Tidel Park Limited Tender

Supply,installation,Testing and Commissioing of Solar Panel 550 Watt II Pack of 2 II Half-cut 144 Cells II Dual Glass Mono Perc Bifacial Solar Panels II 30 Years Performance Warranty.Modules must qualify to IEC 61215 / IS 14286 and IEC 61730 Part I and II for safety qualification testing or Equivalent IS(Under Dec.) & IEC 61701/IS 61701 90% output for first 10 years, 80% output for 25 years.

Module Mounting Structures: The PV modules will be mounted on fixed metallic structures of adequate strength and appropriate design, which can withstand load of modules and high wind velocities up to 160 km per hour. The support structure used in the power plants will be hot dip Galvanized Iron (G.I) with m thickness. The modules support structure shall be hot dip galvanized for holding the PV modules The leg of the structure shall be fixed and grouted in the PCC foundation column made with 1:2:4 cement concrete at depth of 4.5ft below ground with 1ftx1ft and 1 feet above ground. For each table, 8 nos of foundation columns should be provided to support the steel structure. The foundation shall support SPV modules at a given orientation, absorb and transfer the mechanical loads to the ground properly and shall withstand maximum wind speed of 160 km/hr. Total weight of the steel structure should not be less than 150 Kgs (each1 unit)

DC Cables: Supply and run 2 of 4sq.mm DC copper Cable PVC or XLPE insulated and PVC unsheathed single or multi core cable with minimum 6 sq.mm in suitable PVC rigid pipe on wall from PV array to DCDB