Indian Oil Corporation Limited Tender

For getting the details of etenders, if you are looking for information about them from the cumbersome government websites but are tired of doing so, Bidassist comes up with a one stop solution. It collates every Eproc telangana tender on Bidassist. One can approach it for the bidding process, registration process, etc., are explained below.

Indian Oil Corporation Limited - IOCL Tender

Works

Telecommunication Services

Eprocure

Jagitial, Telangana

Opening Date5 Sep 2020

Closing Date18 Sep 2020

Tender AmountRefer Documents

Notes

Download

Costs

EMD
₹ 4,63,000
Document Cost
Refer Documents
Tender Fee
Refer Documents

Summary

Composite Work Of Cgs Ip And Rt At Jagtial Ga Group F

Description

Unlock the Tender details for free

Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user

Contact

Tender Id
2020_PLHO_122680_6
Bid Award Id
View
Tender No
PLCGD/Works/20/22
Tender Authority
Indian Oil Corporation Limited View
Purchaser Address
-
Website
http://https://www.iocl.com/

Unlock the Tender details for free

GEM & Bid Advisory Services

Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost

Request Call Back

Documents

Download All

Tender Notice-1602.5 kBTendernotice_1.pdf

BOQ-1645.1 kBBOQ_133259.xls

BOQ GROUP F

Corrigendum-1705.9 kBCorrigendum1.pdf

Document-828.5 MBTechnicalPART3.pdf

TECHNICAL TENDER PART 3

Document-724.6 MBTechnicalPART2.pdf

TECHNICAL TENDER PART 2

6 More

Report Missing Document

BOQ Items

DO_NOT_SHOW

Quantity-

Rate-

Amount -

View all details for FREE

Receiving and taking over of all Owner supplied materials from Owner's designated place(s) of issue, transportation including loading, unloading, handling from Owner's designated place(s) of issue to Contractor's own stock yard(s) / work site(s) / work shop(s) including arranging all necessary intermediate storage area(s) thereof, as required; supply of all materials (except those specified subsequently in SOR), equipment, consumables as defined in Contractor's scope of supply and their transportation to the work site(s); performing all above ground piping fabrication works including cutting, edge preparation (inclusive of grinding the edges of pipes, fittings, flanges etc. to match with the matching edges of uneven / different thickness wherever required), fit up, bending, pre-heating wherever required, welding, threading etc.; erection of pipes of all types and thickness over sleepers, overhead on racks and at all elevations; hook-up with equipment nozzles; all types of inline and online instruments such as pressure / thermal safety valves (other than those covered separately), fittings of all sizes i.e. elbows, reducers, tees, 'o' lets, flanges, blind flanges, spectacle blinds, tapping's for pressure gauges, thermowells, hoses and hose couplings of all sizes, if applicable, vents and drains required for process and hydrotesting purposes etc. including fixing of all types of gaskets (including gaskets for RTJ flanges), bolts, studs and nuts of all sizes; carrying out non-destructive testing (excluding radiography covered subsequently in SOR) such as magnetic particle/ liquid penetration etc. as required; hook-up with existing piping / pipeline installed by others as per drawings wherever required; cleaning and flushing by water / compressed air, carrying out hydrostatic test, pneumatic test, valve functional test and any other type of testing as specified, de-pressurising, dewatering, drying by compressed air if applicable; cutting / rebeveling (as required), pre-commissioning and providing commissioning assistance to Commissioning Contractor / Agency for process piping and commissioning of non-process piping if applicable; clean-up and restoration of site, preparation of as built drawings, documents and project records; transportation of surplus free issue materials to Owner's designated place(s); completing all works in all respects as per the AFC drawings, specifications, standards and other provisions of Contract and instruction of Engineer-in-Charge. Note :- a) All butt welded fittings end shall generally match with connecting pipe wall thickness. However, in case of misalignment, contractor shall have to do end preparation accordingly without any extra cost. b) All couplings, nipples, plugs for nipple etc. as required shall be supplied by contractor without any extra cost. c) Supply and Installation and all forms of NDT like UT, DPT as required of Pipes, Valves, fittings & flanges of size 2" & below is covered under this item. d) Any branch connection taken from mainline shall be considered under this SOR item only. e) Painting of pipe flange, fittings, valves, for all auxilary items suitable for normal corrosive as per specification is considered under this item. Bidder to quote accordingly No extra cost shall be paid for the above items.

Quantity-

Rate-

Amount -

Installation of above ground Carbon Steel Process Piping as per details given below:

Quantity-

Rate-

Amount -

Size - 10.0 Inch, Thk/Sch - 6.4 mm , Material - API 5L Gr. X-52 PSL 2, (CHARPY), BE, ERW/Seamless

Quantity27

Rate-

Amount -

Size - 8.0 Inch, Thk/Sch - 6.4 mm , Material - API 5L Gr. X-52 PSL 2, (CHARPY), BE, ERW/Seamless

Quantity21

Rate-

Amount -

Size - 4.0 Inch, Thk/Sch - Material - ASTM A106 GR. B SCH. XS, CHRPY, SEAMLESS, ASME B36.10

Quantity48

Rate-

Amount -

Tie in & Hook up

Quantity-

Rate-

Amount -

Carrying out tieing-in and hook-up of the station piping with existing Mainline including all excavation/ trenching in all kinds of soil including rock,transportation of coated pipe from owner's stackyard, cutting of pipe, pre-testing of pipe sections before hook-up, making field bends out of pre-tested pipes to match the site requirement, welding, carrying out 100% radiography, field joint coating, holiday detection, repair of damaged coating, backfilling and making through the pipeline etc. complete in all respects as per specifications and directions of Engineer-in-Charge. NOTE: This item is optional and to be operated under specific instructions from Engineer-Incharge.

Quantity-

Rate-

Amount -

10"

Quantity1

Rate-

Amount -

Quantity1

Rate-

Amount -

INSTALLATION OF VALVES

Quantity-

Rate-

Amount -

Receiving and taking over of all Owner supplied materials, equipment's from Owner's designated place(s) of issue, loading , unloading, handling from Owner's designated place(s) of issue to Contractor's own stock yard(s)/ work site(s)/ work shop(s) including arranging all necessary intermediate storage area(s) thereof, as required; supply of all materials, equipment, consumables as defined in Contractor's scope of supply and its transportation to the work site(s);installation of valves, flow meters, strainers, equipment's including fixing of gaskets, bolts, studs, nuts wherever required, levelling, aligning, installation and assembly of accessories including accessories for actuators including making electrical connections for such actuators, if any, by bolting/ threading or welding of pipes at all elevations, testing, completing all works in all respects as per drawings, specification, other provisions of Contract and directions of the Engineer-in-Charge.

Quantity-

Rate-

Amount -

Installation of above ground Butt Welded Actuated Valves (MOV / Pneumatic) as per details given below:

Quantity-

Rate-

Amount -

Size - 10 Inch, Rating - 300#

Quantity2

Rate-

Amount -

Installation of above ground Flanged Valves (Ball / Plug / Check / Gate / Globe) as per details given below:

Quantity-

Rate-

Amount -

Size - 10.0 Inch, Rating - 300#

Quantity3

Rate-

Amount -

Size - 4.0 Inch, Rating - 300#

Quantity5

Rate-

Amount -

Size - 8.0 Inch, Rating - 300#

Quantity3

Rate-

Amount -

Installation of above ground Butt Welded Valves (Ball / Plug / Check / Gate / Globe) as per details given below:

Quantity-

Rate-

Amount -

Supply including procurement, testing and transportation to worksite(s)/workshop(s) including loading, unloading and handling for the following materials to be supplied by Contractor as per the requirement of PMS, specifications, data-sheets, standards, instructions of Owner/ Engineer- in-Charge and other provisions of Contract.

Quantity-

Rate-

Amount -

SUPPLY OF PIPES

Quantity-

Rate-

Amount -

Supply of above ground Carbon Steel Process Piping as per details given below

Quantity-

Rate-

Amount -

Size - 10.0 Inch, Thk/Sch - 6.4 mm , Material - API 5L GR.X 52/60 PSL 2, (CHARPY) BE, SEAMLESS

Quantity27

Rate-

Amount -

Size - 8.0 Inch, Thk/Sch - 6.4 mm , Material - API 5L GR.X 52/60 PSL 2, (CHARPY) BE, SEAMLESS

Quantity21

Rate-

Amount -

Size - 4.0 Inch, Thk/Sch - STD, Material - ASTM A106 GR. B SCH. XS, CHRPY, SEAMLESS, ASME B36.10

Quantity21

Rate-

Amount -

Size - 4.0 Inch, Thk/Sch - XS, Material - ASTM A 333 GR.6,BE SEAMLESS SCH. XS, CHRPY, SEAMLESS, ASME B36.10

Quantity27

Rate-

Amount -

FLANGES Supply of Weld Neck Raised Face (WNRF) Flanges as per details below:

Quantity-

Rate-

Amount -

Size - 10.0 Inch, 300# , Thk/Sch - 6.4 mm, Material - ASTM A105 (Charpy), Face/Finish - RF/125AARH , Dimn. Std. - ASME B16.6

Quantity7

Rate-

Amount -

Size - 8.0 Inch, 300# , Thk/Sch - 6.4 mm, Material - ASTM A105 (Charpy), Face/Finish - RF/125AARH , Dimn. Std. - ASME B16.5

Quantity3

Rate-

Amount -

FLANGE, 4",B-16.5 ASTM A 694 F 52 #300, RF/125AARH

Quantity7

Rate-

Amount -

FLANGE, 4",B-16.5 ASTM A 350 GR.LF2 #300, RF/125AARH

Quantity3

Rate-

Amount -

Supply of Blind Flanges as per details below:

Quantity-

Rate-

Amount -

Size - 4.0 Inch, 300# , Thk/Sch - 6.4 mm , Material - ASTM A105 (Charpy), Face/Finish - RF/125AARH , Dimn. Std. - ASME B16.5

Quantity3

Rate-

Amount -

Supply of Fig 8 (Spectacle Blind) as per details given below:

Quantity-

Rate-

Amount -

Size - 8.0 Inch, 300#, Material - ASTM A105 (Charpy), Face/Finish - RF/125AARH , Dimn. Std. - ASME B16.48

Quantity3

Rate-

Amount -

Size - 4.0 Inch, 300#, Material - ASTM A105 (Charpy), Face/Finish - RF/125AARH , Dimn. Std. - ASME B16.48

Quantity3

Rate-

Amount -

Size - 4 Inch, 300#, Material - ASTM A350 GR.LF2, Face/Finish - RF/125AARH , Dimn. Std. - ASME B16.48

Quantity2

Rate-

Amount -

FITTINGS

Quantity-

Rate-

Amount -

Supply of R=1.5D 90o BW Elbow as per details given below:

Quantity-

Rate-

Amount -

Size - 10.0 Inch, 300# ,Thk/Sch - 6.4 mm, Material - ASTM A234 GR.WPB (Charpy) Dimn. Std. - ASME B 16.10

