Military Engineer Services Tender
For getting the details of etenders, if you are looking for information about them from the cumbersome government websites but are tired of doing so, Bidassist comes up with a one stop solution. It collates every Eproc telangana tender on Bidassist. One can approach it for the bidding process, registration process, etc., are explained below.
Military Engineer Services - MES Tender
Civil And Construction
Eprocure
Opening Date25 Sep 2024
Closing Date23 Oct 2024
Tender Amount₹ 4,06,00,000
Costs
EMD
₹ 4,81,000Document Cost
₹ 2,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_MES_676548_1Bid Award Id
ViewTender No
89080/E8Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Material and Labour for cleaning the top surface of roof with wire brush and washing with hydrochloric acid to remove dust, dirt, oil, grease, loose particles etc., applying evenly tack coat of industrial bitumen 85/25 at the rate of 1.2 Kg per Sqm over one coat of oil based bitumen emulsion primer at 0.40 Kg/sqm and provide water proofing treatment with membrane type water proofing method using APP modified prefabricated five layered water proofing membrane as per IS 16540-2017/ IS 16532-2017, matt finish, 3 mm thick and weighing not less than 3.6 kg/sqm reinforced with non woven polyester matt black weighing not less than 150 gm/Sqm having softening point not less than 140 degree Celsius, longitudinal tensile strength not less than 300 N/Sqm and torch application of membrane using gas burner with 150 mm overlap on side lap and end lap as per manufacturers instructions with top most layer of surface finished with two coats of solar reflective aluminium paint @ 0.10 Litre/Sqm per coat etc., complete all as specified and as directed. Notes: (i) The work shall be executed through Manufacturer's authorised applicator as approved by GE.
(ii) The quoted rate is deemed to include the cost of digital photograph and plaster plate as specified in PS.
300
-
-
Material and labour for making the grooves to 'V' section in existing parapet walls/columns over RCC roofs, cleaning out and tacking with polymeric membrane in to the grooves and sealed solidly with a hot mixture of bitumen and clean dry sand in the ratio of 1:1 by weight etc complete all as specified and directed.
170
-
-
Supply only Integral Water Proofing Compound conforming to IS 2645(2003) complete all as specified and as directed.
534
-
-
Dismantling asbestos cement (corrugated semi corrugated etc.) sheet / fibre sheets in roof covering etc complete all as specified and directed.
3415
-
-
Dismantling mangalore pattern roofing tiles single layer including ridge tiles laid, bedded in cement mortar etc complete all as specified and as directed.
1845
-
-
Dismantling of CGI/PGI sheet roofing any gauge and any thickness including ridge, valley gutter, wind ties etc complete all as specified and as directed.
1401
-
-
Dismantling battens for roof tiles any size exceeding 15cm in spacing complete all as specified and as directed.
1720
-
-
Dismantling timber fillets, rails, posts, rafters, purlins, etc. not esceeding 40 sq. cm in section, in framed work complete all as specified and as directed.
2800
-
-
Dismantling timber fillets, rails, posts, rafters, purlins, etc. not esceeding 40 sq. cm in section, in un-framed work complete all as specified and as directed.
180
-
-
Dismantling timber Scantling40 sqcm and over in section, in framed work, in any position, complete all as specified and as directed.complete all as specified and as directed.
25.55
-
-
Dismantling timber Scantling 40 sqcm and over in section, in un-framed work, in any position complete all as specified and as directed.complete all as specified and as directed.
5
-
-
Dismantling of wooden framed trusses of span n.exc 10 m complete all as specified and as directed.
45
-
-
Dismantling wrought iron or mild steel work of any description not otherwise provided for etc .complete all as specified and as directed.
22
-
-
Dismantling wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards / slabs / blankets any thickness including cover fillets etc complete all as specified and directed.
2890
-
-
Supply and Fix second class hardwood clean sawn timber scantling as in purlins, trusses etc framed work complete all as specified and as directed
6
-
-
Fixing only second class hardwood clean sawn timber scantling as in purlins, trusses etc framed work complete all as specified and as directed
4.4
-
-
Supply, fabricate and erection / fixing of Rolled mild steel sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates, conforming to Fe-410-W, Gde E-250, Quality A, complete all as specified and as directed.
17060
-
-
Supply and Fix Roof trusses (framed) and connecting plates, etc., (cut to ordinary lenghts i.e within 20mm of the length indicated of Fe 410-W ( Gde-E-250) quality A complete all as specified and as directed.
19160
-
-
Supply and Fix mild steel plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk forming holes, without any attachment etc.Roof strusses (framed) and connecting plates, etc., including necessary precautionary measures as in supports etc., as directed by the engr-in charge.
1084.2
-
-
Supply and fix hand rails, half rounded or other stock section or core for wooden hand rail straight portion, drilled and counter sunk for balusters, nosing to steps including embeding in concrete and screwing etc wind ties for roof including securing bolts, posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc, flat iron fillets (for securing wire mesh etc) including all necessary drilling or riveting etc and similar work confirming to Fe-290, Gde E-165 complete all as specified and as directed
3010
-
-
Supply and Fix Mild steel bolts.purpose made.with hexagonal orforming holes, without any attachment dia of neck exc 20mm not exc 25mm complete all as specified and directed.
480
-
-
Supply and fix Multi rib Trapezoidal Profiled Pre-painted galvalume aluminum zinc coated steel sheet 0.50mm thick (TCT) of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, cut as per site requirement, fixed with self drilling/self tapping screws with EPDM seal etc., complete all as per manufacturer's specifications and as directed.
6934
-
-
Supply and fix Pre-painted galvalume aluminum zinc coated steel sheet 0.50mm thick (TCT) of any colour having tensile strength of 550 Mpa as in ridge/ valley/ gutter/ hip profiles, cut as per site requirement, fixed with self drilling/self tapping screws with EPDM seal etc., complete all as per manufacturer's specifications and as directed.
483
-
-
Supply and Fix 4mm thick high pressure steam cured (HPSC) pre primed self designer textured non asbestos fibre cement building board laid/ inserted to aluminium frame work in false celings including aluminium anodised snap grid frame work of size 605 x 605mm with hangers 6 mm dia. G.I. (up to 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long etc., complete all as specified and as directed.
2987.5
-
-
Material and Labour for providing and fixing 10mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface / curved over 2nd class soft wood fillets, or metal frame work and reinforced with G.I. wire mesh complete all as specified and as directed.
