Military Engineer Services Tender

For getting the details of etenders, if you are looking for information about them from the cumbersome government websites but are tired of doing so, Bidassist comes up with a one stop solution. It collates every Eproc telangana tender on Bidassist. One can approach it for the bidding process, registration process, etc., are explained below.

Military Engineer Services - MES Tender

Works
Civil And Construction
Civil Works Others
Building Construction
Eprocure
Opening Date13 Dec 2024
Closing Date3 Jan 2025
Tender Amount₹ 40,00,000 
Notes
Download

Costs

Description

Unlock the Tender details for free
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user

Contact

Unlock the Tender details for free
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost

BOQ Items

... More
DO_NOT_SHOW

-

-

-

View all details for FREE
... More
Fixing only the loose/ hanging wooden pelmet boxes in position by using plug/ wooden gutties embeeded in wall making good in cement mortar 1:3 duly fixed with mild steel holder clips including tightening of the screws etc in all respects (each pelmet not exceeding 2.5 metre length) and make it functional complete all as specified and as directed by Engineer-in-Charge.

50

-

-

... More
Supply and fix in repairs anodized aluminium alloy powder coated curtain rod 19 mm dia of standard thickness with fixing brackets, stops, rollers etc complete all as specified and as directed by Engineer-in-Charge.

200

-

-

... More
Supply and fix stainless steel curtain rod of 25 mm bore fancy type complete all as specified and as directed by Engineer-in-Charge.

300

-

-

... More
Supply and fix in repairs for stainless steel curtain rod brackets (decorative type) suitable for curtain rod of 25 mm dia, complete all as specified and as directed by Engineer-in-Charge.

120

-

-

... More
Supply and fix in repairs 140 mm long double legged door stopper of aluminium anodized with rubber shoe, nut (2 each on one stopper) with spring complete all as directed complete all as specified and as directed by Engineer-in-Charge.

150

-

-

... More
Supply and fix in repairs door closer, hydraulically regulated, aluminium body designation No 2 universal type (ISI marked), suitable for shutters of 701 to 850 mm width of weight between 36 to 60 Kilo gram fixed complete all as specified and as directed by Engineer-in-Charge.

10

-

-

... More
Supply and fix in repair mild steel butt hinges of 100 mm size, medium weight, cold rolled, mild steel complete all as specified and as directed by Engineer-in-Charge.

100

-

-

... More
Supply and fix in repairs mild steel butt hinges of 75 mm long, medium weight, cold rolled complete all as specified and as directed by Engineer-in-Charge.

50

-

-

... More
Supply and fix in repairs 200 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and as directed by Engineer-in-Charge.

100

-

-

... More
Supply and fix in repairs 150 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and as directed by Engineer-in-Charge.

60

-

-

... More
Supply and fix in repairs 200 mm long mild steel barrel tower bolt of extruded section stove enamelled black with bright bolt complete all as specified and as directed by Engineer-in-Charge.

50

-

-

... More
Supply and fix in repairs 150mm long extruded aluminium alloy handle, fabricated type complete all as specified and as directed by Engineer-in-Charge.

50

-

-

... More
Supply and fix in repairs 200 mm long mild steel helical door ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed by Engineer-in-Charge.

80

-

-

... More
Supply and fix in repairs 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed by Engineer-in-Charge.

20

-

-

... More
Material and labour in repairs 18mm thick Plywood grade BWR type BB, fixed with screws to frame work, fixed with svrews to timber frame work complete all as specified and as directed by Engineer-in-Charge.

70

-

-

... More
Material and labour in repairs 12 mm thick Plywood grade BWR type BB , fixed with screws to frame work, fixed with svrews to timber frame work complete all as specified and as directed by Engineer-in-Charge.

35

-

-

... More
Material and labour Decorative laminate 0.9mm thick Type I of texture surface finish, colour and pattern as approved fixed to plywood face/dges as required with approved adhesive to as per manufacturer's instruction complete all as specified and as directed by Engineer-in-Charge.

52.5

-

-

... More
Material and labour in repairs MDF board, 18/19 mm thick exterior grade, pre-laminated both side decorative face lamination fixed with screws ,brackets to timber frame work with and including 1st class hard wood, 6 mm thick all around edging, complete all as specified and as directed by Engineer-in-Charge.

40

-

-

... More
Material and labour in repairs MDF board, 12 mm thick exterior grade, pre-laminated both side decorative face lamination fixed with screws ,brackets to timber frame work with and including 1st class hard wood, 6 mm thick all around edging, complete all as specified and as directed by Engineer-in-Charge.

25

-

-

... More
Supply and fix in repairs Continuous (piano) hinges,mild steel, bright finish or electrogalvanised 40mm width of flap fixed with screws complete all as specified and as directed by Engineer-in-Charge.

30

-

-

... More
Supply and fix 200mm long stainless steel decorative handle fixed with screws complete all as specified and as directed by Engineer-in-Charge.

30

-

-

... More
Supply and fix 200mm long stainless steel hinge for cabinets auto close concealed type complete all as specified and as directed by Engineer-in-Charge.

30

-

-

... More
Supply and fix stainless steel telescopic type ball bearing drawer channel of any size complete all as specified and as directed by Engineer-in-Charge.

30

-

-

... More
Supply and fix stainless steel kitchen basket of size 17"x20"x4" of size complete all as specified and as directed by Engineer-in-Charge.

12

-

-

... More
All as per item No.27 above but of size 17x"x20"x6" complete all as specified and as directed by Engineer-in-Charge.

12

-

-

... More
All as per item No.27 above but of size 17x"x20"x8 complete all as specified and as directed by Engineer-in-Charge.

12

-

-

... More
Supply and fix Stainless steel dust bin holder 10" dia complete all as specified and as directed by Engineer-in-Charge.

7

-

-

... More
Supply and fix stainless steel bottle pullout of size 106 mm X 476 mm X 130 mm complete all as specified and as directed by Engineer-in-Charge.

7

-

-

... More
Supply and fix in repairs 100 mm size hasp and staple, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and as directed by Engineer-in-Charge.

60

-

-

... More
Material and labour IInd class hard wood plain fillets of sectional area exc 6 and not exc 13 sqcm area .square,rectangular or triangular insection, clean sawn, secured with nails or brads.with bullnosed,splayed, chamfered or rounded on one edge or face complete all as specified and as directed by Engineer-in-Charge.

50

-

-

... More
Material and labour II nd class hard wood plain fillets of sectional area exc13 and not exc 25 sq.cm area .square,rectangular or triangular insection, clean sawn, secured with nails or brads.with bullnosed,splayed,chamfered or rounded on one edge or face complete all as specified and as directed by Engineer-in-Charge.

50

-

-

... More
Supply and fix 40mm dia, cuboard knobs brass, polished and fixed with nut, screw and washer of mild steel ,bright finished etc complete all as specified and as directed by the Engineer in charge.

