medium duty of size 100 mm dia in any length including jointing materials to carry LT UG cables of size upto 240 Sqmm and necessary conveyance charges of machinery and other required materials in co-ordination with the concerned authorities complete all as specified and as directed.
Note: Pipe will be measured and paid separately under relevant items
6
-
-
... More
M&L repair / maintenance of stay by tightening of stay wire after untying the conductor spans from the poles to make correct tensions and maintain verticality of poles, including re-jointing the conductors in position with new binding wire complete all as specified and directed.
10
-
-
... More
M&L for painting the existing LT steel poles of 9.0 Mtr long including cross arms, clamps, street light junction boxes etc with 1 coats of aluminium paint including thoroughly cleaning the existing surface, writing of pole numbers in yellow circle 15 cm with black paint on poles. Painting the poles up to 1.5 Mtr height with alternate bands 30 cm height (3 Nos black and 2 Nos Yellow) from ground level, complete all as specified and directed.
80
-
-
... More
M&L for Painting the existing LT PCC poles with 1 coats of synthetic enamel base paint including painting of cross arms, clamps, etc with one coat of aluminium paint and providing alternative band of 30 cm width (3 black and 2 yellow) from bottom of pole to 1.5 metres height, writing of pole numbers in yellow circle15 cm with black paint on poles complete all as specified and directed.
50
-
-
... More
M&L in Replacement of Advance Maintenance Free G.I. SAFE EARTHING Electrode with PIPE of not less than 50 mm outer dia) and two meter length, The electrode should be of galvanised (80 -100 micron) along with earth lead as Galvanised steel strip of size 32 X6 mm 7.5 m. The GI Electrode shall be pre-filled with Crystalline Conductive Material (CCM). The GI electrode shall be surrounded with 25 kg Backfill compound to provide maximum contact between the electrode and Back Fill Compound. The earthing pit cover should be factory built (size TOP- 10 Inch, Bottom -13 Inch, Height 10.25 Inch ) made of heavy duty Polypropylene complete all as specified and directed.
8
-
-
... More
S&F in Replacement of galvanised steel strip 32X6 mm with saddles and fixing screws on porcelain insulator / spacer fixed at every 1 mtr length as lightening conductor on roof / wall of explosive building and joining the same with existing earth test point all as directed by Engr-in-Charge.
50
-
-
... More
Trimming / pruning and removing of tree branches or any other foreign objects from HT / LT over head conductor and clearing the OH Line of any type and size for one span of any length in 2 way / 4 way / 6 way conductor system. Notes:
(i) Insulators of any type, connectors and ACSR conductor of any size required at site will be measured and paid separately under relevant item of this schedule. (ii) The contractor is responsible for provision of Necessary T & P and safety equipment's to complete the job.
500
-
-
... More
Cutting unaxious green growth and grass by manual labour or by machine at all 11 KV Electric Installation premisses / around 2 / 4 Pole structure / along the boundary fencing and removing rubbish from the site of work complete all as specified and directed.
4000
-
-
... More
S&F in Replacement of LED street light fitting 90 Watt 230 V AC outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65 / 66 protection complete, lighting source and lens embedded PC cover having TOP OPENING separate driver compartment with IP66 protection and impact resistance of IK07 with 10 KV Built-in-Surge Protection Device, road way light fitting with high power LED as light source of capacity 90 watts with suitable drivers etc and connecting with 1.5 Sqmm copper conductor PVC insulated three core weather proof cable etc, fixing to wall / pole, complete all as specified and directed.
Notes:
(i) Contractor has to produce LM-79 / LM-80 certificate alongwith purchase vouchers.
(ii) Surge protection of the drive should be 10 KV
8
-
-
... More
S&F in Replacement of LED flood light 100 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp die-cast aluminium IP66 flood light, suitable for highlighting architectural facade and general purpose lighting, with high power LED as light source of capacity 120 watts with suitable drivers etc and connecting with 4.0 Sqmm aluminium conductor PVC insulated twin core weather proof cable etc, fixing to wall / pole complete all as specified and directed. Notes:
(i) Contractor has to produce LM-79 / LM-80 certificate alongwith purchase vouchers.
(ii) Surge protection of the drive should be 10 KV
6
-
-
... More
Supply and Fix LED Driver of similar wattage with operating voltage input ac 85- 300 volt, pf.95 as per IS 15885 with inbuilt surge protection of minimum 5 kv and BIS certified suitable for 90 watts LED street light fittings of any make complete all as specified and directed.
