Military Engineer Services Tender
For getting the details of etenders, if you are looking for information about them from the cumbersome government websites but are tired of doing so, Bidassist comes up with a one stop solution. It collates every Eproc telangana tender on Bidassist. One can approach it for the bidding process, registration process, etc., are explained below.
Costs
EMD
₹ 1,00,000Document Cost
₹ 500Tender Fee
Refer Documents
Summary
Repair To Ro Plant, Stp, Ofi, Mechanical Laundry, Oxygen Manifold System, Repair / Renewal Of Lt Oh Line, Lt Ug Cable, Lr Panel, Street Lights And Allied Works At Cda/ Dad Complex Age Em Ii And Repair Maintenance, Overhauling Of Dg Sets, Amf Panel A
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_MES_697291_1Tender No
GE (U)/SEC/TOKEN 39 OF 2024-25Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
Auxiliary contacts
3
-
-
... More
Contactor relay M L 1, 3 phase 415 volts
3
-
-
... More
Contactor relay M L 2, 3 phase 415 volts
3
-
-
... More
Auxiliary relay
3
-
-
... More
Revenger (Reverse Forward)
3
-
-
... More
Main Motor -V-belt
6
-
-
... More
Motor bearings
3
-
-
... More
Blower bearings
3
-
-
... More
Reduction gear bearings
3
-
-
... More
Main bearing
3
-
-
... More
Solenoid valve
6
-
-
... More
Push button
6
-
-
... More
Steam strap 15mm
3
-
-
... More
Door Locks
3
-
-
... More
Door Beading
3
-
-
... More
Exhaust Fan/Blower
3
-
-
... More
1/2" Steam Valve
3
-
-
... More
3/4" Steam Valve
3
-
-
... More
Reduction gear V-belt
6
-
-
... More
Brake actuator
3
-
-
... More
Supply & Fixing in Replacement of following spare parts suitable to Hydro Extractor of capacity 25Kg including taking down old unserviceable spare parts complete all as specified and directed for Make of Hydro extractor :Supershine
-
-
-
... More
Contactor M L 1, 3 phase, 415 volts
2
-
-
... More
Timer relay
3
-
-
... More
Transformer
3
-
-
... More
Timer
3
-
-
... More
Buffer
3
-
-
... More
Limit switch
3
-
-
... More
Main motor bearings
3
-
-
... More
Push button
4
-
-
... More
Motor to body springs
4
-
-
... More
Rubber bush for Hydro Extractor
3
-
-
... More
Hydro Extractor motor bearings
3
-
-
... More
Bridge rectifier
3
-
-
... More
Diode
3
-
-
... More
Body Spring support Bolts
3
-
-
... More
Bush
3
-
-
... More
Supply & Fixing in Replacement of following spares suitable to Washing machine 50Kg, including taking down old unserviceable spare parts complete all as specified and directed for Make of washing machine: Supershine
-
-
-
... More
Digital Temperature meter
3
-
-
... More
Timer
3
-
-
... More
Contactor relay M L 1, 3 phase, 415 volts
5
-
-
... More
Contactor relay M L 2, 3 phase, 415 volts
5
-
-
... More
Relay M L 1, 3 phase, 415 volts
3
-
-
... More
Relay M L 2, 3 phase, 415 volts
3
-
-
... More
Revenger (Reverse Forward)
3
-
-
... More
Water Level Indicator
3
-
-
... More
Steam solenoid Valve
3
-
-
... More
Drain valve actuator
3
-
-
... More
Main motor V-belt
9
-
-
... More
Aux Motor V-belt
9
-
-
... More
Washing Machine main bearing
3
-
-
... More
Reduction gear bearing
3
-
-
... More
Water inlet solenoid valve suitable for 50 kg washing machine
3
-
-
... More
Water outlet solenoid valve suitable for 50 kg washing machine
3
-
-
... More
Gland rope
24
-
-
... More
Main motor bearings
3
-
-
... More
Aux Motor bearings
3
-
-
... More
Toggle switch
3
-
-
... More
Supply & Fixing in Replacement of following spare parts suitable to Boiler of capacity 600Kg/Hr including taking down old unserviceable spare parts complete all as specified and directed for Make of boiler: Thermax
-
-
-
... More
Gland Washer (HTN-8)
8
-
-
... More
Valve seat Assembly
3
-
-
... More
Metallic Hose 3/8" x 40"
3
-
-
... More
Oil Seal (HTN-5)
3
-
-
... More
Oil Seal (HCA-7)
3
-
-
... More
Ball Bearings (HCA-5)
3
-
-
... More
Pressure Switch PVF 1.0
3
-
-
... More
Pressure Switch PVF 16
3
-
-
... More
Metallic Hose 1" x 1.2m
3
-
-
... More
Limit Switch
3
-
-
... More
Photocell 8205
3
-
-
... More
Sequence controller MA 810
3
-
-
... More
Solenoid Coil
2
-
-
... More
Electrode Assembly
3
-
-
... More
Electrode Cap
3
-
-
... More
High Tension Wire
5
-
-
... More
Packing Hylam
2
-
-
... More
Packing Asbestos
2
-
-
... More
Gland Nut (HTN-6)
2
-
-
... More
Oil Level Indicator
1
-
-
... More
Sight glass 50mm
2
-
-
... More
Ignition Transformer 14.5 KV
1
-
-
... More
Temperature Controller 0-400V
1
-
-
... More
RTD Assembly 2.5 mtrs
1
-
-
... More
Safety valve 25mm
1
-
-
... More
Plug & Socket
2
-
-
... More
Hooter 4" Dia
1
-
-
... More
Lip Seal
2
-
-
... More
Spider for love joy couple
1
-
-
... More
Burner rod Without nozzle
1
-
-
... More
Fuel Pump
1
-
-
... More
Diffuser Plate 132mm dia
1
-
-
... More
Nozzle 6.5 GPH, 45 Degree
2
-
-
... More
Diesel line Y strainer 25mm dia
2
-
-
... More
Diesel line globe Valve 25mm dia
2
-
-
... More
Steam line Y strainer 25mm Dia
2
-
-
... More
Steam line Globe valve 25mm Dia
2
-
-
... More
Steam line Y strainer 40mm Dia
1
-
-
... More
Supply & Fixing in Replacement of following spares suitable to Washing machine 100Kg including taking down old unserviceable spare parts complete all as specified and directed for Make of washing machines: Supershine & Megha laundry
-
-
-
... More
Digital temperature meter
3
-
-
... More
Timer
3
-
-
... More
Contactors ML 1, 3 Phase, 415 Volts
4
-
-
... More
Contactors ML 2, 3 Phase, 415 Volts
4
-
-
... More
Contactor relay M L 1, 3 phase, 415 volts
5
-
-
... More
Revenger (Reverse Forward)
3
-
-
... More
Water Level Indicator
3
-
-
... More
Steam solenoid valve
3
-
-
... More
Drain valve actuator
3
-
-
... More
Main motor V-belt
9
-
-
... More
Aux motor V-belt
9
-
-
... More
Washing Machine main bearing
3
-
-
... More
Reduction gear bearing
2
-
-
... More
Indicator
3
-
-
... More
Water inlet solenoid valve suitable for 100 kg washing machine
3
-
-
... More
Water outlet solenoid valve suitable for 100 kg washing machine
3
-
-
... More
Gland rope
30
-
-
... More
Door Lock Knobs
3
-
-
... More
Steam Valve (Globe)
3
-
-
... More
Main motor bearings
3
-
-
... More
Aux motor bearings
3
-
-
... More
Toggle switch
3
-
-
... More
Supply & Fixing following spare parts suitable to Air Compressor of capacity 5HP including taking down old unserviceable spare parts complete all as specified and directed.
-
-
-
... More
Limit switch
1
-
-
... More
Motor bearings
2
-
-
... More
Compressor Bearings
2
-
-
... More
Piston Kit
1
-
-
... More
Oil (20 W 40)
2
-
-
... More
Supply only following items all as specified and directed.
-
-
-
... More
Wax (Candle Powder)
10
-
-
... More
Grease (Castrol Make)
10
-
-
... More
Chemical salt
1800
-
-
... More
PPM Testing Liquid Set
3
-
-
... More
Laundrex softener chemical
60
-
-
... More
Laundrex Det
55
-
-
... More
Laundrex boost
55
-
-
... More
Laundrex neutral
55
-
-
... More
Meghana Liquid Bleach
55
-
-
... More
Supply & Fixing spare parts suitable to calender Machines including taking down old unserviceable spare parts complete all as specified and directed for Make of calender machines: Supershine & Megha laundry Eqpts
-
-
-
... More
Variable frequency drive
2
-
-
... More
Padding cloth
10
-
-
... More
Blower Motor Rewinding
2
-
-
... More
Temperature Meter
2
-
-
... More
Speed Regulator
2
-
-
... More
Push buttons (Red, Green, Blue)
2
-
-
... More
NO-Element
4
-
-
... More
NC-Element
4
-
-
... More
Toggle Switch
4
-
-
... More
Steam Solenoid Coil 15 mm
2
-
-
... More
FLR Unit
2
-
-
... More
Steam inlet Braided hose pipe 1" x 2 ft
2
-
-
... More
Pneumatic cylinders servicing only except spares
2
-
-
... More
Wax for cleaning chest
20
-
-
... More
Guide Ribbons
22
-
-
... More
Painting for feeding plate
2
-
-
... More
Grease for chain and gear wheel teeth
4
-
-
... More
Steam trap servicing
2
-
-
... More
Air line and steam line with all connectors
2
-
-
... More
Lubrication oil and gear oil
4
-
-
... More
Steam line Y strainer 25mm dia
1
-
-
... More
Disconnecting of Motor from washing machine/ Hydro extractor/ Drying tumbler/flat bed press machine/boiler/any other equipment in laundry plant etc and material and labour for re-winding of electric motor with super enamelled copper wire of good quality with same gauge and same size complete with all accessories including varnishing the winding for improvement of insulation by heating method and reassembling, installing, commissioning and testing after repair / rewinding, greasing and gland packing & necessary balancing arrangement with rubber bushes complete including transportation charges from site to work shop and back to its original position complete all as specified and directed for the following capacities:-
-
-
-
... More
up to 2 Hp
5
-
-
... More
above 2 HP to 5Hp
8
-
-
... More
above 5Hp to 10Hp
6
-
-
... More
M&L in Replacement of descaling of the following laundry equipment's with approved descaling chemicals complete all as specified and directed.
