Hyderabad Metropolitan Water Supply And Sewerage Board Tender

Manufacturer,Supply,Delivery,Commissioing and testing of 3 MLD Capacity micro filter water treatment;Labour charges for operation and maintainence 3MLD Micron Filter 2Nos/shift Semi Skilled fitters as directed by the Dept Offficers

Manufacturer,Supply,Delivery,Commissioing and testing of 3 MLD Capacity micro filter water treatment;Supplying and fixing of Chain link mesh fencing by using 50 x 50mm, 8 gauge Iron Chainlink mesh including by using 2"x2"x6mm Sams equal angular @2.15mts C/c by earth work excavating pits of size 0.30 x0.30 x0.45m and providing PCC (1:5:10) base concrete 4" thick and PCC (1:3:6) mix using 20mm graded size HBG metal balance depth including cost and conveyance of all materilas to wrok site, all seigenoriage charges and labour charges etc., complete for finsihed item of work, chain link mesh fencing height 2.10 mts (7'0") as per drawing as directed by the Engineer In charge.complete etc., as directed by the departmental officers.

Manufacturer,Supply,Delivery,Commissioing and testing of 3 MLD Capacity micro filter water treatment;Fabrication, supply, delivery and fixing of 1.5 mm thick prefabricated, powder coated M.S. Sheet roof structure having specifications Sams of Ability to withstand, adverse conditions, Corrosion-resistance, Longer life span Rigid, construction Low maintenance including necessary M.S.Angulars, Poles, Hardware materials, C.C.Bed fabrication, Welding charges, waste, cutting, loading and unloading, transportation charges, cost of materials complete etc., as directed by the departmental officers.

Manufacturer,Supply,Delivery,Commissioing and testing of 3 MLD Capacity micro filter water treatment;Design, Manufacture, supply, delivery, erection, testing and commissioning of 7 L/Hr capacity dozing pump for dosing of Hypo and PAC Including transportion charges: etc complete as directed by the departmental officers

Manufacturer,Supply,Delivery,Commissioing and testing of 3 MLD Capacity micro filter water treatment;Supply and transportation of 72W LED Street light Body made of high grade pressure die-cast Aluminium alloy with corrosion resistant powder coat, having protective toughened glass cover, Suitable lens on LEDs, Less Glare, IP 66 (Silicon gasket ensures Optical & Electrical compartments are IP 66) protected, wide operating voltage range, P.F > 0.90, System having efficacy >110 lumens/watt, with Ingress protection IP66, Potted driver, Driver surge protection >10KV, THD<15%, CCT: 3000-6500K as desired by the department and as per IS, CRI>70 Inbuilt Electrical protections like Over voltage, short circuit, Over load, Open Circuit, Miswiring, etc complete with BIS certification with 5 years warranty as directed by the departmental officers

Manufacturer,Supply,Delivery,Commissioing and testing of 3 MLD Capacity micro filter water treatment;Supply and transportation of 20W +/-10%, >/ 2000 lumens, 1200mm length LED retro tube light, housing made with alluminium anodised body, wide operating voltage with double side connection, PF=0.9, Surge protection: > 2KV, THD and frosted cover CCT: 3000K-6500K as desired by the department and as per IS specifications, minimum CRI=80,.etc complete with 5 years warranty with BIS Certification. LUMINAIRE MAKE: Phillips / OSRAM / Wipro/Crompton / Bajaj / Havells/Jaquar / IB LED / Panasonic / Halonix / HPL / Syska / Eveready / Surya / Keselec/ FIEM/Arraystorm/GM/ Goldmedal. LED MAKE: PHILIPS LUMILEDS / CREE/NICHIA/ OSRAM/SAMSUNG/ LG LEDS complete as directed by dept officers.

Manufacturer,Supply,Delivery,Commissioing and testing of 3 MLD Capacity micro filter water treatment;Supply of 2.5 SqmmFRLSH / HFFR PVC insulated 1100V grade as per IS:694/1990, IS 17048 specification for Copper cable as directed by the departmental officers

Manufacturer,Supply,Delivery,Commissioing and testing of 3 MLD Capacity micro filter water treatment;Supply of 1.5 SqmmFRLSH / HFFR PVC insulated 1100V grade as per IS:694/1990, IS 17048 specification for Copper cable as directed by the departmental officers

Manufacturer,Supply,Delivery,Commissioing and testing of 3 MLD Capacity micro filter water treatment;Supply of 6-32A,FP, 10KA, C/D Curve ISI Mark. Makes: Legrand-DX3/Schneider- Acti9/Siemens/L&T Exora / Cabtree / Indo Asian / BCH. complete as directed by dept officers.

