Hyderabad Metropolitan Development Authority Tender

Patelkunta Park, Kukatpally;Twister 3 in 1: Technical Specification: Triple twister with below dimensions: 1) Dimensions (LxWxH): 1300 x 1300 x 1650 mm 2) Fabricated with the main post of NB 100mm (G.I.) ?C? Class Pipe of approved make. 3) Handle the Main frame of NB 32mm (G.I.) ?C? Class Pipe. 4) Handle frame spokes of NB 25mm (G.I.) ?C? Class Pipe. (?NB? stands for Nominal Bore Size i.e., Internal Diameter of pipe in millimeters). 5) Foothold plate of made of MS Sheet Metal of 3mm thickness. 6) All Pipes are powder coated with 80-120 micron thick AkzoNobel or equivalent Paints. 7) All joints of pipe are robotically welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. 8) Zinc primer paint is applied at all the welding points before finishing. 9) Maintenance-free bearings of SKF or equivalent make duly oil sealed and self-lubricated are used in the equipment manufactured. 10) Once the concrete is set, the equipment is fixed onto it. 11) High tensile steel with galvanized nut bolts is used for assembly. 12) Equipment made to EN16630 & DIN 79000 International standard for outdoor fitness equipment. 13) Self-Explanatory stainless steel label fixed on equipment for ease of use.

Patelkunta Park, Kukatpally;Vertical Shoulder Pull or Pull chair: Technical Specification Pull chair in a pair with the below specifications: 1) Dimensions (LxWxH): 2400 x 800 x 2000 mm 2) Fabricated with the main post of NB 100mm (G.I.) ?C? Class Pipe of approved make. 3) Seat main frame of NB 50mm (G.I.) ?C? Class Pipe, Pipe connecting main post with handle frame of NB 65mm (G.I.) ?C? Class Pipe. 4) Handle frame of NB 32mm (G.I.) ?C? Class Pipe. (?NB? stands for Nominal Bore i.e., Internal Diameter of pipe in millimeters) 5) All Pipes are powder coated with 80-120 micron thick AkzoNobel or equivalent Paints. 6) All joints of pipe are robotically welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. 7) Zinc primer paint is applied at all the welding points before finishing. 8) Handlebars are provided with high-end quality rubber grips. 9) Base plate cover made of virgin LLDPE plastic by rotational molding with 4.00mm thickness, UV resistant, and colored. 10) Seat to be made up from virgin LLDPE manufactured by rotational molding with 4.00 mm thickness, colored, UV resistant, and environmentally friendly. 11) Maintenance-free bearings of SKF or equivalent make duly oil sealed and self-lubricated are used in the equipment manufactured. 12) The equipment is fitted with inbuilt limiters to prevent unwanted movements. 13) Once the concrete is set, the equipment is fixed onto it, and nuts and bolts are covered with a base plate cover. 14) High tensile steel with galvanized nut bolts is used for assembly. 15) Equipment made to EN16630 & DIN 79000 International standard for outdoor fitness equipment. 16) Self-Explanatory stainless steel label fixed on equipment for ease of use.

Patelkunta Park, Kukatpally;Shoulder Back Twist or Arm wheel: Technical Specification: Arm wheel in a pair with below specifications: 1) Dimensions (LxWxH): 850 x 800 x 1800 mm 2) Fabricated with main post of NB 100mm (G.I.) ?C? Class Pipe of approved make. 3) Wheel frame of NB 32mm with connecting spokes of NB 25mm, Pipe connecting main pilar with wheel frame of NB 50mm. All pipes must be (G.I.) ?C? Class Pipes. (?NB? stands for Nominal Bore Size i.e., Internal Diameter of pipe in millimeters). 4) All Pipes are powder coated with 80-120 micron thick AkzoNobel or equivalent Paints. 5) All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. 6) Zinc primer paint is applied at all the welding points prior to finishing. 7) Base plate cover made of virgin LLDPE plastic by rotational molding with 4.00mm thickness, UV resistant and colored. 8) Maintenance free bearings of SKF or equivalent make duly oil sealed and self-lubricated are used in the equipment manufactured. 9) Once the concrete is set, the equipment is fixed on to it and nuts and bolts are covered with base plate cover. 10) High tensile steel with galvanized nut bolts are used for assembly. 11) Equipment made to EN16630 & DIN 79000 International standard for outdoor fitness equipment. 12) Self-Explanatory stainless steel label fixed on equipment for ease of use.