Make : Bajaj / Surya / power palazzo / Philips / Wipro / Havells.
10
-
-
... More
S&F in Replacement of PVC insulated unsheathed / sheathed cable with stranded Aluminium conductor 1100 Volts grade, flat twin core service cable of size 4 Sqmm conforming to IS:694 / 1990 with latest amendments ISI including disconnecting / taking out existing unsv / damaged old service cable complete all as specified and directed.
200
-
-
... More
All as per item No-118.00 above but of size 6 Sqmm complete all as specified and directed.
200
-
-
... More
S&F hot press moulded SMC junction / terminal box of size with internal dimensions of 300 x 200 x 100 mm with hinged door, incl provision of 2 way connector 415 Volts made out of polycarbonate or Bakelite and 1 No MCB of 6 Amps with DIN bar, drilling holes for cable connections, connecting incoming and or out going cables by providing suitable of size of cable lugs / glands, fixed on pole by means of clamps made out of MS flat iron of size 25mm x 3 mm 2 Set including dismantling of old unserviceable all as specified and as directed.
Make : Syntex / C&S / Havells.
20
-
-
... More
Supply and laying in Replacement of GI tubing light grade of size 40 mm for cable protection on road / drain / floor / pole including necessary clamps 40x4mm.
20
-
-
... More
Supply and laying in Replacement of GI tubing light grade of size 50 mm for cable protection on road / drain / floor / pole including necessary clamps 40x4mm.
20
-
-
... More
Supply and laying in Replacement of GI tubing light grade of size 80 mm for cable protection on road / drain / floor / pole including necessary clamps 40x4mm.
6
-
-
... More
S&F MCCB box FACTORY FABRICATED Powder coated Suitable for fixing at WALL including two set of clamps comprising with the following:
i) MCCB 125 Amps 16 KA FP WITH BOTH SIDE SPREADER LINK.
4
-
-
... More
Supply, installing, testing and commissioning, factory made and tested, LT panel board outdoor type, weather, vermin proof, cubical type, platform mounted, of suitable size for 415 volts, 3 phase 4 wire 50 Hz AC supply system all as specified and directed, with necessary bus bar arrangement with insulated bus bar of suitable rating, 4 strips in 3 phase and half neutral fashion, the panel should be dust proof, made out of 3.15mm thick CRCA mild steel sheet with 50x50x6mm angle iron frame with necessary earth work excavation, hinged doors, front and rear opening and locking arrangement and duly powder coated on the out side and inside, cable glands and lugs for incoming and out going cable etc, independent chamber to accommodate complete all as specified and directed including following accessories :-
1
-
-
... More
(a) MCCB 4 pole adjustable, 200 Amp, 415 Volts 25 KA - 01 No
(b) MCCB 4 pole adjustable, 160 Amp, 415 Volts 16 KA - 02 Nos (b) MCCB 4 pole adjustable, 160 Amp, 415 Volts 16 KA - 02 Nos (c) Indicating lamps (set 03 Nos) - 01 set (R,Y & B) (d) Digital Voltmeter, Ammeter three phase class including CTs of suitable ratio with selector switch
(e) Panel wiring with suitable size PVC insulated heavy duty 1100 volts grade single core cable with copper conductor multistranded with cable end termination lugs.
-
-
-
... More
Supply, installing, testing and commissioning, factory made and tested, LT panel board outdoor type, weather, vermin proof, cubical type, platform mounted, of suitable size for 415 volts, 3 phase 4 wire 50 Hz AC supply system all as specified and directed, with necessary bus bar arrangement with insulated bus bar of suitable rating, 4 strips in 3 phase and half neutral fashion, the panel should be dust proof, made out of 3.15mm thick CRCA mild steel sheet with 50x50x6mm angle iron frame with necessary earth work excavation, hinged doors, front and rear opening and locking arrangement and duly powder coated on the out side and inside, cable glands and lugs for incoming and out going cable etc, independent chamber to accommodate complete all as specified and directed including following accessories :-
1
-
-
... More
(a) MCCB 4 pole adjustable, 250 Amp, 415 Volts 25 KA - 01 No
(b) MCCB 4 pole adjustable, 200 Amp, 415 Volts 16 KA - 02 Nos (b) MCCB 4 pole adjustable, 160 Amp, 415 Volts 16 KA - 02 Nos (c) Indicating lamps (set 03 Nos) - 01 set (R,Y & B) (d) Digital Voltmeter, Ammeter three phase class including CTs of suitable ratio with selector switch
(e) Panel wiring with suitable size PVC insulated heavy duty 1100 volts grade single core cable with copper conductor multistranded with cable end termination lugs.