Manufacturer,Supply,Delivery,Commissioing and testing of 3 MLD Capacity micro filter water treatment;Supply of 6-32A,SP, 10KA, C/D Curve ISI Mark. Makes: Legrand-DX3/Schneider- Acti9/Siemens/ L&T Exora / Cabtree / Indo Asian / BCH. complete as directed by dept officers.

Manufacturer,Supply,Delivery,Commissioing and testing of 3 MLD Capacity micro filter water treatment;Supply of 8 Way SPN DB with IP 43 Protection as per IS:13032 and suitable for-8 Nos S.P out goings and for 1 No Incommer etc complete. Makes: Legrand / Schneider / Siemens / L&T / Cabtree Xpro / ABB / C&S., complete as directed by dept officers.

Manufacturer,Supply,Delivery,Commissioing and testing of 3 MLD Capacity micro filter water treatment;Supply of 4P 40-63A 10KA, C/D Curve ISI Mark. Makes: Gold Medal /GM/Milltec/ Sputnik/Stanjo Amron. Complete as directed by dept officers

Manufacturer,Supply,Delivery,Commissioing and testing of 3 MLD Capacity micro filter water treatment;125 A 4 Pole MCCB, 25KA

Manufacturer,Supply,Delivery,Commissioing and testing of 3 MLD Capacity micro filter water treatment;160A 4 Pole MCCB, 25KA

Manufacturer,Supply,Delivery,Commissioing and testing of 3 MLD Capacity micro filter water treatment;Supply of following MCCB Adjustable, Confirms to IS/IEC 60947-2 having 25KA Breaking Capacity with thermal magnetic release Panel Mounted. Makes: L&T-D sine / Schneider-NS NSX/Legrand-DP X3/ Siemens-3V/Hager-h3/C&S-Winbreak. Complete as directed by dept officers.

Manufacturer,Supply,Delivery,Commissioing and testing of 3 MLD Capacity micro filter water treatment;6 sqmm 3 core cable

Manufacturer,Supply,Delivery,Commissioing and testing of 3 MLD Capacity micro filter water treatment;10 sqmm 3 core cable

Manufacturer,Supply,Delivery,Commissioing and testing of 3 MLD Capacity micro filter water treatment;Supply of following sheethed flexible copper cable of PVC PVC/XLPE Insulated Sheathed Multi Core Bright Annealed Bare Copper Conductor Heavy Duty Industrial Cables for Voltage Grade upto 1100 Volts as per IS: 694:1990including all 24 transportation charges etc complete. Makes: Finolex / RR kabel / Havells / Polycab /RPG/KEI/Gloster / V-Guard/Finecab / SPM / Gemini / Unistar / Windsor / Payal / Fortune Arrt / Avocab / Pawancab / Nakoda/HPL/Sudhakar as directed by the departmental officers

Manufacturer,Supply,Delivery,Commissioing and testing of 3 MLD Capacity micro filter water treatment;25 Sqmm 3.5 Core

Manufacturer,Supply,Delivery,Commissioing and testing of 3 MLD Capacity micro filter water treatment;35 Sqmm 3.5 Core

Manufacturer,Supply,Delivery,Commissioing and testing of 3 MLD Capacity micro filter water treatment;50 Sqmm 3.5 Core

Manufacturer,Supply,Delivery,Commissioing and testing of 3 MLD Capacity micro filter water treatment;Supply of fallowing XLPE insulated, 1100V grade armoured alluminium cable with ISI mark as per specification confirming to IS:7098 (Part - 1) Makes: Torrent/ Unicab / Universal / Polycab / Havells / Gloster / KEI / Finolex / Payal / RR kable / Beljin/Ollvin/Finecab / RPG/V-Guard / Orbit / Fortune Arrt / Gemscab / Bonton/SPM/Unistar / Windsor/ Avocab / Pawancab / Nakoda/ Suncab as directed by the Departmental officers.

Manufacturer,Supply,Delivery,Commissioing and testing of 3 MLD Capacity micro filter water treatment;To draw Treated water from existing sump

Manufacturer,Supply,Delivery,Commissioing and testing of 3 MLD Capacity micro filter water treatment;To draw raw water from Conduit to pressure filter

Manufacturer,Supply,Delivery,Commissioing and testing of 3 MLD Capacity micro filter water treatment;Supply, fabrication, commissioning, testing and trial run of suitable out door cubical control panel board with enamel coated in 14 SWG Iron sheet comprising of below items internal wiring with necessary locking arrangements as mentioned below suitable upto 20HP with Star-delta to the open well submersible pumpset of L&T make with Powder coating and Pedestal legs for mounting the above panel board with necessary end terminations, cable gland with excavation of earth work, CC bed etc., loading and unloading transportation, complete as directed by the deptl.officers a) ML-2 power Contactors 30 Amps L&T make 1 No b) Suitable thermal over load relay 10-20 amps L&T make 1 No. c) 0-500 Volts Voltmeter (meco) 1 No d) 0-100 Amps ammeter with 100/5 amps CT/S 1 Set e) 125 Amps TPN SFU L&T make 1 No f) RYB indicator lamps 1 Set. g) R&G Indicator'lamps for On/off Indication 2 Nos h) Volts & Amps selector Switches 2 Nos i) Push Buttons R&G 2 Nos j) 63 Amps MCCB 1 No. k) Capacitor Bank 5 KVAR, L&T make 1N 1) Aluminum Earth bus 1 No. m) 16-Amps 3 pole MCB 1 No n) VPG D1 minilec single phase preventor with necessary control circuit. 1 No etc., complete as directed by departmental officers.

Manufacturer,Supply,Delivery,Commissioing and testing of 3 MLD Capacity micro filter water treatment;Supply delivery, filxng & testing, trial run of 20HP open well submersible pumpset with a head of 18 meters to discharge 3200 LPM having 125mm X 125mm Dia and construction of Cl impeller, CI body, copper rotor as per IS specifications of texmo, Lubi, Falconor its equivalent make including loading and unloading transportation, shifting at site cost, conveyance of all materials, labour charges etc., complete as directed by departmental officers. To draw Treated water from existing sump.

Manufacturer,Supply,Delivery,Commissioing and testing of 3 MLD Capacity micro filter water treatment;Supply delivery, fiixng & testing, trial run of 10HP open well submersible pumpset with a head of 12 meters to discharge 3200 LPM having 150mm X 150mm Dia and construction of CI impeller, SS body, copper rotor as per IS specifications of texmo, Lubi, Falcon or its equivalent make including loading and unloading transportation, shifting at site cost, conveyance of all materials, labourcharges etc..complete as directed by departmental officers. To draw raw water from Conduit to pressure filter.

Manufacturer,Supply,Delivery,Commissioing and testing of 3 MLD Capacity micro filter water treatment;Fabrication, supply, delivery and fixing of 200mm internal dia, 15mm thick MS flanges for fixing of valves per specification including cost of MS plates, welding rods, I and all other required materials and delivery of fabricated MS specials to site hosting and carefully lowering in to ready made trenches keeping in position on ready built, pedestals or support and laying true to alignment and gradient and perfect lining by jacking and jointing inclusive of all jointing materials and labour charges, and all other incidential and operational charges etc., complete as directed by dept officers.

Manufacturer,Supply,Delivery,Commissioing and testing of 3 MLD Capacity micro filter water treatment;Fabrication, supply, delivery and fixing of 150mm internal dia, 15mm thick MS flanges for fixing of valves per specification including cost of MS plates, welding rods, I and all other required materials and delivery of fabricated MS specials to site hosting and carefully lowering in to ready made trenches keeping in position on ready built, pedestals or support and laying true to alignment and gradient and perfect lining by jacking and jointing inclusive of all jointing materials and labour charges. and all other incidential and operational charges etc., complete as directed by dept officers.

Manufacturer,Supply,Delivery,Commissioing and testing of 3 MLD Capacity micro filter water treatment;Manufacture and supply of 200mm internal dia MS pipes using 8mm thick plate conforming to IS-20062-1992 grade-A manufactured as per IS-3589-2001 in suitable lengths to suit the site condition lowering laying them on readymade trenches or over pedestrial true to alignment and gradient and jointing with 3 runs arc welding etc as directed by the departmental officers by the dept officers including testing at factory or test pressure of 15kg/sqcm including two coats of epoxy painting of approved make including cost of mild steel plates epoxy paint welding rods and other required materials and delivery of fabricated pipes to site, loading unloading inclusive all over incidental and operational charges etc., complete as directed by dept officers.

Manufacturer,Supply,Delivery,Commissioing and testing of 3 MLD Capacity micro filter water treatment;Manufacture and supply of 150mm internal dia MS pipes using 8mm thick plate conforming to IS-20062-1992 grade-A manufactured as per IS-3589-2001 in suitable lengths to suit the site condition lowering laying them on readymade trenches or over pedestrial true to alignment and gradient and jointing with 3 runs arc welding etc as directed by the departmental officers by the dept officers including testing at factory or test pressure of 15kg/sqcm including two coats of epoxy painting of approved make including cost of mild steel plates epoxy paint welding rods and other required materials and delivery of fabricated pipes to site, loading unloading inclusive all over incidental and operational charges etc complete as directed the dept officers

Manufacturer,Supply,Delivery,Commissioing and testing of 3 MLD Capacity micro filter water treatment;Manufacture, supply and delivery of 150mm dia DI (Ductile Iron) Wafer Butterfly valves conforming to IS 13095 (and its amendments). With hand lever below 150 mm, with Worm gear for 200 mm and above as directed by the departmnetal officers

Manufacturer,Supply,Delivery,Commissioing and testing of 3 MLD Capacity micro filter water treatment;Manufacture, Supply and delivery of 200mm PN 1.6 DI D/F Swing Check Valves Slanted/Straight seated with metallic, corrosion proof and wear resistant seat faces resilient seat, Body and Disc of ductile cast iron GGG-40/SG 400/15 or GGG-50/SG- 500/7 or equivalent grade as per IS 3896(part2)-1985 and subsequent revisions. All the inside and outside of the body is to be coated with double coating of epoxy liquid. Drilled as per requirement of dept. officers.

Manufacturer,Supply,Delivery,Commissioing and testing of 3 MLD Capacity micro filter water treatment;Manufacture, Supply, delivery, hoisting, lowering, and fixing at work site P.N 1.6 Type 200mm dia DI D/F Gate Valves (Soft Seated) Resilient seated soft sealing gate valves (Sluice valves) with body bonnet of ductile cast iron of grade GGG-40/ SG-400/15 or GGG-50/SG-500/7 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4. All the valves should be with Electrostatic powder coating both inside and outside pocket less body passage. Drilled as per requirement of the deptt. and testing at factory for a test pressure of24 Kg/Sq.Cm. and16 Kg/Sq.Cm. on body and seat resepectively jointing with flanged ends including cost of jointing materials such as bolts, rubber insertion, white lead including filling with water, and testing to required pressure all taxes and duties etc., complete as directed by dept officers.

Manufacturer,Supply,Delivery,Commissioing and testing of 3 MLD Capacity micro filter water treatment;Manufacture, Supply and delivery of 150mm PN 1.6 DI D/F Swing Check Valves Slanted/Straight seated with metallic, corrosion proof and wear resistant seat faces resilient seat, Body and Disc of ductile cast iron GGG-40/SG 400/15 or GGG-50/SG- 500/7 or equivalent grade as per IS 3896(part2)-1 and subsequent revisions. All the inside and outside of the body is to be coated with double coating of epoxy liquid. Drilled as per requirement of dept.. Specification and Dimensions as per I.S 5312 or equivalent codes

Manufacturer,Supply,Delivery,Commissioing and testing of 3 MLD Capacity micro filter water treatment;Manufacture, Supply, delivery, hoisting, lowering, and fixing at work site P.N 1.6 Type 150mm dia DI D/F Gate Valves (Soft Seated) Resilient seated soft sealing gate valves (Sluice valves) with body bonnet of ductile cast iron of grade GGG-40/ SG-400/15 or GGG-50/SG-500/7 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4. All the valves should be with Electrostatic powder coating both inside and outside pocket less body passage. Drilled as per requirement of the deptt. and testing at factory for a test pressure of24 Kg/Sq.Cm. and16 Kg/Sq.Cm. on body and seat resepectively jointing with flanged ends including cost of jointing materials such as bolts, rubber insertion, white lead including filling with water, and testing to required pressure all taxes and duties etc., complete as directed by dept officers.

Manufacturer,Supply,Delivery,Commissioing and testing of 3 MLD Capacity micro filter water treatment;Hire charges for engaging Hydrallic excavator shovel 0.50 Cum 75HP type for earth work excavation and refilling the pipeline trenches including wages for operator and helper and cost of fuel for machinery and transportion charges from yard to work site and all other incidental and operational charges etc complete as directed by the HMWSSB Engineers

Manufacturer,Supply,Delivery,Commissioing and testing of 3 MLD Capacity micro filter water treatment;Painting with synthetic enamel paints of approved brand in two coats over a coat of primer grade-I (Red oxide) including cost a conveyance of all materials to work site charges and all operational, incidental, labour charges etc. complete for finished item of (BLD CSTN-12-7 & 12-12) etc., complete as directed by the departmental officers.

Manufacturer,Supply,Delivery,Commissioing and testing of 3 MLD Capacity micro filter water treatment;Plastering 20 mm thick in two coats with CM(1:4) prop; 16mm thick for 1st coat and with CM(1:3) prop., with Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50 (As per GO Ms No 37 Industries and Commerce(Mines-I) Dept, dated 29.05.2018)4mm thick for 2nd coat to brick wall use Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50 (As per GO Ms No 37 Industries and Commerce (Mines-I) Dept, dated 29.05.2018) with sponge finishing including cost and conveyance of all materials, labour charges, leads, lifts, curing, scaffolding charges and all other incidental and operational charges etc., complete for finished item of work as directed by dept officers.

Manufacturer,Supply,Delivery,Commissioing and testing of 3 MLD Capacity micro filter water treatment;Construction of CRS masonry in CM (1:6) prop., With Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50 (As per GO Ms No 37 Industries and Commerce(Mines-I) Dept, dated 29.05.2018) in 2nd sort using granite stone including cost and covenyance of all materials to site, labour charges, curing, all leads, lifts and all other incidental and operational charges etc., complete as directed by the departmental officers for finished item of work complete as directed by dept officers.

Manufacturer,Supply,Delivery,Commissioing and testing of 3 MLD Capacity micro filter water treatment;Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT)/Mild steel (MS) steel bars of TATA, SAIL, VSP, Jindal as approved by Ministry of Steel (Fe 500/500D/550D grade as per IS 1786-1979) of different diameters for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, Including.cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors as directed by dept officers.

Manufacturer,Supply,Delivery,Commissioing and testing of 3 MLD Capacity micro filter water treatment;RCC M-20 Nominal mix Using Ordinary Portland Cement (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry Including cost and conveyance of all materials like cement, fine aggregate (sand) (As per GO Ms No 37 Industries and Commerce(Mines-I) Dept, dated 29.05.2018,the Government have directed all the Engineering works Departments to useManufactured Sand (Rock sand) and natural river sand in the ratio of 50:50 in all the mixes of Cement concrete and in the items of works)coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work, including centering, shuttering complete as directed by dept officers.

Manufacturer,Supply,Delivery,Commissioing and testing of 3 MLD Capacity micro filter water treatment;Plain Cement Concrete M10 Nominal Mix; using 40 mm guage graded metal hard granite machine crushed metal including cost and conveyance of all materials coarse and fine agregate(As per GO Ms No 37 Industries and Commerce(Mines-I) Dept, dated 29.05.2018, the Government have directed all the Engineering works Departments to useManufactured Sand (Rock sand) and natural river sand in the ratio of 50:50 in all the mixes of Cement concrete and in the items of works) to site, centering, machine mixing, lifts and delifts, leads, laying in position, compacting, curing, all labour charges, etc., complete as directed by dept officers

Manufacturer,Supply,Delivery,Commissioing and testing of 3 MLD Capacity micro filter water treatment;Collection supply and filling with Gravel in trenches, sides of foundations & basement wherever necessary and the pipeline trenches after laid, jointed, executed, tested with intial lead in layers not exceeding 15 cm thick, consolidating each deposited layer by watering consolidting each layer by watering and ramming including cost and conveyonce of gravel water to work site and all operational incidental, labour charges, hire charges of T&P.,complete for finished item of work as directed by dept officers.

Manufacturer,Supply,Delivery,Commissioing and testing of 3 MLD Capacity micro filter water treatment;Earthwork excavation and depositing on the bank in all types of soils like black cotton soil, red earth, and ordinary gravel, hard gravelly soils, mixture of gravel, soft disintegrated rock, hard disintegrated rock, Conglomerated rock, stoney earth and earth mixed with fair size boulders except rock requiring blasting with different lifts as per specifications and drawings and as directed by the departmental officers, including protecting the walls and other structures, existing water supply lines, sewers, power cables, telephone cables/ducts, storm water drains, traffic signals etc., wherever it is possible so as not to distrub the existing utility services etc., taking all precautionary measures in the restricted areas such as urban areas including diversion of the traffic, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and excluding backfilling for GLSR/ pipeline trenches for laying sewer/ Water supply lines including all incidental and operational charges etc., complete as directed by dept officers.

Manufacturer,Supply,Delivery,Commissioing and testing of 3 MLD Capacity micro filter water treatment;Supply, Delivery, Erection and Commissioning of 3MLD Water Treatment Plant, having a specifications of Rate of filtration 1st stage 250lpm-m2 for Sand Filter, Rate of filtration 2nd stage 500lpm-m2 for Activated Carbon Filter, Stages of Treatment Four Stages, First Stage Gravel/Quartz of suitable size, Second Stage Activated Carbon Granules 2.50mm to 3.50mm with lodine No 900+ MB, Third Stage 5 micron Disc filter, Forth Stage Disinfection with chlorine dosing with necessary fittings and accessories with testing at site including technical team, including necessary packing, loading and unloading, transportation and transit risk up to destination, labor cost etc as directed by departmental officers. The specifications: Technical Specification for 3MLD Vertical Pressure Sand Filter and Activated Carbon Filter. Flow Rate for PSF: 15cumt/sqmt of Sand BedFlow Rate for ACF: 30 cumt/sqmt of carbon Bed Turnover Period: 16Hours Filtration Capacity: 187.50 cumt/Hour a) Vertical Pressure Sand Filter - 2nos (1.5 MLD of each). FilterDia: 3000mm.Filter Shell Height: 2000mm. Filter Ends: Dish Ends. Filter Shell Thick: 6mm. Dish Ends Thick: 8mm.Paint: Internal FRP 2mm thick, external Redoxide primer coat and final coat of ASPA Paint. Internal system: Lateral system of 10" center header and fitted with 11/2" UPVC pipes as sub lateral. Frontal pipeline: 150mm dia pipe Tata / Jindal "B" Class. Butter fly Valves: 5 nos 150mm dia ISI Make Butter flyvalves. Manhole 1no 500mm dia ID top manhole of 16mm thick flange X 10mm thick dummy flange and 1no 500mm dia side manhole of same thick as mentioned above Filter Media. 40-20 mm pebbles 200mm depth. 20-12 mm pebbles 200mm depth. 12-06 mm quartz 100mm depth. 06-02 mm quartz 100mm depth. Corse Sand quartz 100mm depth. Fine Sand quartz 450mm depthNote: below lateral systern filling will be done with 40mm/20mm crushed Matter b) Activated Carbon Filter. Filter Dia: 3000mm. Filter Snell Height: 2000mm. Filter Ends: Dish Ends. Filter Shell Thick: 6mm. Dish Ends Thick: 8mm. Paint: Internal FRP 2mm thick, external Redoxide primer coat and final coat of ASPA Paint. Internal system: Lateral system of 12" center header and fitted with 11/2" UPVC pipes as sub lateral. Frontal pipeline: 200mm dia pipe Tata / Jindal "B" Class. Butter fly Valves: 5 nos 200mm dia ISI Make Butter fly valves. Mannole: 1no 500 dia ID top manhole of 16mm thick flange X 10mm thick dummy flange andino 500mm diaID side manhole of same thick as mentioned above Activated Carbon 950 IV (8X16 Mesh). 40-20 mm pebbles 200mm depth. 20-12 mm pebbles 200mm depth. 12-06 mm quartz 100mm depth. 06-02 mm quartz 100mm depth. Activated Carbon 600mm death c) Micron Filter. 5Nos. Micron Filter: 5 Micron Filter. Discharge capacity: 50 cumt/hour of each Filter. Suction X Delivery: 3" X 3 4 Dosing Pumps. Make Sindu/H20/e Dose. Type: Electronic. Capacity: 0-12 liters per hour. Fittings : Fitted on a base frame along witn 1 nos of 50 liters capacity solution tank Complete. Note: The above specified specification is only up to the plant room: in additional to the above specification we are sipplying only 18 meters of pipe only.