Note Fillets/ metal frame work/ G.I. wire mesh shall be measured and paid separately under relevant items of this BoQ.
112.5
-
-
Material and labour Reinforced Cement Concrete (nominal mix) type B1 1:2:4 (using 20 mm graded aggregate) as inbeams, lintel beams/ bands and the like complete all as specified and as directed.
15.4
-
-
Material and labour for formwork to sides and soffits of floor or roof beams, beam haunhings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs,etc. also splays between floors and beams etc as in rough finished flat surfaces of concrete complete all as directed.
140
-
-
Material and labour for Providing precast cement concrete type B1 1:2:4 (20mm aggregate)in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain face set in cement mortar 1:4
0.55
-
-
Material and labour for Mild steel TMT bars of quality conforming to Fe-500D in reinforcement, 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.
1705
-
-
Material and labour for mild steel TMT bars 5mm dia and over upto and including 10mm dia as in stirrups, spacers and binders etc and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Fe-500D complete all as specified and as directed.
880
-
-
Demolition of brickwork or stone/boulder masonry, built in cement mortar with all quoins, arches, pillars, etc but excluding ashlar facings, dressed stone work and precast concrete articles including disposal of the rubbish out off the premises complete all as specified and as directed.
109
-
-
Material and labour for brick work with fly ash bricks old size, straight or curved on plan exceeding 6.0 metre mean radius, walls built in cement mortar 1:6 complete all as specified and as directed
16
-
-
Material and labour for stone walling of squared rubble masonry regular coursed, Secunderabad type, well bonded, bedded and solidly hearted, built in cement mortar 1:6 complete all as specified and as directed
82
-
-
All as per item No.36 here-in-before but except stones complete all as specified and directed. Note- Serviceable stones obtained vide demolition item above shall be reused after removing mortar and cleaning with water complete all as specifed and directed.
11
-
-
Taking down cement plaster of any description and thickness on brick walls including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed
2400
-
-
Material and Labour for rendering 10 mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces, finshed even and smooth without using extra cement complete all as specified and as directed
1000
-
-
Material and Labour for rendering 5 mm thick in CM 1:4 mixed with approved integral water proofing compound as per manufacturer's instructions over 10mm thick backing coat in CM 1:6 on fair faces of brick work or concrete surfaces, finished even and fair complete all as specified and as directed.
Note: Water proofing compound shall be measured and paid seperately under relevant item of this BoQ.
1600
-
-
Material and labour for rendering 5 mm thick in CM 1:3 on concrete surfaces such as ceiling or soffits of chajjas etc, finished even and smooth without using extra cement all as specified and as directed.
50
-
-
Material and labour for preparing newly plastered wall surfaces of walls and applying two coats of distemper oil emulsion over over alkali resistant primer over 3 mm thick wall care putty etc complete all as specified and as directed.
900
-
-
Material and Labour for preparing newly plastered wall surfaces and applying three coats of white wash complete all as specified and as directed.
100
-
-
Material and labour for complete removal of existing treatment on wall surfaces and applying two coats of oil bound distemper over a coat of alkali resistant primer over a coat of 3mm thick wall care putty etc all as specified and as directed.
4120
-
-
Material and Labour for preparing the old plastered or unplastered decorated surfaces of walls and applying two coats of white wash all as specified and as directed.
30
-
-
Material and labour for preparing newly plastered ceiling surfaces and applying three coats of white wash complete all as specified and as directed.
50
-
-
Material and labour for preparing old plastered ceiling surfaces and applying two coats of white wash complete all as specified and as directed.
200
-
-
Material and Labour for preparing newly plastered wall surfaces and applying two coats of cement paint over one coat of alkali resistant primer complete all as specified and as directed.
1500
-
-
Material and Labour for preparing newly plastered wall surfaces and applying two coats of exterior emulsion paint over one coat of alkali resistant primer complete all as specified and as directed.
100
-
-
Material and labour for preparing old decorated surafaces of walls, pillaster, etc. by washing with water, rubbing down, stoping and applying two coats of cement paint of any tint complete all as specified and as directed.
920
-
-
Demolition of PCC of any description and in any position not otherwise specifically provided for (un-reinforced) complete all as specified and directed.
94
-
-
Material and Labour for 75 mm thick PCC 1:3:6, type C1 (using 20mm graded stone aggregate) in plinth protection laid in alternative bays finished even and smooth without using extra cement including making 10 mm wide grooves to full depth at 3 m interval and at every change of direction and filling the grooves with mixture of bitumen and sand mixed in the ratio of 1:3 by weight and top 10 mm depth sealed with sealing compound grade ‘A’ complete all as specified and as directed
770
-
-
Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and as directed.
276
-
-
Dismantling floor hearth or wall tiling including cement mortar bedding, removing rubbish off the premises complete all as specified and directed.
1635
-
-
Material and Labour for 25mm thick cement concrete type B-0, 1:2:4 (using 12.50mm graded crushed stone aggregate) as floors, sub-floors etc and finishing surfaces of concrete topping as even & fair or even & rough to receive the topping layer all as specifed
4362
-
-
Material and labour for 1st quality coloured Vitrified tiles (light shade) 9 to 10 mm thick of size 600mmx600mm conforming to IS: 13712:2006 as in in floors, etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles, over & including 15mm thick screed bedding layer in CM 1:6 complete all as specified and directed.
1500
-
-
Material and labour for 1st quality coloured Vitrified tiles (light shade) 9 to 10 mm thick conforming to IS: 13712:2006 as in vertical surfaces such skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles, over & including 10mm thick backing coat in CM 1:4 complete all as specified and directed.
59
-
-
Material and labour for coloured Non Skid ceramic tiles of grade B-II(a), 7 to 8 mm thick (square/ rectangular), light coloured group, area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, laid in floors of pattern as approved, set and jointed in neat cement slurry and pointed in white or coloured cement over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and as directed.
12
-
-
Material and labour for glazed coloured ceramic tiles of grade B-III, 7mm thick of size 350x 250mm / 450x300mm matching to floor tile as approved, fixed on vertical surfaces such as in skirting/dados and risers to steps etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match floor tile over and including 10 mm thick backing coat in cement mortar 1:4 complete all as specified and as directed.
