Military Engineer Services Tender
For getting the details of etenders, if you are looking for information about them from the cumbersome government websites but are tired of doing so, Bidassist comes up with a one stop solution. It collates every Eproc telangana tender on Bidassist. One can approach it for the bidding process, registration process, etc., are explained below.
Military Engineer Services - MES Tender
Civil And Construction
Civil Works Others
Building Construction
Eprocure
Opening Date23 Dec 2024
Closing Date25 Jan 2025
Tender Amount₹ 42,48,000
Costs
EMD
₹ 84,960Document Cost
₹ 500Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_MES_689990_1Bid Award Id
ViewTender No
8229Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://MilitaryEngineerServices
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Providing and laying cement concrete 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) in foundations excluding the cost of centering, shuttering and finishing complete all as specified and directed.
7.7
-
-
... More
Providing and laying cement concrete 1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) in foundations and up to plinth level excluding the cost of centering, shuttering and finishing complete all as specified and directed.
2
-
-
... More
Centering and shuttering including strutting, propping etc. and removal of form for foundations, footings, bases of columns, etc., for mass concrete complete all as specified and directed.
4
-
-
... More
Centering and shuttering including strutting, propping etc., and removal of form for lintels, beams, plinth beams, girders, bressumers and cantilevers complete all as specified and directed.
16
-
-
... More
Centering and shuttering including strutting, propping etc., and removal of form for suspended floors, roofs, landings, balconies and access platform complete all as specified and directed.
28
-
-
... More
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) complete all as specified and directed.
5
-
-
... More
Providing and laying up to floor five level reinforced cement concrete in kerbs, steps and the like excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20mm nominal size derived from natural sources) complete all as specified and directed.
1.9
-
-
... More
Rectangular shape 900x450 mm precast R.C.C. manhole cover with frame - L.D - 2.5 complete all as specified and directed.
8
-
-
... More
Steel reinforcement Thermo-Mechanically Treated bars of grade Fe-500D or more for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level (foundation footings, plinth beams) complete all as specified and directed.
65
-
-
... More
Steel reinforcement Thermo-Mechanically Treated bars of grade Fe-500D or more for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level (lintel beam, roof beam and roof slab) complete all as specified and directed.
840
-
-
... More
M&L for brickwork with sub class ‘B’ bricks, straight or curved on plan exceeding 6m mean radius built in CM(1:6) complete all as specified and as directed.
29
-
-
... More
M&L brick work with sub class 'B' bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar (1:3) complete all as specified and directed.
2
-
-
... More
M&L brick work with sub class 'B' bricks in one brick thick honey comb walling, built in cement mortar (1:6) complete all as specified and directed.
5
-
-
... More
M&L for brick bat filling in Soak well complete all as specified and directed.
2.1
-
-
... More
Brick work with non modular fly ash bricks conforming to IS:12894, class designation 10 average compressive strength in super structure above plinth level up to floor V level in Cement mortar 1:4 (1 cement : 4 coarse sand) complete all as specified and directed.
16
-
-
... More
12mm thick rendering in cement mortar (1:6) on fair faces of brick or concrete surfaces, finished fair and even without using extra cement complete all as specified and directed.
110
-
-
... More
15mm thick rendering in cement mortar (1:4) on fair faces of brick or concrete surfaces, finished fair and even without using extra cement using with water proofing compound @ 3% by weight of cement or as per manufacturer's instructions complete all as specified and directed.
NOTE: Water proofing compound will be measured and paid separately under relevant items.
26
-
-
... More
6 mm cement plaster 1:3 (1 cement : 3 fine sand) finished with a floating coat of neat cement and thick coat of Lime wash on top of walls when dry for bearing of R.C.C. slabs and beams.complete all as specified and directed.
20
-
-
... More
Supply only integral water proofing compound ISI marked complete all as specified.
13
-
-
... More
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :
New work (two or more coats) over and including water
thinnable priming coat with cement primer complete all as specified and directed.
120
-
-
... More
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :
New work (ONE coat) over old plastered surfaces of walls/ceilings complete all as specified and directed.