Patelkunta Park, Kukatpally;AB Bourd Duos : Technical Specification: double equipment main 1) Dimensions (LxWxH): 1500 x 1500 x 900 mm 2) Fabricated with main post of NB 100mm (G.I.) ?C? Class Pipe of approved make. 3) Main frame of NB 50mm (G.I.) ?C? Class Pipe. 4) Support frame of NB 32mm & NB 25mm (G.I.) ?C? Class Pipe. (?NB? stands for Nominal Bore Size i.e., Internal Diameter of pipe in millimeters). 5) All Pipes are powder coated with 80-120 micron thick AkzoNobel or equivalent Paints. 6) All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. 7) Zinc primer paint is applied at all the welding points prior to finishing. 8) Maintenance free bearings of SKF or equivalent make duly oil sealed and self-lubricated are used in the equipment manufactured. 9) Seats made up from round MS Sheet Metal. 10) Once the concrete is set, the equipment is fixed on to it. 11) High tensile steel with galvanized nut bolts are used for assembly. 12) Equipment made to EN16630 & DIN 79000 International standard for outdoor fitness equipment. 13) Self-Explanatory stainless steel label fixed on equipment for ease of use. 14) Base plate cover and all open end pipes covered by SS / LLDPE Caps.

Patelkunta Park, Kukatpally;ELLIPTICAL MACHINE (LFI-51) Providing and fixing Elliptical Machine as follows. Dimensions:(L×W×H)=1400×700×1750mm, MOC : Fabricated with pipes & Tubes. Bearings : Deep groove/ self aligning ball bearings, Handle Bars: High Quality Grip Rubber Fabricated with the main post of NB 100mm (G.I.) ?C? Class Pipe of approved make. 3) Seat main frame of NB 50mm (G.I.) ?C? Class Pipe, Pipe connecting main post with handle frame of NB 65mm (G.I.) ?C? Class Pipe. 4) Handle frame of NB 32mm (G.I.) ?C? Class Pipe. (?NB? stands for Nominal Bore i.e., Internal Diameter of pipe in millimeters) 5) All Pipes are powder coated with 80-120 micron thick AkzoNobel or equivalent Paints. 6) All joints of pipe are robotically welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. 7) Zinc primer paint is applied at all the welding points before finishing. 8) Handlebars are provided with high-end quality rubber grips. 9) Base plate cover made of virgin LLDPE plastic by rotational molding with 4.00mm thickness, UV resistant, and colored. 10) Seat to be made up from virgin LLDPE manufactured by rotational molding with 4.00 mm thickness, colored, UV resistant, and environmentally friendly. 11) Maintenance-free bearings of SKF or equivalent make duly oil sealed and self-lubricated are used in the equipment manufactured. 12) The equipment is fitted with inbuilt limiters to prevent unwanted movements. 13) Once the concrete is set, the equipment is fixed onto it, and nuts and bolts are covered with a base plate cover. 14) High tensile steel with galvanized nut bolts is used for assembly. 15) Equipment made to EN16630 & DIN 79000 International standard for outdoor fitness equipment. 16) Self-Explanatory stainless steel label fixed on equipment for ease of use.

Patelkunta Park, Kukatpally;LEG PRESS DOUBLE (LFI-48) Providing and fixing Leg Press Double made from G.I. pipe. Dimensions:(L×W×H)=1900×400×1600mm 1) Main Frame-Ø 114 mm OD G.I ?C" class pipe. 2) Foundation Plate-M.S round plate of Ø 220 mm & 10 mm thickness. 3) ) Seat main frame of NB 50mm (G.I.) ?C? Class Pipe, Pipe connecting main post with handle frame of NB 65mm (G.I.) ?C? Class Pipe. 4) Seat-300×300 mm×2 mm thick G.I seat with corner fillet for safety. 5) INTERNAL LIMITORS is used for this equipment because at this stage maximum level reaches, if this is operated beyond the maximum level which causes to physical damage that?s y Limiters are used to resist an equipment. 6) Bearing-Deep Grooveé Self Aligning Ball Bearings with permanent lubricated Reputed brand. 7) Bearing Bushes-Ø 60 mm OD seamless pipe. 8) Bearing bush closing cap- SS material. Fabricated with the main post of NB 100mm (G.I.) ?C? Class Pipe of approved make. 9) Handle frame of NB 32mm (G.I.) ?C? Class Pipe. (?NB? stands for Nominal Bore i.e., Internal Diameter of pipe in millimeters) 10) All Pipes are powder coated with 80-120 micron thick AkzoNobel or equivalent Paints. 11) All joints of pipe are robotically welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. 12) Zinc primer paint is applied at all the welding points before finishing. 13) Handlebars are provided with high-end quality rubber grips. 14) Base plate cover made of virgin LLDPE plastic by rotational molding with 4.00mm thickness, UV resistant, and colored. 15) Seat to be made up from virgin LLDPE manufactured by rotational molding with 4.00 mm thickness, colored, UV resistant, and environmentally friendly. 16) Maintenance-free bearings of SKF or equivalent make duly oil sealed and self-lubricated are used in the equipment manufactured. 17) The equipment is fitted with inbuilt limiters to prevent unwanted movements. 18) Once the concrete is set, the equipment is fixed onto it, and nuts and bolts are covered with a base plate cover. 19) High tensile steel with galvanized nut bolts is used for assembly. 20) Equipment made to EN16630 & DIN 79000 International standard for outdoor fitness equipment. 21) Self-Explanatory stainless steel label fixed on equipment for ease of use.

Patelkunta Park, Kukatpally;LEG EXTENSION(LFI-49) Providing and fixing Leg Extension made from G.I. pipe. Dimensions:(L×W×H)=1000×620×910mm 1) Main Frame-Ø 114 mm OD G.I ?C" class make Jindal pipe. 2) Foundation Plate-M.S round plate of Ø 220 mm & 10 mm thickness. 3) Handle- made up of Ø 42 mm OD "B" class G.I. make Apollo Pipe. 4) Seat frame-Ø 42 mm OD "B" class G.I. make Apollo Pipe. 5) Seat-300×300 mm×2 mm thick with corner fillet for safety. 6) Leg Frame- Ø 42 mm OD "B" class G.I. make Apollo Pipe. 7) Bearing-Deep Grooveé Self Aligning Ball Bearings with permanent lubricated reputed brand. 8) Bearing Bushes-Ø 60 mm OD seamless pipe. Fabricated with the main post of NB 100mm (G.I.) ?C? Class Pipe of approved make. 9) Seat main frame of NB 50mm (G.I.) ?C? Class Pipe, Pipe connecting main post with handle frame of NB 65mm (G.I.) ?C? Class Pipe. 10) Handle frame of NB 32mm (G.I.) ?C? Class Pipe. (?NB? stands for Nominal Bore i.e., Internal Diameter of pipe in millimeters) 11) All Pipes are powder coated with 80-120 micron thick AkzoNobel or equivalent Paints. 12) All joints of pipe are robotically welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. 13) Zinc primer paint is applied at all the welding points before finishing. 14) Handlebars are provided with high-end quality rubber grips. 15) Base plate cover made of virgin LLDPE plastic by rotational molding with 4.00mm thickness, UV resistant, and colored. 16) Seat to be made up from virgin LLDPE manufactured by rotational molding with 4.00 mm thickness, colored, UV resistant, and environmentally friendly. 17) Maintenance-free bearings of SKF or equivalent make duly oil sealed and self-lubricated are used in the equipment manufactured. 18) The equipment is fitted with inbuilt limiters to prevent unwanted movements. 19) Once the concrete is set, the equipment is fixed onto it, and nuts and bolts are covered with a base plate cover. 20) High tensile steel with galvanized nut bolts is used for assembly. 21) Equipment made to EN16630 & DIN 79000 International standard for outdoor fitness equipment. 22) Self-Explanatory stainless steel label fixed on equipment for ease of use.

Patelkunta Park, Kukatpally;DOUBLE CROSS WALKER /SKY WALKER (LFI-44) Providing & Fixing Sky Walker made from G.I. pipe. Dimensions:(L×W×H)=1500×700×1800 mm 1) Main Frame- Ø 114 mm OD G.I ("C" class) pipe. 2) Foundation Plate-M.S round plate of Ø 220 mm & 10 mm thickness. 3) Paddle Vertical support- Ø 48 mm OD "B" class G.I Pipe. 4) Remaining Frame- Ø 60 mm and Ø 42 mm OD "B" class G.I Pipe. 5) Handle- Ø 33 mm OD "B" class G.I. Pipe dually bending design. 6) Leg Movement frame-80 mm×40 mm×3.5 mm thick rectangular pipe. 7) Footrest-cast iron 320×155 ×2.5 mm thickness. 8) Bracket-6 mm thick laser profile is use to support leg movement frame. 9) Top closing cap-dome shaped by SS material. 10) Bearing-Deep Grooveé Self Aligning Ball Bearings with permanent lubricated reputed brand. 11) Bearing Bushes-Ø 60 mm OD seamless pipe. Bearing bush closing caps- SS material. Grips- High Quality Rubber Ø 46 mm OD. Coating-Best quality of powder coating 80-100 microns thickness. Hardware-Grade ? 4.6 galvanized. Maximum loading weight-240 kg and only two persons can use at a time. Safety Instructions and Exercise chart - start & finish position stick on product. 12)Fabricated with the main post of NB 100mm (G.I.) ?C? Class Pipe of approved make. 13) Seat main frame of NB 50mm (G.I.) ?C? Class Pipe, Pipe connecting main post with handle frame of NB 65mm (G.I.) ?C? Class Pipe. 14) Handle frame of NB 32mm (G.I.) ?C? Class Pipe. (?NB? stands for Nominal Bore i.e., Internal Diameter of pipe in millimeters) 15) All Pipes are powder coated with 80-120 micron thick AkzoNobel or equivalent Paints. 16) All joints of pipe are robotically welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. 17) Zinc primer paint is applied at all the welding points before finishing. 18) Handlebars are provided with high-end quality rubber grips. 19) Base plate cover made of virgin LLDPE plastic by rotational molding with 4.00mm thickness, UV resistant, and colored. 20) Seat to be made up from virgin LLDPE manufactured by rotational molding with 4.00 mm thickness, colored, UV resistant, and environmentally friendly. 21) Maintenance-free bearings of SKF or equivalent make duly oil sealed and self-lubricated are used in the equipment manufactured. 22) The equipment is fitted with inbuilt limiters to prevent unwanted movements. 23) Once the concrete is set, the equipment is fixed onto it, and nuts and bolts are covered with a base plate cover. 24) High tensile steel with galvanized nut bolts is used for assembly. 25) Equipment made to EN16630 & DIN 79000 International standard for outdoor fitness equipment. 26) Self-Explanatory stainless steel label fixed on equipment for ease of use.

Patelkunta Park, Kukatpally;Plain Cement Concrete (1:5:10) (cement: fine aggregate: Coarse aggregate) for foundations and under flooring bed using coarse aggregate 40mm size hard , machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, sales & other taxes on all materials except GST and including all charges for machine mixing, laying concrete in foundations and under flooring bed, ramming in 15 cm layers finishing top surface to the required level curing etc.,and overheads & contractors profit complete for finished item of work. (APSS No. 402)

Patelkunta Park, Kukatpally;Plain Cement Concrete (1:3:6) nominal mix using 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate(sand), coarse aggregate, water etc. to site, including sales & other taxes excluding GST on all materials and including all charges for mixing, laying concrete in position, curing etc., & lift charges , and overheads & contractors profit for finished item of work. (APSS No. 402) for Flooring Bed.

Patelkunta Park, Kukatpally;Providing , fabricating and fixing one instructional and information sign board as specified in cement concrete block foundation at each location including cost and conveyance of all materials like cement, sand, water, etc. complete including sales & other taxes on all materials including all labour charges like mixing of cement mortar, laying, lift charges , water charges etc., and overheads & contractors profit complete for finished item of work as directed by engineer-in-charge.

Patelkunta Park, Kukatpally;Providing Of Precast M20 grade cement concrete kerb to Open Gym Flooring with the dimensions top and bottom width 50mm and 110mm respectively and 400mm high including chamfering 80-85mm over foundation 10mm thick ,including material ,labour, machinary, operational, incidental Charges and transportion charges etc.for complete finished item of work and as directed by Engineer-in charge. Nominal mixer (1:1.5:3)

Patelkunta Park, Kukatpally;Supply & application of one coat water based cement primer of exterior grade II and two coats of acrylic emulsion paint exterior grade with silicon additives having VOC (Volatile Organic Compound) content less than 50 grams/ liter for exterior walls to give an even shade after thourughly brushing the surface to remove all dirt and remains of loose powdered materials including cost and conveyance of all materials to site, sales & other taxes except GST, incidental, operational and all labour charges etc., and overheads & contractors profit complete for finished item of work in all floors.(To kerbs) charge.

Patelkunta Park, Kukatpally;Supply and Fixing of 25 MM EPDM: Providing & Laying of EPDM (Ethylene Propylene Diene Monomer) Safety & Sports total 25MM [19 MM SBR & 6 MM EPDM] thick Rubber flooring systems comprising two layers with the top layer of 6mm being high-quality EPDM granules and the bottom layer is 19 mm SBR with Inorganic pigments for colouring. The granules shall be mixed on-site with specially developed binders and trowelled by hand to specified thickness creating a seamless surface. The flooring system shall be hygienic, durable with high elasticity, all-weather, resilient, nonslip, high impact, and easy maintenance EPDM. The performance requirements and test methods for an impact-absorbing playground surfacing shall comply with SS 495:2001 or ASTM Standards. Make: Koochie or equivalent make.

Patelkunta Park, Kukatpally;Providing Annual Maintenance for 2nd Year @ 3% of total contract amount

Patelkunta Park, Kukatpally;Providing Annual Maintenance for 3rd Year @ 4% of total contract amount

Patelkunta Park, Kukatpally;Providing Annual Maintenance for 4th Year @5% of total contract amount

Patelkunta Park, Kukatpally;Providing Annual Maintenance for 5th Year @5% of total contract amount