-
-
-
... More
Washing machine of 100 Kg capacity
3
-
-
... More
Washing machine of 50 Kg capacity
3
-
-
... More
600 Kg/hr boiler
3
-
-
... More
Supply & Fixing in Replacement of following spare parts suitable to Hydro Extractor of capacity 50Kg including taking down old unserviceable spare parts complete all as specified and directed for Make Hydro extractor :Megha laundry Eqpts
-
-
-
... More
Contactor M L 1, 3 phase, 415 volts
2
-
-
... More
Timer relay
3
-
-
... More
Transformer
3
-
-
... More
Timer
3
-
-
... More
Buffer
3
-
-
... More
Limit switch
3
-
-
... More
Main motor bearings
3
-
-
... More
Push button
4
-
-
... More
Motor to body springs
4
-
-
... More
Rubber bush for Hydro Extractor
3
-
-
... More
Hydro Extractor motor bearings
3
-
-
... More
Bridge rectifier
3
-
-
... More
Diode
3
-
-
... More
Body Spring support Bolts
3
-
-
... More
Bush
3
-
-
... More
Supply & Fixing in Replacement of following spare parts suitable to Air Compressor suitable for capacity up to 2HP including taking down old unserviceable spare parts complete all as specified and directed
-
-
-
... More
Limit switch
1
-
-
... More
Motor bearings
2
-
-
... More
Compressor Bearings
2
-
-
... More
Piston Kit
1
-
-
... More
Oil (20 W 40)
1
-
-
... More
Drain out the fuel from the fuel tank of Boiler of capacity up to 1000ltrs and keeping it in separate container safely, disconnecting all the fuel lines and other mechanical connections and taking out the fuel tank for cleaning, internally and externally by removing all the accumulated dirt/ sediment, leak testing the tank and welding/ brazing including one coat of synthetic enamel paint, refixing the tank in its original position, replacing the drain plug and PVC pipe, calibrating the fuel tank, refilling the drained out fuel back into the tank and marking of liters in gauge and provision of locking arrangements complete all as directed by Engr-in-charge.
3
-
-
... More
S&F in Replacement of MS Pipe line laid in trenches/duct/ug/surface/wall/floor alongwith aluminium Cladding insulation including following accessories complete all as directed by Engr-In-Charge at the Laundry Plant at Military Hospital
-
-
-
... More
2 1/2" MS C Class Pipe
25
-
-
... More
2 1/2" MS T/E Flanges
10
-
-
... More
2 1/2" MS Long Bends
10
-
-
... More
25mm C Class Pipe
30
-
-
... More
25mm T/E MS Flange
8
-
-
... More
1"x 6" MS long Bends
8
-
-
... More
1"x 6" MS Nipples
23
-
-
... More
1" Elbow
10
-
-
... More
1" Tee
8
-
-
... More
1" Steam Traps
8
-
-
... More
1" MS Union
10
-
-
... More
1" Axe Nipples
12
-
-
... More
Bolts and Nuts suitable to existing Pipes at Laundry plant , MH
15
-
-
... More
1/2" Teflon tapes
15
-
-
... More
1" globe valves
10
-
-
... More
Welding Rods
25
-
-
... More
Metallic Sheet
15
-
-
... More
Cutting Wheels
10
-
-
... More
M&L in Replacement for door bedding for 50/100kg washing machines/drying tumblers located MH laundry plant including taking down old unserviceable one complete all as directed by Engr-in-Charge.
5
-
-
... More
Supply, lay, connect test and commissioning in Replacement of solid copper conductor cable XLPE insulated screened PVC tape inner sheathed, unarmoured electric power cable heavy duty with aluminium conductor 1100 volts grade cross sectional area of 16 Sqmm single Core confirming to IS:7098 Part-I laid in trenches/floors complete testing and commissioning complete all as directed.
100
-
-
... More
All as per Item No. 15.00 above but for 25Sqmm single core all as directed by Engineer-in-Charge
50
-
-
... More
All as per Item No. 15.00 above but for 50Sqmm single core all as directed by Engineer-in-Charge
50
-
-
... More
Supply and Lay Galvanised in Replacement of medium grade, ISI Marked as per IS-1239 part - I galvanized, with all fittings such as bends, tees, elbows, reducers, unions, plugs, sockets etc., laid in trenches complete all as specified and as directed of following bores : -
-
-
-
... More
25mm dia bore
80
-
-
... More
40mm dia bore
100
-
-
... More
50mm dia bore
150
-
-
... More
Supply and fixing Gun-metal glove in Replacement or gate valve with iron wheel head, screwed both ends for iron pipe and fixed of Following sizes:
-
-
-
... More
25mm dia bore
3
-
-
... More
40mm dia bore
3
-
-
... More
50mm dia bore
2
-
-
... More
S&F in Replacement of 2000 Ltrs capacity rotational mountain polythene water storage water tank triple layered as per IS-1270 - 1989 hoisted 2500 dia ball valve brass with polyethene float and fly nut and fixed in position including suitable inlet & outlet pipe line connections & necessary platform complete including removing existing unserviceable tank complete all as directed.
Make: Sintex / Polycon
3
-
-
... More
Excavation in trenches in hard/dense soil not exe-1.5 mtr deep and not exe 1.5 mtr wide and getting out complete all as specified.
182.66
-
-
... More
Returning filling in and including spreading, levelling, watering and well remaining in layer not exceeding 25 cm complete all as specified
121.43
-
-
... More
Removal of surplus soil to a distance not exceeding 50 mtr and depositing under directed at a level not exce1.5 mtr above the starting point all as specified
61.23
-
-
... More
S&F in replacement of scroll compressor EMERSON make , model ZP104KCE - TFD - 522, 8.5 TR including refilling of refrigerant gas R-410A and leak testing complete as directed by Engr in charge.
3
-
-
... More
S &F in replacement of isolator 40 Amps 4 pole
4
-
-
... More
S &F in replacement of isolator 63 Amps 4 pole
8
-
-
... More
Supplying, laying and testing in Replacement of mild steel tubes 50 mm bore , ISI marked (IS-1239) (ISI marked) heavy grade with all fittings and fixtures laid in floors or fixed to wall, ceiling etc including necessary welding works including taking down old one complete all as specified .
20
-
-
... More
Supply & fixing CI butterfly valve, flanged type, confirming to IS 13095 suitable for 50 mm bore pipe complete all as specified.
2
-
-
... More
Supply & fixing of CI butterfly valve flanged type, confirming to IS 13095 suitable for 65 mm bore pipe complete all as specified.
2
-
-
... More
Supply & fixing of CI butterfly valve flanged type, confirming to IS 13095 suitable for 80 mm bore pipe complete all as specified.
2
-
-
... More
Supply & fixing of CI butterfly valve, flanged type, confirming to IS 13095 suitable for 100 mm bore pipe complete all as specified.
1
-
-
... More
Supply and replace column / suction pipe of sewage pumps including necessary fittings of dIa 80 mm complete all as directed
9
-
-
... More
S&F in Replacement MCCB 4 Pole, 415 V, Adjustable type, 160 Amps with breaking capacity 36 KA
2
-
-
... More
S&F in Replacement MCCB 4 Pole, 415 V, Adjustable type, 200 Amps with breaking capacity 36 KA
2
-
-
... More
S&F in Replacement MCCB 4 Pole, 415 V, Adjustable type, 250 Amps with breaking capacity 36 KA
1
-
-
... More
M&L for attending, repair and rectification of Boiler complaints alongwith necessary T&P, safety devices as per site requirement for the following type of complaints complete all as specified and directed:-
15
-
-
... More
M&L for attending, repair and rectification of Washing Machine complaints alongwith necessary T&P, safety devices as per site requirement for the following type of complaints complete all as specified and directed:-
16
-
-
... More
M&L for attending, repair and arresting of steam in pipe line complaints alongwith necessary T&P, safety devices as per site requirement for the following type of complaints complete all as specified and directed:-
16
-
-
... More
S&F in Replacement Advance Maintenance Free G.I. SAFE EARTHING Electrode with PIPE of not less than 50 mm outer dia) and two meter length, The electrode should be of galvanised (80 -100 micron) along with earth lead as Galvanised steel strip of size 32 X6 mm 7.5 m . The GI Electrode shall be pre-filled with Crystalline Conductive Material (CCM) . The GI electrode shall be surrounded with 25 kg Backfill compound to provide maximum contact between the electrode and Back Fill Compound. The earthing pit cover should be factory built ( size TOP- 10 Inch, Bottom -13 Inch, Height 10.25 Inch ) made of heavy duty Polypropylene complete all as specified and directed make ASHLOK / INDELEC/JMV /TERCEL/TRUE POWER
13
-
-
... More
M&L PCC 1:2:4 type B1 using 20 mm graded stone aggregate for motor plinth complete all as directed
0.66
-
-
... More
Supply and replace Trolley wheel made of Teflon with bush of wheel size 6 inch an base 4 inch complete all as specified and directed
10
-
-
... More
M&L chimney repair complete all as specified and directed by Engineer-in-charge
1
-
-
... More
supply and fix in Replacement of fully automatic star delta starter without sheet metal enclosure, panel mounting type with timer, relay and contractor incl push button 2 no's for panel door mounting, of suitable rating for use at 25 HP Pump set connecting, testing complete all as directed at site.
Make : BCH/ C& S/ L& T
1
-
-
... More
Disconnecting, transporting, dismantling the induction motor of capacity 1 HP for the following repairs and reassembling the same after repairs incl transporting and re-installation at site duly connected electrically and water supply inlet and outlet connections all as specified and directed.
Note : The cost of the items replaced will be paid separately under respective items of Sch 'A'
1
-
-
... More
Dismantling the Hydro Extractor 25 Kg induction motor of capacity 5.0 HP for the following repairs and reassembling the same after repairs, re-installation at site duly connection electrically and water in and outlet connections all as specified and directed.
Note : Note : The cost of the items replaced will be paid separately under respective items of Sch 'A'
1
-
-
... More
Rewinding the motor capacity 5.0 HP complete with appropriate gauge of supper enamelled copper wire as per existing gauge and turns with insulating materials of best quality including varnishing (insulation) and all as directed.
1
-
-
... More
Dismantling the Hydro Extractor 50 Kg induction motor of capacity 7.5 HP for the following repairs and reassembling the same after repairs, re-installation at site duly connection electrically and water in and outlet connections all as specified and directed.
1
-
-
... More
Rewinding the motor capacity 7.5 HP complete with appropriate gauge of supper enamelled copper wire as per existing gauge and turns with insulating materials of best quality including varnishing (insulation) and all as directed.
1
-
-
... More
Dismantling the washing Machine 100 Kg induction motor of capacity 10.5 HP for the following repairs and reassembling the same after repairs, re-installation at site duly connection electrically and water in and outlet connections all as specified and directed.
1
-
-
... More
Rewinding the motor capacity 10.5 HP complete with appropriate gauge of supper enamelled copper wire as per existing gauge and turns with insulating materials of best quality including varnishing (insulation) and all as directed.
1
-
-
... More
Dismantling the washing Machine 100 Kg induction motor of capacity 3.0 HP for the following repairs and reassembling the same after repairs, re-installation at site duly connection electrically and water in and outlet connections all as specified and directed.
1
-
-
... More
Rewinding the motor capacity 3.0 HP complete with appropriate gauge of supper enamelled copper wire as per existing gauge and turns with insulating materials of best quality including varnishing (insulation) and all as directed.
1
-
-
... More
S&F spare in Replacement of parts suitable to RO Plants of capacity 500 LPH-02 Nos including taking down old unserviceable spare parts complete all as specified and directed
-
-
-
... More
Filter for RO Plant 500 LPH
130
-
-
... More
Carbon Sand
600
-
-
... More
Sand
800
-
-
... More
40x40 Membrane
5
-
-
... More
Flow meter
10
-
-
... More
Pressure gauge
5
-
-
... More
PTMT Ball Valve
5
-
-
... More
Pump NRV of suitable size
5
-
-
... More
UV System
5
-
-
... More
PVC Pipe
40
-
-
... More
Disconnection RAW water feed pump 0.5HP and re-winding, including replacement of unserviceable bearings of suitable size and re-assembling the motor including installation complete all as specified and directed.
5
-
-
... More
Disconnecting High pressure pump 500 LPH and re-winding, including replacement of unserviceable bearings of suitable size and re-assembling the motor including installation complete all as specified and directed.
5
-
-
... More
S&F in Replacement of Membrane housing for 40x40 RO membranes.
5
-
-
... More
M&L for attending, repair and rectification of external LT electric supply complaints on up to 1100 Volts grade, over head/underground system alongwith necessary T&P, safety devices as per site requirement for the following type of complaints complete all as specified and directed:-
-
-
-
... More
Replacement of worn out jumpers, jointing and tightening with new ACSR conductor.
Note:- Single phase/two wire or 3 phase/4 wire system will be considered as one job for payment purpose.
10
-
-
... More
Disconnecting from over head conductor, cutting worn out portion of LT cables of any type and size, carry out repairs including taking out cables from under ground loop line and rejoining the same to restore electric supply.
Note :- (i) LT Jointing Kits, Cable protection Pipe if required at site will be measured and paid separately.
(ii) Quoted rate is deemed to be inclusive of cutting and removing the pole coping and inserting the cable alongwith protection pipes.
Notes for Item Nos 57.01 to 57.03 :-
(a) The contractor will be allotted complaints at MES complaint cell on daily basis on all working days and sufficient resources will be deployed by him/her for completion of day to day complaint within 24 Hrs from the time of reporting. Any delay beyond above mentioned time limit without intimation of sufficient cause, penalties will be recovered twice of the quoted rate for each un-attended complaint.
10
-
-
... More
(b) A detailed log of complaints with completion/non-completion remarks from users/MES will be maintained by the contractor and the same will be updated on daily basis in consultation with Engr-in-Charge or JE E&M as detailed.
(c) The contractor will make suitable arrangement for emergency complaints and will notify auth rep/Engr-in-Charge about extraordinary circumstances for probable non-completion or delay in rectification of complaints beyond stated time limit set for disposal of complaint. In case of any dispute the decision of accepting officer will be final and binding in this regard.
(d) The contractor will intimate MES authority well in advance if electric shutdown is required during rectification of complaints.
(e) The quoted rate is deemed to be inclusive of transportation and other expenses required for the resource deployment at the complaint site around scattered Military station at Secunderabad.
(f) The contractor will maintain location wise record of each spare utilized as per inventory format given by AGE E/M, Secunderabad and the same shall be submitted to E/M No II store on daily basis.
-
-
-
... More
S&F in replacement Stay assembly comprising of 7/10 SWG galvanised MS stranded stay wire of required length, minimum tensile strength 70 Kg/mm (grade-2 quality) fixed to pole with and including FI clamps, bolts, nuts, washers, galvanised steel stay rod 16mm dia 180 cm long bow 400 x 14 mm nuts/bolts, washers, loop type insulator of size 65 x 90 mm vitreous, clearance dia of hole 16mm, stay plate of size 230 x 230 x 6 mm including necessary excavation and earth work PCC 1:3:6 type C-2 using 40 mm graded crushed stone aggregate in foundation and disposal of surplus soil, up to 50m including disconnecting/taking out old existing unsv stay assembly complete all as specified and directed.
1
-
-
... More
M/L in replacement of cross arms, bracing, supports clamps and back plates fabricated from structural steel section incl nuts, bolts washers, welding, bending cold or hot drilling holes for bolts in any shapes or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of paint including disconnecting/taking out old existing unsv cross arms complete all as specified and directed.
0.5
-
-
... More
Supply & Replace MCCB along with both side spreader link and nut bolts of appropriate size (Conforms to IEC:60947-II/IS:13947-II) in existing LT Panel box/Feeder Pillar boxes (KIOSK),in MCCB DBs of capacity 315-400 Amps, 4 Pole, 36KA, 415 Volt including disconnecting/taking out existing old unsv/burned MCCB complete all as specified and directed.
1
-
-
... More
All as per item No 60.00 here in before but of capacity 250 Amps, 4 pole, 36 KA
1
-
-
... More
All as per item No 60.00 here in before but of capacity 160 Amps, 4 pole, 16KA
2
-
-
... More
All as per item No 60.00 here in before but of capacity 125 Amps, 4 pole, 16 KA
2
-
-
... More
All as per item No 60.00 here in before but of capacity 100 Amps, 4 pole, 16 KA
1
-
-
... More
All as per item No 60.00 here in before but of capacity 63 Amps, 4 pole, 16 KA
1
-
-
... More
S&F MCB, SP 10-32 Amps, 'C' Curve with breaking capacity 6KA, including disconnecting/taking out existing old unsv/burned Isolator complete all as specified and directed.
2
-
-
... More
Supply and fixing in replacement of automatic street light switch using infrared sensor based nature switch for automatic switching of street lights. Nature switch operation should be based on natural light lux level. Required illuminance level for switching on is 30 Lux and for switching off 10 lux. The sensor should also have part night operation facility of min 4 hrs to max 12 hrs. The sensor along with suitable power contactors incoming outgoing MCBS SP and automanual (sensor bypass selection option should be enclosed in a pole /wall mountable enclosure made of rust proof electric shock proof termite proof and FR grade SMC Box conforming to IP54 single phase load of 8 KW with circuit wiring min 10 sq mm copper wire 63 Amps contactor and suitable MCBs at both positions at incoming and out goings of breaking capacity 10 KA complete including necessary clamp (2 sets) / anchor bolt(4 no's) for fixing on pole / wall complete all as directed including taking down old one . Model no Swadeep-02 EC 8KW 1P or equivalent from Havells/Legrand .
1
-
-
... More
S&F in replacement LED street light fitting 90 Watt 230 V AC outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete, lighting source and lens embedded PC cover having TOP OPENING separate driver compartment with IP66 protection and impact resistance of IK07 with 10 KV Built-in-Surge Protection Device, road way light fitting with high power LED as light source of capacity 90 watts with suitable drivers etc and connecting with 1.5 Sqmm copper conductor PVC insulated three core weather proof cable etc, fixing to wall/pole, complete all as specified and directed. Note : (i) Contractor has to produce LM-79/LM-80 certificate alongwith purchase vouchers.
(ii) External Surge protection of the drive should be 10 KV
5
-
-
... More
All as per item No 63.00 above but 100 watts.
4
-
-
... More
All as per item No 63.00 above but 120 watts.
5
-
-
... More
All as per item No 63.00 above but 150 watts.
4
-
-
... More
S&F in replacement LED flood light 100 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp die-cast aluminium IP66 flood light, suitable for highlighting architectural facade and general purpose lighting, with high power LED as light source of capacity 120 watts with suitable drivers etc and connecting with 4.0 Sqmm aluminium conductor PVC insulated twin core weather proof cable etc, fixing to wall/pole complete all as specified and directed. Note : (i) Contractor has to produce LM-79/LM-80 certificate alongwith purchase vouchers and Guarantee certificate from Manufacturer. (ii) External Surge protection of the driver should be 10 KV
5
-
-
... More
All as per item No 67.00 above but 120 watts.
2
-
-
... More
All as per item No 67.00 above but 150 watts.
2
-
-
... More
Supply, fixing, in replacement connecting and testing post top light fitting in spherical shape polycarbonate PMMA clear diffuser and IP65 protection, new generation energy saving and environmental friendly long life aesthetically designed aluminium decorative luminaires with high power LED as light source of capacity 1X35/40 watts, fixed to Pole/Wall in any position including taking down old existing street light fitting of any type and capacity complete all as specified and directed.
5
-
-
... More
S&F in replacement LED Driver suitable for up to 45 watts LED light fittings complete all as specified and directed.
4
-
-
... More
S&F in replacement LED Driver suitable for up to 60 watts LED light fittings complete all as specified and directed.
4
-
-
... More
S&F in replacement LED Driver suitable for up to 72 watts LED light fittings complete all as specified and directed.
5
-
-
... More
S&F in replacement LED Driver suitable for up to 90 watts LED light fittings complete all as specified and directed.
5
-
-
... More
S&F replace LED Driver suitable for 100 watts LED flood light fittings complete all as specified and directed.
5
-
-
... More
S&F replace LED Driver suitable for 150 watts LED flood light fittings complete all as specified and directed.
5
-
-
... More
Supply and fix in replacement locally available gate / garden light of best quality metal Silver / metal black Decorative Exterior of size not less than 300 mm X220 mm with and including LED bulb 9 watt suitable for outdoor installation and suitable for fixing in 40/50 mm dia GI pipe including necessary connections complete all as specified and directed including taking down old one .
4
-
-
... More
Material and labour for Taking down UNSV LED Lights and removing Carbon from its connector joints incl replacement of Connecting wire with new PVC sheathed weatherproof 3X single core cable for electrical connection and refixing the fitting after repair to its original/New location or as directed by Engr-in-charge.(connecting wire will be measured and paid separately only)
20
-
-
... More
Supply and fix in replacement Acrylic globe light best quality clear with and including LED bulb 9 watt of 200 mm dia complete suitable for fixing in 40/50 mm dia GI pipe including necessary connections complete all as specified and directed including taking down old one .
5
-
-
... More
Material and Labour in repairs of drawing two runs of PVC insulated unsheathed single core multi stranded copper conductor FRLS cable of size 1.50 sq mm with one run of PVC insulated unsheathed single core multi stranded copper conductor FRLS cable of size 1.50 sq mm including 20mm dia PVC conduit of dia 20 mm medium grade exclusive of boxes but inclusive of all tees, bends, elbow, reducers etc and fixing accessories such as couples, lock nuts, saddles, pipe hooks, clamps etc complete all as specified
100
-
-
... More
S& F in replacement LED bulb 5 Watt suitable for B-22 base holder complete all as specified and directed.
20
-
-
... More
Supply and lay in replacement in trenches/fixed to walls/poles etc connecting buy using lugs, testing and commissioning XLPE insulated and PVC sheathed heavy duty LT 1100 Volts grade armoured under ground cable with stranded aluminium conductor 4 Core 10 Sqmm complete all, as specified and directed
Note :- Earth work excavation, sand cushioning and brick protection shall be measured and paid separately.
100
-
-
... More
All as per item No 82.00 above but 4 Core 16 Sqmm
100
-
-
... More
All as per item No 82.00 above but 3.5 Core 35 Sqmm
100
-
-
... More
All as per item No 82.00 above but 3.5 Core 70 Sqmm
100
-
-
... More
All as per item No 82.00 above but 3.5 Core 95 Sqmm
100
-
-
... More
All as per item No 82.00 above but 3.5 Core 150 Sqmm
100
-
-
... More
All as per item No 82.00 above but 3.5 Core 185 Sqmm
30
-
-
... More
Taking out and Relaying of LT cable of size 10 sq mm to 50 Sqmm 2/3.5 core after carrying out necessary Repair such as joining with Epoxy joint and laid with sand Cushioning and brick protection and making connection By using Lugs all as specified and directed by Engr in charge. Note: ( Earth work , sand Cushioning, brick protection, Lt Joints shall be measured and paid separately under Relevant Item)
50
-
-
... More
Taking out and Relaying of LT cable of size 70 sq mm to 150 Sqmm 3.5 core after carrying out necessary Repair such as joining with Epoxy joint and laid with sand Cushioning and brick protection and making connection By using Lugs all as specified and directed by Engr in charge. Note: ( Earth work , sand Cushioning, brick protection, Lt Joints shall be measured and paid separately under Relevant Item)
50
-
-
... More
Taking out and Relaying of LT cable of size 185 sq mm to 300 Sqmm 3.5 core after carrying out necessary Repair such as joining with Epoxy joint and laid with sand Cushioning and brick protection and making connection By using Lugs all as specified and directed by Engr in charge. Note: ( Earth work , sand Cushioning, brick protection, Lt Joints shall be measured and paid separately under Relevant Item)
50
-
-
... More
Supplying, erecting and fixing in replacement steel tubular swaged poles with cast iron base plate of size 300mm x 300mm x 6mm, finial taper plug, bolts, nuts & screws for type 410 SP-31 (9.0 mtrs long) including painting with two coats of aluminium paint over one coat of red oxide primer on all exposed surfaces and tarring with black bituminous paints to embedded portion in PCC and providing 3 Nos of 30cm wide circular bands with black & yellow paint starting from plinth level at a gap of 30 cm in between 2 bands and numbering of poles, in yellow paint over black painted back ground at a height of 2m from bottom of pole with 5 cm large bold letters 2" (inch) wide including taking down old unserviceable PCC poles of any type complete all as specified and directed.
Note: Excavation, earth work, PCC in foundation and coping shall be measured and paid separately under relevant item of this schedule.
2
-
-
... More
Restreching/Restringing, tightening and repair to overhead line ACSR conductor of any size on LT poles including necessary Aluminium binding wire connectors PVC sleeves for jumper, fixing of insulators and pruning of tree complete all as specified and directed. Notes: (i) The distance between pole to pole in one span (contains 2/4/6 runs) i.e. one span will only be considered for payment purpose. (ii) No Extra conductor will be measured for binding to insulators / jumpering etc.
50
-
-
... More
Excavation in trenches,exc 1.5 mtr but not exc 3 mtr. depth, for foundation of PCC/Steel pole, laying of cable in trenches etc and getting out in Hard / Dense soil complete all as specified and directed.
0.16
-
-
... More
Spreading riddled earth ( after preparation of excavated earth) in Cable duct with sand cushioning of cable laid in trenches complete all as directed by Engineer-in-Charge Note:- Punned thickness 18 CM( 6.25 Cm below cale and 11.75 cm above cable) will be measured for payment purpose. Quoted rate inclusive of all arrangement as mentioned.
37.84
-
-
... More
Supply and Laying bricks, common burnt clay building bricks, sub class 'B' of size 230 x 115 x 75 mm laid across in trenches for cable protection complete all as specified and directed.