-
-
-
... More
M&L for shingle filling in floors or paving's of gauge 20 mm to 40mm deposited spread and levelled in layers not exc 150 mm thick watered and rammed to true surface complete all as specified and directed
50
-
-
... More
Supply and fixing in replacement the 75 KVAR APFCR PANEL - OUTDOOR TYPE :: Design, Manufacture, Testing & Supply of Outdoor type LT APFCR Panel as per Specifications Annexure of suitable size for mounting following items.
1
-
-
... More
Outdoor type Enclosures :of suitable size, Made out of 14 SWG CRCA Sheet, Compartmentalised, Outdoor Application, Floor mounting type, Front Operated, Double Door type, Dust & Vermin proof, Rain Protection Canopy, Cable Entry Bottom with Standard Gland Plate, Standard Handle with Lock Insert, Door Sealing Gasket, Enclosure Paint Siemens Gray Powder Coating.1 set
-
-
-
... More
Aluminium Bus Bars & Accessories : 200 Amps Rated, Aluminium E91E grade Bus Bars of (0.8 Amps / Sq.mm) Size of Bus Bar : 1 x 10 mm x 25 mm / Equivalent / Phase & Neutral, FRP / DMC / SMC Bus Bar Supports, PVC Sleeve, FRP Partition Sheets, Hardware, Mounting Clamps, Supports for Internal Arrangements
with required Acessories.1 set
-
-
-
... More
Internal Wiring : Power & Control Wiring inside the switchgear shall be carried out with 1100 / 650V grade, PVC insulated, stranded conductor wire. Minimum size of conductor for Power Circuits is 2.5 Sq.mm. copper, Control circuits shall be wired with copper conductor of 1.0 / 1.5 Sq.mm. Printed identification ferrules / marked to correspond with the working diagrams shall be fitted to each wire.1 set
-
-
-
... More
INCOMER FEEDER:
(i) 160A MCCB FEEDER - 1 set
(ii) MCCB : 160 Amps, 3 Pole, 36 kA, MCCB with Adjustable Over Current & Short Circuit Thermal Magnetic Release. - 1 No
(iii) MCCB Accessories : Extended Rotary Handle -1 No
(iv) MCCB Accessories : 3 Pole Spreader Links (In put & Out Put Side ) - 1 set
(v) PIL : R - Y - B - Phase Indicating Lamps (LED type) , 230VAC - 1 No
(vi) CMCB : 6 Amps, 1 Pole, 10 kA, Control MCB- 3 set
(vii) DVM : 0 - 500V, Digital Volt Meter, Class-1.0, 96 Sq.mm, Flush mounting with Volt Meter Selector Switch - 1 set
(viii) DAM : 0 - 150A, Digital Ammeter, Class-1.0, 96 Sq.mm, Flush mounting with Ammeter Selector Switch - 1 set
(ix) APFCR : 6 Stage, Intelligent Power Factor Controller / APFCR Relay with LED Display - 1 No
(x) CT's : 150 / 5 Amps, Class - 1.0, 10 VA, ID-30mm, Bar Primary, Tape Wound, Current Transformers - 1 No
(xi) CT's : 300 / 5A, Class - 1.0, 15 VA, ID-55mm, Bar Primary, Tape Wound, Current Transformers for APFCR Sensing - 1 No
(xi) NLK - CTS : 10 Amps, 1 Pole, Shorting type, Neutral Links / CT Shorting Links. - 1 No 5 Nos.
(xii) Panel Ventilation : 220 - 240 VAC, High Speed - 4 Inch, Fresh Air / Exhaust Fans, Filters, Safety Grills with Protection Fuse / MCB - 2 No
-
-
-
... More
CAPACITOR BANK FEEDERS :;
(i) 25 KVAR - Auto / Manual Feeder :: It comprising of--1 set
(ii) MCB : 63 Amps, 3 Pole, 10 kA, C-Curve, Miniature Circuit Breaker - 1 No
(iii) CDC :: 25 KVAR Capacitor Switching Duty, 3 Pole, AC Operated, Contactor with
230 VAC Coil & 1NO Aux. Contacts- 1 No
(iv) CAP : 25 KVAR, 3 Phase, 440V, 50Hz, Delta Connected, Super Heavy Duty
Capacitor Banks - 1 No
(v) SS :: 6 Amps, 1 Pole, 2 Way with Off, Auto / Manual Selector Switch - 1 No
(vi) PB :: ON & OFF Push Buttons with NO / NC Elements - 1 set
(vii) IL :: ON Indicating Lamps LED type with 230VAC Elments - 1 set
(viii) CF : 6 Amps, 1 Pole, 10 kA, MCB with Neutral Link - 1 set
-
-
-
... More
a) 20 KVAR - Auto / Manual Feeder: It comprising of 1 set
b) MCB: 63 Amps, 3 Pole, 10 kA, C-Curve, Miniature Circuit Breaker 1 No
c) "CDC: 25 KVAR Capacitor Switching Duty, 3 Pole, AC Operated, Contactor with
d) 230 VAC Coil & 1NO Aux. Contacts.1 No"
e) "CAP: 25 KVAR, 3 Phase, 440V, 50Hz, Delta Connected, Super Heavy Duty
f) Capacitor Banks."
g) SS: 6 Amps, 1 Pole, 2 Way with Off, Auto / Manual Selector Switch 1 No
h) PB: ON & OFF Push Buttons with NO / NC Elements 1 set
i) IL: ON Indicating Lamps LED type with 230VAC Elements. 1 set
-
-
-
... More
j) CF: 6 Amps, 1 Pole, 10 kA, MCB with Neutral Link 1 set
k) 15 KVAR - Auto / Manual Feeder: It comprising of 1 set
l) MCB: 32 Amps, 3 Pole, 10 kA, C-Curve, Miniature Circuit Breaker 1 No
m) CDC: 15 KVAR Capacitor Switching Duty, 3 Pole, AC Operated, Contactor with 230 VAC Coil & 1NO Aux. Contacts.
n) CAP: 15 KVAR, 3 Phase, 440V, 50Hz, Delta Connected, Super Heavy Duty Capacitor Banks.1 No
o) SS: 6 Amps, 1 Pole, 2 Way with Off, Auto / Manual Selector Switch 1 No
p) PB: ON & OFF Push Buttons with NO / NC Elements 1 set
q) IL: ON Indicating Lamps LED type with 230VAC Elments.1 set
r) CF: 6 Amps, 1 Pole, 10 kA, MCB with Neutral Link 1 set
-
-
-
... More
s) 10 KVAR - Auto / Manual Feeder: It comprising of 1 set
t) MCB: 20 Amps, 3 Pole, 10 kA, Miniature Circuit Breaker 1 No
u) CDC: 10 KVAR Capacitor Switching Duty, 3 Pole, AC Operated, Contactor with 230 VAC Coil & 1NO Aux. Contacts.1 No
v) CAP: 10 KVAR, 3 Phase, 440V, 50Hz, Delta Connected, Super Heavy Duty Capacitor Banks. 1 No
w) SS: 6 Amps, 1 Pole, 2 Way with Off, Auto / Manual Selector Switch 1 No
x) PB: ON & OFF Push Buttons with NO / NC Elements 1 set
y) IL: ON Indicating Lamps LED type with 230VAC Elments.1 set
z) CF: 6 Amps, 1 Pole, 10 kA, MCB with Neutral Link 1 set
-
-
-
... More
5 KVAR - Auto / Manual Feeder: It comprising of 1 set
bb) MCB: 10 Amps, 3 Pole, 10 kA, Miniature Circuit Breaker 1 No
cc) CDC: 5 KVAR Capacitor Switching Duty, 3 Pole, AC Operated, Contactor with 230 VAC Coil & 1NO Aux. Contacts.1 No
dd) CAP: 5 KVAR, 3 Phase, 440V, 50Hz, Delta Connected, Heavy Duty Capacitor Banks.1 No
ee) SS: 6 Amps, 1 Pole, 2 Way with Off, Auto / Manual Selector Switch 1 No
ff) PB: ON & OFF Push Buttons with NO / NC Elements 1 set
gg) IL: ON Indicating Lamps LED type with 230VAC Elments.1 set
hh) CF: 6 Amps, 1 Pole, 10 kA, MCB with Neutral Link 1 set
-
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%