25
-
-
Material and labour for Machine cut polished kota stone slab 20-25mm thick laid and jointed with grey cement slurry and pointed with white cement mixed with pigment to match the shade of the slab including rubbing and machine cut polishing with mirror finish as in floors, over and including 15mm thick screed bed or bedding layer of mortar in cement mortar 1:6 complete all as specified and as directed.
2210
-
-
Material and labour for Machine cut polished kota stone slab 20-25mm thick laid and jointed with grey cement slurry mixed and pointed with white cement mixed with pigment to match the shade of the slab including rubbing and machine cut polishing with mirror finish as in skirting / dado, over and including a backing coat of 10mm thick in CM 1:4 complete all as specified and as directed.
60
-
-
Material and labour for PCC 1:2:4 type B1 (using 20mm graded aggregate) in copings, kerbs, channels, water through and the like including weathering, slightly rounded or chamfered angles and throating as directed chamfered necessary for work
72.75
-
-
Material and labour for Granite work (of any type) of thickness 22-25mm (of any size) machine cut, Jet Black granite slab, table rubbed and polished, laid over and including 15mm thick cement screed in cement mortar 1:4, bedded and jointed with grey cement slurry and pointed with white cement (1:2) using marble dust and admixture of pigments to match with shade of granite stone including cutting, polishing and rounding to edges of stone slabs etc.,complete all as specified and as directed.
57
-
-
Taking down chowkats or frames with shutters (without taking off shutters from frames) of size not exceeding 1.5 Sqms each complete all as specified and as directed
8
-
-
Taking down chowkats or frames with shutters (without taking off shutters from frames) of size exceeding 1.5 sqm and not exc 4.00 sqm each complete all as specified and as directed
252
-
-
Supply and fix Windows/ ventilators fabricated from roll formed sections made of galvanized steel colour coated/ powder coated (Base steel as per IS 513 “D” quality galvanized as per IS 277 with zinc of 120 gms/Sqr. Mtr.) with total coated thickness of 0.58mm.Sections for Frame should be of 72mm x 55mm, Section for Mullion should be of 72mm x 50mm, Section for Shutter Frame should be of 47mm x 20mm, Section for Fixed Glass Bead should be of 12mm x 12mm, and Section for Fly Mesh should be of 40mm x 20mm Section for Frame Glazed Shutters and Mesh Shutters should be cut to length and miter joined with Polypropylene Corner Brackets, Mullion Section should be joined with Frame/Mullion using Mullion Cap Ethyl Propylene Damien Monomer (EPDM) Gasket should be used all around glass in shutter and Fixed Glass. Spoon Section should be used around Fly mesh to fix Mesh in Mesh Shutter with Stainless Steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm of grade 304 including SS Pivot Hinges – 1 set, Handle & Stay and 4mm plain float glass and Stainless Steel 32 gauge Fly mesh of 25 holes per SqCM and powder coated Grill made of 10mm sq. MS Bars welded at 150mm c/c, 6mm x 12mm MS flat and fixed to window frame with screws complete all as directed Note: Measurement shall be the size of opening and the unit rate quoted shall be deemed to include the cost of Powder coated galvanised sheet sections for frames, shutters, powder coated MS grill, jonting cleats, Stainless stell wire mesh for fly proof, 5mm thick sheet glass, glazing clips, EPDM gaskets, builders hardware etc.
459
-
-
Supply and Fix Pressed steel frames of size 125mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc and providing one shop coat of primer and tarring back side of frame complete all as specified and as directed.
240
-
-
Material and labour for Providing Plain Cement Concrete, 1:2:4, type B0, using 12.5mm graded stone aggregate as in filling inside the pressed steel door frames or chowkats complete all as specified and as directed.
1.8
-
-
Cutting holes in brick wall built in cement mortor for inserting hold fast and making good the disturbed portion in cement mortor 1:3 depth of embeded portion exc half brick & N.exc one brick.
1104
-
-
S & F 35 mm thick factory made second class hardwood, Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS:1003 (Part I), kiln seasoned and chemically pressure treated. complete all as directed and specified.
105
-
-
Supply and Fix 2nd class hardwood factory made 35mm thick glazed and skeleton door shutters, open rebated and prepared to receive glass, gauge etc., without sash bars, edges of framing plain, chamfered, rounded fitted with cut and mitred beads for securing glass etc, size of members as specified in SSR Part 1 section 8 clause 8.24 (a) supplied and fitted to chowkats complete all as specified and as directed.
50
-
-
Material and labour for preparation of old painted steel surfaces of any description exceeding 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.
10
-
-
Supply and Fix 150 mm extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed by Engineer-in-Charge.
292
-
-
Supply and Fix 150mm aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed by Engineer-in-Charge.
292
-
-
Supply and Fix 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed
41
-
-
Material and labour for preparation of new wooden surface of any description exceeding 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer etc., complete all as specified and as directed.
379
-
-
Material and labour for preparing surfaces of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated with a coat creosote oil complete all as specified and as directed.
560
-
-
Material and Labour for powder coated (mininum 50 micron thickness of power coating of approved colour) aluminium frames for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed
520
-
-
Material and Labour for 12mm thick Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber or metal frame work
Note : Timber or metal frame work shall be measured and paid separately under relevant items in this schedule.
6
-
-
Supply and Fix 5.5 mm thick frosted glass quality and glazing clips in squares exceeding 0.5 Sqm in each pane, glazing with oil putty and glazing clips in metal frame/ second class hard wood beading in wooden frames including hacking out existing broken glass all as specified and directed.
41.8
-
-
Supply and Fix in repairs Mortice lock vertical type or cylindrical type size 100 mm brass body 4 lever all as specified and directed.
12
-
-
Supply and Fix in repairs door clooser aluminium body hydraulically regulated , designation No.3 , universal type , suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg all as specified and directed.
12
-
-
Material and Labour for rendering 25mm thick in two coats, dubbing out coat average thickness of 15mm thick in cement mortar (1:6) on irregular face of stone masonary walls and 10mm thick top coat in cement mortar 1:6, finished even and smooth without using extra cement complete all as specified and as directed
760
-
-
Supply and Fix factory made solid PVC door frame of size 50mm x 47mm made out of 5mm thick plain colour PVC sheet, reinforced with 19mm MS square tube of 19 gauge mitred out at two corners and joined by inserting two Nos of 150mm long brackets of 15mm x 15mm MS square tube inside the drilling 100mm long MS screws using PVC fastener as per manufacturer's instructions complete all as specified and as directed.