4.06
-
-
... More
M&L PCC 1:4:8 type D2 using 40 mm graded stone aggregate for filling & foundation of pole & mass complete all as directed
0.16
-
-
... More
M&L PCC 1:3:6 type C2 using 40 mm graded stone aggregate for filling & foundation of pole & stay complete all as directed
0.99
-
-
... More
Cutting the existing road/PCC surface straight by manual, depth and width not less than 1 mtr below ground level for passing of underground cable and filling back with excavated soil up to 75% road portion and 25% shall be made with cement concrete 1:2:4 (using 20 mm graded aggregate stone complete all as specified and directed.
12
-
-
... More
M&L for replacement of broken earth pit made out of PCC 1:2:4 type B1 using 20 mm graded crushed stone aggregate, 20 mm thick and earth pit cover made out of RCC 1:2:4 type B1, cover reinforced with 8 mm dia MS deformed bars @ 100 mm centre to centre both ways with hook made out of 8 mm dia bar, watering arrangement with funnel and wire mesh and including reconnecting of earth lead of any type with new nuts, bolts and washers etc as required at site complete all as specified and directed.
2
-
-
... More
M&L for painting the existing LT steel poles of 9.0 Mtr long including cross arms, clamps, street light junction boxes etc with 1 coats of aluminium paint including thoroughly cleaning the existing surface, writing of pole numbers in yellow circle 15 cm with black paint on poles. Painting the poles up to 1.5 Mtr height with alternate bands 30 cm height (3 Nos black and 2 Nos Yellow) from ground level, complete all as specified and directed.
20
-
-
... More
M&L for Painting the existing LT PCC poles with 1 coats of synthetic enamel base paint including painting of cross arms, clamps, etc with one coat of aluminium paint and providing alternative band of 30 cm width (3 black and 2 yellow) from bottom of pole to 1.5 metres height , writing of pole numbers in yellow circle15 cm with black paint on poles complete all as specified and directed.
15
-
-
... More
Trimming/pruning and removing of tree branches or any other foreign objects from HT/LT over head conductor and clearing the OH Line of any type and size for one span of any length in 2 way /4 way/6 way conductor system. Notes: (i) Insulators of any type, connectors and ACSR conductor of any size required at site will be measured and paid separately under relevant item of this schedule. (ii) The contractor is responsible for provision of Necessary T & P and safety equipment's to complete the job.
50
-
-
... More
Cutting unaxious green growth and grass by manual labour or by machine at all 11 KV Electric Installation premisses/around 2/4 Pole structure/along the boundary fencing and removing rubbish from the site of work complete all as specified and directed.
2000
-
-
... More
Supply and fixing in replacement steel light bracket made out of 40 mm bore mild steel GI light grade tubing over all length 1.5 mtr bend to shape as directed including providing two Nos MS flat iron 40x6 mm clamp of appropriate size with nut bolts and washer duly painted with two coat of synthetic enamel paint over a coat of primer (GI surface shall not be painted) complete all as specified.
10
-
-
... More
S&F in replacement PVC insulated unsheathed/sheathed cable with stranded Aluminium conductor 1100 Volts grade, flat twin core service cable of size 4 Sqmm conforming to IS:694/1990 with latest amendments ISI including disconnecting/taking out existing unsv/damaged old service cable complete all as specified and directed. Make : Richa/havells or equivalent.
300
-
-
... More
All as per item No 106.00 above but of size 6 Sqmm complete all as specified and directed.
300
-
-
... More
All as per item No 106.00 above but of size 10 Sqmm complete all as specified and directed.
500
-
-
... More
S&F in replacement hot press moulded SMC junction/terminal box of size with internal dimensions of 200 x 140 x 95 mm with hinged door, incl provision of 2 way connector 415 Volts made out of polycarbonate or Bakelite and 1 No MCB of 6 Amps with DIN bar, drilling holes for cable connections, connecting incoming and or out going cables by providing suitable of size of cable lugs/glands, fixed on pole by means of clamps made out of MS flat iron of size 25mm x 3 mm 2 Set including dismantling of old unserviceable all as specified and as directed.
20
-
-
... More
Supply and laying in replacement GI tubing light grade of size 40 mm for cable protection on road/drain/floor/pole including necessary clamps 40x4mm.
12
-
-
... More
Supply and laying in replacement GI tubing light grade of size 50 mm for cable protection on road/drain/floor/pole including necessary clamps 40x4mm.
6
-
-
... More
Supply in replacement of aluminium cable lugs of following sizes :-
-
-
-
... More
16 to 25 Sqmm Size
10
-
-
... More
35 to 50 Sqmm Size
10
-
-
... More
70 to 95 Sqmm Size
10
-
-
... More
120 to 150 Sqmm Size
10
-
-
... More
Supply and fixing in replacement lantern of dia 60 CM for fixing of flood light, cap type to be fixed on the top of 9 m SP-31 Steel pole , made of MS pip medium grade dia greater than the top dia of the pole of length 0.35 M supported by MS flat iron of size 50X6 mm 8 no's including two coat of aluminium painting over a coat of red oxide primer complete all as directed
1
-
-
... More
Supply and fix in replacement on wall with necessary arrangements busbar chamber, factory made 100 amps 4 way 4 pole wall mounted IP -54 , made out of 1.6 mm thick CRCA sheet epoxy powder coated single layer operational voltage 440 Volt , Short circuit current capacity 25 KA for 1 Second including necessary cable connections complete all as specified and directed.
Note: Quoted rates inclusive of necessary fixing arrangement and cable connections , cable glands as required for proper fixing / functioning of Bus Bar Chamber.
1
-
-
... More
M&L for Maintenance of DG set and carrying out ‘B’ check and replacement of ‘B’ check kit filters such as Oil filter, by pass filter, fuel filter,CR element and CR plates complete with ‘O’ rings and draining of Engine oil and topping up with the new engine oil complete testing all as specified and directed by the Engr-in-Charge for the following capacity DG sets:- Note :- (i) Engine oil shall be measured and paid separately
(ii) Labour & transportation shall be arranged by contractor, quoted rate deemed to be inclusive in the unit rate.
Make: KIRLOSKER/ CUMMINS /GREAVES/ GREAVES COTTON/ASIATIC/ RUSTON
(a) up to 18 KVA DG Set
2
-
-
... More
(b) above 18 KVA and up to 30kVA DG Set
2
-
-
... More
(c) above 40 KVA and up to 63 KVA DG Set
2
-
-
... More
(e) 125 KVA DG Set
2
-
-
... More
M&L for Renewal/ repairs of unserviceable automatic voltage regulator (AVR) up to 125 KVA DG set including all spares, testing all as specified and directed by Engr-in-Charge. Make:- As per OEM approved make.
2
-
-
... More
M&L for Renewal/ repairs of unserviceable automatic voltage regulator (AVR) above 125KVA and up to 320 KVA DG set including all spares, testing all as specified and directed by Engr-in-Charge. Make:- As per OEM approved make.
2
-
-
... More
M&L for Dismantling of exhaust pipe of the DG set by unscrewing nuts and bolts and taking down the pipe with muffler removing the burnt out asbestos rope and well wrapping with new aluminium metal cladding with glass wool including cleaning the silencer, and fixing the same in its original position complete all as directed by Engr- in- Charge for the following capacity DG Sets.
(a) up to 30KVA
2
-
-
... More
(b) 40KVA to 182.5 KVA DG set.
2
-
-
... More
M&L for Disconnecting all electrical connections from the unserviceable self starter of any make/ capacity model 24 volts and taking down the self starter and transporting to civil workshop for carrying out repairs, complete overhauling the system including replacing the unserviceable parts like bearings, carbon brushes, clutch plates etc & assembling including after repair refixing the self starter in its original position, making all connection as per DG Set OEM recommendation, testing and commissioning complete all as directed by Engr-in-charge. Note:- Supply only Armature coil, field coil shall be measured and paid separately under relevant items of this Schedule.
1
-
-
... More
Supply only Armature coil for self starter of any make, any capacity and any model 24 Volts including testing complete all as directed by Engr-in-charge
2
-
-
... More
Rewinding of field coil for self starter of 24 volts with fine enamelled copper conductor of same gauge with 'F' class insulation, size twins and weight with necessary insulating materials, gauge of conductor suitable any make, any capacity and any model complete all as directed by Engr-in-charge.
2
-
-
... More
M&L for Disconnecting all electrical connections from the unserviceable self starter of any make/ capacity model 12 volts and taking down the self starter and transporting to civil workshop for carrying out repairs, complete overhauling the system including replacing the unserviceable parts like bearings, carbon brushes, clutch plates etc & assembling including after repair refixing the self starter in its original position, making all connection as per DG Set OEM recommendation, testing and commissioning complete all as directed by Engr-in-charge. Note:- Supply only Armature coil, field coil shall be measured and paid separately under relevant items of this Schedule.
2
-
-
... More
Supply only Armature coil for self starter of any make, any capacity and any model 12 Volts, 180/200 AH complete all as directed by Engr-in-charge
2
-
-
... More
Rewinding of field coil for self starter of 12 volts with fine enamelled copper conductor of same gauge with 'F' class insulation, size twins and weight with necessary insulating materials, gauge of conductor suitable any make, any capacity and any model complete all as directed by Engr-in-charge.
2
-
-
... More
M&L for Disconnecting the oil cooler of capacity up to 100 KVA DG set of any make/ model from the existing locations duly removing of all mechanical connections and taking down the same for complete servicing opening the parts and cleaning thoroughly by using suitable cleaning material and acid and reassembling and refixing in its original position, testing and commissioning complete all as directed by Engr-in-charge
2
-
-
... More
M&L for Disconnecting the oil cooler of capacity above 100kVA to 250KVA DG set of any make/ model from the existing locations duly removing of all mechanical connections and taking down the same for complete servicing opening the parts and cleaning thoroughly by using suitable cleaning material and acid and reassembling and refixing in its original position, testing and commissioning complete all as directed by Engr-in-charge
2
-
-
... More
M&L for Renewal/ replacement of existing unserviceable air cleaning element inner and outer with necessary ‘O’ rings for the DG sets of following capacities as that of existing make and model complete all as directed by Engr-in-charge: - Make for item No.10 to 10.02:OEM recommended
(a) Up to 100 KVA DG Set
2
-
-
... More
(b) above 100 KVA and up to 182.5 KVA DG Set
2
-
-
... More
M&L for Disconnecting all the incoming and outgoing rubber hoses and draining out the water from the choked radiator assembly of the existing make and model and various capacities of DG sets and taking down the radiator assembly by unscrewing all mechanical/electrical connections from the existing mounting, transporting the same to civil workshop for carrying out servicing, opening the top and bottom covers of radiator assembly cleaning thoroughly the chocked pipe of the radiator by using chemical detergent, lime caustic soda, cotton etc., cleaning of all the deposited sediments in the pipes/tubes including arresting of leakage by means of soldering, brazing and transporting back to site and refixing the same in its original position with suitable size nuts, bolts and washers and Anti vibrating mounting(AVM) pads as required as per OEM recommendation etc., for the following DG sets all as specified and directed by Engr-in-Charge: (a) Up to 100 KVA DG Set
2
-
-
... More
(b) above 100 KVA and up to 182.5 KVA DG Set
2
-
-
... More
M&L for Renewal of battery cable leads of copper conductor and with brass lugs terminal, for the 12V, 150/180 /200 AH batteries to self stater as that of existing size and length complete all as directed by Engr-in-charge
4
-
-
... More
S&F Automatic cut off type Battery Charger suitable for 12 V, up to 10 Amp Battery complete all as directed by Engr-in-charge. Make SMPS/ Phonix
2
-
-
... More
S&F Automatic cut off type Battery Charger suitable for 24 V, up to 10 Amp Battery complete all as directed by Engr-in-charge. Make SMPS/ Phonix
2
-
-
... More
M&L for Renewal/replacement of 'V' belts for the following capacity DG sets as per existing size and model complete all as directed by Engr-in-charge. Make :- FENNER/ DUNLOP
(a) Up to 100 KVA DG Set
2
-
-
... More
(b) above 100 KVA and up to 182.5 KVA DG Set
1
-
-
... More
M&L for Renewal/replacement of fan belts for the following capacity DG sets as per existing size and model complete all as directed by Engr-in-charge. Make :- As per OEM Recommendation
(a) Up to 100 KVA DG Set
3
-
-
... More
(b) above 100 KVA and up to 182.5 KVA DG Set
2
-
-
... More
M&L for Renewal/replacement of Dynamo belts for the following capacity DG sets as per existing size and model complete all as directed by Engr-in-charge. Make :- As per OEM Recommendation
(a) Up to 100 KVA DG Set
2
-
-
... More
(b) above 100 KVA and up to 182.5 KVA DG Set
2
-
-
... More
M&L disconnecting & removing the unserviceable DC wiring from DG set of any type/any make/any model/any capacity and rewiring with the same with suitable new copper wire to existing gauge wire by providing flexible pipe including making all electrical connections as per OEM recommendation for satisfactory completion of job & checking of electrical/electronic spares working condition and testing etc complete all as specified and directed.
Note: (i) The rate quoted deemed to be inclusive of new copper wire cost in the unit rate.
2
-
-
... More
M&L for replacement of existing unserviceable water temperature gauge with new water temperature gauge for the DG set of any description including making necessary electrical /mechanical connections and taking down old unserviceable one complete all as directed by Engr-in-charge. Make: OEM recommended make
2
-
-
... More
M&L for replacement of existing unserviceable lubricant oil temperature gauge with new lubricant oil temperature gauge for the DG set of any capacity including making necessary electrical /mechanical connections and taking down old unserviceable one complete all as directed by Engr-in-charge.
Make: OEM recommended make
2
-
-
... More
M&L for replacement of existing unserviceable oil pressure gauge with new oil pressure gauge for the DG SET of any capacity including making necessary electrical /mechanical connections and taking down old unserviceable one complete all as directed by Engr-in-charge.
Make: OEM recommended make
2
-
-
... More
M&L for replacement of unserviceable solenoid switch with new solenoid switch 12volts for DG set of any make and any capacity including making necessary electrical /mechanical connections and taking down old unserviceable one complete all as directed by Engr-in-charge. Make: OEM recommended
2
-
-
... More
M&L for replacement of unserviceable solenoid switch with new solenoid switch 24volts for DG set of any make and any capacity including making necessary electrical /mechanical connections and taking down old unserviceable one complete all as directed by Engr-in-charge. Make :- OEM recommended
2
-
-
... More
S&F in repairs the following spare parts for any type/make of DG sets, as and when required by the department complete all as specified and directed.
Make for item no 22 to 22.10:- OEM recommended
-
-
-
... More
Starting/Ignition - key/button
2
-
-
... More
Volt Meter 0-500V
2
-
-
... More
Amps Meter
2
-
-
... More
Frequency Meter
2
-
-
... More
S.D Valve assembly
2
-
-
... More
Oil safety control
2
-
-
... More
Water safety control
2
-
-
... More
Water separator bowl 3247715
2
-
-
... More
Hour Meter
2
-
-
... More
Radiator Metal Pipes
2
-
-
... More
Supply and filling the new engine oil 20W/40 for toping up up to the required level complete all as directed by Engr-in-charge Make :- CASTROL/ INDIAN OIL/ SERVO
100
-
-
... More
Supply and filling the new engine oil 15W/40 for toping up up to the required level complete all as directed by Engr-in-charge Make :- CASTROL/ INDIAN OIL/ SERVO
80
-
-
... More
S&F in replacement of Line Voltage Monitors (LVMS) of existing make to DG set of 100 KVA to 625 KVA capacity listed parameters including testing complete all as specified and as directed. Make :- OEM recommended
1
-
-
... More
S&F in replacement of Line Voltage Monitors (LVMS) of existing make to DG set capacity up to100 KVA capacity listed parameters including testing complete all as specified and as directed. Make :- OEM recommended
1
-
-
... More
Drain out the fuel from the fuel tank of DG set of capacity 500 Ltrs and above and keeping it in separate container safely, disconnecting all the fuel lines and other mechanical connections and taking out the fuel tank for cleaning, internally and externally by removing all the accumulated dirt/ sediment, leak testing the tank and welding/ brazing including one coat of synthetic enamel paint, refixing the tank in its original position, replacing the drain plug and PVC pipe, calibrating the fuel tank, refilling the drained out fuel back into the tank and marking of liters in gauge and provision of locking arrangements complete all as directed by Engr-in-charge.
2
-
-
... More
S&F in replacement of Rectifiers of existing Make to DG Set of 100 KVA to 250 KVA capacity with all listed parameters including testing complete all as specified and directed.
2
-
-
... More
S&F in replacement of Rectifiers of existing Make to DG Set capacity up to 100 to 125 KVA capacity with all listed parameters including testing complete all as specified and directed.
2
-
-
... More
M &L for Removing of defective engine oil control pressure switch supply & fix new engine oil control pressure switch suitable for up to 100KVA DG set complete all as directed by Engr-in-charge. Make as per OEM Recommendation.
2
-
-
... More
M&L for Removing of defective engine oil control pressure switch supply & fix new engine oil control pressure switch suitable for above 100 KVA to 250 KVA DG set complete all as directed by Engr-in-charge. Make as per OEM Recommendation.
2
-
-
... More
M&L disconnecting & removing the unserviceable AC wiring from AMF panel of DG set of any type/any make/any model/any capacity and rewiring with the same with suitable new copper wire to existing gauge wire by providing flexible pipe including making all electrical connections as per OEM recommendation for satisfactory completion of job & replacement of electrical/electronic spares and testing etc complete all as specified and directed.
Note: (i) The rate quoted deemed to be inclusive of new copper wire cost in the unit rate.
(ii) Electrical/Electronic spares shall be measured & paid separately under relevant items.
2
-
-
... More
Supply only following spare parts :-
(a) Push buttons.
2
-
-
... More
(b) AMF Panel Hooter
2
-
-
... More
(c) Earth fault relay. Make: OEM recommended
2
-
-
... More
(d) Over load relay. Make: OEM recommended
1
-
-
... More
(e) Over/Under voltage relay. Make: OEM recommended
1
-
-
... More
(f) Auxiliary relays 12v/6Amps Make: OEM recommended
1
-
-
... More
(g) Power Contactor 4 pole,02 NO +NC,400Amps,
1
-
-
... More
(h) Power Contactor 4 pole,02 NO +NC,250AmpsAmps.
1
-
-
... More
(i) Power Contactor 4 pole,02 NO +NC,200Amps.
2
-
-
... More
(j) Power Contactor 4 pole,02 NO +NC,160Amps.
1
-
-
... More
(l) Power Contactor 4 pole,02 NO +NC,100Amps.
1
-
-
... More
(m) Single phase preventer, make:minilec/GIC
2
-
-
... More
(n) Auxiliary Relays 24Volts / 6A Make: OEM recommended
2
-
-
... More
(o) PLC based AMF relay unit Make: OEM recommended
1
-
-
... More
(p) Low lube oil safety switch Make: OEM recommended
1
-
-
... More
(q) Booster Relay 24Volts / 10A Make: OEM recommended
2
-
-
... More
(r) Battery charger 24 V /10A panel mounting type Make: OEM recommended
1
-
-
... More
(s) Battery charger 12 V /10A panel mounting type Make: OEM recommended
1
-
-
... More
(t) Coolant temperature sensor Make: OEM recommended
1
-
-
... More
(u) Power contactor 4 pole, 02NO+02NC,63 Amps ,Make: L&T/Tc/ABB/SIEMENS/Schnieder/GE
1
-
-
... More
(v) contactor operating coil of Power contactor 4 pole, 02NO+02NC,400 Amps
1
-
-
... More
(w) contactor operating coil of Power Contactor 4 pole,02 NO +NC,250AmpsAmps
1
-
-
... More
(x) contactor operating coil of Power Contactor 4 pole,02 NO +NC,200Amps
1
-
-
... More
(y) contactor operating coil of Power Contactor 4 pole,02 NO +NC,160Amps
1
-
-
... More
(z) contactor operating coil of Power Contactor 4 pole,02 NO +NC,130Amps
1
-
-
... More
(aa) contactor operating coil of Power Contactor 4 pole,02 NO +NC,100Amps
1
-
-
... More
(ab) contactor operating coil of Power contactor 4 pole, 02NO+02NC,63 Amps
1
-
-
... More
M&L for Removing the defective charging dynamo of capacity 24 Volt DC any make, model, any capacity and opening it, by removing all nuts and bolts, cleaning with necessary cleaning agent and overhauling lubricating of the rewinding the damaged winding of field coils with super enamelled copper wire suitable to same existing size/gauge & reconnecting the same, refixing back, in original position including making all necessary electrical/mechanical connections testing and commissioning complete all as directed by Engr-in-charge.
1
-
-
... More
M&L for Removing the defective charging dynamo of capacity 12 Volt DC any make, model, any capacity and opening it, by removing all nuts and bolts, cleaning with necessary cleaning agent and overhauling lubricating of the rewinding the damaged winding of field coils with super enamelled copper wire suitable to same existing size/gauge & reconnecting the same, refixing back, in original position including making all necessary electrical/mechanical connections testing and commissioning complete all as directed by Engr-in-charge.
2
-
-
... More
M&L for replacement of unserviceable spares for water manifold and Radiator spares up to 63 KVA DG set for the following spares:-
(a) Radiator rubber hoses.
1
-
-
... More
(b) Clamp for hump hose.
2
-
-
... More
(c) Hose clamps.
2
-
-
... More
(d) hump hose.
2
-
-
... More
M&L for replacement of unserviceable spares for water manifold and Radiator spares above 63 and up to 182.5 KVA DG set for the following spares:-
(a) Radiator rubber hoses.
2
-
-
... More
(b) Clamp for hump hose.
2
-
-
... More
(c) Hose clamps.
2
-
-
... More
(d) hump hose.
2
-
-
... More
M&L for replacement of unserviceable spares for water manifold and Radiator spares above 182.5 kVA and up to 250 KVA DG set for the following spares:-
(a) Radiator rubber hoses.
2
-
-
... More
(b) Clamp for hump hose.
2
-
-
... More
(c) Hose clamps.
2
-
-
... More
(d) hump hose.
2
-
-
... More
M&L for Inhibitor corrosion (coolant additive concentrate) required for top up (TVS Make) complete all as directed by Engr-in-charge.
50
-
-
... More
Supply and topping up of acid mixture suitable for lead acid batteries of 12 volts complete all as directed by Engr-in-charge.
4
-
-
... More
Supply and topping up of distilled water suitable for lead acid batteries of 12 volts complete all as directed by Engr-in-charge.
8
-
-
... More
S&F battery brass terminal and jelly complete all as specified and directed.
4
-
-
... More
M&L for Disconnecting all connection & remove the PT pump from engine and transport to OEM authorised service centre and Calibration of PT pump for maximum efficiency by OEM Authorised Service centre & replacement of PT Pump kit, gear gasket, etc in its original position by making all necessary connections complete whichever required under AGE E/M-I(U) AOR for smooth functioning of following DG Set capacities complete all as directed by Engr-in-charge
(a) DG Set capacity up to 63KVA
2
-
-
... More
(b) DG set capacity above 63KVA to 182.5KVA
2
-
-
... More
M&L for remove the fuel injection pump from the engine transport to an authorized service centre for service, calibration and to adjust by replacing the following un serviceable worn-out spares with new appropriate make minor spares and bringing and fixing to the engine and tune up for maximum efficiency all as specified and as directed for DG set capacity up to 63 KVA :-
Note: Major spares required will be measured and paid separately.
3
-
-
... More
Supply only orifice for up to 63KVA capacity DG set
2
-
-
... More
Supply only Barrel and Plunger for up to 63KVA capacity DG set
2
-
-
... More
Supply only FIP Bearing for up to 63KVA capacity DG set
2
-
-
... More
M&L for remove the fuel injection pump from the engine transport to an authorized service centre for service, calibration and to adjust by replacing the following un serviceable worn-out spares with new appropriate make minor spares and bringing and fixing to the engine and tune up for maximum efficiency all as specified and as directed for DG set capacity above 63 KVA and up to 182.5KVA :-
Note: Major spares required will be measured and paid separately.
2
-
-
... More
Supply only orifice for above above 63 KVA and up to 182.5KVA capacity DG set
2
-
-
... More
Supply only Barrel and Plunger for above 63 KVA and up to 182.5KVA capacity DG set
2
-
-
... More
Supply only FIP Bearing for above 63 KVA and up to 182.5KVA capacity DG set
2
-
-
... More
M&L for remove the fuel injection pump from the engine transport to an authorized service centre for service, calibration and to adjust by replacing the following unserviceable worn-out spares with new appropriate make minor spares and bringing and fixing to the engine and tune up for maximum efficiency all as specified and as directed for DG set capacity above 182.5 KVA and up to 250KVA :-
Note: Major spares required will be measured and paid separately.
2
-
-
... More
Supply only orifice for above 182.5 KVA and up to 250KVA capacity DG set
1
-
-
... More
Supply and fix self starter Motor, 24 volts, Make LUCAS or its equivalent make approved by OEM of DG Set suitable for existing DG set above 82.5 KVA to 250 KVA including making all necessary electrical/mechanical connection as per recommendation of OEM of DG Set & dismantling/taking out old unserviceable self starter Motor from existing position complete all as directed by Engr-in-charge
1
-
-
... More
Supply and fix self starter Motor, 12 volts, Make LUCAS or its equivalent make approved OEM of DG Set suitable for existing DG set capacity up to 82.5 KVA including making all necessary electrical/mechanical connection as per recommendation of OEM of DG Set & dismantling/taking out old unserviceable self starter Motor from existing position complete all as directed by Engr-in-charge
1
-
-
... More
M&L for Servicing of DG Set panel's MCCB Breaker indoor/outdoor type of any make/model/capacity, checking of switching ON/OFF & tripping system, checking of all electrical mechanical components of AMF panel and Setting the same for proper working of Breaker, testing of operation manually and auto mode complete all as directed by Engr-in-charge.
Note:-All the mechanical parts are thoroughly cleaned by suitable cleaning agent & moving parts are properly lubricated
2
-
-
... More
Supply, install, test, commissioning & run the DG set's Fly-wheel Ring of Fly-wheel Assembly of existing model, size suitable to DG Set of capacity up to 125 KVA including taking down old Unserviceable complete all as directed by Engr-in-Charge.
2
-
-
... More
Supply, install, test, commissioning & run the DG set's Fly-wheel Ring of Fly-wheel Assembly of existing model, size suitable to existing DG Set of capacity above 125kVA up to 250 KVA including taking down old Unserviceable complete all as directed by Engr-in-Charge.
2
-
-
... More
Disconnect the Radiator and kept aside safely and taking down the old unserviceable water pump from the existing engine of DG set any make/model, capacity up to 125 KVA supply and fixing of new water pump & kit, reassembling the same and refixing the pump to the engine of DG set, refixing Radiator and testing, including making all Electrical/mechanical connections, commissioning as per OEM recommendation complete all as directed by Engr-in-charge.
1
-
-
... More
Disconnect the Radiator and kept aside safely and taking down the old unserviceable water pump from the existing engine of DG set any make/model, capacity above 125KVA and up to 250 KVA supply and fixing of new water pump & kit, reassembling the same and refixing the pump to the engine of DG set, refixing Radiator and testing, including making all Electrical/mechanical connections, commissioning as per OEM recommendation complete all as directed by Engr-in-charge.
2
-
-
... More
Supply, Fix & test run the DG set after replacing Diesel feeder Pump of existing model, size suitable to DG Set of capacity up to 125 KVA including taking down old unserviceable complete all as directed by Engr-in-Charge.
1
-
-
... More
Supply, Fix Diesel benjo Hose pipes of 1.0 Meter length with both edges brass clamps of existing model suitable to DG Set of capacity up to 125 KVA including taking down old unserviceable complete all as directed by Engr-in-Charge.
2
-
-
... More
Supply, Fix Diesel benjo Hose pipes of 1.0 Meter length with both edges brass clamps of existing model suitable to DG Set of capacity above 125kVA up to 250 KVA including taking down old unserviceable complete all as directed by Engr-in-Charge.
2
-
-
... More
Material and labour for repairs to Alternator of following DG Set, transporting the same to the OEM authorised service centre/work shop and carrying out the repairs such as taking out the burnt out winding and rewinding the alternator with copper wire of same gauge turns and weight, checking of commentator, brushes complete and refixing the same in its existing position after transporting back to the site and connecting up electric connections with suitable lugs complete and testing all as specified and directed.
Note: Copper winding material will be measured and paid separately under relevant Item
-
-
-
... More
Up to 100 KVA capacity
1
-
-
... More
Above 100 KVA and up to 125 KVA Capacity
1
-
-
... More
Supply only High conductivity copper conductor winding material including necessary insulation material as required for complete all as specified and directed by Engr-in-Charge
70
-
-
... More
M&L taking down defective Turbo Charger Assembly duly disconnecting the mechanical and electrical connections from DG Set, opening and thoroughly checking to carry out repairs complete to the Turbo Charger Kit and spares as required at site including any mechanical and reassembling and refixing the turbo charger assembly to its original position and reconnecting the same for the following capacities including testing complete all as specified and directed.
-
-
-
... More
DG Set of capacity above 40 KVA and up to 82.5 KVA
2
-
-
... More
DG Set of capacity above 100 KVA and up to 182.5 KVA
2
-
-
... More
M&L for calibration of water pump complete, overhauling, replacing of gaskets, nuts, washers etc and reassembling the same and refixing the pump to the engine and testing including taking down the old unserviceable water pump of any capacity of DG set from the engine and taking it out side work to workshop, complete all as specified and directed:-
-
-
-
... More
DG Set of capacity 7.5 KVA To 40 KVA
3
-
-
... More
DG Set of capacity above 40 KVA and up to 82.5 KVA
2
-
-
... More
DG Set of capacity above 100 KVA and up to 182.5 KVA
2
-
-
... More
M & L for dismantling & disconnecting all connection of the cylinder heads from diesel engine and sent to OEM authorised Service centre for calibration and repairs by replacing the spares such as Valves, Value Guides, Valves seats and repairs kit and re-assembling to its original position with necessary Engine cylinder head gasket and O rings for the following capacities including testing complete all as specified and directed:-
-
-
-
... More
DG Set of capacity 7.5 KVA To 40 KVA
2
-
-
... More
DG Set of capacity above 40 KVA and up to 82.5 KVA
1
-
-
... More
DG Set of capacity above 100 KVA and up to 182.5 KVA
1
-
-
... More
M&L preparation of old painted surfaces of the DG Sets of the 7.5 KVA to 25 KVA capacity including degreasing and spray painting the DG sets with one coat of synthetic enamel paint of approved colour and writing SM/MES No including painting on concrete surfaces of foundations with black paint complete all as specified and directed.
1
-
-
... More
M&L preparation of old painted surfaces of the DG Sets of the above 25 KVA and up to 82.5 KVA capacity including degreasing and spray painting the DG sets with one coat of synthetic enamel paint of approved colour and writing SM/MES No including painting on concrete surfaces of foundations with black paint complete all as specified and directed.
2
-
-
... More
M&L preparation of old painted surfaces of the DG Sets of the above 82.5 KVA and up to 182.5 KVA capacity including degreasing and spray painting the DG sets with one coat of synthetic enamel paint of approved colour and writing SM/MES No including painting on concrete surfaces of foundations with black paint complete all as specified and directed.
1
-
-
... More
M&L in repairs, Earthing complete with galvanized steel earth plate electrode of size 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25m deep below the normal ground level) with top edge of plate not less than 1.5m below normal ground level connected to GI wire 4mm dia as earth lead by means of bolts, nuts, washers and check nuts made out of galvanized iron or steel all as shown on Electrical Plate No. 3 of SSR Part-I including testing on completion complete all as specified and directed by Eng-in-charge.
6
-
-
... More
Note: The unit rate shall also include for earth work in any type of soil, PCC (1:3:6) type C1 chamber, RCC 1:2:4 type B-1 using 20mm graded stone aggregate, 50mm thick cover slab reinforced with 6 Nos of 8mm dia TMT bars both ways, funnel with watering pipe 20mm dia medium grade, GI protection pipe medium grade 15mm dia and wire mesh complete in addition to item No. 1(a) to (e) of preamble (Notes) under sub-heading earthing, specified on Sl. Page No. 422 of SSR Part-II.
-
-
-
... More
M&L on load change over switch 400 Amps capacity suitable for 3 phase, 4 pole, 415 Volts,font handle operated suitable in open execution type for fixing in existing panels including necessary lugs,glands.,nuts, bolts including taking down old unserviceable one complete all as specified and directed
Make:- Havells/L&T/Standard/HPL
1
-
-
... More
M&L on load change over switch 200 Amps capacity suitable for 3 phase, 4 pole, 415 Volts,font handle operated suitable in open execution type for fixing in existing panels including necessary lugs,glands.,nuts, bolts including taking down old unserviceable one complete all as specified and directed
Make:- Havells/L&T/Standard/HPL
1
-
-
... More
M&L Off load change over switch 200 Amps capacity suitable for 3 phase, 4 pole, 415 Volts, side handle operated with sheet metal enclosure suitable for fixing in existing panels including necessary lugs,glands.,nuts, bolts including taking down old unserviceable one complete all as specified and directed
Make:- Havells/L&T/Standard/HPL
1
-
-
... More
M&L Off load change over switch 400 Amps capacity suitable for 3 phase, 4 pole, 415 handle operated with sheet metal enclosure suitable for fixing in existing panels including necessary lugs,glands.,nuts, bolts including taking down old unserviceable one complete all as specified and directed
Make:- Havells/L&T/Standard/HPL
1
-
-
... More
M&L, for checking, overhauling, of seized cylinder with piston and repair of same by grinding /lining including cylinder head reconditioning , injection pump repair and calibration, fuel pump calibration, turbo charger repair and calibration, checking of self starter, checking of alternator and servicing of alternator including following spare parts for 125 KVA DG set complete all as specified and directed by Eng-in-charge.
a) Piston Assembly - 2 No's
b) Piston - 2 No's
c) Set of Piston Rings - 2 No's
d) Linners - 2 No's
e) C.R.Bearings - 2 No's
f) Nozzle for cooling oil - 3 No's
g) Set of hoses - 1 Set
h) Set of Hose Clips - 1 Set
j) Set of clamps - 1 Set
k) Set of "O'Rings - 4 No's
l) Set of Gaskets - 1 Set
m) Injector sleeves - 4 No's
n) Injector over flow washers - 4 No's
1
-
-
... More
o) Cylinders liners - 2 No's
p) Gasket Cylinder Head - 4 No's
q) Air filter Inner Element - 1 No's
r) Air Filter Outer Element 1 No's
s) Element Lube oil Filter - 1 No's
t) Fuel Filter-secondary - 1 No's
u) Flexible Pipe Set - 1 No's
v) V belt cogged - 2 No's
w) Cogged Belt - 1 No's
x) Set of Sealing Rings - 1 No's
y) Coolant - 10 Ltrs
z) Lube oil -20 Ltrs
-
-
-
... More
aa) Head dammy - 7 Nos
ab) Grove Nut - 2 No's
ac) Grove Nut 'O' Ring - 2 No's
ad) Grove Nut Washer - 2 No's
ae) Anabond tube -1 No
af) 14MM Copper Washer - 5 No's
ag) Oil Sump packing - 1 Set
ah) Rocker Copper gasket - 2 No's
-
-
-
... More
M&L in repairs, Earthing complete with copper earth plate electrode of size 600 x 600 x 3.15mm thick buried directly in ground (earth pit not less than 2.25m deep below the normal ground level) with top edge of plate not less than 1.5m below normal ground level connected to copper strip 20x3mm as earth lead by means of bolts, nuts, washers and check nuts made out of galvanized iron or steel all as shown on Electrical Plate No. 3 of SSR Part-I including testing on completion complete all as specified and directed by Eng-in-charge.
6
-
-
... More
Note 1: The unit rate shall also include for earth work in any type of soil, PCC 1:3:6 type C1 chamber, 50mm thick RCC 1:2:4 type B-1 using 20mm graded stone aggregate cover slab reinforced with 6 Nos of 8mm dia TMT bars both ways, funnel with watering pipe 20mm dia medium grade, GI protection pipe medium grade 25mm dia and wire mesh complete in addition to item No. 1(a) to (e) of preamble (Notes) under sub-heading earthing, specified on Sl Page No. 422 of SSR Part-II.
-
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%