Indian Oil Corporation Limited Tender
For getting the details of etenders, if you are looking for information about them from the cumbersome government websites but are tired of doing so, Bidassist comes up with a one stop solution. It collates every Eproc telangana tender on Bidassist. One can approach it for the bidding process, registration process, etc., are explained below.
Indian Oil Corporation Limited - IOCL Tender
Civil And Construction
Civil Works Others
Housekeeping Services
Electrical and Electronics
Electrical Works
Eprocure
Opening Date10 May 2024
Closing Date31 May 2024
Tender AmountRefer Documents
Costs
EMD
₹ 1,07,300Document Cost
Refer DocumentsTender Fee
Refer Documents
Summary
Annual Rate Contract For Civil, Mechanical, Electrical, Instrumentation, Hse, Housekeeping Works
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_ERBBS_177303_1Bid Award Id
ViewTender No
SERPL/BBS/TS/2023-24/137Tender Authority
Indian Oil Corporation Limited ViewPurchaser Address
-Website
http://https://www.iocl.com/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
Bidders_help_Document_for_Preferencial_ Bidding_20230207_v1
Special_Instructions_to_the_Bidders_20230207_version_1a
BOQ Items
Deployment of Semi Skilled Manpower During Schedule/ Breakdown Maintenance of Equipments in Station for various Electrical works /T &I works
24
27826
23582
Insurance for manpower per month per person(PMJBY @ Rs. 436.00 & PMSBY @ Rs. 20.00)
144
44
38
Deployment of semi skilled Manpower as and when required for Cleaning work/ emergency work/breakdown maintenance work ** ( 1 semi killed labour present at site for the above mentioned works)
100
1070
907
Service charge (ITEM 20,30,40)
24
25153
21316.87
Service charge (ITEM 60)
100
160
136.05
CIVIL WORKS
-
-
-
Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means including getting out and disposal of excavated ea rth, all works up to any lead and lift, as directed by the Engineer-in-Charge : In all kinds of soil
5
241
205
Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means including getting out and disposal of excavated ea rth, all works up to any lead and lift, as directed by the Engineer-in-Charge: In Ordinary rock
5
468
397.32
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in d epth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5m
5
292
247.6
1:2:4 [1 cement : 2 coarse sand (Zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from n atural sources]
5
9030
7652.87
1:3:6 [1 cement : 3 coarse sand (Zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from n atural sources]
5
8326
7055.96
1:4:8 [1 cement : 4 coarse sand (Zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from n atural sources]
10
7701
6526.69
Centering and shuttering including strutting, propping etc. and removal of formwork for :Foundations, footings, bases for columns fo r PCC work
10
378
321.11
MISCELLANEOUS CONCRETE WORK : Extra for providing and mixing water proofing material in cement concrete work in doses by weight of c ement as per manufacturer's specification. [Note: Unit "KG" shall mean "PER KG PER 50 KG OF CEMENT"].
5
75
63.75
REINFORCED CEMENT CONCRETE :Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of c entering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 [1 cement : 1.5 coarse sand (Zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived fr om natural sources]
5
10267
8700.87
FORM WORK :Centering and shuttering including strutting, propping etc. and removal of form for all heights :Foundations, footings, b ases of columns, etc. for mass concrete
5
378
321.11
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto & a bove plinth level :Thermo-Mechanically Treated bars of grade Fe-500D or more
300
111
94.13
EXPANSION JOINTS: Providing and filling in position bitumen mix filler of proportion 80 Kg of hot bitumen, 1 Kg of cement and 0.25 c ubic metre of coarse sand for depth per expansion joints.
1
28007
23735
Supplying and providing non-shrinkable cement grout (SHRINKKOMP 20 or any other equivalent approved brand) for grouting holding down bolts in pocket holes for equipment foundation, including necessary surface preparation mixing of grout, curing as per manufacturer 's recommendation/ specification and directions of the Engineer-in-Charge. [Note: This item shall be operated under specific instruc tions of the Engineer-in-Charge]
15
86
72.92
Brick work with common burnt clay modular bricks of class designation 7.5 in foundation, plinth& above plinth in :Cement mortar 1:4 (1 cement : 4 coarse sand)
5
7309
6194.75
Providing and fixing ISI marked flush door shutters conforming to IS:2202 (Part I) non-decorative type, core of block board constru ction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face ven eers on both faces of shutters : 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
5
2420
2051.48
Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : 250x10 mm
2
497
421.22
Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
50
114
97
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing i n position and applying a priming coat of approved steel primer all complete.
50
135
114.7
Providing and fixing Stainless Steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, b uffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts comple te, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of require d size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of the Engineer-in-Charge. [Note : For payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, f asteners etc.]
50
765
648.7
Providing and fixing G.I. chain link fabric fencing of required width in mesh size 25x25 mm made of G.I. wire of dia 3 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the directions of the Engineer-in-Charge.
75
1209
1025.4
FLOORING Supplying and laying flat brick soling in foundation trench, in floors, garages, sumps, etc., with bricks of class designat ion 50 laid to proper slope, level and grade etc. filling of the joints with sand etc. complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and directions of the Engineer-in-Charge.
30
828
702.48
Chequered precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement : 4 coarse sand) Dark shade pigment using ordinary cement
20
1234
1046.15
Supply and fixing Kota stone slab flooring 25 mm thick over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cem ent : 4 coarse sand) :
10
2037
1726.87
CEMENT PLASTER 15 mm cement plaster on the rough side of single or half brick wall of mix : 1:4 (1 cement : 4 fine sand)
40
409
347.09
6 mm cement plaster 1:3 (1 cement : 3 fine sand) finished with a floating coat of neat cement and thick coat of Lime wash on top of walls when dry for bearing of R.C.C. slabs and beams.
40
401
340.05
Neat cement punning.
15
83
70.74
Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth comple te.
20
261
221.74
Providing & fixing galvanized chicken wire net 20 Gauge, 20 mm mesh size in plastering work at the junction of RCC Columns/ Beams & brickwork as directed by the Engineer-in-Charge.
5
285
241.86
Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, o f required shade and colour complete, as per manufacturer's specification : Two or more coats on new work
150
115
98.24
Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and inc luding priming coat of exterior primer applied @ 2.20kg/10 sqm
20
308
261.53
Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete : On steel & concrete work
100
252
213.9
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two or more coats on new work
200
161
137.02
Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade : Two or more coats on new work
20
171
145.02
Lettering with black Japan paint of approved brand and manufacture. [Note: Unit "EA" shall mean "PER LETTER PER CM HEIGHT"].
200
6
5.29
Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratch es etc. complete.
200
18
16.01
Distempering with 1st quality acrylic distemper (Ready Mix) having VOC content less than 50 gms/litre, of approved brand and manufac ture to give an even shade : Old work (one or more coats)
200
72
61.2
Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.
200
24
20.57
Finishing walls with textured exterior paint of required shade : Old work (Two or more coats on existing cement paint surface applie d @ 3.28 ltr/10 sqm.
100
224
190.23
Repair to plaster of thickness 12 mm to 20 mm in patches of area up to 2.5 SQM including cutting the patch in proper shape, raking o ut joints, preparing and plastering the wall surface etc. complete, including disposal of rubbish at unobjectionable area outside Ow nder's premises, all complete as per directions of the Engineer-in-Charge : With cement mortar 1:4 (1 cement : 4 fine sand)
20
555
470.98
Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M. S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connect ion with the building etc wherever required for inspection of work at required locations with essential safety features for the work men etc. complete as per directions and approval of the Engineer-in-Charge. The elevational area of the scaffolding shall be measure d for payment purpose. The payment will be made once irrespective of duration of scaffolding. [Note: This item to be used for mainte nance work judicially, necessary deduction for scaffolding in the existing item to be done]
50
343
290.79
Providing and injecting approved grout in proportion recommended by the manufacturer into cracks/ honey-comb area of concrete/ mason ry by suitable gun/ pump at required pressure including cutting of nipples after curing etc. complete as per directions of the Engin eer-in-Charge. [Note: The payment shall be made on the basis of actual weight of approved grout injected] : Epoxy injection grout in Concrete/ RCC work of approved make.
