Military Engineer Services Tender
For getting the details of etenders, if you are looking for information about them from the cumbersome government websites but are tired of doing so, Bidassist comes up with a one stop solution. It collates every Eproc telangana tender on Bidassist. One can approach it for the bidding process, registration process, etc., are explained below.
Military Engineer Services - MES Tender
Paints and Enamels
Furnitures and Fixtures
Eprocure
Opening Date27 Dec 2024
Closing Soon17 Jan 2025
Tender Amount₹ 25,00,000
Costs
EMD
₹ 50,000Document Cost
₹ 500Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_MES_690721_1Tender No
8664Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Removing the existing unserviceable/broken ply wood top and supply and fix new ply wood top of size 1860mmx860mm BWR GRADE duly ISI marked of Make : Green ply/century Ply/ Kit Ply with fixing in position with suitable size screws & cup washers complete all per measurements specified and shown on drawings and as directed by Engg-in-Charge. Ref Drg No.(FD-246/ 247)
20
-
-
... More
Removing the existing unserviceable./worn out/ broken plywood of head board and foot board on both sides and supply & fix new 4mm thick one side teak face plywood for head board and foot board on both sides complete all per measurements specified and shown on drawings and as directed by Engg-in-Charge.Ref Drg No.(FD-246/ 247)
20
-
-
... More
Removing the existing unserviceable/broken teak wood beading for Head board and Foot board and supply and fix new teak wood beading of 12mm dia half round for head and foot board complete all per measurements specified and shown on drawings and as directed by Engg-in-Charge.Ref Drg No.(FD-246/ 247)
20
-
-
... More
Material and labour for removing old broken / unserviceable MS bracket of Bed plywood top and Supply and fix new MS bracket of size150mmx35mmx5mm thick "L"shaped duly treated with black paint of Make: Berger/ Shalimar/ Asian complete all as per measurements specified and shown on drawings and as directed by Engg-in-Charge. Ref Drg No.(FD-246/ 247)
80
-
-
... More
Material and labour for preparation of wood surfaces of Bed plywood top by complete removal of existing treatment using grinding machine including filling of cavities by putty,filler,sealer and applying two coats of french polish to obtain glossy finish complete all as specified and as directed by Enginner-in-charge. Ref Drg No.(FD-246/ 247)
20
-
-
... More
PEG TABLE FD-236, 277 & 384Removing old unserviceable Top of Table Peg and Supply and fix new top complete of size300mmx450mm made of 18mm thick prelaminated MDF board (approved shade by GE) exterior grade, ISI marked of Make : Century Ply/ Kit Ply/ Green ply with 18mm x 4mm thick teak wood edging alround duly polished the teakwood edging complete all as per measurements specified and shown on drawings and as directed by Engg-in-Charge.
100
-
-
... More
PEG TABLE FD-236, 277 & 384Removing old unserviceable top long rail of Table Peg and Supply and fix well seasoned teak wood new long rail of size 20mmx40mmx450mm complete all as per measurements specified and shown on drawings and as directed by Engg-in-Charge.
60
-
-
... More
PEG TABLE FD-236, 277 & 384Removing old unserviceable top short rail of Table Peg and Supply and fix well seasoned teak wood new short rail of size 20mmx40mmx300mm complete all as per measurements specified and shown on drawings and as directed by Engg-in-Charge.
60
-
-
... More
PEG TABLE FD-236, 277 & 384Removing old unserviceable leg of Table Peg and Supply and fix well seasoned teak wood new leg of size 30mmx50mmx380mm complete all as per measurements specified and shown on drawings and as directed by Engg-in-Charge.
40
-
-
... More
PEG TABLE FD-236, 277 & 384Removing old unserviceable bottom rail of Table peg and Supply and fix well seasoned teak wood new bottom rail of size 20mmx40mmx300mm complete all as per measurements specified and shown on drawings and as directed by Engg-in-Charge.
50
-
-
... More
PEG TABLE FD-236, 277 & 384Removing old unserviceable PVC rings of Table Peg and Supply and fix new PVC rings of 20mm dia of best quality fixed with screw complete all as per measurements specified and shown on drawings and as directed by Engg-in-Charge.
400
-
-
... More
PEG TABLE FD-236, 277 & 384 Material and labour for 2 coats of french polish Make : Asian/ Berger / Nerolac. over a coat of wood primer to new part and 02 coat of french polish of approved shade to entire surface complete all as per measurements specified and shown on drawings and as directed by Engg-in-Charge.
100
-
-
... More
Side Board Drg No FD- 241,371Removing of old u/s top from side board and Supply and fix new top of size 1220mm x455mm made out of 18mm thick plywood BWR Gde of Make : kit ply/ Green Ply/Century Ply complete all as per measurements specified and shown on drawings and as directed by Engg-in-Charge. Ref Drg No FD-241.
20
-
-
... More
Side Board Drg No FD- 241,371Taking down old & u/s door shutters from side board and Supply and fix new door shutters of size 635mmx417mm made out of 18mm thick plywood BWR Gde of Make : kit ply/ Green Ply/Century Ply complete including fixing of flat teakwood beading all around the shutter complete all as per measurements specified and shown on drawings and as directed by Engg-in-Charge. Ref Drg No FD-241.
18
-
-
... More
Side Board Drg No FD- 241,371Removing old unsv/ broken handle / knobs from door shutter and drawers and S/F new100- 125mm long handle for shutters and knobs for drawers as per sample complete all as per measurements specified and shown on drawings and as directed by Engg-in-Charge. Ref Drg No FD-241.
18
-
-
... More
Side Board Drg No FD- 241,371Remove old unsv plywood back from side board & S/F new back of 6mm thick plywood BWR Gde of size 1220mm x 635mm of Make:kit ply/ Green Ply/Century Ply. complete all as per measurements specified and shown on drawings and as directed by Engg-in-Charge. Ref Drg No FD-241.
10
-
-
... More
Side Board Drg No FD- 241,371Removing old & u/s drawers from side board and S/F new drawers of existing shape,size made out of 6mm & 12mm thick plywood ISI marked BWR Gde of Make:kit ply/ Green Ply/Century Ply. complete all as per measurements specified and shown on drawings and as directed by Engg-in-Charge. Ref Drg No FD-241.
40
-
-
... More
Side Board Drg No FD- 241,371Removing of old u/s sides from side board and Supply and fix new sides of size 455mm x 635mm made out of 18mm thick plywood BWR Gde of Make : kit ply/ Green Ply/Century Ply complete all as per measurements specified and shown on drawings and as directed by Engg-in-Charge. Ref Drg No FD-241.
