Military Engineer Services Tender

Comprehensive maintenance and repair of fully automatically operated passenger lift (Make - OTIS Ltd) Passenger cum goods Elevator type Electrical traction frieght of (2000 Kgs capacity) to with single speed motor and AC variable voltage frequency (VVVF) control, automatic levelling device to bring car to exact landing level, simplex automatic with or without attendant including power operated side opening MS painted sliding door with powder coated finish and indicators at each floor complete all as specified and as directed. Note : (Tenderer Shall be responsible for the following) (a) M/s Excel Ltd or its authorised dealer will perform the maintenance. (b) All responsible steps to maintain the equipment in proper operating condition. (c) Contractor shall use trained and appropriately supervised personnel to perform the maintenance services. (d) Services shall be conducted during normal working hours and shall sent at regular intervals as frequently as the company thinks necessary, having regard to the age, complaint, nature and condition and problem in operation of the elevator.

(e) Technician should be of the M/s Excel Ltd or rep/approved by the M/s Excel Ltd to systematically inspect, adjust and lubricate the parts of the elevator to the extent necessary to maintain the elevator in satisfactory working order. (f) During the breakdown/failure in the elevator, a technician may reasonably be responsible to carry out the necessary repairs in order to restore the elevator to satisfactory working condition. (g) Responsible to replace (identical or equivalent item) or rectify at its option any component of the elevator rendered defective due to normal wear and tear and arising out of ordinary and reasonable use of the elevator. (h) The rate quoted by the tenderer is inclusive of the credit of old unserviceable retrived materials obtained from as per Schedule 'A'. (j) Major spare parts will be measured and paid under relevant items of Schedule 'A' . (k) Comprehensive maintenance shall have to be carried out on bi monthly basis.

Note : Recovery Schedule (a) Delay in making the lift serviceable for minor complaints more than 24 hrs after lodging the complaint through telephone/telegram @ Rs. 500/- per day (b) Delay in making the lift serviceable for major complaints more than the time fixed by the accepting office @ Rs. 1000/- per day (c) Any material required for making the lift serviceable shall be deemed to be included in the rate quoted.however certain major items requ ired for functioning of the serviceblity of the lift shall be measured under relevet itemns from ser no 5 to 6 (d) Serviceability certificate to be submitted by the contractor on completion of two months for a span of 8 months duration duly by M/s Excel Ltd rep or equivalent approved by M/s Excel Ltd.

Comprehensive maintenance and repair of fully automatically operated passenger lift (Make - KONE ELEVATORS) Passenger Elevator type Electrical traction frieght of 6 passengers (408 Kgs capacity) to serve 3 floors (G + 2) with single speed motor and AC variable voltage frequency (VVVF) control, automatic levelling device to bring car to exact landing level, simplex automatic with or without attendant including power operated side opening MS painted sliding door with powder coated finish and indicators at each floor complete all as specified and as directed. Note : (Tenderer Shall be responsible for the following) (a) KONE Elevators India Pvt Ltd or its authorised dealer will perform the maintenance,necessary AMC with the OEM should be submitted to this office (b) All responsible steps to maintain the equipment in proper operating condition. (c) Contractor shall use trained and appropriately supervised personnel to perform the maintenance services. (d) Services shall be conducted during normal working hours and shall sent at regular intervals as frequently as the company thinks necessary, having regard to the age, complaint, nature and condition and problem in operation of the elevator.

(e) Technician should be of the KONE or rep/approved by the KONE to systematically inspect, adjust and lubricate the parts of the elevator to the extent necessary to maintain the elevator in satisfactory working order. (f) During the breakdown/failure in the elevator, a technician may reasonably be responsible to carry out the necessary repairs in order to restore the elevator to satisfactory working condition. (g) Responsible to replace (identical or equivalent item) or rectify at its option any component of the elevator rendered defective due to normal wear and tear and arising out of ordinary and reasonable use of the elevator. (h) The rate quoted by the tenderer is inclusive of the credit of old unserviceable retrived materials obtained from as per Schedule 'A' (j) Major spare parts will be measured and paid under relevant items of Schedule 'A' . (k) Comprehensive maintenance shall have to be carried out on bi monthly basis.