10
1053
893.17
Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per the directions of Engineer-in-Charge. [Notes: (1) Dismantling shall be allowed during day shift only & prior permission for the same shall be obta ined. (2) Providing of necessary covers/ barricades around the work area shall be done prior to dismantling operations]
5
2311
1958.64
Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per the directions of Engineer-in-Charge. [Notes: (1) Dismantling shall be allowed during day shift only & prior permission for the same shall be obtained. (2) Providing of necessary covers/ barricades around the work area shall be done prior to dismantling operations. (3) Cutting of all reinforcement shall be done using hack saw or chiesel or any other method as approved by the Engineer-in-Charge]
5
3371
2857.39
Extra for cutting reinforcement bars manually/ by mechanical means in R.C.C. or R.B. work as per direction of the Engineer-in-Charge . [Notes: (1) Cutting of all reinforcement shall be done using hack saw or chiesel or any other method as approved by the Engineer-i n-Charge. (2) Payment shall be made on the cross sectional area of R.C.C. or R.B. work]
10
1148
973.26
Demolishing brick work in cement mortar manually or by mechanical means including stacking of serviceable material and disposal of u nserviceable material within 50 metres lead as per the directions of Engineer-in-Charge. [Notes: (1) Dismantling shall be allowed du ring day shift only & prior permission for the same shall be obtained. (2) Providing of necessary covers/ barricades around the work area shall be done prior to dismantling operations]
5
1955
1657.03
Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead : For thickness of tiles 10 mm to 25 mm
10
72
61.82
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dump ing ground within 50 metres lead.
200
51
43.96
Disposal of building rubbish/ malba/ similar unserviceable, dismantled or waste materials by mechanical means, including loading, tr ansporting, unloading to approved municipal dumping ground or as approved by the Engineer-in-Charge, beyond 50 m initial lead, for a ll leads including all lifts involved.
5
184
156.53
Providing and applying 2.5 mm thick road marking strips (retro-reflective) of specified shade/ colour using hot thermoplastic materi al by fully/ semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank hea ter and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the ro ad surface of all dirt, seals, oil, grease and foreign material etc. complete as per directions of the Engineer-in-Charge and accord ance with applicable specifications.
10
807
684.61
Providing and fixing post delineators made of ABS round body fitted with 2 nos. 100 mm dia high reflective reflectors and mounted on MS pipe of 65 mm dia duly powder coated anti-rust and anti theft steel to be installed as per directions of the Engineer-in-Charge.
50
950
805.4
Providing and laying factory made chamfered edge interlocking Cement Concrete paver blocks in foot path, park & lawns driveway or li ght & traffic parking etc. of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in req uired colour & pattern over 50mm thick compacted bed of course sand, compacting and proper embedding/laying of inter locking paver b locks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, all complete as per manufacturer's specifications & directions of the Engineer-in-Charge : 60mm thick Cement Concrete paver block of M-35 grade with approved colour, design & pattern .
50
1176
997.38
Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thi ckness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc . as per directions of the Engineer-in-Charge. [Notes: (1) Length of finished kerb edging shall be measured for payment. (2) Precast C.C. kerb stones shall be approved by the Engineer-in-Charge.]
5
11142
9442.54
Taking out existing kerb stones of all types from footpath/ central verge, including removal of mortar etc., disposal of unserviceab le material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre l ead as per directions of the Engineer-in-Charge.
20
37
31.62
Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserv iceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 me tre lead as per directions of the Engineer-in-Charge.
200
125
106.02
Laying old cement concrete interlocking paver blocks of any design/ shape laid in required line, level, curvature, colour and patter n over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direct ions of the Engineer-in-Charge. [Note: Old CC paver blocks shall be supplied by the department free of cost].
150
431
365.47
Laying at or near ground level old kerb stones of all types in position to the required line, level and curvature, jointed with ceme nt mortar 1:3 (1 cement : 3 coarse sand), including making joints with or without grooves (thickness of joints, except at sharp curv e, shall not be more than 5 mm), including making drainage opening wherever required etc. complete as per directions of the Engineer -in-Charge. [Notes: (1) Length of finished kerb edging shall be measured for payment. (2) Old kerb stones shall be supplied by the d epartment free of cost.]
20
110
93.51
Providing and fixing factory made precast RCC perforated drain covers, having concrete of strength not less than M-25, of size 1000x 450x50 mm, reinforced with 8 mm dia four nos longitudinal & 9 nos. cross sectional T.M.T. hoop bars, including providing 50 mm dia p erforations @ 100 to 125 mm c/c, including providing edge binding with M.S. flats of size 50 mm x 1.6 mm complete, all as per direct ions of the Engineer-in-Charge.
10
1610
1365.01
HORTICULTURE & LANDSCAPING :
-
-
-
Supplying and stacking of good earth at site including royalty and carriage up to any lead complete. [Note: Volume of earth measured in stacks will be reduced by 20% for payment].
50
730
619.33
Supplying and stacking of well decayed cattle manure at site including royalty and carriage up to any lead complete. [Note: Volume o f cattle manure measured in stacks will reduced by 8% for payment].
50
358
303.99
Providing and laying Neelgiri/ Mexican grass turf with earth 50mm to 60mm thickness of existing ground prepared with proper level an d ramming with tools wooden (Dhurmos) and than rolling the surface with light roller make the surface smoothen and light waterning w ith sprinkler and maintenance for 30 days or more till the grass establish properly, complete as per direction of the Engineer-in-Ch arge.
100
328
278.66
Supply and planting sapling (not less than 45 cm in height and 60 cm centre to centre) of Casurina, Labrum, Gulmohar, Ashokas, Bottl e Palm, Bougenvilla, Hibiscus, Roses or other approved type of variety of plants, watering & maintenance for 30 days minimum complet e in all respects inclusive of cost of all materials, labour, tools, tackles etc. as per specifications and directions of the Engine er-in-Charge.
50
685
580.95
Providing Circular Cement Concrete pots of specified size, cast with cement concrete of nominal mix 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 6 mm nominal size), reinforced with 7 Nos (3 Nos horizontal & 4 Nos vertical “U“ shape) M.S. wires of 3.5 m m dia as per design, including required form work, finishing with cement punning on exposed surface, curing for specified period and stacking in required rows & height, all complete as per direction of the Engineer-in-Charge.
-
-
-
Top inside diameter 35 cm, outer bottom diameter 25 cm, total height 35 cm with wall thickness of 25.4 mm
50
335
284.26
Top inside diameter 30 cm, outer bottom diameter 20 cm, total height 30 cm with wall thickness of 25.4 mm
50
244
207.03
Providing watering through water tanker having 5000 litre capacity with one labour for watering including cost of water, filling of tanker, watering at site with all leads and lifts as per direction of the Engineer-in-Charge. [Note: Unit "EA" shall mean "PER TRIP" ].
20
1255
1063.75
Supply and spreading of approved fine river sand as per the direction of Engineer-in-charge.
