Bharat Heavy Electricals Limited Tender

CATEGORY: 220V DC, Lead-Acid plante High discharge type battery as per Annexure-II -Load duty cycle of Section-I, 1.80 ECV, 108 cells, with all accessories listed under clause 2 below , Electrolyte sulphuric acid for first filling plus 10 percent extra in non returnable container , FRP rack properly treated with three coats of anti-acid paints for acid resistance for 220V battery bank , Insulator rubber pad etc. for rack with 5 percent extra , Inter cell Inter row and Inter bank connectors with connection hardware , Teakwood Cable clamps with hardware cable , Hydrometer in step of 0.005 , Set of hydrometer syringes suitable for the vent holes in different cells for specific gravity reading , Bridging clamps , Battery log book , Instruction card , Specific gravity correction chart , Thermometer 0 to 100 degree C with plug and cap with specific gravity correction scale , Digital cell testing voltmeter 3-0-3 V with testing leads , Pocket Thermometer Digital type , Electrolyte resistant plastic funnels , Electrolyte resistant plastic jug , Plastic filling bottles for filling up , Rubber apron , Rubber hand gloves , Cell lifting straps , Insulated Spanner for cells , Self adhesive PVC stickers for cell numberings , Goggles industrial , No smoking notice , Wall mounting holders for hydrometer and thermometer , Battery Trolley with Nylon wheels , Hot air gun , Siphons , Vent Plugs , Intercell connectors , Complete dry cell , Intercell connectors with hardware 1 Lot 10 percent or 5 nos. whichever is more for total population of 2 sets of battery , Vent Plug 1 Lot 10 percent or 5 nos. whichever is more for total population of 2 sets of battery , Stand Insulator 1 Lot 20 percent or 10 nos. whichever is more for total population of 2 sets of battery , LUMP SUM CHARGES PER VISIT FOR ENGINEER EXCEPT DAILY CHARGES , LUMP SUM DAILY CHARGES FOR ENGINEER , SUPERVISION OF TYPE TEST CAPACITY TEST AND TEST FOR VOLTAGE ON BATTERY DURING DISCHARGE TO BE CARRIED OUT AT SITE ON COMPLETION OF E and C AND IMMEDIATELY PRIOR TO PUTTING BATTERY IN SERVICE , Test for retention of charge , Endurance test , Ampere hour and watt hour efficiency test , Capacity test and test for voltage on battery during discharge