Note : Recovery Schedule (a) Delay in making the lift serviceable for minor complaints more than 24 hrs after lodging the complaint through telephone/telegram @ Rs. 500/- per day (b) Delay in making the lift serviceable for major complaints more than the time fixed by the accepting office @ Rs. 1000/- per day (c) Any material required for making the lift serviceable shall be deemed to be included in the rate quoted. (d) Serviceability certificate to be submitted by the contractor on completion of two months for a span of 8 months duration duly by KONE elevator rep or equivalent approved by KONE.

Comprehensive maintenance and repair of fully automatically operated passenger lift (Make - ESCON goods Elevator type Electrical traction frieght of 2000 Kgs capacity) to serve 3 floors (G + 2) with single speed motor and AC variable voltage frequency (VVVF) control, automatic levelling device to bring car to exact landing level, simplex automatic with or without attendant including power operated side opening MS painted sliding door with powder coated finish and indicators at each floor complete all as specified and as directed. Note : (Tenderer Shall be responsible for the following) (a) KONE Elevators India Pvt Ltd or its authorised dealer will perform the maintenance. (b) All responsible steps to maintain the equipment in proper operating condition. (c) Contractor shall use trained and appropriately supervised personnel to perform the maintenance services. (d) Services shall be conducted during normal working hours and shall sent at regular intervals as frequently as the company thinks necessary, having regard to the age, complaint, nature and condition and problem in operation of the elevator.

(e) Technician should be of the KONE or rep/approved by the KONE to systematically inspect, adjust and lubricate the parts of the elevator to the extent necessary to maintain the elevator in satisfactory working order. (f) During the breakdown/failure in the elevator, a technician may reasonably be responsible to carry out the necessary repairs in order to restore the elevator to satisfactory working condition. (g) Responsible to replace (identical or equivalent item) or rectify at its option any component of the elevator rendered defective due to normal wear and tear and arising out of ordinary and reasonable use of the elevator. (h) The rate quoted by the tenderer is inclusive of the credit of old unserviceable retrived materials obtained from as per Schedule 'A' (j) Major spare parts will be measured and paid under relevant items of Schedule 'A' . (k) Comprehensive maintenance shall have to be carried out on bi monthly basis.

Note : Recovery Schedule (a) Delay in making the lift serviceable for minor complaints more than 24 hrs after lodging the complaint through telephone/telegram @ Rs. 500/- per day (b) Delay in making the lift serviceable for major complaints more than the time fixed by the accepting office @ Rs. 1000/- per day (c) Any material required for making the lift serviceable shall be deemed to be included in the rate quoted. (d) Serviceability certificate to be submitted by the contractor on completion of two months for a span of 8 months duration duly by KONE elevator rep or equivalent approved by KONE.

Repair / maintenance and alingned of Complete leveling sensor unit suitable for two panel telescopic auto door complete all as specified and as directed.

M&L Battery operated siren in case of emergency including necessry control wiring complete all as specified and as directed.

M&L Car door adjustments and contact replacements suitable for two panel telescopic auto door complete all as specified and as directed.

M&L Landing door adjustments and contact replacement suitable for two panel telescopic auto door complete all as specified and as directed.

Supply only Power Supply Card 220 V

Supply only Transformer 220V/9V

Supply only Transformer 440V/135V

Supply only Power Supply Card 110V

Supply only UP/DN & IL Relay Card

Supply only Car Operative Button Set with all accessories (For Lift car & Floor button)

Supply only Landing Push button Set

Supply only Gate Relay assembly set

Supply only Gate bush for Lift Gate.

S&F Car header set including taking down old unserviceable set all as specified and directed by engr in charge. Note: Set includes motor,drive,belt,coupler,rollers etc complete with necessary hardware items complete all as specified and as directed.

Landing header set including taking down old unserviceable set all as specified and directed by engr in charge. Note : Rollers,door lock contacts,rope of 4mm complete including necessary hardware items.

M&L for Gear oil (Synthetic mineral oil) 140 grade complete all as specified and as directed.

S&F No/NC Limit switches including taking down old unserviceable set complete all as specified and as directed.

M&L for Main gear box wheel with 520mm dia and 3 groove complete all as specified and as directed.

Replacement of Car door Contact Lock for two panel telescopic auto door as per existing specification and fixed including Taking down old Unserviceable Car door Contact Lock, complete all as specified and as directed.

Supply & fixing in replacement of Battery 12 Volt 12 AH for existing ARD of SRE Building lift complete all as specified and as directed. Make : EXIDE / AMARON.

M&L for scraping of old paint at lift room gear box, mounting channels, pulleys etc completely and Preparing Old Treated surfaces and applying two Coats of Black/ Red colour DUCO paint over a coat of red oxide primer , entire steel metallic surface of Lift , lift Cabin, landing doors cleaning/ polishing by using suitable cleaning/polishing agents for entire Lift complete all as specified and as directed.

S&F Elevator door detector (Infrared sensor) of capacity 188/988 A-AC 220 Volt in both side of door with one No power controller of capacity DC24 VIA or AC 120 VIA fix in existing position including taking down old unserviceable door detector suitable for two panel telescopic auto door at SRE Building complete all as specified and as directed.

Dismantling the existing induction motor capacity 12.5 HP taking out burnout short circuiting winding and rewound in suitable gauge copper coil necessary insulation materials for packing materials including applying the insulation varnish testing and fitment of its original position and including suitable electrical connections to be carried out and fitment of its original position complete all as specified and as directed.

M&L for Sub Main wiring with two runs of 1.5 sq mm 1100 V grade (nominal area) single core PVC insulated unsheathed cable multi-stranded copper conductor drawn through medium grade, rigid non-metallic PVC conduit / casing & caping (as per site requirement) of suitable sizewith all necessary fittings, surface in walls/roof/floor duly earthed with one run of single core cable of same size but green in colour as continuous earthing wire and connecting to common earth dolly incl taking down old sub main wiring any type any size complete all as specified and as directed. Note : - (i) Necessary PVC dummy plates & PVC rigid junction boxes for identifying junction as required on site/directed by Engr-in-charge shall deemed to be included in the quoted rate. (ii) The wiring shall be done strictly by following proper colour coding using red, yellow and blue for phase, black for neutral and green for earth leads. (iii) Three runs of cable and one run of PVC conduit / casing caping will be measured as one unit.

M&L for Sub Main wiring with teo runs of 2.5 sq mm 1100 V grade (nominal area) single core PVC insulated unsheathed cable multi-stranded copper conductor drawn through medium grade, rigid non-metallic PVC conduit / casing & caping (as per site requirement) of suitable sizewith all necessary fittings, surface in walls/roof/floor duly earthed with one run of single core cable of same size but green in colour as continuous earthing wire and connecting to common earth dolly incl taking down old sub main wiring any type any size complete all as specified and as directed. Note:- (i) Necessary PVC dummy plates & PVC rigid junction boxes for identifying junction as required on site/directed by Engr-in-charge shall deemed to be included in the quoted rate. (ii) The wiring shall be done strictly by following proper colour coding using red, yellow and blue for phase, black for neutral and green for earth leads. (iii) Three runs of cable and one run of PVC conduit / casing caping will be measured as one unit.

M&L for Hand rail (Stainless Steel) set of 3ft length including angles,nuts and bolts etc complete all as specified and as directed.

Supply & fix Air Circulator fan 230 volts single phase oscillating 200 mm sweep suitable for lift car cabin ceiling mounting complete all as specified and as directed.

S&F MCCB 4 Pole, 415 V, , Adjustable type, 250 Amps with breaking capacity 36 KA, 415Volts 3-phase supply complete all as specified and as directed.

S&F Fix MCB SPN 16-32 Amps 10 KA rupturing capacity complete all as specified and as directed.

S&F Fix MCB SP 06-32 Amps 10 KA rupturing capacity complete all as specified and as directed.

S&F of MCCB DB 8 way triple pole vertical type 415 volts 50 Hz AC supply including suitable provision for 4 pole MCCB incomer, fixed to the existing wall (concealed) and making good the disturbed surface wall with the exsting wall complete all as specified and as directed.

Supply and fixing round shape 6 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders,LED lamp suitable for lift car cabin ceiling mounting including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.