20
1957
1658.7
Supply of tractor with trailer on hire charges for 08 hours per day including rendering the services of 4 labourers driver, fuel an d other consumables, tools, tackles etc. for transportation of rubbish/ waste materials complete as per directions of Engineer-in-Charge.(8 hours working period of one tractor i s considered as one tractor day). Unit "EACH" (EA) stands for tractor days.
15
5704
4834
Providing and laying Non Pressure NP-3 class (Medium duty) R.C.C. Pipes including collars/spigot jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. Complete. 450 mm dia. R.C.C. pipe
10
2940
2491.78
MECHANICAL WORKS
-
-
-
Supply and Erection of Structural Steel: Supplying at site, steel structural items such as steel plates, bars, chequered plates, angles, beams channels, commercial quality h eavy pipes, C.I. Rollers, bolts & nuts, washers, grouting bolts, padding plates etc., fabrication and erection of saddle supports an d other type of supports for pipes manifolds and valves, fabrication and erection of platforms walkways, stairways etc., sand blast/ power brush cleaning, priming and painting the finished structures including supply of all other inputs such as labour, materials, consumable etc. necessary to perform and complete the work in all respect, in accordance with drawings, specifications and instructi ons of the Site Engineer / EIC.
2
145255
123097.84
Supply and Erection of Electroforged Grating Supplying at site, steel structural items such as steel plates, bars, fabrication of gratings by electroforged method, after comple te fabrication entire gratings shall be Hot Dip galvanized, gratings shall be normany of size 810mm X 250mm for steps and 1200mm X 1 000 mm or 810mm X 1000 mm for platforms / walkways, or any size as advised by EIC. Placing gratings in a replaceable mannerbolting w ith base frame of ISA by suitable GI clamps and GI fasteners, including supply of all other inputs such as labour, materials, consum able etc. necessary to perform and complete the work in all respect, in accordance with drawings, specifications and instructions of the Site Engineer / EIC.
1
245913
208401.42
Supply and application One coat of high build, self priming, rust encapsulating polyamidoamine cured epoxy mastic coating aluminium version (min 80 % solid by volume) to a dry film thickness of 100 microns including surface preparation by hand/wire brush/power too l
100
694
588.6
Supply and application one coat of Epoxy MIO (min 80% solid by volume) with minimum 100 microns DFT surface preparation by hand/wir e brush & cloth
100
501
424.97
Supply and application of 100 microns DFT of Isocyanite Aliphatic PU in two coats (50 microns each) preferably with airless spray gu n surface preparation by hand/wire brush & cloth
600
636
539.61
PU /liquid epoxy Coating of under ground piping: Polyurethane Coating(PU)/ Liquid Epoxy Coating _E1 @ 2 coats or more to acheive 100 0 µm
50
2891
2450.68
Supply and delivery of Spiral Wound Metallic Gaskets at respective stations as per Station wise Break up of material supply and as p er technical specifications from approved vendors specified in tender document: 12" SWMG ANSI 150#_A.7
16
687
582.72
Supply and delivery of Spiral Wound Metallic Gaskets at respective stations as per Station wise Break up of material supply and as p er technical specifications from approved vendors specified in tender document: 10" SWMG ANSI 150#_A.8
16
559
474.43
Supply and delivery of Spiral Wound Metallic Gaskets at respective stations as per Station wise Break up of material supply and as p er technical specifications from approved vendors specified in tender document: 6" SWMG ANSI 150#_A.10
8
333
282.7
Supply and delivery of Spiral Wound Metallic Gaskets at respective stations as per Station wise Break up of material supply and as p er technical specifications from approved vendors specified in tender document: 4" SWMG ANSI 150#_A.11
12
271
230.43
Supply and delivery of Spiral Wound Metallic Gaskets at respective stations as per Station wise Break up of material supply and as p er technical specifications from approved vendors specified in tender document: 3" SWMG ANSI 150#_A.12
30
217
184.31
Supply and delivery of Spiral Wound Metallic Gaskets at respective stations as per Station wise Break up of material supply and as p er technical specifications from approved vendors specified in tender document: 2" SWMG ANSI 150#_A.13
60
132
112.58
Supply and delivery of Spiral Wound Metallic Gaskets at respective stations as per Station wise Break up of material supply and as p er technical specifications from approved vendors specified in tender document: 1" SWMG ANSI 150#_A.15
100
81
69.34
Supply and delivery of Spiral Wound Metallic Gaskets at respective stations as per Station wise Break up of material supply and as p er technical specifications from approved vendors specified in tender document: 6" SWMG ANSI 300#_A.21
12
803
681.05
Supply and delivery of Spiral Wound Metallic Gaskets at respective stations as per Station wise Break up of material supply and as p er technical specifications from approved vendors specified in tender document: 4" SWMG ANSI 300#_A.22
4
611
518.59
Supply and delivery of Spiral Wound Metallic Gaskets at respective stations as per Station wise Break up of material supply and as p er technical specifications from approved vendors specified in tender document: 3" SWMG ANSI 300#_A.23
4
395
335.46
Supply and delivery of Spiral Wound Metallic Gaskets at respective stations as per Station wise Break up of material supply and as p er technical specifications from approved vendors specified in tender document: 2" SWMG ANSI 300#_A.24
4
194
164.77
Supply and delivery of Spiral Wound Metallic Gaskets at respective stations as per Station wise Break up of material supply and as p er technical specifications from approved vendors specified in tender document: 14" SWMG ANSI 900#_A.42
4
2582
2188.89
Supply and delivery of Spiral Wound Metallic Gaskets at respective stations as per Station wise Break up of material supply and as p er technical specifications from approved vendors specified in tender document: 12" SWMG ANSI 900#_A.43
8
1922
1629.61
Supply and delivery of Spiral Wound Metallic Gaskets at respective stations as per Station wise Break up of material supply and as p er technical specifications from approved vendors specified in tender document: 8" SWMG ANSI 900#_A.45
6
1304
1105.87
Supply and delivery of Spiral Wound Metallic Gaskets at respective stations as per Station wise Break up of material supply and as p er technical specifications from approved vendors specified in tender document: 4" SWMG ANSI 900#_A.47
8
601
509.92
Supply and delivery of Spiral Wound Metallic Gaskets at respective stations as per Station wise Break up of material supply and as p er technical specifications from approved vendors specified in tender document: 3" SWMG ANSI 900#_A.48
6
467
396.43
Supply and delivery of Spiral Wound Metallic Gaskets at respective stations as per Station wise Break up of material supply and as p er technical specifications from approved vendors specified in tender document: 2" SWMG ANSI 900#_A.49
12
314
266.72
Supply and delivery of Spiral Wound Metallic Gaskets at respective stations as per Station wise Break up of material supply and as p er technical specifications from approved vendors specified in tender document: 1" SWMG ANSI 900#_A.50
30
144
122.32
Supply and delivery of Steel Fasteners at respective stations as per Station wise Break up of material supply and as per technical s pecifications from approved vendors specified in tender document. Fasteners for Flanges 14" x 900# (1.500" Dia. X 11.75" Length)_B.5 8
20
1291
1094.44
Supply and delivery of Steel Fasteners at respective stations as per Station wise Break up of material supply and as per technical s pecifications from approved vendors specified in tender document. Fasteners for Flanges 12" x 900# (1.375" Dia. X 11.00" Length)_B.6 0
20
923
782.39
Supply and delivery of Steel Fasteners at respective stations as per Station wise Break up of material supply and as per technical s pecifications from approved vendors specified in tender document. Fasteners for Flanges 8" x 900# (1.375" Dia. X 9.75" Length)_B.64
12
905
767.79
Supply and delivery of Steel Fasteners at respective stations as per Station wise Break up of material supply and as per technical s pecifications from approved vendors specified in tender document. Fasteners for Flanges 2" x 900# (0.875" Dia. X 6.50" Length_B.72
16
137
116.4
Supply and delivery of Steel Fasteners at respective stations as per Station wise Break up of material supply and as per technical s pecifications from approved vendors specified in tender document. Fasteners for Flanges 1" x 900# (0.875" Dia. X 5.75" Length_B.74
16
144
122.32
Supply and delivery of Steel Fasteners at respective stations as per Station wise Break up of material supply and as per technical s pecifications from approved vendors specified in tender document. Fasteners for Flanges 12" x 150# (0.875" Dia. X 5.50" Length ) _B. 7
24
204
173.01
Supply and delivery of Steel Fasteners at respective stations as per Station wise Break up of material supply and as per technical s pecifications from approved vendors specified in tender document. Fasteners for Flanges 10" x 150# (0.875" Dia. X 5.25" Length ) _B. 8
24
192
162.96
Supply and delivery of Steel Fasteners at respective stations as per Station wise Break up of material supply and as per technical s pecifications from approved vendors specified in tender document. Fasteners for Flanges 6" x 150# (0.750" Dia. X 4.50" Length) _B.10
16
121
102.86
Supply and delivery of Steel Fasteners at respective stations as per Station wise Break up of material supply and as per technical s pecifications from approved vendors specified in tender document. Fasteners for Flanges 3" x 150# (0.625" Dia. X 4.00" Length ) _B.1 2
20
77
65.35
Supply and delivery of Steel Fasteners at respective stations as per Station wise Break up of material supply and as per technical s pecifications from approved vendors specified in tender document. Fasteners for Flanges 2" x 150# (0.625" Dia. X 3.75" Length ) _B.1 3
20
77
65.59
Supply and delivery of Steel Fasteners at respective stations as per Station wise Break up of material supply and as per technical s pecifications from approved vendors specified in tender document. Fasteners for Flanges 1" x 150# (0.500" Dia. X 3.00" Length ) _B.1 5
20
59
50.69
Above ground process piping: Taking delivery & transporting of pipes from designated stock pile location /Designated godown both fro m outside & inside station premises. Taking delivery of pipe fittings, steel flanges, spiral wound metallic gaskets & fasteners from designated location within station premises, transporting the same to site, fabrication and erection of above ground piping includi ng cutting, edge preparation, bending, threading, lining up, welding and installing pipes and pipe fittings, flanges, elbows, equal and reducing outlet tees,concentric/eccentric reducers, y-type strainers, drain funnels, vent pipes and tapping for instruments such as pressure gauges, thermal relief valves, thermowells etc., installing above ground at all elevations connecting with equipment no zzles, valves, vessels, in line instruments etc., welded and threaded pipe line of different pressure ratings, flushing pipes by wat er after cleaning by compressed air, hydrostatic testing of each section to the specified pressure, draining the water, tie-in, fina l cleaning-up and dispoal of wastes and surpluses including providing all inputs such as labour, material, equipments and consumable s necessary to perform the work (other than those specifically under taken by the owner in this contract) and completing the work in all respects in accordance with the drawings, specifications and instructions of Site Engineer / EIC. Thickness and Grade mentioned in the item are for reference only and may vary. Payment shall be based on OD
-
-
-
1.315" OD x 0.179"WT ASTM A 106 Gr B /A333_D11
100
972
824.39
2.375" OD x 0.218"WT ASTM A 106 Gr B /A333 _D9
100
1411
1196.29
3.5" OD x 0.216"WT ASTM A 106 Gr B /A333 _D8
50
2130
1805.38
Strengthening of joints by depositing additional weld beads (one run with 4 mm AWS 7018) wherever required to restore the joints to the desired size of 5 mm / 6mm including supply of all labour, equipment, consumables, labour etc required to complete the job in al l respects as per the instruction of Site Engineer/ EIC.
100
674
571.31
Strengthening of joints by depositing additional weld beads (one run with 4 mm AWS 6013) wherever required to restore the joints to the desired size of 5 mm / 6mm including supply of all labour, equipment, consumables, labour etc required to complete the job in al l respects as per the instruction of Site Engineer/ EIC.
100
674
571.31
Supplying and operating of JCB for excavation, grading, clearing of grass, uprooting of tress, etc
50
1022
866.87
Providing Hydra 12 Ton Capacity for works as directed by EIC/Site Engg (6 Hrs)
50
2112
1790.37
Reconditioning of Basket Strainer by providing double layer mesh as per the instruction of EIC/Site
4
9883
8376.26
Supply of M-Oil
100
170
144.17
Supply of Belzona 1161
10
17769
15059
Supply and fixing of stickers of various sizes. Measurement shall be total length and height of the sticker.
100
191
162
ELECTRICAL WORKS
-
-
-
SAFETY EQUIPMENT - Supplying the following Safety Equipment as per directions of Site Engineer / Engineer-in-Charge complete in all respects including transportation charges: RUBBER HAND GLOVES: Rubber hand gloves suitable for 11/6.6 KV operation with ISI mark.
2
3624
3071.27
INSULATING MATS - Supply & installation of 2000 mm X 1000 mm and of thickness as mentioned below, approved quality insulating Elasto mer mats as per specifications: Insulating Elastomer mats conforming to IS 15652:2006 of thickness 2 mm (Class A)
4
3193
2706.58
INSULATING MATS - Supply & installation of 2000 mm X 1000 mm and of thickness as mentioned below, approved quality insulating Elast omer mats as per specifications: Insulating Elastomer mats conforming to IS 15652:2006 of thickness 2.5 mm (Class B)
4
3177
2692.38
Excavation in unpaved areas of earth in work sites for conventional cable trenches for a depth upto 1.5 metres including shoring, strutting etc. (if necessary), backfilling the trench, job complete in all respects, including all labour and materials comple te as per drawings, specification and directions of Site Engineer / Engineer-in-Charge
100
793
672.35
WBM Road/concrete breaking for cable trenches including required shoring strutting etc., and repairing of the road/dyke to origina l condition and disposing off excess materials (within the work site) job complete in all respects including the cost of labou r, tools, materials, load, lift hire charges of equipments, if any, complete as per drawings, specification and directions of Site Engineer / Engineer-in-Charge.
4
5198
4405.55
Cable Laying - Laying of all type of cables LT (PVC / XLPE / Armoured/Unarmoured/Power/ Control/ Signalling) in trenches, in cabl e racks, in trays, in protective pipes, poles, columns, in conduits, in panels and on structures etc.; including the supply and inst allation of all required materials such as fixing clamps, screws, cable straps, tags, etc. as required (other than the supply of the conduits, cables, pipes, cable racks, trays, poles, structures and panels) complete in all respect, including cost of all la bour, tools, consumable materials, etc. and cutting the cables in required lengths as per drawings, specification and directions o f Site Engineer / Engineer-in-Charge:
700
41
34.99
Cable Laying - Laying of all type of cables LT (PVC / XLPE / Armoured/Unarmoured/Power/ Control/ Signalling) in trenches, in cabl e racks, in trays, in protective pipes, poles, columns, in conduits, in panels and on structures etc.; including the supply and inst allation of all required materials such as fixing clamps, screws, cable straps, tags, etc. as required (other than the supply of the conduits, cables, pipes, cable racks, trays, poles, structures and panels) complete in all respect, including cost of all la bour, tools, consumable materials, etc. and cutting the cables in required lengths as per drawings, specification and directions o f Site Engineer / Engineer-in-Charge:
700
59
50.23
Disconnection, Sealing with waterproof cable end cover and coiling it neatly for placing in cable trench below, of incoming and outg oing cables from the panels and equipments.
5
398
337.71
Disconnection, Sealing with waterproof cable end cover and coiling it neatly for placing in cable trench below, of incoming and outg oing cables from the panels and equipments.
1
781
661.91
Supply, installation & fixing of prefabricated perforated GI cable trays with tray cover of width 150 mm, 300 mm, 450 mm & 600 mm as per site requirement for laying of cables with standard rung spacings. Load for support span of 2.5 meter as 30, 60, 75 & 90 (in Kg /Mtr) respectively with concentric static load as 70 Kg at the centre, with materials, labour, tools and tackles, consumables etc , as per drawings, specification and directions of Site Engineer / Engineer-in-Charge.
500
224
190.12
Supplying and spreading of approved quality fine dry river sand in cable trenches including the cost of all material, transport, loa d and lift charges, labour, tools and tackles, consumables etc , as per drawings, specification and directions of Site Engineer / Engineer-in-Charge
50
986
836.06
Supply and laying of approved quality 75 mm thick second class brick flat soling with sand filling in the interstices, in cable tren ches for protectionincluding the cost of all brick and sand, labour, load and lift charges , tools and tackles etc , as per drawing s, specification and directions of Site Engineer / Engineer-in-Charge.
50
1016
861.78
Supply, erection & installation of MS cable markers, including excavation, installation of the markers, cement concrete grouting, ba ckfilling, materials, labour, tools and tackles, consumables etc , as per drawings, specification and directions of Site Engineer / Engineer-in-Charge.
5
2839
2406.6
LT Cable joint (1.1 KV) - Making straight through joints on Al/Cu conductor XLPE/PVC insulated armoured cable including the supply o f required materials such as cable jointing kit (of heat shrinkable sleeve type of Raychem/Mseal/3M) , materials, labour, tools and tackles, consumables etc , as per drawings, specification and directions of Site Engineer / Engineer-in-Charge:
6
5574
4724.18
LT Cable joint (1.1 KV) - Making straight through joints on Al/Cu conductor XLPE/PVC insulated armoured cable including the supply o f required materials such as cable jointing kit (of heat shrinkable sleeve type of Raychem/Mseal/3M) , materials, labour, tools and tackles, consumables etc , as per drawings, specification and directions of Site Engineer / Engineer-in-Charge:
2
6794
5757.77
LT Cable joint (1.1 KV): Making straight through joints on Al/Cu conductor XLPE/PVC insulated armoured cable including the supply of required materials such as cable jointing kit (of heat shrinkable sleeve type of Raychem/Mseal/3M) , materials, labour, tools and t ackles, consumables etc , as per drawings, specification and directions of Site Engineer / Engineer-in-Charge
1
9603
8138.69
Supplying, installation, testing of GI earthing electrode, including the supply and installation of the CI cover, charcoal /special backfill etc. and construction of chamber; complete as per drawings,specifications and directions of the Site Engineer, Including the cost of all labour, tools, materials etc. complete in all respects.
4
18741
15882.89
Supply, installation, testing and commissioning of ACE (Artificial concept of earthing with chemical rod) Chemrod earthing electrode by digging earthing Item includes the supply and installation of the CI/RCC cover in the earth pit, backfilling etc. and constructi on of chamber; complete including excavation, backfilling and supply of all materials required for making earth pit as per drawings, specifications and directions of the Site Engineer, Including the cost of all labour, tools, materials etc. complete in all respect s.
4
20239
17152.3
Supply & Installation of G.I. earthing plate as per standard drawing outside the buildings. The item also includes grouting of the p late as shown in the drawing. The item should be complete in all respect including all materials, tools, tackels etc. and as per dir ection of EIC / Site engineer.
2
1848
1566.6
EARTH STRIP / WIRE / ROPE / CABLE - Supply, installing and testing of earthing strip/wire/rope/cable for completely making the eart hing grid system by supplying, laying the GI / Cu strip and making all the necessary welding joints, connecting to the earthing electrodes and existing earthing grid etc., complete as per drawings, specifications and directions of the Site engineer/Engineer -in-charge, including the cost of all labour, tools, materials, etc. complete in all respect:
50
338
286.76
EARTH STRIP / WIRE / ROPE / CABLE - Supply, installing and testing of earthing strip/wire/rope/cable for completely making the eart hing grid system by supplying, laying the GI / Cu strip and making all the necessary welding joints, connecting to the earthing electrodes and existing earthing grid etc., complete as per drawings, specifications and directions of the Site engineer/Engineer -in-charge, including the cost of all labour, tools, materials, etc. complete in all respect:
50
236
200.65
EARTH STRIP / WIRE / ROPE / CABLE - Supply, installing and testing of earthing strip/wire/rope/cable for completely making the eart hing grid system by supplying, laying the GI / Cu strip and making all the necessary welding joints, connecting to the earthing electrodes and existing earthing grid etc., complete as per drawings, specifications and directions of the Site engineer/Engineer -in-charge, including the cost of all labour, tools, materials, etc. complete in all respect:
50
918
778.6
EARTH STRIP / WIRE / ROPE / CABLE - Supply, installing and testing of earthing strip/wire/rope/cable for completely making the eart hing grid system by supplying, laying the GI / Cu strip and making all the necessary welding joints, connecting to the earthing electrodes and existing earthing grid etc., complete as per drawings, specifications and directions of the Site engineer/Engineer -in-charge, including the cost of all labour, tools, materials, etc. complete in all respect:
100
75
64.31
EARTH STRIP / WIRE / ROPE / CABLE - Supply, installing and testing of earthing strip/wire/rope/cable for completely making the eart hing grid system by supplying, laying the GI / Cu strip and making all the necessary welding joints, connecting to the earthing electrodes and existing earthing grid etc., complete as per drawings, specifications and directions of the Site engineer/Engineer -in-charge, including the cost of all labour, tools, materials, etc. complete in all respect:
25
2427
2057.21
EARTH STRIP / WIRE / ROPE / CABLE - Supply, installing and testing of earthing strip/wire/rope/cable for completely making the eart hing grid system by supplying, laying the GI / Cu strip and making all the necessary welding joints, connecting to the earthing electrodes and existing earthing grid etc., complete as per drawings, specifications and directions of the Site engineer/Engineer -in-charge, including the cost of all labour, tools, materials, etc. complete in all respect:
50
226
192.22
Supply, erection & installation of cable conduits made up of GI pipes of medium class 'B' subject to owner's approval in trenches (a lready made), on walls, concrete structure etc., including supply and installation of all the necessary pipe fittings such as bends, sockets, elbows, tees etc., bending, threading, binding, clamping, providings, spacers, plugs, packings, bushings etc., as required Job complete in all respects including the cost of all labour, tools, material etc. and as per specifications and directions of s ite engineer / Engineer-in-Charge:
40
1136
962.97
Supply, erection & installation of cable conduits made up of GI pipes of medium class 'B' subject to owner's approval in trenches (a lready made), on walls, concrete structure etc., including supply and installation of all the necessary pipe fittings such as bends, sockets, elbows, tees etc., bending, threading, binding, clamping, providings, spacers, plugs, packings, bushings etc., as required Job complete in all respects including the cost of all labour, tools, material etc. and as per specifications and directions of s ite engineer / Engineer-in-Charge:
40
2104
1783.48
Supply, fabrication, erection, installation of steel structural works of any type and shape such as cable raks, cable trays, push bu tton control posts etc., as required job complete in all respects including the cost of all labour, tools, material etc., complete. and as per specifications and directions of site engineer/ Engineer-in-Charge.
10
164
139.05
Supply and installation of shock treatment chart framed in good quality glass in English / Hindi / Local Language.
5
2568
2176.52
Supply and installation of vitreous enamel caution boards suitable for 440 V/11KV/6.6 KV as per IS 255 including fixing on the wall with all the required hardware etc. complete in English / Hindi/ Local Language.
5
2565
2174.02
Supply and installation of approved quality stainless steel name inscription plates including anodising, engraving the inscriptions, providing screws, etc. for equipments viz. motors, motor control centres, switchgears, push button stations etc. as required, provi ding necessary holes tapping etc. and fixing the same complete in all respect as per the direction of Site Engineer/Engineer-in-char ge including the cost of all labour, tools etc.
5
1181
1000.93
Supply and installation of approved quality plastic name inscription plates including engraving the inscriptions, providing screws , etc. for equipments viz. motors, motor control centres, switchgears, push button stations etc. as required, providing necessary ho les tapping etc. and fixing the same complete in all respect as per the direction of Site Engineer/Engineer-in-charge including the cost of all labour, tools etc.
5
960
813.67
Point wiring - Supplying, installation and testing with 1.5 Sq.mm stranded PVC insulated copper conductor wires for phase & neutral of 650V grade including earthing by providing 1.5 Sq.mm earth insulated continutity wire of copper in PVC conduit (Supply & installa tion of PVC conduit covered elsewhere in SOR) recessed on wall/ceiling/ false celing including supply & installation of switch boxes ,junction boxes, pull boxes, bushes, screws, check nuts, bends, modular switches and sockets . The circuit wiring with 4 Sq.mm PVC copper wire from D.B. to switchboard as required is also in the scope of the contractor:
1
1492
1264.51
Point wiring - Supplying, installation and testing with 1.5 Sq.mm stranded PVC insulated copper conductor wires for phase & neutral of 650V grade including earthing by providing 1.5 Sq.mm earth insulated continutity wire of copper in PVC conduit (Supply & installa tion of PVC conduit covered elsewhere in SOR) recessed on wall/ceiling/ false celing including supply & installation of switch boxes ,junction boxes, pull boxes, bushes, screws, check nuts, bends, modular switches and sockets . The circuit wiring with 4 Sq.mm PVC copper wire from D.B. to switchboard as required is also in the scope of the contractor:
1
1832
1552.67
Wiring with PVC insulated 2.5 sqmm copper conductor wire for fan points (1 fan point controlled by 1 modular switch) including provi ding space for electronic regulator in switch box, providing and fixing fan hook in the ceiling as per specifications and drawings.
1
2387
2023.54
Wiring with PVC insulated 2.5 sqmm copper conductor wire for phase & neutral , 650 V grade including earthing , the third pin with 1 .5 sqmm copper conductor earthing insulated continuity wire for exhaust/ wall bracket fan including providing and fixing of 5 pin 6 A modular socket and 10 A modular switch near the door or as as per specifications and drawings. The circuit wiring shall be with 4 sq. mm PVC copper wire from switchboard to 1st exhaust fan for multiple exhaust fans in one circuit.
1
2445
2072.07
Wiring for 250 V single phase and neutral 16 amps modular power plug point with PVC insulated 4 sq. mm. copper conductor wires for phase & neutral, 650 V grade including earthing, the third pin with 2.5 sq. mm copper conductor earthing insulated continuity wire, complete with providing and fixing of 6 pin 16/6A modular socket and 20/10 A modular switch (1 plug point per circuit) as per specif ications and drawings
1
3723
3155.41
Wiring for 250 V single phase and neutral 6 amps modular plug point with PVC insulated 2.5 sq. mm. copper conductor wires for phase & neutral, 650 V grade including earthing, the third pin with 1.5 sq. mm copper conductor earthing insulated continuity wire, comple te with providing and fixing of 5 pin 6A modular socket and 10 A modular switch (1 plug point per circuit) as per specifications and drawings.
1
2709
2296.23
Point wiring for power plug point with 4 sq.mm stranded PVC insulated copper wire including earthing the third pin with 2.5 sq. mm copper insulated earthing wire complete with supply and fixing of recessed mounted industrial type 3 pin 32 A metal clad socket and plug, 20A MCB (Motor duty) housed in a 16 gauge M.S. Box
1
4118
3490.43
Wiring for call bell points (1 call bell point controlled by 1 modular switch)in switch box including providing call bell / buzzer s uiable for single phase 230 V as per specifications and drawings.
2
1879
1593.21
Wiring for 250 V single phase and neutral 6 amps modular plug point with PVC insulated 2.5 sq. mm. copper conductor wires for phase & neutral, 650 V grade including earthing, the third pin with 1.5 sq. mm copper conductor earthing insulated continuity wire, comple te with providing and fixing of 3 numbers, 6 A 5 pin modular sockets and 10 A modular switches for UPS point as per specifications a nd drawings
7
2661
2255.89
PVC Conduit pipes - Supply, installation, fixing in position, PVC conduit pipes, of ISI marked , in concrete, brick work etc. during or after construction by making grooves in the wall, ceiling etc. cutting threads and jointing the pipes with PVC couplers, providi ng necessary tees, bends, junction boxes etc. with 12 SWG GI wire inside conduit without joint for concealed wiring, including makin g good the concrete, brick work, surfaces etc. complete as per drawings and direction of Site Engineer / Engineer-in-charge includin g cost of all labour, materials etc.:
50
128
108.67
PVC Conduit pipes - Supply, installation, fixing in position, PVC conduit pipes, of ISI marked , in concrete, brick work etc. during or after construction by making grooves in the wall, ceiling etc. cutting threads and jointing the pipes with PVC couplers, providi ng necessary tees, bends, junction boxes etc. with 12 SWG GI wire inside conduit without joint for concealed wiring, including makin g good the concrete, brick work, surfaces etc. complete as per drawings and direction of Site Engineer / Engineer-in-charge includin g cost of all labour, materials etc.:
50
218
185.18
Supplying and laying reinforced cement concrete light duty hume pipe, non pressure type (NP3), centrifugally cast conforming to I.S .458 with 1:3:6 concrete casing at joints as required with necessary slope including excavation, backfilling, supply of collars, jo inting of pipes with stiff mixture of cement mortar in the proportion of 1:2 ( 1 cement: 2 fine sand), testing of joints, complete i n all respects as per specifications, drawing and the direction of the EIC/Site Engineer:
20
1706
1446.36
Preparation & installation of corrosion coupon from owner supplied coated pipe. which involves preparation of sample of size 2"x4", application of pipeline coating material on the coupon, soldering 6 sq. mm. cable with coupon, sealing the soldered joint with epoxy , positioning the coupon at the pipe line depth and with in a distance of 0.5 M from the pipeline inclusive of cable & terminating t he cable in the TLP terminal. The corrosion coupons are to be installed with specified Test lead points for which prior approval to be obtained from Owner. The item also includes supply, installation / laying & termination of all XLPE, Cu cables of required length (as per site conditions) and size as mentioned in the standard drawings, toggle switch, cable glands and lugs etc., complete in all respect. All as per the direction and specification detailed in the document complete with tools, tackles & other necessary require ment for preparation of the coupon. The work complete in all respect shall include supply of all labour, tools etc complete as per t he directions of the Site Engineer and as per drawing no. 9200-99900-404-601-01 & 9200-99900-404-607-01.
1
2684
2275.21
Industrial LED Flood Light/High Mast Fixture, Rating: 350W
30
8649
7330.38
Supply of LED Panel recessed light 2 feet x2 feet with all fitting/fixtures as per technical specification- nominal 36W ( given by EIC)
10
1427
1209.95
Motors Upto and including 5 kW
4
2786
2361.74
Motors Above 20 kW and upto and including 50 kW
2
17334
14690.44
Overhauling of 1-ph AC / 3-ph AC / DC Electrical Motors of Voltage Grades up to 500V (AC/DC) and of ALL Makes/Types and of following capacities. Job includes a. Varnishing with Minimum 'F' Class ISI Marked Motor Varnishb. Stator baking to required temperaturec. Sleeving with sleev es on connection wires d. Repair/Replacement of new terminal plate, studs, bushings. etc.wherever necessary e. Replacement of bearings (DE & NDE), Oi l Seals and Greasing of Bearing f. Frame Painting using Red Oxide Primer (01 Coat) and Synthetic Enamel Paint (02 Coats)g Motor disconnection, r emoval, to and fro transportation of motor between site and overhauling workshop, re-installation, re-connection,testing, handing over i. All other act ivities required for overhauling of the motor All Materials, Labor, Tools, Equipment required for this item is in thescope of CONTRACTOR"
2
1863
1578.85
Overhauling of 1-ph AC / 3-ph AC / DC Electrical Motors of Voltage Grades up to 500V (AC/DC) and of ALL Makes/Types and of following capacities. Job includes a. Varnishing with Minimum 'F' Class ISI Marked Motor Varnishb. Stator baking to required temperaturec. Sleeving with sleev es on connection wires d. Repair/Replacement of new terminal plate, studs, bushings. etc.wherever necessary e. Replacement of bearings (DE & NDE), Oi l Seals and Greasing of Bearing f. Frame Painting using Red Oxide Primer (01 Coat) and Synthetic Enamel Paint (02 Coats)g Motor disconnection, r emoval, to and fro transportation of motor between site and overhauling workshop, re-installation, re-connection,testing, handing over i. All other act ivities required for overhauling of the motor All Materials, Labor, Tools, Equipment required for this item is in thescope of CONTRACTOR"
2
4467
3785.83
Supplying, providing and fixing MCCBs of following capacities, short circuit breaking capacities (SCBC) and poles inside existing pa nels ,boards ,Cubicles complete including drilling holes, making connections, removing the existing items, etc. :4P MCCB, SCBC upto 36 kA, Upto and including 200 Amps
2
8807
7464.11
Supply, fixing, termination, testing & commissioning of ISI mark HRC fuse links of following Ratings and all sizes and SCBC up to 10 0 kA,including making connections, removing the existing items, etc. :HRC Fuse up to and including 16 Amps
15
46
38.99
Supply, fixing, termination, testing & commissioning of ISI mark HRC fuse links of following Ratings and all sizes and SCBC up to 10 0 kA,including making connections, removing the existing items, etc.: HRC Fuse above 16 Amps and upto and including 80 Amps
30
125
106.5
Supply, fixing, termination, testing & commissioning of ISI mark HRC fuse links of following Ratings and all sizes and SCBC up to 10 0 kA,including making connections, removing the existing items, etc.:HRC Fuse above 80 Amps and upto and including 160 Amps
30
419
355.82
Supply, fixing, termination, testing & commissioning of ISI mark HRC fuse base and carrier of following Ratings and all sizes, inclu ding making connections, removing the existing items, etc.:HRC Fuse Base and Carrier up to and including 16 Amps
15
148
125.76
Supply, fixing, termination, testing & commissioning of ISI mark HRC fuse base and carrier of following Ratings and all sizes, inclu ding making connections, removing the existing items, etc.:HRC Fuse Base and Carrier above 16 Amps and upto and including 80 Amps
10
201
170.6
Supply, fixing, termination, testing & commissioning of ISI mark HRC fuse base and carrier of following Ratings and all sizes, inclu ding making connections, removing the existing items, etc.:HRC Fuse Base and Carrier above 80 Amps and upto and including 160 Amps
10
710
602.46
Red / Green / White / Amber Color Indicating Lamps
16
278
236.18
Yellow Color Indicating Lamps
16
454
385.58
Blue Color Indicating Lamps
16
602
510.83
Calliberation of Measuring equipments from NABL accrediated lab & submission of reports.Note: UoM is EA which is equal to calliberat ion of each equipment.
16
1577
1336.92
High mast servicing which includes but not limited to following: Replacement of contaminated Gear Oil ,general cleaning of gear box and its accessories,lowering and raising lantern carriage once for confirmation of operational status,checking of highmast,circuit f ault finding and rectification,replacement of electrical and mechanical spare parts all other misc
4
959
813.15
Temporary laying and fixing of LT power/ control/ telephone cable
-
-
-
Overall diameter upto 35 MM
500
27
23.68
Overall diameter greater than 35 MM but upto 55 MM
250
38
32.86
FOUR POLE RCCB Supplying and fixing following rating, four pole, (three phase and neutral) 63 Amp, 4 Pole RCCB, 100mA
8
3351
2839.89
OVERHAULING OF WINDOW AC, SPLIT AC, WATER COOLER ETC. Overhauling and painting of WAC,
20
1247
1056.91
Dismantling & shifting of Split Air Conditioning Unit 1.0TR / 1.5TR / 2.0TR capacity including indo
2
2253
1909.82
Installation of split type wall Mounted Air Conditioner indoor, outdoor unit fitted with rotary com
4
2323
1968.9
ADDITIONAL COPPER TUBE FOR SPLIT AC Supply & fixing of additional length of copper tube for split A
16
843
714.62
REPLACEMENT OF BURNT UNCUT COMPRESSOR Replacement of burnt uncut compressor of 1.5-ton capacity fro
6
16389
13889.26
GAS CHARGING OF AIR CONDITIONER UPTO Gas charging of air conditioner upto 1.5ton capacity with job
26
2346
1988.32
TELECOM & INSTRUMENTATION WORKS
-
-
-
Supply of Cable Glands - flame proof and weather proof including EP/WP certificates:
5
494
418.94
Supply of Cable Glands - flame proof and weather proof including EP/WP certificates:
5
314
266.41
Supply of Cable Glands - flame proof and weather proof including EP/WP certificates:
5
127
108.47
Supply of Plugs - flame proof and weather proof including EP/WP certificates:
5
90
77.05
Supply of Plugs - flame proof and weather proof including EP/WP certificates:
5
87
74.49
Supply of Plugs - flame proof and weather proof including EP/WP certificates:
5
43
36.65
Supply of Reducers - flame proof and weather proof including EP/WP certificates:
5
301
255.85
Supply of Reducers - flame proof and weather proof including EP/WP certificates:
5
350
297.35
Supply of Reducers - flame proof and weather proof including EP/WP certificates:
5
257
218.12
Supply of 2 Pair unarmoured Telephone Cable as per specifications
200
66
56.07
Supply of Cat 6 UTP (LAN) Networking Cable as per tender specifications
300
28
24.3
Supply of Duplex (2 port) Face plate (Network I/O point) (white/ cream colour) for Local Area Network including RJ45 I/O, modular pl ate & switch box/ gang box for fixing the face plate.
5
559
474.08
Supply of Wall mounted telephone socket outlet with 2 port telephone jack face plate (white/ cream colour) including RJ11 I/O. The i tem includes modular plate & switch box/ gang box for fixing the face plate.
5
403
342.13
Cable Laying - Laying of all type of cables LT (PVC / XLPE / Armoured/Unarmoured/Power/ Control/ Signalling) in trenches, in cable r acks, in trays, in protective pipes, poles, columns, in conduits, in panels and on structures etc.; including the supply and install ation of all required materials such as fixing clamps, screws, cable straps, tags, etc. as required (other than the supply of the co nduits, cables, pipes, cable racks, trays, poles, structures and panels) complete in all respect, including cost of all labour, tool s, consumable materials, etc. and cutting the cables in required lengths as per drawings, specification and directions of Site Engin eer / Engineer-in-Charge:
300
94
80.26
Cable Laying - Laying of all type of cables LT (PVC / XLPE / Armoured/Unarmoured/Power/ Control/ Signalling) in trenches, in cable r acks, in trays, in protective pipes, poles, columns, in conduits, in panels and on structures etc.; including the supply and install ation of all required materials such as fixing clamps, screws, cable straps, tags, etc. as required (other than the supply of the co nduits, cables, pipes, cable racks, trays, poles, structures and panels) complete in all respect, including cost of all labour, tool s, consumable materials, etc. and cutting the cables in required lengths as per drawings, specification and directions of Site Engin eer / Engineer-in-Charge:
300
107
91.26
Laying of HDPE Pipe in trenches/ walls/ concrete structure/ panels etc. as per specifications & drawings & blowing/ laying of Owner supplied Aurmoured/Unarmoured Optical Fibre Cable in HDPE pipe, carrying out end to end testing of laid Optical fibre cables by taki ng OTDR traces and submitting the OTDR trace printouts to Site Engineer/ Engineer-in-charge. The job includes the supply and install ation of required materials such as fixing clamps, screws, tags etc. as required to complete the job in all respects as per drawings and directions of Site Engineer/ Engineer-in-charge including cost of all labour, tools & tackles, test instruments, materials etc. The job includes handing over the tested cables to the Telecom Works Contractor and providing necessary assistance/ support to the Telecom Works Contractor in commissioning of Local Area Network.
150
264
223.88
Installation, laying of 2 Pair PVC insulated copper conductor un-armoured telephone cables in 16 mm/ 25 mm/ 32 mm PVC conduits from IDF through ceiling/ wall/trench and post-laying end to end testing of telephone cables. The job includes supply, installation, fixi ng of wall mounted telephone socket outlet with 2 port telephone jack face plate (white/ cream colour) including RJ11 I/O with modul ar plate & switch box/ gang box for fixing the face plate & accessories, supply and installation of PVC Conduits, all required mater ials such as fixing clamps, screws, cable straps, tags etc. as required complete in all respects as per specifications & scope of wo rk, drawings and directions of Site Engineer/ Engineer-in-charge including cost of all labour, tools & tackles, materials etc
200
122
103.45
Installation, laying of Cat 6 LAN Cables in 16 mm/ 25 mm/ 32 mm PVC conduits from network switch through ceiling/wall/trench and pos t-laying end to end testing of cables. The job includes supply, installation & fixing of Duplex (2 port) Face plate (Network I/O poi nt) (white/ cream colour) for Local Area Network including RJ45 I/O, modular plate & switch box/ gang box for fixing the face plate & accessories, supply and installation of PVC Conduits, all required materials such as fixing clamps, screws, cable straps, tags etc . as required complete in all respects as per specifications & scope of work, drawings and directions of Site Engineer/ Engineer-in- charge including cost of all labour, tools & tackles, materials etc.
200
173
146.91
CONSUMABLES
-
-
-
Consumables for House keeping activities
12
12830
10873
FIRE & SAFETY MAINTENANCE WORK
-
-
-
Maintenance and Inspection of DCP and CO2 fire extinguishers which includes checking the weight of cylinder, condition of threads of cap, discharge tube, sharpness of piercing pin and cylinder body,Refilling of DCP(owner supplied powder) if required and submission of reports.
-
-
-
9 kg DCP extinguisher
29
89
75.76
75 kg DCP extinguisher
1
92
78.37
2 KG Clean Agent extinguisher
32
79
67.02
4.5 kg CO2 extinguisher
13
96
81.8
Supply of CO2 & Refilling of CO2 gas in cartidges for using in 10kg DCP extinguishers including all & labour, transportation etc.. c omplete as per specification and direction of EIC/Site-Engineer.( CO2 CARTRIDGE OF 200 gms)
30
58
49.31
Hydrostatic testing of fire hoses at 9 Kg/ sq cm
220
58
49.86
Discharge hose with squeeze grip nozzle, hose should not burst or show leakage before 50Kgf/cm2
20
237
201.15
Safety clip ( metal) with nylon thread
20
17
14.74
DCP extinguisher cap washer
20
16
13.92
Discharge tube washer
20
6
5.24
Discharge hose (6.5mtr length) with shut off nozzle , hose should not burst or showleakage before 50Kgf/cm2
2
1487
1260.73
HDPE discharge horn for 4.5 Kg capacity CO2 extinguisher with fittings
15
279
236.74
High pressure discharge hose for 4.5 Kg CO2 extinguisher with fittings
20
442
374.59
CO2 valve open wheel
20
71
60.8
Safety pin with nylon string for CO2 extinguisher
20
30
26.11
Supply & fitting fire hydrant disc washer
20
42
36.42
Fire hydrant/ fire hose coupling washer
20
39
33.28
Supply & fitting of rubber beeding of the complete one hose box ( bothdoors) as per direction of EIC including removing of worn out rubber beeding,labour charges, tools & tackles etc.complete in all respect.
10
74
63.45
Supply & fitting of glass of hose box wherever required complete in all respect inclusive of material, labour,consumables etc.(Consi der rate for one door glass only)
10
66
55.97
Supply & fitting of glass of Manual Call Points wherever required complete in all respect inclusive of material, labour,consumables etc
6
26
22.29
Supply of hammer for breaking glass of Manual Call points / Hose boxes / Emergency tool box
2
100
85.27
Fixing up of clamps of extinguisher in wall including supply of clamps, screws etc and drilling, fitting extinguisher to complete th e work in all respect as per direction of EIC / site engineer
20
71
60.82
Supply & fitting of clamps for hanging 2Kg & 4.5Kg Co2 extinguisher on & wall including labour charges, tools tackles &consumables complete in all respect as per direction of EIC.
20
111
94.59
Supply & fitting of new wind sock( 0.9m dia & 1.8mtr length) made out of synthetic cloth & stand in flood light tower , buildings, a s per direction of site engineer/ EIC
6
1160
983.05
Checking of heat(6 Nos) and smoke detectors (35 Nos) installed in Control building, MCC rooms, cable trenches (using heat gun and Ae rosol supplied by Owner) in each quarter inclusive of labours tools tackles
4
3150
2669.73
Supply of Barricading tapes
20
705
597.48
Supply of wind indicating socks made out of polyester cloth. 1800 mm lond & 600 mm diameter and replacing the same in existing fitti ng. Colour Red 7 White band/ Red and yellow band
6
1211
1026.57
Supply of Dry chemical powder (DCP) as per IS: 4308 with ISI mark, suitable for DCP extinguishers
29
40
34.45
PPE
-
-
-
All the workers engaged by the contractor should be provided with PPE (helmet, 1 set of safety shoes & socks rain coat- & gumboot- 1 set, 2 sets of blue colour dress) per year to be given within 1 month from the start of the work.
12
3618
3066.77
RODENT & PEST CONTROL
-
-
-
Supply and Application of pesticides for Rodent Control as per Scope of Work mentioned in SCC.
15000
1
0.85
Supply, Mixing and Application of chemical for Lizard, Sanke Control Treatment/Cockroach/Fly and Mosquito/Spider web control and removal as per Scope of Work mentioned in SCC.
15000
-
0.68
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements