Military Engineer Services Tender
... More
For getting the details of etenders, if you are looking for information about them from the cumbersome government websites but are tired of doing so, Bidassist comes up with a one stop solution. It collates every Eproc telangana tender on Bidassist. One can approach it for the bidding process, registration process, etc., are explained below.
Military Engineer Services - MES Tender
Civil And Construction
Building Construction
Eprocure
Opening Date28 Feb 2025
Closing Date21 Mar 2025
Tender Amount₹ 48,40,000
Costs
EMD
₹ 96,800Document Cost
₹ 500Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_MES_699680_1Tender No
8872Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
M & L Rendering 10mm thick CM (1:3) using with WPC @3% by weight of cement on fair faces of brick work or concrete or roof terrace surfaces including finishing the surfaces complete all as specified and directed. Note: WPC shall be measured and paid separately as supplied only
250
-
-
... More
Supply only Integral waterproofing compound complete all as specified and directed.
75
-
-
... More
M & L Priming the plastered roof surfaces with bituminous primer @ 0.3 Kg/Sqm and laying the APP modified water proofing membrane as per IS 16540-2017/ IS 16532-2017 mineral finish, 3 mm thick and weighing not less than 3.8 Kg/Sqm reinforced with non woven Polyester /HMHDPE matt black finished over compatible primer/bonding bitumen with 100 mm overlap after necessary preparation of surface complete as per manufacturer’s instructions with bituminous aluminium paint on top @ 0.1Ltr/Sqm complete all as specified and directed.
250
-
-
... More
M & L Earth work in excavation by mechanical means (Hydraulic excavator) means over areas (exceeding 30 cm in depth, nexc 1.5m deep,1.5 m in width as well as 10 Sqm on plan) including getting out in any kind of soil and disposal of excavated earth lead upto 50 m and lift upto 1.5m complete all as specified and directed.
25
-
-
... More
Excavation in trenches not exceeding 1.5 Mtr wide and not exceeding 1.5 mtr depth for laying cable at and getting out in soft/loose soil complete all as specified and directed.specified and directed.
37
-
-
... More
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed.
31
-
-
... More
Removing excavated material exc. 50m & n.exc 250m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.
22
-
-
... More
M & L PCC (1:4:8) type D2 (using 40mm graded stone aggregate) as in foundations filling and mass concrete complete all as specified and directed.
2.5
-
-
... More
Use and waste of Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter finished rough surfaces complete all as specified and directed.
55
-
-
... More
Use and waste of Form work to sides and soffits of floor or roof beams, beam haunching, lintel etc rough finished surfaces of concrete flat surfaces complete all as specified and directed.
30
-
-
... More
Use and waste of Formwork to sides of pillars, posts, struts, piers, columns and stanchions finished rough surfaces all as specified and directed.
40
-
-
... More
Use and waste of Formwork to edges of concrete slabs and similar work exc 10 cm but n exc 20 cm wide finished rough surfacescomplete all as specified and directed.
30
-
-
... More
Use and waste of Formwork to soffits of roof slabs, floor slabs, landings and similar work not exceeding 200mm thick finished rough surfaces complete all as specified and directed.
120
-
-
... More
M & L Providing RCC M-25 (Design mix) (using 20 mm graded stone aggregate) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.
11
-
-
... More
M & LProviding RCC M-25 (Design mix) (using 20 mm graded stone aggregate) as in beams, cantilivers, bressumers, lintel over 1.5 m Span complete all as specified and directed.
5
-
-
... More
M & L Providing RCC M-25 (Design mix) (using 20 mm graded stone aggregate) as in columns, pillars, piers, posts and struts complete all as specified and directed.
3.5
-
-
... More
M & L Providing RCC M-25 (Design mix) (using 20 mm graded stone aggregate) as in Slabs supported on walls, beams and columns complete all as specified and directed.
10
-
-
... More
M & L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.
2500
-
-
... More
All as per Item No.21 above but 6 mm to 8mm dia complete all as specified and directed.
320
-
-
... More
Demolition of brickwork or stone/boulder masonry, built in cement mortar with all quoins, arches, pillars, etc but excluding ashlar facings, dressed stone work and precast concrete articles including disposal of the rubbish out off the premises complete all as specified and as directed.
15
-
-
... More
M & L Brick work with subclass 'B' bricks, using old size bricks straight or curved on plane exc 6m mean radius built in CM (1:4) complete all as specified and directed.
25
-
-
... More
M & L Rendering 10 mm thick CM (1:4) on brick, stone or concrete surfaces finished fair & even complete all as specified and directed.
100
-
-
... More
M & L Rendering 15 mm thick thick CM (1:4) on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.
100
-
-
... More
Dismantling of floor, hearth or wall tiles/terrace roof tiles including cement mortar bedding (but not backing),removal servicable tiles to store and rubbish off the premises, all as specified and directed.
300
-
-
... More
M & L Glazed ceramic coloured wall tiles of size 300mmx450mmx 7 to 8mm thick as in vertical surfaces skirting,dado,etc set and jointed in neat cement slurry and pointed in white or colour cement to match the tiles over and including 10 mm thick backing coat in CM (1:3) complete all as specified and directed. Make:Kajaria/Johnson
30
-
-
... More
M & L Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) coloured area of each tile size 400mmx400mm, as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM (1:4) complete all as specified and directed. Make:Kajaria/Johnson
10
-
-
... More
M & L Vitrified Ceramic tiles Dark shade double/ultra charged 10 mm thick (square/ rectangular) polished, area of each tiles n exc size 0.36Sqm, as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles over and including 15 mm thick screed bed in CM (1:4) complete all as specified and directed. Make:Kajaria/Johnson
180
-
-
... More
M & L Vitrified Ceramic tiles Dark shade double/ultra charged 10 mm thick (square/ rectangular) polished, area of each tiles nexc size 0.36Sqm, in skirting/dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles over and including 10 mm thick backing coat in CM (1:3) complete all as specified and directed. Make:Kajaria/Johnson
80
-
-
... More
M & L 20-25 mm thick Machine cut kota stone slab flooring set and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing and including 15 mm thick screed bed in CM (1:4) complete all as specified and directed.
100
-
-
... More
Demolition Stone slabs and tiles/granite tiles laid in cement mortar of any description or thickness in floors, aprons etc.including disposal of the rubbish out off the premises complete all as specified and as directed.
0.2
-
-
... More
M & L 18-20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platfoRms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including laid over cement screed 15mm thick in CM (1:4) complete all as specified and directed.
30
-
-
... More
M & L Precast reinforced cement concrete (1:2:4) type B1 (using 20 mm graded stone aggregate) as in landings for WHB , cover slabs (for manholes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces set in CM(1:4) complete all as specified and directed.
0.3
-
-
... More
S & F in repairs Vitreous china wash hand basin full pedestal , white, flat back size 560x 430x195 mm etc. complete all as specified and directed. Make : Cat No:CNS-WHT-811 of Jaquar or equivalent model in Roca/Kohler.
1
-
-
... More
S & F in repairs Stop/angle valves fancy type 15mm dia, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.
Cat No:FUS-CHR-29053 of Jaquar or equivalent model in Roca/Kohler.
5
-
-
... More
S & F in repair 150 X150 mm overhead shower completed all as specified and directed.
Cat No OHS-CHR-1605 of Jaquar or equivalent model in Roca/Kohler
1
-
-
... More
S & F in repair CP health faucet with 01 Mtr tube and hook complete all as specified and directed.
Cat No: ALD-CHR-579 of Jaquar or equivalent model in Roca/Kohler
1
-
-
... More
S & F in repairs 15mm size two way bib tap fancy type chromium plated, crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.
cat no: FUS-CHR-29041 of JAQUAR or equivalent model in Roca/Kohler
1
-
-
... More
S & F in repairs Toilet paper holder with flat recessed type stainless steel complete all as specified and directed
1
-
-
... More
S & F in repairs Vitreous China wash down water closet pan (pedestal pattern) white including trap, connection to drain (outgoing pipe) and to flushing pipe, anti-syphonage pipe, including PVC jet for Pedestal pattern pan including 450/600mm long PVC connection including PTMT nuts and plastic water closet seat of white in colour, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device etc complete all as specified and directed.
1
-
-
... More
S & F in repairs 15 mm bore Fancy type pillar taps, Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and directed Cat No.FUS-CHR-29021 of Jaquar or equivalent model in Roca/Kohler
2
-
-
... More
S & F in repairs brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.
1
-
-
... More
S & F in repair brass CP soap dish , fixed to wall with CP brass screws, complete all as specified and directed.
2
-
-
... More
S & F in repairs bib tap fancy type chromium plated, crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed Make : Cat No.FUS-CHR-29021 of Jaquar or equivalent model in Roca/Kohler
10
-
-
... More
S & F 20 mm CPVC pipes SDR 13.5 & Plain CPVC SDR 11 fittings laying in trenches complete all as specified and directed.
50
-
-
... More
S & F 25 mm CPVC pipes SDR 13.5& Plain CPVC SDR 11 fittings laying in trenches complete all as specified and directed.
50
-
-
... More
Taking down 20 mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.
50
-
-
... More
Taking down 25 mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.
50
-
-
... More
M&L Cutting chases, pinning in, in brick wall making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc. and cutting chases for concealed water tubing or concealed conduit wiring etc. and making good, in cement mortor 1:3 cutting not exceeding 10cm girth complete all as specified and directed.
10
-
-
... More
S & F in repairs PVC (SWR) P trap 110mm dia complete all as specified and directed.
3
-
-
... More
S & F in repairs PVC (SWR) door Bend 150mm dia complete all as specified and directed.
3
-
-
... More
S & F in repairs PVC (SWR) door Bend 110mm dia complete all as specified and directed.
3
-
-
... More
S & F in repairs PVC (SWR) door Bend 75mm dia complete all as specified and directed.
3
-
-
... More
S & F in repairs PVC (SWR) single T 75mm dia complete all as specified and directed.
3
-
-
... More
S & F in repairs PVC (SWR) single T 110 mm dia complete all as specified and directed.
2
-
-
... More
S & F in repairs PVC (SWR) single T 150 mm dia complete all as specified and directed.
2
-
-
... More
S & F in repairs PVC (SWR) pipes 75mm bore double socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed
15
-
-
... More
S & F PVC (SWR) pipes 75mm bore double socketed, in any length with rubber ring joints, fixed on walls complete all as specified and directed
15
-
-
... More
S & F PVC (SWR) pipes 110mm bore doubled socketed, in any length with rubber ring joints, fixed on walls complete all as specified and directed
15
-
-
... More
S & F in repairs PVC (SWR) pipes 110mm bore double socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed
15
-
-
... More
S & F PVC (SWR) floor trap 75mm dia, plain with SS grating including jointing with solvent cement complete all as specified and directed.
2
-
-
... More
S & F in repairs Grating doom 100mm dia of SS. (Minimum weight 85gms) complete all as specified and directed.
10
-
-
... More
S&F Rotational moulded polyethylene water storage tank 3 layer white colour water tank , non- toxic effect, algae formation protection (made from Virgin grade of polyethylene material which is duly stabilized with anti-oxident Plastic) of capacity 1000 litres, (cylindrical vertical one piece moulded with closed top), the internal and external surfaces of tanks are smooth, clean and free from any hidden internal defects, hoisted and fixed in position including S & F necessary GI fittings, inlet/outlet washout, overflow pieces long nipples, checknuts & washer, 20mm size Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 210gms) and stop valves for 20mm bore pipe, cast copper alloy, screwed down high pressure with crutch or butterfly handle screwed both ends etc complete including dismantling existing water tank all as specified and directed. MAKE :- Cat No. HSWS-0100-01-Pure of M/s SINTEX
4
-
-
... More
S & F in repairs 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as directed.
1
-
-
... More
S & F in repairs 25mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as directed.
1
-
-
... More
S & F in repairs PVC connections 15 mm size with PTMT nuts of length 600 mm complete all as specified and directed
5
-
-
... More
S & F in repairs PVC LDPE waste pipe 32mm dia 1m length complete all as specified and directed
5
-
-
... More
S & F in repairs standard wall mount stainless steel hand sink features a countertop edge with an offset to guard against drips and overflow, 1.00mm thick for kitchen or laboratory, with plug, wastepipe, washers, including cantilever castiron brackets, connecting union etc., overall size 2.3m X 0.45m with bowl size 2.0m X 0.35m X 0.4m complete all as specified and as directed.
Note: Effective/clear dimensions of sink can be varried by ±5% with prior approval of Engr in Charge
2
-
-
... More
Taking down chowkhats or frames with shutters (w/o taking off shutters from the frames) n exc 1.5 Sqm each etc including making good of hold fast holes with PCC (1:3:6) type C1 complete all as directed by Engr-in- Charge
10
-
-
... More
Taking down chowkats or frames with shutters (w/o taking of shutters from the frame) exc 1.5 but n.exc 4 Sqm each etc making good of hold fast holes with PCC (1:3:6) type C1 complete all as directed by Engr-in- Charge
17
-
-
... More
S & F Factory made uPVC white colour Two track two panels sliding glazed window upto 1.50m height made of (small series) frame 52 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window upto 1.75 sqm) comprising of uPVC multi-chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately)
Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.
17
-
-
... More
M & L for 4 mm thick tinted sheet glass, ordinary quality and fixed with glazing clips and oil putty in squares exceeding 0.5 Sqm in Each pane.
5
-
-
... More
S & F 4 mm thick tinted sheet glass frosted, ordinary quality and glazing with oil putty in square Nexc 0.5 sq. m in Each pane complete all as specified and directed.
2
-
-
... More
S & F Factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 Sqm) comprising of uPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll foRming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 Kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Make: Rajshri or equivalent as approved by GE.
25
-
-
... More
M & L for 4.8 mm thick tinted sheet glass, ordinary quality and fixed with glazing clips and oil putty in squares exceeding 0.5 Sqm in Each pane complete all as specified and directed.
30
-
-
... More
M & L 4.8 mm thick tinted sheet glass, ordinary quality and fixed with glazing clips and oil putty in squares not exceeding 0.5 Sqm in Each pane complete all as specified and directed.
8
-
-
... More
S & F Factory made uPVC white colour Casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension.
(Area of door upto 2.00 Sqm) comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll foRming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on Each side of panels along with zinc plated mild steel multi point locking having
transmission gear, cylinder with keeps and one side key, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws,etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality complete all as specified and directed by Engineer-in- Charge. (Glass shall be paid separately) Note: For uPVC frame, sash and mullion extruded
profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.
4
-
-
... More
S & F 5.5 mm thick tinted sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane complete all as specified and directed.
2
-
-
... More
S & F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.
30
-
-
... More
S & F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 Kg/Cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately) complete all as specified and directed.
Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made
20
-
-
... More
S & F Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 Kg/Cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being teRmite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer- In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately).
7
-
-
... More
S & F Factory made Double extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 Kg/Cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being teRmite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately)
Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete all as specified.
15
-
-
... More
S & F 35mm thick IInd class hard wood glazed and skelton shutters, open rebated and prepared to receive glass, gauze etc. divided in to square with plain chamfered or rounded mitred and rebated sash bars, any numbers, edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc, size of members of shutters as per ISI and all as specified in SSR Pt –I complete all as specified and directed.
5
-
-
... More
S & F 35mm thick IInd class hard wood Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.
5
-
-
... More
M & L Preparation of surfaces of wood and wood based material description over 10cm in width or girth applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
25
-
-
... More
S & F 125 mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-22 complete all as specified and directed.
27
-
-
... More
S & F 300mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.
16
-
-
... More
S & F 200 mm long Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.
18
-
-
... More
S & F 150mm Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.
18
-
-
... More
M & L 140 mm long Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor ccomplete all as specified and directed.
17
-
-
... More
S & F 18 mm thick UV coated exterior grade MDF board duly edge banded with 0.8 mm thick PVC taping, fitting of shutters shall be fixed as approved by GE suitable for cup board etc. including taking down with existing one complete all as specified and directed. Make: Action tesa, Century, Kitply
10
-
-
... More
S & F Shelves made of HDHMR (high density high moisture resistance) board manufactured with hard wood, prelaminated both sides white in colour 18 mm thick water resistant, termite resistant, duly edge banded with PVC taping 0.8 mm thick, cut to shape & size of shelves including dismantling board complete all as specified and directed. Make: Action tesa, Century, Kitplys
15
-
-
... More
M & L for 0.9 mm thick colour/ white laminated sheet fixed to wooden surface with glue complete all as specified and directed.
3
-
-
... More
S & F 100mm size hasp and staple, safety type, aluminum anodized with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.
5
-
-
... More
S & F 40mm dia cupboard knobs fixed with nut screw & washer or brass polished complete all as specified and directed.
10
-
-
... More
S & F ball catch spring 8mm dia steel ball and brass body and striking plate including letting in complete all as specified and directed.
10
-
-
... More
S & F in repairs brass chromium plated tubular curtain rod 20mm dia. complete all as specified and directed.
40
-
-
... More
S & F in repairs brass chromium plated brackets/ end globes complete all as specified and directed.
25
-
-
... More
S & F in repairs 300 mm MS ordinary rat tail rod pattern springs and including roller and roller plate complete fixed complete all as specified and directed.
2
-
-
... More
S & F in repair Aluminium Door closer hydraulically regulated designation No.3,universal type ,suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg complete all as specified and directed.
5
-
-
... More
M & L for preparartion of new wall surfaces and applying two coats of OBD (oil emulsion) over a coat of alkali resistant primer over 3mm thick wall care putty in two layers complete all as specified and directed.
100
-
-
... More
M & L Preparartion of new ceiling surfaces and applying two coats of OBD (oil emulsion) over a coat of primer including 3mm thick wall care putty in two layers complete all as specified and directed.
100
-
-
... More
M & L Preparation of newly plastered external wall & concrete surfaces & applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 Sqm over Two layers of putty 3mm thick and including priming coat of exterior primer applied @ 0.90 litre/ 10 Sqm over wall/concrete surfaces of any height complete all as directed.
100
-
-
... More
M & L Complete removal of existing treatment of external wall surfaces & applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 Sqm over Two layers of putty 3mm thick and including priming coat of exterior primer applied @ 0.90 litre/ 10 Sqm over wall/concrete surfaces of any height complete all as specified and directed.
350
-
-
... More
M & L Complete removal of existing treatment of old plastered internal surfaces of wall and applying two coats of OBD (oil emulsion) over a coat of primer including 3mm thick wall care putty in two layers complete all as specified and directed. .
450
-
-
... More
M & L Complete removal of existing treatment of old plastered ceiling surfaces and applying two coats of OBD over a coat of primer including 3mm thick wall care putty in two layers complete all as specified and directed. .
200
-
-
... More
M & L Preparing old steel surfaces of any description exc 10cm width or grith and applying one coat of synthetic enamel paint complete all as specified and directed.
10
-
-
... More
M & L Preparing old wooden surfaces of any description exc 10cm width or grith and applying one coat of synthetic enamel paint complete all as specified and directed.
10
-
-
... More
M & L Preparing old wooden surfaces of any description nexc 10cm width or grith and applying one coat of synthetic enamel paint complete all as specified and directed.
10
-
-
... More
S & F GI frame work Size of grid 605 x 605mm for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/inteRmediate channel 0.9 mm thick having two equal flanges of 15 mm Each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm Each with lips of 10.5 mm fixed to the inteRmediate channel with connecting clips across the inteRmediate channel at 457 mm centre to centre and Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified.
168
-
-
... More
M & L Providing and fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions complete all as specified and directed.
168
-
-
... More
M & L Preparation of new gypsum board ceiling surfaces and applying two coats of OBD (oil emulsion) over a coat of alkali resistant primer over plaster of paris putty of 1 mm thickness on ceiling surface complete all as specified and directed.
168
-
-
... More
M & L Applying 3mm thick wall care putty on old wall /concrete surfaces complete all as specified and directed.
10
-
-
... More
M & L Wire netting with size of mesh 25mm of stainless steel wire 1.4mm dia fixed with tinned tacks of stainless steel wire staples all as per manufacturers instructions and as directed by Eng-in-charge.
Note: Unit rate quoted will be inclusive of necessary arrangements for scaffolding or using ladders inorder to work at higher heights. No additional payment will be done on the same.
60
-
-
... More
S & F Bands, straps, clamps, hold fasts, wall ties, hooks, plain angle cleats for securing wire netting to the wall surface/any other surrounding surface along with knee piece inserts; two way and three way straps, plate washers and similar small articles have screwed, ends including keys, cotters, wedges, etc. if necessary including welding conforming to Fe-290 Gde-E-165 complete all as specified and as directed.
Note: Unit rate quoted will be inclusive of necessary arrangements for scaffolding or using ladders inorder to work at higher heights. No additional payment will be done on the same.
250
-
-
... More
S & F Mild steel screw bolts of dia 5 to 10 mm(machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm long n exc 10 cm long complete all as specified and as directed.
20
-
-
... More
M & L for PVC wear-resisting coat, fiber-glass reinforced layer and PVC Foaming buffer layer and PVC (100%) wear-resisting coat has been processed with age inhibiting and tightening techniques, performing well in resisting wear and pressure and the fiber-floss reinforced layer could help stabilise the court size and prolong the service life, Making the floor unable to shrink to achieve steady performance which would surely help the athletes to obtain better achievements. and the design of the enclosed PVC foaming buffer layer imitates the air bed and achieves ultimate performance in rebounding and absorbing shock, hence guaranteeing the safety and the shock absorption rate attains 30% to 50% all as per manufacturers instructions and as directed by Eng-in-charge.
Country of Origin: Japan Total thickness – 4.5 mm BWF Approved Color : Green
Service Life: 15 years
Make: YONEX BWF Certified 4.5 MM VINYL FLOORING
90
-
-
... More
S & F Movable Badminton Pole with Net complete set of each pair as per manufacturers instructions, and as directed by Eng-in-charge.
1
-
-
... More
M & L Preparation of new steel surfaces of any description, over 10 cm in width or girth, not otherwise described, applying two coats of synthetic enamel paint over red oxide, zinc chrome primer complete all as specified and as directed.
30
-
-
... More
Taking down existing unserviceable point wiring of any description/type/ size of light/ fan/tube/power/two way/bell point etc on TW batten/conduit including removal of batten / conduit / gutties / wooden boards / switches / sockets / regulators/ light fittings etc and removal of unserviceable material out of site and making good the disturbed surfaces of wall/ceiling so as to match with the existing finishes complete all as specified and directed.
106
-
-
... More
Taking down the existing unserviceable main switch / cut out / DBs of any type / capacity / description as per existing at site including making good the disturbed surfaces to match with the existing finishes complete all as specified and directed.
2
-
-
... More
M & L Point wiring on concealed conduit with 1.5 Sq mm FRLS copper conductor single core PVC insulated sheathed 1100 V multistranded drawn through including rigid PVC conduit of dia medium grade and modular accessories including fixing/grouting sunken/ surface along with modular flush box of sutiable thickness covered with suitable modular cover plate including running up of 1.5 Sq mm FRLS copper conductor PVC insulated cable as earth continuity conductor along with wiring and connecting to the common earth dolly for fixing the switches/ sockets/ regulators etc for one light/fan/Bell point controlled by one, one way switch 5A, SP. complete all as specified and directed. Note: Rate of Modular Flush box and Cover plate are inclusive of rate quoted by the contractor
55
-
-
... More
All as per Item No. 124 above but one 3 pin 5 Amps switch socket outlet point controlled by one switch on the same board.
10
-
-
... More
All as per Item No. 124 above but one 3 Pin 5 Amps switch socket Independt board.
16
-
-
... More
All as per Item No. 124 above but using 2.5 Sq mm FRLS single core copper conductor cable of multistranded PVC insulated unsheathed 1100 Volts grade for 5/15 Amps switch socket combination point including running of 2.5 Sq mm FRLS copper conductor PVC wire as earth continuity conductor along with wiring and connecting to the common earth dolly.
25
-
-
... More
S & F Modular switch 1 way 6/10 A, 1 Module capacity 230 volts. complete all as specified and directed.
81
-
-
... More
S & F Modular switch 1 way 16 A, 1 Module capacity 230 volts.complete all as specified and directed.
25
-
-
... More
S&F Socket outlet modular type 2/3 Pin, 10 amps, 230 volts combined 2 Module complete all as specified and directed.
26
-
-
... More
S&F Socket outlet modular type multipurpose 2/3 Pin, 6/16 amps, 230 volts combined 2 Module complete all as specified and directed.
25
-
-
... More
S & F in replacement of Single pole and Neutral enclosure with a two pin and earth plug and socket metal clad complete with one singlepole MCB 20 Amps (AC Box) complete all as specified and directed.
12
-
-
... More
S & F in replacement of Triple pole and earth enclosure with a three pin and earth plug with socket metal clad complete with one triple pole MCB 32 Amps (AC Box) complete all as specified and directed.
2
-
-
... More
S & F Ceiling rose three terminal surface bakelite type AC 50 Hz 230 Volts of size 65 x 50 mm complete all as specified and directed.
39
-
-
... More
S&F in replacement sheet metal enclosure vertical type MCCB DB TPN 6 way double door with suitable rated bus bar 415 volts suitable for and including 200 Amps MCCB 25 KA as incomer and 03 Nos outgoing TP MCBs of 63 Amps and 9 Nos outgoing SP MCBs with suitable rated copper bus bar with neutral link including provision for MCCB TPN as incomer and SP/TP MCBs as outgoing and total number of modules equal to MCCB TPN + 18 with blanking plates and fixed flush to wall and making good the disturbed surfaces etc, with magnetic locking system complete all as specified.
1
-
-
... More
Supply, fix, connecting in replacement and testing factory made, distribution board, (MCB DB) TPN, 4 Way, having degree of protection IP 43-IK 09 with metal double door, 415 Volts, flush type made out of 1.2 mm thick thick CRCA sheet, metal duly powder coated and confirming to IS 8623 with suitable rated copper bus bar with neutral link including provision for MCB TPN as incomer and SP MCBs as outgoing and total number of modules equal to MCB TPN + 12 with blanking plates and fixed flush to wall and making good the disturbed surfaces etc, complete all ass specified and as directed. Note: MCB TPN and MCB SP will be measured and paid seperately.
1
-
-
... More
Supply, fix, connecting and testing MCB, Triple Pole Neutral (TPN) 63/100 Amps, 415 Volts of rupturing capactiy 10 KA, 'C' Series complete all as specified and as directed.
1
-
-
... More
M & L Chipping the wall for fixing of DB and plastering the distrubed surface along with putty and existing colour all as specified and directed by Engg in Charge.
2
-
-
... More
S and F in replacment of sheet metal enclosure MCB DB SPN 12 way with suitable rated bus bar 240 Volts double door with magnetic locking system complete all as specified.
5
-
-
... More
Supply, fix, connecting in replacement and testing MCB, Single Pole Neutral (SPN) 40 to 63 Amps, 415 Volts of rupturing capactiy 10 KA, 'C' Series complete all as specified and as directed.
5
-
-
... More
Supply, fix, connecting and testing MCB, Single Pole (SP), 5-32 Amps, 240 volts of rupturing capacity 10 KA, 'C' series complete all as specified and as directed.
60
-
-
... More
S & F in replacement of wall mounted batten type LED light of 12 watts with aluminium extruded batten and system lumens of 1200 lm minimum with IP & surge protection alongwith driver efficiency 85% and power factor 0.95 , colour rendering index CRI80 along with integrated driver complete and connecting to the point wiring with necessary flexible copper conductor of multistrand three core of suitable length from fitting to the ceiling rose all as directed by Engineer-in-charge. Make: Philips Model BN021 LED12S PSU GR or equivalent model in Havells/Wipro/GE.
2
-
-
... More
S & F in replacement of wall mounted batten type LED light of 22 watts with aluminium extruded batten and system lumens of 2200 lm minimum with IP & surge protection alongwith driver efficiency 85% and power factor 0.95 , colour rendering index CRI80 along with integrated driver complete and connecting to the point wiring with necessary flexible copper conductor of multistrand three core of suitable length from fitting to the ceiling rose all as directed by Engineer-in-charge. Make: Philips Model BN021C LED22S or equivalent model in Havells/ Wipro/GE.
18
-
-
... More
Supply, fix, test and commissioning of Decorative wall mounting fixture of 09 Watts in durable plastic body and designer mesh in gold finish suitable for 9 W LED lamp complete with all accessories all as per Cat No LHFOECE1TZ1B014 of Havells or techno- commercially equivalent of other specified makes connecting up with and including twin/ three core twisted flexible copper conductor cable of suitable size etc. complete all as specified and as directed.
6
-
-
... More
S & F of LED Luminarie 600mmx600mm 35/36 watts, 220 volts AC recessed mounting light fixture type with high efficiency PMMA diffuser soft glare free light complete with driver, holders and LED lamp suitable for roof ceiling including connecting up with driver 3 core flexible copper conductor cases of suitable size complete with lumianrie system efficacy 100 lm/w with IP & surge protection of 10 kV, power factor 0.95 complete with all accessories all as specified and directed by Engg-in-Charge.
10
-
-
... More
S & F in replacement of Security Lights of 25 watt LED light with high power LED and unique peanut lens to ensure uniform distribution with suitable pipe bracket 32 mm dia 0.60 Mtr length fixed on wall with suitable flat iron clamps and nut bolts including provision of 1.5 sqmm 3 core multistranded copper conductor cable from light fitting to junction box complete all as specified and directed by Engg-in-Charge. Make: Havells Model NDURASUNDOWNSL25WLED765PASYBOPCIHD or equivalent model in Philips/ Wipro/GE
3
-
-
... More
M & L Submain wiring with four single core 10 Sq mm FRLS PVC insulated copper conductor multistranded 1100 Volts grade drawn through and including rigid PVC conduit and concealed conduit accessories of suitable dia medium grade including running up of one runs of 10 Sq mm FRLS copper conductor multistranded PVC insulated cable as earth continuity conductor along the wiring and connected to the common earth dolly complete including removing the existing unserviceable sub main wiring and making good the disturbed surface to match with the existing all as specified. Note:-Four runs of cable, one run of earth contuinity conductor and one run of conduit shall be measured and paid as one unit length.
40
-
-
... More
M & L Submain wiring with four single core 6 Sq mm FRLS PVC insulated copper conductor multistranded 1100 Volts grade drawn through and including rigid PVC conduit and concealed conduit accessories of suitable dia medium grade including running up of one runs of 6 Sq mm FRLS copper conductor multistranded PVC insulated cable as earth continuity conductor along the wiring and connected to the common earth dolly complete including removing the existing unserviceable sub main wiring and making good the disturbed surface to match with the existing all as specified. Note:-Four runs of cable, one run of earth contuinity conductor and one run of conduit shall be measured and paid as one unit length.
60
-
-
... More
M & L Submain wiring with two single core 10 Sq mm FRLS PVC insulated copper conductor multistranded 1100 Volts grade drawn through and including rigid PVC conduit and concealed conduit accessories of suitable dia medium grade including running up of one runs of 10 Sq mm FRLS copper conductor multistranded PVC insulated cable as earth continuity conductor along the wiring and connected to the common earth dolly complete including removing the existing unserviceable sub main wiring and making good the disturbed surface to match with the existing all as specified. Note:-Two runs of cable, one run of earth contuinity conductor and one run of conduit shall be measured and paid as one unit length.
90
-
-
... More
M & L Submain wiring with two single core 4 Sq mm FRLS PVC insulated copper conductor multistranded 1100 Volts grade drawn through and including rigid PVC conduit and concealed conduit accessories of suitable dia medium grade including running up of one runs of 4 Sq mm FRLS copper conductor multistranded PVC insulated cable as earth continuity conductor along the wiring and connected to the common earth dolly complete including removing the existing unserviceable sub main wiring and making good the disturbed surface to match with the existing all as specified. Note:-Two runs of cable, one run of earth contuinity conductor and one run of conduit shall be measured and paid as one unit length.
160
-
-
... More
M&L Providing Earthing complete with galvanised steel earth plate electrode 60cm x60cm x6mm thick buried directly in ground earth pit not less than 2.25 mtr deep below normal ground level ) with top edge of plate not less than 1.5m below ground level, connecting to the Galvanised iron earth earth lead 4 mm dia, by means of nuts, bolts, check nuts and washer etc of galvanised iron and earth lead protected by provision of GI pipe light grade 15mm bore from earth elelctrode to test point incl provn of concrete pit in PCC (1:2:4) type B-1 using 20mm graded stone agagregates with 40mm thick cover of RCC (1:2:4) reinforced with XPM (weight not less than 4Kg/Sqm) and frame of angle iron 25 x 25x6mm with lugs 2 Nos and with 6mm dia MS bar handle made to shape, GI pipe light grade 20mm bore pipe for watering perforated at bottom 1.75 mtr long placed on top edge of earth plate, common salt and charcoal filling test point made out of Bronze/Gun metal with fixing arrangement, funnel, wire mesh and earth work in hard/dense soil, returning in and removal of surplus soil to a distance not exceeding 50mtr, all as per electrical plate No 5 of SSR Part-I and connection to earth test point all as specified incl testing on completion. Note :- Item of Earthing includes cost of 7.5m long galvanised iron earth lead 4 mm size and protection pipe of 15 mm bore GI light grade.
2
-
-
... More
Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) including provision of PVC insulated copper flexible cord from ceiling rose to connection of ceiling fan complete all as specified.
12
-
-
... More
S&F Exhaust fan, steel body AC single Phase. 230V of size 300 mm sweep with, blades, and frame & louvers connecting up with and including provision of PVC insulated copper flexible cord from ceiling rose to connection of exhaust fan complete all as specified and directed.
4
-
-
... More
Taking down unserviceable ceiling fan/ exhaust fan, sealing cable end,dismantling blades and removing fan and blades to store complete all as specified and directed.
8
-
-
... More
S&F Electric Water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate,NRV,connection piece including 2 Nos 15 mm dia flexible barbed connecting pipe 45 cm long suitable for hot water supply with brass check nuts complete all as specified and as directed. Make: Model CALENTA of Product code 150801 of Bajaj or Heatbot-SZS-Digital model of AO Smith or ominis model of Racold.
1
-
-
... More
Taking down unserviceable geysers of capacity 25/50 Ltrs from its mounting position by removing all water and electric connections ,de-assembling the geyser and shifting the whole unit of geyser to MES Store complete all as specfied and directed by Engg in Charge.
1
-
-
... More
S&F Rigid non-metallic PVC conduit 20 mmexclusive of boxes (junction/terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc.complete all as specified and directed.
30
-
-
... More
M&L Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and directed by Engineer-in-Charge.
30
-
-
... More
Taking down serviceable tube lights of any type and refixing of the same in any location as per site requirement as directed by Engineer-in- Charge
10
-
-
... More
Supply and install kitchen chimeny with following accessories complete all as specified and directed by Engineer-in- Charge:- (a) 22 Gauge SS sheet kithcen hoods assemble - 12 RFT (b) GI ducting 24 SWG - 450 SFT (c) GI Sheet 22g volume control dampers - 04 Each (d) Exhaust blower 3500 CFM 2 HP motor - 01 Each (e) Polister canvas for exhaust units - 01 Each
1
-
-
... More
S&F MK1 DOL Starter suitable for operating of 3 phase, 415V , 50 HZ 2 HP motor alongwith all electrical required connections complete all as directed by Eng-in-charge.
1
-
-
... More
Supplying, laying, jointing, testing and commissioning 1100 volts grade, 3.5 core,50 sqmm LT XLPE insulated, PVC sheathed as per IS-7098 (Part-I), 1988 galvanized steel strip or wire armoured, heavy duty, electric cables, with multistranded aluminium conductor laid in trenches/ passing through pipe/duct/road crossing or fixed on poles, walls with suitable size clamps made out of mild steel flat iron including jointing material such as crimping type lugs, brass cable glands, heavy duty double compression type etc., including taking down unserviceable cable complete all as specified and directed.
Note : Earthwork Excavation, sand cushioning GI pipe and cable protection will be measured and paid separately.
90
-
-
... More
Supply and spread sand in trenches for cable cushioning including watering and consolidation all as specified Note : For the purpose of payment punned thickness only will be measured.
4
-
-
... More
Supplying and laying reinforced precast concrete cable cover, Class LV, Type I, flat, size 250 mm x 150mm x 40mm complete all as specified and directed.
260
-
-
... More
M & L PCC (1:3:6) type C2 (using 40mm graded stone aggregate) as in foundations of poles,filling and mass concrete complete all as specified and directed.
4
-
-
... More
S&F in replacement of 20W All-In-One Solar Street Light Is Compact & Fully Integrated Intelligent Designed Luminaire * 100% Solar Powered, 100% Energy Saving * No Cable Required, Easy To Install & Shipping * Built-In PIR Sensor, Can Adjust Light Output Automatically * Modern Portable Design Can Be Installed Anywhere * Compact Volume Can Save Freight And Installation Costs * Rust-Proof Aluminum Housing, Dustproof And Waterproof General Information Product Category Solar All in one Street Light System Wattage 30W PIR Sensor Yes Luminaire efficacy 110 Lm/Watt Correlated Color Temperature 6000K±500K Color Rendering Index 70 Storage Temperature Range -10°C to + 45°C Operating Temperature Range 0°C to + 45°C Visual Angle 120° Solar Panel 48W-(±4W) (MONO) Battery (Li-ion) 11.1 V 24 Ah (BIS Certified) Charge Controller MPPT Charge Controller Efficiency ≥90% LED Lamp Life 50000 Hours Autonomy 2 Days With Dimming Charging Time 1 DAY Pole Dai In MM 50-100mm Dimensions 1210 x 340 x 45 mm ± 5 mm Protection IP 65, complete all as specified and as directed by Eng-in-charge. Make: Bajaj Product Cat. Ref. SUNSOKO AIO – BSZSL 30L or Equivalent in Philips/Havells including galvanized steel pole
4
-
-
... More
S&F 40 mm dia Galvanised Iron tubing (light grade) as in protection of cable at road crossing/hard standing/pole protection fixed with MS clamps, nut bolts and washer as per site requirement including taking down old unserviceable pipes complete all as specified and directed.
6
-
-
... More
M&L in repairs, Earthing complete with galvanized steel earth plate electrode of size 600 x 600 x 6mm thick buried directly in ground (earth pit not less than 2.25m deep below the normal ground level) with top edge of plate not less than 1.5m below normal ground level connected to GI strip 32x6 mm as earth lead by means of bolts, nuts, washers and check nuts made out of galvanized iron or steel all as shown on Electrical Plate No. 3 of SSR Part-I including testing on completion complete all as specified and directed by Eng-in-charge.Note 1: The unit rate shall also include for earth work in any type of soil, PCC 1:3:6 type C1 chamber, 50mm thick RCC 1:2:4 type B-1 using 20mm graded stone aggregate cover slab reinforced with 6 Nos of 8mm dia TMT bars both ways, funnel with watering pipe 20mm dia medium grade, GI protection pipe medium grade 40mm dia and wire mesh complete in addition to item No. 1(a) to (e) of preamble (Notes) under sub-heading earthing, specified on Sl Page No. 422 of SSR Part-II.
2
-
-
... More
S&F Weather proof outdoor bus bar chamber made out of 3mm thick MS sheet comprising 4 Nos aluminium strips each of 600Amps, 60cm long duly insulated mounted on insulators including 100 Amps MCCB 25 KA 4 Pole with 4 No’s mounting legs made out of 25mm x 25mm x 6mm angle iron grouted in PCC block of size 30cm x 30cm x 90cm (30cm depth below ground level and 60cm above ground level) in cement concrete 1:3:6, type C-2 (using 40mm grade crushed stone aggregate), and connections with suitable size of aluminium thimbles, nuts, bolts & washers, cable glands at entry and outlet points and excavation, earth work, returning filling in and removal of surplus soils including taking out old unserviceable bus bar chamber complete all as specified and directed.
1
-
-
... More
Supply and lay, galvanized tubing 25 mm bore, medium grade ISI marked, ISI marked including all fittings such as bends elbows , tees, short pieces , connectors,, backnuts, diminishing pieces , caps, plugs, and unions, etc laid in trenches complete all as specified and directed.
90
-
-
... More
S&F 25 mm gate valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed
3
-
-
... More
S&F 20 mm bore Galvanized tubing (medium grade) ISI marked, including all fittings such as bends elbows , tees, short pieces , connectors, backnuts, diminishing pieces , caps, plugs, and unions, etc laid in trenches complete all as specified and directed.
151
-
-
... More
S&F 20 mm dia gate valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed
2
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%