Indian Institute Of Chemical Technology Tender

Digging and Laying,testing and commissioning of one number each PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following sizes direct in ground including excavation, sand cushioning, protective covering (laying of 150mm sand bed, along with laying of bricks in transverse directions)and refilling the trench of the size 750mm width and 750mm deep etc as required. Above 185 sq. mm and upto 400 sq. mm

Providing, laying and fixing following dia RCC pipe NP2 class (Heavy duty) in CC Roads complete with RCC collars, jointing with cement mortar 1:2 (1 cement : 2 fine sand) including trenching (75 cm deep) and refiling ,make good the road surface etc as required. 300mm dia

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thickincluding accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metrelong etc. with charcoal/ coke and salt as required.

Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Supplying and laying 25 mm X 5 mm copper strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm)

Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including connection / termination with GI thimble etc. as required.

Out door type Panels:- Design, manufacture, supply, installation, testing & commissioning of cubicle compartmentalized out door type LV Panel with double door and hut type top fabricated out of 2mm thick CRCA Sheet metal with base channel for 415Volts ,50Hz AC Supply confirming to IP65 Protection with switchgear and accessories as below with pad locking sealing arrangements earthing stud labeling , painting ,interconnections, providing danger sign plates as per IS specifications. The panel shall be placed over neatly constructed &finished pedestals to be done by the in1:3:6 cement concrete extending 500 mm above the ground leval.(Detailed technical Specification in Annexure - I) Incoming:01.630Amps (50kA) 4 PoleMCCB -01NoMake: L&T/Siemens (Microprocessor release) MTX2.0 02.RYB Indication lamps (LED Type), 03. Digital Ammeter,Voltmeter 04.800 A Copper Busbars with heat shrinkable insulation sleaves 05.CTs 800/5A-3Nos Out Goings:-01.400Amps(36KA)4Pole MCCB-02No (Microprocessor release) MTX2.0 02.250Amps(36kA)4Pole MCCB-2 Nos (Microprocessor release), Make: L&T/ Siemens MTX2.0 03.125Amps(36kA)4Pole MCCB-4 Nos Make: L&T/Siemens

Supply of out door Flood Light LED Luminaire of200 Watt with all required accessories and wiring in recess /surface as required complete and as directed by the engineer incharge.Type:BVP283 LED240 CW FG SY5WB 200W PSU Make: Philips

Supply of following whether proof three core aluminium conductor PVC insulated cable as per IS standards etc., as required and as directed by the engineer in charge. Make: - Havells / Finolex

(i)3X2.5 sq.mm

(ii)3X4 sq.mm

Installation, testing and commissioning of pre-wired, fluorescentfitting / LED Fittings compact fluorescent fitting/LED Fittings of all types, complete withall accessories and tube etc. directly on ceiling/ wall,including connection with 1.5 sq. mm FRLS PVC insulated, copperconductor, single core cable and earthing etc. as required.