100

-

-

... More
Supply and fix in repairs 2nd class hard wood plain small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stopes and the like, including all necessary labours, articales not exc 200cum each complete all as specified and as directed by Engineer-in-Charge.

40

-

-

... More
Taking down shutters of any description exc 1 Sqm but not exc 2 Sqm each complete all as specified and as directed by Engineer-in-Charge.

20

-

-

... More
Refixing in same opening of any description exc 1 sqm each but not exceeding 2 Sqm each complete all as specified and as directed by Engineer-in-Charge.

20

-

-

... More
Taking down chowkats or frames with shutters (without taking off shutters from frames) of size exceeding 1.5 sqm and not exc 4.00 sqm each complete all as specified and as directed by Engineer-in-Charge.

20

-

-

... More
Taking down chowkats or frames with shutters (without taking off shutters from frames) of size not exceeding 1.5 SQMs each complete all as specified and as directed by Engineer-in-Charge.

15

-

-

... More
Supply and fix Solid PVC door frame of size 50 x 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube, all as specified and shown in Section 8 of MES Schedule Part-II 2010 complete all as specified and as directed by Engineer-in-Charge.

40

-

-

... More
Supply and fix Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawings given in Section 8 of MES Schedule Part-II 2010 as applicable complete all as specified and as directed by Engineer-in-Charge.

13.65

-

-

... More
Supply and fix 125 x 60 mm pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc with one coat of primer complete all as specified and as directed by Engineer-in-Charge.

22.5

-

-

... More
Supply and fix pressed steel frame of size 105 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc with one coat of primer complete all as specified and as directed by Engineer-in-Charge.

22.5

-

-

... More
Supply and fix 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid rounded or chambered, put together with glue pinned at joints complete all as specified and as directed by Engineer-in-Charge.

0.18

-

-

... More
Preparation of wood surface, treating the back of chowkhat, end of post etc area tarred exceeding 0.1 Sqm but not exc 0.5 sqm each etc complete all as specified and as directed by Engineer-in-Charge.

0.2

-

-

... More
Treating small articles such as hold fasts, ends of posts, backs of chowkats etc area n.exc .10Sqm each etc complete all as specified and as directed by Engineer-in-Charge.

0.3

-

-

... More
Cutting holes in brick wall built in cement mortor for inserting hold fast and making good the disturbed portion in cement mortor 1:3 depth of embeded portion exc half brick & N.exc one brick etc complete all as specified and as directed by Engineer-in-Charge.

90

-

-

... More
Material and labour for plain cement concrete 1:2:4, type B1 (using 20 mm graded stone aggregate) as in coping, bed plates, filling back hollow portion of chowkats complete all as specified and as directed by Engineer-in-Charge.

0.37

-

-

... More
Supply and fix 30mm thick flush shutters solid core construction with block board core and ply wood face panels, commercial type on both sides etc complete all as specified and as directed by Engineer-in-Charge.

16

-

-

... More
Supply and fix 35 mm thick factory made second class hardwood, plain framed panelled shutters (any number of panel) with panels of timber flat on both sides(feather edged) or of veneered particle board medium density wood particle board with commercial veneering on both faces. complete all as specified and as directed by Engineer-in-Charge.

17

-

-

... More
Supply and fix 30 mm 1st class hard wood factory made glazed and skelton shutters, open rebated and prepared to receive glass, gauge etc (without sash bars) edge of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc size of member of shutter as specified in SSR Part-I section 8 clause 8.24(a) etc complete all as specified and as directed by Engineer-in-Charge.

26.87

-

-

... More
Supply and fix Stainless steel wire cloth.0.36mm nominal dia of wire and average width of aperture1.40mm and fixed withstainless steel wire staples complete all as specified and as directed by Engineer-in-Charge.

16.12

-

-

... More
Supply and fix butt hinges of 100mm size extruded aluminium alloy with galvanised mild steel hinge pin, anodised, type C-21 complete all as specified and as directed by Engineer-in-Charge.

60

-

-

... More
Supply and fix Butt hinges MS 100 mm cold rolled complete all as specified and as directed by Engineer-in-Charge.

90

-

-

... More
Supply and fix 150 mm long aluminium anodised barrel tower bolt of extruded section with bright bolt complete all as specified and as directed by Engineer-in-Charge.

70

-

-

... More
Supply and fix extruded aluminium alloy handles, fabricated type, anodised of 150 mm size complete all as specified and as directed by Engineer-in-Charge.

70

-

-

... More
Supply and fix mild steel sliding bolt 300 mm long plate type stove enameled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fix complete all as specified and as directed by Engineer-in-Charge.

10

-

-

... More
Material and labour applying two coats of synthetic enamel paint over a coat of prink primer on wood or wood based material over 10 cm width or girth including preparation of new wood surface etc complete all as specified and as directed by Engineer-in-Charge.

128.78

-

-

... More
Material and labour for completly Removing and scarapping of existing old wooden doors & windows paint by paint removers or burning off by blow lamps and cleaning with scrapers, any number of coats, any width or girthand Unit rate quoted shall include for necessary scaffolding, trestles, ladders & cradles required for execution of the work and protective works , etc complete all as specified and as directed by Engineer-in-Charge.

50

-

-

... More
Material and labour for applying two coat of French polishing with primer (description,the main material is shalleac) on old surfaces of any width or girth duly preparation and cleaning of the old surfaces complete all as specified and as directed by Engineer-in-Charge.

50

-

-

... More
Material and labour for applying one coat of French polishing on old surfaces of any description, width or girth duly preparation and cleaning of the old surfaces complete all as specified and as directed by Engineer-in-Charge.

50

-

-

... More
Supply and fix in repairs 200 mm long Brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed with necessry brass screws etc, complete all as specified and as directed by Engineer-in-Charge.

10

-

-

... More
Supply and fix in repairs 300 mm long Brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts andfixed with necessry brass screws etc, complete all as specified and as directed by Engineer-in-Charge.

10

-

-

... More
Supply and fix in repairs 300 mm long Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed with necessry brass screws etc, complete all as specified and as directed by Engineer-in-Charge.

10

-

-

... More
Supply and fix in repairs 125 mm long Brass Butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed, type C-11 and fixed with necessry brass screws etc, complete all as specified and as directed by Engineer-in-Charge.

10

-

-

... More
Supply and fix in repairs 125 mm long Brass Extruded brass handles, fabricated type polished and fixed with necessry brass screws etc, complete all as specified and as directed by Engineer-in-Charge.

10

-

-

... More
Hacking out old broken glass (any thickness, size, quality or description) from wooden surface concrete or brick surrounds. Glazed with putty or fixed with beads complete all as specified and as directed by Engineer-in-Charge.

100

-

-

... More
Supply and fix sheet glass 3mm thick ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane complete all as specified and as directed by Engineer-in-Charge.

50

-

-

... More
Supply and fix sheet glass 3mm thick ordinary quality and glazing with oil putty in square but exceeding 0.5 Sqm in each pane complete all as specified and as directed by Engineer-in-Charge.