24
-
-
... More
Ditto all as per Item Sl No 3.01 here in before but for Bottom ply of side Board complete all as per measurements specified and shown on drawings and as directed by Engg-in-Charge. Ref Drg No FD-241.
24
-
-
... More
Side Board Drg No FD- 241,371 Supply new 4mm thick veener sheet of approved shade as directed by Engg-in-Charge and fixing in appropriate size and shape at item No. 3.01, 3.02, 3.04, 3.05, 3.06, 3.07 to side board complete all as per measurements specified and shown on drawings and as directed by Engg-in-Charge. Ref Drg No FD-241. Make of veneer sheet : Century ply/Green Ply/kit ply.
136
-
-
... More
Side Board Drg No FD- 241,371 Removing old & u/s legs from side board and S/F new legs of existing shape,size made out of well seasond teakwood complete all as per measurements specified and shown on drawings and as directed by Engg-in-Charge. Ref Drg No FD-241.
10
-
-
... More
Side Board Drg No FD- 241,371Removing old unsv/ broken hinges from shutter and S/F new piano type continuous hinges of size 20-25mm as per sample approved by GE for both Door shutter complete all as per measurements specified and shown on drawings and as directed by Engg-in-Charge. Ref Drg No FD-241.
12
-
-
... More
Side Board Drg No FD- 241,371Removing of u/s locks from the door shutters of side board & S/F new brass locks 4 levers 40mm with duplicate keys of Make: Mortice/ Harrison / Godrej complete all as per measurements specified and shown on drawings and as directed by Engg-in-Charge. Ref Drg No FD-241.
16
-
-
... More
Side Board Drg No FD- 241,371Removing of all u/s beading from front portion of side board & S/F new 4mm thick, 18mm wide teak wood beading of semi round shape to complete front portion of side board complete all as per measurements specified and shown on drawings and as directed by Engg-in-Charge. Ref Drg No FD-241.
20
-
-
... More
Side Board Drg No FD- 241,371All entire side board shall be done 02 coats of Frencg polish of approved shade complete all as per measurements specified and shown on drawings and as directed by Engg-in-Charge. Ref Drg No FD-241.
20
-
-
... More
Sofa Set 5 Seater FD-281, FD-373 Material and labour for Removal of old existing unsv foam cusion with tapestry cover of seat of sofa set 5 seater and Supply and fix 100mm thick and 40 density PU foam cushion of Make - Kurl-on/ Sleepwell/ Springwell of size 535mmx560mm covered with best quality cora cloth and tapestry cloth of Make : D'Decor / Vivid Collection/ Bombay Dying of approved shade by Engg-in-Charge/GE duly stitched with nylon zip on one side complete all as per measurements specified and shown on drawings and as directed by Engg-in-Charge. Ref Drg No FD-281,373
(Note: Each set contains 5 nos of seat)
50
-
-
... More
Sofa Set 5 Seater FD-281, FD-373 Material and labour for Removal of old existing unsv foam cusion with tapestry cover of back of sofa set 5 seater and Supply and fix 100mm thick and 40 density PU foam cushion of Make - Kurl-on/ Sleepwell/ Springwell of size 535mmx560mm covered with best quality cora cloth and tapestry cloth of Make : D'Decor / Vivid Collection/ Bombay Dying of approved shade by Engg-in-Charge/GE duly stitched with nylon zip on one side complete all as per measurements specified and shown on drawings and as directed by Engg-in-Charge. Ref Drg No FD-281,373
(Note: Each set contains 5 nos of back)
50
-
-
... More
TABLE CENTRE FD-235 & 274 Removing old unserviceable Top of Table Centre and Supply and fix new top of size 900mmx450mm made of 18mm thick prelaminated MDF board (approved shade by GE) exterior grade, ISI marked of Make : Century Ply/ Kit Ply/ Green ply with 18mm x 4mm thick teak wood edging alround duly polished the teakwood edging complete all as per measurements specified and shown on drawings and as directed by Engg-in-Charge.
50
-
-
... More
TABLE CENTRE FD-235 & 274 Removing old unserviceable top long rail of Table Centre and Supply and fix well seasoned teak wood new long rail of size 20mmx50mmx900mm complete all as per measurements specified and shown on drawings and as directed by Engg-in-Charge.
25
-
-
... More
TABLE CENTRE FD-235 & 274 Removing old unserviceable top short rail of Table Centre and Supply and fix well seasoned teak wood new short rail of size 20mmx50mmx450mm complete all as per measurements specified and shown on drawings and as directed by Engg-in-Charge.
20
-
-
... More
TABLE CENTRE FD-235 & 274 Removing old unserviceable legs of Table Centre and Supply and fix well seasoned teak wood new leg of size 60mmx30mmx400mm complete all as per measurements specified and shown on drawings and as directed by Engg-in-Charge.
30
-
-
... More
TABLE CENTRE FD-235 & 274 Removing old unserviceable bottom rail of Table centre and Supply and fix well seasoned teak wood new bottom rail of size 20mmx50mmx450mm complete all as per measurements specified and shown on drawings and as directed by Engg-in-Charge.
25
-
-
... More
TABLE CENTRE FD-235 & 274 Removing old unserviceable stiffner of Table centre and Supply and fix well seasoned teak wood new stiffner of size 20mmx50mmx450mm complete all as per measurements specified and shown on drawings and as directed by Engg-in-Charge.
20
-
-
... More
TABLE CENTRE FD-235 & 274 Removing old unserviceable PVC rings of Table Centre and Supply and fix new PVC rings of size 20mm dia of best quality fixed with screw complete all as per measurements specified and shown on drawings and as directed by Engg-in-Charge.
200
-
-
... More
TABLE CENTRE FD-235 & 274 Material and labour for 2 coats of french polish over a coat of wood primer to new part and 02 coat of french polish of approved shade to entire surface complete to Table Centre complete all as per measurements specified and shown on drawings and as directed by Engg-in-Charge.
50
-
-
... More
TABLE DINING 6/8 PERSONS FD-239 & 273 Removing old unserviceable Top of Table Dining 6 Pers and Supply and fix new top complete of size 1500mm(L) x 900mm (W) suitable for table dinging 6 pers shall be made of 18mm thick prelaminated MDF board (approved shade by GE) exterior grade, ISI marked of Make : Century Ply/ Kit Ply/ Green ply with 18mm x 4mm thick teak wood edging alround duly polished the teakwood edging complete all as per measurements specified and shown on drawings and as directed by Engg-in-Charge.
