Military Engineer Services Tender

M&L for preparing black top surfaces by brushing with wire brushes for removing caked mud etc. Sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc. complete all as specified and as directed

Applying evenly a tack coat of Cationic Bitumen Emulsion (RS-1) conforming to IS: 8887 at a rate of application of 0.2-0.3 kg/sqm on bituminous surface as specified in Table 500-5 of MoRTH specification for road and bridge works 2013, using mechanical sprayer after cleaning of existing surface as specified and directed.

M&L for premixed bituminous macadam laid / rolled with power road roller 8 to 12 Tonne capacity and compacted to required gradient and camber ( consolidated thickness 75 mm or less ) all as specified and directed .

Bituminous premix semi dense asphaltic concrete (SDAC) 30mm (consolidated thickness) in single layer using paving bitumen of grade VG-30 with 5.5% minimum binder content mixed by weight of total mix as wearing course, using hot mix plant and laid by using mechanical sensor paver, rolled and compacted to required camber and gradient complete all as specified.(Note: No Extra payment shall be paid to the contractor for more quantity of bitumen than mentioned in Sch 'A'.)

M&L for applying thermoplastic road marking paint (reflective) of specified shade or colour, 2.5 mm thick not exceeding 10cm width with glass beeds 250 gm/sqm including layout of centre line, dashes, arrows, speed breakers, writting letters etc, using hot thermoplastic paint applicator machine fitted with profile shoe, glass beads dispencer propane tank heater and profile shoe heater driven by experienced operator, on road surface made free of all dirt, scales oil grease, foreign materials etc complete all as specified and as directed.

S&F in repairs two directional CATs eyes of size 100x100x25mm made up of ABS (Astronitrilite) Butadiene Styrene engineering plastic, dynamically designed having high impact strength fitted with 02 nos highly reflective reflectors on both side, fixed on bituminous/concrete surface with suitable adhesive complete all as per manufacturers instructions. Make : Mr Illumination/3M/Aktion/Dark eye.

S&F in repairs raised reflective pavement markers Solar blinkers studs (Cat eyes) of 6 LEDs made of plastic body moulded from HIPS (Hi-impact polystrene) or ABS plastic conforming to ASTM D type 4280 type H and complying to specifications of category A and reflective panels consisting of number of lenses containing single or dual internal reflection of light entering the lens face, with height not exceeding 20mm and length and width 100mm (not exceeding surface shall be 13 Sq.cm on each face and shall preferably be 35 + 5 degree slope to base to face, fixed as per manufacturers instructions complete all as specified and as directed. MAKE: 3M / TATA BP SOLAR / SA TRAFFIC SAFETY, Kolkata / BONS LIGHT PVT LTD, Ahmedabad / ASIAN CONTROLS, Mumbai.

Supply and fix solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 12Supply and fix solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 12Supply and fix solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc. all as specified and directed 5mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc. all as specified and directed →5mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/0.3 watt one NI-ed rechargeable battery (1.2V/1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc. all as specified and directed. Make :3M TATA BNP/DARK Eye

S&F in repairs road delinators as per IRC-79-1981 (road way indicators) dual directions, retro reflective, round delinator made out of 16 gauge MS pipe 75 mm dia and of height 900mm duly powered coat painted and provided with three reflective band of colour red, white and yellow colour, 150 mm wide and50 micron thick and protected with welded wire cage including necessary excavation of size 300x300x450mm and PCC 1:2:4 type B2 foundation complete all as directed.

M&L for applying one coat reflecting paint with 50 microns thick over concrete surface or stone walls or iron and the and the application in dry area 5 degree to 50 degree celcius and flash point not less than 92 degree celcius. Retro reflective 70 to 120 Cdlx/Mtr will be measured with portable retro reflective measuring gun all as spedified and directed by Engr-in-Charge. ( Note : Colour will be aprroved by GE)

M&L for surface dressing hard and dense soil n exc 15cm deep complete all as spd and directed.

Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out as in hard/dense soil all as specified and as directed.

Removing excavated soil, to a distance n.exc 50 m and depositing where directed at al level n.exc 1.5 m above the starting point complete all as sdirected.

M&L for moorum/red bajri filling in road side berms, paving, laid in layers n exc 75mm thick, spread, levelled and rammed including watering using light weight roller all as spd and directed.

Demolition of cement concrete un-reinforced in any position and paving not exc 15cm thick above or below ground level complete all as specified and as directed.

M&L PCC (1:4:8) type D2 using 40mm graded stone aggregate as in 75mm thick as in sub base complete all as specified & directed

S&F Prepolished Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-40 Grade complete laid dry using machine compaction including 40mm thick sand cushioning complete all as specified and directed

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete.

M&L for Cement concrete work in pavement/ hard-standing of flexural strength 40 kg/per square centimetre in field using 400 kg of cement per cubic metre, thickness of concrete 25 cm or less as in hard standing complete all as specified.

M&L for forming 12mm thick expansion joints 150mm thick filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade'A'

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

M&L for stainless steel of grade 304, including bending ends, cutting, welding,smoothing cutting to holes, embedded in cement concrete etc all as specified and directed. (PCC shall be measured separately)

M&L for Micro Prismatic type XI retro reflective 4mm thick ACM (Aluminium Composite Materials) sheet shall be fixed back SS frame fixed with reveting or welding as directed

M&L for retro reflective letters including symbols (commas, dashes and arrows) letter height is n exc 10CM as directed

Demolition of cement concrete un-reinforced in any position and paving not exc 15cm thick above or below ground level complete all as specified and as directed.

S & F double legged informatory board sign of size 0.9m x 1.20 m double side fixed on frame of stainless steel of round pipe 50 mm dia (304 Grade) . Outer frame all around of stainless steel pipe 50 mm dia (304 Grade) to be provided along the round pipe. The boards are to be made of high intensity unmettalised prismatic grade retro-reflective sheeting 400 micron thick of Make : Avery Dennison /E3M, duly processed on 3 mm thick aluminum composite panel conforming to IS:736 with heat lamp vacuum applicator , etched treatment, hand squeezed roller applicator machine. The letters of any description , size, cutout, logos, formation signs etc shall be of 400 micron thick of any colour to be cut with high pressure computerized cutting plotter or with high quality digital printing with lamination to have longer life and duly fixed on sheet base high intensity grade unmet allied prismatic grade white sheeting. The aluminum composite panel duly processed as above shall be fixed on to the frame with aluminum snap head rivets in very neat manner. Then pipe of 304 Grade 16 gauge , glossy finish 3 mtr long with 50 mm dia stainless steel MS plate 3 mm thick duly welded at bottom of pipes including 02 Nos decorative bowls of SS 304 Grade to be provided at the top of 5S & F double legged informatory board sign of size 0.9m x 1.20 m double side fixed on frame of stainless steel of round pipe 50 mm dia (304 Grade) . Outer frame all around of stainless steel pipe 50 mm dia (304 Grade) to be provided along the round pipe. The boards are to be made of high intensity unmettalised prismatic grade retro-reflective sheeting 400 micron thick of Make : Avery Dennison /E3M, duly processed on 3 mm thick aluminum composite panel

conforming to IS:736 with heat lamp vacuum applicator , etched treatment, hand squeezed roller applicator machine. The letters of any description , size, cutout, logos, formation signs etc shall be of 400 micron thick of any colour to be cut with high pressure computerized cutting plotter or with high quality digital printing with lamination to have longer life and duly fixed on sheet base high intensity grade unmet allied prismatic grade white sheeting. The aluminum composite panel duly processed as above shall be fixed on to the frame with aluminum snap head rivets in very neat manner. Then pipe of 304 Grade 16 gauge , glossy finish 3 mtr long with 50 mm dia stainless steel MS plate 3 mm thick duly welded at bottom of pipes including 02 Nos decorative bowls of SS 304 Grade to be provided at the top of 50 mm dia SS pipe. Total height of pipe shall be 3.0 m above the ground level and 0.45 m to be embedded and grouted in ground in cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate including necessary excavation and earth filling, removal of surplus excavated material and making good surface complete all as specified . The sign boards shall be fabricated according to IRC -67-2010 (revised specifications) and as per MORTH specification clause 801.100 mm dia SS pipe. Total height of pipe shall be 3.0 m above the ground level and 0.45 m to be embedded and grouted in ground in cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate including necessary excavation and earth filling, removal of surplus excavated material and making good surface complete all as specified . The sign boards shall be fabricated according to IRC -67-2010 (revised specifications) and as per MORTH specification clause 801.10

M&L for PCC 1:2:4 (40m graded aggregate) for post holes all as spd and directed