40

-

-

... More
Supply and fix figured glass pin head type 3mm thick ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane complete all as specified and as directed by Engineer-in-Charge.

10

-

-

... More
Supply and fix in repairs Stainless steel wire cloth.0.36mm nominal dia of wire and average width of aperture1.40mm and fixed withstainless steel wire staples complete all as specified and as directed by Engineer-in-Charge.

100

-

-

... More
Supply and fix in repairs 0.56 mm thick plain anodised Aluminium sheeting alloy 31000 H4 in covering to door shutters etc fixed with aluminium alloy screws complete all as specified and as directed by Engineer-in-Charge.

20

-

-

... More
Taking down steel/aluminium windows/ventilator/Doors complete with frames and shutters (without taking off the shutters) of area not exc 2.00 sqm complete all as specified and as directed by Engineer-in-Charge.

15

-

-

... More
Supply and fix standard aluminum sections of any Type as in doors, windows, ventilators, partitons etc, powder coated, cut to size, jointed with cadmium plated steel screws, including necessary jointing clips, rubber packing, neoprene rubber gasket, aluminium snap beading, screws, aluminium fittings, handles, locking arrangement (star lock), Nylon ball bearings and Unit rate quoted shall be deemed to include for sealing the gap of frame with Jamb and Cill (alround) using silicon gel at the rate of 0.05 lit/m for both faces of window etc complete all as specified and as directed by Engineer-in-Charge. Note :- Weight of Aluminum sections for frames and shutters shall be only considered for payment. Cost of other consumables required for the item shall be deemed to be included in the quoted rate. However glass panes / Bakelite sheet only will be measured and paid separately under respective items as supply only. Fixing by element of these items shall be deemed to be included in quoted rate.

100

-

-

... More
Supply only 4.8 mm thick sheet glass, ordinary quality, in each pane for n exc 0.50 Sqm each pane for aluminium sliding windows/ventilator shutters etc complete all as specified and as directed by Engineer-in-Charge..

7.5

-

-

... More
Supply only 4.8 mm thick sheet glass, ordinary quality, in each pane for exc 0.50 Sqm each pane for aluminium sliding windows/ventilator shutters etc complete all as specified and as directed by Engineer-in-Charge..

6

-

-

... More
Supply only stainless steel wire cloth of 0.36 mm nominal dia of wire and average width of aperture 1.40 mm , fixed in aluminium windows complete all as specified and as directed by Engineer-in-Charge..

7.5

-

-

... More
Supply only for 12mm thick Veneered decorative plywood,grade I (with BWR resin) decorative both side faces etc complete all as specified and as directed by Engineer-in-Charge.

6

-

-

... More
Material and labour for Framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 Gde E-165 complete all as specified and as directed by Engineer-in-Charge.

150

-

-

... More
Dismantling of wrought iron or MS works of any description such as ,chajja etc, including necessary straightening of bends complete all as specified and as directed by Engineer-in-Charge..

3

-

-

... More
Dismantling of CGI/PGI sheet roofing any gauge and any thickness including ridge, valley gutter etc complete all as specified and as directed by Engineer-in-Charge.

89.6

-

-

... More
Material and labour welding in repairs not exceeding 2.5 cm in length with thickness of metal not exceeding 6mm complete all as specified and as directed by Engineer-in-Charge.

25

-

-

... More
Material and labour welding in repairs exceeding 2.5 cm but not exceeding 5 cm in length with thickness of metal not exceeding 6mm complete all as specified and as directed by Engineer-in-Charge. Note: (1) Works shall be carried out in multi storey Building upto 2nd floor.

30

-

-

... More
Material and labour for Plates (plain or chequered) channels. Square cut or notched (ordinary and counter sunk) forming holes, without any attachment etc conforming to Fe 410-W Gde E-250 quality A andcomplete all as specified and as directed by Engineer-in-Charge. .

75

-

-

... More
Supply and fix rolled mild steel sections of Fe 410-W (GDE E-250) QUALITY “A” frame work as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates complete all as specified and as directed by Engineer-in-Charge.

300

-

-

... More
Supply and fix wind ties for roof including securing bolts including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 290 Gde E-165 etc complete all as specified and as directed by Engineer-in-Charge..

90

-

-

... More
Supply and fix pre-painted galvalume aluminium zinc coating galvanised based corrugated steel sheet of 0.50 mm thick of approved colour having tensile strength of 550 Mpa as roof covering/cladding to wall fixed with self tapping (SD) screws complete all as specified and as directed by Engineer-in-Charge.

80

-

-

... More
Supply and fix pre-painted galvalume aluminium zinc coating galvanised based plain steel sheet of 0.50 mm thick of approved colour having tensile strength of 550 Mpa as ridge, gutters fixed with self tapping (SD) screws complete all as specified and as directed by Engineer-in-Charge.

9.6

-

-

... More
Material and labour for new or previously untreated steel surfaces of any description, over 10 cm in width or girth, not otherwise described and apply two coats of synthetic enamel paint (ordinary tint) including priming with red oxide, zinc chrome complete all as specified and as directed by Engineer-in-Charge. by Engr-in-Charge.

61.25

-

-

... More
Taking down of old bituminous tarfelt or any other type of roof treatment from roof/ concrete surfaces removal to distance exceeding 250 metres and not exceeding 500 metres from the site and cleaning of the roof surface with wire brush to make it free from dust, dirt etc complete all as specified and as directed by Engineer-in-Charge.

180

-

-

... More
Material and labour for rendering 10mm thick on roof surfaces in cement mortar 1:4 duly mixing with water proofing compound at the rate of 3% by weight of cement and finished even and smooth complete all as specified and as directed by Engineer-in-Charge. Note: Water proofing compound will be measured and paid separately under relevant item in this schedule

180

-

-

... More
Material and labour for providing water proofing treatement with APP based polymeric membrane minimum weighing 3 kg/ Sqm and minimum 3mm thick reinforced with polyester non oven fabric ( weight not less than 150gm/Sqm) applyied on one coat of oil based bitumen emulision primer @ 0.3 lit per sqm ( OR as per the directions of manufacturer instructions) including cleaning of surface thoroughly from dust, dirt and projections. Laying of membrane by forced ( torch) application with 10cm overlaps . A coat of blown bitumen 85/25 grade @ 1.2 Kg/sqm to be applied on top of memberane, finally coating the surface with bituminous aluminium paint @ 100gm/Sqm complete all as specified and as directed by Engineer-in-Charge.

180

-

-

... More
Material and labour for wire brush and cleaning any type over roof and chhajja top surface etc, including flashings and junction of parapets, etc., and surface painting, with a layer of blown bitumen of any penetration applied hot @ 1.7 kg per sq. m, blinded with grit or pea size gravel @ 0.006 cu. m per sq. m, and lightly tampered (area of flashings, etc., shall be added to the roof area) complete all as specified and as directed by Engineer-in-Charge.