Quantity3

Rate-

Amount -

Size - 8.0 Inch, 300# ,Thk/Sch - 6.4 mm, Material - ASTM A234 GR.WPB (Charpy) Dimn. Std. - ASME B 16.9

Quantity3

Rate-

Amount -

Size - 4.0 Inch, 300# ,Thk/Sch - 6.4 mm, Material - ASTM A234 GR.WPB (Charpy) Dimn. Std. - ASME B 16.9

Quantity3

Rate-

Amount -

Supply of R=1.5D 45o BW Elbow as per details given below:

Quantity-

Rate-

Amount -

Size - 10.0 Inch, 300# ,Thk/Sch - 6.4 mm, Material - ASTM A234 GR.WPB (Charpy) Dimn. Std. - ASME B 16.10

Quantity2

Rate-

Amount -

Size - 8.0 Inch, 300# ,Thk/Sch - 6.4 mm, Material - ASTM A234 GR.WPB (Charpy) Dimn. Std. - ASME B 16.9

Quantity2

Rate-

Amount -

Size - 4.0 Inch, 300# ,Thk/Sch - 6.4 mm, Material - ASTM A234 GR.WPB (Charpy) Dimn. Std. - ASME B 16.9

Quantity1

Rate-

Amount -

Supply of BW Equal Tee as per details given below:

Quantity-

Rate-

Amount -

Size -4.0 Inch,300#, Thk/Sch - 6.4 mm , Material - ASTM A234 GR.WPB, Dimn. Std. - ASME B 16.9

Quantity3

Rate-

Amount -

Supply of BW Equal Barred Tee as per details given below:

Quantity-

Rate-

Amount -

Supply of BW Un-equal Tee as per details given below:

Quantity-

Rate-

Amount -

Size -10.0 Inch x 8.0 Inch,300#, Thk/Sch - 6.4 mm x 6.4 mm , Material - ASTM A234 GR.WPB, Dimn. Std. - ASME B 16.7

Quantity3

Rate-

Amount -

Size -8.0 Inch x 4.0 Inch,300#, Thk/Sch - 6.4 mm x 6.4 mm , Material - ASTM A234 GR.WPB, Dimn. Std. - ASME B 16.9

Quantity3

Rate-

Amount -

Supply of Weldolet conforming to MSS-SP-97, Material - ASTM A105 (CHARPY) and as per details given below:

Quantity-

Rate-

Amount -

Supply of CONCENTRIC Reducer

Quantity-

Rate-

Amount -

Insulating Joints as per tender specs, Rating 300 #

Quantity-

Rate-

Amount -

10", Insulating Joint, 300#

Quantity2

Rate-

Amount -

Bolts & Gaskets

Quantity-

Rate-

Amount -

Supply of Bolts as per details given below:

Quantity-

Rate-

Amount -

Size -10.0 Inch,300#, Material- Bolt: ASTM A193 GR.B7 Nut: ASTM A194 GR.2H, Dimn. Std. - ASME B 16.10

Quantity21

Rate-

Amount -

Size -8.0 Inch,300#, Material- Bolt: ASTM A193 GR.B7 Nut: ASTM A194 GR.2H, Dimn. Std. - ASME B 16.9

Quantity21

Rate-

Amount -

Size -4.0 Inch,300#, Material- Bolt: ASTM A193 GR.B7 Nut: ASTM A194 GR.2H, Dimn. Std. - ASME B 16.9

Quantity21

Rate-

Amount -

Supply of Gaskets as per details given below:

Quantity-

Rate-

Amount -

Size - 10.0 inch, 300#

Quantity3

Rate-

Amount -

Size - 8.0 inch, 300#

Quantity7

Rate-

Amount -

Size - 4.0 inch, 300#

Quantity7

Rate-

Amount -

RADIOGRAPHY:

Quantity-

Rate-

Amount -

Performance of radiographic inspection of piping of all types, sizes, thickness including providing or hiring of all necessary equipment, supply of all consumables including radiographic films and whatever else even though not expressly mentioned but required to perform the work as per specification and instructions of Engineer-in-Charge. Contractor to submit DPR, Inspection Report along with Radiography Report to Engineer-in-Charge. Note : a) All NDT including Radiography, MPT, LPT for 2" and below are covered under this SOR item. No separate payment shall be made. Radiography of piping joints as per details given below:

Quantity-

Rate-

Amount -

Size - 10.0 Inch

Quantity11

Rate-

Amount -

Size - 8.0 Inch

Quantity21

Rate-

Amount -

Size - 4.0 Inch

Quantity27

Rate-

Amount -

PIPE SUPPORTS, CROSS-OVERS PLATFORMS AND GRATINGS

Quantity-

Rate-

Amount -

Supply, fabrication and erection of pipe/ equipment supports (for all sizes/ thickness) including shoes, pipes etc. as required, cradles, turn buckles, T-posts for all types of guides, anchors, special supports for cold/hot insulated pipes etc. if applicable, all necessary equipment, consumables, labour etc. for completing all works including supply of bolts, nuts, washers, U-clamps, wooden blocks etc. as required for supporting, supply and application of paints and primers suitable for normal corrosive painting environment as defined in contract document and as per standard specification for painting specification no. VPC-SS-PI-0008, Drawings, Specification, Standards, other provisions of Contract and instruction of Engineer-in-Charge.

Quantity-

Rate-

Amount -

MS Structural Steel

Quantity1

Rate-

Amount -

PIPING LEAKS / BURSTS (ATTRIBUTABLE TO OWNER)

Quantity-

Rate-

Amount -

Supply of Firefighting Equipment

Quantity-

Rate-

Amount -

9 kg capacity DCP fire extinguisher

Quantity6

Rate-

Amount -

4.5 kg capacity DCP fire extinguisher

Quantity1

Rate-

Amount -

2 kg capacity CO2 fire extinguisher (portable)

Quantity1

Rate-

Amount -

4.5 kg capacity CO2 fire extinguisher (portable)

Quantity3

Rate-

Amount -

4 Nos. Sand Buckets with stand & canopy

Quantity5

Rate-

Amount -

Wind Socks

Quantity1

Rate-

Amount -

SUPPLY OF RAIN CAP

Quantity-

Rate-

Amount -

Supply and Installation of Rain Cap including all necessary fabrication works, including providing all necessary equipment's, labour, materials, consumables and inputs other than Owner supplied materials and performing all works as per drawings, data sheet, specifications enclosed with the Contract and directions of Engineer-in-Charge.

Quantity-

Rate-

Amount -

2" Rain Cap for Vent.

Quantity2

Rate-

Amount -

Supply of Nitrogen with cylinder for localized purging, Hook up of pipeline and piping.

Quantity32

Rate-

Amount -

CIVIL WORKS

Quantity-

Rate-

Amount -

Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth up to 50m lead and lift up to 1.5 m, as directed by the Engineer-in-Charge :All kinds of soil

Quantity3675

Rate-

Amount -

Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead up to 50 m and lift up to 1.5 m, as directed by the Engineer-in-Charge. All kinds of soil

Quantity1959

Rate-

Amount -

Earth work in excavation by mechanical means (Hydraulic Excavator)/ Manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead up to 50 m and lift up to 1.5 m, as directed by the Engineer-in-Charge :Ordinary rock

Quantity11

Rate-

Amount -

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

Quantity861

Rate-

Amount -

Extra for every additional lift of 1.5 m or part thereof in excavation/ banking excavated or stacked materials: All kinds of soil

Quantity284

Rate-

Amount -

Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.

Quantity263

Rate-

Amount -

Supplying chemical emulsion in sealed containers including delivery as specified. Chlorpyriphos/ Lindane emulsifiable concentrate of 20%

Quantity210

Rate-

Amount -

Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) : Along external wall where the apron is not provided using chemical emulsion @ 7.5 litres/ sqm of the vertical surface of the substructure to a depth of 300 mm including excavation channel along the wall & rodding etc. complete: With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration

Quantity79

Rate-

Amount -

Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 : 2 (1 cement : 2 Coarse sand) to match the existing floor : With Chlorpyriphos/Lindane E.C. 20% with 1% concentration

Quantity11

Rate-

Amount -

Treatment of existing masonry using chemical emulsion @ 1 litre per hole at 300 mm interval including drilling holes at 45 degree and plugging them with cement mortar 1:2 (1 cement : 2 coarse sand) to the full depth of the hole : With Chlorpyriphos/Lindane E.C. 20% with 1% concentration

Quantity11

Rate-

Amount -

Filling with available fly ash and earth (excluding rock) in trenches or embankment in layers (each layer should not exceed 15 cm), with intermediate layer of compacted earth (Soil density of 98%) after every four layers of compacted depth of fly ash, sides & top layer of filling shall be done with earth having total minimum compacted thickness 30 cm or as decided by Engineer -in-charge, including compacting each layer by rolling/ ramming and watering, all complete as per drawing and direction of the Engineer-in-Charge.

Quantity11

Rate-

Amount -

Filling the excavated earth to required grade, level & profile in low lying areas including watering, ramming, compacting at optimum moisture content to 90% of Proctor's density consolidation by rolling with 8 to 10 tonne power rollerin layers not exceeding 20 cm thickness, including clearing the area by cutting of shrubs, bushes, grass, vegetation, debris etc. stacking and disposing out of plot area to an unobjectional area as directed by site Engineercomplete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and direction of Site Engineer.

Quantity814

Rate-

Amount -

Supplying and filling selected earth/ moorum (excluding black cotton soil) from Contractor's own borrow areas including royalty, with all leads and lifts in low laying areas and filling to required grade and level including watering, compacting at optimum moisture content to 90% of Proctor's density, consolidation androlling with 8 to 10 tonne power rollerin layers not exceeding 20 cm thickness, complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and direction of Site Engineer.

Quantity3957

Rate-

Amount -

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (Zone-III) : 4 graded stone aggregate 20 mm nominal size)

Quantity3

Rate-

Amount -

Providing and laying in position Plain cement concrete of specified grade excluding the cost of centring and shuttering - All work up to plinth level: 1:3:6 (1 cement : 3 coarse sand (Zone-III) : 6 graded stone aggregate 20 mm nominal size)

Quantity3

Rate-

Amount -

Providing and laying in position Plain cement concrete of specified grade excluding the cost of centring and shuttering - All work up to plinth level: 1:4:8 (1 cement : 4 coarse sand (Zone-III) : 8 graded stone aggregate 40 mm nominal size)

Quantity217

Rate-

Amount -

Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75 mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.

Quantity174

Rate-

Amount -

Providing and laying cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 10 mm down size) mixed with approved brand of water proofing compound @ 1Kg/50 Kg bag of cement, in roof grading, coping, in bed concrete etc. at allheights & depths, including providing centering and shuttering, scaffolding, watering, curing, vibrating, etc. complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and direction of the Site Engineer.

Quantity27

Rate-

Amount -

Providing and laying 40 mm thick CC 1:2:4 Damp Proof Course with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone chips 6 mm down size) laid to proper level & line including providing shuttering, applying two coats of bitumen applied @ 1.50 Kg/sqm and spreading an even layer of coarse sand over hot bitumen, etc. complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and direction of the Site Engineer.