20
-
-
... More
TABLE DINING 6/8 PERSONS FD-239 & 273 All as items No11.01 here-in-before but overall size 1800mm(L) x 900 mm (W) for table dining 8 persons complete all as per measurements specified and shown on drawings and as directed by Engg-in-Charge.
20
-
-
... More
TABLE DINING 6/8 PERSONS FD-239 & 273 Removing old unserviceable top long rail of Table Dining 6 Pers and Supply and fix well seasoned teak wood new long rail of size 25mmx100mmx1500mm complete all as per measurements specified and shown on drawings and as directed by Engg-in-Charge.
16
-
-
... More
TABLE DINING 6/8 PERSONS FD-239 & 273 Removing old unserviceable top long rail of Table Dining 8 Pers and Supply and fix well seasoned teak wood new long rail of size 25mmx100mmx1800mm complete all as per measurements specified and shown on drawings and as directed by Engg-in-Charge.
20
-
-
... More
TABLE DINING 6/8 PERSONS FD-239 & 273 Removing old unserviceable top short rail of Table Dining 6/8 Pers and Supply and fix well seasoned teak wood new short rail of size 25mmx100mmx900mm complete all as per measurements specified and shown on drawings and as directed by Engg-in-Charge.
8
-
-
... More
TABLE DINING 6/8 PERSONS FD-239 & 273 Removing old unserviceable legs of Table Dining 6/8 Pers and Supply and fix well seasoned teak wood new leg of size 75mmx40mmx760mm complete all as per measurements specified and shown on drawings and as directed by Engg-in-Charge.
12
-
-
... More
TABLE DINING 6/8 PERSONS FD-239 & 273 Removing old unserviceable wooden brackets of Table Dining 6/8 Pers and Supply and fix new well seasoned teak wood brackets of size 50mmx50mmx25mm complete all as per measurements specified and shown on drawings and as directed by Engg-in-Charge.
160
-
-
... More
TABLE DINING 6/8 PERSONS FD-239 & 273 Removing old unserviceable PVC rings of Table Dining 6/8 Pers and Supply and fix new PVC rings of size 25mm dia of best quality fixed with screw complete all as per measurements specified and shown on drawings and as directed by Engg-in-Charge.
160
-
-
... More
TABLE DINING 6/8 PERSONS FD-239 & 273 Material and labour for 2 coats of french polish Make : Asian/ Berger/ Nerolac over a coat of wood primer to new part and 02 coat of french polish of approved shade to entire wood surface complete to Table Dining 6/8 Pers complete all as per measurements specified and shown on drawings and as directed by Engg-in-Charge.
40
-
-
... More
TABLE WITH/WITHOUT DRAWER (900mm x 600mm x 760mm) FD-283,FD-284 Remove unsv top of TABLE (900mmX600mmX760mm) and Supply & fix table new top of size 900mmx600mm made up of 18mm thick prelaminated MDF board (approved shade by GE)exterior grade, ISI marked of Make : Century Ply/ Kit Ply/ Green ply with 18mm x 4mm thick teak wood edging alround duly polished the teakwood edging complete all as per measurements specified and shown on drawings and as directed by Engg-in-Charge.
20
-
-
... More
TABLE WITH/WITHOUT DRAWER (900mm x 600mm x 760mm) FD-283,FD-284 Remove unsv leg of TABLE (900mmX600mmX760mm) and Supply & fix well seasoned hard wood (teak)leg of size 60mm x 30mm x 760mm long complete all as per measurements specified and shown on drawings and as directed by Engg-in-Charge.
18
-
-
... More
TABLE WITH/WITHOUT DRAWER (900mm x 600mm x 760mm) FD-283,FD-284 Remove unsv / broken knob and Supply and fix round stain less steel knob of 40mm of make: ABC or equivalent as approved by GE complete all as per measurements specified and shown on drawings and as directed by Engg-in-Charge.
10
-
-
... More
TABLE WITH/WITHOUT DRAWER (900mm x 600mm x 760mm) FD-283,FD-284 Remove unsv top rail of TABLE and Supply and fix well seasoned hard wood (teak) top rail of size 110mm x 20mm x 900mm complete all as per measurements specified and shown on drawings and as directed by Engg-in-Charge.
10
-
-
... More
TABLE WITH/WITHOUT DRAWER (900mm x 600mm x 760mm) FD-283,FD-284 Remove unsv top rail of TABLE and Supply and fix well seasoned hard wood (teak) top rail of size 110mm x 20mm x 600mm complete all as per measurements specified and shown on drawings and as directed by Engg-in-Charge.
8
-
-
... More
TABLE WITH/WITHOUT DRAWER (900mm x 600mm x 760mm) FD-283,FD-284 Remove unsv drawer and Supply and fix new drawer complete made out of 12mm thick plywood using stiffner etc complete all as per measurements specified and shown on drawings and as directed by Engg-in-Charge.
10
-
-
... More
TABLE WITH/WITHOUT DRAWER (900mm x 600mm x 760mm) FD-283,FD-284 Remove broken pvc shoes and Supply & fix PVC shoes of size 25mm dia of best quality complete all as per measurements specified and shown on drawings and as directed by Engg-in-Charge.
80
-
-
... More
TABLE WITH/WITHOUT DRAWER (900mm x 600mm x 760mm) FD-283,FD-284 Material and labour for polishing of 2 coats of french polish to entire table complete all as per measurements specified and shown on drawings and as directed by Engg-in-Charge.
20
-
-
... More
TABLE WRITING FD-249, 275 Removing old unserviceable top of Table Writing and Supply and fix new Top of size1145mmx600mm made of made up of 18mm thick prelaminated MDF board (approved shade by GE) exterior grade, ISI marked of Make : Century Ply/ Kit Ply/ Green ply with 18mm x 4mm thick teak wood edging alround duly polished the teakwood edging complete all as per measurements specified and shown on drawings and as directed by Engg-in-Charge.
15
-
-
... More
TABLE WRITING FD-249, 275 Removing old unserviceable Leg of Table Writing and Supply and fix new leg of size 55mmx35mmx760mm of well seasoned teak wood complete all as per measurements specified and shown on drawings and as directed by Engg-in-Charge.
12
-
-
... More
TABLE WRITING FD-249, 275 Removing old unserviceable Top rail long of Table Writing and Supply and fix new rail of size 25mmx50mmx1145 of well seasoned teak wood complete all as per measurements specified and shown on drawings and as directed by Engg-in-Charge.
8
-
-
... More
TABLE WRITING FD-249, 275 Removing old unserviceable Top rail small of Table Writing and Supply and fix new rail of size 25mmx50mmx600mmof well seasoned teak wood complete all as per measurements specified and shown on drawings and as directed by Engg-in-Charge.