100

-

-

... More
Dismantling wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards / slabs / blankets any thickness including cover fillets etc complete all as specified and as directed by Engineer-in-Charge...

158

-

-

... More
Supply and fixing in repairs false ceiling of Mineral Fibre Acoustical Suspended Ceiling System with FINE EDGE TILES ARMSTRONG SILHOUETTE EXPOSED GRID SYSTEM. The tiles should have humidity Resistance (RH of 99%, NRC 0.55 Light reflectance 85% thermal conductivity K=0.052-0.057 w/m k. colour white, fire performance class O class 1 (BS476 Part 6 & 7) in module size of 600 x 600 x 16 mm thick with Bio black coating on the face of the tile, suitable for Green building application, with the re cycled content of 63%. The tile shall be laid on Silhouette profile grid system with 15mm white flanges incorporating a 6mm central reveal in white/black colour and with a web height of 45mm and a load carrying capacity of minimum 15.68 Kg per Squaremetre. Silhouette main rummers & cross Tees to have mitred ends and "birdsmouth" notches to provide mitred Cruciform junctions. The Tee sections should have a galvanizing of 120 grams per squaremetre & passed through 500 hours of salt test complete all as specified and as directed by Engineer-in-Charge. Note : The quoted rate is deemed to be inclusive of cost of necessary scaffolding work required at site. Make: Armstrong or equivalent as approved by GE

40

-

-

... More
Supply and fix E Grid suspended false ceiling grid system of size 600 x 600mm with main runner 38x24.7x0.30mm cross tee 26x24x0.30mm and wall angle 24x24x0.30mm ceiling suspended with 2 to 2.5 mm dia GI wire hanger fixed to purlin / truss etc complete (Main runner, cross tee, wall angle of MS galvanised with PPCGS) over the grid providing 4mm thick HPSC pre primed self designer texture non asbestos fibre cement building board fixed to frames etc complete all as specified and and as directed

118

-

-

... More
Taking down cement plaster from brick/stone wall of any description etc including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed by Engineer-in-Charge.

175

-

-

... More
Material and labour for rendering 15 mm thick on fair faces of brick work or stone masonary surfaces in cement mortar 1:4 and finished the surface smooth and even without using extra cement complete all as specified and as directed by Engineer-in-Charge.

190

-

-

... More
Material and labour for rendering 12 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 without using extra cement complete all as specified and as directed by Engineer-in-Charge.

85

-

-

... More
Material and labour for rendering 5 mm thick in cement plaster 1:3 on concrete surfaces of ceiling finished even and smooth without using extra cement in patches n exc 3 sqm each patch complete all as specified and as directed by Engineer-in-Charge.

35

-

-

... More
Material and labour for preparation of newly plastered surfaces of walls and applying two coats of cement based paint over a coat of alkali resistant primer complete all as specified and as directed by Engineer-in-Charge.

190

-

-

... More
Material and labour for preparation of newly plastered wall surfaces and applying three coats of white wash complete all as specified and as directed by Engineer-in-Charge.

50

-

-

... More
Material and labour for preparation of newly plastered wall surfaces and applying three coats of white wash on celings complete all as specified and as directed by Engineer-in-Charge.

35

-

-

... More
Material and labour for preparation of newly plastered wall surfaces and applying two coats of oil bound distemper over a coat of alkali resistant primer and wall putty etc complete all as specified and as directed by Engineer-in-Charge.

35

-

-

... More
Demolition of brickwork or stone/boulder masonry, built in cement mortar with all quoins, arches, pillars, etc but excluding ashlar facings, dressed stone work and precast concrete articles including disposal of the rubbish out off the premises complete all as specified and as directed by Engineer-in-Charge.

4.5

-

-

... More
Material and labour for brick work with fly ash bricks old size, straight or curved on plan exceeding 6.0 metre mean radius built in cement mortar 1:6 complete all as specified and as directed by Engineer-in-Charge.

3

-

-

... More
Material and labour for half brick thick walls with sub-class ‘B’ old size bricks, straight or curved on plan to any radius built in cement mortar 1:4 complete all as specified and as directed by Engineer-in-Charge.

12

-

-

... More
Demolition of cement concrete (unreinforced) in floor of paving not exceeding 15 centimetres thick below or above ground level complete all as specified and as directed by Engineer-in-Charge.

15.75

-

-

... More
Material and labour for 75 mm thick plain cement concrete 1:3:6, type C2 (using 40 mm graded stone aggregate) in plinth protection / paths laid in alternative bays finished even and smooth without using extra cement including making 10 mm wide grooves to full depth at the junction of wall and plinth protection , at 3 metre interval and every change of direction duly filling the grooves with mixture of bitumen and sand mixed in the ratio of 1:3 by weight and top 10 mm depth to be sealed with ceiling compound grade ‘A’ complete all as specified and as directed by Engineer-in-Charge.

110

-

-

... More
Material and labour for 75 mm thick plain cement concrete 1:4:8 mix,type D2 (using 40 mm graded stone aggregates) as in subbase to floor complete all as specified and as directed by Engineer-in-Charge.

100

-

-

... More
Material and labour for Machine pressed precast concrete interlocking paver block with grey cement and pigment (glossy finish) any shape & size conforming to IS 15658-2006 of 60 mm thickness, M-35 grade etc complete all as specified and as directed by Engineer-in-Charge.

50

-

-

... More
Spreading and levelling of Sand/ grit cushioning below interlocking tiles complete all as specified and as directed by Engineer-in-Charge.

2.5

-

-

... More
Material and labour for designer rubber moulded chequerred cement concrete tiles with mixture of grey and white cemetn in equal porportions with pigments of size 300 x 300 x 22mm or 250 x 250 x 22mm thick and set and pointed in neat cement slurry in floors over a screed bed or bedding layier in CM 1:6, 15mm thick for laying floor finishes etc complete all as specified and as directed by Engineer-in-Charge.

50

-

-

... More
Material and labour for pre cast Machine pressed cement concrete 1:2:4 type B-0 (using 12.50mm graded stone aggregate) as in kerbs stones and fixing all as per manufacturer instructions etc size shall be decided and directed by GE

1

-

-

... More
Dismantling floor, hearth or wall tiling including cement mortar bedding removing serviceable tiles and rubbish off the premises etcand removal of rubbish/ demolished materials out of MD land complete all as specified and as directed by Engineer-in-Charge..

424

-

-

... More
Material and labour for Screed bed or bedding layer of mortar 20 mm thick for laying floor finishes in CM 1:6 etc: complete all as specified and as directed by Engineer-in-Charge..

250

-

-

... More
Material and labour for Rendering 10 mm thk in CM (1:4) as in backing coat of cement plaster for laying of wall tiles etc: complete all as specified and as directed by Engineer-in-Charge..

174

-

-

... More
Material and labour for Non-skid ceramic tiles (Coloured) 7 to 8mm thick rectangular area of each tiles exc 0.18 sqm n exc 0.36 sqm in floors etc,.set and jointed in neat cement slurry and pointed in white or coloured cement to match, etc complete all as specified and as directed by Engineer-in-Charge..

50

-

-

... More
Material and labour for Non-skid ceramic tiles (Coloured) 7 to 8mm thick rectangular area of each tiles exc 0.18 sqm n exc 0.36 sqm in skirting / dado etc,.set and jointed in neat cement slurry and pointed in white or coloured cement to match etc.complete all as specified and as directed by Engineer-in-Charge..

6

-

-

... More
Material and labour for vertified ceramic tiles 10mm (light shade of square/ rectangular) polished, area of each tiles not exc 0.36 sqm in floors etc,.set and jointed in neat cement slurry and pointed in white or coloured cement to match etc, complete all as specified and as directed by Engineer-in-Charge..

150

-

-

... More
Material and labour for vertified ceramic tiles 10mm (light shade of square/ rectangular) polished, area of each tiles not exc 0.36 sqm in walls skirting etc,.set and jointed in neat cement slurry and pointed in white or coloured cement to match etc.complete all as specified and as directed by Engineer-in-Charge..

18

-

-

... More
Supply and fix Non Skid (coloured) ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as specified and as directed by Engineer-in-Charge.

50

-

-

... More
Material and labour for Glazed (Coloured) ceramic tiles in vertical surfaces 300 x 450 x 8 to 9 mm/ 450 x 350 x 8 to 9 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to matchetccomplete all as specified and as directed by Engineer-in-Charge.

150

-

-

... More
Dismantling stone slabs and tiles of any description or thickness in floors aprons etc laid bedded and pointed in any mortar complete all as specified and as directed by Engineer-in-Charge.

8.3

-

-

... More
Material and labour for 20 to 25mm thick machine cut and machine polished cudappa stone slab for kitchen plateform jointed and set in CM 1:3 and fixed including rounding to edge of stone slabs one side edge etc complete all as specified and as directed by Engineer-in-Charge.

12

-

-

... More
Material and labour for machine cut granite 18 to 20 mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills,cooking platforms and like laid over & including 10mm thick bedding /backing coat in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of slab complete all as specified and as directed by Engineer-in-Charge.

15

-

-

... More
Rounding and moulding to edges of stone slabs one edge, such as in steps, cooking platform and other similar situations complete all as specified and as directed by Engineer-in-Charge.

3.5

-

-

... More
Material and labour for machine cut kota stone flooring 20-25mm thick over cement scredd base laid and jointed with gray cement slurry mixed with pigment to match the shade of the slab inclduing rubbing and polishing over screed bed of 15mm thick in cm 1:6 complete all as specified and as directed by Engr-In-Charge.

50

-

-

... More
Material and labour for machine cut kota stone as in skirting / dado 20-25mm thick over cement plster of 10mm thick base laid and jointed with gray cement slurry mixed with pigment to match the shade of the slab inclduing rubbing and polishign complete all as specified and as directed by Engr-In-Charge.

6

-

-

... More
Demolition of concrete in sunken floor incl removal of filling etc complete incl removal of demolished material to a distance complete all as specified and as directed by Engineer-in-Charge.

1

-

-

... More
Material and labour for rendering 15 mm thick on fair face of brickwork or concrete surfaces of sunken floors duly mixed with water proofing compound as per manufacturer's instructions in cement mortar 1:3 and finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge. Note : Water proofing compound shall be measured and paid separately under relevant items in this schedule.

35

-

-

... More
Material and labour for application of one coat of water based bitumen emulsion primer at the rate of 0.3 litre per SQM after cleaning of the surfaces thoroughly from dust, dirt and projections and applying water proofing treatment with APP polymeric membrane of weight 3 kilogram per SQM and minimum 3mm thick reinforced with polyster non oven fabric (weight not less than 150 gm/SQM) over that a coat of blown bitumen of 85 / 25 at the rate of 1.2 kilogram per SQM over that providing a sand layer of 25mm thick thick in sunken floors complete all as specified and as directed by Engineer-in-Charge.

35

-

-

... More
Supply only integral water proofing compound complete all as specified and as directed by Engineer-in-Charge.

8.11

-

-

... More
Material and labour for plain cement concrete, Type E2 (1:5:10) mix (Using 40 mm graded stone aggregates) for filling in sunken floor and mass concrete complete all as specified and as directed by Engineer-in-Charge.

1

-

-

... More
Dismantling / taking down PVC / Cast iron soil / waste pipes 100 mm / 75mm bore including all fitting like bends etc complete all as specified and as directed by Engineer-in-Charge.

160

-

-

... More
Supply and fix PVC (SWR) Nahani /Floor trap, 75 mm dia of out let, plain with grating including jointing to waste pipe with solvent and cement concrete type B1 (1:2:4) & including removing old trap and fixing of stainless steel grating in ground shape etc complete all as specified and as directed by Engineer-in-Charge.

4

-

-

... More
Supply and fix 75mm bore PVC (SWR) pipe single socketed(ISI Marked) any length with rubber ring joints , complete fittings etc fixed to wall fixed with MS clamps 8mm dia with two nuts wall nails etc complete all as specified and as directed by Engineer-in-Charge.

90

-

-

... More
Supply and fix 110mm bore PVC (SWR) pipe single socketed(ISI Marked) any length with rubber ring joints , complete fittings etc fixed to wall fixed with MS clamps8mm dia with two nuts wall nails etc complete all as specified and as directed by Engineer-in-Charge.

70

-

-

... More
Supply and fix 75mm bore PVC (SWR) bends any radius dimnishing pieces or tapers with access doors etc, complete all as specified and as directed by Engineer-in-Charge.

8

-

-

... More
Supply and fix 110mm bore PVC (SWR) bends any radius dimnishing pieces or tapers with access doors etc, complete all as specified and as directed by Engineer-in-Charge.

6

-

-

... More
Supply and fix 75mm bore PVC (SWR) branch piece, single (single Y ) equal or unequal with access doors etc, complete all as specified and as directed by Engineer-in-Charge.

6

-

-

... More
Supply and fix 110 mm bore PVC (SWR) junction single (single T ) equal or unequal with access doors etc, complete all as specified and as directed by Engineer-in-Charge.

6

-

-

... More
Supply and fix for 75mm bore PVC (SWR) vent cowl etc, complete all as specified and as directed by Engineer-in-Charge.

6

-

-

... More
Supply and fix for 110 mm bore PVC (SWR) vent cowl etc, complete all as specified and as directed by Engineer-in-Charge.

6

-

-

... More
Repairs to leaking bib taps, pillar taps, stop cock, angle valve, PVC connection, waste pipes, float valves, concealed stop cock, GI pipe joints, botttle traps etc of any description by changing the washers or any other minor accesssories required to make the system functional complete all as specified and as directed by Engineer-in-Charge.

100

-

-

... More
Repairs to high or low level flushing cistern by adjusting the float valve, leakages through or PVC connection / GI bend by replacing of rubber washer, cheek nuts, plunges etc to any type of flushing cistern and to make the cistern functional complete all as specified and as directed by Engineer-in-Charge.

100

-

-

... More
Supply and fix in repairs brass face spindle heavy duty for pillar cock, chromium plated stop cock, chromium plated bib cock, concealed stop cock complete all as specified and as directed by Engineer-in-Charge.

150

-

-

... More
Taking up or down steel tubing and connection, removing clear off site after credit for the same is recovered by the dept., bore of pipe 15mm complete all as specified and as directed by Engineer-in-Charge.

270

-

-

... More
Taking up or down steel tubing and connection, removing clear off site after credit for the same is recovered by the dept., bore of pipe 20mm complete all as specified and as directed by Engineer-in-Charge.

190

-

-

... More
Taking up or down steel tubing and connection, removing clear off site after credit for the same is recovered by the dept., bore of pipe 25mm complete all as specified and as directed by Engineer-in-Charge.

90

-

-

... More
Taking up or down steel tubing and connection, removing clear off site after credit for the same is recovered by the dept., bore of pipe 40mm complete all as specified and as directed by Engineer-in-Charge.

24

-

-

... More
Cutting and grooving of wall for fixing of CPVC pipe lines and after fixing of CPVC pipe line and making good of all cutting surfaces etc complete all as specified and as directed by Engineer-in-Charge.

35

-

-

... More
Supply and fix CPVC pipes, SDR 11, 20 mm outer dia of pressure rating 6kgf/sqcm conforming to IS-15778 with all CPVC fittings with such as brass elbow ,Tee, bends, unions ,sockets , male and femaleThreaded Adoptor and end pieces etc to receive fittings and fixed with solvents fixed to walls / ceiling with all clamps in Shafts/ducts with all necessary scaffolding to fix the pipes and testing the joints under prescribed pressure etc complete all as specified and as directed by Engineer-in-Charge.

185

-

-

... More
Supply and fix Tubes, ‘medium grade’ galvanised, 15 mm bore with all fitting and fixed complete to walls and ceilings or laid in floors etc complete all as specified and as directed by Engineer-in-Charge.

85

-

-

... More
Supply and fix Tubes, ‘medium grade’ galvanised, 20 mm bore with all fitting and fixed complete to walls and ceilings or laid in floors etc complete all as specified and as directed by Engineer-in-Charge.

190

-

-

... More
Supply and fix Tubes, ‘medium grade’ galvanised, 25 mm bore with all fitting and fixed complete to walls and ceilings or laid in floors etc complete all as specified and as directed by Engineer-in-Charge.

90

-

-

... More
Supply and fix GI tube medium grade of 40 mm bore with all fittings and fixed complete to walls and ceilings or laid in floors etc complete all as specified and as directed by Engineer-in-Charge.

24

-

-

... More
Supply and fix in repair for gun metal globe or gate valves with iron wheel head , screwed both ends for iron pipe & fixed of size 25 mm bore complete all as specified and as directed by Engineer-in-Charge.

2

-

-

... More
Supply and fix for 20mm gun meteal,globe or gate valves, with iron wheel head screwed both ends for iron pipe and fixed complete all as specified and as directed by Engineer-in-Charge.

2

-

-

... More
Cutting holes into or through brick/ stone walls built in cement mortar of superficial area n exc 150 Sq.cm and making good in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required complete all as specified and as directed by Engineer-in-Charge.

20

-

-

... More
Supply and fix stainles steel sink with drainage board , 1 mm thick sheet of steel grade AISI 304 for kitchen or laboratory, with plug, waste pipe, washers and wastes including bedding in cement morter to dwarf wall or including fixing CI cantilever bracket, connecting union to pipe etc., overall size 915 x 460 mm with bowl size 410 mm x 330 mm x 160 mm etc ccomplete all as specified and as directed by Engineer-in-Charge. Make : Nirali, Bule star ISI marked.

10

-

-

... More
Supply and fix in repairs stainless steel sink overall size 495mmx420mm bowl size 410mmx330mmx160mm made out of stainless steel 1 mm thick for kitchen with plugs, washers and waste pipe including bedding in cement mortar to dwarf wall, CI brackets and connecting to union / pipe complete all as specified and as directed by Engineer-in-Charge. Make : Nirali, Bule star ISI marked.

3

-

-

... More
Supply and fix in repairs stainless steel kitchen plate rack etc complete all as specified and as directed by Engineer-in-Charge. Make:Cat part no: P-348 of Prayag polymers Pvt Ltd or equivalent

10

-

-

... More
Supply and fix in repairs vitreous china water closet 'Orissa' pattern of size 580mm X 440mm, white with integral foot rest (excluding flushing cistern), but including PVC flush pipe and provision of lime concrete bedding complete all as specified and as directed by Engineer-in-Charge.

20

-

-

... More
Supply and fixin repair wash down water closet (pedestal pattern) white and including plastic water closet seat cover as per reqd colour with flat bottom and cover and mild steel chromium plated or aluminium hinging device (excluding flushing cistern ) etc complete all as specified and as directed by Engineer-in-Charge.

15

-

-

... More
Supply and fix in repairs vitreous china wash basin, white, flat back, size 580mm X 450mm including CI brackets, 32mm dia brass chromium plated waste fittings with long screwed shanks and fly nuts flanged end bedded in red lead cement and other end fixed with & including cutting for & pinning in end of brackets and 15mm bore pillar tap, cast copper alloy fancy type chromium plated, screwed down high pressure complete all as specified and as directed by Engineer-in-Charge.

4

-

-

... More
Supply and fix in Low level flushing cistern 10 ltr capacity, PVC incl waste pipe, down take pipe, pair of CI brackets and all accessories complete all as specified and as directed by Engineer-in-Charge.

30

-

-

... More
Supply and fix in repairs of PVC connection of 15mm size with PTMT nuts of length 450mm complete all as specified and as directed by Engineer-in-Charge.

30

-

-

... More
Supply and fix in repairs of PVC connection of 15mm size with PTMT nuts of length 600mm complete all as specified and as directed by Engineer-in-Charge.

50

-

-

... More
Supply and fix in repairs vitreous china urinal, half stall type, white (excluding flushing cistern, flush pipe and waste pipe) including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screw, pointing around urinal back in cement with grating and union for discharge pipe complete all as specified and as directed by Engineer-in-Charge.