Quantity174

Rate-

Amount -

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (Zone-III): 3 graded stone aggregate 20 mm nominal size)

Quantity161

Rate-

Amount -

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centring, shuttering, finishing and reinforcement - All work up to plinth level: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Quantity21

Rate-

Amount -

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand (Zone-III) : 3 graded stone aggregate 20 mm nominal size)

Quantity45

Rate-

Amount -

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15 Degree landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand (Zone-III) : 3 graded stone aggregate 20 mm nominal size)

Quantity21

Rate-

Amount -

Centering and shuttering including strutting, propping etc. and removal of form for all heights : Foundations, footings, bases of columns, etc. for mass concrete

Quantity3171

Rate-

Amount -

Centering and shuttering including strutting, propping etc. and removal of form for all heights : Suspended floors, roofs, landings, balconies and access platform

Quantity641

Rate-

Amount -

Centering and shuttering including strutting, propping etc. and removal of form for all heights : Lintels, beams, plinth beams, girders, bressumers and cantilevers

Quantity635

Rate-

Amount -

Centering and shuttering including strutting, propping etc. and removal of form for all heights : Columns, Pillars, Piers, Abutments, Posts and Struts

Quantity768

Rate-

Amount -

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more

Quantity59850

Rate-

Amount -

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500 D or more

Quantity31500

Rate-

Amount -

Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer-in-Charge. (Note : Cement content considered in this item is @ 330 kg/cum. Excess/ less cement used as per design mix is payable/ recoverable separately). All works upto plinth level

Quantity603

Rate-

Amount -

DESIGN MIX CONCRETE : Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centring, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer-in-Charge. (Note: Cement content considered in this item is @ 330 kg/cum. Excess/ less cement used as per design mix is payable/ recoverable separately). All works above plinth level upto floor V level

Quantity84

Rate-

Amount -

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in : Cement mortar 1:6 (1 cement : 6 coarse sand)

Quantity158

Rate-

Amount -

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand)

Quantity315

Rate-

Amount -

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level : Cement mortar 1:4 (1 cement :4 coarse sand)

Quantity174

Rate-

Amount -

Extra for providing and placing in position 2 Nos. 6mm dia. M.S. bars at every third course of half brick masonry.

Quantity37

Rate-

Amount -

Brick work with non modular fly ash bricks conforming to IS:12894, class designation 10 average compressive strength in super structure above plinth level up to floor V level in : Cement mortar 1:6 (1 cement : 6 Coarse sand)

Quantity3

Rate-

Amount -

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. : Granite of any colour and shade : Area of slab up to 0.50 sqm

Quantity5

Rate-

Amount -

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building, all complete as per the architectural drawings, with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand), laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade, including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. : Polished granite stone slab- Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.

Quantity11

Rate-

Amount -

Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS:4454 (Part-1) and M.S. top cover of required thickness for rolling shutters. 80 x 1.25 mm M.S. laths with 1.25 mm thick top cover

Quantity21

Rate-

Amount -

Providing and fixing ball bearing for rolling shutters.

Quantity1

Rate-

Amount -

Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick M.S. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ M.S. sheet box by means of 3.3 mm dia round headed screws, one lock at the corners. Clamp shall be made of 12 mm dia. M.S. bar bent to shape as per standard drawing.

Quantity5

Rate-

Amount -

Supplying, fabricating, erecting, placing and fixing in position M.S. structural works using rolled/ built up sections for truss, claddings, bracings, purlins, supporting frames made of joists, tubes, pipes, channels, angles, plates, flats, bars etc. including cutting to required size welding of joints, fixing anchor plates, including bolts, theading, nuts, washers, sleeves etc. includingpreparation of detailed fabrication drawings & submission to the Engineer-in-Charge for approval before start of fabrication, supplying & applying painting with two coats of epoxy paint "EPILUX 155 High Build Enamel over a coat of "EPILUX 610" Primer of M/s BERGER or any other approved equivalent make as per manufacturer’s recommendation, complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and directions of the Engineer-in-Charge. (Excluding the cost of concrete work).

Quantity16

Rate-

Amount -

Supplying and fixing, shop fabricated M.S. steel Electroforged Welded Gratings (Hot dip galvanised as per IS:2629 and tested as per IS:2633 and IS:6745) of approved make with quantity of zinc coating shall not be less than 9.0 N/sqm of surface area (0.12 mm uniform thickness) over drains, stair treads etc., wherever required with maximum size of void/ mesh in the grating limited to 33 mm x 50 mm including welding/ fixing/ clamping to base frame, etc. complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and directions of the Engineer-in-Charge.

Quantity1

Rate-

Amount -

Supplying, fitting and fixing hot dip galvinised barbed line wire through holes in fencing posts (already made in the body of the post), tightening and fixing the wire in tight condition with straining bolts (straining bolts at end post) including the cost of cutting and lapping joints, making holes, straining bolts, galvanised staples, binding wires etc. complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and direction of the Engineer-in-Charge.

Quantity983

Rate-

Amount -

Supplying, fitting and fixing punched tape concertina spiral coil of 50 turns per coil having core wire of 2.6 mm diameter made of high carbon spring steel of high tensile strength as per IS:4454 (Part-I, Grade-II) having minimum galvanising coating thickness equivalent to 230 grams per square metre and low carbon steel strip of 0.5 mm thickness having a series of barbes punched all along the length on both sides of the strip at regular interval as per IS:513, DD quality having minimum galvanising coating thickness of 12 microns. Hardness of tape should be between 137-180 VPN (Victor Penetration Number). The coil should be clipped sufficiently at regular intervals. The coil should not be stretched for more than 6.0 m length and the minimum diameter of the coil in the closed condition should not be less than 600 mm complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and directions of the Engineer-in-Charge.

Quantity246

Rate-

Amount -

Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding, and joints filled with acid and/or alkali resisting cement as per IS:4457, complete as per the direction of Engineer-in-Charge. In flooring on a bed of 10 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand) a)Acid and alkali resistant tile

Quantity42

Rate-

Amount -

Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding, and joints filled with acid and/or alkali resisting cement as per IS:4457, complete as per the direction of Engineer-in-Charge. In dado/ skirting on 12 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand) a)Acid and alkali resistant tile

Quantity105

Rate-

Amount -

Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : a)25 mm thick

Quantity32

Rate-

Amount -

Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.

Quantity32

Rate-

Amount -

Providing and fixing first quality ceramic glazed wall tiles conforming to IS:15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by the Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 Kg/sq.m., including pointing in white cement mixed with pigment of matching shade complete.

Quantity158

Rate-

Amount -

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of first quality conforming to IS:15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 Kg/sq.m. including pointing the joints with white cement and matching pigment, etc. complete.

Quantity32

Rate-

Amount -

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 Kg/sq.m. including grouting the joints with white cement and matching pigments etc., complete. a)Size of Tile 600x600 mm

Quantity126

Rate-

Amount -

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to IS:15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 Kg/sq.m. including grouting the joint with white cement & matching pigments etc. complete. a)Size of Tile 600x600 mm

Quantity32

Rate-

Amount -

Supplying and laying flat brick soling in foundation trench, in floors, garages, sumps, etc., with bricks of class designation 50 laid to proper slope, level and grade etc. filling of the joints with sand etc. complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and direction of the Site Engineer.

Quantity21

Rate-

Amount -

Providing and laying 52 mm thick cement concrete flooring with metallic hardner, under layer of 37 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer of 15 mm thick metallic concrete hardner consisting of mix 1:2 (1 cement : 2 stone aggregate 6 mm nominal size) by volume with which metallic hardening compound such as IRONITE NO. 1 of IRONITE CO. OF INDIA LTD. or aproved equivalent mixed in the ratio 4:1 (4 parts of cement : 1 part of metallic floor hardening compound of approval quality) by weight, inclusive of cost of finishing, labour, material, equipment, etc. as per specifications and directions of the Engineer-in-Charge.

Quantity11

Rate-

Amount -

Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : a)In 75x75 mm deep chase

Quantity69

Rate-

Amount -

Making Khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x 1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.

Quantity5

Rate-

Amount -

Providing and fixing on wall face Unplasticised Rigid PVC (UPVC) rainwater pipes conforming to IS:13592 Type-A, including jointing with seal ring conforming to IS:5382, leaving 10 mm gap for thermal expansion: (i) Single socketed pipes : a)110 mm diameter

Quantity105

Rate-

Amount -

Providing and fixing on wall face Unplasticised-PVC (UPVC) moulded fittings/ accessories for Un-plasticised Rigid PVC rainwater pipes conforming to IS:13592 Type A, including jointing with seal ring conforming to IS:5382, leaving 10 mm gap for thermal expansion : Coupler : a)110 mm

Quantity16

Rate-

Amount -

Quantity16

Rate-

Amount -

Quantity16

Rate-

Amount -

Quantity16

Rate-

Amount -

Providing and fixing LUXALON 75C & 225C un-perforated Aluminium panel coloured ceiling manufactured by M/s. HUNTER DOUGLAS INDIA or any other approved equivalent brand, each panel consisting of 75/225 mm wide x 15.5 mm deep and 0.5 mm thick with bevel edged panel made from enamelled corrosion resistance aluminium alloy AA-5050 (Al.Mg), each panel to abut each other with a narrow 'V' groove, clipping with a baked enamelled aluminium panel carrier of 32 mm wide x 39 mm deep x 0.95 mm thick in standard length of 5 metres made of double baked enamelled aluminium alloy AA-5050 (Al.Mg) black with cutouts to hold the panels in a module of 75 mm closed at a distance of 1.25 metre, each panel carrier suspended by means of G.I. suspension rod 4 mm diameter and a galvanised supsension spring clip at a distance of 1.7 metre centre to centre, making openings for light fittings etc. with suitable peimeter framing all complete as per manufacturer's recommendation and directions of the Engineer-in-Charge. (Note: Measurement shall be made wall to wall without any deduction for openings, for payment purpose).

Quantity105

Rate-

Amount -

FINISHING Note: Rates for external plaster are for height up to 10m from ground level unless & otherwise stated. CEMENT PLASTER (IN FINE SAND): 15 mm cement plaster on the rough side of single or half brick wall of mix : 1:6 (1 cement : 6 fine sand)

Quantity1895

Rate-

Amount -

FINISHING Note: Rates for external plaster are for height up to 10m from ground level unless & otherwise stated. CEMENT PLASTER IN TWO COATS: 6 mm cement plaster of mix : a)1:3 (1 cement : 3 fine sand)

Quantity788

Rate-

Amount -

INTERIOR FINISHING: Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : Water thinnable cement primer

Quantity1050

Rate-

Amount -

EXTERIOR FINISHING: Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm

Quantity1575

Rate-

Amount -

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Quantity1011

Rate-

Amount -

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. Two coats

Quantity2625

Rate-

Amount -

Painting with synthetic enamel paint, having VOC (Volatile Organic Compound) content less than 150 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. Two coats

Quantity11

Rate-

Amount -

Providing grooves of uniform size 12x12 mm and up to 15x15 mm in plaster as per approved pattern using wooden battens, nail to the under layer including removal of wooden battens repair to the edges of panels and finishing the groove complete as per directions of the Engineer-in-Charge.

Quantity53

Rate-

Amount -

Providing & fixing galvanized chicken wire net 20 Gauge, 20 mm mesh size in plastering work at the junction of RCC Columns/ Beams & brickwork as directed by the Engineer-in-Charge.

Quantity336

Rate-

Amount -

Providing and laying Burnt Terracota Tiles 12 mm thick for facia, over walls, sloping RCC Roofs etc. at all levels and locations laid over and including a backing coat of 15 mm thick cement mortar (1 cement : 3 sand) and joints filled with coloured cement of same colour as tiles complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per specifications and directions of the Engineer-in-Charge.

Quantity11

Rate-

Amount -

Providing and fixing 12 mm thick Elevational Brick Tiles for facia, vertical face of walls, etc. at all levels and locations laid over and including a backing coat of 15 mm thick cement mortar (1 cement : 3 sand) and joints filled with coloured cement of same colour as tiles complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per specification and directions of the Engineer-in-Charge.

Quantity11

Rate-

Amount -

Preparation and consolidation of sub-grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earth with lead up to 50 metres.

Quantity525

Rate-

Amount -

Supplying and stacking at site : 90 mm to 45 mm size stone aggregate

Quantity53

Rate-

Amount -

Supplying and stacking at site : 53 mm to 22.4 mm size stone aggregate

Quantity40

Rate-

Amount -

Supplying and stacking at site : Stone screening 13.2 mm nominal size (Type A)

Quantity8

Rate-

Amount -

Supplying and stacking at site :Stone screening 11.2 mm nominal size (Type B)

Quantity8

Rate-

Amount -

Laying, spreading and compacting stone aggregate of specified sizes to WBM specifications in uniform thickness, hand picking, rolling with 3 wheeled road/ vibratory roller 8-10 tonne capacity in stages to proper grade and camber, applying and brooming requisite type of screening/ binding material to fill up interstices of coarse aggregate, watering and compacting to the required density.

Quantity84

Rate-

Amount -

Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size) in pavements, laid to required slope and camber in panels as required including consolidation finishing and tamping complete.

Quantity6

Rate-

Amount -

Providing and laying design mix cement concrete of M-30 grade in roads/ taxi tracks/ runways, using cement content as per design mix, using coarse sand and graded stone aggregate of 40 mm nominal size in appropriate proportions as per approved & specified design criteria, providing dowel bars with sleeve/ tie bars wherever required, laying at site, spreading and compacting mechanically by using needle and surface vibrators, levelling to required slope/ camber, finishing with required texture, including steel form work with sturdy M.S. channel sections, curing, making provision for contraction/ expansion, construction & longitudinal joints (10 mm wide x 50 mm deep) by groove cutting machine, providing and filling joints with approved joint filler and sealants, complete all as per direction of the Engineer-in-Charge. [Notes: (1) Item of joint fillers, sealants, dowel bars with sleeve/ tie bars to be paid separately. (2) Cement content considered in M-30 is @ 340 kg/cum. Excess/ less cement used as per design mix is payable/ recoverable separately]. Cement concrete prepared with batch mixing machine

Quantity86

Rate-

Amount -

Providing and fixing in position pre-moulded joint filler in expansion joints.

Quantity525

Rate-

Amount -

Providing and applying 2.5 mm thick road marking strips (retro-reflective) of specified shade/ colour using hot thermoplastic material by fully/ semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of the Engineer-in-Charge and accordance with applicable specifications.

Quantity16

Rate-

Amount -

Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of the Engineer-in-Charge.

Quantity315

Rate-

Amount -

Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of the Engineer-in-Charge. Made of G.I. wire of dia. 4 mm, PVC coated to achieve outer dia not less than 5 mm in required colour and shade.

Quantity133

Rate-

Amount -

Providing and laying factory made chamfered edge Cement Concrete paver blocks In foot path, park & lawns driveway or light & traffic parking etc. of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of course sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, all complete as per manufacturer's specifications & direction of the Engineer-in-Charge. 60mm thick Cement Concrete paver block of M-35 grade with approved colour, design & pattern.

Quantity11

Rate-

Amount -

Supplying & fixing in position pre-cast cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate) kerb stone of size 450 mm high, 150 mm average thick & 600 mm long, each stone joined with 12 mm thick cement mortar 1:3 (1 cement : 3 coarse sand)over a base of cement mortar, including excavation, bed concrete 300 wide & 100 thick in cement concrete 1:3:6 concrete, painting of exposd surfaces etc. complete in all respects inclusive of cost of all materials, labour, tools, tackles etc. as per specifications and direction of Site Engineer.

Quantity263

Rate-

Amount -

Supplying and fixing Road Hump of minimum size 350 mm width x 50 mm thick made of Carbon Black mixed Rubber with Additive of LDPE for reinforcement & UV resistant colouring agent of black & yellow colour with 4 reflective glass beads, of weight not less than 16 Kg/metre, and capacity to withstand minimum 35 tonne weight (moving vehicle load) including cleaning the road surface of all dirt, scales, oil, grease and foreign material etc. and fixing the hump on the Road top as per manufactures specifications with necessary fasteners complete in all respects inclusive of cost of all labour, materials, fasteners, tools, tackles etc. as per specification and direction of the Engineer-in-Charge.

Quantity7

Rate-

Amount -

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid.

Quantity3

Rate-

Amount -

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm C.P. brass pillar tap

Quantity5

Rate-

Amount -

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete : Flexible Pipe : 32 mm diameter

Quantity5

Rate-

Amount -

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Quantity5

Rate-

Amount -

Providing and fixing toilet paper holder : C.P. Brass (Ref. Make: JAQUAR, Model: Cat. No.-1151 or approved equivalent).

Quantity5

Rate-

Amount -

Re-painting sand cast iron/ centrifugally cast iron (spun) iron, soil, waste, vent pipes and fittings with one coat of synthetic enamel paint of any colour such as chocolate, grey or buff, etc. : 75 mm diameter pipe

Quantity11

Rate-

Amount -

Providing and fixing Polyethelene-Aluminium-Polyethelene (PE-AL-PE) Composite Pressure Pipes conforming to IS-15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing. This includes testing of joints complete as per direction of the Engineer-in-Charge. 2025 (25 mm OD) pipe

Quantity11

Rate-

Amount -

Quantity11

Rate-

Amount -

C.P.V.C. PIPES: Internal Work - Exposed on wall : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of the Engineer-In-Charge. 15 mm nominal outer dia pipes

Quantity11

Rate-

Amount -

Quantity11

Rate-

Amount -

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of the Engineer-In-Charge. 15 mm nominal outer dia pipes

Quantity53

Rate-

Amount -

Quantity32

Rate-

Amount -

EXTERNAL WORK Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of the Engineer-In-Charge. 150 mm nominal outer dia pipes

Quantity53

Rate-

Amount -

BRASS FITTING Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 25 mm nominal bore

Quantity5

Rate-

Amount -

BRASS FITTING Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 32 mm nominal bore

Quantity5

Rate-

Amount -

Providing and placing on terrace (at all floor levels) polyethylene water storage tank (Ref. Make: SINTEX or approved equivalent), IS:12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. Circular Tank

Quantity1050

Rate-

Amount -

Quantity1050

Rate-

Amount -

Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 15 mm nominal bore

Quantity3

Rate-

Amount -

Providing and fixing 15mm diameter C.P. brass tap as per following with C.P. brass flange including cutting & making good the walls wherever required, etc. complete in all respects inclusive of cost of all materials, labour, tools, tackles etc. as per specifications and directions of the Engineer-in-Charge. : Bib Cock (Ref. Make: JAQUAR, Model: Cat. No. 0021 or approved equivelent)

Quantity3

Rate-

Amount -

Providing and fixing 15mm diameter C.P. brass angle valve as per following with C.P. copper connecting pipe 375mm long or as required including nuts, washers, C.P. brass flange, etc. including cutting & making good the walls wherever required, etc. complete in all respects inclusive of cost of all materials, labour, tools, tackles etc. as per specifications and directions of the Engineer-in-Charge. Angle Valve (Ref. Make: JAQUAR, Model: Cat. No. 0053 or approved equivalent)

Quantity5

Rate-

Amount -

Providing and fixing 15mm diameter C.P. brass stop cock with wall flange (Ref. Make: JAQUAR, Model: Cat. No. 0933 or approved equivalent), male end with C.P. copper connecting pipe 375mm long or as required including nuts, washers, C.P. brass flange etc. including cutting & making good the walls wherever required complete in all respects inclusive of cost of all materials, labour, tools, tackles etc. as per specifications and directions of the Engineer-in-Charge.

Quantity5

Rate-

Amount -

Providing & fixing Angle Valve(Ref. Make: JAQUAR, Model: Cat. No. 563 or approved equivalent) and Health Faucet with flexible tube 8mm diameter x 1.5 m long (Ref. Make: JAQUAR, Model: Cat. No. 549 or approved equivalent).

Quantity5

Rate-

Amount -

Providing and fixing the following washroom fittings, complete in all respects; inclusive of cost of all materials, labour, tools, tackles etc. as per specifications and directions of the Engineer-in-Charge. : Stainless steel liquid soap container (spring loaded push type) with lid and brackets fixed to P.V.C. cleats with C.P. brass screws, etc.

Quantity3

Rate-

Amount -

Providing and fixing the following washroom fittings, complete in all respects; inclusive of cost of all materials, labour, tools, tackles etc. as per specifications and directions of the Engineer-in-Charge. : C.P. brass double coat hook (Ref. Make: JAQUAR, Model: Cat. No. 1161 or approved equivalent).

Quantity3

Rate-

Amount -

Providing, laying and jointing glazed stoneware pipes Class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 150 mm diameter

Quantity16

Rate-

Amount -

Quantity16

Rate-

Amount -

Quantity16

Rate-

Amount -

Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design : 100x100 mm size P-type : With common burnt clay F.P.S. (Non-modular) bricks of class designation 7.5

Quantity5

Rate-

Amount -

Providing and laying non-pressure NP-2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : 150 mm dia. R.C.C. pipe

Quantity6

Rate-

Amount -

Quantity11

Rate-

Amount -

Quantity21

Rate-

Amount -

Quantity11

Rate-

Amount -

Quantity11

Rate-

Amount -

Quantity6

Rate-

Amount -

Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 Kg and weight of frame 15 Kg), R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 coarse sand (Zone-III) : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design : Inside dimensions 455x610 mm and 45 cm deep for single pipeline : With common burnt clay F.P.S. (Non-modular) bricks of class designation 7.5

Quantity1

Rate-

Amount -

Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. : With common burnt clay F.P.S. (Non-modular) bricks of class designation 7.5

Quantity1

Rate-

Amount -

Constructing brick masonry Septic Tank with brickwork in cement mortar 1:6 including R.C.C. 1:2:4 (1 cement : 2 sand : 4 graded coarse aggregate) top slab, C.I. cover all as per standard drawing, etc. complete in all respects inclusive of cost of all materials, labour, tools, tackles etc. as per drawings, specifications and directions of the Engineer-in-Charge. For 10 Users

Quantity1

Rate-

Amount -

Constructing percolation pit of size 3.0m diameter and 2.0m deep, filled with 40 mm size brick ballast including providing suitable pre-cast RCC covers with lifting lugs, laying of 150mm diameter x 5.0m long U.P.V.C. pipe embedded in pit/ outlet pipe all complete as per specification and directions of the Engineer-in-Charge.

Quantity1

Rate-

Amount -

Providing and fixing self cleaning S.C.I. heavy quality Floor/ Nahani trap with 100mm diameter inlet and 100mm diameter outlet, 125mm C.P. brass grating (heavy type) with or without vent arm including cost of cutting and making good the walls and floors, jointing with lead caulked joints, connecting with waste water pipe etc. complete in all respects inclusive of cost of all materials, labour, tools, tackles etc. as per drawings, specifications and directions of the Engineer-in-Charge.

Quantity5

Rate-

Amount -

Providing and fixing 32mm diameter (Nominal Bore) brass ball valve of approved quality complete with high pressure copper floats, complete in all respects inclusive of cost of all materials, labour, tools, tackles, etc. complete as per specifications and directions of the Engineer-in-Charge.

Quantity1

Rate-

Amount -

Construction of second class brick masonary open surface drain (Size: 200mm wide & 200mm average depth) in cement mortar 1:4 laid over a bed of 150mm thick cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) including making haunches and providing 15mm thick cement plaster in CM 1:4 (1 cement : 4 coarse sand) with a floating coat of neat cement inside and its top and exposed surfaces, including excavatioin, disposal of the surplus earth up to any lead and lift as per standard design and drawing, complete in all respects inclusive of cost of all labour, materials, carriages, excavation and refilling, curing etc., as per specifications of the Engineer-in-Charge.

Quantity11

Rate-

Amount -

Constructing Brick Masonary catch pit in cement mortar 1:4 (1 cement : 4 coarse sand) including necessary excavation, 200mm thick foundation concrete 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm size) and inside and top plastering (15mm thick) with cement mortar 1:4 (1 cement : 4 coarse sand) finished with a floating coat of neat cement making necessary connections to drains inclusive ofall labour, material, equipment, etc., all complete as per drawing and directions of the Engineer-in-Charge. 750mm x 750mm x depth up to 1000mm inner dimensions

Quantity1

Rate-

Amount -

Quantity1

Rate-

Amount -

Boring, providing and installation bored cast-in-situ reinforced cement concrete piles of grade M-25 of specified diameter and length below the pile cap, to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring with bentonite solution and temporary casing of appropriate length for setting out and removal of same and the length of the pile to be embedded in the pile cap etc. by percussion drilling using Direct mud circulation (DMC) or Bailer and chisel technique by tripod and mechanical Winch Machine all complete, including removal of excavated earth with all its lifts and leads [Notes: (1) Length of pile for payment shall be measured up to bottom of pile cap. (2) Truck Mounted rotary/ TMR/ Tubewell boring machine shall not be used] : 450 mm diameter piles

Quantity105

Rate-

Amount -

Vertical load testing of piles in accordance with IS:2911 (Part-IV) including installation of loading platform by Kentledge/ Anchor piles method and preparation of pile head or construction of test cap and dismantling of test cap after test etc. complete as per specification & the direction of the Engineer-In-Charge. [Notes : (1) Initial and Routine Load Test shall not be carried out by Dynamic method of testing. (2) Testing agency shall submitt the design of loading platform for the approval of the Engineer-In-Charge.] : Single pile up to 50 tonne Safe Capacity : Initial Test (Test Load 2.5 times the Safe Capacity)

Quantity2

Rate-

Amount -

Vertical load testing of piles in accordance with IS:2911 (Part-IV) including installation of loading platform by Kentledge/ Anchor piles method and preparation of pile head or construction of test cap and dismantling of test cap after test etc. complete as per specification & the direction of the Engineer-In-Charge. [Notes : (1) Initial and Routine Load Test shall not be carried out by Dynamic method of testing. (2) Testing agency shall submitt the design of loading platform for the approval of the Engineer-In-Charge.] : Single pile up to 50 tonne Safe Capacity : Routine Test (Test Load 1.5 times the Safe Capacity)

Quantity2

Rate-

Amount -

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of the Engineer-In-Charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion : Powder coated aluminium (Minimum thickness of powder coating 50 micron)

Quantity6

Rate-

Amount -

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of the Engineer-In-Charge. (Glazing, paneling and dash fasteners to be paid for separately) : For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required. (Fittings shall be paid for separately) : Powder coated aluminium (Minimum thickness of powder coating 50 micron)

Quantity53

Rate-

Amount -

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/ neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-In-Charge. (Cost of aluminium snap beading shall be paid in basic item) : With float glass panes of 5.50 mm thickness

Quantity63

Rate-

Amount -

Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS:6315, having brand logo embossed on the body/ plate with double spring mechanism and door weight up to 125 Kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-In-Charge. : With stainless steel cover plate minimum 1.25 mm thickness

Quantity1

Rate-

Amount -

Providing and fixing aluminium tubular handle bar 32 mm outer dia, 3.0 mm thick & 2100 mm long with SS screws etc .complete as per direction of the Engineer-In-Charge. Powder coated (Minimum thickness 50 micron) aluminium tubular handle bar

Quantity21

Rate-

Amount -

Providing and fixing 100 mm brass locks (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete.

Quantity11

Rate-

Amount -

Providing and fixing aluminium casement windows fastener of required length for aluminium windows with necessary screws etc. complete. Powder coated (Minimum thickness 50 micron) Aluminium

Quantity11

Rate-

Amount -

Providing and fixing aluminium round shape handle of outer diameter 100 mm with SS screws etc. complete as per direction of the Engineer-In-Charge. Powder coated (Minimum thickness 50 micron) Aluminium

Quantity1

Rate-

Amount -

Providing and fixing, on fixed glazing/ doors/ window panes, sun control film "HP NATURAL 35 SAFETY COMBINATION FILM-4Mil" of M/s. GARWARE or approved equivalent make and shade, all complete as per manufacturer's specification and as per instructions of the Engineer-in-Charge.

Quantity21

Rate-

Amount -

Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer, 3 mm thick water proofing membrane, black finished reinforced with non-woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufacture of density at 25°C, 0.87-0.89 kg/ litre and viscocity 70-160 cps. Over the primer coat the layer of membrane shall be laid using Butane Torch and sealing all joints etc, and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : (a) Joint strength in longitudinal and transverse direction at 23°C as 650/450N/5cm. (b) Tear strength in longitudinal and transverse direction as 300/250N. (c) Softening point of membrane not less than 150°C. (d) Cold flexibility shall be up to -2°C when tested in accordance with ASTM, D-5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane : 3 mm thick

Quantity126

Rate-

Amount -

Supplying and using water proofing compound like CICO, PUDDLE or any other approved brand with Cement Plaster/ CC/ RCC complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and direction of the Site Engineer.

Quantity158

Rate-

Amount -

Boring/ drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS:2800 (Part-I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipment, tools, plants & machineries required for the job, all complete as per direction of the Engineer-In-Charge, up to 90 metre depth below ground level. All types of soil : 300 mm diameter

Quantity84

Rate-

Amount -

Quantity11

Rate-

Amount -

Boring/ drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS:2800 (Part-I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, beyond 90 metre & up to 150 metre depth below ground level. All types of soil : 300 mm diameter

Quantity105

Rate-

Amount -

Boring/ drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS:2800 (Part-I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, beyond 90 metre & up to 150 metre depth below ground level. Rocky strata including boulders : 300 mm diameter

Quantity6

Rate-

Amount -

Supplying, assembling, lowering and fixing in vertical position in bore well, Un-plasticized PVC medium well casing (CM) pipe of required dia, conforming to IS:12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of the Engineer-In-Charge. 150 mm nominal size diameter

Quantity105

Rate-

Amount -

Supplying, assembling, lowering and fixing in vertical position in bore well Un-plasticized P.V.C. medium well screen (RMS) pipes with ribs, conforming to IS:12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of the Engineer-In-Charge. 150 mm nominal size diameter

Quantity27

Rate-

Amount -

Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of the Engineer-In-Charge.

Quantity5

Rate-

Amount -

Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of the Engineer-In-Charge.

Quantity137

Rate-

Amount -

Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of the Engineer-In-Charge.

Quantity16

Rate-

Amount -

Gravel packing in tubewell construction in accordance with IS:4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of the Engineer-In-Charge.

Quantity3

Rate-

Amount -

Providing and fixing factory made precast RCC perforated drain covers, having concrete of strength not less than M-25, of size 1000x450x50 mm, reinforced with 8 mm dia four nos longitudinal & 9 nos. cross sectional T.M.T. hoop bars, including providing 50 mm dia perforations @ 100 to 125 mm c/c, including providing edge binding with M.S. flats of size 50 mm x 1.6 mm complete, all as per direction of the Engineer-In-Charge.

Quantity210

Rate-

Amount -

Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel screwed and socketed/ plain ended casing pipes of required dia, conforming to IS:4270, of reputed & approved make, including painted with outside surface with two coats of anticorrosive paint of approved brand and manufacture, including required hire & labour charges, fittings & accessories, all complete, for all depths, as per direction of the Engineer-In-Charge. 150 mm nominal size dia having minimum wall thickness 5.00 mm

Quantity27

Rate-

Amount -

Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 plain slotted (having slot of size 1.6/ 3.2 mm) mild steel threaded and socketed/ plain bevel ended pipe (type A) of required dia, conforming to IS:8110, of reputed and approved make, having wall thickness not less than 5.40 mm, including painted with outside surface with two coats of anticorrosive bitumestic paint of approved brand and manufacture, including hire & labour charges, fittings & accessories, all complete, for all depths, as per direction of the Engineer-In-Charge. 150 mm nominal size diameter

Quantity21

Rate-

Amount -

Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of : 150 mm diameter

Quantity1

Rate-

Amount -

Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS:2800 (Part-I), including necessary bolts & nuts of required size complete. : 150 mm clamp

Quantity1

Rate-

Amount -

Providing and fixing Bail plug/ Bottom plug of required diameter to the bottom of pipe assembly of tubewell as per IS:2800 (Part-I). : 150 mm diameter

Quantity1

Rate-

Amount -

Supplying, providing, installation, testing & commissioning of sub-mersible pump-cum-motor of approved make capable of delivering 300 Litre Per Minute (LPM) to required head with starter, wiring from starter to motor and incoming feeder to starter including pipe with all attachment complete in all respects inclusive of cost of all labour, materials, tools, tackles, etc. as per drawings, specifications and directions of the Engineer-in-Charge. 7.5 HP

Quantity1

Rate-

Amount -

Supplying and filling good earth for lawns & in plantation area, in layers not exceeding 20 cm depth in one operation including removal of debris/ un-wanted material, consolidation, dressing, levelling and watering etc. complete as per direction of the Site Engineer/ Engineer-in-Charge. (Note : Volume of earth to be calculated for the payment shall be the volume of stacked earth after reduction by 20%).

Quantity231

Rate-

Amount -

Supply, stacking and mixing sludge manure with earth in required proportion and spreading sludge manure in lawn inclusive of charges of all duties, royalty, cost of carriage etc. up to any distance. (Note: Sludge/ manure to be measured in stacks and will be reduced by 8% for payment).

Quantity32

Rate-

Amount -

Supply, stacking and mixing Cow Dung/ Neem oil cake/ Agro meal with earth in required proportion and spreading the mixture in lawn and or filling in specified areas inclusive of charges of all duties, royalty, cost of carriage etc. up to any distance. (Note: Cow Dung/ Neem oil cake/ Agro meal/ Manure shall be measured in stacks and will be reduced by 8% for payment).

Quantity32

Rate-

Amount -

Grassing with approved quality doob grass in rows of 7.5 cm apart in either direction, in lawns etc. including watering and maintenance of the lawn for 30 days or more till grass forms a thick free from weeds and fit for mowing including supply and filling good earth, if required, during maintenance period (Note: The good earth shall be paid separately under relevant item).

Quantity27

Rate-

Amount -

Digging holes and refilling the earth mixed with manure or sludge in the ratio of 2:1 by volume (2 part earth : 1 part manure) including flooding with water, removal of rubbish and surplus earth (if any), spraying with insecticides complete in all respects inclusive of cost of all materials, labour, tools, tackles etc. as per specifications and direction of the Site Engineer. (Note: Cost of manure, sludge or extra good earth, if needed shall be paid separately under relevant item). Holes 0.6 metre deep and 0.6 metre diameter.

Quantity21

Rate-

Amount -

Quantity21

Rate-

Amount -

Preparation of beds for hedging and shrubbery by excavating 60 cm deep and trenching the excavated base to a further depth of 30 cm, refilling the excavated earth after breaking clods and mixing with sludge or manure in the ratio of 8:1 (8 parts of stacked volume of earth after reduction by 20% : one part of stacked volume of sludge or manure after reduction by 8%), flooding with water, filling with earth if necessary, watering and finally fine dressing, levelling etc. including stacking and disposal of materials declared unserviceable and surplus earth by spreading and levelling as directed, within a lead of 50 m & lift up to 1.5 m complete. (Note: Cost of sludge, manure or extra earth shall be paid for seperately under relevant item).

Quantity21

Rate-

Amount -

Supply and planting sapling (not less than 45 cm in height and 60 cm centre to centre) of Casurina, Labrum, Gulmohar, Ashokas, Bottle Palm, Bougenvilla, Hibiscus, Roses or other approved type of variety of plants, watering & maintenance for 30 days minimum complete in all respects inclusive of cost of all materials, labour, tools, tackles etc. as per specifications and direction of the Site Engineer.

Quantity21

Rate-

Amount -

Supplying and providing non-shrinkable cement grout (SHRINKKOMP 20 or any other equivalent approved brand) for grouting holding down bolts in pocket holes for equipment foundation, including necessary surface preparation mixing of grout, curing as per manufacturer's recommendation/ specification and direction of the Site Engineer. (Note: This item shall be operated under specific instruction of the Engineer-in-Charge.)

Quantity105

Rate-

Amount -

Providing and making Construction/ Contraction joint by mechanically cutting 12mm x 25mm deep groove and filling with bituminous sealing compound including cleaning etc. complete as per drawing, specifications and directions of the Engineer-in-Charge.

Quantity21

Rate-

Amount -

Providing and fixing 75mm diameter P.V.C. pipe (4 Kg/sq.cm) for Weep Holes in Masonry/ RCC wall including providing 230x230x230 mm size (approx.) filter using pebles of 40mm & down size in every weep hole on retaining side etc. complete in all respects inclusive of cost of all materials, labour, tools, tackles etc. as per specifications and directions of the Engineer-in-Charge.

Quantity11

Rate-

Amount -

Providing and fixing 100mm wide Vertcal Fabric Blind system of VISTA/ MAC/ TRAC of approved make & shades complete along with standard accessories in required design/ shade as per manufacturer's recommendations, specification and directions of the Engineer-in-Charge.

Quantity21

Rate-

Amount -

Carrying out topographic survey/ mapping survey including Identifying & plotting the existing facilities for a radius of 100m from the each corner of the plot in all types of land involving mapping with advanced equipment (total station) plotting the existing underground and over ground facilities with type, size, height, function of structure in all respects as per drawing, technical specification and the direction of engineer-in-charge and submission of all drawings, reports, maps made in Auto CAD in 4 sets, along with the soft copies in CD/ External Hard disk. (1) Existing facilities including roads, buildings, type of buildings (Commercial/Industrial/Residential/School etc.),vacantland, Trees, Nalla, Canal, Inter-distance between plot edges and surroundingbuilding in terms of G/G+1/G+2 etc., nameof the roads, nearby km stone from the plot are to be covered in the survey. (2) Clearing of bushes/vegetation/cutting and removing tree branches (if required) are under the scope of the contractor (3) Arranging all Manpower, equipment, tools etc. required for the execution of the work are to be arranged by the contractor

Quantity3675

Rate-

Amount -

ELECTRICAL

Quantity-

Rate-

Amount -

SUPPLY, INSTALLATION, TESTING & COMMISSIONING

Quantity-

Rate-

Amount -

EARTH ELECTRODES

Quantity-

Rate-

Amount -

Supply, installation, testing of earthing system consisting of earth pits of perforated GI pipes earthing electrodes and copper plate terminal including construction of chamber using cement concrete with earthing pit cover and frame, supply of charcoal / /special backfill , salt etc including supply of interconnecting cables / strips including necessary welding etc complete as drawings, specifications and directions of the site engineer/Engineer-in-charge, including cost of tools, materials etc complete in all respects as per IS-3043 .The job shall also include testing of each earth pit and the entire earthing system on whole. Note: Earthing for field instruments shall be provided from Station earth grid covered in Electrical SOR.

Quantity4

Rate-

Amount -

Supply, Installation, testing & commissioning of Conventional /Maintenance free Earthing with GI earth pipe, 3.0 mtr long, 100 mm dia including accessories and providing masonary enclosure with cover plate having locking arrangement etc, (with charcoal and salt ) as required as per IS 3043. .

Quantity7

Rate-

Amount -

Supply, Installation & Laying, testing & commissioning of 50mm X 6 mm G.I strip complete with all accessories.

Quantity105

Rate-

Amount -

Supply, Installation & Laying, testing & commissioning of 25mm X 3 mm G.I strip complete with all accessories.

Quantity263

Rate-

Amount -

Supply, Installation & Laying, testing & commissioning of 25mm X 3 mm Cu strip complete with all accessories.

Quantity53

Rate-

Amount -

Supply, Installation & Laying, testing & commissioning of GI wire / rope 10 mm diameter

Quantity105

Rate-

Amount -

Supply, Installation & Laying, testing & commissioning of GI wire / rope 35 sq. mm

Quantity53

Rate-

Amount -

OUTDOOR LIGHT FITTINGS :

Quantity-

Rate-

Amount -

Supply, installation, testing, commissioning of lighting fixtures complete with mounting bracket, flame proof, control gear box as per the type of fixture, lamps etc. including pipe inserts for cables and connecting work, with all material and labour as per specifications, drawings and instruction of Engineer-in-charge. Work to be completed in all respects

Quantity-

Rate-

Amount -

Street lighting, integral flame proof well glass fixture (CMIFR approved for Zone-1/2 gas group IIA & IIB) with 110 W LED luminaire with flame proof control gear of Baliga make or equivalent reputed make (Subjected to prior approval from Engineer Incharge(EIC)).

Quantity29

Rate-

Amount -

Street lighting pole 7 mtr high GI octagonal pole (Type BOP-6030 of Bajaj make or equivalent) complete with bracket, GI clamps for fixing flame proof control gear box, cable from JB to fixture, flame proof gland, civil works and its materials including all labours and complete materials, as per standard drawing & specification

Quantity29

Rate-

Amount -

FLP & WP JUNCTION BOX 8WAY WITH 20 NOS TERMINALS Supply, erection, installation, testing and commissioning of flameproof & weather proof junction box for providing cable termination of motor, including connection and termination of earthing wire and conduits etc., including supply & installation of double compression cable glands & flame proof plugs for sealing all spare entries complete as per drawings, specifications and direction of the Site Engineer, including the cost of all labour, tools, consumable materials etc., complete in all respect.

Quantity3

Rate-

Amount -

Site misc. Materials

Quantity-

Rate-

Amount -

Supply, Installation of Caution Board

Quantity3

Rate-

Amount -

Supply, Installation of Shock treatment chart

Quantity3

Rate-

Amount -

Supply, Installation & Layin of Rubber mats(2 or 2.5mm thick X 0.9 or 1Mtr w , 1.1 KV) as per IS15652/IEC61111

Quantity3

Rate-

Amount -

Supply of Pairs of Rubber hand gloves IS Mark 1.1 KV

Quantity3

Rate-

Amount -

Supply, Installation of Fiirst aid box with Snake serum

Quantity3

Rate-

Amount -

Supply, installation & fixing of prefabricated perforated GI cable trays of width 150 mm, 300 mm, 450 mm & 600 mm as per site requirement for laying of cables with standard rung spacings. Load for support span of 2.5 meter as 30, 60, 75 & 90 (in Kg/Mtr) respectively with concentric static load as 70 Kg at the centre, with materials, labour, tools and tackles, consumables etc , as per drawings, specification and directions of Site Engineer / Engineer-in-Charge

Quantity315

Rate-

Amount -

Supply, Installation, testing & commissioning of 230 V, Electrical Siren for Fire alarm

Quantity1

Rate-

Amount -

Supply, Installation, testing & commissioning of Hand operated Siren for Fire alarm

Quantity1

Rate-

Amount -

CABLE

Quantity-

Rate-

Amount -

Supply, Installation & Laying, testing & commissioning with including cable glands, lugs and termination for aluminium conductor XLPE insulated armoured served sheated FRLS cables 1100 V grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S clamp etc. of suitable size or as directed by engineer incharge, complete in all respect, the armouring with fire retararted cable shall be properly connected with the earth conductor by clamps etc.

Quantity-

Rate-

Amount -

3C X 2.5 Sq.mm (CU) multi Stand Control cable

Quantity788

Rate-

Amount -

4C X 16 Sq.mm(AL) Out door Lightings

Quantity1208

Rate-

Amount -

3.5 C X 25 Sq.mm(AL) Panel Inter connection

Quantity105

Rate-

Amount -

3.5C X 50 Sq.mm(AL) Incoming power

Quantity158

Rate-

Amount -

12Px1.5 mm2 2XWYScreen (Cu), Signal Cable Screen

Quantity79

Rate-

Amount -

5Px 1.0 mm2 2XWY (Cu), Control Cable Screen

Quantity105

Rate-

Amount -

2P x 1.0 mm2 2XWY Screen (Cu), Signal Cable Screen

Quantity105

Rate-

Amount -

Cable Laying Laying of all type of cables LT (PVC / XLPE / Armoured/Unarmoured/Power/ Control/ Signalling) in trenches, in cable racks, in trays, in protective pipes, poles,columns, in conduits, in panels and on structures etc.;including the supply and installation of all required materials such as fixing clamps ,screws, cable straps, tags etc. as required (other than the supply of the conduits, cables, pipes, cable racks, trays, poles, structures and panels) complete in all respect, including cost of all labour, tools, consumable materials etc. and cutting the cables in required lengths as per drawings, specification and directions of Site Engineer / Engineer-in-Charge

Quantity-

Rate-

Amount -

Power & Control cables LT : OD upto 20 mm

Quantity788

Rate-

Amount -

Power & Control cables LT : OD above 20 mm and upto 40 mm

Quantity1470

Rate-

Amount -

DISTRIBUTION PANELS, DISTRIBUTION BOARD & APFC Panel with Capacitor banks

Quantity-

Rate-

Amount -

Supply, Installation, testing & commissioning of Electrical / Control Panels suitable for 415 Volt,3phase,3wire 50Hz AC supply system fabricated in compartmentlized from CRCA sheet steel not less than 2mm thick duly treated with 7 tanks process, powder coated with approved shade and oven dried . The complete panel will have a short circuit with stand capacity of 35 KA for 1 Second, IP 42 rating. It will have a suitable MS base channel powder coated. The panel will be fabricated in transportable sections. The panel shall have a common copper earth bar of size 25mm x 5mm at the rear with 2 Nos. earth studs. The LT panel will have suitable arrangement for bus-ducting/ cable termination into various incoming/outgoing switchgear as required. Cable termination will be at suitable terminal block at top/bottom of the panel and from the terminal block to switch, connection will be made with solid insulated strip/PVC insulated copper conductor cable of required current rating as required as per SLD.

Quantity-

Rate-

Amount -

Supply of MEDB as mentioned above & SLD

Quantity2

Rate-

Amount -

Supply of UPS & UPS Panel

Quantity-

Rate-

Amount -

5 KVA in (1+1) parallel redundant equal load sharing configuration excluding battery as per the tender specifications UPS to be in parallel redundant configuration with solid state voltage stabilizer in the bypass line. The UPS shall be suitable for 3 phase 415 V 50 Hz Input and 230 V Single phase 50 Hz Output.

Quantity2

Rate-

Amount -

Sealed maintenance free 2V VRLA battery in dual string for 4 hrs backup considering aging, temperature & capacity factors complete with all interconnecting cables, glands, battery cables, battery stands, AC distribution boxes, connectors & lugs etc as per the tender specifications for 5 KVA UPS.

Quantity2

Rate-

Amount -

Solar System for Emergency power supply operation (Capacity 6 KWp) as per specifications (i) Solar Panel 6 kWp (ii) Dual MPTT Charge Controller (iii) 120Ah sealed maintenance free VRLA battery bank (iv) 5.5 kVA 3 phase 415 V 50 Hz bi-directional inverter that will supply the load and charge the battery

Quantity2

Rate-

Amount -

Supply, Installation, testing & commissioning of Battery Charger 415V, 50 HZ, 10KW appx .have 1 X 100 % (Optional Item)

Quantity2

Rate-

Amount -

SUPPLY, INSTALLATION, TESTING & COMMISSIONING

Quantity-

Rate-

Amount -

Electrical Building Internal lighting Wiring

Quantity-

Rate-

Amount -

Wiring with PVC insulated 2.5 sqmm copper conductor wire for lighting fixtures points & fan points (1 fan point controlled by 1 modular switch) including all the meterials, metel boxes, providing space for electronic regulator in switch box , providing and fixing fan hook in the ceiling as per specifications and drawings.

Quantity37

Rate-

Amount -

Wiring with PVC insulated 2.5 sqmm copper conductor wire for phase & neutral , 650 V grade including earthing , the third pin with 1.5 sqmm copper conductor earthing insulated continuity wire forsmall power & exhaust/ wall bracket fan including all the meterials, metel boxes, providing and fixing of 5 pin 6 A modular socket and 10 A modular switch near the door or as as per specifications and drawings. The circuit wiring shall be with 4 sq. mm PVC copper wire from switchboard to 1st exhaust fan for multiple exhaust fans in one circuit.

Quantity13

Rate-

Amount -

Wiring for 250 V single phase and neutral 16 amps modular power plug point with PVC insulated 4 sq. mm. copper conductor wires for phase & neutral, 650 V grade including all the materials, metel boxes, earthing, the third pin with 2.5 sq. mm copper conductor earthing insulated continuity wire, complete with providing and fixing of 6 pin 16/6A modular socket and 20/10 A modular switch (1 plug point per circuit) as per specifications and drawings

Quantity13

Rate-

Amount -

WP Endura LED: Supply and fixing of surface mounted weather proof Endura LED WT 550 light fitting of PHILLIPS or equivalent approved make complete with all accessories such as LED module, driver, optics, thermal sink, connector blocks etc including installation

Quantity6

Rate-

Amount -

1 X 36/40 Watts, Bajaj Flexitron VIVA or equivalent : Supply and fixing of surface mounted Bajaj Flexitron VIVA light fitting of PHILLIPS or equivalent approved make complete with all accessories such as LED module, driver, optics, thermal sink, connector blocks etc including installation

Quantity27

Rate-

Amount -

LED Ceiling Point: Supply and fixing of surface mounted LED ceiling light fitting type Mainstream spot Aura 15W of PHILLIPS or equivalent approved make complete with all accessories such as LED module, driver, optics, thermal sink, connector blocks etc including installation

Quantity6

Rate-

Amount -

Point wiring for power plug point with 4 sq.mm stranded PVC insulated copper wire including earthing the third pin with 2.5 sq. mm copper insulated earthing wire complete with supply and fixing of recessed mounted industrial type 3 pin 32 A metal clad socket and plug, 20A MCB (Motor duty) housed in a 16 gauge M.S. Box

Quantity7

Rate-

Amount -

Supply, Installation, testing & commissioning of Ceiling Fan of 1200mm sweep complete erected in position with all accessories.

Quantity6

Rate-

Amount -

AIR CONDITIONER SPLIT TYPE - Supply & Installation of 1.8T Split Type five star BEE rated ACs (Daiiken / Hitachi / Carrier) along with 5KVA Voltage Stablizer & MS stand for outdoor unit, refregerant piping, drain piping complete as per instruction of EIC / Site Engineer

Quantity5

Rate-

Amount -

Exhaust fan Supply, installation, testing of single phase 230 V, industrial type heavy duty exhaust fan of GEC/Usha/Crompton Greaves or of approved make as per appendix -1 fitted/ provided with louvres, supports etc. including making the required opening on walls, fixing and connecting the wires etc. including earthing the body of the fan, making good the opening on the wall etc. complete as per specifications, drawings and direction of Site Engineer including the cost of all labour, tools, materials etc. complete.

Quantity-

Rate-

Amount -

12" Sweep

Quantity6

Rate-

Amount -

PVC Conduit pipes Supply, installation, fixing in position, PVC conduit pipes, of ISI marked , in concrete, brick work etc. during or after construction by making grooves in the wall, ceiling etc. cutting threads and jointing the pipes with PVC couplers, providing necessary tees, bends, junction boxes etc. with 12 SWG GI wire inside conduit without joint for concealed wiring, including making good the concrete, brick work, surfaces etc. complete as per drawings and direction of Site Engineer / Engineer-in-charge including cost of all labour, materials etc.

Quantity-

Rate-

Amount -

19 mm

Quantity105

Rate-

Amount -

25 mm

Quantity53

Rate-

Amount -

32 mm

Quantity53

Rate-

Amount -

Supply, Installation, testing & commissioning of lightning conductor finial made of 25 mm dia 300 mm long GI tube having single prong at top with 85 mm dia 3 mm thick GI base plate including holes etc. complete as required.

Quantity3

Rate-

Amount -

Supply, Installation, testing & commissioning of GI strip of 25 x 3 mm thick on parapet or surface of wall for lightning conductor complete with joints and other accessories as required.(for horizental run).

Quantity53

Rate-

Amount -

Supply, Installation, testing & commissioning of GI Tape of 25 x 3 mm thick on parapet or surface of wall for lightning conductor complete with joints and other accessories as required.(for vertical run).

Quantity53

Rate-

Amount -

Supply, Installation, testing & commissioning of Steel Structure Anagle, Chanels, Sq. bar, round Bar. Scope including Cutting, fabrication, painting & installation at site works

Quantity315

Rate-

Amount -

Supply, Installation Chequred plate 8 mm thick, Scope including Cutting, fabrication, painting & installation at site works

Quantity420

Rate-

Amount -

Supply, erection & installation of cable conduits made up of GI pipes of medium class 'B' subject to owner's approval in trenches (already made), on walls, concrete structure etc., including supply and installation of all the necessary pipe fittings such as bends, sockets, elbows, tees etc., bending, threading, binding, clamping, providings, spacers, plugs, packings, bushings etc., as required Job complete in all respects including the cost of all labour, tools, material etc. and as per specifications and directions of site engineer / Engineer-in-Charge.

Quantity-

Rate-

Amount -

50 mm

Quantity126

Rate-

Amount -

100 mm

Quantity105

Rate-

Amount -

DG Set in acoustic enclosure mounted on a common base frame, complete with PLC based AMF panel, 1 number fuel tank of 990 Ltrs along with piping interconnecting fuel tank & engine with isolation valves, batteries, battery charger & leads, AVM Pads, Residential Silencer, Motor driven separate lube oil priming pump, First fill of lube oil, Acoustic enclosure, complete for exhaust system including cladding & support structure, as per the specification, spares (2 years maintenance spares as mentioned in annexure-II and any other spares not covered in annexure-II but required as per the manufacturer recommendations) as per the specifications, all interconnecting power & controls cable along with the termination material (lugs & glands) etc., complete in all respect as per the specification.

Quantity-

Rate-

Amount -

25 KVA without AMF Panel

Quantity1

Rate-

Amount -

Above LT DG set required PLC based AMF panel etc for 25 KVA Ratings

Quantity1

Rate-

Amount -

16 Ways Earthing Plate Cu GI Plated

Quantity3

Rate-

Amount -

Supply & Installation of Spark Gap Arrester for Insulating Joint complete in all respects as per direction of Engineer-In-Charge including the cost of all labour, materials, tools and tackles etc.

Quantity1

Rate-

Amount -

INSTRUMENTATION

Quantity-

Rate-

Amount -

Supply, Calibration and Installation of instrumentation items listed below: (For details, refer instrumentation specifications)

Quantity-

Rate-

Amount -

Pressure indicators of range 0 to 100 kg/cm2 as per the technical specifications attached in tender

Quantity3

Rate-

Amount -

Check Metering System Installation of Check Metering System including transportation to site from store and their accessories inclusive of complete with Skid edge Junction boxes, cable and cabling from flow computer to control room and Flow computer to odourising unit, glanding, termination and earthing etc.

Quantity1

Rate-

Amount -

Gas Detection System (GDS) Design, detailed engineering, supply, configuration, testing, installation, erection ,commissioning of gas detection system with SCADA compatibility. Supply and Laying of cable inside the cable trench, cable tray for hardwired signals and power cables from gas sensors to gas detectors control unit including glanding, termination, ferruling, dressing etc. at both ends. Supply of cable trays, installation and erection of cable trays and, supply of erection materials, cable ferrules, cable lugs, cable tie etc. Folllowing items are included in the Gas Detection System:-

Quantity-

Rate-

Amount -

LEL Controller (16 Channel & SIL-2 Certifed) as per tender specifications

Quantity1

Rate-

Amount -

IR Based explosion proof & weather proof (Point type) Hydrocarbon detectors along with all mounting & other accessories as per tender specifications.

Quantity3

Rate-

Amount -

IR Based explosion proof & weather proof (Open Path type) Hydrocarbon detectors along with all mounting & other accessories as per tender specifications.

Quantity3

Rate-

Amount -

Explosion Proof / Weather Proof Hooters (for hazardous area) along with all mounting & other accessories as per the tender specifications.

Quantity1

Rate-

Amount -

Beacons (Explosion Proof & Weather Proof) for hazardous areas along with all mounting & other accessories as per the tender specifications.

Quantity1

Rate-

Amount -

Weather proof junction boxes including supply of double compression cable glands, plugs for unused cable entries including WP certificates as per the tender specifications for various detectors in buildings.

Quantity1

Rate-

Amount -

Supply of cables for Gas Detection System are included in below:

Quantity-

Rate-

Amount -

SIZE: 1T X1.5 SQMM

Quantity189

Rate-

Amount -

SIZE: 8T X1.5 SQMM

Quantity105

Rate-

Amount -

SIZE: 2P X1.5 SQMM

Quantity84

Rate-

Amount -

CABLE LAYING: Laying of armoured / unarmoured cables (control / signalling/ Triad/ LT cable etc.) and installation / pulling of telephone cables of all type in trenches, in cable racks, in trays, in protective pipes, poles, columns, in conduits, in panels, in buildings, walls, ceilings, and on structures etc.; including the supply and installation of all required materials such as fixing clamps, screws, cable straps, tags etc. as required (other than the supply of the conduits, cables, pipes, cable racks, trays, poles, structures and panels) complete in all respect,as per specifications,drawings and directions of the Site Engineer, including cost of all labour, tools, consumable materials etc. and cutting the cables in required lengths. Following items are included in Cable Laying:

Quantity-

Rate-

Amount -

Cables having outer diameter upto 20mm

Quantity273

Rate-

Amount -

Cables having outer diameter between 20 to 30 mm

Quantity105

Rate-

Amount -

Supply & installation of miscelleneous installation material such as junction / terminal boxes for signal cable looping, surge protection devices, all types of cable glands, PVC conduit, clamping , fixing material and other installtion material, minor civil repair related to installation of detectors/laying of conduit & cables as per site requirement to complete the job in every respect.

Quantity2

Rate-

Amount -

Fire Alarm Control Panel (FACP) - Control Building Design, detailed engineering, supply, configuration, testing, installation, erection and commissioning of FACP along with SCADA compatibility, third party vendor packages such as Gas detection system. FACP shall be installed in suitable cabinet inside control building. Supply, Laying of cable inside building between detectors, MCP, hooter and FACP including glanding, termination, ferruling, dressing etc. at both ends. Supply & installation of cable trays (if necessary), supply of erection materials, cable ferrules, cable lugs, cable tie etc. for successful commissioning of FACP. Following items are included in the Fire Alarm Control Panel (FACP):-

Quantity-

Rate-

Amount -

2 loop, Addressable, Intelligent Fire Detection and Alarm Panel for automatic fire detection & annunciation of alarms for various types of detectors installed like multi sensor, heat detectors, response indicators, loop isolators, manual call points, hooters etc installed in plant area and various buildings as per tender specifications

Quantity1

Rate-

Amount -

Addressable Multisensor Detectors, along with all mounting & other accessories for installation as per the tender specifications.

Quantity21

Rate-

Amount -

Addressable Manual Call Point (for Safe area) along with all mounting & other accessories as per the tender specifications.

Quantity6

Rate-

Amount -

Addressable Hooters (for Safe area) along with all mounting & other accessories as per the tender specifications.

Quantity3

Rate-

Amount -

Response Indicators used in below false ceiling and cable trench, along with all mounting & other accessories as per tender specifications.

Quantity15

Rate-

Amount -

Manual Call Point (Explosion Proof & Weather Proof) for hazardous area along with all mounting & other accessories as per tender specifications.

Quantity1

Rate-

Amount -

Beacons (Explosion Proof & Weather Proof) for hazardous areas along with all mounting & other accessories as per the tender specifications.

Quantity3

Rate-

Amount -

Cables, Cables Trays and Junction boxes Supply, laying, installation, erection of signals cable from field instruments to junction boxes, control room including termination, ferruling, dressing etc. Supply of cable trays, cables glands, junction boxes, erection materials, cable ferrules, cable lugs, cable tie. Installation and erection of cable trays and junction boxes.

Quantity-

Rate-

Amount -

Supply of Cables

Quantity-

Rate-

Amount -

SIZE: 2P X1.5 SQMM

Quantity735

Rate-

Amount -

SIZE: 12C X1.5 SQMM

Quantity126

Rate-

Amount -

Quantity-

Rate-

Amount -

Cables having outer diameter upto 20mm

Quantity861

Rate-

Amount -

Supply, installation & fixing of perforated GI trays of width 100 mm as per site requirement for laying of cables with standard rung spacings. Load for support span of 2.5 meter as 30, 60, 75 & 90 (in Kg/Mtr) respectively with concentricstatic load as 70 Kg at the centre, with materials, labour, tools andtackles, consumables etc , as per drawings, specification and directions of Site Engineer / Engineer-in-Charge.

Quantity284

Rate-

Amount -

Portable Gas Detector with controller, audio-visual alarm and suitable (intrisically safe) for hazardous area classified as classification Class I, Div. I Group C&D as per API-RP-500 as per tender specification

Quantity1

Rate-

Amount -

CCTV System Design, detailed engineering, supply, configuration, testing, installation, erection and commissioning of CCTV system. Folllowing items are included in the CCTV System:-

Quantity-

Rate-

Amount -

1/3" Day-Night Colour True IP Network Fixed Camera , focal length 4 to 8 mm or better, with IP 66 weatherproof housing, in-built lightning & surge protection, suitable mount, camera mounted interfacing junction box as applicable complete with cables, connectors, required interfaces etc. as per tender specifications including necessary erection hardware, poles, brackets etc. with flexible / rigid conduit and all other accessories as required.

Quantity15

Rate-

Amount -

Network Video Recorder/Failover NVR hardware as per specifications. The NVR Server shall be rack mount suitable for installation in Server Cabinet.

Quantity1

Rate-

Amount -

Client Workstation along with licensed Operating System Software, Keyboard with Joystick along with required cables, connectors, interfaces complete as per specifications.

Quantity1

Rate-

Amount -

CAT 6 cable and cabling from field cameras to CCTV control system. Cable for outdoor/buried use shall be armoured as per specifications.

Quantity525

Rate-

Amount -

Supply, erection and installation of cable conduits made up of GI pipes of medium Class B subject to owner’s approval in trenches already made, on walls, concrete structure etc. including supply and installation of all necessary pipe fittings such as bends, sockets, elbows, tees, etc. bending, threading, binding etc. as required for laying of cables, in roads, nalas, station pipe crossings and cable rising up to the equipments ( where it is not mentioned in drawings as contractor supplied) as per specifications, drawings, and direction of Site Engineer/ Engineer-in-charge including cost of all labors, tools & tackles, materials etc. complete in all respects for GI pipe with 25 mm nominal diameter

Quantity84

Rate-

Amount -

Day-Night Colour IP PTZ Dome Camera, with 15X to 20X Optical Zoom, minimum 10X Digital Zoom along with IP 66 weatherproof housing with IR Illuminator, industrial grade power supply, camera interfacing junction box as applicable, lightning & surge protection and suitable mount , complete with cables, connectors, required interfaces etc. as per tender specifications including necessary erection hardware, poles, brackets etc. with flexible / rigid conduit and all other accessories as required.

Quantity1

Rate-

Amount -

Supply of 5 to 6 meter pole for mounting of CCTV as per technical specification of the tender.

Quantity2

Rate-

Amount -

378 More

Evaluation Notes How It Works ?

Partners

Payment Type

Bank Certification Amount

Bank Guarantee Amount

Additional Info 1

Additional Info 2

Additional Info 3

Additional Info 4

Remarks

Potential Partner

Select Your Requirements

Help me get relevant partners for joint bidding

Help me get relevant material suppliers

Help me get project financing

Indian Oil Corporation Limited Tender

Indian Oil Corporation Limited - IOCL Tender

Costs

EMD

Document Cost

Tender Fee

Summary

Description

Contact

Tender Id

Bid Award Id

Tender No

Tender Authority

Purchaser Address

Website

BOQ Items

Potential Partner

TENDER BY COUNTRIES

United States Tenders|

United Kingdom Tenders|

Spain Tenders|

France Tenders|

Qatar Tenders|

Australia Tenders|

Canada Tenders|

China Tenders|

Malaysia Tenders|

Maldives Tenders|

Singapore Tenders|

Bangladesh Tenders|

Ethiopia Tenders|

Bhutan Tenders|

Kuwait Tenders|

Oman Tenders|

Germany Tenders|

Egypt Tenders|

Ghana Tenders|

Saudi Arabia Tenders

TENDER BY AUTHORITIES

Federal Road Agency Tenders|

Bangladesh Railway Tenders|

Area Metropolitana De Barcelona Tenders|

Jsc Russian Railways Tenders|

Kuwait Oil Company Tenders|

Civil Aviation Authority Tenders|

Food And Agriculture Org. Tenders|

Eskom Tenders|

Energy Regulation Commision Tenders|

Dept Of Defence Tenders

TENDER BY CATEGORIES

Agriculture Or Forestry Works Tenders|

Automobiles And Auto Parts Tenders|

Civil And Construction Tenders|

Consultancy Services Tenders|

Education And Training Services Tenders|

Electrical And Electronics Tenders|

Finance And Insurance Sectors Tenders|

Food Products Tenders|

Furnitures And Fixtures Tenders|

Healthcare And Medicine Tenders

TENDER BY PROCUREMENT

Goods Tenders|

Works Tenders|

Services Tenders

OFG MANUFACTURING BUSINESSES PRIVATE LIMITED

Head Office

Sales Office

COMPANY

About Us

Contact Us

Download Media Kit

POLICIES

Terms of Use

Privacy Policy

SUPPORT

Request Demo

MOBILE APPS