Military Engineer Services Tender

Schedule 'A' Part III (DISMANTLING AND PROVN OF STEEL GATE AND MISCELLANEOUS ITEMS FOR PART-II) This Schedule is not prepriced by MES and the prepriced rate has not been indicated in column No 5 and shall be treated as Rs 0.00 indicates this fact only.The tenderer is required to quote their rates in Column 6.

Dismantling of structural work including doors, gates, but excluding framed truss etc., complete all as specified and as directed.

S & F Sheet metal enclosure MCB DB SPN 12 way with suitable rated bus bar 240 Volts double door with magnetic locking system complete all as specified.and directed.

S&F MCB, Single Pole Neutral (SPN) 40/63 Amps, 415 Volts of rupturing capactiy 10 KA, 'C' Series complete all as specified and as directed.

S&F MCB, Single Pole (SP), 6-32 Amps, 240 volts of rupturing capacity 10 KA, 'C' series complete all as specified and as directed.

S & F Wall mounted batten type LED light of 20/22 watts with aluminium extruded batten and system lumens of 2200 lm minimum with IP & surge protection alongwith driver efficiency 85% and power factor 0.95 , colour rendering index CRI80 along with integrated driver complete and connecting to the point wiring with necessary flexible copper conductor of multistrand three core of suitable length from fitting to the ceiling rose all as directed by Engineer-in-charge. Make: Philips Model BN021C LED22S or equivalent model in Havells/Wipro/GE.

S & F Linear canopy LED luminaire 40 Watts with extruded aluminum housing & polycarbonate diffuser designed and system lumens of 4000 lm with built in potted IP 67 constant current driver & surge protection alongwith driver efficiency 87% and power factor 0.95 , colour rendering index CRI80 along with integrated driver complete and connecting to the point wiring with necessary flexible copper conductor of multistrand three core of suitable length from fitting to the ceiling rose complete all as specified and directed.

S & F Linear canopy LED luminaire 80 Watts with extruded aluminum housing & polycarbonate diffuser designed and system lumens of 4000 lm with built in potted IP 67 constant current driver & surge protection alongwith driver efficiency 87% and power factor 0.95 , colour rendering index CRI80 along with integrated driver complete and connecting to the point wiring with necessary flexible copper conductor of multistrand three core of suitable length from fitting to the ceiling rose complete all as specified and directed.

S&F Round shape 12 Watt 220 Volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.

S&F 400 mm Wall Mounted Fan with double rotary string to regulate the speed complete and having speed of 1350 RPM with 55 watts of copper winding motor and accessories complete of 230 volts single pole to fix properly complete all as specified and directed by Engg in Charge. Make: Bajaj Esteem model of cat part No 250552 or equivalent model in Havells/USHA

Supply, install, testing and commissioning of Motorised Double Leaf Sliding gate (02 Nos) on both sides between RCC Columns as shown on drawing with following major accessories technical specification and Features :- - Gate made of mild steel with two coats of Polyurethane spray paint over one coat of epoxy primer - Inbuilt wicket gate of size - 1000mm (CW) x 1800mm (CH) - European Electromechanical actuator - Sonic 1500C - Three Station Push Button - Pair of Photocells with anodised aluminium vertical mountings. Additional accessories For Motorised Sliding Gate - Three station push button - Pair of Reverse Safety photocells - Rubber safety bar with infrared signal transmission system

TECHNICAL SPECIFICATIONS :- Gate type: Motorised Sliding Gate Mounting Surface: Bottom Rail : RCC Mounting Surface: Columns : RCC / M.S. Clear Height : 3000 mm Overall Width :17600 mm Clear Width :15200mm Number of Leaves : Two Opening Direction : Bidirectional Gate Design :- Pattern Standard :- Mild Steel hollow tubular section,torsion free fully welded unit Gate Frame 75mm * 75mm * 3.0mm M.S. pipe top horizontal & vertical profile 100mm * 75mm * 3.0mm M.S. pipe bottom horizontal profile. Inbuilt Wicket : Gate Inbuilt wicket gate of size - 1000mm (CW) x 1800mm (CH) Infills 75mm * 75mm * 3.0mm M.S. pipe vertical profile 50mm * 25mm * 2.5mm M.S. pipe vertical profile and the distance between inner vertical is approx 110mm 50mm * 25mm * 2.5mm M.S. pipe Diagonal Bracing as per approved by GE. The infills are to be fully welded between the upper and lower gate frame

Bottom Rail :- C channel & 20mm round polished bar Bottom Rollers Italian make Galvanised Wheels 120mm dia. with ball bearings and axle with lubrication point Guide Post : Full height Column :- Galvanised adjustable upper guide brackets with guide post constructed from a steel square hollow section of 150 x 75 x 3mm profile Guide Rollers :- Nylon Roller mounted on both side of column providing lateral support & smooth movement to the gate leaf. Safety post :- Safety strike with M.S. Post made of 100 x 50 x 3mm profile section on both ends Surface Finish :- Two coats of Polyurethane spray paint over one coat of epoxy primer Silver Similar to RAL 9006 / Grey Similar to RAL 7015 / Blue Similar to RAL 5010 / Orange Similar to RAL 2000

European Electromechanical actuator - Sonic 1500C Drive unit :- Rack driven rugged and powerful drive unit with integral electronic control unit :- Travel control system Control unit with limit switches to sense open & close positions Capacity :-1500 kg Duty Class :- Intensive use Working cycle :- 70% Power Supply Vac :- (Vdc) 230 (24) Absorption :- 0.9 A Torque max. :- 74 Nm Opening / Closing Speed :- 0.16 m/s Release system for manual opening :- Key operated Product dimensions :- 330 x 240 x 360 mm Rack :- Imported galvanized rack, duly hardened and tempered Control Switch :- Three Station Push Button Safety devices :- Pair of Photocells with anodised aluminium vertical mountings Flashing light

Additional Features :- CE marked according to the European Machinery Directive 2006/42/CE and type tested according to standard European Norm 13241-1 - Manual operation in case of power failure. - Highly compact dimensions & extremely silent operation. - Motor protected by internal thermal switch. Advance electronic control unit permits/allows operation time adjustment, partial opening, automatic closing, step by step control, stop safety, reverse safety. - MPS startup at maximum power permits motor to overcome any initial friction caused by ice, dust, etc.