5

-

-

... More
Supply and fix in repairs urinal with fixing accessories set of size 375 x 315 x 620 mm including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screw, pointing around urinal back in cement with grating and union for discharge pipe complete all as specified and as directed by Engineer-in-Charge. Make: Jaquar URS-WHT-13250 or equivalent as approved by GE

5

-

-

... More
Supply and fix in repairs water closet (pedestal pattern) coloured with combined flush tank (Cascade type) with Lid, seat cover, cistern fittings and all accessories complete all as specified and as directed by Engineer-in-Charge. MAKE: CAT No 92072 of HINDWARE (S-10/P-18) Pastel colour or equivalent in PARRYWARE/CERA as approved

4

-

-

... More
Supply and fix in repairs vitreous China wash basin with full pedestal star white of size 580 x 435 mm with 32mm dia brass chromium plated waste coupling and cast iron brackets complete all as specified and as directed by Engineer-in-Charge. MAKE: CAT No 10086 or HINDWARE or equivalent in Jaquar PARRYWARE/CERA as approved

5

-

-

... More
Supply and fix in repairs vitreous China counter top wash basin of size 600 x 450 x 190 mm with 32mm dia brass chromium plated waste coupling and cast iron brackets complete all as specified and as directed by Engineer-in-Charge. MAKE: CAT No Jaquar Code- QNS-WHT-7601AT No 10051 or equivalent in HINDWARE PARRYWARE/CERA as approved

5

-

-

... More
Material and labour for cutting of granite slab for fixing of under counter wash basin including rounded and grinding the stone with necessary arrangments complete all as specified and as directed by Engineer-in-Charge.

5

-

-

... More
Supply and fix in repairs towel ring brass chromium plated complete all as specified and as directed by Engineer-in-Charge. MAKE: CAT No F880007 or HINDWARE or equivalent in JAQUAR/ PARRYWARE/CERA as approved

5

-

-

... More
Supply and fix in repairs of brass chromium plated towel rack 600 mm long with lower hangers, brass screws and wooden/plastic cleats complete all as specified and as directed by Engineer-in-Charge. Make: CAT No F840010 or HINDWARE or equivalent in JAQUAR / PARRYWARE/CERA as approved

5

-

-

... More
Supply and fixed in repairs soap dish brass complete all as specified and as directed by Engineer-in-Charge. MAKE: CAT No F880011 of HINDWARE or equivalent model in JAQUAR/ PARRYWARE/CERA as approved by GE

5

-

-

... More
Supply and fix in repairs toilet paper holder with flap, brass chromium plated, fixed to walls with chromium plated brass screws complete all as specified and as directed by Engineer-in-Charge. Make: CAT No F880003 or HINDWARE or equivalent in JAQUAR/PARRYWARE/CERA as approved

5

-

-

... More
Supply and fix in repairs CP brass 32 mm bottle trap for wash basins / urinals with inlet and outlet screwed for pipe connections including necessary packing , union and cap and fixed complete all as specified and as directed by Engineer-in-Charge. Make :Jaguar, Code ALD 769 or equivalent as approved by GE

6

-

-

... More
Supply and fix in repairs 15mm bore brass Chromium plated wall mixer with provn for overhead shower with 115 mm long bend pipe on upper side, connecting legs & wall flanges for mixing hot and cold water, screwed down complete all as specified and as directed by Engineer-in-Charge. MAKE: F330020 of HINDWARE or equivalent in JAQUAR/ PARRYWARE/CERA as approved

10

-

-

... More
Supply and fix in repairs 15mm bore brass Chromium plated wall mixer with provn for both hand shower and overhead shower with 115 mm long bend pipe on upper side, connecting legs & wall flanges (without) hand and overhead shower for mixing hot and cold water, screwed down complete all as specified and as directed by Engineer-in-Charge. MAKE: F330022 of HINDWARE or equivalent in JAQUAR/ PARRYWARE/CERA as approved

10

-

-

... More
Supply and fix in repairs 15mm bore brass Chromium plated central hole basin mixer with out popup waste system with 450 mm long braided hoses, screwed down complete all as specified and as directed by Engineer-in-Charge. MAKE: F330014CP of HINDWARE or equivalent in Parrware/Cera.

5

-

-

... More
Supply and fix in repairs over head shower 80mm dia round shape multi flow (ABS Body chrome plated with gray face plate) with rubit cleaning system complete all as specified and as directed by Engineer-in-Charge.. MAKE: CAT No F160008 of HINDWARE or equivalent in PARRY WARE/CERA as approved

10

-

-

... More
Supply and fix in repairs 125 mm dia brass chromium plated shower rose with swivel joints with stainless steel arm duly ISI marked complete all as specified and as directed by Engineer-in-Charge.

30

-

-

... More
Supply and fix in repairs of brass chromium plated, hand shower health faucet with health facet tube of 1.2 metre long and stand etc including screwed for 15 mm bore iron pipe for two in one tap for WC complete all as specified and as directed by Engineer-in-Charge. Make: CAT No F160038 of HINDWARE or equivalent in JAQUAR/ PARRYWARE/CERA as approved

100

-

-

... More
Supply and fix in repairs 15mm dia brass chromium plated Two way Bib tap with wall flange type, fancy type, and high pressure, with flange screwed, and screwed both ends for iron pipe or for unions complete all as specified and as directed by Engineer-in-Charge. MAKE: CAT No F200004FT of HINDWARE or equivalent in JAQUAR/ PARRYWARE/CERA as approved

20

-

-

... More
Supply and fix in repairs 15mm dia brass chromium plated Bib tap with wall flange type, fancy type, and high pressure, with flange screwed, and screwed both ends for iron pipe or for unions complete all as specified and as directed by Engineer-in-Charge.. MAKE: CAT No F200004FT of HINDWARE or equivalent in PARRY WARE/CERA as approved

30

-

-

... More
Supply and fix in repairs 15 mm bore brass chromium plated Pillar cock long neck with aerator,high pressure with crutch handle, screwed down, and screwed for iron pipe or for unions complete all as specified and as directed by Engineer-in-Charge. MAKE: CAT No F330002CP of HINDWARE or equivalent in JAQUAR/ PARRYWARE/CERA as approved

10

-

-

... More
Supply and fix in repairs of 15 mm bore stop cock, brass chromium plated angle cock with wall flange type, fancy type, and high pressure, with flange screwed, and screwed both ends for iron pipe or for unions complete all as specified and as directed by Engineer-in-Charge. MAKE: CAT No F200005FT of HINDWARE or equivalent in JAQUAR/ PARRYWARE/CERA as approved

10

-

-

... More
Supply and fixed in repairs brass chromium plated concealed stop cock,regular body with adjustable wall flange screwed down, high pressure, with crutch handle, screwed both ends for 15mm dia bore iron pipe or for unions complete all as specified and as directed by Engineer-in-Charge. MAKE: CAT No F200005FT of HINDWARE or equivalent in JAQUAR/ PARRYWARE/CERA as approved

5

-

-

... More
Supply and fix in repairs CP angle cock 15mm bore fancy type chromium plated.with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed by Engineer-in-Charge.

40

-

-

... More
Supply and fix in repairs CP bib tap 15mm bore fancy type with crutch or butterfly handle, screwed for iron pipe or for unions and fixed complete all as specified and as directed by Engineer-in-Charge.

50

-

-

... More
Supply and fix in repairs Pillar taps, fancy type, chromium plated, screwed down, high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed 15 mm bore complete all as specified and as directed by Engineer-in-Charge.

10

-

-

... More
Supply and fix in repairs 600 X 450mm bevelled edge mirror, 5mm thick selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed with wooden plugs to wall with chromium plated brass screws and cup washers complete all as specified and as directed by Engineer-in-Charge.

10

-

-

... More
Supply and fixed in repairs PTMT bath room mirror cabinet of size 330x430mm complete all as specified and as directed by Engineer-in-Charge. MAKE: CAT No 551 of PRAYAG or equivalent model in POLYTUF as approved by GE

20

-

-

... More
Fixing only 9 feet pulley operted cloth drying system, aluminium anodised 22mm dia pipes(4 with connector,4 without connector), channel (Pair 1 with Double Pulley,1 with Single pulley,with mounted pulleys) 24 inch length assembly,locking system to hide ropes 4mm dia HDPE double core & fitting materials pouch consists of Easy lock assembly 4 nos,channel mounting screws (38x8mm self tapping) 8 nos, Rope end cap 4nos,pipe end cap 8 nos.Rawl plug 12 nos etc, complete all as specified and as directed MAKE: Easy dry or equivalent model and make as approved by GE

650

-

-

... More
Supply and fix in repairs Towel Rail, 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats . (Minimum weight 190gms) complete all as specified and as directed by Engineer-in-Charge.

10

-

-

... More
Supply and fixed in repairs 15 mm dia bib tap of standard PTMT of any colour screwed for iron pipe minimum weight 90 grams complete all as specified and as directed by Engineer-in-Charge.

150

-

-

... More
Supply and fixed in repairs 15 mm dia Stop valve of standard PTMT of any colour screwed for iron pipe minimum weight 90 grams complete all as specified and as directed by Engineer-in-Charge.

20

-

-

... More
Supply and fixed in repairs 15 mm dia Angle Stop valve of standard PTMT of any colour screwed for iron pipe minimum weight 90 grams complete all as specified and as directed by Engineer-in-Charge.

40

-

-

... More
Supply and fixed in repairs 15 mm dia Pillar tap fancy type of standard PTMT of any colour screwed for iron pipe minimum weight 120 grams complete all as specified and as directed by Engineer-in-Charge.

10

-

-

... More
Supply and fix in repairs 15 mm bore swivel shower of PTMT any colour minimum weight 40 grams complete all as specified and as directed by Engineer-in-Charge.

10

-

-

... More
Supply and fix in repairs 32 mm dia waste fittings, brass chromium plated for wash basins with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and as directed by Engineer-in-Charge.

20

-

-

... More
Supply and fix in repairs 40 mm dia waste fittings, brass chromium plated for sink with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and as directed by Engineer-in-Charge.

20

-

-

... More
Supply and fix 40 mm bore low density polyethylene pipes (LDPE) of pressure rating 6kgf/cm2 fixed to wall ceiling or in floors etc.complete all as specified and as directed by Engineer-in-Charge.

50

-

-

... More
Supply and fixed in repairs PVC waste pipe 32/40 mm dia fixed to WHB / Kitchen Sink complete all as specified and as directed by Engineer-in-Charge.

300

-

-

... More
Supply and fix in repairs 125mm dia chromium plated grating for nahani traps with or without hole for waste pipe complete all as specified and as directed by Engineer-in-Charge.

200

-

-

... More
Supply and fix in repair CP corner glass 12mm thick with brass bracket screws etc complete all as specified and as directed by Engineer-in-Charge.

80

-

-

... More
Cleaning of PVC water tank capacity n exc 500 litres at any height ( on accessible/inaccessible roofs) by removing all scale, dirt, mud ,any foreign material and removing accumulated silt, other dirty substance, algae, fungus and other bacterial material from sides/bottom of tank by draining / pumping out water/sludge from bottom and other growth from wall/ floor by high pressure cleaning method with jet set, vaccum machine and again cleaning the tank with fresh water and disinfecting the tank Disinfecting by using UV radiator and approved chemical (chloriten). for following capacities of tanks complete all as specified and as directed by Engineer-in-Charge. Note:- (i) Unit rate quoted shall include for necessary ladder and machinery for pressure cleaning and safety apparatus required for execution of work. (ii) Unit rate quoted shall include for writing the date of actual cleaning with white paint on black background to match with the existing.

300

-

-

... More
ditto- all as item No-183 above but of capacity exc 501 ltrs but n exc 1000 litres complete all as specified and as directed by Engineer-in-Charge.

250

-

-

... More
S/F in repair Ball valve of size 15mm dia high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed complete all as specified and as directed by Engineer-in-Charge. Make:- PRAYAG / SYMET).

20

-

-

... More
-ditto- all as item No-185 above but of size 20 mm dia complete all as specified and as directed by Engineer-in-Charge.

200

-

-

... More
-ditto- all as item No-185 above but of size 25 mm dia complete all as specified and as directed by Engineer-in-Charge.

20

-

-

... More
Supply and fixed in repairs 1000 litres capacity rotational moulded polyethylene water storage tank of triple layer type(cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I complete all as specified and as directed by Engineer-in-Charge.

5

-

-

... More
Supply and fixed in repairs 500 litres capacity rotational moulded polyethylene water storage tank of triple layer type(cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I complete all as specified and as directed by Engineer-in-Charge.

5

-

-

... More
Supply and Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 50 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete all as specified and as directed by Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

36

-

-

... More
Supply and fix Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and as directed by Engineer-in-Charge. Note: stainless steel butt hinges and necessary S S screws shall be paid separately

12.16

-

-

... More
Supply and fix PVC solid ventilator frame size 55 X 47mm with wall thickness of 5mm made out of extruded 5mm PVC sheet, mitre cut at two comers and jointed with 2 Nos of 150mm long brackets of 15 x 15mm MS square tube the two vatted profiles are to be reinforced with 19 x 19mm MS squre tube the 50% of bottom portion is fixed with 4mm pin headed glass and balance 50% of top portion is fixed with 4mm thick pin headed glass lowers and cover with 0.36mm dia stainless steel wire mesh at top portion including necessary PVC beading with screws and 3 Nos 12mm dia MS guard, bars fixed in ventilator frame including two coats of synthetic enamel paint over a coat of red oxide primer to MS guard bars etc complete all as specified and as directed by Engineer-in-Charge. Make SINTEX or epuivalent seetings in RAJSHRI , NANDI make as approved by accepting officer

10

-

-



Evaluation Notes How It Works ?

Potential Partner

Select Your Requirements

Past Bidders
This list is curated from the bidders of the similar tenders in the past

Unlock the Tender details for free
  • Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
  • Awarded Ratexx%
  • Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
  • Awarded Ratexx%
  • Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
  • Awarded Ratexx%
Disclaimer: BidAssist has made every reasonable effort to ensure that the information is accurate and authentic however it cannot be held liable for any third-party claims or losses of any damages. BidAssist makes no warranty, expressed or implied, as to the results obtained from the use of the information. If you think you may have noticed any error or omission, please let us know by contacting contact@bidassist.com.