10
-
-
Supply and Fix factory made Factory PVC door shutter made solid panel of plain colour, 30mm thick (style) consisting of frame made out M.S tube for top & bottom rails. M.S Frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail : Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/scaled the stiles & rails with suitalble PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specifications & drawing given in Section 8 of MES Schedule Part-II 2020 as applicable complete all as specified and as directed.
Note: Butt hinges, Barrer tower bolts, handles and sliding door bolts shall be measured and paid separately.
3
-
-
Supply and Fix stainless steel butt hinges of 100mm size, medium weight with stainless steel hinge pin complete all as specified and as directed
6
-
-
Dismantling / Demolition and breaking of old PVC water tank of capacity exc. 250 and n. exc 500 litres with ball valve laid on RCC roof slab carefully without disturbing to existing roof/wall etc., complete all as specified and as directed.
Note : If any damage occurred to existing roof / wall during demolition shall be made good by the contractor at his own and without any cost to department.Dismantling water tanks and removing to store
2
-
-
Supply and Fix, 500 litres capacity Rotational Moulded Polyethylene (HDPE) Water StorageTank (Cylindrical vertical with closed top), made of FDA grade materials, double layered, screwed lid type, ISI Marked, conforming to IS 12701-1996 with manhole lid and suitable locking arrangement including making holes for inlet, outlet, washout and over flow pipes, hoisted and fixed in position as specified in SSR Part -I (2009) etc., complete all as specified and as directed.
2
-
-
Taking up or down steel tubing 15mm bore and connections and cleaning for refixing / taken on credit complete all as specified and as directed.
10
-
-
Supply and fix Galvanised steel water tubing medium grade 15mm bore conforming to IS specifications and ISI marked with all fittings such as bends, tees, unions, elbows, connecting pieces, plugs, sockets etc fixed on walls/ceiling or laid in floors etc., complete all as specified and as directed.
Note: (i) Earthwork excavation, returning filling in and removal of surplus soil if required shall be measured and paid separately.
(ii) GI fittings such as bends, elbows, Clamps for fixing on wall, etc are included in the unit rate.
8
-
-
Refixing old Galvanised steel water tubing medium grade 15mm bore and connections in new or old position (Walls, ceiling, floors, etc) after thoroughly cleaning the old pipe, including providing new fittings such as bends, tees, unions, elbows, connecting pieces, plugs, sockets etc., fixed on walls/ceiling or laid in floors etc., complete all as specified and as directed.
Note: (i) Earthwork excavation, returning filling in and removal of surplus soil if required shall be measured and paid separately.
(ii) GI fittings such as bends, elbows, Clamps for fixing on wall, etc are included in the unit rate.
2
-
-
Taking up or down steel tubing 20mm bore and connections and cleaning for refixing / removing to store/ taken on credit complete all as specified and as directed.
366
-
-
Supply and fix Galvanised steel water tubing medium grade 20mm bore conforming to IS specifications and ISI marked with all fittings such as bends, tees, unions, elbows, connecting pieces, plugs, sockets etc fixed on walls/ceiling or laid in floors etc., complete all as specified and as directed.
Note: (i) Earthwork excavation, returning filling in and removal of surplus soil if required shall be measured and paid separately.
(ii) GI fittings such as bends, elbows, Clamps for fixing on wall, etc are included in the unit rate.
4
-
-
Refixing old Galvanised steel water tubing medium grade 20mm bore and connections in new or old position (Walls, ceiling, floors, etc) after thoroughly cleaning the old pipe, including providing new fittings such as bends, tees, unions, elbows, connecting pieces, plugs, sockets etc., fixed on walls/ceiling or laid in floors etc., complete all as specified and as directed.
Note: (i) Earthwork excavation, returning filling in and removal of surplus soil if required shall be measured and paid separately.
(ii) GI fittings such as bends, elbows, Clamps for fixing on wall, etc are included in the unit rate.
2
-
-
Supply and fix in repairs Ball valve PTMT with epoxy coated aluminimum rod for 20mm bore pipe, weight not less than 210gms, high pressure with polyethylene high density float and complete screwed for iron pipe all as specified and directed.
2
-
-
Supply and Fix in repairs Gun metal globe or gate valve of size 20mm bore confirming to IS 778-1984 with iron wheel head, screwed both ends for GI pipe including all fittings / fixtures like nipple, union etc., complete all as specified and as directed.
14
-
-
Supply and fix in repairs Bib taps 15 mm bore, cast copper alloy, chromium plated, fancy type, with crutch or butterfly handle confirming to IS screwed down, screwed for iron pipes or for brass ferrule, complete all as specified and as directed.
2
-
-
Supply and fix in repairs in repairs vitreous china wash basin, white, flat back, size 580mm X 450mm including CI brackets, 32mm dia brass chromium plated waste fittings with long screwed shanks and fly nuts flanged end bedded in red lead cement and other end fixed, 15mm bore pillar tap, cast copper alloy fancy type chromium plated, screwed down high pressure, 32mm Dia Low density polyethylene pipe (LDPE) of pressure rating 6 Kgf/cm2, cutting for & pinning in end of brackets, complete all as specified and as directed.
1
-
-
Supply and fix in repairs Pillar Tap 15mm bore, cast copper alloy, fancy type, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed.
1
-
-
Supply and fix in repairs Stop valve / angle cock 15mm bore, cast copper alloy, fancy type, chromium plated conforming to IS with screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union, complete all as specified and as directed.
2
-
-
Supply and fix in repairs Brass chromium plated shower rose of size 125mm with swivel joints compete all as specified and directed.
1
-
-
Supply and fix in repairs PVC connection 15mm bore, length 450mm with brass nuts of superior quality complete all as specified and as directed
2
-
-
Supply and fix in repairs vitreous china wash down water closet squatting pan, Orissa pattern of size 580x440mm with integral foot rest ,colour white with and including P or S trap (excluding flushing cistern & flush pipe), providing lean concrete bedding and making necessary connection to soil pipes and flushing cistern etc.,complete all as specified and as directed.
1
-
-
Supply and fix in repairs PVC valve less, syphonic action type, low level flushing cistern, 10 litre capacity, white, with accessories like inlet, ball valve, float, handle, brackets, PVC flush pipe, over flow pipe etc. complete all as specified and as directed.
1
-
-
Supply and fix in repairs bevelled edge looking mirror of size 600mm x 450mm, 6mm thick selected quality glass, mounted on 6mm thick commercial ply wood backing covered with aluminium frame and fixed in wall with wooden plug with chromium plated brass screws and cup washers etc., complete all as specified and as directed.
1
-
-
Supply and fix in repairs Stainless Steel tubular towel rail, 20mm dia, D type, 600mm long, Chromium plated with flanges fixed on wall with rawl plug and chromium plated brass screws and wooden/plastic cleats, fixed complete all as specified and as directed .
1
-
-
Supply and Fix UPVC (SWR) pipes 110mm bore, single socketed in any length with rubber ring joints fixed to walls/ laid in trenches or under floors etc., including demolition and breaking up existing drain pipes and taking out out with fittings etc., complete all as specified and as directed Note: (i) Earthwork excavation, returning filling in and removal of surplus soil if required shall be measured and paid separately.
(ii) Clamps for fixing on wall, etc are included in the unit rate.
5
-
-
Supply & fixing UPVC (SWR) junction single (single T) equal or unequal 110mm dia with access doors complete
2
-
-
Supply and Fix 110mm dia vent cowl UPVC (SWR)
1
-
-
Supply and fix 110mm bore UPVC (SWR) bend, any radius complete all as specified and as directed.
2
-
-
Supply and Fix UPVC (SWR) Nahani /Floor trap, 75 mm dia of out let, plain with grating including jointing to waste pipe with solvent and cement concrete type B1 (1:2:4) & including removing old trap and fixing of stainless steel grating in rround shape etc complete all as specified and as directed.
2
-
-
Material and labour for coloured Non Skid ceramic tiles of grade B-II(a), (square/ rectangular), light coloured group, area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm of 7 to 8 mm thick, laid in floors of pattern as approved, set and jointed in neat cement slurry and pointed in white or coloured cement over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and as directed.
28
-
-
Material and labour for coloured Non Skid ceramic tiles of grade B-II(a), (square/ rectangular), light coloured group, area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm of 7 to 8 mm thick, as in skirting/dado of pattern as approved, set and jointed in neat cement slurry and pointed in white or coloured cement over and including 10 mm thick backing coat in cement mortar 1:4 complete all as specified and as directed.
5
-
-
Excavating in post holes soft/loose soil (or similr holes) not exc 0.5 Cum getting out and removing excavated soil to a distance not exc 50m and making good surfaces
120
-
-
Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtr depth for laying of cables, pipes, laying of poles in trenches and getting out in soft/loose soil complete all as directed and specified.
135
-
-
Returning, filling including spreading, levelling, watering and well ramming in layers not exceeding 25 cms thick complete all as all as specified and directed.
98
-
-
Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and as directed.
1930
-
-
Removal of surplus soil to a distance not exceeding 50 mtrs and depositing where directed at a level not exceeding 1.5 mtrs above from the starting point, spread, levelled uniformly in layers not exceeing 25cm each complete all as all as specified and directed.
326
-
-
Material and Labour for hard core of broken stone or boulders of gauge not exceeding 63mm deposited, spread and levelled in layers not exceeding 15cm thick, watered and rolling with power roller exc. 8 tonne & n.exc. 12 tonne to a true surface complete all as specified and directed.
193
-
-
Material and Labour for 75 mm thick plain cement concrete 1:4:8 mix,type D2 (using 40 mm graded stone aggregates) as in subbase to floor complete all as specified and as directed.
1880
-
-
Material and labour for 25mm thick designer rubber moulded chequered cement concrete tiles with mixture of grey and white cement in equal proportions with pigments of size 200x 200mm (or) 300 x 300mm (or) 250 x 250mm, set, jointed and pointed in neat cement slurry, as in floors, over and including screed bed or bedding layier in CM 1:6, 15mm thick etc. complete all as specified and as directed.
820
-
-
Material and labour for laying of machine pressed precast concrete interlocking paver block, 60 mm thickness, M-35 grade with grey cement and pigments of any shape and size confirming to IS 15658-2006 over 50mm thick compacted sand cushioning complete all as specified and as directed.
1110
-
-
Material and labour for plain cement concrete type C2,1:3:6 using 40mm graded stone aggregate as in embedding of post etc, complete all as all as specified and directed.
14.58
-
-
Material and Labour for preparation of new surfaces of steel, of any description, not otherwise described, over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.
2766
-
-
Material and labour for one coat of synthetic enamel paint on old painted wooden surfaces of any description exceeding 10cm width or girth including necessary preparation of existing surfaces complete all as specified and as directed.
10
-
-
Taking down carefully existing Unserviceable point wiring of any description / type / size of (light/fan/socket/call bell/two way/Power point) on TW batten/conduit complete including fittings and fixtures such as switches, ceiling roses, shades, brackets, sockets, holders, light fittings, call bells and removing the materials to store for keeping in safe custody for reuse at site or for taking credit including making good the disturbed surfaces of walls/floors/ceilings etc. complete all as specified and as directed.
582
-
-
Material and Labour for providing point wiring with 1.5 sq. mm (nominal area) single core PVC insulated FRLS unsheathed multi-stranded copper conductor cable (maintaining colour code), 1100 volts grade in and including non metalic rigid PVC conduit medium grade with appropriate size with all fittings (ISI Marked) suitable for concealed wiring on brick, masonary walls etc including modular metal flush sunken box of adequate size with suitable modular cover plate with frame for mounting modular switches, sockets, regulators etc. complete with all fittings and accessories fixed to wall/ ceiling for one light/ bell point controlled by one one way modular switches including one run 1.5 sqmm (nominal area) PVC insulated FRLS unsheathed multi-stranded copper conductor cable green in colour for earth continuity conductor connected to common earth dolly including making good the disturbed surfaces to match with the existing specification, complete all as specified & directed at site. Notes; (i) Cutting chases in brick masonry walls/concrete surfaces for concealed conduit wiring and making good the disturbed surfaces shall be measured and paid separately.
(ii) Rate of Modular flush box and cover plate with frame are inclusive of the rate quoted
(iii) Location of light points, 6 Amp socket points and light fittings may be decided by Engr-in-charge as per site/user requirment
280
-
-
All as per ser item No. 127 here in before but for one Ceiling Fan / exhaust fan point controlled by one, one way switch and regulator
87
-
-
All as per ser item No. 127 here in before but for one 3 pin 6 Amps socket outlet point controlled by one switch on independent board .
150
-
-
All as per ser item No. 127 here in before but for one 3 pin 6 Amps socket outlet point controlled by one switch on the same board.
52
-
-
All as per ser item No. 127 here in before but using 4 Sqmm single core copper conductor cable of multistranded FRLS PVC insulated unsheathed 1100 Volts grade for 3 Pin 16 Amps switch socket combination point on independent board including running of 4 Sq mm copper conductor FRLS PVC insulated cable as earth continuity conductor.
42
-
-
Material and Labour for providing point wiring with 1.5 sq. mm (nominal area) single core PVC insulated FRLS unsheathed multi-stranded copper conductor cable (maintaining colour code), 1100 volts grade in and including non metalic rigid PVC conduit medium grade with appropriate size with all fittings (ISI Marked) suitable for surface wiring on brick, masonary walls/ wooden/ steel members, etc including modular metal flush sunken box of adequate size with suitable modular cover plate with frame for mounting modular switches, sockets, regulators etc. complete with all fittings and accessories fixed to wall/ ceiling for one light / bell point controlled by one oneway modular switches including one run 1.5 sqmm (nominal area) PVC insulated FRLS unsheathed multi-stranded copper conductor cable green in colour for earth continuity conductor connected to common earth dolly including making good the disturbed surfaces to match with the existing specification, complete all as specified & directed at site. Notes; (i) Rate of Modular flush box and cover plate with frame are inclusive of the rate quoted
(iii) Location of light points, 6 Amp socket points and light fittings may be decided by Engr-in-charge as per site/user requirment
125
-
-
All as per ser item No. 132 here in before but for one Ceiling Fan / exhaust fan point controlled by one, one way switch and regulator
72
-
-
All as per ser item No. 132 here in before but for one 3 pin 6 Amps socket outlet point controlled by one switch on independent board .
36
-
-
All as per ser item No. 132 here in before but for one 3 pin 6 Amps socket outlet point controlled by one switch on the same board.
25
-
-
All as per ser item No. 132 here in before but using 4 Sqmm single core copper conductor cable of multistranded FRLS PVC insulated unsheathed 1100 Volts grade for 3 Pin 16 Amps switch socket combination point on independent board including running of 4 Sq mm copper conductor FRLS PVC insulated cable as earth continuity conductor.
14
-
-
Supply and Fix modular switch 1 way 6 A, 1 Module capacity 230 volts complete all as specified and as directed.
827
-
-
Supply and Fix modular Type shuttered Socket outlet, 3 pin 6 Amps,230 volts two modules with ISI mark complete all as specified and directed.
263
-
-
Supply and Fix modular Type shuttered Socket outlet,3 pin 6/16 Amps, 230 volts Two modules with ISI mark complete all as specified and directed.
56
-
-
Supply and Fix modular switch 1 way, 16 Amps, 2 module capacity 230 volts complete all as specified and as directed.
56
-
-
Supply and fix electronic ceiling fan regulator modular stepped type 120W 2 module heavy duty suitable to work on 230 volts complete all as specified and as directed.
155
-
-
Supply and fix ceiling rose, surface mount type, PVC/ Polycarbonate, isolated body, 3 terminals complete all as specified and as directed.
424
-
-
Supply and Fix lamp holder, PVC/ Polycabonate type, insulated body with back plate complete all as specified and directed.
140
-
-
Supplying and fixing LED Tube lights fitting 1x 20W, 220V, AC, decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.
75
-
-
Supplying and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V, AC, recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cables of suitable size complete all as specified and as directed.
190
-
-
Supplying and fixing LED building security street light fitting, 35 Watt ,230 V, AC, outdoor type with high pressure die cast aluminum hosing and heat resistant with impact resistance of IK07 and corrosion resistant including thermal management in multiple optics, with IP 65/66 protection complete with driver, lamp and GI pipe bracket made out of light grade GI tubing of suitable bore, 1.50 metre length bent to shape by hot forgoing after filling of sand and fixed on pole (or) wall with 2 Pairs of MS clamps made out 50 x 6mm Flat Iron of required shape including bolts, nuts and washers suitable for wall mounting and painting of mild steel flat iron surface with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
45
-
-
Supply and fixing and testing factory made, sheet metal enclsosure MCB DB SPN 12 way with suitable rated bus bar 240 volts double door with magnetic locking system with common neutral link earth bar, din bar for mounting MCBs, terminal connectors for all incoming and outgoing circuits,complete all as specified and as directed
23
-
-
Supply, fix, connecting and testing RCBO Double Pole 30mA, of capacity 40 Amps, breaking capacity 10kA, 240/415Volts complete all as specified and as directed.
23
-
-
Supply, fix, connecting and testing MCB, Single Pole (SP), 6-32 Amps, 240 volts of rupturing capacity 10kA, 'C' series complete all as specified and as directed.
150
-
-
Taking down and removing the existing unserviceable sub main wiring of any description and with any size of cables, conduits, etc. alongwith conduit accessories and making good the disturbed surface to match with the existing surface etc., complete all as specified and as directed.
1005
-
-
Material and labour for sub main wiring complete with two runs of 2.50 Sqmm single core, multistranded, FRLS PVC insulated unsheathed cable 1100 volts grade with copper conductor, drawn through and including new non metallic rigid PVC conduit of 20mm dia medium grade, ISI marked with conduit fittings and accessories, on open surface on wall/ceiling along with one run of 2.50 Sqmm PVC insulated unsheathed copper conductor cable as earth continuity conductor and connecting to common earth dolly etc., complete all as specified and as directed. Notes: (a) Two runs of 2.50 sqmm multistranded cable and one run of 2.50 sqmm cable as earth continuity conductor along with one run of non metallic rigid PVC conduit of 20mm dia medium grade shall be considered as one unit length.
(b) The wiring shall be done in proper colour coding using Red, Yellow, blue for phases, black for neutral and green for earth.
275
-
-
Material and labour for sub main wiring complete with two runs of 4 Sqmm single core, multistranded, FRLS PVC insulated unsheathed cable 1100 volts grade with copper conductor, drawn through and including new non metallic rigid PVC conduit of 20mm dia medium grade, ISI marked with conduit fittings and accessories, on open surface on wall/ceiling along with one run of 4 Sqmm PVC insulated unsheathed copper conductor cable as earth continuity conductor and connecting to common earth dolly etc., complete all as specified and as directed. Notes: (a) Two runs of 4 sqmm multistranded cable and one run of 4 sqmm cable as earth continuity conductor along with one run of non metallic rigid PVC conduit of 20mm dia medium grade shall be considered as one unit length.
(b) The wiring shall be done in proper colour coding using Red, Yellow, blue for phases, black for neutral and green for earth.
205
-
-
Material and labour for sub main wiring complete with two runs of 6 Sqmm single core, multistranded, FRLS PVC insulated unsheathed cable 1100 volts grade with copper conductor, drawn through and including new non metallic rigid PVC conduit of 25mm dia medium grade, ISI marked with conduit fittings and accessories, on open surface on wall/ceiling along with one run of 6 Sqmm PVC insulated unsheathed copper conductor cable as earth continuity conductor and connecting to common earth dolly etc., complete all as specified and as directed. Notes: (a) Two runs of 6 sqmm multistranded cable and one run of 6 sqmm cable as earth continuity conductor along with one run of non metallic rigid PVC conduit of 25mm dia medium grade shall be considered as one unit length.
(b) The wiring shall be done in proper colour coding using Red, Yellow, blue for phases, black for neutral and green for earth.
60
-
-
Material and labour for concealed sub main wiring complete with two runs of 2.50 sqmm single core, multistranded, FRLS PVC insulated unsheathed cable 1100 volts grade with copper conductor, drawn through and including new non metallic rigid PVC conduit of suitable dia medium grade, ISI marked with conduit fittings and accessories concealed in wall/floor/roof along with one run of 2.50 Sqmm PVC insulated unsheathed copper conductor cable as earth continuity conductor and connecting to common earth dolly etc., complete all as specified and as directed. Notes: (a) Two runs of 2.50sqmm multistranded cable and one run of 2.50sqmm cable as earth continuity conductor along with one run of non metallic rigid PVC conduit of suitable dia medium grade shall be considered as one unit length.
(b) Cutting chases in brick masonry walls/concrete surfaces for concealed conduit wiring and making good the disturbed surfaces shall be measured and paid separately.
(c) The wiring shall be done in proper colour coding using Red, Yellow, blue for phases, black for neutral and green for earth.
235
-
-
Material and labour for concealed sub main wiring complete with two runs of 4 sqmm single core, multistranded, FRLS PVC insulated unsheathed cable 1100 volts grade with copper conductor, drawn through and including new non metallic rigid PVC conduit of suitable dia medium grade, ISI marked with conduit fittings and accessories concealed in wall/floor/roof along with one run of 4 Sqmm PVC insulated unsheathed copper conductor cable as earth continuity conductor and connecting to common earth dolly etc., complete all as specified and as directed. Notes: (a) Two runs of 4 sqmm multistranded cable and one run of 4 sqmm cable as earth continuity conductor along with one run of non metallic rigid PVC conduit of suitable dia medium grade shall be considered as one unit length.
(b) Cutting chases in brick masonry walls/concrete surfaces for concealed conduit wiring and making good the disturbed surfaces shall be measured and paid separately.
(c) The wiring shall be done in proper colour coding using Red, Yellow, blue for phases, black for neutral and green for earth.
550
-
-
Material and labour for concealed sub main wiring complete with two runs of 6 sqmm single core, multistranded, FRLS PVC insulated unsheathed cable 1100 volts grade with copper conductor, drawn through and including new non metallic rigid PVC conduit of suitable dia medium grade, ISI marked with conduit fittings and accessories concealed in wall/floor/roof along with one run of 6 Sqmm PVC insulated unsheathed copper conductor cable as earth continuity conductor and connecting to common earth dolly etc., complete all as specified and as directed. Notes: (a) Two runs of 6 sqmm multistranded cable and one run of 6 sqmm cable as earth continuity conductor along with one run of non metallic rigid PVC conduit of suitable dia medium grade shall be considered as one unit length.
(b) Cutting chases in brick masonry walls/concrete surfaces for concealed conduit wiring and making good the disturbed surfaces shall be measured and paid separately.
(c) The wiring shall be done in proper colour coding using Red, Yellow, blue for phases, black for neutral and green for earth.
70
-
-
Material and labour earthing complete with galvanized steel earth plate electrode of size 600 x 600 x 6mm thick buried directly in ground (earth pit not less than 2.25m deep below the normal ground level) with top edge of plate not less than 1.5m below normal ground level connected to GI wire 4mm dia as earth lead by means of bolts, nuts, washers and check nuts made out of galvanized iron or steel all as shown on electrical plate No.3 of SSR Part-I including testing on completion complete all as specifed and directed by Engr-in-Charge. Note 1: The unit rate shall also include for earth work in any type soil, PCC 1:3:6 type C1 chamber, 50mm thick RCC 1:2:4 type B-1 using 20mm graded stone aggregate cover slab reinforced with 6 NOs of 8mm dia TMT bars both ways, funnel with watering pipe 20 mm dia medium grade, GI protection pipe medium grade 20 mm dia and wire mesh complete in addition to item No.1(a) to (e) of preamle (Notes) under sub-heading earthing, specified on Sl Page No.422 of SSR Part-II.
14
-
-
Supplying and fixing ceiling fans, five star rated with Brushless Direct Current (BLDC) motor complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep with minimum air delivery 210 CFM, service value 6.00 BEE including provision of flexible copper cord of size 23/0.0076 of required length from ceiling rose or connector to ceiling fan, connected up and testing complete all as specified and as directed .
60
-
-
Supply, install, testing & commissioning of heavy duty Exhaust fan, metal body with automatic back shutter louvers 300 mm sweep, 1400 RPM or more, Air Delivery not less than 1710 Cum/Hour, single phase, 240 Volts, AC, 50 Hz including cutting hole into the wall / existing window / ventilator etc., including taking down existing unserviceable exhaust fan of any description and removing to store and making good the disturbed surfaces and connecting up complete including provision of cable 3/2 core of suitable size from ceiling rose to fan in flexible hose complete all as specified and as directed. Note :- (i) The unit rate quoted shall be deemed to include the cost of any framework/ cement work/ wood work/ welding work etc. required for proper fixing of the exhaust fan and matching to the existing surface.
4
-
-
Supply and laying GI Tubes of size 40mm bore, 'Medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.
