Military Engineer Services Tender

Note:- 1. Contractor need to purchase minimum 50% of all items mentioned in this CA within 20 days of getting sample approval and kept in custody so that no delay in work due to non-availability of materials will be faced. Contractor should ensure during the cause of work that he has minimum 25% of materials with him till the completion of item/date. 2. Contractor should buy the exact items which are given with catalogue reference. Other makes will be approved only by submitting non availability Certificate Company. Contractor need to remove all the dismantled items without delay. 3. Rate quoted for demolition/dismantling /taking down is inclusive of removing the same from site and dumping at given locations anywhere inside station. 4. List of complaints will be given to contractor on the first week of every month. Contractor should ensure all the works will be completed within that month itself. 7. Contractor should ensure that plumbing complaints resulting in wastage of water should be attended and rectified within 24 hours. Otherwise, a recovery of 25% of corresponding item will be made from contractor. 8. Contractor will make his own arrangement to store his items. 9. Some places in this contract where the vehicle will not reach the spot directly, the material will be moved manually in these places. The rate quoted will be considered all inclusive on this account. 5. All trade skilled labour required in this contract shall be present daily in working hours, irrespective of complaints received. 6. Complaint for a similar items may be in scattered / different area, quoted rate will be considered all inclusive on this account.

Complete removal of existing treatment on brick/stone walls / roof projections incl facia, cornices etc by scrapping with mechanical sander (having mechanical vaccum mechanism) having RPM not less than 1500, sanding pad of 80 grit havig dia of 7" / 9" to make free from dust, loose paint etc by skilled labour complete all as specified and directed.

M & L for waterproof cement based putty of average thickness 1mm over the plastered / old prepared painted surface of brick/ stone wall and sanding of the putty surface with mechanical wall sander (having mechnical vaccum mechanism) having RPM not less than 1500, sanding pad of 240 grit or above to make the surface free from dust etc by skilled labour as per the following steps :- Step 1 :- Mix the putty powder by adding water as per manufacture's instr and mix it with putty mixer with the mixing capacity of min 2.5kg putty per minute. Step 2 :- Apply the first coat of the prepared mixer with the help of fully automatic airless spray machine of putty application finishing the surface even and smooth in level without any undulations. Step 3 :- Allow 6-8 hrs time to dry the putty surface.