8
-
-
... More
TABLE WRITING FD-249, 275 Removing old unserviceable PVC rings of Table Writing and Supply and fix new PVC rings of 25mm dia of best quality as approved fixed with screw complete all as per measurements specified and shown on drawings and as directed by Engg-in-Charge.
60
-
-
... More
TABLE WRITING FD-249, 275 Removing old & u/s sides, back of drawer from table writing and S/F new sides, bottom, back of drawers of existing shape,size made out of 12mm thick plywood BWR Gde ISI marked of Make:kit Ply/ Green Ply/Century Ply complete all as per measurements specified and shown on drawings and as directed by Engg-in-Charge.
10
-
-
... More
TABLE WRITING FD-249, 275 Removing old & u/s front of drawer from table writing and S/F new front of drawer made out of 18mm thick plywood BWR Gde ISI marked of Make :kit Ply/ Green Ply/Century Ply of existing shape,size complete all as per measurements specified and shown on drawings and as directed by Engg-in-Charge.
8
-
-
... More
TABLE WRITING FD-249, 275 Removing old & u/s bottom of drawers from Table writing and S/F new bottom of drawers of existing shape,size made out of 6mm thick plywood BWR Gde ISI marked of Make:kit Ply/ Green Ply/Century Ply complete all as per measurements specified and shown on drawings and as directed by Engg-in-Charge.
8
-
-
... More
TABLE WRITING FD-249, 275 Removing old unserviceable Stiffner Long of Table Writing and Supply and fix new well seasoned teak wood Stiffner Long of size 25mmx50mmx1145mm complete all as per measurements specified and shown on drawings and as directed by Engg-in-Charge.
9
-
-
... More
TABLE WRITING FD-249, 275 Removing old unserviceable Stiffner small of Table Writing and Supply and fix new well seasoned teak wood Stiffner small of size 600mmx25mmx50mm complete all as per measurements specified and shown on drawings and as directed by Engg-in-Charge.
7
-
-
... More
TABLE WRITING FD-249, 275 Taking down old & u/s door shutter from table writing and Supply and fix new door shutters of existing size all as per drg made out of prelaminated MDF board (approved shade by GE) exterior grade, ISI marked of Make : Century Ply/ Kit Ply/ Green ply with 18mm x 4mm thick teak wood edging alround the shutter of existing shape, size complete all as per measurements specified and shown on drawings and as directed by Engg-in-Charge.
8
-
-
... More
TABLE WRITING FD-249, 275 Removing old unsv/ broken handle from door shutter and drawers and S/F new stainless steel handle of make: JWL/ ATLANTIC/ AMAR Enterprisesas per sample approved by Engg-in-Charge for shutters and knobs for drawers of make: Himalaya craft/indian shelf/ LAPO as per sample complete all as per measurements specified and shown on drawings and as directed by Engg-in-Charge.
10
-
-
... More
TABLE WRITING FD-249, 275 Removing old unsv/ broken hinges from shutter and S/F new piano type continuous hinges of size 20-25mm wide of Make: Generic or equivalent sample as approved by Engg-in-charge for Door shutter complete all as per measurements specified and shown on drawings and as directed by Engg-in-Charge.
8
-
-
... More
TABLE WRITING FD-249, 275 All existing exposed to view surfaces of plywood used in table writing of existing shape, size shall be covered with 4mm thick vineer sheet complete all as per measurements specified and shown on drawings and as directed by Engg-in-Charge. Make of veneer sheet : Century ply/Green Ply/kit Ply.
10
-
-
... More
TABLE WRITING FD-249, 275 Material and labour for 02 coats of French polishing of approved shade to entire surface of table writing complete all as per measurements specified and shown on drawings and as directed by Engg-in-Charge.
15
-
-
... More
TEAPOY FD-232 ,278, 382 Removing old unserviceable Top of Teapoy and Supply and fix new top complete of size600mmx450mm made of 18mm thick prelaminated MDF board (approved shade by GE) exterior grade, ISI marked of Make : Century Ply/ Kit Ply/ Green ply with 18mm x 4mm thick teak wood edging alround duly polished the teakwood edging complete all as per measurements specified and shown on drawings and as directed by Engg-in-Charge.
25
-
-
... More
TEAPOY FD-232 ,278, 382 Removing old unserviceable top long rail of Teapoy and Supply and fix well seasoned teak wood new long rail of size 20mmx50mmx600mm complete all as per measurements specified and shown on drawings and as directed by Engg-in-Charge.
12
-
-
... More
TEAPOY FD-232 ,278, 382 Removing old unserviceable top short rail of Teapoy and Supply and fix well seasoned teak wood new short rail of size 20mmx50mm450mm complete all as per measurements specified and shown on drawings and as directed by Engg-in-Charge.
15
-
-
... More
TEAPOY FD-232 ,278, 382 Removing old unserviceable legs of Teapoy and Supply and fix well seasoned teak wood new leg of size 60mmx30mm540mm complete all as per measurements specified and shown on drawings and as directed by Engg-in-Charge.
30
-
-
... More
TEAPOY FD-232 ,278, 382 Removing old unserviceable bottom rail of Teapoy and Supply and fix well seasoned teak wood new bottom rail of size 20mmx50mmx450mm complete all as per measurements specified and shown on drawings and as directed by Engg-in-Charge.
15
-
-
... More
TEAPOY FD-232 ,278, 382 Removing old unserviceable PVC rings of Teapoy and Supply and fix new PVC rings of 20mm dia of best quality fixed with screw complete all as per measurements specified and shown on drawings and as directed by Engg-in-Charge.
100
-
-
... More
TEAPOY FD-232 ,278, 382 Material and labour for 2 coats of french polish Make : Asian /Berger / Nerolacover a coat of wood primer to new part and 02 coat of french polish of approved shade to entire surface complete to Teapoy complete all as per measurements specified and shown on drawings and as directed by Engg-in-Charge.
25
-
-
... More
ALMIRAH LARGE STEEL WITH SHELVES FD-1031
Dismantling the following old unserviceable/damaged part and replace/fix the same with new part to match with the existing item as per Drg for 3 way locking assembly system for almirah large steel suitable for almirah complete all as per measurements specified and shown on drawings and as directed by Engg-in-Charge.
60
-
-
... More
Lock : New Lock should be of 65mm, 6 lever complete all as per measurements specified and shown on drawings and as directed by Engg-in-Charge. Make: Godrej/Harrison/Mortice .
Ref Drg No FD- 1031
60
-
-
... More
Cleat : New cleat should be of size 40mm x 25mm x1mm thick steel complete all as per measurements specified and shown on drawings and as directed by Engg-in-Charge.
80
-
-
... More
CP handle: 100mm long complete all as per measurements specified and shown on drawings and as directed by Engg-in-Charge. Make SOMA/S.CEE
60
-
-
... More
Material and labour for Preparation of old painted steel surface of the Almirah Large Steel including shelves by removing all dents filling with putty and spray painting with 2 coats synthetic enamel paint in dual colour of Make: Berger/ Asian/ Shalimar paints of approved shade/Colour by GE over external & internal surfaces of Almirah large steel complete all as per measurements specified and shown on drawings and as directed by Engg-in-Charge.
60
-
-
... More
ALMIRAH MEDIUM STEEL WITH SHELVES FD-1032
Dismantling the following old unserviceable/damaged part and replace/fix the same with new part to match with the existing one for 3 way locking assembly system for almirah med steel suitable for almirah complete all as per measurements specified and shown on drawings and as directed by Engg-in-Charge.
90
-
-
... More
Lock : New Lock should be of brass, 65mm, 6 lever complete all as per measurements specified and shown on drawings and as directed by Engg-in-Charge. Make Godrej/Harrison/Mortice
90
-
-
... More
CP handle 100mm long : complete all as per measurements specified and shown on drawings and as directed by Engg-in-Charge. Make SOMA/S.CEE
90
-
-
... More
Material and labour for Preparation of old painted steel surface of the Almirah Medium Steel including shelves by removing all dents filling with putty and spray painting with 2 coat synthetic enamel paint in dual colour of Make: Berger/ Asian/ Shalimar paints of approved shade/Colour by GE over external & internal surfaces of Almirah med steel complete all as per measurements specified and shown on drawings and as directed by Engg-in-Charge.
90
-
-
... More
BED HARD STEEL w/o MNF (FD/E6/MAP/08 R) Material and labour for removing old broken / unserviceable Prelaminated particle board of head board of Bed Hard and Supply and fix new 18mm thick Prelaminated particle board Make: KIT Ply/ century Ply/ Green Ply of approved shade of size 634mm x196mm screwing through MS Angle Iron cleat with 18mmx4mm thick teak wood beading alround the edges of particle board complete all as per measurements specified and shown on drawings and as directed by Engg-in-Charge.
40
-
-
... More
BED HARD STEEL w/o MNF (FD/E6/MAP/08 R) Material and labour for removing old broken / unserviceable Prelaminated particle board of foot board of Bed Hard and Supply and fix new 18mm thick Prelaminated particle board Make: KIT Ply/ century Ply/ Green Ply of approved shade of size 638mm x314mm screwing through MS Angle Iron cleat with 18mmx4mm thick teak wood beading alround the edges of particle board complete all as per measurements specified and shown on drawings and as directed by Engg-in-Charge.
40
-
-
... More
BED HARD STEEL w/o MNF (FD/E6/MAP/08 R) Material and labour for removing old broken / unserviceable Ply top of Bed Hard steel and Supply and fix new ply top of 12 mm thick of size 1974mmx850mm BWR Grade as per IS-303 approved specification of Make: KIT Ply/ Century Ply/ Green Ply with fixing in position all as shown on drg with suitable size screws & cup washers complete all as per measurements specified and shown on drawings and as directed by Engg-in-Charge.
50
-
-
... More
BED HARD STEEL w/o MNF (FD/E6/MAP/08 R) Material and labour for preparation of old steel surface of bed hard by scraping /rusting /denting and applying 2 coats of synthetic enamel paint of colour black in shade of Make: Berger/ Shalimar/ Nerolac/Asian with spary Gun machine complete all as per measurements specified and shown on drawings and as directed by Engg-in-Charge.
50
-
-
... More
BED HARD STEEL w/o MNF (FD/E6/MAP/08 R) Supply & Fix 3mm thick PVC shoes to the legs of Bed Hard Steel complete all as per measurements specified and shown on drawings and as directed by Engg-in-Charge.
120
-
-
... More
BOOK CASE STEEL FD1028 Removing the existing unserviceable/Broken glass for Shutter and Supply and fix Plain glass 3mm thick of size 280mmx 720mm complete all as per measurements specified and shown on drawings and as directed by Engg-in-Charge.
160
-
-
... More
BOOK CASE STEEL FD1028 Removing the existing unserviceable handle and supply and fix steel handle 100mm long for 'Book Case steel' complete all as per measurements specified and shown on drawings and as directed by Engg-in-Charge.
140
-
-
... More
BOOK CASE STEEL FD1028 Removing the existing unserviceable lock and supply and fix new brass lock with keys in duplicate suitable for shutter of Book case steel complete all as per measurements specified and shown on drawings and as directed by Engg-in-Charge.
240
-
-
... More
BOOK CASE STEEL FD1028 Material and labour for preparation of entire old painted steel surfaces of ‘Book case steel’ and applying two coats of synthetic enamel paint internally and externally complete all as per measurements specified and shown on drawings and as directed by Engg-in-Charge.
153
-
-
... More
CHAIR TUBULAR STEEL WITH ARMS FD-75(M)
Material and labour for removal of old broken seat and Supply and fix new Seat frame made out of well seasoned Hard wood (Teak) of size 535mmx560mmx30mm for chair with arms, finished with 02 coat of synthetic enameled paint black colour of Make:Berger/ Asian/ Shalimar and canned with 2mm wide 1/2 round and 0.4mm thick white cane of make Premier/Mharashtra Co/Shah woven in Godrej pattern. Frame of seat shall be fixed with chair with 4 Nos machine made nuts , bolts with washer providing hole in the pipe and seat frame complete all as per measurements specified and shown on drawings and as directed by Engg-in-Charge.
70
-
-
... More
CHAIR TUBULAR STEEL WITH ARMS FD-75(M) All as per item no 14.01 here-in-before but for back complete all as per measurements specified and shown on drawings and as directed by Engg-in-Charge.
70
-
-
... More
CHAIR TUBULAR STEEL WITH ARMS FD-75(M) Material and labour for removal of old unsv MS strip and Supply and fix 02 Nos New MS strip (Flat Iron ) shall be 3mm thick, 20mm wide and length 535mm for Chair with arms, to be welded to the steel tube at the both ends to provide support to seat and back of chairs complete all as per measurements specified and shown on drawings and as directed by Engg-in-Charge.
140
-
-
... More
CHAIR TUBULAR STEEL WITH ARMS FD-75(M) Material and labour for removal of old broken /unsv wooden Arms and Supply and fix new arms must be made well seasoned Hard wood (Teak) of size 300mmx50mmx25mm, finished with 02 coat of synthetic enameled paint of black colour of Make:Berger/ Asian/ Shalimar made to shape and size all as shown on drg, must be fixed with full threaded screw of appropriate size to Chair steel with Arms complete all as per measurements specified and shown on drawings and as directed by Engg-in-Charge.
80
-
-
... More
CHAIR TUBULAR STEEL WITH ARMS FD-75(M) Supply and fix Hard Rubber Shoes 25mm dia (Best quality as approved) for bottom of the legs to Chair steel with arms and Chair steel without Arms complete all as per measurements specified and shown on drawings and as directed by Engg-in-Charge.
140
-
-
... More
CHAIR TUBULAR STEEL WITH ARMS FD-75(M) Preparation of old painted steel surface of the Chair steel with arms and chair steel W/O Arms by removing all dents filling with putty, grinding, rusting and shall be apply spray painting with 2 coat of smoke gray synthetic enamel paint of Make: Berger/ Shalimar/ Asian over a coat of steel primer complete all as per measurements specified and shown on drawings and as directed by Engg-in-Charge.
70
-
-
... More
CHAIR VERANDAH FD-19(m), 259,256 Material and labour for Re-canning seat & back of chair verandah with 1st class plastic cane 4mm wide make: Shah/ premier/ Marcane/ Maharastra co; white colour in matt pattern and applying one coat of synthetic enamel paint white to complete chair before re-canning complete all as per measurements specified and shown on drawings and as directed by Engg-in-Charge.
230
-
-
... More
CHAIR VERANDAH FD-19(m), 259,256 Material and labour for preparation of old painted surface of Chair Verandah by scraping, denting, derusting etc and applying one coat of synthetic enamel paint (White in colour) by spray painting to Chair Verandah complete all as per measurements specified and shown on drawings and as directed by Engg-in-Charge.
230
-
-
... More
CHAIR VERANDAH FD-19(m), 259,256 Material and labour for Remove unsrv MS rod and Supply and fix New MS Rod of 10mm dia ,460mm long with gas welding duly painted with white synthetic enamel paint of Make: Berger / Asian / Nerolac after pre treated with steel primer complete all as per measurements specified and shown on drawings and as directed by Engg-in-Charge.
50
-
-
... More
CHAIR VERANDAH FD-19(m), 259,256 Material and labour for Cutting and removing unserviceable legs of chair verandah and providing new leg portion of MS conduit tube 20 gauge 1.6mm thick fixing with gas welding complete all as per measurements specified and shown on drawings and as directed by Engg-in-Charge.
60
-
-
... More
CHAIR VERANDAH FD-19(m), 259,256 Material and labour for Remove old unsv PVC Toe of Chair Verandah and Supply and fix New PVC Toe of best quality for bottom of the legs of Chair verandah complete all as per measurements specified and shown on drawings and as directed by Engg-in-Charge.
600
-
-
... More
CHAIR WRITING FD/E6/MAP/12 Material and labour for removing of old unsv complete seat and Supply and fix new complete seat all as per measurement specified in Drg made up of 100mm thick PU foam 32 density of make: sleep well / curl on /sring well covered with tapestry cloth of make: Ddecor/ bombay dyeing/ vivid collection of approved shade upholstered on 120mm thick commercial pltwood with PVC lipping all round complete all as per measurements specified and shown on drawings and as directed by Engg-in-Charge.
50
-
-
... More
CHAIR WRITING FD/E6/MAP/12 ditto all as per item sl No 16.01 herein before but for back of chair writing complete all as per measurements specified and shown on drawings and as directed by Engg-in-Charge.
50
-
-
... More
CHAIR WRITING FD/E6/MAP/12 Removing of old unsv P U handle and Supply and fix new handle complete all as per measurements specified and shown on drawings and as directed by Engg-in-Charge.
60
-
-
... More
CHAIR WRITING FD/E6/MAP/12 Material and labour for Preparation of old painted steel surface of the chair writing and spray painting with 2 coats of black synthetic enamel paint of Make: Berger/ Asian/ Shalimar paints after treatment of powder coating on steel surfaces complete all as per measurements specified and shown on drawings and as directed by Engg-in-Charge.
50
-
-
... More
CHAIR WRITING FD/E6/MAP/12 Removing of old unsv rubber stopper and Supply and fix new rubber stopper complete all as per measurements specified and shown on drawings and as directed by Engg-in-Charge.
200
-
-
... More
Charpoy Nylon newar/Hard Top FD-220 : Material and labour for removal of old broken/ unsv nylon newar of charpoy GI pipe and supply & fix new 12 mm thick BWR grade ply of size 1980mmx900mm as per IS-303 approved specification of Make: KIT PLY/ Century Ply/ Archid ply on cleats . Cleats : Supply and fix 02 Nos cleats of iron angle of size 25mmx25mmx5mm, 50mm long on each long rails and 02 Nos cleats on each short rails duly running welding on approprite position as directed by Engr-in-Charge including drilling hole in each cleats duly painted with synthetic enameled paint black colour over a coat of red oxided primer. Flat iron strip : Supply and fix 02 Nos new Flat iron strip for each charpoy of size 900mmx30mmx5mm thick duly welded to each charpoy on two long rails togather on appropriate position of charpoy with providing new nut & bolts with washer including providing Edges of Ply should be prepared with putty for moisture resistance. New Flat Iron strip shall be painted with synthetic enameled paint in black colour over a coat of red oxided primer. Corners of plywood top should be rounded off properly before fixing on charpoy complete all as per measurements specified and shown on drawings and as directed by Engg-in-Charge.
200
-
-
... More
Charpoy Nylon newar/Hard Top FD-220 : All as per item No 17.01 here-in-before but for charpoy GI Pipe with Hard Top complete all as per measurements specified and shown on drawings and as directed by Engg-in-Charge.
100
-
-
... More
TABLE BED SIDE FD/E6/MAP/15RRemoving of old u/s top from Table bed side and Supply and fix new top of existing shape,size made out of 18mm thick Prelaminated MDF board of Make : Kit Ply/ Green Ply/Century Ply with teak wood beading alround the top complete all as per measurements specified and shown on drawings and as directed by Engg-in-Charge.
60
-
-
... More
TABLE BED SIDE FD/E6/MAP/15R Removing of old u/s back from table bed side and Supply and fix new back of existing shape,size made out of 6mm thick plywood BWR Grade of Make : Kit Ply/ Green Ply/Century Ply complete all as per measurements specified and shown on drawings and as directed by Engg-in-Charge.
60
-
-
... More
TABLE BED SIDE FD/E6/MAP/15R Removing of old u/s sides from table bed side and Supply and fix new sides of existing shape,size made out of 18mm thick Prelaminated MDF board of Make : Kit Ply/ Green Ply/Century Ply with teak wood beading alround the top complete all as per measurements specified and shown on drawings and as directed by Engg-in-Charge.
90
-
-
... More
TABLE BED SIDE FD/E6/MAP/15RRemoving old unsv/ broken handle from drawers and S/F new 100mm long stainless steel handle complete all as per measurements specified and shown on drawings and as directed by Engg-in-Charge. Make: JWL/ ATLANTIC/ AMAR Enterprises
90
-
-
... More
TABLE BED SIDE FD/E6/MAP/15RRemoving old & u/s sides of drawers from Table bed side and S/F new sides of drawers of existing shape,size made out of 12mm thick plywood BWR Gd ISI marked complete all as per measurements specified and shown on drawings and as directed by Engg-in-Charge. Make:Kit Ply/ Green Ply/Century Ply.
70
-
-
... More
TABLE BED SIDE FD/E6/MAP/15RRemoving old unsv/ broken hard rubber toe from Table bed side and S/F new hard rubber toe of best quality complete all as per measurements specified and shown on drawings and as directed by Engg-in-Charge.
240
-
-
... More
TABLE BED SIDE FD/E6/MAP/15R Entire Iron surfaces of Table Bed Side expose to view shall be 02 coats of black paint complete all as per measurements specified and shown on drawings and as directed by Engg-in-Charge. Make : Asian/Berger/Shalimar
60
-
-
... More
TABLE COMPUTER TP Removing the unserviceable table top supply and fix new top made out of pre-laminated particel board of size 1070 x 750mm duly poviding 4mm wooden beading duly polished complete all as per measurements specified and shown on drawings and as directed by Engg-in-Charge.
30
-
-
... More
TABLE COMPUTER TP Removing the unserviceable telescopic channels of pull out tray/drawer & supply and fix new telescopic channel as per existing size and complete all as per measurements specified and shown on drawings and as directed by Engg-in-Charge.
50
-
-
... More
TABLE COMPUTER TP Removing the unserviceable key board supply and fix new key board made out of pre-laminated particel board of size 450 x 480mm duly poviding PVC beading and complete all as per measurements specified and shown on drawings and as directed by Engg-in-Charge.
40
-
-
... More
TABLE COMPUTER TP Removing the unserviceable Rectangular PVC cover and supply and fix new Rectangular PVC cover of size 25x50mm complete all as per measurements specified and shown on drawings and as directed by Engg-in-Charge.
50
-
-
... More
TABLE COMPUTER TP Removing the unserviceable side Verticle board of table computer and supply and fix new side verticle board of size 230x450mm made out of pre-laminated particle board 18mm thick complete all as per measurements specified and shown on drawings and as directed by Engg-in-Charge.
20
-
-
... More
TABLE CONFERANCE/LIBRARY STEEL FD1001
Material and labour for removing existing table top and Supply and fix pre-laminated particle board top of size 2135x1065x19mm thick of exterior grade, teak veneer finish on one side balancing white on other side and with 40x6mm teak wood edging around the top duly treated with polishing and removing the existing unserviceable broken top complete all as per measurements specified and shown on drawings and as directed by Engg-in-Charge.
50
-
-
... More
TABLE CONFERANCE/LIBRARY STEEL FD1001 Preparation of old painted steel surface of the Table Conferance / Table Library by removing all dents filling with putty, grinding, rusting and shall be apply spray painting with 2 coat of smoke gray synthetic enamel paint complete all as per measurements specified and shown on drawings and as directed by Engg-in-Charge. Make: Berger/ Shalimar/ Asian over a coat of steel primer
50
-
-
... More
TABLE OFFICE CLERK STEEL (FD-84/1004)
Removing the existing unserviceable/broken top of table office clerk steel and Supply & Fix new table top of size1200x600mm made up of 18mm thick Prelaminated MDF board bonded with teak wood edging all round duly polishing to edging complete all as per measurements specified and shown on drawings and as directed by Engg-in-Charge.
30
-
-
... More
TABLE OFFICE CLERK STEEL (FD-84/1004)Removing the existing unserviceable lock and Supply & Fix new brass lock of make: Harrison/ Gogrej/ Link with duplicate keys suitable for drawers of table office clerk complete all as per measurements specified and shown on drawings and as directed by Engg-in-Charge.
30
-
-
... More
TABLE OFFICE CLERK STEEL (FD-84/1004) Removing the existing unserviceable /damaged drawer of table office clk steel and supply and fix new drawer complete all as per size shown in Drg made out of 18 gauge thick mild steel sheet including painting with two coats of synthetic enamel paint over a coat of red oxide primer by machine spray complete all as per measurements specified and shown on drawings and as directed by Engg-in-Charge.
45
-
-
... More
TABLE OFFICE CLERK STEEL (FD-84/1004)Material and labour for preparing the old steel surfaces of table office clerk and applying two coats of synthetic enamel paint by machine spray complete all as per measurements specified and shown on drawings and as directed by Engg-in-Charge.
30
-
-
... More
TABLE OFFICE OFFICERS STEEL (FD-84/1003) Removing the existing unserviceable/broken top of table office officer steel and Supply & Fix new table top of 1370x760mm of 18mm thick pre laminated MDF board bonded with teak wood edging all round duly polishing to edging complete all as per measurements specified and shown on drawings and as directed by Engg-in-Charge.
15
-
-
... More
TABLE OFFICE OFFICERS STEEL (FD-84/1003) Removing the existing unserviceable lock and Supply & Fix new brass lock of make: Harrison/ Gogrej/ Link with duplicate keys suitable for drawers of table office officers complete all as per measurements specified and shown on drawings and as directed by Engg-in-Charge.
30
-
-
... More
ditto all as per item sl No21.02 here in before but for cabinate of Table office Officers steel complete all as per measurements specified and shown on drawings and as directed by Engg-in-Charge.
30
-
-
... More
TABLE OFFICE OFFICERS STEEL (FD-84/1003) Removing the existing unserviceable /damaged drawer of table office officer steel and supply and fix new drawer complete all as per size shown in Drg made out of 18 gauge thick mild steel sheet including painting with two coats of synthetic enamel paint over a coat of red oxide primer by machine spray complete all as per measurements specified and shown on drawings and as directed by Engg-in-Charge.
90
-
-
... More
TABLE OFFICE OFFICERS STEEL (FD-84/1003) Material and labour for preparing the old steel surfaces of table office officers and applying two coats of synthetic enamel paint by machine spray complete all as per measurements specified and shown on drawings and as directed by Engg-in-Charge.
15
-
-
... More
Teapoy Verandah FD 255/383 Material and labour for removing the existing unsv top of Teapoy Verandah and Supply and fix 18mm thick pre-laminated particle board of size 900mm x 450mm with 4mm thick teak wood edging alround duly polishing to the teak wood edging and removing the existing unserviceable top complete all as per measurements specified and shown on drawings and as directed by Engg-in-Charge.
22
-
-
... More
Material and labour for preparing the old painted steel surfaces and painting of Teapoy Verandah with two coats of white synthetic enamel paint with machine spray and providing 4 Nos new plastic shoes for each Teapoy Verandah complete all as per measurements specified and shown on drawings and as directed by Engg-in-Charge.
22
-
-
... More
Table Student with D/Top TP Material and labour for removing the existing unsv top of Table Student with D/Top TP and Supply and fix 18mm thick pre-laminated particle board of size 900mm x 600mm with 4mm thick teak wood edging alround duly polishing to the teak wood edging and removing the existing unserviceable top complete all as per measurements specified and shown on drawings and as directed by Engg-in-Charge.
50
-
-
... More
Material and labour for preparing the old painted steel surfaces and painting of Table Student with D/Top TP with two coats of OG synthetic enamel paint with machine spray and providing 4 Nos new plastic shoes complete all as per measurements specified and shown on drawings and as directed by Engg-in-Charge.
50
-
-
... More
Material and labour for preparing the old wooden surfaces of any description, width or girth duly cleaning and applying two coats of polishing with glossy finish to the following furniture items complete all as per measurements specified and shown on drawings and as directed by Engg-in-Charge. :-
Book case Drawing No. FD 45,FD 237
13
-
-
... More
All as per Item No. 25 above, but Bed ply wood top with MNF. Drawing No. FD 246
240
-
-
... More
All as per Item No. 25 above, but Bed Hard Drawing No. FD/E6/MAP/01 (Cushion type)
67
-
-
... More
All as per Item No. 25 above, but Chair Dining. Drawing No. FD228,279,353, FD/MAP-II/04
430
-
-
... More
All as per Item No. 25 above, but All as per Item No. 25 above, but Chair Easy. Drawing No. FD229
101
-
-
... More
All as per Item No. 25 above, but Chair Writing. Drawing No. FD20,FD280
81
-
-
... More
All as per Item No. 25 above, but Hat stand w/mirror (small/large). Drawing No. FD 233,FD 361,FD362
80
-
-
... More
All as per Item No. 25 above, but Peg Table. Drawing No. FD236, 277, 384
137
-
-
... More
All as per Item No. 25 above, but Side board small/large. Drawing No. FD 26, 241,371,372
18
-
-
... More
All as per Item No. 25 above, but Sofa set 5 seater. Drawing No. FD 281,373,258, FD/MAP-II/02
73
-
-
... More
All as per Item No. 25 above, but Sofa set 4 seater. Drawing No. FD 281
5
-
-
... More
All as per Item No. 25 above, but Sofa set 2 seater.(2 Nos of Single Seater) Drawing No. FD 281
31
-
-
... More
All as per Item No. 25 above, but Stool dressing. Drawing No. FD 27,252,374
53
-
-
... More
All as per Item No. 25 above, but Table 3'x2' with/without drawer (900x600x760mm). Drawing No. 283, 284
55
-
-
... More
All as per Item No. 25 above, but Table bed side FD28,248,276
180
-
-
... More
All as per Item No. 25 above, but Table Centre. Drawing No. FD 29,235,274,232
41
-
-
... More
All as per Item No. 25 above, but Table dining 6 persons. Drawing No. FD 239, 30,273, FD/MAP-II/03
9
-
-
... More
All as per Item No. 25 above, but Table dining 8 persons. Drawing No. FD 376, 382,30,239,273
18
-
-
... More
All as per Item No. 25 above, but Table dressing gents. Drawing No. FD31, 230, 379
50
-
-
... More
All as per Item No. 25 above, but Table Dressing Ladies. Drawing No. FD32,378 & FD/MAP-II/07
50
-
-
... More
All as per Item No. 25 above, but Table writing. Drawing No. FD 33, 249,275
73
-
-
... More
All as per Item No. 25 above, but Teapoy. Drawing No. FD 34, 232, 278 & 382
120
-
-
... More
All as per Item No. 25 above, but Bin Soiled Linen. Drawing No. FD15, 244
21
-
-
... More
Material and labour for cleaning and preparing the old steel surfaces of any description, width or girth and applying two coats of synthetic enamel paint of approved colour with machine spray with glossy finish for the following items complete all as per measurements specified and shown on drawings and as directed by Engg-in-Charge. Almirah large steel w/Glass pans FD104
37
-
-
... More
All as per Item No. 48 above, but Almirah Large steel with shelves. Drawing No. FD 1031
19
-
-
... More
All as per Item No. 48 above, but Almirah large steel 1/2 H 1/2 S steel. Drawing No.FD/E6/MAP/18
75
-
-
... More
All as per Item No. 48 above, but Almirah Med steel with shelves. Drawing No. FD 67,243,350,1032
71
-
-
... More
All as per Item No. 48 above, but Almirah Steel 36"x24"x14" TP
24
-
-
... More
All as per Item No. 48 above, but BED HARD STEEL w/o MNF (FD/E6/MAP/08 R)
33
-
-
... More
All as per Item No. 48 above, but Ladder for loft FD238,44
35
-
-
... More
All as per Item No. 48 above, but Rack shoe steel. Drawing No.FD/E6/MAP/02R
57
-
-
... More
All as per Item No. 48 above, but Locker Unit of 6 steel TP FD127
20
-
-
... More
All as per Item No. 48 above, but Rack side steel 1830x760x1905mm FD129
10
-
-
... More
All as per Item No. 48 above, but Rack side steel 685x255x760mm TP
3
-
-
... More
All as per Item No. 48 above, but Rack Steel Slotted angle 5'x4' w/4 spaces FD 106
20
-
-
... More
All as per Item No. 48 above, but TABLE BED SIDE FD/E6/MAP/15R
51
-
-
... More
All as per Item No. 48 above, but Table Computer FD/E6/MAP/03
52
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%