60
-
-
Supply and Fix factory made, MCCB DB, IP 43, VTPN, 4 way, 415 Volts, double door, semi flush type made out of 1.2mm thick CRCA sheet metal, duly powder coated and conforming to IS 8623 fitted with suitable copper bus bar, neutral links, blanking plate etc., fixed into wall including connecting, testing etc., complete all as specified and as directed. Notes:- (a) The unit rate quoted shall be deemed to include the cost of making hole/cavity in walls/other surfaces, making good the disturbed surfaces including any framework/cement work/wood work/welding work etc. required for proper fixing of DB and matching to the existing surface.
(b) MCCBs/ MCBs shall be measured and paid separately under relevant items of this BoQ
3
-
-
Supplying, fixing, connecting and testing MCCB, Three Pole, 200 Amps, breaking capacity 36kA, 415Volts with Adjustable Thermal & Fixed Magnetic setting conforming to IS: 13947-2 along with sheet steel enclosure of suitable size with bus bar panel complete all as specified and as directed.
3
-
-
Disconnecting the electric supply and taking down ceiling fan of 1200/1400mm sweep from any height, sealing cable end, including re-hanging/Fixing of ceiling fan and connecting up including provision of new MS fan hook and PVC insulated multistranded copper conductor cable of suitable size from ceiling rose or connector to fan complete all as specified and directed
95
-
-
Cutting chases, pinning in making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings steps, cills, sunshades,shelves, lintels,etc, and cutting chases for concealed water tubing or concealed conduit wiring etc and making good cutting not exc 10 cm grith complete all as specified and directed.
1500
-
-
Material and labour for Rigid non-metallic PVC Conduit of size 20 mm dia exclusive of boxes (Junction/terminal) but inclusive of all tees, bends elbows,reducers, bell mouth tube ends and fixing eccessoried such as couplers, lcok nuts, saddles, pipe hooks etc (For carrying Telephone wire/Data cable) all as specified and as directed
205
-
-
Supply and lay in trenches / drawn through pipes or in road crossings / paths / drains / ducts / floors / along poles / equipments etc., of LT cable XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, heavy duty electric power cable with stranded aluminium conductor, 1100 volts grade confirming to IS-7098 (Part-I) 1988 of size 50 Sqmm x 3.5 Core including connecting up using suitable size aluminium lugs testing and commissioningand taking out the unserviceable LT UG cables etc., complete all as specified and as directed.
Note : Excavation earth work, sand cushioning and brick / PCC cover cable protection shall be measured and paid separately.
120
-
-
Supply and lay in trenches / drawn through pipes or in road crossings / paths / drains / ducts / floors / along poles / equipments etc., of LT cable XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, heavy duty electric power cable with stranded aluminium conductor, 1100 volts grade confirming to IS-7098 (Part-I) 1988 of size 35 Sqmm x 3.5 Core including connecting up using suitable size aluminium lugs testing and commissioningand taking out the unserviceable LT UG cables etc., complete all as specified and as directed.
Note : Excavation earth work, sand cushioning and brick / PCC cover cable protection shall be measured and paid separately.
178
-
-
Supply and lay in trenches / drawn through pipes or in road crossings / paths / drains / ducts / floors / along poles / equipments etc., of LT cable XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, heavy duty electric power cable with stranded aluminium conductor, 1100 volts grade confirming to IS-7098 (Part-I) 1988 of size 16 Sqmm x 4 Core including connecting up using suitable size aluminium lugs testing and commissioning and taking out the unserviceable LT UG cables etc., complete all as specified and as directed.
Note : Excavation earth work, sand cushioning and brick / PCC cover cable protection shall be measured and paid separately.
190
-
-
Supply and lay GI tube light grade, 40mm bore, ISI marked with all fittings, complete, fixed to walls, pole ceiling or laid in trenches under road crossing/floor for cable protection at road crossing / on poles etc., complete all as specified and as directed. Note:- Excavation and earth work where required shall be measured separately.
21
-
-
Supply, lay / spread in trenches clean dry sand for cushioning of cable to the full width of excavated trench, 8cm thick before laying cable and 15cm thick above the cable, gently punned down, stretching and testing of cable on transformer yard etc., complete all as specified and as directed.
Note : Punned thickness only will be considered or payment.
32
-
-
Material and labour brick protection with common burnt bricks sub class ‘B’ of size 230 x 115 x 75mm for cable protection complete all as specified and directed.
2
-
-
Material and labour for cutting of existing bituminous / PCC road of flooring / plinth protection laying of GI pipe in intersection for passing of LT XLPE cable including excavation in any type of soil returning filling in and making good top 30 cm of the trench by providing PCC 1:2:4 type B-1 using 20mm graded stone aggregate to flush with existing road surface complete all as specified.
21
-
-
Material and labour earthing complete with galvanized steel earth plate electrode of size 600 x 600 x 6mm thick buried directly in ground (earth pit not less than 2.25m deep below the normal ground level) with top edge of plate not less than 1.5m below normal ground level connected to GI strip 25x4mm as earth lead by means of bolts, nuts, washers and check nuts made out of galvanized iron or steel all as shown on electrical plate No.3 of SSR Part-I including testing on completion complete all as specifed and directed by Engr-in-Charge. Note 1: The unit rate shall also include for earth work in any type soil, PCC 1:3:6 type C1 chamber, 50mm thick RCC 1:2:4 type B-1 using 20mm graded stone aggregate cover slab reinforced with 6 NOs of 8mm dia TMT bars both ways, funnel with watering pipe 20 mm dia medium grade, GI protection pipe medium grade 40 mm dia and wire mesh complete in addition to item No.1(a) to (e) of preamle (Notes) under sub-heading earthing, specified on Sl Page No.422 of SSR Part-II.
2
-
-
Supplying, fixing, connecting and testing MCCB, Four Pole, 200 Amps, breaking capacity 36kA, 415Volts withAdjustable Thermal & Fixed Magnetic setting conforming to IS: 13947-2 along with sheet steel enclosure of suitable size with bus bar panel complete all as specified and as directed.
1
-
-
Supply and fix Galvanised steel water tubing medium grade 20mm bore conforming to IS specifications and ISI marked with all fittings such as bends, tees, unions, elbows, connecting pieces, plugs, sockets etc fixed on walls/ceiling or laid in floors etc., complete all as specified and as directed.
Note: (i) Earthwork excavation, returning filling in and removal of surplus soil if required shall be measured and paid separately.
(ii) GI fittings such as bends, elbows, Clamps for fixing on wall, etc are included in the unit rate.
360
-
-
Supplying and fixing in repairs Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps , 240 Volts etc. complete all as specified and as directed.
28
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements