Indian Oil Corporation Limited Tender
For getting the details of etenders, if you are looking for information about them from the cumbersome government websites but are tired of doing so, Bidassist comes up with a one stop solution. It collates every Eproc telangana tender on Bidassist. One can approach it for the bidding process, registration process, etc., are explained below.
Indian Oil Corporation Limited - IOCL Tender
Machinery and Tools
Electrical and Electronics
Electrical Works
Eprocure
Opening Date8 Nov 2024
Closing Date29 Nov 2024
Tender AmountRefer Documents
Costs
EMD
₹ 3,14,228Document Cost
Refer DocumentsTender Fee
Refer Documents
Summary
System Design, Manufacturing, Testing, Supply, Installation And Commissioning Of Plant And Machinery Equipment, Electrical And Other Related Works For
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_BD_181815_1Tender No
BD/CONT/2024-25/042Tender Authority
Indian Oil Corporation Limited ViewPurchaser Address
-Website
http://iocletenders.nic.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
Bidders_help_Document_for_Preferencial_ Bidding_20230207_v1
Special_Instructions_to_the_Bidders_20230207_version_1a
BOQ Items
Supply of SS piping of 50 NB dia long with necessary bends and fittings for Process Piping with heat tracing and insulation
100
-
-
Supply of Quick Release Coupling set (male and female) for 50 mm ID suitable for SS piping & Flexible Chemical Hose
3
-
-
Supply of SS304 Flanges 50 NB size for Process Piping
24
-
-
Supply of SS304 Valves 50 NB Size for Process Piping
12
-
-
Supply of Steam Transfer Piping of 50 NB MS IBR seamless pipe with insulation and with necessary flanges and pipe fittings from one point to Hold Tanks
100
-
-
Supply of 50NB IBR valves for Steam Piping
4
-
-
Supply of CON. Reducer 50 x 40 NB, SS‐304L, #150
4
-
-
Supply of float type 25 NB Steam Traps
4
-
-
Supply of 80 KL Storage Tank for Oxidizer Phase (OP) of 4500 mm Dia X 5000 mm Straight Height. Material of Construction - SS304, Plate thickness - Shell 6 mm, top cover 5 mm and bottom plate 8 mm. Vertical, cylindrical, flat bottom, conical flanged top with supports welded with 75X75 X8 mm Angle Ring, The tank will be complete with 125 Mtrs, 40 NB SCH 40spiral SS304 coil, in two parts for necessary steam heating. It will also be completed with all necessary nozzle, drain, vent, support lugs, heat exchangers, insulated, liquid level transmitter having LCD display and suitable MS Ladder with railing at the top and Sampling Point having an arrangement of two valves for drawl of one liter of sample. The complete specifications and requirement will be as per the details mentioned in "Brief Scope of Work"
2
-
-
Supply of Electrical work – Laying of cable and electrical fixtures along with Cable tray, necessary support of structural steel and fixtures
200
-
-
Supply of SS piping of 50 NB dia long with necessary bends and fittings for Process Piping with heat tracing and insulation
150
-
-
Supply of Quick Release Coupling set (male and female) for 50 mm ID suitable for SS piping & Flexible Chemical Hose
3
-
-
Supply of SS304 Flanges 50 NB size for Process Piping
50
-
-
Supply of SS304 Valves 50 NB Size for Process Piping
6
-
-
Supply of Steam Transfer Piping of 50 NB MS IBR seamless pipe with insulation and with necessary flanges and pipe fittings from one point to Hold Tanks
150
-
-
Supply of 50NB IBR valves for Steam Piping
4
-
-
Supply of CON. Reducer 50 x 40 NB, SS‐304L, #150
4
-
-
Supply of float type 25 NB Steam Traps
8
-
-
Supply of 24 KL Storage & Blending Tank for Oxidizer Phase (OP) of ID of Tank: 3580mm, Tank wall thickness 6mm plus 50mm space for insulation material all around the tank, thus total OD of tank shall be approx. 3692mm X Height of Tank wall: 2600mm, plus channel support of 200mm at the tank base & top, thus total height of tank from floor level shall be 3000mm Straight Height. Tank Material of Construction - SS304. The complete specifications and requirement will be as per the details mentioned in "Brief Scope of Work"
4
-
-
Supply of SS304 Flanges 50 NB for above Process Piping
16
-
-
Supply of SS304 Valves 50 NB Size for above Process Piping
8
-
-
Supply of Electrical work – Laying of cable - approx. 3Ø power supply to electrical fixtures attached to Blend Tanks, Pumps and Boilers
80
-
-
Supply of flexible Chemical Hose for Oxidizer Phase unloading and transfer line - 50 mm ID, IS:7654 Type1 with quick release end fittings of BJ or any other suitable better make
80
-
-
Supply of Quick Release Coupling set (male and female) for 50 mm ID flexible chemical hose - of BJ Corporation Make or equivalent
8
-
-
Supply of Insulated Steam Transfer Piping of 25 NB MS IBR seamless pipe with flanges and pipe fittings for recovery of condensates
60
-
-
Supply of 40 NB IBR valves for Steam Piping
24
-
-
Supply of 25 NB IBR valves for Steam Piping
12
-
-
Supply of float type 25 NB Steam Traps
8
-
-
Supply of Steam Transfer Piping of 40 NB MS IBR seamless pipe with insulation and with necessary flanges and pipe fittings from supply line to the Blend tanks
150
-
-
Supply of Storage Tank (MOC-MS) of 40 KL capacity with additional provision for 5% air space , MOC-IS 2062, Size-3600 mm dia X 4000 St. Ht. . The tank will be vertical, cylindrical, flat bottom and conical top to be fabricated from IS 2062 quality plates. Shell & Top will be from 6 mm thk plates and bottom will be 8 mm thick. Complete with Steam Heating Coil of approx. 80 mtrs. of 25 NB SCH 10 MS Pipe Coil. The tank will be completed with necessary drain, vent etc. The Tank will be insulated by 50 mm thick glass wool pad, chicken mesh and cladding with Aluminium Sheet of 22 SWG along with suitable Ladder & Railing with MS structure with anticorrosive paint along with Walkway over the tanks by gratings/chequered Plate. Walkway of both tanks will be interconnected. 2 Nos. Lightning arrester with 2 Nos. Earth pit and suitable foundation. 2 Nos. Piston Valve 50 NB-2 Nos, Solenoid Actuated Valve 50 NB-4 Nos, Thermo Dynamic Steam Trap 25 NB-4 Nos, Globe Valve 25 NB-4 Nos,3 Way Actuator Operated Ball Valve 50 NB- 1 No, 2 Way Ball Valve 50 NB- 2Nos, Float Level Gauge-1 no, Temperature Transmitter -2 nos., Digital Temperature Controller-2 nos., Temperature Indicator (dial)- 2 nos., Digital Mass Flow Meter -2 Nos., Batcher unit along with control panel and totalizer for both the tanks as per detailed scope of work.
2
-
-
Supply of oil pipe - 80 NB Dia, MS pipe along with necessary valves and fitting and strainers for unloading of Furnace oil tankers
40
-
-
Supply of gear pump of capacity 300 LPM with flame proof motor with suction and discharge port of 2"
2
-
-
Supply of oil pipe- 2" Dia, MS along with 04Nos. valves and fitting with heat tracing and insulation
200
-
-
Supply of Steam Transfer Piping of 50 NB MS IBR seamless pipe with insulation and with necessary flanges and pipe fittings
100
-
-
Supply of 50NB IBR valves for Steam Piping
8
-
-
Supply of Insulated Steam Transfer Piping of 25NB MS pipe with flanges and pipe fittings for condensate
40
-
-
Supply of 25NB IBR valves for Steam Piping
6
-
-
Supply of float type 25 NB Steam Traps
4
-
-
MOTOR STARTER PANEL/BOX (3-Ph,50Hz,415V, Rated Current 20A, S.C Current 50KA, 1 Sec MCC with IP54 protection, Starter Rating 10HP DOL, consisting with MCCB/MPCB, Contactor, O/L Relay, On/Off/Trip Indication, Start/Stop PB, 1No. MCB as per Type -2 Co ordination Selection) (Specification: Wall/ Structure mounting, non-compartmentalizing type, constructed with 2/1.6mm thick CRCA Sheet, with Powder coated panting shade: RAL 7035) - L&T/SIEMENS/Standard make and will be feed from Existing Electrical Panel.
2
-
-
Cable 1100V Grade Multi strand Armoured Cable as per IS:7098 (Part-1)/1988 along with Cable Gland Double compression type and Cable Lug (Aluminium) as per site requirement - 4CX16 Sq mm. Al. XLPE CABLE
150
-
-
Supply of Fuel Phase (FP) Blend Tank, 2.5 KL capacity, 1350 mm Dia X 1800 mm height, Material of Construction - IS 2062, Plate thickness - Shell and top 5 mm, Bottom dish 6 mm, the blend tank will be vertical, cylindrical, dished bottom, flat flanged top, complete with 20 m, 25 NB SCH 40 spiral coil, 50 mm Dia shaft along with pitch blade turbine agitator, with all necessary nozzle drain, vent, support legs & ladder and 2 HP TEFC, IP 55 motor and Suitable Gear Box for driving turbine agitator and load cell with least count of 1 kg and max net weight carrying capacity of 3000 kg. Supply of Temperature controller with suitable arrangement to maintain temperature of fuel phase in the range of 40-60° C, Piston Valve 25 NB-2 Nos,Solenoid Actuated Valve 25 NB-2 Nos,Thermo Dynamic Steam Trap 20 NB-2 Nos,Globe Valve 20 NB-2 Nos,2 Way Ball Valve 25 NB- 2Nos, 3 Way Ball Valve 20 NB- 2Nos,Disc Check Valve20 NB- 2Nos
3
-
-
Supply of Basket Strainer for Oxidiser Phase, 75 Ltrs capacity, Make of Construction - Vessel SS 304 and Jacket IS 2062, Vessel Shell 5 mm, bottom dish 6 mm, top plate 6 mm, jacket shell 5 mm, dish 6 mm, the strainer will be vertical, cylindrical, dished bottom, flat flanged top jacketed vessel complete with perforated strainer with 18 mesh SS filter cloth, inlet/outlet nozzle, drain etc.
4
-
-
Supply of Basket strainer for Fuel Phase - 50 Ltrs capacity, material of construction MS, plate thickness - vessel shell 5 mm, bottom dish 6 mm, top plate 6 mm, jacket shell 5 mm, dish 6 mm, the strainer will be vertical, cylindrical, dish bottom, flat flanged top, jacketed vessel complete with perforated strainer with 18mesh SS filter cloth, inlet/outlet nozzle, drain etc.
3
-
-
Supply of Close Coupled Screw Pump, RMAB 601 of make Roto Pumps Ltd or any other suitable better make for transferring Oxidizer Phase to Blender and 7.5 HP TEFC, FLP, IP 55 motor with suitable Gear Box and Coupling and base plate
2
-
-
Supply of Closed Coupled Screw Pump, RDAA 492 of make Roto Pumps Ltd or any other suitable better make / Gear Pump for transferring Fuel Phase to Blender and 2.0 HP TEFC, FLP, IP 55 motor with suitable Gear Box and Coupling and base plate.
2
-
-
Supply of Emulsion Blender of 150 Kg/min capacity, 208 mm O/D X 458 mm Long, Material of Construction - Body of Aluminium 8 mm, Rod 9.5 mm, Rotating shaft SS 410, 28.5 mm Dia, Blades SS 410, 5 mm thick, Blender will be Horizontal cylindrical complete with series of pin and rotating shaft complete with shear blades, end bearing with seals and 25 HP TEFC, FLP, IP 55 motor with Coupling base plate
2
-
-
Supply of Control Panel comprising of variable frequency drive (VFD) panel consisting of Danfoss or equivalent make frequency converter suitable for three phase 415 Volts motor of following capacity a) 7.5 HP, b) 2.0 HP, c) 25 HP, d) 7.5 HP along with RPM indicators
2
-
-
Supply of digital Mass flow meter of body SS-304 equivalent to Krohne Marshall for OB (Flow Range 60-150 LPM size 2”)
2
-
-
Supply of digital Mass flow meter of body SS-304 equivalent to Krohne Marshall for for FB (Flow Range 5-20 LPM size 1”)
2
-
-
Supply of Close Coupled Screw Pump- WMAA 602 of Roto Pumps Ltd or any other suitable better make for transfer of Emulsion Matrix from Product Pump to Silo and 7.5 HP TEFC, FLP, IP 55 motor with suitable gear box and coupling and base plate
2
-
-
Supply of Control Panel along with Safety Device Units (Pressure transducer, High Temperature and Pressure digital display cum safety cut-off system & pressure gauge, Rupture disc) for Emulsion Transfer Pump
2
-
-
Supply of flexible Chemical Hose for Oxidizer Phase unloading and transfer line - 50 mm ID, IS:7654 Type1 with quick release end fittings of BJ or any other suitable better make
80
-
-
Supply of Fuel Phase transfer pipe line along with required flanges, bends, nut & bolts, gaskets etc.of 25 NB, SCH 10, Material of construction MS as per site requirement
50
-
-
Supply of flexible Chemical Hose for Oxidizer Phase unloading and transfer line - 25 mm ID, IS:7654 Type1 with quick release end fittings of BJ or any other suitable better make
40
-
-
Supply of pipeline (Oxidizer Phase filter - OB Screw Pump) along with required flanges, bends, nut & bolts, gaskets etc. of 50 NB, SCH 10, Material of construction SS 304 as per site requirement.
50
-
-
Supply of 50 NB SS-304 (Three piece Design) Ball Valve cf8 grade with Flange Fittings class 150 (With Nut & Bolt and Gaskets)
8
-
-
Supply of 25 NB SS-304 (Three piece Design) Three Way Ball Valve cf8 grade with Flange Fittings class 150 (with Nut & Bolt and Gaskets)
2
-
-
Supply of flexible Chemical Hose for Oxidizer Phase - Flow Meter - Blender line - 50 mm ID, IS:7654 Type1 with quick release end fittings of BJ or any other suitable better make of length 2 mtr.
4
-
-
Supply of 1.0 inch flexible hose (Fuel Phase - Flow Meter - Blender) of Gates make or equivalent with both ends fitted with quick coupler of BJ or any other suitable better make with NRV of 2 mtr.
4
-
-
Supply of Emulsion Matrix transfer pipeline from Blender to Silo along with required flanges, bends, nut & bolts, gaskets etc.of 50 NB, SCH 10 MOC- SS304
36
-
-
Supply of Quick Release Coupling set (male and female) for fixing 50 mm ID transfer hoses - of BJ Corporation Make or equivalent
6
-
-
Supply of Gear Pump of capacity 300 LPM with flame proof motor with suction and discharge port of 2" for preparation of Fuel Phase, base plate, suitable hopper, starter /panel (as per site condition)
1
-
-
Supply of Furnace oil / Fuel Phase pipe- 2" Dia, MS along with necessary fitting & 04 Nos of Valves and insulation along with necessary supports, hooks and grouting etc
36
-
-
Supply of Silo for Storage of Emulsion Matrix of 30 KL (40T) capacity, MOC-IS 2062, Size-3000 mm dia X 4000 mm height X 750 mm conical height, Silo will be vertical, cylindrical, conical bottom and top complete with all necessary nozzle, vent, support bracket, with suitable platform with ladder to access the various inlets/outlets at the top of the silo along with insulation of 50 mm thick glass wool pad, chicken mesh and cladding with Aluminium Sheet of 22 SWG with Epoxy paint inside Silo, 3 Way Ball Valve 125 NB-2Nos., Butterfly Valve Actuator Operated 65 NB-1No.
2
-
-
Supply of Digital Load Cells (Mettler Toledo make) for Silo
2
-
-
Supply of Screw Pump - WMAA 602 of Roto Pumps Ltd make with No Flow switch 7.5 HP TEFC, IP 55 , FLP motor with suitable gear box , coupling base plate , Motor Starter & cable (Approx 65 M each)
4
-
-
Supply of Control Panel along with Safety Device Units (High Pressure, Low Pressure switches, High Temperature Cut-off switch & pressure gauge, Rupture disc) for Emulsion Transfer Pump as per the given scope of work
2
-
-
Supply of 2.5 inch ID flexible hose of Gates make or equivalent with both ends fitted with quick coupler of BJ make
20
-
-
Supply of Emulsion Matrix transfer line from Hopper of Screw pump to Pump Trucks and Emulsion Tanker to Silo - 50 NB SCH 10 SS 304
36
-
-
Supply of SS 304 Flanges 50 NB for above Process Piping
12
-
-
Supply of 50 NB SS-304 (Three piece Design) Ball Valve cf8 grade with Flange Fittings class 150 (With Nut & Bolt and Gaskets)
6
-
-
Supply of 50 NB SS-304 Three way Ball Valve with Flange Fittings class 150 (With Nut & Bolt and Gaskets)
4
-
-
Supply of Quick Release Coupling set (male and female) for 50 mm ID flexible chemical hose - of BJ Corporation Make or equivalent along with suitable 1 no. Dust Cap
6
-
-
Supply of FO Fired Boiler Unit RXD-850 (850 kg/hr) working pressure of 10.54 kg/cm2 with Economizer of Thermax make only
3
-
-
Supply of Softner EZ30 of Thermax make only
1
-
-
Supply of Filter EZ40 FDM of Thermax make only
1
-
-
Supply of Oxidation Chamber- E Z200C of Thermax make only
1
-
-
Supply of Mild Steel Chimney (self supported) of 300 mm top diameter and 25 Mtrs height (approx) along with flue gas duct with supporting structure, sampling collection point, platform for collection & spiral stairs and ladder with railing and protection up to collection point and ladder from collection point to top - to cater 2 nos of 850 Kg/Hr Boilers including duct piping from Boilers to Chimney, Lightning arrester and light indicator over Chimney with 2 Nos. Earth pit and suitable foundation
2
-
-
Supply of Pressure reducing station, Range- In let pressure 10.54 kg/cm2, Out let pressure 3.5 kg/cm2 Max, Steam flow-Max. 3000 kg/hr, Body-C.S, Inlet size-80mm, outlet-100mm with cast steel valve PRV size 50mm Flange Class ASA 150
2
-
-
Supply of MS Day Tank for FO - 3 KL capacity (round tank with 5 mm plate) with level indicator, 2 nos of 6KW heaters along with temp. controller and cut off switch along with MS piping from Day Tank to Boilers
1
-
-
Supply of HDPE Day Tanks for Soft Water of 10 KL capacity each, along with MS piping from Day Tank to Boilers
2
-
-
Supply of Insulated Steam Header Piping 6" MS IBR seamless pipe thickness 8mm with airvent, pressure relief, safety valve, pressure gauge and draining of steam condensate through steam trap, 2 nos outlet for 2 nos PRS with provision of suitable length with flanges and pipe fittings along with NRV 4 nos in between Boiler output and steam header with necessary bend and fittings for catering steam output from 2 nos Boilers 850 kg/hr each and 5 nos more points for future expansion in same header (with a provision for up gradation to 6000 Kg/Hr)
1
-
-
Supply of Steam Transfer Piping of 50 NB MS IBR seamless pipe with insulation and with necessary flanges and pipe fittings from Boiler outlet/steam header to PRS to Blend Tanks
120
-
-
Supply of Insulated Steam Transfer Piping of 80NB MS pipe with flanges and pipe fittings for recovery of condensate from Blend tanks to condensate recovery tank
80
-
-
Supply of Insulated Steam Transfer Piping of 25NB MS pipe with flanges and pipe fittings for steam supply / condensate collection
45
-
-
Supply of 50NB IBR valves for Steam Piping
18
-
-
Supply of 25NB IBR valves for Steam Piping
12
-
-
Supply of float type 25 NB Steam Traps
12
-
-
Supply of water pipeline - 2" Dia, GI, class B along with necessary valves and fittings as per site requirement
350
-
-
Supply of water pipeline - 1" Dia, GI, class B along with necessary valves and fittings as per site requirement
200
-
-
Supply of Furnace Oil pipeline - 2 " Dia, MS along with necessary valves, and fitting with heat tracing and insulation
200
-
-
Supply of Furnace Oil pipeline - 1" Dia, MS along with necessary valves, and fitting with heat tracing and insulation
40
-
-
Supply of Monoblock Pump 2HP, Connection Size 2" for delivery up to height approx 40 feet - reputed make like Kirloskar/KSB or equivalent
3
-
-
Supply of BOILER AREA MCC PANEL (3-Ph,50Hz,415V,Rated Current 250A, S.C Current 50KA, 1 Sec MCC with IP54 protection with Aluminium Bus Bar consisting of following feeders, MCC/PDB (I/C Feeders are consisting of Ammeter, Voltmeter with S/S, CT, R/Y/B & on/off Indication and O/G with on/off indication, All Motor Feeders consisting with MCCB/MPCB, Contactor, O/L Relay {as per Type 2 Coordination}, On/Off/Trip Indication, Local/Remote S/S, Start/Stop PB, 1No. MCB) (L&T, SIEMENS/equivalent) (The Panel will be Floor mounting, Free Standing, compartmentalizing type, constructed with 2/1.6mm thick CRCA Sheet, IP:54 with Powder coated panting shade: RAL 7035) (Make of MCCB/MPCB, Contactor, O/L Relay, MCB : L&T/SIEMENS/Equivalent, LED Indication Lamp/ PB/ SS : Siemens/ Teknic/ Kaycee/ Equivalent, MFM : Schneider/ Equivalent, Ameter/ Voltmeter : AE/ Rishabh / Equivalent) (i) Incoming Feeders - 250 A TP + N, MCCB with O/C, S/C Protection, Extended Rotary Handle, Aux. Contact - 1 no. (Make-L&T/SIEMENS/Equivalent).
(ii) Outgoing feeders - (a) 32A TPN MCB for New Boiler FO Fired 850Kg/Hr Boiler - 4 nos. (b) 6KW Heater Feeder (32A TP MCB, Contactor and Temperature Controller for Heater for FO Pre-heating - 4 nos. (c) 2HP DOL Motor Starter Feeder for Mono-Block Pump - 4 nos. (d) Lighting Feeder (Consisting of - 6Nos. 16A DP MCB) - 1no. (Make-L&T/SIEMENS/Equivalent) (iii) Supply of separate 1 no. 250A MCCB for Main MCC Panel
1
-
-
Supply of 3.5 core 120 sq mm XLPE insulated & PVC sheathed aluminium conductor armoured U.G. power cable of 1100 V grade conforming to IS 7098 (part I) along with cable gland double compression type and cable lug (aluminium) as per site requirement
140
-
-
Supply of 4 core 10 sq mm XLPE insulated & PVC sheathed aluminium conductor armoured U.G. power cable of 1100 V grade conforming to IS 7098 (part I) along with cable gland double compression type and cable lug (aluminium) as per site requirement
120
-
-
Supply of 3 core 2.5 sq mm PVC insulated & PVC sheathed copper conductor unarmoured submersible flat power cable of 1100 V grade conforming to IS 8130 along with cable end termination and cable lug (copper) as per site requirement
100
-
-
Supply of Electrical Mono Rail Hoist including all accessories, electrical and civil work complete in all respect suitable for lifting of Boiler coils and accessories having flame proof motor.
1
-
-
Design & Supply of Single Roll Crusher of capacity 15-16 MT/Hr for crushing High Density Ammonium Nitrate Lumps (bag size) 750 mm x 500 mm x 250 mm with opening of the Crusher 900 mm (approx) x 550 mm (approx) and output size 40 mm approx along with suitable drive and motor and starting panel and supply cable and necessary safety features including providing of suitable civil & structural foundation and suitable placement of tail end of the Conveyor and support system along with charge hopper above the Crusher Opening and platform for keeping pallets of HDAN and space for manual charging of bags in to Crusher as per the details mentioned in scope of work.
1
-
-
Design & Supply of High Density Ammonium Nitrate conveying system through a Belt Conveyor of width 800-1000 mm & CD of approx 35-40 m along with skirting arrangement on both edges of the Conveyor and suitable drive, motor, starting panel and supply cable and necessary safety features along with 4 nos. discharge points / ploughs for feeding 4 nos. Blend Tanks falling in the discharge zone of around 20m. (The tanks are of dia 3692 mm-OD with a centre to centre gap of 5000 mm between the Tanks) with total lift requirement of around 3m from tail end to discharge zone including providing of suitable Civil & Structural foundation for supporting the Conveyor System along with side walk ways as per the details mentioned in brief scope of work.
1
-
-
Design, Procurement, Manufacturing, Testing & Supply of 50 KL MS Tank 3500 mm dia x 5250 mm height with accessories as per the details mentioned in scope of work.
1
-
-
Supply of Diesel operated Pump set complete in all respect i.e. comprising pump, motor of 1450 rpm, Pin Bush type coupling, coupling guard, common base frame, cushy foot mounting, and foundation. a) Fire Pump of capacity 2280 LPM – (137 M3/Hr) (Make-Kirloskar/KSB/Greaves or equivalent)
1
-
-
Supply of Pump set complete in all respect i.e. comprising pump, motor of 1450 rpm, Pin Bush type coupling, coupling guard, common base frame, cushy foot mounting, and foundation. b) Jockey Pump of Capacity 180 LPM. (Make-Kirloskar/KSB/Greaves equivalent)
1
-
-
Supply of Pressure Switch with guide valve and pressure damper including necessary fitting.
2
-
-
Supply of Combined Starting Panel for above four nos. pump set, with Star-Delta type starter for Fire Pump & D.O.L. type starter for Jockey Pump.
1
-
-
Supply of Pressure Gauge (100mm dia & 0 to 15 Kg / Sq.cm) with Guide Valve and pressure damper including necessary fittings.
3
-
-
Supply of single headed oblique type Hydrant Valve (Alloy Steel) as per IS: 5290 with PVC blank cap.
15
-
-
Supply of water Monitor as per IS: 8442 in the fire hydrant line
2
-
-
Supply of 4-way breeching inlet as per IS: 904 in the fire hydrant line.
1
-
-
Supply of 63mm X 15 Mtr. long Hose as per IS: 8423, bounded with pair of Steel Coupling as per IS: 903.
30
-
-
Supply of front glassed single door powder coated M.S.Hose Box (16 X 18 Swg) of standard design to accommodate one Branch Pipe with nozzle and 2 lengths of 63mm X 15 Mtr. long Hose.
15
-
-
Supply of C.I. Flanged Gate Valve as per IS: 14846, PN 1.6 of 100mm NB
2
-
-
Supply of C.I. Flanged Non Return Valve as per IS: 5312, PN 1.6 of 100mm NB
1
-
-
Supply of aboveground/underground M.S. piping conforming to IS: 1239 / 3589 with fitting, support, clamp and treatment on outer surface by one coat of primer & two coats of synthetic enamel red paint/one wrap of anticorrosive tape for 100mm NB,M.S., Medium(Schedule 40) with suitable flange and fittings for connection.
450
-
-
Supply of Aluminium Armoured Cable for supply to panel (Size – 3C X 95 Sq. mm.)
200
-
-
Supply of Aluminium Armoured Cable for supply panel to motor (Size – 3C X 50 Sq. mm.)
50
-
-
Supply of Mono block pump set to fill the Water Tank (Pump rating – 1 HP, 2900 rpm, single phase, 220 V) including base frame and protection shed
1
-
-
Supply of GI pipe for water tank inlet pipeline 1”
200
-
-
Supply of 300 Ltr. SS Kettle with agitator with Ball Valve 40 NB- 2Nos, Ball Valve 25 NB- 2Nos
2
-
-
Supply of monoblock pump MOC-SS304, Capacity 2Hp Suitable for transfer of GA and water
2
-
-
Supply of 25 NB pipe, MOC SS 304 necessary nozzel, bend , valve etc
18
-
-
Supply of HDPE Day Tanks of 5 KL capacity (For Gassing Agent and Water)
2
-
-
Supply of 11/0.433KV, 315KVA, Current Primary 16.53 A, Secondary: 420 A, Vector Group: Dyn11, Tap Changing by off ckt off load tap switch, ONAN type, winding copper Transformer 1-No. outdoor type, Suitable cable Box with bushing, as per IS-2026 with 1. Oil conservator with filler cap & drain plug, plain oil level gauge. 2. Air release valve. 3. Silica gel breather. 4. Filter valve. 5. Explosion vent. 6. Thermometer pocket. 7. Drain valve, 8. Lifting lugs.9. Cover lifting eyes. 10. Bi-directional rollers. 11. Rating & terminal marking plate. 12. Inspection hole with cover. 13.Terminal marking plate. 14. Marshalling Box, 15. Ist filling of oil. 16.Oil temp indicator plain type. 17. Off ckt off load tap changing switch. (Make : TRUVOLT / KIRLOSKAR / Equivalent)
1
-
-
3-Ph,50Hz,415V, Rated Current 800A, S.C. Current 16/25/50KA, 1 Sec MCC (MAIN MCC IN MCC ROOM ( Panel 1) with IP54 protection with Aluminium Bus Bar consisting of following feeders, MCC/PDB (I/C feeders are consisting of Digital Ammeter, Digital Voltmeter , C/T, MFM, R/Y/B & on/off indication and O/G with on/off/trip Indication ) (L&T/SIEMENS/Equivalnt) (Floor mounting, Free Standing, compartmentalizing type, constructed with 2/1.6mm thick CRCA Sheet, with powder coated panting shade : RAL 7035) a) Incoming Feeders - 800A, 4P 50KA MDO ACB with microprossor based released - 2 no.( I/C from 315KVA Transformer & I/C from D.G set). b) Bus coupler Feeders - 800A, 4P, 50KA MDO ACB with microprossor based released - 1no., c) Outgoing feeders - 630A TP, MCCB with O/C, S/C Protection (microprossor), Extended Rotary Handle, AUX. & trip alarm Contact- 2 Nos, & 400A TP, MCCB with O/C, S/C Protection (microprossor), Extended Rotary Handle, AUX. & trip alarm Contact- 3 Nos, & 160A TP, MCCB with O/C, S/C Protection (microprossor), Extended Rotary Handle, AUX. & trip alarm Contact- 3 Nos & 100A TP, MCCB with O/C, S/C Protection (microprossor), Extended Rotary Handle, AUX. & trip alarm Contact- 1 No. & 63A TP, MCCB with O/C, S/C Protection (microprossor), Extended Rotary Handle, AUX. & trip alarm Contact- 2 Nos. & 32A TP, MCCB with O/C, S/C Protection (thermal magnetic), Extended Rotary Handle, AUX. & trip alarm Contact- 1 No.
1
-
-
3-Ph,50Hz,440V, 260 KVAR CAPACITOR PANEL (Panel 8) IN MCC ROOM with IP54 protection with Aluminium Bus Bar consisting of following feeders, (L&T/SIEMENS/Equivalnt) (Floor mounting, Free Standing compartmentalizing type, constructed with 2/1.6mm thick CRCA Sheet, with powder coated panting shade : RAL 7035) a)Incoming Feeders - 630A, TP 50KA MCCB with Extended Rotary Handle - 1 no. b) Outgoing feeders - 50KVAR - 4 Nos, 25KVAR- 1 No., 15KVAR - 1 No., 10KVAR - 1 No., 5KVAR - 1 No. (The Capacitor Panel will be with 7 Stage Automatic Power Factor Correction Relay and auto/manual provision and each bank feeder consist with Suitable rated fuse, Capacitor Duty Contactor, Push Button, LED Indication Lamp, Timer etc.
1
-
-
BOILER AREA MCC (Panel 2) (3-Ph, 50Hz,415V, Rated Current 160A, S.C. Current 16/25/50KA, 1 Sec MCC with IP54 Protection with Aluminium Bus Bar consisting of following feeders, MCC/PDB (I/C feeders are consisting of Digital Ammeter, Digital Voltmeter, CT, R/Y/B & on/off/trip Indication and O/G with on/off/trip indication, All Motor Feeders consisting with MCCB/MPCB, Contactor, O/L Relay, On/Off/Trip Indication, Local/Remote S/S, Start/Stop PB, 1No. MCB) (L&T, SIEMENS/ Equivalent) (Floor mounting, Free Standing, Compartmentalizing type, constructed with 2/1.6mm thick CRCA sheet, with Power coated panting shade: RAL 7035) a) Incoming Feeders - 160A 50 KA 4 pole, MCCB with O/C, S/C Protection ( thermal magnetic), Extended Rotary Handle, Aux. Contact- 1 no, b) Outgoing feeders - 16A 50 KA 4 pole, MCCB with O/C, S/C Protection ( thermal magnetic), Extended Rotary Handle, Aux. Contact- 6 nos & 32A 50 KA 3 pole, MCCB with O/C, S/C Protection ( thermal magnetic), Extended Rotary Handle, Aux. Contact- 6 nos for Lighting Feeder.
1
-
-
PROCESS AREA - I MCC ( Panel 3) (3-Ph, 50Hz,415V, Rated Current 400A S.C. Current 16/25/50KA, 1 Sec MCC With IP54 protection with Aluminium Bus Bar consisting of following feeders, MCC/PDB (I/C Feeders are consisting of Digital Ammeter, Digital Voltmeter , CT, R/Y/B & on/off/trip Indication and O/G with on/off/trip indication, All Motor Feeders consisting with MCCB/MPCB, Contactor, O/L Relay, On/Off/Trip Indication, Local/Remote S/S, Start/Stop PB, 1No MCB) (L&T, SIEMENS/Equivalent) (Floor mounting, Free Standing, Compartmentalizing type, constructed with 2/1.6mm thick CRCA sheet, with Power coated panring shade: RAL 7035) a) Incoming Feeders - 400A, 4P, MCCB with O/C, S/C Protection (microprocessor), Extended Rotary Handle, Aux. Contact - 1No. b) Outgoing feeders- 15 KW Star/Dalta Motor Starter Feeder - 6 nos. & 7.5 KW Star/Delta Motor Starter Feeder - 9 nos., 125 A 3 Pole 50 KA MCCB with thermal magnetic realease- 2 nos. & 32 A 3 Pole 50 KA MCCB with thermal magnetic realease- 2 nos for Lighting Feeder.
1
-
-
PROCESS AREA - 2 MCC ( Panel 4) (3-Ph, 50Hz,415V, Rated Current 400A S.C. Current 16/25/50KA, 1 Sec MCC With IP54 protection with Aluminium Bus Bar consisting of following feeders, MCC/PDB (I/C Feeders are consisting of Digital Ammeter, Digital Voltmeter , CT, R/Y/B & on/off/trip Indication and O/G with on/off/trip indication, All Motor Feeders consisting with MCCB/MPCB, Contactor, O/L Relay, On/Off/Trip Indication, Local/Remote S/S, Start/Stop PB, 1No MCB) (L&T, SIEMENS/Equivalent) (Floor mounting, Free Standing, Compartmentalizing type, constructed with 2/1.6mm thick CRCA sheet, with Power coated panring shade: RAL 7035) a) Incoming Feeders - 400A, 4P, MCCB with O/C, S/C Protection (microprocessor), Extended Rotary Handle, Aux. Contact - 1No. b) Outgoing feeders- 7.5 KW Star/Dalta Motor Starter Feeder - 9 nos., 5.5 KW DOL Motor Starter Feeder - 3 nos., 3.7 KW DOL Motor Starter Feeder - 7 nos., 2.2 KW DOL Motor Starter Feeder - 4 nos., 1.5 KW DOL Motor Starter Feeder - 9 nos., 100 A 3 Pole 50 KA MCCB with thermal magnetic realease- 3 nos. & 32 A 3 Pole 50 KA MCCB with thermal magnetic realease- 5 nos for Lighting Feeder.
1
-
-
Fire pump and repair shop Panel MCC ( Panel 5) (3-Ph, 50Hz, 415V, Rated Current 400A S.C. Current 16/25/50KA, 1 Sec MCC With IP54 protection with Aluminium Bus Bar consisting of following feeders, MCC/PDB (I/C Feeders are consisting of Digital Ammeter, Digital Voltmeter , CT, R/Y/B & on/off/trip Indication and O/G with on/off/trip indication, All Motor Feeders consisting with MCCB/MPCB, Contactor, O/L Relay, On/Off/Trip Indication, Local/Remote S/S, Start/Stop PB, 1No MCB) (L&T, SIEMENS/Equivalent) (Wall / Floor mounting, Free Standing, Compartmentalizing type, constructed with 2/1.6mm thick CRCA sheet, with Power coated panring shade: RAL 7035) a) Incoming Feeders - 160A, 4P, MCCB with O/C, S/C Protection (thermal magnetic), Extended Rotary Handle, Aux. Contact - 1No. b) Outgoing feeders- 37 KW Star/Dalta Motor Starter Feeder - 2 nos., 5.5 KW DOL Motor Starter Feeder - 3 nos., 125 A 3 Pole 50 KA MCCB with thermal magnetic realease- 2 nos. & 6 A SPMCB- 2 nos for Lighting Feeder.
1
-
-
Office Area Utility Panel ( Panel 6) (3-Ph, 50Hz, 415V, Rated Current 400A S.C. Current 16/25/50KA, 1 Sec MCC With IP54 protection with Aluminium Bus Bar consisting of following feeders, MCC/PDB (I/C Feeders are consisting of Digital Ammeter, Digital Voltmeter , CT, R/Y/B & on/off/trip Indication and O/G with on/off/trip indication, All Motor Feeders consisting with MCCB/MPCB, Contactor, O/L Relay, On/Off/Trip Indication, Local/Remote S/S, Start/Stop PB, 1No MCB) (L&T, SIEMENS/Equivalent) (Wall / Floor mounting, Free Standing, Compartmentalizing type, constructed with 2/1.6mm thick CRCA sheet, with Power coated panring shade: RAL 7035) a) Incoming Feeders - 100A, 50 KA, 4P, MCCB with O/C, S/C Protection (thermal magnetic), Extended Rotary Handle, Aux. Contact - 1No. b) Outgoing feeders- 63 A 3 Pole 50 KA MCCB with thermal magnetic realease- 2 nos. & 32 A 3 Pole 50 KA MCCB with thermal magnetic realease- 2 nos. for Lighting Feeder.
1
-
-
Repair Shop Panel ( Panel 7) (3-Ph, 50Hz, 415V, Rated Current 63A S.C. Current 16/25/50KA, 1 Sec MCC With IP54 protection with Aluminium Bus Bar consisting of following feeders, MCC/PDB (I/C Feeders are consisting of Digital Ammeter, Digital Voltmeter , CT, R/Y/B & on/off/trip Indication and O/G with on/off/trip indication, All Motor Feeders consisting with MCCB/MPCB, Contactor, O/L Relay, On/Off/Trip Indication, Local/Remote S/S, Start/Stop PB, 1No MCB) (L&T, SIEMENS/Equivalent) (Floor/ wall mounting, Free Standing, Compartmentalizing type, constructed with 2/1.6mm thick CRCA sheet, with Power coated panring shade: RAL 7035) a) Incoming Feeders - 63A, 50 KA, 4P, MCCB with O/C, S/C Protection (thermal magnetic), Extended Rotary Handle, Aux. Contact - 1No. b) Outgoing Feeders - 32 A 3 Pole 50 KA MCCB with thermal magnetic realease- 5 nos., 2.2 KW DOL Motor Starter Feeder - 2 nos. & 1.5 KW DOL Motor Starter Feeder - 2 nos.
1
-
-
Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note: Vertical type MCB TPDB is normally used where 3 phase outlets are required.) a) 8 way (4 + 24), Double door
1
-
-
Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) a) 4 way (4 + 12), Double door
12
-
-
Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) b) 6 way (4 + 18), Double door
1
-
-
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. a) 63 A 4 pole 10 kA MCB
1
-
-
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. b) 32 A 4 pole 10 kA MCB
13
-
-
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. c) 16 A 3 pole 10 kA MCB
2
-
-
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. d) 16 A single pole 10 kA MCB
60
-
-
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. e) 10 A single pole 10 kA MCB
3
-
-
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. f) 6 A single pole 10 kA MCB
64
-
-
Supply of D.P. structure using 2 nos. 11 Mtr. Long (200 mm x 100 mm x 5.7 mm thick) M.S. joist/beam as vertical members including their cross arms made up from M.S. channel (75 mm x 40 mm x 4.8 mm thick) and supplying the following accessories as required. a) Supplying of three piece nonlinear resistor type lightning arrestor suitable for 3 wire, 11 KV overhead lines with rated voltage 9 KV (rms) with a nominal discharge current rating of 5 KA and complete with galvanised clamping arrangement, G.I. bolts, nuts, washers etc. as required. b) 11 KV, 400 Amp. A.B. Switch (3 posts, Vertical type) - 1 Set c) 400 Amps rated horn gap fuse (3 nos) - 1 Set d) Pin insulator e) ACSR wire
1
-
-
Supplying of 3 x 120 sq mm XLPE insulated & PVC sheathed Aluminium conductor armoured U.G. power cable of 11 KV grade (E) conforming to IS 7098 (Part-II) as required.
48
-
-
Supplying of cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of XLPE aluminium conductor cable of 11 KV grade as required. a) Outdoor type for 3 x 120 sq mm
3
-
-
Supplying of cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of XLPE aluminium conductor cable of 11 KV grade as required. b) Indoor type for 3 x 120 sq mm
1
-
-
Supplying of 3.5 core 185 sq mm XLPE insulated & PVC sheathed Aluminium conductor armoured U.G. power cable of 1100 V grade conforming to IS 7098 (Part-I) along with cable gland double compression type and cable lug (aluminium) as per site requirement.
300
-
-
Supplying of 3.5 core 150 sq mm XLPE insulated & PVC sheathed Aluminium conductor armoured U.G. power cable of 1100 V grade conforming to IS 7098 (Part-I) along with cable gland double compression type and cable lug (aluminium) as per site requirement.
150
-
-
Supplying of 3.5 core 120 sq mm XLPE insulated & PVC sheathed Aluminium conductor armoured U.G. power cable of 1100 V grade conforming to IS 7098 (Part-I) along with cable gland double compression type and cable lug (aluminium) as per site requirement.
132
-
-
Supplying of 3.5 core 70 sq mm XLPE insulated & PVC sheathed Aluminium conductor armoured U.G. power cable of 1100 V grade conforming to IS 7098 (Part-I) along with cable gland double compression type and cable lug (aluminium) as per site requirement.
151
-
-
Supplying of 3.5 core 50 sq mm XLPE insulated & PVC sheathed Aluminium conductor armoured U.G. power cable of 1100 V grade conforming to IS 7098 (Part-I) along with cable gland double compression type and cable lug (aluminium) as per site requirement.
165
-
-
Supplying of 3.5 core 35 sq mm XLPE insulated & PVC sheathed Aluminium conductor armoured U.G. power cable of 1100 V grade conforming to IS 7098 (Part-I) along with cable gland double compression type and cable lug (aluminium) as per site requirement.
44
-
-
Supplying of 3.5 core 25 sq mm XLPE insulated & PVC sheathed Aluminium conductor armoured U.G. power cable of 1100 V grade conforming to IS 7098 (Part-I) along with cable gland double compression type and cable lug (aluminium) as per site requirement.
22
-
-
Supplying of 3 core 35 sq mm XLPE insulated & PVC sheathed Aluminium conductor armoured U.G. power cable of 1100 V grade conforming to IS 7098 (Part-I) along with cable gland double compression type and cable lug (aluminium) as per site requirement.
66
-
-
Supplying of 3 core 16 sq mm XLPE insulated & PVC sheathed Aluminium conductor armoured U.G. power cable of 1100 V grade conforming to IS 7098 (Part-I) along with cable gland double compression type and cable lug (aluminium) as per site requirement.
352
-
-
Supplying of 3 core 4 sq mm XLPE insulated & PVC sheathed Aluminium conductor armoured U.G. power cable of 1100 V grade conforming to IS 7098 (Part-I) along with cable gland double compression type and cable lug (aluminium) as per site requirement.
600
-
-
Supplying of 4 core 10 sq mm XLPE insulated & PVC sheathed Aluminium conductor armoured U.G. power cable of 1100 V grade conforming to IS 7098 (Part-I) along with cable gland double compression type and cable lug (aluminium) as per site requirement.
231
-
-
Supplying of 4 core 6 sq mm XLPE insulated & PVC sheathed Aluminium conductor armoured U.G. power cable of 1100 V grade conforming to IS 7098 (Part-I) along with cable gland double compression type and cable lug (aluminium) as per site requirement.
396
-
-
Supplying of 3 core 2.5 sq mm PVC insulated & PVC sheathed Aluminium / Copper conductor unarmoured submerssiable flat power cable of 1100 V grade conforming to IS 8130 along with cable end termination and cable lug (Copper) as per site requirement.
550
-
-
Supplying of 3 core 1.5 sq mm XLPE insulated & PVC sheathed Aluminium / Copper conductor armoured U.G. power cable of 1100 V grade conforming to IS 7098 (Part-I) along with cable gland double compression type and cable lug (Copper) as per site requirement.
308
-
-
Supplying of 4 core 1.5 sq mm XLPE insulated & PVC sheathed Aluminium / Copper conductor armoured U.G. power cable of 1100 V grade conforming to IS 7098 (Part-I) along with cable gland double compression type and cable lug (Copper) as per site requirement.
800
-
-
Local Push Button Control Station (Wall/ Structure mounting, non-copartmentalizing type, constructed with 2/1.6mm thick CRCA Sheet, with Powder coated panting shade : RAL 7035) - Start PB with 2NO Contact - 1 no. & Stop PB with 1NO+1NC Contact - 1 no. & 2.5Sq. Mm. Control Terminal - 6 nos.
40
-
-
Supply of 6" dia GI pipe ( ISI mark) for cable protection
36
-
-
Earthing Material - 40x6 mm G.I Earth Flat
300
-
-
Earthing Material - 8 SWG G.I wire
200
-
-
Earthing Material - 3" Dia 3Mtr. GI Pipe with Wire Mesh & Clamp
32
-
-
Earthing Material - 600 mm x 600 mm x 5 mm thick Copper Plate as per IS 3043 : 1987.
32
-
-
Lightning Protection - 45degree G.I Air Terminal with 25 mm GI pipe as per requirement.
25
-
-
Lightning Protection - 25x3 mm G.I Down Conductor
100
-
-
Materials for wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required.
80
-
-
Materials for wiring for twin control light point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed steel conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required.
4
-
-
Materials for wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required a) 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire
180
-
-
Materials for wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required b) 4 X 1.5 sq. mm + 2 X 1.5 sq. mm earth wire
100
-
-
Materials for wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required c) 6 X 1.5 sq. mm + 3 X 1.5 sq. mm earth wire
60
-
-
Supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.
10
-
-
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. (For light plugs to be used in non residential buildings).
20
-
-
2X20/22W LED Batten with suitable LED Tube Light (M/S Havells model Regal Batten or CG/Philips/Bajaj/Wipro make SS model)
50
-
-
Supplying 1200 mm sweep BLDC ceilling fan w/o regulator and with all other accessories suitable for operation on 220 V 50 HZ single phase ac supply.
8
-
-
Supplying of 400 mm sweep wall mounted exhaust fan with all other accessories suitable for operation on 220 V 50 HZ single phase ac supply (M/s M/s Havells/Comptron/Bajaj/Usha make )
8
-
-
Materials for wiring for AC / power plug with 2X4 sq. mm FR PVC insulated copper conductor single core cable in surface/ recessed steel conduit alongwith 1 No 4 sq. mm FR PVC insulated copper conductor single core cable for loop earthing as required.
90
-
-
Supplying and fixing 20 amps, 240 volts, SPN industrial type, socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 amps "C" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.
12
-
-
Materials for wiring for 3 phase power plug with 4X4 sq. mm FR PVC insulated copper conductor single core cable in surface/ recessed steel conduit alongwith 2 Nos 4 sq. mm FR PVC insulated copper conductor single core cable for loop earthing as required.
200
-
-
Supplying of 32 amps, 415 volts, TPN industrial type, socket outlet, with 4 pole and earth, metal enclosed plug top alongwith 32 amps "C" curve, TPMCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.
5
-
-
Supplying of 100 W LED Flood Light Set of IP65 and operating voltage 140 - 270 V AC
14
-
-
Supplying following size of perforated pre-painted M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required. a) 150 mm width X 50 mm depth X 1.6 mm thickness
180
-
-
Supplying following size of perforated pre-painted M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required. b) 300 mm width X 50 mm depth X 1.6 mm thickness
90
-
-
Supply of 1Nos. fire buckets (9 litres capacity) with inscription of‟ FIRE‟ signal red colour i/c filling of sand ,P/F hooks,clamps etc required.
2
-
-
Supply of 4 Nos. fire buckets (9 litres capacity each) with inscription of‟ FIRE‟ signal red colour i/c filling of sand, with suitable stand, P/F hooks,clamps etc required.
2
-
-
Supply of DCP type 25 KG of Fire extinguisher with suitable hose pipe and hook etc as required. ( ISI marked)
7
-
-
Supply of DCP type 9 KG of Fire extinguisher with suitable hose pipe and hook etc as required. ( ISI marked)
56
-
-
Supply of CO2 type 4.5 KG of Fire extinguisher with suitable hose pipe and hook etc as required. ( ISI marked)
13
-
-
Supply of CO2 type 2 KG of Fire extinguisher with suitable hose pipe and hook etc as required. ( ISI marked)
3
-
-
Supply and Installation of Hand operated Siren with atleast 2 Km range.
1
-
-
Supply and Installation of Electric Siren with atleast 3 Km range.
1
-
-
Supply and Installation of Ceiling Mounted 6 Kg ABC Automatic Fire Extinguisher
1
-
-
Supply, Installation and setup for Safety Shower & Eye washer.
1
-
-
S/L of 6 mm thick rubber mat suitable for MV/HV supply (class- B category)as required. ( ISI marked)
6
-
-
Supply of 250 KVA Diesel Generating Set with required accessories as per the detailed specification in Scope of work along with necessary multistrand armoured cable (approx 40 mtrs.) suitable for connecting incoming supply from DG Set with AMF and MCC panel along with exhaust gas piping with necessary fittings and accessories as required (Engine Make: Cummins / Equivalent and Alternator Make: Stamford (CGT) or Equivalent)
1
-
-
Supply of AMF Panel (Automatic Main Failure) for auto start/stop with required accessories suiting to the above DG Set mentioned in Scope of Work
1
-
-
Supply of suitable Mains & DG Supply Changeover Panel along with Auto
Changeover Switch in sheet steel encloser (Make of Changeover Switch: L&T / SIEMENS / Equivalent)
1
-
-
Supply of High Mast Tower (25 mtr. height) suitable for 12 set of 200 W LED flood light fittings (Design standard I.L.E. technical support no. 7:2000, material equivalent to BSEN10025, hot deep galvanization to IS: 4759) (Make: Utkarsh / Bajaj) with power feeder box (outdoor type) including motor timer & all electrical and electronics materials, interconnection suitable for power feeder and operation of 25 mtr. High Mast Tower and 12 set of 200 W LED light (Make: Crompton / Greaves)
2
-
-
Cable 1100V grade multistrand armoured cable as per IS: 7098 (Part 1) / 1988 along with cable gland double compression type and cable lug (Aluminium) as per site requirement – 3C X 6 sqmm Al.XLPE cable (Make: Havells)
200
-
-
Cable 1100V grade multistrand armoured cable as per IS: 7098 (Part 1) / 1988 along with cable gland double compression type and cable lug (Aluminium) as per site requirement – 4C X 10 sqmm Al.XLPE cable (Make: Havells)
50
-
-
Earthing material – 8 SWG GI wire
90
-
-
4MP IP Camera - 1/3# CMOS , H265 & H264
22
-
-
4K IP Fixed Bullet Camera - 1.8" 8MP
4
-
-
4K IP Motorized Bullet Camera
4
-
-
2MP 30x Starlight IR PTZ Network Camera
1
-
-
64 Ch NVR - Intel Processor
1
-
-
64 Ch NVR FOR DISPLAY IN GOURD ROOM
1
-
-
Surveillance Hard Disk 8TB
13
-
-
LED TV FHD 49
1
-
-
LED TV FHD 42
1
-
-
4 Port Giga POE with 2 Uplink GigaLan
9
-
-
8 Port Giga POE with 2 Uplink SFP port
3
-
-
Armourd CAT 6 Cable
1000
-
-
1KVA Online UPS With 9Ah Battery
1
-
-
IP 67 Enclosure Outdoor Box
9
-
-
Server Rack With Accessorise
1
-
-
Armoured 3 core cable 1.5 SQmm
900
-
-
HDPE Pipe 32mm
900
-
-
Fabricated GI Pole - CCTV
7
-
-
Chemical Earthing Pit 50mm 2Mt.
2
-
-
Ethernet LAN Surge Protector RJ-45
64
-
-
Supply of Air Compressor 3HP
1
-
-
Supply of Car Washer with Motor Starter, Cabling, Piping and Nozzle - (3HP P36/30)-Elgi or equivalent reputed make with electrical cabling using cable tray and supports and starter panel.
1
-
-
Supply of HDPE Overhead Tank of capacity 5000 Ltrs
1
-
-
Supply of Water Pump with starter and related plumbing for supply of water to overhead tank from Underground Tank
1
-
-
pH Meter: (Make-Systronics Model-335 or equivalent))
1
-
-
Water Bath: (reputed make)
1
-
-
Hotplate: (reputed make)
1
-
-
Flash Point Apparatus: (Abel)
1
-
-
Lab Stirrer: (reputed make)
1
-
-
Constant RPM Stirrer (reputed make) with attachments as given in Brief Scope of work
1
-
-
Chemical Balance
( make/Model- VWR/LA-214- Equivalent)
1
-
-
Digital Kitchen Balance (5KG Capacity with LCD/LED Display)
1
-
-
Dean & Stark Distillation Apparatus
1
-
-
Rotational Viscometer (make- Anton Par- or Equivalent)
1
-
-
Supply of all the items as detailed in scope of work for Pit Less Type Electronic Weighbridge 80 MT Capacity.
1
-
-
Supply and testing of Diesel Forklift Truck 3000 Kg Capacity as per detail specification given in Brief Scope of Work
2
-
-
Supply, and installation of Potable water purification system ( make-Aqua guard / equivalent) with inbuilt water cooler (RO +UV) with minimum water storage capacity 80 L including pre-filter and all associated accessories such as electric connection, switch board, pipeline connection etc. complete in all respect. A temporary shed needs to be constructed for outdoor installation.
2
-
-
Supply and installation of 1.5 Ton capacity (5-star rating) split AC of any reputed make.
6
-
-
Supply and installation of FURNITURE & FIXTURES, ALMIRAH, FILE CABINET as given in Scope of Work ( All sl. No. 1 to 16 )
1
-
-
Supply and installation of 300 KG Capacity Portable Weighing Machine
1
-
-
INSTALLATION & COMMISSIONING (PART-B)
-
-
-
Installation & Commissioning of SS Hold Tank for Storage of AN/CN Melt of 103 KL capacity, MOC: SS-304 L (Bottom 8 mm, Shell 6 mm and Top 5 mm thick), size - 4500 mm dia X 6750 mm height, tank will be vertical, cylindrical flat bottom & conical self-supported roof with proper sand leveling, grouting along with Electrical Work and Piping Work with necessary fittings, accessories. The specifications and requirement of the Hold Tank and accessories will be as per the details mentioned in "Brief Scope of Work".
1
-
-
Installation & Commissioning of Electrical work – Laying of cable and electrical fixtures along with Cable tray, necessary support of structural steel and fixtures
200
-
-
Installation & Commissioning of SS piping of 50 NB dia long with necessary bends and fittings for Process Piping with heat tracing and insulation
100
-
-
Installation & Commissioning of Quick Release Coupling set (male and female) for 50 mm ID suitable for SS piping & Flexible Chemical Hose
3
-
-
Installation & Commissioning of SS304 Flanges 50 NB size for Process Piping
24
-
-
Installation & Commissioning of SS304 Valves 50 NB Size for Process Piping
12
-
-
Installation & Commissioning of Steam Transfer Piping of 50 NB MS IBR seamless pipe with insulation and with necessary flanges and pipe fittings from one point to Hold Tanks
100
-
-
Installation & Commissioning of 50NB IBR valves for Steam Piping
4
-
-
Installation & Commissioning of CON. Reducer 50 x 40 NB, SS‐304L, #150
4
-
-
Installation & Commissioning of float type 25 NB Steam Traps
4
-
-
Installation of 80 KL Storage Tank for Oxidizer Phase (OP) of 4500 mm Dia X 5000 mm Straight Height. Material of Construction - SS304, Plate thickness - Shell 6 mm, top cover 5 mm and bottom plate 8 mm. Vertical, cylindrical, flat bottom, conical flanged top with supports welded with 75X75 X8 mm Angle Ring, The tank will be complete with 125 Mtrs, 40 NB SCH 40spiral SS304 coil, in two parts for necessary steam heating. It will also be completed with all necessary nozzle, drain, vent, support lugs, heat exchangers, insulated, liquid level transmitter having LCD display and suitable MS Ladder with railing at the top and Sampling Point having an arrangement of two valves for drawl of one liter of sample.
2
-
-
Installation & Commissioning of Electrical work – Laying of cable and electrical fixtures along with Cable tray, necessary support of structural steel and fixtures
200
-
-
Installation & Commissioning of SS piping of 50 NB dia long with necessary bends and fittings for Process Piping with heat tracing and insulation
150
-
-
Installation & Commissioning of Quick Release Coupling set (male and female) for 50 mm ID suitable for SS piping & Flexible Chemical Hose
3
-
-
Installation & Commissioning of SS304 Flanges 50 NB size for Process Piping
50
-
-
Installation & Commissioning of SS304 Valves 50 NB Size for Process Piping
6
-
-
Installation & Commissioning of Steam Transfer Piping of 50 NB MS IBR seamless pipe with insulation and with necessary flanges and pipe fittings from one point to Hold Tanks
150
-
-
Installation & Commissioning of 50NB IBR valves for Steam Piping
4
-
-
Installation & Commissioning of CON. Reducer 50 x 40 NB, SS‐304L, #150
4
-
-
Installation & Commissioning of float type 25 NB Steam Traps
8
-
-
Installation & Commissioning of 24 KL Storage & Blending Tank for Oxidizer Phase (OP) of ID of Tank: 3580mm, Tank wall thickness 6mm plus 50mm space for insulation material all around the tank, thus total OD of tank shall be approx. 3692mm X Height of Tank wall: 2600mm, plus channel support of 200mm at the tank base & top, thus total height of tank from floor level shall be 3000mm Straight Height. Tank Material of Construction - SS304. For other details please refer Scope of Work.
4
-
-
Installation & Commissioning of SS304 Flanges 50NB for above Process Piping
16
-
-
Installation & Commissioning of SS304 Valves 50 NB Size for above Process Piping
8
-
-
Installation & Commissioning of Electrical work – Laying of cable - approx. 3Ø power supply to electrical fixtures attached to Blend Tanks, Pumps and Boilers
80
-
-
Installation & Commissioning of flexible Chemical Hose for Oxidizer Phase unloading and transfer line - 50 mm ID, IS:7654 Type1 with quick release end fittings of BJ or any other suitable better make
80
-
-
Installation & Commissioning of Quick Release Coupling set (male and female) for 50 mm ID flexible chemical hose - of BJ Corporation Make or equivalent
8
-
-
Installation & Commissioning of Insulated Steam Transfer Piping of 25 NB MS IBR seamless pipe with flanges and pipe fittings
60
-
-
Installation & Commissioning of 40 NB valves for Steam Piping
24
-
-
Installation & Commissioning of 25 NB valves for Steam Piping for recovery of condensates
12
-
-
Installation & Commissioning of float type 25 NB Steam Traps
8
-
-
Installation & Commissioning of Steam Transfer Piping of 40 NB MS IBR seamless pipe with insulation and with necessary flanges and pipe fittings and necessary supports, hooks and grouting etc from supply line to the Blend tanks
150
-
-
Installation & Commissioning of Storage Tank (MOC-MS) of 40 KL capacity with additional provision for 5% air space , MOC-IS 2062, Size-3600 mm dia X 4000 St. Ht. . The tank will be vertical, cylindrical, flat bottom and conical top to be fabricated from IS 2062 quality plates. Shell & Top will be from 6 mm thk plates and bottom will be 8 mm thick. Complete with Steam Heating Coil of approx. 80 mtrs. of 25 NB SCH 10 MS Pipe Coil. The tank will be completed with necessary drain, vent etc. The Tank will be insulated by 50 mm thick glass wool pad, chicken mesh and cladding with Aluminium Sheet of 22 SWG along with suitable Ladder & Railing with MS structure with anticorrosive paint along with Walkway over the tanks by gratings/chequered Plate. Walkway of both tanks will be interconnected. 2 Nos. Lightning arrester with 2 Nos. Earth pit and suitable foundation. Installation and commissioning of 2 Nos. Piston Valve 50 NB-2 Nos, Solenoid Actuated Valve 50 NB-4 Nos, Thermo Dynamic Steam Trap 25 NB-4 Nos, Globe Valve 25 NB-4 Nos,3 Way Actuator Operated Ball Valve 50 NB- 1 No, 2 Way Ball Valve 50 NB- 2Nos, Float Level Gauge-1 no, Temperature Transmitter -2 nos., Digital Temperature Controller-2 nos., Temperature Indicator (dial)- 2 nos., Digital Mass Flow Meter -2 Nos., Batcher unit along with control panel and totalizer for both the tanks as per detailed scope of work.
2
-
-
Installation & Commissioning of oil pipe - 80 NB Dia, MS pipe along with necessary valves and fitting and strainers for unloading of Furnace oil tankers along with necessary supports, hooks and grouting etc
40
-
-
Installation & Commissioning of gear pump of capacity 300 LPM with flame proof motor with suction and discharge port of 2" along with base frame and suitable foundation for the pump
2
-
-
Installation & Commissioning of oil pipe- 2" Dia, MS along with 04 Nos. valves and fitting with heat tracing and insulation along with necessary supports, hooks and grouting etc
200
-
-
Installation & Commissioning of Steam Transfer Piping of 50 NB MS IBR seamless pipe with insulation and with necessary flanges and pipe fittings along with necessary supports, hooks and grouting etc
100
-
-
Installation & Commissioning of 50NB valves for Steam Piping
8
-
-
Installation & Commissioning of Insulated Steam Transfer Piping of 25NB MS pipe with flanges and pipe fittings for condensate along with necessary supports, hooks and grouting and underground laying etc
40
-
-
Installation & Commissioning of 25NB valves for Steam Piping
6
-
-
Installation & Commissioning of float type 25 NB Steam Traps
4
-
-
Installation & Commissioning of MOTOR STARTER PANEL/BOX (3-Ph,50Hz,415V, Rated Current 20A, S.C Current 50KA, 1 Sec MCC with IP54 protection, Starter Rating 10HP DOL, consisting with MCCB/MPCB, Contactor, O/L Relay, On/Off/Trip Indication, Start/Stop PB, 1No. MCB as per Type -2 Co ordination Selection) (Specification: Wall/ Structure mounting, non-compartmentalizing type, constructed with 2/1.6mm thick CRCA Sheet, with Powder coated panting shade: RAL 7035) - L&T/SIEMENS/Standard make and will be feed from Existing Electrical Panel.
2
-
-
Installation & Commissioning of Cable 1100V Grade Multi strand Armoured Cable as per IS:7098 (Part-1)/1988 along with Cable Gland Double compression type and Cable Lug (Aluminium) as per site requirement - 4CX16 Sq mm. Al. XLPE CABLE
150
-
-
Installation & Commissioning of Fuel Phase (FP) Blend Tank, 2.5 KL capacity, 1350 mm Dia X 1800 mm height, Material of Construction - IS 2062, Plate thickness - Shell and top 5 mm, Bottom dish 6 mm, the blend tank will be vertical, cylindrical, dished bottom, flat flanged top, complete with 20 m, 25 NB SCH 40 spiral coil, 50 mm Dia shaft along with pitch blade turbine agitator, with all necessary nozzle drain, vent, support legs & ladder and 2 HP TEFC, IP 55 motor and Suitable Gear Box for driving turbine agitator and load cell with least count of 1 kg and max net weight carrying capacity of 3000 kg. Supply of Temperature controller with suitable arrangement to maintain temperature of fuel phase in the range of 40-60° C.
3
-
-
Installation & Commissioning of Basket Strainer for Oxidiser Phase, 75 Ltrs capacity, Make of Construction - Vessel SS 304 and Jacket IS 2062, Vessel Shell 5 mm, bottom dish 6 mm, top plate 6 mm, jacket shell 5 mm, dish 6 mm, the strainer will be vertical, cylindrical, dished bottom, flat flanged top jacketed vessel complete with perforated strainer with 18 mesh SS filter cloth, inlet/outlet nozzle, drain etc.
4
-
-
Installation & Commissioning of Basket strainer for Fuel Phase - 50 Ltrs capacity, material of construction SS 304, plate thickness - vessel shell 5 mm, bottom dish 6 mm, top plate 6 mm, jacket shell 5 mm, dish 6 mm, the strainer will be vertical, cylindrical, dish bottom, flat flanged top, jacketed vessel complete with perforated strainer with 18mesh SS filter cloth, inlet/outlet nozzle, drain etc.
3
-
-
Installation & Commissioning of Close Coupled Screw Pump, RMAB 601 of make Roto Pumps Ltd or any other suitable better make for transferring Oxidizer Phase to Blender and 7.5 HP TEFC, FLP, IP 55 motor with suitable Gear Box and Coupling and base plate along with suitable foundation for the pump
2
-
-
Installation & Commissioning of Closed Coupled Screw Pump, RDAA 492 of make Roto Pumps Ltd or any other suitable better make / Gear Pump for transferring Fuel Phase to Blender and 2.0 HP TEFC, FLP, IP 55 motor with suitable Gear Box and Coupling and base plate along with suitable foundation for the pump
2
-
-
Installation & Commissioning of Emulsion Blender of 150 Kg/min capacity, 208 mm O/D X 458 mm Long, Material of Construction - Body of Aluminium 8 mm, Rod 9.5 mm, Rotating shaft SS 410, 28.5 mm Dia, Blades SS 410, 5 mm thick, Blender will be Horizontal cylindrical complete with series of pin and rotating shaft complete with shear blades, end bearing with seals and 25 HP TEFC, FLP, IP 55 motor along with Coupling base plate and MS stand / platform
2
-
-
Installation & Commissioning of Control Panel comprising of variable frequency drive (VFD) panel consisting of Danfoss or equivalent make frequency converter suitable for three phase 415 Volts motor of following capacity a) 7.5 HP, b) 2.0 HP, c) 25 HP, d) 7.5 HP along with RPM indicators
2
-
-
Installation and commissioning of digital Mass flow meter of body SS-304 equivalent to Krohne Marshall for OB (Flow Range 110-190 kg/min size 2”)
2
-
-
Installation and commissioning of digital Mass flow meter of body SS-304 equivalent to Krohne Marshall for for FB (Flow Range 5-20 kg/min size 1”)
2
-
-
Installation & Commissioning of Close Coupled Screw Pump- WMAA 602 of Roto Pumps Ltd or any other suitable better make for transfer of Emulsion Matrix from Product Pump to Silo and 7.5 HP TEFC, FLP, IP 55 motor with suitable gear box and coupling and base plate along with suitable foundation for the pump
2
-
-
Installation & Commissioning of Control Panel along with Safety Device Units (Pressure transducer, High Temperature and Pressure digital display cum safety cut-off system & pressure gauge, Rupture disc) for Emulsion Transfer Pump
2
-
-
Installation & Commissioning of flexible Chemical Hose for Oxidizer Phase unloading and transfer line - 50 mm ID, IS:7654 Type1 with quick release end fittings of BJ or any other suitable better make
80
-
-
Installation & Commissioning of Fuel Phase transfer pipe line along with required flanges, bends, nut & bolts, gaskets etc. of 25 NB, SCH 10, Material of construction MS along with necessary supports, hooks and grouting etcas per site requirement
50
-
-
Installation and commissioning of flexible Chemical Hose for Oxidizer Phase unloading and transfer line - 25 mm ID, IS:7654 Type1 with quick release end fittings of BJ or any other suitable better make
40
-
-
Installation and commissioning of pipeline (Oxidizer Phase filter - OB Screw Pump) along with required flanges, bends, nut & bolts, gaskets etc. of 50 NB, SCH 10, Material of construction SS 304 as per site requirement.
50
-
-
Installation and commissioning of 50 NB SS-304 (Three piece Design) Ball Valve cf8 grade with Flange Fittings class 150 (With Nut & Bolt and Gaskets)
8
-
-
Installation and commissioning of 25 NB SS-304 (Three piece Design) Three Way Ball Valve cf8 grade with Flange Fittings class 150 (with Nut & Bolt and Gaskets)
2
-
-
Installation and commissioning of flexible Chemical Hose for Oxidizer Phase - Flow Meter - Blender line - 50 mm ID, IS:7654 Type1 with quick release end fittings of BJ or any other suitable better make of length 2 mtr.
4
-
-
Installation and commissioning of 1.0 inch flexible hose (Fuel Phase - Flow Meter - Blender) of Gates make or equivalent with both ends fitted with quick coupler of BJ or any other suitable better make with NRV of 2 mtr.
4
-
-
Installation and commissioning of Emulsion Matrix transfer pipeline from Blender to Silo along with required flanges, bends, nut & bolts, gaskets etc.of 50 NB, SCH 10 MOC- SS304
36
-
-
Installation and commissioning of Quick Release Coupling set (male and female) for fixing 50 mm ID transfer hoses - of BJ Corporation Make or equivalent
6
-
-
Installation and commissioning of Gear Pump of capacity 300 LPM with flame proof motor with suction and discharge port of 2" for preparation of Fuel Phase, base plate, suitable hopper, starter /panel (as per site condition)
1
-
-
Installation and commissioning of Furnace oil / Fuel Phase pipe- 2" Dia, MS along with necessary fitting & 04 Nos of Valves and insulation along with necessary supports, hooks and grouting etc
36
-
-
Installation & Commissioning of Silo for Storage of Emulsion Matrix of 30 KL (40T) capacity, MOC-IS 2062, Size-3000 mm dia X 4000 mm height X 750 mm conical height, Silo will be vertical, cylindrical, conical bottom and top complete with all necessary nozzle, vent, support bracket, with suitable platform with ladder to access the various inlets/outlets at the top of the silo along with insulation of 50 mm thick glass wool pad, chicken mesh and cladding with Aluminium Sheet of 22 SWG with Epoxy paint inside Silo, 3 Way Ball Valve 125 NB-2Nos., Butterfly Valve Actuator Operated 65 NB-1No.
2
-
-
Installation & Commissioning of Digital Load Cells (Mettler Toledo make) for Silo with suitable panel
2
-
-
Installation & Commissioning of Screw Pump - WMAA 602 of Roto Pumps Ltd make with No Flow switch and 7.5 HP TEFC, IP 55 FLP motor with suitable gear box, coupling base plate , Motor Starter & cable (Approx 65 M each)
4
-
-
Installation and commissioning of Control Panel along with Safety Device Units (High Pressure, Low Pressure switches, High Temperature Cut-off switch & pressure gauge, Rupture disc) for Emulsion Transfer Pump as per the given scope of work
2
-
-
Installation and commissioning of 2.5 inch ID flexible hose of Gates make or equivalent with both ends fitted with quick coupler of BJ make
20
-
-
Installation and commissioning of Emulsion Matrix transfer line from Hopper of Screw pump to Pump Trucks and Emulsion Tanker to Silo - 50 NB SCH 10 SS 304
36
-
-
Installation and commissioning of SS 304 Flanges 50 NB for above Process Piping
12
-
-
Installation and commissioning of 50 NB SS-304 (Three piece Design) Ball Valve cf8 grade with Flange Fittings class 150 (With Nut & Bolt and Gaskets)
6
-
-
Installation and commissioning of 50 NB SS-304 Three way Ball Valve with Flange Fittings class 150 (With Nut & Bolt and Gaskets)
4
-
-
Installation and commissioning of Quick Release Coupling set (male and female) for 50 mm ID flexible chemical hose - of BJ Corporation Make or equivalent along with suitable 1 no. Dust Cap
6
-
-
Installation & Commissioning of FO Fired Boiler Unit RXD-850 (850 kg/hr) working pressure of 10.54 kg/cm2 with Economizer of Thermax make only
3
-
-
Installation and Commissioning of Softner EZ30 of Thermax make only
1
-
-
Installation and Commissioning of Filter EZ40 FDM of Thermax make only
1
-
-
Installation and Commissioning of Oxidation Chamber- E Z200C of Thermax make only
1
-
-
Installation and Commissioning of Mild Steel Chimney (self supported) of 300 mm top diameter and 25 Mtrs height (approx) along with flue gas duct with supporting structure, sampling collection point, platform for collection & spiral stairs and ladder with railing and protection. up to collection point and ladder from collection point to top - to cater 2 nos of 850 Kg/Hr Boilers including appropriate civil foundation for the Chimney to withstand the load and necessary supports including duct piping from Boilers to Chimney, Lightning arrester and light indicator over Chimney with 2 Nos. Earth pit and suitable civil foundation Work.
2
-
-
Installation and Commissioning of Pressure reducing station, Range- In let pressure 10.54 kg/cm2, Out let pressure 3.5 kg/cm2 Max, Steam flow-Max. 3000 kg/hr, Body-C.S, Inlet size-80mm, outlet-100mm with cast steel valve PRV size 50mm Flange Class ASA 150 as per site requirement along with necessary supports, hooks & grouting etc
2
-
-
Installation and Commissioning of MS Day Tank for FO - 3 KL capacity (round tank with 5 mm plate) with level indicator, 2 nos of 6KW heaters along with temp. controller and cut off switch, necessary electrical supply & connection along with MS piping from Day Tank to Boilers along with necessary MS overhead platform with foundation of suitable size and height with ladder as necessary for housing of FO tank as per site requirement
1
-
-
Installation and Commissioning of HDPE Day Tanks for Soft Water of 10 KL capacity each, along with MS piping from Day Tank to Boilers, along with MS piping from Day Tank to Boilers.
2
-
-
Civil construction works for construction of overhead platform as per attached drawing for FO/LDO and HDPE (Water tank) day tank having stairs, railing for stairs and entire platform constructed with structural steel and chequered plate (min. thickness 5 mm) along with all civil works for foundation & footing, PCC work (100 mm) below the platform.
1
-
-
Installation and Commissioning of Insulated Steam Header Piping 6" MS IBR seamless pipe thickness 8mm with air vent, pressure relief, safety valve, pressure gauge and draining of steam condensate through steam trap, 2 nos outlet for 2 nos PRS with provision of suitable length with flanges and pipe fittings along with NRV 4 nos in between Boiler output and steam header with necessary bend and fittings for catering steam output from 4 nos Boilers 850 kg/hr each and 3 nos more points for future expansion in same header (with a provision for up gradation to 6000 Kg/Hr)
1
-
-
Installation and Commissioning of Steam Transfer Piping of 50 NB MS IBR seamless pipe with insulation and with necessary flanges and pipe fittings from Boiler outlet/steam header to PRS to Blend Tanks along with necessary supports, hooks and grouting overhead/underground laying etc
120
-
-
Installation and Commissioning of Insulated Steam Transfer Piping of 80NB MS pipe with flanges and pipe fittings for recovery of condensate from Blend tanks to condensate recovery tank along with necessary supports, hooks and grouting overhead/underground laying etc
80
-
-
Installation and Commissioning of Insulated Steam Transfer Piping of 25NB MS pipe with flanges and pipe fittings for steam supply / condensate collection along with necessary supports, hooks and grouting overhead/underground laying etc
45
-
-
Installation and Commissioning of 50NB valves for Steam Piping
18
-
-
Installation and Commissioning of 25NB valves for Steam Piping
12
-
-
Installation and Commissioning of float type 25 NB Steam Traps
12
-
-
Installation and Commissioning of water line - 2" Dia, GI, class B along with necessary valves and fittings as per site requirement along with necessary supports, hooks and grouting overhead/underground laying etc
350
-
-
Installation and Commissioning of water line - 1" Dia, GI, class B along with necessary valves and fittings as per site requirement along with necessary supports, hooks and grouting overhead/underground laying etc
200
-
-
Installation and Commissioning of Furnace Oil - 1.5 " Dia, MS along with necessary valves, and fitting with heat tracing and insulation along with necessary support post and structure to run overhead/arrangement to run underground
200
-
-
Installation and Commissioning of Furnace Oil - 1" Dia, MS along with necessary valves, and fitting with heat tracing and insulation along with necessary support post and structure to run overhead/arrangement to run underground
40
-
-
Installation and Commissioning of Monoblock Pump 2HP, Connection Size 2" for delivery up to height approx 40 feet - reputed make like Kirloskar/KSB or equivalent
3
-
-
Installation and Commissioning of BOILER AREA MCC PANEL as described in Sl. No. 95 of Part-A with necessary support base and structures etc along with Preparation, Approval of necessary drawings / layout plans & liaison for obtaining statutory permissions, through “A” or “B” class Electrical competency holder or from concerned authority as applicable, from concerned authorities.
1
-
-
Laying and connection of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required including end termination with necessary glands and lugs on cable tray / in the existing masonry open duct / on wall surface as required. a) Above 35 sq. mm and upto 185 sq. mm. Sl. No. 96
140
-
-
Laying and connection of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required including end termination with necessary glands and lugs on cable tray / in the existing masonry open duct / on wall surface as required. a) Upto 35 sq. mm. Sl. No. - 97
120
-
-
Laying and connection of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required including end termination with necessary glands and lugs on cable tray / in the existing masonry open duct / on wall surface as required. a) Upto 35 sq. mm. Sl. No.- 98
100
-
-
Installation and Commissioning of Electrical Mono Rail Hoist including all accessories, electrical and civil work complete in all respect suitable for lifting of Boiler coils and accessories having flame proof motor.
1
-
-
Installation & Commissioning of Single Roll Crusher of capacity 15-16 MT/Hr for crushing High Density Ammonium Nitrate Lumps (bag size) 750 mm x 500 mm x 250 mm with opening of the Crusher 900 mm (approx) x 550 mm (approx) and output size 40 mm approx along with suitable drive and motor and starting panel and supply cable and necessary safety features including providing of suitable civil & structural foundation and suitable placement of tail end of the Conveyor and support system along with charge hopper above the Crusher Opening and platform for keeping pallets of HDAN and space for manual charging of bags in to Crusher as per the details mentioned in brief scope of work.
1
-
-
Installation & Commissioning of High Density Ammonium Nitrate conveying system through a Belt Conveyor of width 800-1000 mm & CD of approx 35-40 m along with skirting arrangement on both edges of the Conveyor and suitable drive, motor, starting panel and supply cable and necessary safety features along with 4 nos. discharge points / ploughs for feeding 4 nos. Blend Tanks falling in the discharge zone of around 25m. (The tanks are of dia 3692 mm-OD with a centre to centre gap of 5000 mm between the Tanks) with total lift requirement of around 3m from tail end to discharge zone including providing of suitable Civil & Structural foundation for supporting the Conveyor System along with side walk ways as per the details mentioned in brief scope of work.
1
-
-
Installation, Testing & commissioning of 50 KL Tank Fire Hydrant Water Tank along with Construction of 1 No. RCC foundation suitable to withstand the load of 50 KL Water Tank
1
-
-
Installation, Testing & commissioning of Diesel operated Pump set complete in all respect i.e. comprising pump, motor of 1450 rpm, Pin Bush type coupling, coupling guard, common base frame, cushy foot mounting, and foundation. a) Fire Pump of capacity 2280 LPM – (137 M3/Hr) (Make-Kirloskar/KSB/Greaves)
1
-
-
Installation, Testing & commissioning of Pump set complete in all respect i.e. comprising pump, motor of 1450 rpm, Pin Bush type coupling, coupling guard, common base frame, cushy foot mounting, and foundation. b) Jockey Pump of Capacity 180 LPM. (Make-Kirloskar/KSB/Greaves)
1
-
-
Installation & Commissioning of Pressure Switch with guide valve and pressure damper including necessary fitting.
2
-
-
Installation & Commissioning of Combined Starting Panel for above four nos. pump set, with Star-Delta type starter for Fire Pump & D.O.L. type starter for Jockey Pump.
1
-
-
Installation & Commissioning of Pressure Gauge (100mm dia & 0 to 15 Kg / Sq.cm) with Guide Valve and pressure damper including necessary fittings.
3
-
-
Installation & Commissioning of single headed oblique type Hydrant Valve (Alloy Steel) as per IS: 5290 with PVC blank cap.
15
-
-
Installation & Commissioning of water Monitor as per IS: 8442 in the fire hydrant line
2
-
-
Installation & Commissioning of 4-way breeching inlet as per IS: 904 in the fire hydrant line.
1
-
-
Installation & Commissioning of 63mm X 15 Mtr. long Hose as per IS: 8423, bounded with pair of Steel Coupling as per IS: 903.
30
-
-
Installation & Commissioning of front glassed single door powder coated M.S. Hose Box (16 X 18 SWG) of standard design to accommodate one Branch Pipe with nozzle and 2 lengths of 63mm X 15 Mtr. long Hose.
15
-
-
Installation & Commissioning of C.I. Flanged Gate Valve as per IS: 14846, PN 1.6 of 100mm NB
2
-
-
Installation & Commissioning of C.I. Flanged Non Return Valve as per IS: 5312, PN 1.6 of 100mm NB
1
-
-
Installation & Commissioning of aboveground/underground M.S. piping conforming to IS: 1239 / 3589 with fitting, support, clamp and treatment on outer surface by one coat of primer & two coats of synthetic enamel red paint for 100mm NB, M.S., Medium (Schedule 40) along with required support, bend, etc., end of the pipes to be connected with suitable flanges and fittings complete in all respect.
450
-
-
Laying and connection of PVC insulated and PVC sheathed / XLPE power cable through cable tray (cable tray, gland, hooks and necessary supports to be provided by bidder) as required including end termination with necessary glands and lugs on cable tray on wall surface as required.
250
-
-
Installation & Commissioning of Mono Block Pump including base frame and protection shed, Earth Pit etc.
1
-
-
Installation & Commissioning of GI pipe including all support and fittings for water pipeline 1”
200
-
-
Installation and commissioning of 300 Ltr. SS Kettle with agitator with Ball Valve 40 NB- 2Nos, Ball Valve 25 NB- 2Nos
2
-
-
Installation and commissioning of monoblock pump MOC-SS304, Capacity 2Hp Suitable for transfer of GA and water
2
-
-
Installation and commissioning of 25 NB pipe, MOC SS 304 necessary nozzel, bend , valve etc
18
-
-
Installation and commissioning of HDPE Day Tanks of 5 KL capacity (For Gassing Agent and Water)
2
-
-
Preparation, Approval of necessary drawings / layout plans & liaison for obtaining statutory permissions, through "A" or "B" class Electrical competency holder, from concerned authorities (applicable statutory fees shall be payable by IOCL)Installation & Commissioning of items mentioned at Sl. No. 123 to 140 of Part-A (BoQ1) with necessary support base and structures etc
1
-
-
Preparation, Approval of necessary drawings / layout plans & liaison for obtaining statutory permissions, through "A" class Electrical competency holder, from concerned authorities (applicable statutory fees shall be payable by IOCL)Installation & Commissioning of items mentioned at Sl. No. 141 of Part-A (BoQ1) with necessary support base and structures etc
1
-
-
Laying and connection of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required including end termination with necessary glands and lugs on cable tray / in the existing masonry open duct / on wall surface as required. a) Upto 35 sq. mm
900
-
-
Laying of one number additional PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground in the same trench in one tier horizontal formation including excavation, sand cushioning, protective covering and refilling the trench etc as required including end termination with necessary glands and lugs on cable tray / in the existing masonry open duct / on wall surface as required. a) Upto 35 sq. mm
800
-
-
Laying and connection of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required including end termination with necessary glands and lugs on cable tray / in the existing masonry open duct / on wall surface as required. a) Above 35 sq. mm and upto 185 sq. mm
500
-
-
Laying of one number additional PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground in the same trench in one tier horizontal formation including excavation, sand cushioning, protective covering and refilling the trench etc as required including end termination with necessary glands and lugs on cable tray / in the existing masonry open duct / on wall surface as required. a) Above 35 sq. mm and upto 185 sq. mm
398
-
-
Laying and connection of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required including end termination with necessary glands and lugs on cable tray / in the existing masonry open duct / on wall surface as required. a) Upto 185 sq. mm
1721
-
-
Installation & Commissioning of items mentioned at Sl. No. 160 to 167 of Part-A (BoQ1) and Testing & Commissioning of Earth Pit complete in all respects like, Excavation, earthing plate, GI pipe, Aluminium Strip, charcoal & Salt etc and laying & connections of earth flat/GI wire and lightning protection and fixing of lighting poles and connections testing etc.
1
-
-
Installation & Commissioning of items mentioned at Sl. No. 168 to 182 of Part-A (BoQ1) all wiring for light & sockets including necessary civil modification and grouting etc.
1
-
-
Installation & Commissioning of items mentioned at Sl. No. 183 and 184 of Part-A (BoQ1) MS cable tray including necessary civil foundation, grouting and welding with Iron angle supports.
1
-
-
Erection, Testing & Commissioning of Outdoor, Silent Type 250 KVA Diesel Generating Set as per technical specification of OEM or manufacturer of DG Set along with AMF and exhaust gas piping with necessary fittings and accessories as required and installation of suitable cable (approx 40 mtrs.) for connecting incoming supply from DG Set with AMF and MCC panel including arrangement of load testing (Diesel required for load testing will be supplied by IOCL)
1
-
-
Civil works for construction of base platform for housing the DG Set outdoor nearby the main MCC panel room
1
-
-
Preparation, Approval of necessary drawings / layout plans & liaison for obtaining statutory permissions, through "A" or "B" class electrical competency holder as applicable, from concerned authorities (applicable statutory fees shall be payable by IOCL) and Installation & Commissioning of items mentioned at sl. no. 196 to 198 of Part-A (BoQ1) along with lying of cables by making suitable trenches/through piping at road crossing/ critical areas for underground cable laying and cable connections with necessary glands and lugs and end connections to synchronize the DG supply with MCC panel and making of earth pits (4 nos. as mentioned in BoQ1) complete in all respects like earthing plate, GI pipe, GI Strip, charcoal & salt etc including earth pit resistance testing & certification and lying & connections of earth flat/GI wire etc.
1
-
-
Preparation, Approval of necessary drawings / layout plans & liaison for obtaining statutory permissions, through "A" or "B" class Electrical competency holder as applicable, from concerned authorities (applicable statutory fees shall be payable by IOCL) Installation & Commissioning of all items mentioned at Sl. No. 199 to 202 of Part-A (BoQ1) along with cable laying, connections of earth GI wire and fixing of lighting arrestors, construction of civil foundation, grouting and all associated works for High Mast Tower.
2
-
-
I&C of all CCTV items i.e. Sl. No. 203 to 222
1
-
-
Installation and commissioning of Air Compressor 3HP in all respect
1
-
-
Installation and commissioning of Car Washer with Motor Starter, Cabling, Piping and Nozzle - (3HP P36/30)-Elgi or equivalent reputed make with electrical cabling using cable tray and supports and starter panel.
1
-
-
Installation and commissioning of HDPE Overhead Tank of capacity 5 KL with pipeline arrangements from water storage tank to the above mentioned day tank
1
-
-
Civil Work for construction of overhead structure ( minimum height 4 Meter ) with structural steel and chequered plate having arrangement of railing and ladder complete in all respect for required civil work for erection of structure with foundation and footing
1
-
-
Installation and commissioning of Water Pump with starter and related plumbing for Installation and commissioning of water to overhead tank from Underground Tank
1
-
-
I&C of all Lab Equipments mentioned in Sl. No. 227 to 236
1
-
-
Installation & Commissioning and Stamping Charges of Pit Less Type Electronic Weighbridge 80T Capacity, as per technical specification given in Brief Scope of Work
1
-
-
Co-ordination and liason for obtaining statutory clearances from weight and Measurement department for weighbridge, consumer pump and portable weighing machine.
1
-
-
Civil construction work for the foundation of the weighbridge platform and required ramp.
1
-
-
Civil construction work for construction of weighbridge room of size 4 M X 3 M X 3 M including supply, installation and commissioning of all civil and electrical works.
1
-
-
Co-ordination and liason for obtaining statutory clearances for commissioning of the plant : Grant of License from PESO under Explosives Rules , AN Rules and Petroleum Rules as per given scope of work.
1
-
-
Co-ordination and liason for obtaining statutory clearances for commissioning of the plant : Professional services for conversion of the Consent for Establishment (CFE) to Consent for Operation (CFO) from Telangana State Pollution Control Board (TSPCB) in co-ordination with site in-charge.as per given scope of work.
1
-
-
Co-ordination and liason for obtaining statutory clearances for commissioning of the plant : Grant of Factory license as per given scope of work.
1
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%