20
-
-
... More
Steel work welded in built up sections/ framed work, including cutting,hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required complete all as specified and directed.
2050
-
-
... More
Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture complete all as specified and directed.
50
-
-
... More
Preparation of newly plastered surfaces of walls and applying two coats of weather proof antifungal exterior acrylic emulsion paint (100% acrylic) premium quality over a coat of alkali resistant primer as per manufacturers instructions complete all as specified and as directed.
38
-
-
... More
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with ISI marked white solid plastic seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required complete all as specified and directed.
2
-
-
... More
Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white 5 litre PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required complete all as specified and directed.
2
-
-
... More
Providing and fixing White Vitreous China Wash basin size 630x450 mm with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require complete all as specified and directed.
2
-
-
... More
Providing and fixing unplasticised P.V.C. connection pipe with PTMT nuts, collar and bush of approved quality and colour, 15 mm nominal bore with 45cm length complete all as specified and directed.
4
-
-
... More
Providing and fixing 15 mm nominal bore C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms complete all as specified and directed.
2
-
-
... More
Providing and fixing 15 mm nominal bore C.P. brass two way bib cock of approved quality conforming to IS standards and weighing not less than 810 gms complete all as specified and directed.
2
-
-
... More
Providing and fixing 15mm nominal bore C.P. brass angle valve for urinals, basin mixer and geyser points of approved quality conforming to IS:8931complete all as specified and directed.
4
-
-
... More
S&F chromium plated Hand Shower (Health Faucet) with 8mm Dia 1.2meter long flexible tube and wall hook complete all as specified and directed.
MAKE: Prayag model No BEA-95 or techno commercially equavalent in Hindware or Parryware
2
-
-
... More
Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete all as specified and directed.
2
-
-
... More
Providing and fixing PTMT towel rail with brackets 600mm long with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour complete all as specified and directed.
2
-
-
... More
Providing and fixing PTMT grating of approved quality and colour, circular type 125 mm nominal dia with 25 mm waste hole complete all as specified and directed.
4
-
-
... More
Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms complete all as specified and directed.
2
-
-
... More
Providing and fixing P.V.C. Flexible waste pipe 32mm/40mm dia for sink/wash basin/urinal including P.V.C. waste fittings complete all as specified and directed.
2
-
-
... More
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth complete all as specified and directed.
12
-
-
... More
Providing and fixing on wall face/ laying in trenches/floors unplasticised rigid PVC rain water pipes single socketed 110mm dia conforming to IS:13592 Type A, including jointing with seal ring conforming to IS:5382, leaving 10 mm gap for thermal expansion complete all as specified and directed.
15
-
-
... More
Providing and fixing unplasticised rigid PVC bend 110mm dia, 87.5° conforming to IS:13592 Type A, including jointing with seal ring conforming to IS:5382, leaving 10 mm gap for thermal expansion complete all as specified and directed.
4
-
-
... More
M&L for approved earth (brought from outside) filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and as directed.
1.5
-
-
... More
Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earthwith lead upto 50 metres complete all as specified and directed.
16
-
-
... More
Supplying and stacking at site 90 mm to 45 mm size stone aggregate for soling of road complete all as specified and directed.
3.5
-
-
... More
Supplying and stacking at site 53 mm to 22.4 mm size stone aggregate for WBM of road complete all as specified and directed.
1.5
-
-
... More
Providing and laying in position cement concrete 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) excluding the cost of centering and shuttering - All work up to plinth level complete all as specified and directed.
3.5
-
-
... More
Providing and laying cement concrete 1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing: complete all as specified and directed.
2.1
-
-
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.complete all as specified and directed.
15
-
-
... More
Removing surplus soil to a distance not exceeding 50 mtr and deposited at a level not exceeding 1.5 mtr above from the starting point complete all as specified and directed.
13.66
-
-
... More
Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size) in pavements/foot paths, laid to required slope and camber in panels as required including consolidation finishing
and tamping complete all as specified and directed.
3.4
-
-
... More
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS:15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per Sqm, including pointing in white cement mixed with pigment of matching shade
complete all as specified and directed.
26
-
-
... More
Providing and laying non-skid ceramic floor tiles of size 300x300mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS:15622, of approved make, in all colours, shades,except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete all as specified and directed.
8
-
-
... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank 500 Ltrs capacity, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank complete all as specified and directed.
2
-
-
... More
Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball, 20 mm nominal bore, 120 mm long, weighing not less than 198 gms complete all as specified and directed.
2
-
-
... More
Providing and fixing 20mm bore gun metal gate valve with C.I. wheel of approved quality (screwed end) complete all as specified and directed.
2
-
-
... More
M&L for rendering 10mm in CM 1:3 over green surfaces of concrete padding on roof and parapets mixed with WPC @ 3% by weight or as per manufacturer's specifications complete all as specified and directed. NOTE: WPC will be measured and paid separately under relevant item of this BOQ.
16
-
-
... More
Providing and fixing 15 mm dia nominal bore G.I. pipes complete with G.I. fittings and clamps, concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall complete all as specified and directed.
6
-
-
... More
Providing and fixing 20 mm dia nominal bore G.I. pipes complete with G.I. fittings and clamps, concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall complete all as specified and directed.
13
-
-
... More
Providing and fixing factory made P.V.C. door frame wtih wood grains of size 50x47 mm with awall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer’s specification complete all as specified and directed.
9.5
-
-
... More
Providing and fixing factory made 30 mm thick with wood grains PVC door shutters consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC 'C' channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer's specification & drawing.
3
-
-
... More
Providing and fixing 100x58x1.90 mm, ISI marked stainless steel pressed butt hinges bright finished with necessary screws etc., complete all as specified and directed.
6
-
-
... More
Providing and fixing 150x10 mm aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS:1868 ) transparent or dyed to required colour or shade, with necessary screws etc., complete all as specified and directed.
2
-
-
... More
Providing and fixing 125mm aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour or shade, with necessary screws etc., complete all as specified and directed.
4
-
-
... More
Providing and fixing 300x16 mm aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc., complete all as specified and directed.
2
-
-
... More
Providing and fixing aluminium hanging floor door stopper with twin rubber, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc., complete all as specified and directed.
2
-
-
... More
M&L for Chequered precast cement concrete tiles 22 mm thick (Light shade pigment using white cement) in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning complete laid over and including 20 mm thick bed of cement mortar (1:4) complete all as specified and directed.
16
-
-
... More
Honey-comb brick work 10 / 11.4 cm thick with common burnt clay bricks of class designation 7.5 in super structure above plinth level upto floor V level with cement mortar 1:4 (1 cement : 4 coarse sand) complete all as specified and directed.
2
-
-
... More
M&L for wooden flooring 18mm thick (AC6) laid over 3 to 4mm thick foam (rubber) laid over 100 to 120 micron polythene sheet laid over existing hard flooring complete all as specified and directed.
MAKE: ACTION TESA/ GREENPLY/CENTURY PLY
140
-
-
... More
S&F book racks of approved pattern and design, made of 18mm thick plywood BWR grade type BB fixed with synthetic glue and nails/screws with and including pasting of 1.2mm thick acrylic laminate of selected colour & quality on both faces of plywood with synthetic glue, providing pressed edge acrylic beading of same colour and fixed in position complete all as specified and directed.
130
-
-
... More
M&L heavy grade hollow Wood Plastic Composite (WPC) profiles 20-25 mm thick in wall cladding/lining, wood grain coloured inclusive of solvent, beadings, top and bottom ''C" channel including all fixing arrangement at site on vertical surface of wall complete all as specified and directed.
NOTE: Pattern and design of shall be as approved by Engr-in-Charge/GE.
MAKES: BLACK COBRA/ ALEX
84
-
-
... More
M&L for 25mm bore steel water tubing, medium grade, ISI marked, galvanized, including all fittings such as bends, tees, elbows, reducers, unions, plugs, sockets etc., laid in trenches or fixed to walls and ceilings or concealed in walls and making good, ducts/ceilings or laid in floors complete all as specified and directed.
72
-
-
... More
S&F 25mm dia Gun metal, globe or gate valves with iron wheel head, ISI marked screwed both ends for iron/GI pipe and fixed complete all as specified and as directed.
2
-
-
... More
Cutting existing steel tubing 50mm dia for alterations or
additions (Each cut measured) complete all as specified and directed.
2
-
-
... More
M&L for Point wiring complete with FRLSH PVC insulated unsheathed cable 1100V grade conforming to IS:694, 1.5 Sqmm (nominal area) multistranded with copper conductor drawn through and including metallic steel conduit, medium grade, of minimum 20mm dia and conduit accessories concealed in walls/floors /ceilings/roofs OR fixed on surface with suitable clamps etc., with and including modular metal flush boxes made out of 1.6mm GI steel sheet with modular plate and frame for mounting of switches, socket outlets, regulators etc., complete including provision of FRLSH PVC insulated unsheathed 1.5Sqmm solid copper conductor as earth continuity conductor and connecting to common earth dolly for one light point/ fan point/ exhaust fan point/ call bell point complete all as specified and directed.
NOTE: Quoted rate shall be deemed to include cost of Modular flush boxes, cover plate and frame.
22
-
-
... More
Sub main wiring with 2 runs of single core 4.0 Sqmm 1100 Volts grade, FRLSH PVC insulated, unsheathed cable, copper conductor, multistranded drawn through and including rigid non-metallic PVC conduit, medium grade, of minimum 20mm dia (ISI marked) along with conduit accessories concealed or fixed on walls/roofs/floors etc, including provision of 1 run of FRLSH PVC insulated 4.0 Sqmm copper conductor (green in colour) as earth continuity conductor and connecting to common earth dolly complete all as specified and directed.
NOTE: 2 runs of cable, 1 run of earth continuity conductor and one run of PVC conduit shall be measured as unit length.
30
-
-
... More
S&F Ceiling rose, surface type bakelite, three terminal 65x50mm, ISI marked, fixed on existing junction box/wooden block complete all as specified and directed.
8
-
-
... More
S&F Modular Switch 1 way 6 Amps, 1 Module, 240 Volts, ISI marked complete all as specified and directed
22
-
-
... More
S&F Modular Socket, 6 Amps - 2/3 pin combined, 2 Module, ISI marked complete all as specified and directed.
1
-
-
... More
S&F 3 Module (100mm x 75mm) GI box alongwith modular base & cover plate for fixing modular switches/sockets in recess etc., complete all as specified and directed.
1
-
-
... More
S&F 8 Module (125mm x 125mm) GI box alongwith modular base & cover plate for fixing modular switches/sockets in recess etc., complete all as specified and directed.
2
-
-
... More
S&F Cable End Box (Loose Wire Box) for 6 way, Double door SPN MCB DB suitable for following single pole and neutral, sheet steel, MCB distribution board, 240 Volts, fixed on surface/ recessed complete with testing and commissioning etc., complete all as specified and directed.
1
-
-
... More
Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete all as specified and directed.
2
-
-
... More
S&F in repairs LED tube light fitting. 40 W, 230 Volts batten type, Single side connection included with 20 watt LED luminaire complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size all as specified and directed. MAKE: HAVELLS Cat No. REGALBATTENT8UPTO1X22 WSSBSWH with PHOTONULTRAE2.01213T8SSTL20WLED865SPC or Techno commercially equivalent of PHILIPS/WIPRO
6
-
-
... More
S&F surface/wall mounting LED tube light fitting 1 x 20Watt LED batten indoor luminaire fixed on and including round PVC/bakelite blocks(2Nos) complete set with all accessories and LED tube rod and connecting electrically with twin core flexible copper conductor cable of suitable size complete all as specified and directed. MAKE: Havells CAT No LUMILINEPLUSNEOBS20WLED865SPCSSIND or equivalent in Philips / Wipro
12
-
-
... More
S&F Exhaust fan of 300mm sweep, 1400 RPM, heavy duty metallic fan complete all as specified and directed.
MAKE: HAVELLS/CROMPTON/ORIENT
2
-
-
... More
M&L for sheet metal enclosure for pre-wired distribution board double door, powder coated SPN, 4 way 240 volts with 200 Amps rated tinned electrolytic copper bus bar with neutral link complete all as specified and directed.
2
-
-
... More
M&L for MCB, SPN, "C" curve, 10 kA, 40 Amps capacity, 240 Volts, 50 Hz complete all as specified and directed.
2
-
-
... More
M&L for MCB, SP, "C" curve, 10 kA, 6 to 32 Amps capacity, 240 Volts, 50 Hz complete all as specified and directed.
7
-
-
... More
M&L for MCB, SPN, "C" curve, 10 kA, 6 to 32 Amps capacity, 240 Volts, 50 Hz complete all as specified and directed.
1
-
-
... More
Supplying, laying, jointing, testing and commissioning 1100 volts grade, 10 Sqmm 3 core LT XLPE insulated, PVC sheathed as per IS-7098 (Part-I), 1988 with latest amendments, galvanized steel strip or wire armoured, heavy duty, electric cables, with multistranded aluminium conductor laid in trenches/ passing through pipe/duct/road crossing or fixed on poles, walls with suitable size clamps made out of mild steel flat iron including jointing material such as crimping type lugs, brass cable glands, heavy duty double compression type etc., including necessary Earthwork Excavation, sand cushioning, GI pipe and cable protection complete all as specified and directed.
70
-
-
... More
M&L for Earthing complete with copper earth plate electrode of size 600 x 600 x 3mm thick buried directly in ground (earth pit not less than 2.25m deep below the normal ground level) with top edge of plate not less than 1.5m below normal ground level connected to copper strip 20 x 3 mm as earth lead by means of bolts, nuts, washers and check nuts made out of galvanized iron or steel all as shown on Electrical Plate No. 3 of SSR Part-I including testing on completion complete all as specified and directed.
NOTES: The unit rate shall also include for earth work in any type of soil, PCC 1:3:6 type C1 chamber, 50mm thick RCC 1:2:4 type B-1 using 20mm graded stone aggregate cover slab reinforced with 6 Nos of 8mm dia TMT bars both ways, funnel with watering pipe 20mm dia medium grade, GI protection pipe medium grade 40mm dia and wire mesh complete in addition to item No. 1(a) to (e) of preamble (Notes) under sub-heading earthing, specified on Sl Page No. 446 of SSR Part-II. Copper earth Strip beyond 7.5m will be measured and paid separately.
30
-
-
... More
M&L for Earth continuity conductor with 20x3mm copper strip fixed to wall on batten or recess or chases with necessary porcelain insulators or buried in ground or drawn in conduit/pipe/wall or fixed to poles or any other indicated situation for loop earthing etc., complete all as specified and as directed.
50
-
-
... More
M&L for test point terminal block made of gun metal or phosphorus bronze of size 75x75x25mm, drilled and screwed including 3 Nos 8mm dia 25mm long hexagonal head screws complete all as specified and directed.
30
-
-
... More
M&L for epoxy insulator with one GI stud bolt with nut and washer with necessary drilling for bolt hole for holding or fixing roof / down conductor of lightning complete all as specified and directed.
120
-
-
... More
M&L for air termination single pointed aluminium rod 12mm dia and 300mm long with fixing arrangement complete all as specified and directed.
30
-
-
... More
Providing and fixing in position collapsible steel shutters with vertical channal 20x10x2mm and braced with flat iron diogonals 20x5mmsizewith top and bottom rail of T iron 40x40x6mm dia steel pullies complete with bolts, nuts, locking arrangements, stopper, handles including a painting with two coats of synthetic enamel paint over a coat of primer complete all as specified and directed.
10.15
-
-
... More
Providing and applying 3mm EPU (Epoxy Reinforced Polyutrethane) flooring system as per manufaturers instruction as appended below:-
590
-
-
... More
Surface preparation: Removing old epoxy flooring then surface is to be throughly cleaned and prepared by grinding etc to ensure that no loose concrete/foreign Matter remain on the top of surface. The surface of floring should be clean and free from dirt and dust . The surface shall be checked for moisture content prior to application of epoxy.
-
-
-
... More
Priming the surface: The cleaned surface is to be treated with cipoxy primer coat. The primer shall be applied as per the manufacture specifications shall be mixed, laid and spread on the surace using a steel trowel/serated trowel.
-
-
-
... More
Laying underlay screed: Over the primed surface, moderate grinding will be done and epoxy screed will be applied which will provide a very strong sub-base. , blended with FQ aggregates Qty to be taken depending on floor conditions (base +hardner+filler) Allow it to dry 24 hrs
-
-
-
... More
Applying sealer coat mild grinding and laying of Cipoxy sealer coat on the screed surface. Alow it to dry for 6-10 hrs
-
-
-
... More
Applying Epoxy topcoat: Over the sealer coat , high abrasion resistance EPOXY REINFORCED POLYURETHANE topcoat will applied in desired colour (Base+hardner+filler+pigment). Allow it to dry for 24 hours
MAKE: DR CIPY (PIDILITE) or equivalent Company
-
-
-
... More
Demolishing of brick work built in cement mortar work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable matrial within 50 metres lead complete all as specified and directed.
0.9
-
-
... More
Demolition of concrete in ground floors and pavings n.exc 15cm tickness (below or above ground level and removing the debries from work site complete all as specified and directed.
3
-
-
... More
Providing and laying Vitrified tiles, double charged in 600 x 600mm sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, laid on and including 12 mm thick bed of CM (1:3), jointing with grey cement slurry @ 3.3 Kg/sqm including grouting the joints with white cement & matching pigments etc., complete all as specified and directed.
64
-
-
... More
Providing and fixing factory made uPVC white colorSliding window Two track made of extruded profileswith wall thickness of 2.3mm (+- 0.2mm). Windowprofile with hollow section with multi chamber, Frame(60mm x 62mm). sash (42mm x 67mm). SlidingInterlock (One vertical length in each shutters)(45.5mm x 28mm). Glazing bead (24.5mmx 16mm)will he mitered cut and fusion welded at all corners,including drilling of holes for fixing hardware anddrainage of water etc.. making arrangement for fixingof hardware. EPDM gasket 1.2 + -0.2mm thickgalvanized steel frame (30mm x 21.5mm), Sash (30mmx 18mm), profile to be inserted in required profile,frame will be fixed to the wall with 8mm x 100mmlong fasteners. Hardware : [Touch Lock of zinc alloyed(white powder coated), steel roller system including 5mm thick glazing with selected quality glass,
aluminum track on bottom rail for two track slidingframe, wool pine for Sliding sash and interlock.] (Note: The unit rate quoted by contractor excludescost of glass and includes all other connectedaccessories. Net opening will be measured for payment purpose)(A) Area not exceeding 2.00 sqm each
5
-
-
... More
Taking down and re fixing of collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners etc complete all as specified and directed
5.25
-
-
... More
Centering and shuttering including strutting propping etc and removal of form for lintless, beams, plinth beams, girders bressumers and cantileversfoundations, footings bases of columns etc for mass concrete complete all as specified and directed.
5
-
-
... More
S&F steel reinforcement for R C C work including straigthening cutting bending placing in position and binding all complete upto above pinth level (lintle bend roof beam and slab etc), TMT bars of grade Fe 500 D or more complete all as specified and directed.
65
-
-
... More
M&L for Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) in pavements, laid to required slope and camber in panels as required including consolidation finishing and tamping complete all as specified and directed.
4.2
-
-
... More
Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings complete all as specified and directed.
368
-
-
... More
M&L 5.0mm thick figured glass, pin head type in squares not exceeding 0.5 Sqm in each pane and glazing with aluminium beading and EPDM washers complete all as specified and directed.
13
-
-
... More
M&L 4.8mm thick sheet glass, ordinary quality, frosted on one side in squares not exceeding 0.5 Sqm in each pane, fixed with EPDM washers complete all as specified and directed.
4
-
-
... More
Providing and fixing 12 mm thick pre-laminated particle board with decorative lamination on both sides flat pressed three layer or graded wood particle board conforming to IS: 12823, Grade I Type II, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc., complete all as specified and directed.
39
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements