Tamilnadu Industrial Development Corporation Limited Tender
... More
Search from a plethora of business opportunities for Tamil Nadu tenders posted on the eProcurement TamilNadu website and other online and offline sources. Here, on BidAssist, you can find the best tender opportunities to boost your enterprise by finding work in Tamil Nadu government tenders, PSUs, Municipal Corporations and more. Read on to learn about the bidder registration process, DSC and more.
Tamilnadu Industrial Development Corporation Limited - TIDCO Tender
Eprocure
Opening Date21 Apr 2023
Closing Date18 May 2023
Tender Amount₹ 1,51,55,36,741
Costs
EMD
₹ 85,85,500Document Cost
Refer DocumentsTender Fee
Refer Documents
Summary
E-tender For Construction Of Fintech Tower At Fintech City, Nandambakkam Village, Alandur Taluk, Chennai
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2023_TIDCO_304413_1Bid Award Id
ViewTender No
TIDCO/Fintech Tower/2023-24Tender Authority
Tamilnadu Industrial Development Corporation Limited ViewPurchaser Address
-Website
http://tntenders.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Earth work excavation for foundation (for narrow excavation) in all soils and sub-soils as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the Project Officer with an initial lead of 10 mts and initial lift of 2 mts. and including necessary backfilling in layers of not more than 15 cm thick well rammed, watered and consolidated, clearing and levelling the site, etc., complete complying with standard specification.
470
-
-
... More
Refilling with excavated earth other than crushed stone sand with an initial head load of 100 mts. and depositing the earth as shown by the Project Officer in layers of not more than 15 cm thick well rammed, watered and consolidated etc. complete complying with standard specification
983
-
-
... More
Carting away surplus excavated earth beyond initial lead of 10 m to approved designated locations within site including loading, unloading and stacking as directed. Lead shall be various kilometers from source location to stock yard.
-
-
-
... More
Within 1 Km
45704
-
-
... More
Supplying and filling in foundation, basement, etc with filling crushed stone sand in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the Project Officer.
115
-
-
... More
Construction of granular sub-base by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401
526
-
-
... More
Providing, laying, spreading and compacting graded stone aggregates for Wet Mix Macadam 250mm thick, including premixing the materials with water at OMC in mechnanical mix plant, conveyance of mixed materials by tipper to site, laying in uniform layers using pavers in Sub Base/ Base course on well prepared surface and compacting with vibratory roller to acheive the desired density including cost of material, labour charges, rentals for machinery, fuel and all other incidental charges etc., complete as per clause 406 of MORTH Rev-5
521
-
-
... More
PART-2 ANTI TERMITE TREATMENT :
-
-
-
... More
Providing Pre-constructional Antitermite treatment including cost of chemical labour as per standard specification for preparing the area for treatment by spraying chemicals and other incidental charges etc., complete the rates should be for curing antitermite treatment from the plinth beam and brick masonry with super structure in contract with the back fill earth and at the junction of the walls. The top surfaces of filled earth for flooring and the soil along with the perimeter of the building by making holes with the crow bar and poured 5% termicide 'Chloripyrifos' and spraying the same termicide soultion on the wooden frames and treating the other periphery of building etc., Complete in all respects as per IS 6316 (Part II) and as directed by the Project Officer.
5656
-
-
... More
PART-3 CEMENT CONCRETE WORK :
-
-
-
... More
To meet the LEED certification, required ingredients such as fly ash/GGBS to be added in required proportion to meet the strength requirements.
-
-
-
... More
Cement Concrete 1:3:6 (One Cement, Three crushed stone sand and Six hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly inclusive of shoring, strutting, bailing out water, ramming, curing etc. complete in all respect by the Project Officer.
963
-
-
... More
Cement Concrete 1:4:8 (One Cement, Four crushed stone sand and eight hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly inclusive of shoring, strutting, bailing out water, ramming, curing etc. complete in all respect by the Project Officer.
42
-
-
... More
Reinforced Cement Concrete
-
-
-
... More
Providing and laying in position, Standardised Concrete Mix M-30 Grade in accordance with IS:456-2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cementcontent of 400 kg/m3 and maximum water cement ratio of 0.45, including admixture (plasticiser / superplasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5.0 cu.m.) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 cu.m.) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m') 7670 kg. of crushed stone sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the Project Officer. The coarse and fine aggregates to be used should comply with the requirements of IS Standards. (No separate payment will be made by the Department for the excess usage of materials).
-
-
-
... More
Foundation and Basement 02
11410
-
-
... More
Basement 01
1855
-
-
... More
For Podium 01
1524
-
-
... More
For Podium 02
666
-
-
... More
For Podium 03
997
-
-
... More
For First Floor
1093
-
-
... More
For Second Floor
1072
-
-
... More
For Third Floor
1071
-
-
... More
For Fourth Floor
1072
-
-
... More
For Fifth Floor
994
-
-
... More
For Sixth Floor
1065
-
-
... More
For Seventh Floor
1004
-
-
... More
For Eighth Floor
1120
-
-
... More
For Nineth Floor
869
-
-
... More
For Terrace Floor
1234
-
-
... More
Providing and laying in position, Standardised Concrete Mix M-40 Grade in accordance with IS:456-2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cementcontent of 440 kg/m3 and maximum water cement ratio of 0.40, including admixture (plasticiser / superplasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5.0 cu.m.) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 cu.m.) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m') 7670 kg. of crushed stone sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS Standards. (No separate payment will be made by the Department for the excess usage of materials).
-
-
-
... More
Foundation and Basement 02
288
-
-
... More
Basement 01
360
-
-
... More
For Podium 01
293
-
-
... More
For Podium 02
286
-
-
... More
For Podium 03
285
-
-
... More
For First Floor
353
-
-
... More
For Second Floor
336
-
-
... More
For Third Floor
336
-
-
... More
For Fourth Floor
337
-
-
... More
For Fifth Floor
336
-
-
... More
For Sixth Floor
336
-
-
... More
For Seventh Floor
336
-
-
... More
For Eighth Floor
327
-
-
... More
For Nineth Floor
329
-
-
... More
For Terrace Floor
59
-
-
... More
Providing and fixing factory made precast RCC perforated drain covers, having concrete of strength not less than M-25, of size 1000 x 450x50 mm, reinforced with 8 mm dia four nos longitudinal & 9 nos cross sectional T.M.T. hoop bars, including providing 50 mm dia perforations @ 100 to 125 mm c/c, including providing edge binding with M.S. flats of size 50 mm x 1.6 mm complete, all as per direction of Project Officer.
154
-
-
... More
Cement Concrete 1:2:4 (One Cement, Two crushed stone sand and Four hard broken stone jelly) using 20 mm gauge hard broken granite stone jelly for all RCC items of works excluding cost of reinforcement grill and fabricating charges, centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary and bearing surfaces of walls, beams etc. shall be finished smooth with Cement Mortar 1:3 (One Cement and Three Sand) and kraft paper laid over it without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers
40
-
-
... More
PART-4 FORM WORK :
-
-
-
... More
Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid over silver oak joists of size 10cm x 6.5cm spaced at about 75cm centre to centre or at suitable intervals etc.complete in all floors complying with standard specifcation. (Payment for centering shall be given after the concrete is laid).
-
-
-
... More
Footing, Plinth Beam, etc.
1404
-
-
... More
Providing Form work and centering for reinforced cement concrete works including supports and strutting up to 3.30m height for plane surfaces as detailed below with all cross bracings using mild steel sheets of size 90cmx60cm and MS 10 gauge stiffened with welded mild steel angles of size 25mmx25mmx3mm for boarding laid over silver oak or country wood joists of size 10cmx6.5cm spaced at about 90cm centre to centre supported by caurina props 10cm to 13cm dia spaced at 75cm intervals and removing the same after a specified period without damaging the RCC works etc., complete complying with standard specifications and as directed by the Project Officer.
-
-
-
... More
For plane surfaces such as RCC floor slab, roof slab, beams, lintels, bed blocks, landing slab, waist slab, portico slabs and beams, etc.
63414
-
-
... More
For plane surfaces such as vertical slab, side slabs of boxing, vertical drops, facia, vertical wall, etc.
11799
-
-
... More
For plane surfaces such as rectangular or square RCC columns, sunshades, top and bottom slab of RCC boxing, etc.
14339
-
-
... More
Centering for curved surfaces of all RCC items of work
7891
-
-
... More
Providing additional strutting to centering of RCC slabs of plain surface for every additional 1.0 metre height or part thereof but not less than 30 cm, over the initial 3.30 metre height from floor level using casurina props of 10cm to 13cm dia including cross bracing etc.,complete complying with standard specification and as directed by the Project Officer.
35998
-
-
... More
PART-5 REINFORCEMENT STEEL :
-
-
-
... More
Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel grills for all RCC works as per design given including cost of steel and G.I. binding wire in all floors etc. complete complying with standard specification. (Contractor has to make his own arrangements for the supply of steel and binding wire)
47135
-
-
... More
Applying one coat of anticorrosive treatment on steel reinforcement rods (20 ltrs. Of anitcorrosive chemical for one mertic tonne of steel reinforcement rods) at site including a cost of required quantity of anticorrosive chemicals, (best approved quality) cement, consumables such as brushes, gloves and labour for anticorrosive coating etc. complete and as directed by the departmental officers. (The Quantity and brand of anticorrosive chemaical should be got approved by the deportmentel office
4714
-
-
... More
PART-6 MASONRY WORKS :
-
-
-
... More
Masonry work using Autoclaved Aerated cement blocks of size 600 x 200x 200 mm in Self curing AAC Joint Mortar 2 to 3mm thick in between the blocks with a spread of 170Sqft / 50kg,cement Motar (1:6) (one of cement and six of M Sand) along the boundaries using AAC Block 600x 200x 200mm)minimum average crushing strength of 50Kg/sqcm for super structure in all floors including labour for fixing the doors , windows and ventilator frames in position fixing of hold fast , scaffolding ,curing etc complete in all respects complying with relevant standard specifications and drawings and as directed by the Project Officer. (The Board approved Acc Block should got approved by the competent authority before execution of work)
-
-
-
... More
Basement 02
99
-
-
... More
Basement 01
122
-
-
... More
For Podium 01
276
-
-
... More
For Podium 02
308
-
-
... More
For Podium 03
178
-
-
... More
For First Floor
294
-
-
... More
For Second Floor
291
-
-
... More
For Third Floor
291
-
-
... More
For Fourth Floor
296
-
-
... More
For Fifth Floor
274
-
-
... More
For Sixth Floor
283
-
-
... More
For Seventh Floor
285
-
-
... More
For Eighth Floor
317
-
-
... More
For Nineth Floor
296
-
-
... More
For Terrace Floor
108
-
-
... More
Solid Concrete blocks:Providing and constructing 200mm thick solid cement concrete block masonry work at all levels in cement mortar 1:4 using standard size of 400mm x 200mm of solid cement concrete blocks, with minimum compressive strength of 3 N/Sq mm confirming to IS 2185 or equivalent BS, all scaffolding, staging, curing, and including chicken mesh, etc all complete as per standard specification.
-
-
-
... More
Basement 02
6
-
-
... More
Basement 01
7
-
-
... More
For Podium 01
75
-
-
... More
For Podium 02
24
-
-
... More
For Podium 03
31
-
-
... More
For Commercial 01
99
-
-
... More
For Commercial 02
74
-
-
... More
For Commercial 03
74
-
-
... More
For Commercial 04
74
-
-
... More
For Commercial 05
74
-
-
... More
For Commercial 06
74
-
-
... More
For Commercial 07
74
-
-
... More
For Commercial 08
74
-
-
... More
For Commercial 09
73
-
-
... More
For Terrace Floor
10
-
-
... More
Solid Concrete blocks:Providing and constructing 150mm thick solid cement concrete block masonry work at all levels in cement mortar 1:4 using standard size of 400mm x 200mm of solid cement concrete blocks, with minimum compressive strength of 3 N/Sq mm confirming to IS 2185 or equivalent BS, all scaffolding, staging, curing, and including chicken mesh, etc all complete as per standard specification.
-
-
-
... More
For Podium 01
21
-
-
... More
For Podium 02
23
-
-
... More
For Podium 03
25
-
-
... More
For Commercial 01
69
-
-
... More
For Commercial 02
59
-
-
... More
For Commercial 03
59
-
-
... More
For Commercial 04
59
-
-
... More
For Commercial 05
59
-
-
... More
For Commercial 06
59
-
-
... More
For Commercial 07
59
-
-
... More
For Commercial 08
59
-
-
... More
For Commercial 09
58
-
-
... More
Solid Concrete blocks:Providing and constructing 100mm thick solid cement concrete block masonry work at all levels in cement mortar 1:4 using standard size of 400mm x 200mm of solid cement concrete blocks of thickness as given below, with minimum compressive strength of 3 N/Sq mm confirming to IS 2185 or equivalent BS, all scaffolding, staging, curing, and including chicken mesh, etc all complete as per standard specification.
-
-
-
... More
For Podium 01
33
-
-
... More
For Podium 02
68
-
-
... More
For Podium 03
98
-
-
... More
For Commercial 06
146
-
-
... More
Supply and installation of Modular Aluminium single glazed partitioning frame 45mm System of approved make, using 45mm x 25mm as top channel, wall starter, and 45mm x 25mmbottom channel attached to the True ceiling or suspended false ceiling.Partition Dimension – 45mm x 25mm. Finish – anodized sandblasted black matt finish. glass to glass butt joint with I jOINT aluminium finish and Plexy Dry joint (Clear). Glass type- 12mm thk toughened glass.Acoustic performance STC 28 TO 32 DB.Mode of Measurement : Glass measurement shall be considered for measurements irrespective of height .
295
-
-
... More
PART-7 WATER PROOFING :
-
-
-
... More
Note: All the waterproofing treatment shall be executed through a specialized waterproofing agency authorised by the approved manufacturer and/or Project officer/PMC. Contractor shall submit technical data sheet of each product, which shall use for execution.
-
-
-
... More
A written guarantee on non-judicial stamp paper shall be submitted by the main Contractor and his sub contractor who has carried out work for a minimum period of ten years from the certified date of completion for the satisfactory performance of the entire water-proofing system.
-
-
-
... More
water proofing works shall be executed under supervision of technical person of manufacturer. Contractor shall test all elements before and after water proofing treatment as directed by Project officer/PMC. Rate shall include for testing process before and after waterproofing treatment. The rate includes giving 10 year warranty for waterproofing on a Rs.100/- stamp paper in approved proforma.
-
-
-
... More
NOTES:
1.Ponding test shall carried out on the mother slab
2. Rectification shall be carried out in case of leakages like crack treatment, grouting etc. to arrest the leakage.
3. Ponding test shall be carried out once again to check for leakages.
4. Once there are no leakages, waterproofing treatment shall be carried out, else the procedure shall be repeated.
5. Payment will be only once for the water proofing
-
-
-
... More
Terrace Waterproofing
-
-
-
... More
Finishing the top of Terrace floor with one course of solar reflective water proof, heat proof and cool roof ceramic tiles of size 300mmx300mmx8mm thick of approved quality laid in cement mortor 1:3 (one part of cement and three parts of sand) over base concrete mixed with calcium based mineral powder (60 kg for 1000 sqft) (before laying tiles, the tiles should be dipped with salin based nano liquid) and top Grouting with cement mortar 1:3 (one part of cement and three parts of sand) mixed with white cement, silicon powder and polimer additives (20kg m 1000 sqft.) and joint pointed with zycosil oil (200gm for 1000 sqft.) after grouting acrylic salin based liquid including cost of base concrete 1:2:4 mix using 6-10mm chips 40mm thick etc., complete complying with standard specifications including cost of all materials, labour charges for lifting to open terrace, laying and finishing and other incidental charges etc., complete and as directed by the SIPCOT officers. (The Brand and quality of tiles should be got approved from the SIPCOT officer before using).
3821
-
-
... More
Grading For Terrace Floor with 1:2:4:
Plain Cement Concrete 1:2:4 (one cement, two crushed stone sand and four hard broken stone jelly) using 20mm jelly for wearing coat including laying, compacting, finishing and curing, etc., complete as per standard specificatins and as directed by the Project Officer.
287
-
-
... More
TOILET WATER PROOFING
-
-
-
... More
Providing Polymer Coating (Water Proof Coating) for sunken portion of toilet with following specification and the surface shall be cleaned to remove all dust, foregin, matters lose materials or any other deposits of contamination by rubbing with wire brush. Slurry: Dry blend and polymer liquid blend shall be mixed into the desired ratio as per recommendation of the supplier. The mix shall be stirred thoroughly until no bubbles remain in the mix. Any lumps found in mix shall be removed. Apply first coat of polymer modified cementitious slurry by brush on wet cleaned surface. After drying, second coat shall be applied on the first coat as directed by the Project Officer etc. The rate inclusive of cost of materials and labour, etc., complete.
1140
-
-
... More
Toilet Sunken using broken brick jelly 20 mm gauge The proportion of broken brick jelly to slaked lime being 1:3:6 (1part cement,3 part fine aggregate & 6 part broken brick jelly), well beaten by wooden beaters for giving required slope and thickness required etc complete complying with standard specifications and as directed by Project Officer.
469
-
-
... More
RETAINING WALL - EXTERNAL WALL SURFACES
-
-
-
... More
Supplying and Installing Membrane, a self adhesive, cold applied, flexible minimum 1.5mm thick waterproofing membrane comprising of a self adhesive bitumen compound laminated onto an impervious, non-perforated, cross laminated HDPE film applied on the external surface of the retaining wall post construction and after de-shuttering is done.
The membrane shall have following minimum properties : 1) Elongation of membrane (ASTM D638:1991) 40% 2) Good Puncture resistance 580N, 3) Resistance to Hydrostatic head of 60 m 5) Excellent Tear resistance 6) Good Tensile strength 7) Should be resistant to Sulphates, Nitrates and salt in soil
The item shall include sealing the construction joints, tie rod holes, honeycombs locations etc., using polymer modified non shrink waterproof cementitious mortar and carrying out injection grouting to the RCC surface at honeycombs, voids, cracks, leaking spots etc., in the raft etc., wherever required using hydro grout non shrink cementitious grouting compound. The item shall also include sealing around the base junction between the membrane and any other pipe / sleeve etc. using liquid applied polyurethane flashing system all as per the manufacturer's recommendation and providing and installing of Pressure release pipes of required dia and sizes as per site requirement and approved by Project officer/PMC. Providing & installation of aluminum termination bar minimum 200mm above finished floor level & shall be fixed with non corrosive fastener @ 4 no's per Rmt and sealing of termination bar with Sealant shall also in clude in the scope of work.
1895
-
-
... More
WATER TANK- INNER WALL AND SLAB
-
-
-
... More
Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush.
-
-
-
... More
The material shall meet the requirements as specified in ACI-212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the Project Officer. The product performance shall carry guarantee for 10 years against any leakage.
-
-
-
... More
For vertical surface two coats @ 0.70 kg per Sqm
1631
-
-
... More
For horizontal surface one coat @1.10 kg per Sqm.
673
-
-
... More
RAFT, ON TOP OF PCC
-
-
-
... More
Supplying and Installing waterproofing treatment for Raft using 1.2mm thick, pre-applied, fully bonded pure HDPE membrane over P.C.C.The system should be fully bonded to the RCC and consists of highly resilient HDPE film, self adhesive polymer layer and a trafficable granular layer. The membrane shall have minimum of 75mm side and end laps which shall be sealed with double sided adhesive tape. The size of the membrane should not be less than 1.2 Mtr. x 20 Mtr. to minimise the joints. This membrane shall be continued over the vertical surface upto minimum 300mm height above the Raft bottom and fixed as per recommendation. This shall include cleaning & removal of all the dust, dirt, oil, grease, cement laitance, loose particle & prepare the P.C.C. Substrate for laying of waterproofing system. The membrane shall have HDPE film of ≈0.9mm, Tensile Strength 25 MPa ASTM D412, Elongation at Break ≥ 500 % ASTM D412, Peel Adhesion to Concrete ≥ 1500 N/m ASTM D903, Puncture Resistance ≥ 1000 N ASTM E 154, Resistance to Hydrostatic Head 70m ASTM D 5385, Lap Peel Adhesion ≥ 1500 N/m ASTM D1876, Lateral Water Migration Resistance 70m ASTM D5385.
The item shall include sealing the construction joints, tie rod holes, honeycombs locations etc., using polymer modified non shrink waterproof cementitious mortar and carrying out injection grouting to the RCC surface at honeycombs, voids, cracks, leaking spots etc., in the raft etc., wherever required using hydro grout non shrink cementitious grouting compound. The item shall also include sealing around the base junction between the membrane and any other pipe / sleeve etc. using liquid applied polyurethane flashing system all as per the manufacturer's recommendation and providing and installing of Pressure release pipes of required dia and sizes as per site requirement and approved by Project officer/PMC. Providing & installation of aluminum termination bar minimum 200mm above finished floor level & shall be fixed with non corrosive fastener @ 4 no's per Rmt and sealing of termination bar with Sealant shall also in clude in the scope of work.
5966
-
-
... More
Note: All the waterproofing treatment shall be executed through a specialized waterproofing agency authorised by the approved manufacturer and/or Project Officer. Contractor shall submit technical data sheet of Eachproduct, which shall use for execution.
-
-
-
... More
A written guarantee on non-judicial stamp paper shall be submitted by the main Contractor and his sub contractor who has carried out work for a minimum period of ten years from the certified date of completion for the satisfactory performance of the entire water-proofing system.
-
-
-
... More
water proofing works shall be executed under supervision of technical person of manufacturer. Contractor shall test all elements before and after water proofing treatment as directed by Project Officer. Rate shall include for testing process before and after water proofing treatment.The rate includes giving 10 year warrenty for waterproofing on a Rs.100/- stamp paper in approved proforma.
-
-
-
... More
NOTES:
1.Ponding test shall carried out on the mother slab
2. Rectification shall be carried out in case of leakages like crack treatment, grouting,etc to arrest the leakage.
3. Ponding test shall be carried out once again to check for leakages.
4. Once there are no leakages, waterproofing treatment shall be carried out, else the procedure shall be repeated.
5. Payment will be only once for the water proofing
-
-
-
... More
Providing and applying Advanced Polyurea Waterproofing & Coating Systems in two parts for podium slab as per the specifications listed below and as approved by the Project officer/PMC with a guarantee of 15 years: The work shall include chasing open the construction joints and sealing the same to form a U shaped groove of approx. 20mm width and 20mm depth, using polymer modified mortar carrying out injection grouting at the construction joints, honeycombs, etc, by injecting cement slurry grout admixed with expandable grout additive to full saturation wherever necessary thereafter. Protection screed laid to slope. Only plan area shall be considered for measurements
1752
-
-
... More
a) Providing & applying 1.5mm thick pure polyurea waterproofing coating system for podium slab with all materials, labours, tools and tackles etc.
Step 1: (Surface Preparation): Cleaning the surface thoroughly as per the manufacturer's surface preparation requirements, free from loose materials and previous coatings if any Step 2: (Priming Coat): Providing and applying compatible epoxy primer as specified by the manufacturer (minimum 40 microns)
Step 3: (Polyurea coating): Providing and applying rapid setting, two component, spray applied,100% solids, Pure poly urea coating of DFT 1.5mm ( +/-0.1mm) in a single application with multiple passes using spray equipments approved by manufacturer's specifications b)Providing and placing Non woven polyester Geo Textile fabric (minimum 120 gsm) with minimum 75mm overlap on the ends and sides as a separation layer on top of waterproofing. c) Providing and laying a composite drainage board having a compressive strength of 600kg/Sqm, thickness as per manufacturer's specifications.
-
-
-
... More
PART-8 STRUCTURAL STEEL WORKS
-
-
-
... More
Note for items of this Section :
Contractor shall prepare shop drawing based on intent/ concept drawing and submit the same to Project officer/PMC for approval and shall get approval before mock up/ execution of work. Work shall be carried out as per final approved shop drawing and approved mock up. Contractor shall responsible against stability, safety, leakage, etc all complete. Testing work shall be carried out by the Contractor as suggested by Project officer/PMC.
-
-
-
... More
Providing, fabricating and fixing M.S. grills work for windows, gates, ladders, rail pipes, nosing angles, with M.S.lugs in staircase steps etc., made out of M.S rods, flats, angles, pipes, channels etc. including necessary fixtures complete as per drawings and specifications and as directed by theProject Officer
87142
-
-
... More
PART-9 MISCELLANEOUS WORK - STRUCTURE
-
-
-
... More
Providing and Placing in position suitable PVC water stops conforming to IS:12200 for construction/expansion joints between two RCC members and fixed to the reinforcement with binding wire before pouring concrete etc. complete
2482
-
-
... More
Supplying and laying of Rubber moulded hydraulic pressed Paver Block Stone 83mm thk. Over a base layer of crushed stone sandfilling incl. Cost of materials, laying and Labour charges etc., The Item shall include filling the gaps with crushd stone sand. Base layer of crushed sand stone shall be measured under seperate item.
3835
-
-
... More
Supplying and fixing of pre-cast kerb stone of size 450x300x150mm made in CC 1:3:6 (One of cement, three of sand and six of hard broken stone jelly) using 20mm size hard broken stone jelly including the cost of Kerb stone moulding, laying, curing, transporting, pointing and as directed by the Project Officer.
416
-
-
... More
Providing expansion joint in RCC floor slab for 12.5mm width using polysulphide as sealent on the top and bottom for a depth of 7.5mm each and packing the inner space using compressible non-absorbent filler materials including cost of labour for cutting and fixing filler materials and laying polysulphide sealent with necessary spatula etc., complete complying with standard specifications and as directed
24
-
-
... More
Supply fabrication and fixing of GI chain link fencing of size 2" x 2" using 10 Gauge Galvanised Iron Wire thick by using ISMC/angle section of 2.40 ht, 0.3m below FFL grouted with M20 grade concrete of size 0.3 x 0.3 x 0.60m at every 1.80m c/c and chain link frame of size made out of size 50 x 50 x 6mm angle all around and 50mm x 6mm flat at centre portion including one coat of primer two coats of enamel painting etc complete
281
-
-
... More
PART-10 FLOORING WORK :
-
-
-
... More
Note: Contractor shall submit flooring mockup as per the drawings and get approved by Project officer/PMC before execution of work.
-
-
-
... More
Paving the floor with best approved quality fine polished Steel Grey Granite Stone Slabs of size 1200 x 600 of 16 / 18mm thick of Synthetic Grey, Paradise and similar varieties with machine cut edges laid over a cement mortar bed of 20mm thick using cement mortar 1:3 (One cement and three crushed stone sand) fixing the slabs with required cement slurry and laid in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with mathcing colouring pigments etc., The granite stone slabs and other materials to be used shall be got approved by the Project Officer concerned before use on work, etc., complete as per standard speicification.
-
-
-
... More
Fine Polished/Leather finsh Steel Grey Granite Slab 1200 x 600 of 18mm thick
7710
-
-
... More
Suppling and laying of Stain Free Nano Polish Vitrified Tiles 600x600x8mm in CM 1:3 20mm thick including fixing in position, cuting the tiles to the required size wherever necessary, pointing the joints with grout (Tile joint filler) curing, finishing etc., all complete and as directed by the Project Officer.
1596
-
-
... More
Paving the floor with best quality Anti Vertified Tiles of size 600 x 600 x 10mm of approved colour, shade and quality laid in cement mortar 1:3 (one cement and three crushed stone sand) 20mm thick in all floors and the top pointed with the white cement mixed same colour pigments etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Project Officer before use on works)
2039
-
-
... More
Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding, and joints filled with acid and/or alkali resisting cement as per IS : 4457, complete as per the direction of Project Officer.
34
-
-
... More
In flooring on a bed of 10 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand)
-
-
-
... More
Providing granolithic floor finish of the following thickness with plain cement concrete 1:2:4 (One Cement, Two crushed stone sand and Four aggregate) using 10 to 12mm gauge hard broken stone jelly including laying, finishing and the top rubbed smooth with power trawl, thread lining, curing etc. complete complying with standard specification and as directed by the Project Officer. (The rate is inclusive of necessary planking for panelling wherever necessary and as directed by the Project Officer)
-
-
-
... More
For 60mm thick
24825
-
-
... More
Providing and laying 2mm thk vinyl flooring including joints to be perfect machine like straight cut without jagged edges, welded at joints. The Surface to be smooth and in level without any bubbles or creases. The rate to be inclusive of self levelling required due to undulations in the floor.
804
-
-
... More
Paving the floor with best approved quality fine polished Kota stone slabs of size 600 x 600 of 18 / 20mm with machine cut edges and matching marble slab not less than 100mm width other than Adanga Marbles as border laid over a cement mortar bed of 20mm thick using cement mortar 1:3 (One cement and three crushed stone sand) fixing the slabs in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with mathcing colouring pigments and polishing with floor polisher to a high degree of finish etc., The kota stone slabs and other materials to be used shall be got approved by the Project Officer concerned before use on work, etc., complete as per standard speicification.
-
-
-
... More
Using Fine polished Kota Stone Slab above 600 x 600 of 18 / 20mm size
832
-
-
... More
Raised flooring
-
-
-
... More
Providing and fixing removable raised/false access flooring with system and its components of
approved make for different plenum height with possible height adjustment upto 50 mm,
comprising of modular load bearing floor panels supported on G.I. rectangular stinger frame
work and G.I. Pedestal etc. all complete, as per the architectural drawings, as specified and as
directed by Engineer-in-charge consisting of:
(a) Providing at required spacing to form modular framework, pedestals made out of GI tube of
thickness minimum 2 mm and 25 mm outer diameter, fully welded on to the G.I. Base plate of
size 100mm x 100mm x 3mm at the bottom of the pedestal tube, G.I. pedestal head of size
75mmx75mmx3.5 mm welded with GI fully threaded stud 16mm outer diameter with two GI
Check nuts screwed on the stud for level adjustment upto 50mm, locking and stabilizing the
pedestal head in position at the required level. The pedestals shall be fixed to the subfloor
(base) through base plate using epoxy based adhesive of approved make or the machine screw
with rawl plug.
(b) Stringers system in all steel construction hot dipped galvanized of rectangular size
570x20x30x0.80mm thick having holes at both ends for securing the stringers on to the pedestal
head using fully threaded screws ensuring maximum lateral stability in all directions, the grid
formed by the pedestal and stringer assembly shall receive the floor panel, this system shall
provide adequate solid, rigid support for access floor panel, the system shall provide a
minimum clear uninterrupted clearance between the bottom of the floor for electrical conduits
and wiring etc. all complete as per the architectural drawings, as specified and as directed by
the Engineer-in-charge.
-
-
-
... More
(c) Providing and fixing Access Floor panel of 600x600x32 mm medium grade Filled Steel anti
static high pressure Lamination of 800H grade (FS800H). Access Floor panel shall be steel
welded construction with an enclosed bottom pan with uniform pattern of 64 hemispherical
cones. The top and bottom plates of Steel Gauges: top 0.6 mm and bottom 0.7 mm fused spot
welded together (minimum 64 welds in each dome and 20 welds along each flange). The panel
should be Corroresist epoxy coated for lifetime rust protection and cavity formed by the top and
bottom plate is filled with Pyrogrip noncombustible Portland cementitious core mixed with
lightweight foaming compound. The access floor shall be factory finished with Anti-static High
Pressure laminate with Non Warp technology upto 1mm thickness for superior adhesion and
Surface flatness within 0.75mm.The panel is to withstand a Concentrated Load of 363 kgs
applied on area 25mm x 25mm without collapse in the centre of the panel which is placed on
four steel blocks. The panel will withstand and Uniformly Distributed Load (UDL) minimum 1250
kg/sqm and an impact load of 50kg all complete as per the approved manufacturers
specification and as per the direction of Engineer-in-charge. All specification must be printed on
the side of the panel to ensure the quality of the product.
-
-
-
... More
450mm High
79
-
-
... More
300mm High
181
-
-
... More
150mm High
34
-
-
... More
Paving the floor with best approved quality fine polished Granite Stone Slabs of size 1200 x 600 of 18 / 20mm thick of Synthetic Grey, Paradise and similar varieties with machine cut edges laid over a cement mortar bed of 20mm thick using cement mortar 1:3 (One cement and three crushed stone sand) fixing the slabs with required cement slurry and laid in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with mathcing colouring pigments, including nosing etc.complete, The granite stone slabs and other materials to be used shall be got approved by the Project Officer concerned before use on work, etc., complete as per standard speicification.
89
-
-
... More
Supplying and installation of carpet flooring
12
-
-
... More
PART-11 FINISHING WORK :
-
-
-
... More
Plastering the surface of walls with Cement Mortar 1:5 (One cement and five plastering sand), 12mm thick in all floors including curing etc., complete complying with standard specification and as directed by the Project Officer.
32084
-
-
... More
Plastering with Cement Mortar 1:5 (One cement and Five sand), 12mm thick mixed with water proofing compound conforming to BIS at 2% by weight of cement used including finsihing, curing, etc., in all floors including necesary band, drip moulds, curing etc., complete complying with standard specification and as directed by the Project Officer.
1624
-
-
... More
Plastering with Cement Mortar 1:5 (One cement and Five Plastering sand), 20mm thick mixed with water proofing compound conforming to BIS at 2% by weight of cement used in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers.
1181
-
-
... More
Special ceiling plastering and finishing the exposed surface of all RCC items of work such as slabs, beams, sunshades, facia, canopy slab, staircase waist slab, landing slab etc., with Cement Mortar 1:3 (One Cement and Three Plastering Sand) 10mm thick including hacking the surfaces, providing cement mortar nosing, beading for sunshades, staircases, steps, landing slabs and curing, etc., in all floors complying with standard specification and as directed by the Project Officer
3563
-
-
... More
Supplying and painting the walls with two coats of wall putty as instructed by the Project Officer including preparation of surface curing, etc., complete in all floors complying with standard specifications (The wall putty shall be got approved by the Project Officer before use of work).
13731
-
-
... More
Supplying and Wall painting with two coats premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including one oat of primer wherever required to achieve even shade and colour.
13054
-
-
... More
Supplying and painting the walls with two coats of oil bound distemper over one coat of water based cement primer including cost for distemper, primer, cleaning and scrapping the walls, rendering the walls smooth with necessary putty, brushes, scaffolding arrangements, labour charges, etc., as per standard specification. (The colour and shade of the distemper shall be got approved by the Executive Engineer before use of work).
44119
-
-
... More
Painting the wall two coats with approved weather proof Exterior Emulsion paint over one primer coat of over cement plastered wall surface ect., complete complying with standard specification.
1206
-
-
... More
Dadooing walls with following best approved quality, 20mm thick steel grey polished granite of following sizes set in Cement Mortar 1:2 (One Cement and Two crushed stone sand) 10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 Kg. / sq.m. neatly in all floors, curing, etc., complying with standard specification and as directed by the departmental officers.
-
-
-
... More
20mm thick granite
1075
-
-
... More
Supplying and fixing of following best approved quality, white / colour glazed tiles of following sizes over cement 1:3 (one cement and three of sand) 20mm thick including fixing in position, cutting the tiles to the required size wherever necessary, pointing the joints with grout (Tile joint filler) curing, finishing etc., all complete and as directed by the Project Officers.
3729
-
-
... More
Providing& Fixing Frosted film of 3M or equivalent approved make as per design ,pattern of drawings on glass partitions as per manufaturer's specifications and as per approval of Engineer-In-Charge.Rate to include co-ordination with design consultants,vendors for design,preparing surface etc.complete.
21
-
-
... More
PET board for Acoustical treatment on wallProviding and fixing of plain 10 mm thick PET Acoustic Panels with size-1220mm x 2420mm/custom size with approved colour as per design, NRC-0.75 of approved make over existing partition/ wall including approved adheshive with all necessary hardware if required etc., complete as per the detail drawing, as per manufacturer's details, complete in all respect as per details and approval of Engineer-in-charge
395
-
-
... More
Supplying and installation of 10mm oughned glass with Back Painted finish
161
-
-
... More
PART-12 JOINERY WORK :
-
-
-
... More
Fire Rated Door
944
-
-
... More
Note for items of this Section :
Contractor shall prepare shop drawing based on intent/ concept drawing and submit the same to Engineer-in-charge for approval and shall get approval before mockup/ execution of work. Work shall be carried out as per final approved shop drawing and approved mock up. Contractor shall responsible against stability, safety, leakage, etc all complete.Testing work shall be carried out by the Contractor as suggested by Engineer-in-charge.
-
-
-
... More
Providing and fixing of Hollow metal 2 Hour fire rated doors as per IS 3614 part-1 & part-2 for stability and integrity. Pressed Galvanized steel confirming to IS 277 with the following specification. Recommended fire door shall have prototype tested by CBRI, Roorkee & Certificate issued thereof (as per IS:3614 Part-2, 1992) for rating of 2hrs with vision panel.
-
-
-
... More
Test certificates should be available for vision lites/ panels as part of the fire door assembly. Manufacturer test certificate shall cover doors both single & double leaf doors and Hardware should pass European certificate "CE" of conformity/ UL with required fire ratings. Proper label confirming the type of door and the hourly rating is mandatory. Approved manufacturer subject to Engineer-in-charge’s approval and should be ISO Certified company.
-
-
-
... More
a) Fire rated Door frame shall be double rebate profile of size 143 x 57 mm made out of 1.60mm minimum thick galvanized steel sheet. Frames shall be Mitered and field assembled with self tabs. All provision should be mortised, drilled and tapped for receiving appropriate hardware. Rubber door silencers should be provided on the striking jamb.
-
-
-
... More
Frames should be provided with back plate bracket and anchor fasteners for installation on a finished plastered masonry wall opening. Once frame installed should be grouted with cement & sand slurry necessary for fire doors on the clear masonry opening. EPDM Smoke seal shall be installed over frame. Frames shall be finished with approved shade powder coated paints with an average DFT of 70 microns and tested for salt spray test of 500hrs.
-
-
-
... More
Rate shall be inclusive of frame, back plate, rubber silencer, smoke seal, SS 304 anchor fastener, cement mortar grout filling finishing of frame and installation at all heights but excluding the cost of SS ball bearing hinges. Length of the door frame provided shall be measured in running metre for payment.
-
-
-
... More
b) Fire rated Door shutter shall be minimum 46mm thick fully flush double skin door with or without vision lite. Door shutter shall be manufactured from 1.2mm minimum thick galvanized steel sheet. The internal construction of the door should be rigid reinforcement pads for receiving appropriate hardware. The infill material shall be with resin bonded rockwool slab. All doors shall be factory prepped for receiving appropriate hardware and provided with necessary reinforcement for hinges, locks, and door closers.
-
-
-
... More
The edges should be interlocked with a bending radius of 1.4mm. For pair of doors astragals has to be provided on the meeting stile for both active and inactive leaf. Shutter shall be fixed to frame with 120 min fire rated SS 304 Ball Bearing Butt Hinges of size 100mm x 75mm x 3 mm CE marked (no of hinges shall be minimum 4). Shutter shall be provided with bottom seal of approved make as per manufacturer's specification.
-
-
-
... More
Vision lite wherever applicable should be provided as per manufacturer’s recommendation with a GI beading and screws from inside. Door shutter shall be finished with approved shade powder coated paints with an average DFT of 70 microns and tested for salt spray test of 500hrs. Rate shall be inclusive of shutter with infill material, SS304 fire rate butt CE marked hinges, finishing cost and installation but excluding the cost of Vision panel and all fire rated hardware other than hinge. Shutter area shall be measured for payment.
-
-
-
... More
c) Providing and fixing fixed vision panel glass in fire rated door as per manufacturers recommendation with beading powder coated to required shade & special ceramic tape/ gasket of approved make etc complete as directed by Engineer-in-charge. The glass should be 6mm clear borosilicate fire rated glass of 2 hour rating of approved make.
(Actual installed glass size (with two decimal) to be measured for payments).
-
-
-
... More
Providing and fixing 120 min fire rated Mortise sash lock pack of approved make with 70 mm Cylinder one side lock and other side Thumb turn with Lever CE marked for fire rated metal door with necessary fittings etc. complete as recommended by manufacturer and as directed by Engineer-in-charge.
-
-
-
... More
Providing and fixing Fire rated (120 minutes) Rack and pinion non-handed door closer of approved make and comply with EN size 2-4, with back check and standard arm with two independent closing valves and latching speed adjustable by arm. All adjustment screws face fixed with slide plate. The door closer shall be with Silver finish cover. The door closer shall conform to EN 1154 standards and CE marked with necessary fittings etc. complete as recommended by manufacturer and as directed by Engineer-in-charge.
-
-
-
... More
Providing and fixing 1 point panic device in Contour design of approved make, carry bar for single door for fire and smoke check doors, with steel latch, security anti thrust latch for door widths upto 1300mm, consisting of 2102F, 2105 in silver finish. As per EN 1125, CE marked etc. complete as recommended by manufacturer and as directed by Engineer-in-charge.
-
-
-
... More
Providing and fixing 1 point panic device in Contour design on active leaf and 2 point modular on inactive leaf, carry bar for rebated double door of approved make. For fire and smoke check doors, with steel latch, security anti thrust latch consisting of 2 x 2102F, 2 x 2105, PHX 04 and PHX 03 in silver finish. As per EN 1125, CE marked with necessary fittings etc. complete as recommended by manufacturer and as directed by Engineer-in-charge.
-
-
-
... More
Providing and fixing External trim with design lever handle approved make suiting the panic bar for fire and smoke check doors. For max. 60mm thick door prepared for half euro profile cylinder and in Silver finish with necessary fittings etc. complete as recommended by manufacturer and as directed by Engineer-in-charge.
-
-
-
... More
Flush door
-
-
-
... More
Overall 37mm thick laminated flush door shutter (bare thickness 35 mm) including Stainless Steel 304 grade butt hinges (with ball bearing) of size 100mm x 75mm x 3 mm conforming to relevant BIS/BS/EN standards with necessary screws etc complete. No of hinges shall be as per drawing.
444
-
-
... More
Single/Double shutter glass door
-
-
-
... More
Supply and installation of full height straight glass door 10mm thick toughened glass and proprietary powder coated aluminium sections of the approved make. The quoted rate shall be inclusive of Glass door soft nose seal of approved make for dust proof and to avoid A/c leakage in the doors at all-round. The seals should be suitable for 10/ 12mm glass thickness. Contractor has to prepare the shop drawing for the approval of Engineer in-charge.
Rate shall include for providing transport charges, handling, loading and unloading, Installation, protecting the module and glass till handing over, testing, commissioning all necessary hardware's, scafolding,wastage, Structural supports if any, etc. complete and all as per manufacturers specifications as directed.
47
-
-
... More
Supplying and erecting pull and push type rolling shutter with ISI make of approved size and section using 18 GI sheet. The shutter shall be painted with one coat of red oxide primer and the rate is inclusive of hood covers, transportation charges etc.,
-
-
-
... More
ROLLING SHUTTERS (WITH ISI MONOGRAM)
19
-
-
... More
Manually operated (up to 8 m2 area)
-
-
-
... More
ROLLING SHUTTERS (WITH ISI MONOGRAM)
104
-
-
... More
Gear Operated Type (from 8 sqm. to 12 sqm. Area)
-
-
-
... More
UPVC Ventilator
Specification:
Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the Project Officer before use on work
71
-
-
... More
Manufacturing, supplying and fixing of steel doors with the following specification M.S angles of a size 40x40x6mm are used for the outer frames and M.S. angles of size 35x35x5mm for the shutter frames stiffeners with 32x6mm M.S. flat is provided at required intervals in the shutter frames 18 gauge C.R. sheet is laid as panel in the shutter and welded intact for 1/3 bottom portion of the shutter. M.S. flat 18x5mm is welded over the 32x6mm M.S. flat sandwitching the CR sheet in between. Additional stiffener with 18x5mm M.S. flat is provided diagonally at the rear side of the shutter. The balance 2/3 portion at top is provided with grill at an average weight of 20kg/sq.m and 6 Nos hinges for double leaves shutter to be provided 6nos of holdfasts 120mm in length made of angle section spliced at the ends are welded to the outer frame of the door. Tower bolts 2nos. one at top and the other at the bottom arte provided one aldrop is provided at on appropriate place in the door. A Tie bar is provided at the bottom of the outer frame to prevent twisting of frame during transportation or fixing. All members are given one coat of red oxide primer as directed by the departmental officers. The rate includes cost of all meterials, labour charges, taxes, transportation to site of work, loading, unloading and all other incidental charges etc., complete.
149
-
-
... More
Supply and installation of Modular Aluminium single glazed partitioning frame 45mm System of approved make, using 45mm x 25mm as top channel, wall starter, and 45mm x 25mmbottom channel attached to the True ceiling or suspended false ceiling.Partition Dimension – 45mm x 25mm. Finish – anodized sandblasted black matt finish. glass to glass butt joint with I jOINT aluminium finish and Plexy Dry joint (Clear). Glass type- 12mm thk toughened glass.Acoustic performance STC 28 TO 32 DB.Mode of Measurement : Glass measurement shall be considered for measurements irrespective of height .
18
-
-
... More
Flush door
-
-
-
... More
Overall 37mm thick laminated flush door shutter (bare thickness 35 mm) including Stainless Steel 304 grade butt hinges (with ball bearing) of size 100mm x 75mm x 3 mm conforming to relevant BIS/BS/EN standards with necessary screws etc complete. No of hinges shall be as per drawing.
-
-
-
... More
Providing and fixing stainless steel 304 grade butt hinges (heavy weight) conforming to relevant BS / EN standard with stainless steel screws etc. complete of approved make and as approved by Engineer-in-charge.
-
-
-
... More
a) 125 x 64 x 2.5mm
-
-
-
... More
Providing and fixing chromium plated SS 304 grade handles with necessary screws etc. complete:
-
-
-
... More
a)125 mm
-
-
-
... More
Providing & fixing of specified height SS 304 brush finish Tower bolt (barrel type) of approved make in wooden doors/ aluminium doors/ metal doors with necessary screws etc complete as approved by Engineer-in-charge.
-
-
-
... More
200mm x10 mm rod size
-
-
-
... More
Providing & fixing of specified height SS 304 satin chrome finish lever action flush bolt of approved make in wooden doors with necessary screws etc complete as approved by Engineer-in-charge.
-
-
-
... More
172mm x19 mm rod size
-
-
-
... More
Providing & fixing SS 304 brush finish solid Door Stopper with magnet, fixed type, wall mounted of approved make with necessary screws etc. complete as approved by Engineer-in-charge.
-
-
-
... More
b) 60 mm length
-
-
-
... More
Providing & fixing SS 304 satin Chrome finish floor stop half dome with 45mm dia with fixing accessories of approved make with necessary screws etc. complete as approved by Engineer-in-charge.
-
-
-
... More
PART-13 FALSE CEILING WORK
-
-
-
... More
Note : Contractor shall take approval of the mock up from Project officer/PMC before execution of work.
-
-
-
... More
Supply of material and labour for Mineral fbre 600mmx600mm Grid false ceiling work
847
-
-
... More
Supply and installationi of Anutone (or) Equivalent Brand of Acoustical False Ceiling of Sisoli Serene / Slate Spirts / State Polka Mineral Fibre / GRG Core Ceiling Tiles of size 595 x 595 x 15mm having volume density 270Kgs/m3, weight 4 kg/m2 which is suspended by using 0.3mm thick skelet trelis T15 metal grid system. The Skelet trelis T15metal grid system of 600 x 600mm module includes skelet WA15 W30 wall angel with unequal flanges of 15/19mm, length 3000mm, fixed along the perimeter of walls with the help of nylon sleeves and suitable fasteners at 300mm centers. Then suspend the skelet MT15 W36 MainT wtih flange width 15mm, height 32mm and length 3600mm, , from the soffit slab with help of soffit cleat and wire rod with leveling spring clip at 1200mm centres. Skelet CT15 W12 CrossT with flange width 15mm, height 26mm and length 1200mm is interlocked into the pre-cut slots in the Main T15 at 600mm centers in the perpendicular direction to the Main T15. Finally, the skelet CT15W06 CrossT with flange width 15mm, height 26mm and length 600mm are interlocked into the precut slots in the CT15W12 CrossT in direction parallel ot the Main T15 to result in 600 x 600mm module. Sisoli Serene / Slate Sprits / Slate Polka of size 595 x 595 x 15mm shall be placed into the grid size of 600 x 600mm. The systems to achieve noise reduction coefficient not less than 0.5 NRC, so as to have an neat appearance as directed by the department offices. The cost includes, cost of material, cost of labour, scaffolding, transportation, conveyance etc. complying to standard specification.
464
-
-
... More
8mm thick Calcium Silicate Board Designed and Perforated for False Ceiling
503
-
-
... More
Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with :
495
-
-
... More
12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks)
-
-
-
... More
Slat ceiling:
3656
-
-
... More
Supply & installation of Slats of 50x2440x100mm made of pinewood E1 grade fiberboard, melamine/veneer laminated finish, groove perforated slats (2mm grooves @16mm pitch with 27% open area), backlined with acoustical fleece of 0.27mm thick, surface density 63 g/m2, tongue-groove edge for a seamless look, 5-test fire retardant grade, size 128 x2440x16mm, volume density of base board 700 kg/m3, weight 9 kg/m2 installed by using ceiling suspension system.
-
-
-
... More
Technical Parameters:
-
-
-
... More
• Fire (Class) – 1 & P
• Acoustics – NRC 0.75
• Thermal conductivity (W/mk)– na
• Climate (°C, RH) – 50, 70
• Light reflectance (%) – 75
• Green (VOC, RC %) – E1, 25
-
-
-
... More
Specification for the ceiling remains same as above but with suspension system as below.
-
-
-
... More
The Strut ceiling framework system shall include suspension of Main channels, fully knurled, sectional thickness 0.8mm, length 3600mm, equal flanges of 15mm and web 45mm from the soffit at 1200mm centers with Struts, fully knurled, Suspender angle with sectional thickness 0.55mm, unequal flanges of 25 & 10mm. Cross Channel having thickness 0.7mm, length 3600mm, knurled web 50, depth 50mm and equal flanges 15mm is fastened to the Strut perpendicularly at 600mm centers. PVC Vinyl core UV treated Spline having sectional thickness 2mm and length 2400mm to be fixed perpendicular to the Strut Cross channel at 600mm centers. PVC Vinyl core UV treated Spline is installed at wall periphery bearing free edges of panels. The Kerfed edge Strand Colour panels shall be then inserted into the spline along their long edges of 1200mm against framework to perfect fit with staggered short edges.
-
-
-
... More
Providing and fixing of the real wood batten of size 25 mm x 25 mm with venner finish. The ceiling to be supported from the true slab with necessary supports .The wood to be treated with anti termite treatment at factory. The battens to be finished at factory to achieve a smooth surface. Only matte lacquered finish at site. Contractor to show mock up of finished wood as per design, type of wood to be selected by architect based on requirement ranging from teak, walnut, oak wood to match the design renderings. Rate to be inclusive of the supports from the true slab .Note: For quantification plan area to be measured.
68
-
-
... More
Same specification above but Laminate/Veneer ceiling as per design
35
-
-
... More
PART-14 MISCELLANEOUS WORK - ARCHITECTURAL
-
-
-
... More
Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance, electrical charges, etc.complete
109
-
-
... More
Providing and fixing of the change room cubicle of size - 1200 x 1600 x 2100 mm
166
-
-
... More
DESIGN: Moisture resistant solid grade laminate pan-els build as a sandwich element by an alumi-num frame.Absolutely moisture resistant, rot proof, scratch and impact resistant.36 mm thick, solid sandwich construction build by an integrated aluminum frame (plas-tic frames are notpermitted), with a 3 mm solid grade laminate panel on both sides and a filling expanded polyurethane-foam.is moisture resistant. Non FCKW-H. Fillings made of polystyrene, polyurethane plates and paper combs are not permitted.Filling with aluminum combs are permitted.Panels have to have an additional overlay for a better surface protection.Vertical edges of elements (door and side walls) are made by a rebated aluminum pro-file.The head section is recessed by 150 mm. Sturdy aluminum holders in connection with solid aluminum brackets ensure the system's necessary stability and resistance to warp-ing. An aluminum head rail 30 x 30 mm runs 150 recessed along the top of the front wall to lend stability to the system.Wall connections are by means of aluminum-U-profiles as a shadow gap.
-
-
-
... More
DOORS:
-
-
-
... More
Construction of doors corresponds to the front wall. Interior rebated door catcher flush integrated into wall section. Integrated rubber buffer lips for silent operation. Glued on buffers or any other tapes for silent operation are not permitted
-
-
-
... More
HARDWARE:
-
-
-
... More
Self-closing doors through two aluminum gravity hinges which are screwed into the rabbet, gravity inlet out of high-performance polymers. Door opening apex angle max. 180°.Lock with zinc latch and stainless steel bolt. door knob out of aluminum. Knob-set with vacant/engaged indicator screwed throughout and an emergency unlocking device for emergency key.
-
-
-
... More
FEET:
-
-
-
... More
Necessary feet made of stainless steel and recessed back 150 mm in connection with anodized aluminum holder.For the necessary stabilization of the front elements a T-connector is screwed into the partition and front wall.Solutions without an additional T-connector are not permitted.
-
-
-
... More
STANDARD ACCESSORIES:
-
-
-
... More
One coat hook and one door buffer per cu-bicle.
-
-
-
... More
COLORS:
-
-
-
... More
Panels and hardware according to manufacturer's color-chart. Frame profiles and all other profiles and fittings natural anodized aluminum (E6/EV1).
-
-
-
... More
HEIGHT:
-
-
-
... More
Standard height 2080 mm incl. 100 mm floor clearance.
-
-
-
... More
Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth
-
-
-
... More
Granite Stone of approved shade
84
-
-
... More
Providing and applying 2.5 mm thick road marking strips (retro- reflective) of specified shade/ colour using hot thermoplastic material by fully/ semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of Engineer-in-charge and accordance with applicable specifications.
616
-
-
... More
Supplying and fixing of 900mm high Column Corner Guard
607
-
-
... More
Provididng and Fixing of Aluminium wall guard on sides of the Walls etc as per the instructions of the Project officer
344
-
-
... More
Supply & fixing of 2 hour rated self expandable, UL approved, Fire sealant material suitable for sealing electrical cable try pipes etc. entry cut-outs in concrete/brick wall/ceiling etc as required. Make: 3M, Hiti or Promat., as per the instructions of the Project Officer.
10
-
-
... More
PART-15 FAÇADE & GLAZING WORK
-
-
-
... More
Note for items of this Section:
Designing, providing, fabricating, testing, protection, installing and fixing in position of façade/structural glazing system for all heights and all levels is in the scope of contractor.
The façade/glazing system shall be designed for wind load and contractor shall prepare shop drawing based on intent/ concept drawing along with design calculation considering all parameters and submit for the approval of Project officer/PMC and shall get approval before mockup/ execution of work. The design calculation of façade/glazing system shall consist of load calculations, design methodology, design of various elements, analysis models such as ETABS/STAAD etc. and contractor shall submit the same to Project officer/PMC and get it approved by Project officer/PMC before proceeding with execution of work. Shop drawings shall be prepared for the specified design loads conforming to IS 875 part III (the system must pass the proof test at 1.5 times design wind pressure without any failure). Work shall be carried out as per final approved shop drawing and approved mockup. The work shall include cost of all mockups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working structural glazing as specified, cleaning and protection till the handing over of the building for occupation. Contractor shall provide a watertight structural glazing/facade having all the performance characteristics etc. all complete as required, as per the intent drawing, as per item description, as specified, as per the approved shop drawings and as directed by the Project officer/PMC. Contractor shall responsible against stability, safety, leakage, etc all complete.
-
-
-
... More
Unitized Structural glazing System with Vision/Spandrel glass
-
-
-
... More
Design, supply and install unitized four sided structural glazing system curtain wall custom designed to match the elevation and withstand the design wind pressure of 2.5 kPA confirming to IS -875 part III.The system must pass the proof test at 1.5 times design wind pressure without any failure, with silicon gaskets in exposed grooves and microwave cured EPDM gaskets in unexposed area, structural and weather sealants of Dow Corning or approved make, spacer tape,backer rod, Bracketing system with MS /aluminium alloy of 6005 T6 brackets designed to accommodate three dimensional movements with serrated plate and serrated washers, SS 316 grade fasteners and anchor bolts of approved make, nylon separators to prevent bi-metallic corrosion, flashings to seal the gaps between curtain wall and the building structure all complete required to perform as per specification and drawing in conjunction with BOQ.
-
-
-
... More
The system design shall be based on Non-thermal break principles. The system design shall include pressure equalization with Five barrier gaskets for improved thermal performance and weather performance, drainage at all floor level thru bottom subcill gutter profile, spandrel panel shall have pressure release & condensation drainage provisions, to accommodate building movements, thermal expansions and the seismic movements. All metal joints in the wet area shall be small joint sealant applied to ensure water tightness.
-
-
-
... More
Each glass panel shall be structurally glazed on the main unitised panel profiles. Each glass panel shall be supported for dead load at the bottom of glass in main Unitize system.
-
-
-
... More
The system shall be designed of floor height units with wind resistance subcill gutter at floor level and wind load & Dead load bracket at top with provision to accommodate movement at all floor levels and at every grid panels horizontally.The system shall be designed to accommodate 32 mm thk.DGU in vision area with DGU ( 8mm-12mm-8mm ) with SHGC – 0.24 VLT – 40% U value – 1.8 W/sqmt K /8mm SGU in Spandrel area (Colour to be matched with Vision panel). System shall accomodate openable panel as per architectural requirment in the unitised system as per the design drg. All fix vision glass and openable shall look similar in the elevation.
-
-
-
... More
The design of drain gutter profile container shall be deep enough to contain and drain water entering 2nd barrier. The design shall also provide slope in gutter profile with drain slots of sufficient size.
-
-
-
... More
The complete system shall demonstrate performance for air seal / water seal / structural /seismic requirement .Onsite test for workmanship verification shall be carried out in stages for water penetration hose test as per AAMA 501.2 at minimum 6 locations.
-
-
-
... More
The extruded aluminium sections of Alloy 6063 T5 / T6 & tolerances confirming to DIN / EN standard from approved extruder. The structural profiles shall have minimum wall thickness to satisfy structural stability. All the profiles shall have minimum 60 -80 microns powder coating finish as per AAMA 2604 specification with powder from Akzonoble / Jotun. The non visible aluminium surfaces shall have minimum chromatizing treatment.
-
-
-
... More
All shade approval shall be as per Engineer-In-charge Approval.
-
-
-
... More
The quote rate shall include all design, engineering & shop drawing approval of all size/shape panels including the curved panel as per building profile and approval from Engineer-in-charge. The quote rate shall include all statutory obligations and safety code compliance as per PMC.
-
-
-
... More
Unitised curtainwall system
-
-
-
... More
Quote rate only for Complete system in Unitized system with Panel width module of 1600mm
11945
-
-
... More
Vision Glass: 32mm thk. DGU structurally glazed (8mm thk 765 SKN Reflective Heat strengthened glass + 16mm Air Gap + 8mm thk Heat strengthened glass)with SHGC – 0.24 VLT – 40% U value – 1.8 W/sqmt K
-
-
-
... More
Quote rate DGU Glass with Panel width module of 1150mm
5654
-
-
... More
Spandrel Glass: SGU 8mm ST767 Reflective Heat strengthened glass (Colour to be matched with Vision panel)
-
-
-
... More
Quote rate SGU Glass with Panel width module of 1600mm
6291
-
-
... More
Spandrel Insulation: Extra over for item 1a for providing & fixing the shadow box in the spandrel panel with 1.2mm Thk G.I.sheet cover with Rockwool insulation of minimum 50 kg/m3 density & minimum 50mm thick firmly held in the G.I.supporting tray of 1.2mm thk for spandrel areas @ required location indicated in the facade tender drawing. The fixing of Rockwool Slab on to the G.I. Tray by means of special pins rigidly holding Rockwool Slab.Exposed spandrel back pan should be of 1.2mm thick G.I. sheet tray with powder coating of minimum 60 microns , along with transom sightlines as per design intent along with perimeter seal. Conceal back pan shall be powder coated finish.
6026
-
-
... More
Extra over for Hardware for Top Hung openable: Quote extra rate over the item no:1 (a) above the glazing for designing, providing and fixing hardwares for openable outward shutter having Heavy duty Multi point lock with required points based on the window panel size and handle with or without key with detachable Cotswold /Alualpha or approved equivalent make, SS friction hinges , Corner Transmission , corner locking point and restrictor stay arm assembly of Cotswold/Securestyle (UK) make or approved equivalent make and as per particular specification. Rate shall exclude cost for supplying and fixing of glass and main frame, but include cost of hardwares .
-
-
-
... More
Extra for top hung with panel width module of 1600mm
1584
-
-
... More
Structural Steel for Terrace glazing:
-
-
-
... More
Providing, fabricating and erecting structural steel members with one coat of primer and 2 coats of epoxy paint as per the requirement. The rate quoted should be inclusive of cutting and welding to required shape and size as mentioned in approved shop drawings with necessary required framing,fittings,same paint finish and fixtures. Rate shall include cost of materials, labour, loading and unloading, transportation, scaffolding, floor covering, masking tape and cleaning the area, Surface preparation and all other incidental charges, etc., complete working at all heights/ levels as per drawing, design & manufactures specs and upto the entire satisfaction of Engineer in Charge.
20
-
-
... More
Aluminium Vertical Fins
-
-
-
... More
Design, Supply, Fabrication and Installation of ALU. FIN 75mmX250mmX2.5T vertical Aluminium Fins using aluminium extruded sections of 6063 grade alloy -T6 tempered along with other standard hardwares, fittings etc complete as per design, details and specification given in the drawing and approved by the Engineer-In -Charge . All the profiles shall have minimum 60 -80 microns powder coating finish as per AAMA 2604 specification with powder from Akzonoble / Jotun or approved equivalent make .The rate shall be inclusive of applying sealant if any, all consumables, as required , labours etc complete.
-
-
-
... More
Aluminium Vertical fin of 1600 module
8975
-
-
... More
Horizontal Sunshade
-
-
-
... More
Providing and fixing Aluminium horizontal Sunshade using Aluminium projection profile of size 75mmX675mmX6T with 2mm solid sheet and anchoring using HILTI or other approved anchor bolts at all height and levels including staging, labour etc. complete.The Aluminium profiles shall be polyester powder coated with approved colour . The thickness of powder coating of 60-80 microns from Akzonobel/Jotun or approved equivalent make as per approval of Engineer -in-charge.
3525
-
-
... More
3mm Aluminium Perforated Sheet
-
-
-
... More
Design, Fabrication, Supply, installation, Testing , protection, cleaning & handover of 3mm thk Aluminium perforated solid sheet cladding approved make in solid or metallic colours as per Engineer -In -Charge approval Using grid work of prefabricated aluminium extruded sections to with stand the design wind pressure confirming to IS -875 part III. The fastening brackets of Aluminium alloy 6005 T5 / MS with HDG , Aluminium grid work to be fix to brackets, fasteners and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing in conjunction with BOQ.All the profiles shall have minimum 60 -80 microns powder coating finish as per AAMA 2604 specification with powder from Akzonoble / Jotun or approved equivalent make.
-
-
-
... More
3mm Alu. Perforated Cladding (1600 Module)
920
-
-
... More
Main Entrance Spider Glazing
-
-
-
... More
Design supply & installation of suspended Spider Glazing system designed to withstand the wind pressure as per IS 875 (Part-III). The Suspended System held with Spider Fittings of SS-316 Grade Steel of approved manufacturer Dorma or approved make with glass panel having 17.52 Laminated (8mm Clear heat strengthened glass+1.52 Clear PVB+8mm Clear heat strengthened glass held together with SS- 316 Grade Stainless steel (Satin finish)Spider & bolt assembly with laminated glass fins 21.52 Laminated (10mm Clear heat strengthened glass+1.52 Clear PVB+10mm Clear heat strengthened glass The Glass fins and glass panel assembly shall be connected to Slab/ beams by means of SS- 316 Grade stainless steel (Satin Finish)brackets & Anchor bolts and at the bottom using Aluminium channel of35x75x3mm using fastener & anchor bolts, non staining weather sealants of approvedmake, Teflon/ nylon bushes and separators to prevent bi-metallic contacts, MS structure at top level with PU paint finish all complete to perform as per specification and approved drawings. The complete system to be designed to accommodate thermal expansion & seismic movements etc. The joints between glass panels (6 to 8 mm) and gaps at the perimeter & in U channel of the assembly to be filled with non staining weather sealant, so as to make the entire system fully water proof & dust proof.
-
-
-
... More
The rate shall include all design, Engineering and shop drawingincluding approval from structural designer, labour, T&P, other incidental charges including wastage, enabling temporary services all fitting fixers nut bolts, washer, Buffer plates, fastener, anchors, laminated glass etc. all complete. For the purpose of payment, actual elevation area of Glazing including thickness of joints and the portion of Glass panel inside the aluminium channel shall be measured.
-
-
-
... More
The quote rate shall include all design, engineering & shop drawing approval from Engineer-In-charge & consultant. The quote rate shall include statutory obligations and safety code compliance as per Tender Conditions.
146
-
-
... More
Patch fitted door
-
-
-
... More
Fabricate, package, deliver (to Job site) and install with 12mm thk. Clear Toughened Glass with Double Leaf Frameless Glass Swing Doors with Dorma or Equivalent Mechanism as per Tender drawings. & detailed specifications including erection & removal of scaffolding, cleaning the Facade. The contractor must design the system as per the prevalent site conditions and building elevation profiles. The design to have provision for water drainage.
Door Glass - 12mm Thick Clear Toughened Glass
Double leaf Door Size : 2000mm X 2400mm Hardware Fittings: Double leaf Frameless Glass doors with all necessary Floor Springs, Pivots, Lock Patch, Patch fittingsr and Handles, etc. all from DORMA or Approved equivalent including all fixing supports and hardware accessories
3
-
-
... More
ACP Cladding at Copping & Refuge Ceiling
-
-
-
... More
Providing, supplying, fabricating and fixing panel of aluminium composite panel cladding in approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core (having 2 hours fire resistance in accordance to ASTM E119-12 and EN13501-1 Class B, s1 d0) sandwiched between two Aluminium sheets (each 0.5mm thick of AA5005 grade). The Aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF based fluoropolymer resin (having 70:30 ratio of PVDF and Acrylic) coating of approved colour and shade on top face and polymer (Service) coating on bottom face as specified using and fixed over aluminum frames. The panel thus pre-fabricated are to be fixed to suit site conditions. The aluminum panel to be pre-coated with highly weather resistant coating of fluro carbon (PVDF) which can withstand solar radiation and industrial pollution. The main frame work to be fixed to RCC surface, masonry to form suitable grid and aligned to perfect level and form. The aluminum composite panels then to be fixed to the main frame leaving uniform gap of not more than 12mm between adjacent panels and to match adjacent glazing gaps. This gap to be made suitable as weather sealed junction with using exposed sealant surface. With appropriate arrangement for drainage and proper covering for the same as engineer-in-charge approval.
-
-
-
... More
The rate shall include aluminum sub frame required to form panel, wastages, transportation,etc. complete.
-
-
-
... More
Using ACP sheet total thickness - 4mm
2200
-
-
... More
Design, Fabricate, package, deliver (to Job site), install & commission Angle Guide BMU with 2m Powered Platform System.
All the cost estimation & work execution should be done in accordance with specification manual & to meet the performance
and structural requirements.
Angle Guide BMU with 2m Powered Platform Access System & Scaffolding with Long Pole System.
1
-
-
... More
PART-16 LANDSCAPE WORKS
-
-
-
... More
SOFTSCPE WORKS
-
-
-
... More
Site cleaning, soil restoration and earthworks
-
-
-
... More
Uprooting rank vegetation and weeds by digging the area to a depth of 60 cm, removing all weeds and other growth with roots by forking repeatedly, breaking clods, rough dressing, flooding with water, uprooting fresh growths after 10 to 15 days and then fine dressing for planting new grass, including disposal of all rubbish with all leads and lifts.
90
-
-
... More
Good garden soil
-
-
-
... More
Supplying and stacking of good earth at site including royalty and carriage upto 5 km complete (earth measured in stacks will be reduced by 20% for payment).
45
-
-
... More
Rough dressing
-
-
-
... More
Rough dressing the trenched ground including breaking clods.
149
-
-
... More
Fine dressing
-
-
-
... More
Fine dressing of the ground.
149
-
-
... More
Mixing and spreading of good soil and mannure
-
-
-
... More
Spreading of sludge, dump manure and/or good earth in required thickness as per direction of officer-in-charge (cost of sludge, dump manure and/ or good earth to be paid separately).
45
-
-
... More
Cow dung manure
-
-
-
... More
Supplying and stacking of well decayed cattle manure at site including royalty and carriage upto 5 k.m. lead complete (cattle manure measured in stacks will reduced by 8% for Payment).
45
-
-
... More
Shrubs, Hedges and groudcover plantation
-
-
-
... More
Preparation of beds for hedging and shrubbery by excavating 60 cm deep and trenching the excavated base to a further depth of 30 cm, refilling the excavated earth after breaking clods and mixing with sludge or manure in the ratio of 8:1 (8 parts of stacked volume of earth after reduction by 20% : one part of stacked volume of sludge or manure after reduction by 8%), flooding with water, filling with earth if necessary, watering and finally fine dressing, leveling etc. including stacking and disposal of materials declared unserviceable and surplus earth by spreading and leveling as directed, within a lead of 50 m, lift up to 1.5 m complete (cost of sludge, manure or extra earth to be paid for separately)
240
-
-
... More
Plantation of Trees, Shrubs, and Hedge at site i/c watering and removal of unserveiceable material’s as per direction of officer in charge (excluding cost of plant & water)
-
-
-
... More
Shrubs Plant
1056
-
-
... More
Supply and stacking of Shrubs/ Ground-cover species
-
-
-
... More
Providing and stacking of Clerodendrum inerme of ht. 20 cm to 30 cm multi branched in 15 cm size of Earthen Pot / Plastic Pot & as per direction of the officer-in-charge
334
-
-
... More
Providing and displaying of Raphis palm specimen having ht. 1.50 m to
1.65 m with 40 to 50 lush green suckers, well developed, fresh & healthy
foliage leaves in 40 cm size of Earthen Pot/Chali/Tray & as per direction of the officer-in-charge.
176
-
-
... More
Providing and Displaying Bougainvillea named variety, Sobhra, Thima, Marry
palmar, Cherry Blossom etc. well developed with fresh & healthy bushy in full bloom 75 to 90 cm ht. in 40 cm Cement Pot as per direction of the officer-in-charge.
3
-
-
... More
Providing and displaying of Areca Palm having ht. 2.40 m to 2.70 m with 12 to 14 suckers, well developed, fresh and healthy with lush green foliage in 35 cm size of Bucket type cement pots & as per direction of the officer-in-charge.
49
-
-
... More
Providing and Displaying of Spathiphyllum (peace lily), having 15 cm to 25 cm ht. blooming stag with fresh & healthy foliage well developed in 15 cm
of Earthen pot/plastic pot as per direction of officer-in-charge
117
-
-
... More
Providing and stacking of Iresine herbstii, of height 25-30 cm., full of branches well developed in 15 cm size of Earthen Pot/Plastic Pot & as per direction of the officer-in-charge.
377
-
-
... More
Providing and stacking of Ficus benjamina (green) of height 150-165 cm., bushy with healthy branches and lush green foliage in big size HDPE bags as per direction of the officer-in-charge
23
-
-
... More
Providing and Displaying Bamboo Buddha vally variety with umbrella shape plant having 120 to 135 ht. with fresh & healthy foliage well developed in 40 cm Cement pot multy branch, bushy plant as per direction of the officer-in-charge.
8
-
-
... More
Tree plantation
-
-
-
... More
Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any, with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for separately) :
-
-
-
... More
Holes 90 cm dia, and 90 cm deep
34
-
-
... More
Plantation of Trees, Shrubs, and Hedge at site i/c watering and removal of unserveiceable material’s as per direction of officer in charge (excluding cost of plant & water)
34
-
-
... More
Supply and stacking of Tree species
-
-
-
... More
Providing and stacking of Bauhinia purpurea (Kachnar) of height 150-165
cm. in big poly bags of size 25 cm as per direction of the officer-in-charge.
2
-
-
... More
Providing and stacking of Alstonia scholaris of height 150-165 cm. in bag
of size 25 cm as per direction of the officer-in-charge.
5
-
-
... More
Providing and stacking of Foxtail palm of ht. 240-270 cm bottom girth 35-
40 cm well developed in big size HDPE bags as per direction of the
officer-in-charge
6
-
-
... More
Providing and stacking of Spathodea campanulata of height 150-165 cm.
in big poly bags of size 25 cm as per direction of the officer-in-charge.
4
-
-
... More
Providing and stacking of Ficus benjamina (green) of height 150-165 cm., bushy with healthy
branches and lush green foliage in big size HDPE bags as per direction of the officer-in charge.
15
-
-
... More
Providing and stacking of Bottle palm of ht. 270-300 cm bottom girth 40-50
cm well developed in big HDPE bags as per direction of the officer-in-charge
2
-
-
... More
POTS
-
-
-
... More
YUCCABE ITALIAPCUP H 40" DIA 40"
72
-
-
... More
YUCCABE ITALIAGT L 36" W 13" H 14"
14
-
-
... More
YUCCABE ITALIACILIN H 15" DIA 15"
25
-
-
... More
YUCCABE ITALIAKTR H 25" DIA 51"
11
-
-
... More
PEBBLES
-
-
-
... More
River washed white and grey pebble ( 60-120 mm dia)
1860
-
-
... More
SOFTSCPE WORKS - ENTRY GATE
-
-
-
... More
Site cleaning, soil restoration and earthworks
-
-
-
... More
Uprooting rank vegetation and weeds by digging the area to a depth of 60 cm, removing all weeds and other growth with roots by forking repeatedly, breaking clods, rough dressing, flooding with water, uprooting fresh growths after 10 to 15 days and then fine dressing for planting new grass, including disposal of all rubbish with all leads and lifts.
101
-
-
... More
Good garden soil
-
-
-
... More
Supplying and stacking of good earth at site including royalty and carriage upto 5 km complete (earth measured in stacks will be reduced by 20% for payment).
51
-
-
... More
Rough dressing
-
-
-
... More
Rough dressing the trenched ground including breaking clods.
168
-
-
... More
Fine dressing
-
-
-
... More
Fine dressing of the ground.
168
-
-
... More
Mixing and spreading of good soil and mannure
-
-
-
... More
Spreading of sludge, dump manure and/or good earth in required thickness as per direction of officer-in-charge (cost of sludge, dump manure and/ or good earth to be paid separately).
51
-
-
... More
Cow dung manure
-
-
-
... More
Supplying and stacking of well decayed cattle manure at site including royalty and carriage upto 5 k.m. lead complete (cattle manure measured in stacks will reduced by 8% for Payment).
51
-
-
... More
Grassing
-
-
-
... More
Supplying & Stacking of Selection No.1 Grass at site fresh & free from weeds having proper roots in green including loading, unloading, carriage and all taxes paid etc.and as per direction of officer in charge.
95
-
-
... More
Shrubs, Hedges and groudcover plantation
-
-
-
... More
Preparation of beds for hedging and shrubbery by excavating 60 cm deep and trenching the excavated base to a further depth of 30 cm, refilling the excavated earth after breaking clods and mixing with sludge or manure in the ratio of 8:1 (8 parts of stacked volume of earth after reduction by 20% : one part of stacked volume of sludge or manure after reduction by 8%), flooding with water, filling with earth if necessary, watering and finally fine dressing, leveling etc. including stacking and disposal of materials declared unserviceable and surplus earth by spreading and leveling as directed, within a lead of 50 m, lift up to 1.5 m complete (cost of sludge, manure or extra earth to be paid for separately)
45
-
-
... More
Plantation of Trees, Shrubs, and Hedge at site i/c watering and removal of unserveiceable material’s as per direction of officer in charge (excluding cost of plant & water)
-
-
-
... More
Shrubs Plant
1184
-
-
... More
Supply and stacking of Shrubs/ Ground-cover species
-
-
-
... More
Providing and stacking of Ophiopogon, Green/Black full of leaves in 15 cm size of Earthen Pot / Plastic Pot & as per direction of the officer-in-charge.
1184
-
-
... More
Tree plantation
-
-
-
... More
Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any, with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for separately) :
-
-
-
... More
Holes 90 cm dia, and 90 cm deep
14
-
-
... More
Plantation of Trees, Shrubs, and Hedge at site i/c watering and removal of unserveiceable material’s as per direction of officer in charge (excluding cost of plant & water)
14
-
-
... More
Supply and stacking of Tree species
-
-
-
... More
roviding and stacking of Delonix regia (Gulmohar) of height 150-165 cm.
in big poly bags of size 25 cm as per direction of the officer-in-charge.v
6
-
-
... More
Providing and stacking of Bottle palm of ht. 270-300 cm bottom girth 40-50
cm well developed in big HDPE bags as per direction of the officer-in-charge
8
-
-
... More
PART-17 PLUMBING WORKS
-
-
-
... More
Note : 1. "Procurement of items with astehetic value and visibility shall be on prior approval of architect and project office/PMC for specific arae of application."
-
-
-
... More
SANITARY FIXTURES & CP FITTINGS
-
-
-
... More
Supply, Installing, testing and commissioning of PH toilet including water closet, flush valve for closet and necessary accessories all of approved make etc.,complete.
21
-
-
... More
Water Closet
-
-
-
... More
RIMLESS WALL HUNG WC WITH UF SOFT CLOSE SLIM SEAT COVER HINGES ACCESSORIES SET SIZE: 380X515X360 MM
-
-
-
... More
Dual Flush valve
-
-
-
... More
Concealed Frame : SINGLE PIECE SLIM CONCEALED CISTERN WITH 2.0/4.0 LPF FLOOR MOUNTING FRAME INSTALLATION KIT AND P-TYPE DRAIN PIPE CONNECTION SET FOR WALL HUNG WC (WITHOUT FLUSH CONTROL PLATE)
-
-
-
... More
Concealed flush tank
-
-
-
... More
Supply, Installing, testing and commissioning of PH toilet rectangular wall hung wash basin, 15mm dia Pillar cock with waste coupling, CP angle cock, 32mm dia CP bottle trap with extension pipe, grab bar, supporting bracket with necessary steel to support basin, 450mm long CP connection pipe and CP wall flanges all of approved make etc.,complete.
21
-
-
... More
Wash Basin
-
-
-
... More
WALL HUNG WITH FIXING ACCESSORIES SIZE: 560X415X200 MM
-
-
-
... More
Pillar cock
-
-
-
... More
Angle cock
-
-
-
... More
BOTTLE TRAP (WITH INTERNAL PARTITION) 32MM SIZE WITH 300MM & 190MM LONG WALL CONNECTION PIPES & WALL FLANGE
-
-
-
... More
Waste coupling 32MM HALF THREAD
-
-
-
... More
450mm long CP connection pipe for wash basin
-
-
-
... More
Grab bar :Grab Bar vertical swing
-
-
-
... More
Supply, Storing, Installing, testing and commissioning of White color wall mounted European water closet with concealed dual flush tank with necessary pan connecter, bend,checknut, angle cock, solid seat cover with polythene buffer and flap, CP flanges, flush panel etc.,(The item rate shall include all costs towards labour, tools, tackles & machineries, all leads & lifts, work related cleaning ) complete..
180
-
-
... More
RIMLESS WALL HUNG WC WITH UF SOFT CLOSE SLIM SEAT COVER HINGES ACCESSORIES SET SIZE: 380X515X360 MM
-
-
-
... More
Dual Flush valve
-
-
-
... More
Concealed Frame :SINGLE PIECE SLIM CONCEALED CISTERN WITH 2.0/4.0 LPF FLOOR MOUNTING FRAME INSTALLATION KIT AND P-TYPE DRAIN PIPE CONNECTION SET FOR WALL HUNG WC (WITHOUT FLUSH CONTROL PLATE)
-
-
-
... More
Concealed flush tank
-
-
-
... More
Supply, Storing , Installing, testing and commissioning of under counter wash basin, 15mm dia auto closing Pillar cock with waste coupling, 32mm dia CP bottle trap with extension pipe, supporting bracket with necessary steel to support basin 1 No.15mm CP angle valve with 450mm long CP connection pipe and CP wall flanges all of approved make etc.,(The item rate shall include all costs towards labour, tools, tackles & machineries, all leads & lifts, work related cleaning ) complete.
180
-
-
... More
UNDER COUNTER BASIN WITH FIXING ACCESSORIES SIZE: 605X430X200 MM SHAPE: OVAL
-
-
-
... More
Pillar cock
-
-
-
... More
ANGULAR STOP COCK WITH WALL FLANGE
-
-
-
... More
BOTTLE TRAP (WITH INTERNAL PARTITION) 32MM SIZE WITH 300MM & 190MM LONG WALL CONNECTION PIPES & WALL FLANGE
-
-
-
... More
Waste coupling 32MM HALF THREAD
-
-
-
... More
450mm long CP connection pipe for wash basin
-
-
-
... More
Aquisense sensor faucet for wash basin with base flange flow rate 1.3LPM
-
-
-
... More
Supplying, installing, testing and commissioning White Vitreous large flat back urinal with sensor flush valve supported by CI/GI bracket duly painted, including CP brass waste with dome type grating, CP cast brass bottle trap with extension piece, wall flanges, automatic flushing systems for urinal to ensure flushing only immediately after use, comprising of all plumbing, electronic and electrical items. , CP wall flange, infrared photo cells (Sensor), eyes electrically operated solenoid valve, step down transformer/equipment and any other item required to provide satisfactory functioning.
84
-
-
... More
URINAL WITHOUT SENSOR WITH FIXING ACCESSORIES SET SIZE:480X300X 740 MM
-
-
-
... More
SENSOR FLUSHING VALVE FOR URINAL WITH COMPLETE KIT & FLOW RESTRICTOR
1.5 LPF AT 3 BAR PRESSURE (BATTERY OPERATED) (SUITABLE FOR URINAL )
-
-
-
... More
Fixing & testing of curved shaped urinal partition with frosted glass including providing & fixing concealed CI bracket, cutting and making good.
84
-
-
... More
Supply, Storing, Installing, testing and commissioning of 15mm CP health faucet of approved make with necessary CP flexible hose 1000mm long nozzle,CP wall flange, CP angle cock etc., (The item rate shall include all costs towards labour, tools, tackles & machineries, all leads & lifts, work related cleaning )
201
-
-
... More
(HEALTH FAUCET) WITH 8MM DIA, 1.2 METER LONG FLEXIBLE TUBE, WALL HOOK & FLOW RESTRICTOR 3.8 LPM AT 3 BAR PRESSURE
-
-
-
... More
ANGULAR STOP COCK WITH WALL FLANGE
-
-
-
... More
Supply, Installing, testing and commissioning of 15 mm dia Two Way CP bib cocks (The item rate shall include all costs towards labour, tools, tackles & machineries, all leads & lifts, work related cleaning)complete.
201
-
-
... More
2 WAY BIB COCK WITH WALL FLANGE & FLOW RESTRICTOR 2.5 LPM AT 3 BAR PRESSURE
-
-
-
... More
Supply, Installing, testing and commissioning of 15 mm dia CP bib cocks (The item rate shall include all costs towards labour, tools, tackles & machineries, all leads & lifts, work related cleaning)complete.
82
-
-
... More
Supply, installation and fixing of stainless steel toilet paper holder with SS scres on the wall.
201
-
-
... More
TOILET ROLL HOLDER WITH STAINLESS STEEL FLAP
-
-
-
... More
Supply, Storing and fixing of ABS body Liquid soap dispenser with SS screws on the wall.
169
-
-
... More
SOAP DISPENCER AUTOMATIC CHROME/ BLACK
-
-
-
... More
Supply, Storing and fixing of Stainless steel body paper towel dispenser with SS screws on the wall.
160
-
-
... More
Supply and fixing of ABS body smart flow Hand Dryer with SS screws on the toilet wall.
160
-
-
... More
FLASH TOUCH-FREE INFRARED HAND DRYER
-
-
-
... More
Supply and fixing of Fragrance dispenser with SS screws on the toilet wall.
160
-
-
... More
FLASH TOUCH-FREE INFRARED HAND DRYER
-
-
-
... More
Supply, installation and fixing of Robe hook with zelos accessories &. brass screw complete as required.
201
-
-
... More
DOUBLE HOOK
-
-
-
... More
Supply, installation and fixing of TOWEL RING with zelos accessories &. brass screw complete as required.
160
-
-
... More
TOWEL RING ROUND WITH ROUND FLANGE
-
-
-
... More
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board 510x1040 mm bowl depth 250 mm
11
-
-
... More
Supply, installation and fixing testing and commissioning of Horizontal approved make electically operated storage water heater inner container made from copper or stainless steel including the remal instalation safety valve, vacuum relief valve, neon lamp, mounting brackets, angle valve, connection hose installing in position with coach screws or bolts, nuts, testing, commissioning, etc, complete.
-
-
-
... More
a) 25ltrs capacity (Kitchen counter)
5
-
-
... More
b) 50ltrs capacity (Dish wash)
1
-
-
... More
Supplying, installing, fixing, jointing, testing and commissioning of Stainless steel type Water cooler / Water disepenser (Capacity 25 LPH), Outlet of Hot, Cold, Warm.
24
-
-
... More
Supply, storing, insatlling, testing & commissioning of 15mm dia angle cock with Wall Flange…(Kitchen & water dispenser)
35
-
-
... More
Supply, Installing, testing and commissioning of 15m dia CP sink mixer , CP waste coupling, 32mm dia CP bottle trap with extension pipe, and CP wall flanges, all complete set of approved make. Flow restrictor(1.4LPM)
11
-
-
... More
INTERNAL SOIL AND WASTE WATER SYSTEM
-
-
-
... More
Supplying and fixing the following dia PVC (SWR) pipe with ISI mark confirming to IS 13952 :1992 - TYPE B for soil with relevant specials conforming to IS14735 including jointing with seal ring conforming to IS 5382 with leaving a gap about 10mm to allow thermal expansion fixing the pipes into valves with necessary wooden plug, screws, holding wherever necessary and making good of the dismantled portion with necesaary connections to sanitary fittings etc.,complete in all respects and as directed by the departmental officers.
-
-
-
... More
40mm dia
200
-
-
... More
50mm dia
550
-
-
... More
Supplying and fixing the following dia PVC (SWR) pipe with ISI mark confirming to IS 13952 :1992 - TYPE B for soil with relevant specials conforming to IS14735 including jointing with seal ring conforming to IS 5382 with leaving a gap about 10mm to allow thermal expansion fixing the pipes into valves with necessary wooden plug, screws, holding wherever necessary and making good of the dismantled portion with necesaary connections to sanitary fittings etc.,complete in all respects and as directed by the departmental officers.
-
-
-
... More
75mm dia
3270
-
-
... More
110mm dia
2160
-
-
... More
160mm dia
265
-
-
... More
200mm dia
40
-
-
... More
300mm dia
150
-
-
... More
Supplying and fixing in position PVC cowls of following dia of best approved quality conforming to BIS, etc., complete complying with standard specifications. (The PVC cowl should be got approved by the Executive Engineer before use on works).
-
-
-
... More
160mm dia
24
-
-
... More
110mm dia
21
-
-
... More
75mm dia
12
-
-
... More
Providing & fixing in position deep seal multiway PVC floor Trap and PVC extension piece of required length depth of following size to suit site conditions and multiple inlets, to suit site conditions with inlet sizes ranging from 40 mm to 75 mm. The bottom of the sump shall be dummied water tight. Wherever, sumps are shown to have water seal, the seal depth shall be minimum 40 mm. The sump shall be laid in cement concrete bed with 1:2:5 mix with 40 mm brick jelly bed all around and finished with cement mortar 1:3. Providing and fixing heavy class C.P. brass mosquito proof grating with frame of approved design including setting in floor with cement mortar to match with floor finish. ( Sample should be got approved )
416
-
-
... More
Supplying, fixing and testing 110 dia PVC 'P' trap for urinals with boss connection suitable as per piping detail with fixed in bed of cement concrete. etc., complete. Including necessary wall cutting/chasing and making good, wire meshing , replastering and finishing as required.
42
-
-
... More
Supply, fixing and testing of PVC Floor cleanout (150x150mm) . For removing Clogging, etc., complete.(The frame and grating shall be approved by Architects)
5
-
-
... More
Supply, fixing and testing of PVC Ceiling cleanout. For removing Clogging, etc., complete.(The frame and grating shall be approved by Architects)
-
-
-
... More
300 mm Dia
10
-
-
... More
200 mm Dia
10
-
-
... More
160 mm Dia
28
-
-
... More
110 mm Dia
150
-
-
... More
75 mm Dia
155
-
-
... More
Supply and fixing of SS cockroach trap grating (Square drain jali - 5 x 5) , complete as per specifications. (The item rate shall include all costs towards labour, tools, tackles & machineries, all leads & lifts, work related cleaning) complete
451
-
-
... More
Providing, Fixing, testing and commissioning of Grease Separator for Free Standing Installation - LipuJet-P-OD, Extension stage 1 NS 2 with Disposal pump
1
-
-
... More
Supply, installation, testing and commissioning of PVC Khurra with CI Grating - L type with necessary accessories to complete the work including threading, cutting and fixing in/on walls under ceiling, on terrace, etc.,. The quoted rate shall include for making necessary chasing, making bores in foundation, walls, slabs, etc., and making good the chased surfaces and bores in cement mortar.
-
-
-
... More
160 mm dia
24
-
-
... More
110 mm dia
3
-
-
... More
Supplying, fixing and testing 100mm dis CP floor grating for Podium & basement drain suitable as per piping detail with fixed in bed of cement concrete. etc., complete.
118
-
-
... More
Supplying and fixing Solo lift-2, C3 waste water transfer pumpset automatic control float, including tank, isolation valve NRV, control panel pumpset capable of discharging 1 LPS testing, commissioning, maintain the system for one year etc. complete. (To pump waste water to downtake pipe in PHE shaft (1 working + 1 standby) Interconnection ball valve & NRV including vendor scope
1
-
-
... More
Supply, Installing, testing and commissioning of approved make CPVC pipes as per ASTM D-2846 for grey water pumping from solo loft pumps to risers (SDR 11 grade) and pipe specials like Coupler, reducer, elbow, and brass male/ female threaded pipe specials , cutting the pipes, fixing the pipe specials using solvent cement solution supplied by the same manufacturer, making water tight joints, making holes in walls restoring the damaged portions to their original condition using required materials, providing suitable pipe clamps fixed to structural support, installing pipe work to perfect plumb, straight in horizontal, conducting hydraulic test to pipe work to a pressure of 7 Kg per Sq.cm, etc. complete and as directed by the site engineer. The rate should include noise insulation for all exposed pipes.
-
-
-
... More
40mm dia
55
-
-
... More
Drilling with core cutting machine in RCC beams, slabs floors up to 200mm thick for laying pipes and rendering the same in RCC 1:2:4, finishing the same to the satisfaction of the owner or his authorized representative etc., including nominal reinforcement wherever required, . The quoted rate shall also include for providing EPOXY based water proofing compound for sealing the joints around the pipes
-
-
-
... More
160mm Dia
778
-
-
... More
Supplying, fixing and testing of 300mm wide SS drain grating with removable S.S. Grating of 304 of suitable size with 25mm height.
Grating with hairline finishing.
Grating with 5mm thick for outside ring, 3mm thick for interior section.
Grating has to be slip-resistant for one side, Plain on the other.Minimum point load- 150 K.G. per square meter. Trench should be provided with RCC / Brick by civil scope of works, drain outlet at center or as per site with all side slopping towards drain outlet. After that drain outlet PVC "P" trap to be provided.
All Sheet/Pipe S.S. 304 Grade Pre-Polished Plastic Coated
30
-
-
... More
INTERNAL & EXTERNAL WATER SUPPLY
-
-
-
... More
Supplying, fixing, testing and commissioning of approved make chlorinated polyvinyl chloride (CPVC) pipes, fittings SDR 11 ASTM CTS, for the following dia, pipes having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fitting i/c fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes &fittings with one step CPVC solvent cement and cost of cutting chases and making good the same include testing of joints complete as per direction of Project Officer. Concealed work including cutting chases and making good the wall etc.(Internal DWS,FWS & HWS)
-
-
-
... More
20mm Dia
7450
-
-
... More
25mm Dia
500
-
-
... More
32mm Dia
730
-
-
... More
40mm Dia
25
-
-
... More
Supply, installation and testing of uPVC SCH 80 pipes conforming to ASTM D 1785 and fittings of ASTM D 2467 at 300 psi to 150 psi working pressure. The scope of work including, cutting, cleaning and fixing in/on walls under ceiling, under ground etc.,. The quoted rate shall include for making necessary chasing, making bores in foundation, walls, slabs, etc., and making good the chased surfaces and bores in cement mortar. as specified by the Consultant / Engineer-in-Charge at site inclusive of backfilling with excavated earth with proper compaction etc., ( For shaft & external)
-
-
-
... More
20mm Dia
250
-
-
... More
25mm Dia
218
-
-
... More
32mm Dia
255
-
-
... More
40mm Dia
340
-
-
... More
50mm Dia
710
-
-
... More
65mm Dia
275
-
-
... More
80mm Dia
305
-
-
... More
100mm Dia
250
-
-
... More
150mm Dia
100
-
-
... More
Brass Isolation Valve suitable for the copper pipe and should be of non lubricated 90 degree turn lever ball valve of reputed make, conneced in line with medical gas pipe line system by using suitable size brass valve adopter union, ferrule, nipple, rubber "O' ring, tapion lap and etc. All pipe line regulators shall be capable of controlling pipe line pressure and must compatible with the requirements specified in IS 12827-1989. All valves should be pneumatically tested for twice the working pressure for the gas line as per IS Code 12827 / 1989 & ISO 7396 / 1987 Sepecification.
-
-
-
... More
20mm Dia
471
-
-
... More
25mm Dia
46
-
-
... More
32mm Dia
34
-
-
... More
40mm Dia
14
-
-
... More
Supply ,Installing, testing and commissioning Air release valves confirming to IS standard 13039 with necessary flanges, nuts and bolts etc.,(The item rate shall include all costs towards labour, tools, tackles & machineries, all leads & lifts, work related cleaning.) complete.
-
-
-
... More
20mm Dia
40
-
-
... More
Supply, installation, testing and commissioning approved make CI Non -return valves conforming to IS: 778 with necessary companion flanges, neoprene gaskets(10Kg/sq.cm. pressure rating) nuts and bolts including all the accessories to complete the work as per the specifications. ( Sample should be got approved )
-
-
-
... More
25mm Dia
1
-
-
... More
50mm Dia
2
-
-
... More
65mm Dia
5
-
-
... More
80mm Dia
8
-
-
... More
100mm Dia
5
-
-
... More
150mm Dia
1
-
-
... More
Supply, installation, testing and commissioning approved make CI Y-type Strainer conforming to IS standard with necessary companion flanges, neoprene gaskets(10Kg/sq.cm. pressure rating) nuts and bolts including all the accessories to complete the work as per the specifications.
-
-
-
... More
50mm Dia
2
-
-
... More
65mm Dia
4
-
-
... More
80mm Dia
6
-
-
... More
100mm Dia
6
-
-
... More
Supply, fixing, testing and commissioning of CI body slim seal butterfly valves as per detailed specifications complete with vertical/horizontal liver operated unit with handle, companion flanges, gaskets, nuts and bolts etc., complete confirming to IS: 13095. The valve shall be suitable for a working pressure of 16.0 kg/sqcm.
-
-
-
... More
50mm Dia
23
-
-
... More
65mm Dia
12
-
-
... More
80mm Dia
11
-
-
... More
100mm Dia
21
-
-
... More
150mm dia
5
-
-
... More
Supplying, installing, testing and commissioning approved make Brass pressure reducing station including pressure reducing valve ,3 Nos Isolation valves, 2 Nos Pressure Gauges with union, flanges etc., complete.
-
-
-
... More
20mm Dia
2
-
-
... More
25mm Dia
3
-
-
... More
32mm Dia
7
-
-
... More
40mm Dia
2
-
-
... More
50mm Dia
1
-
-
... More
Supply ,Installing, testing and commissioning of PN 10 mechanical type float switch with an isolation valve complete confirming to IS standards, necessary flanges, nuts and bolts etc.,(The item rate shall include all costs towards labour, tools, tackles & machineries, all leads & lifts, work related cleaning.) complete.
-
-
-
... More
50mm Dia
2
-
-
... More
80mm Dia
8
-
-
... More
Supplying, installing and testing approved make Electromagnetic flow water meter with BMS compatibility including 3 Nos Ball valves for isolation and By pass with unions etc., complete.
-
-
-
... More
25mm Dia
7
-
-
... More
65mm Dia
1
-
-
... More
100mm Dia
1
-
-
... More
150mm Dia
1
-
-
... More
Fabrication & fixing of hot dip galvanized GI puddle flanges fabricated out of GI pipes and GI plates and duly hot dip galvanized after fabrication. The puddles of various diameter shall be as shown the OHT, rain water, domestic treated water, flush water, HVAC make up water storage, pump room dewatering,drawings
-
-
-
... More
400 mm dia
3
-
-
... More
300 mm dia
6
-
-
... More
150 mm dia
4
-
-
... More
100 mm dia
25
-
-
... More
80 mm dia
26
-
-
... More
65 mm dia
14
-
-
... More
50 mm dia
23
-
-
... More
25 mm dia
16
-
-
... More
Supplying, Installing & testing of MS ERW Pipe confirming IS 1239 with clamping support and enamel painting(Yellow color) confirming as per IS 6044 norms (Header line) - 1 1/2"
66
-
-
... More
Supplying, Installing & testing of MS ERW Pipe confirming IS 1239 with clamping support and enamel painting(Yellow color) confirming as per IS 6044 norms ( Tapped line) - 1 "
50
-
-
... More
Supplying, Installing & testing of 3 PC isolation fire proof ball valve with necessary fittings & accessories with ASME IS 17292
-
-
-
... More
1 1/2"
2
-
-
... More
Supplying, Installing & testing of 25mm fire proof solenoid ball valve with necessary fittings & accessories with ASTM A 216
5
-
-
... More
Supplying, Installing & testing of pressure gauge(0 to 4 kg) with necessary fittings & accessories
5
-
-
... More
Supplying, Installing & testing of gas leak detector with sensors control panel board, 3.5 core cables with necessary fittings & accessories
5
-
-
... More
Supplying, Installing & testing of diaphram gas meter(G-24) in the kitchen area with inlet out outlet necessary fittings & accessories
5
-
-
... More
Pressure Regulating Station - Regulator
5
-
-
... More
EXTERNAL DRAINAGE
-
-
-
... More
Supplying and fixing the following dia PVC (SWR) pipe with ISI mark confirming to IS 13952 :1992 - TYPE B for soil with relevant specials conforming to IS14735 including jointing with seal ring conforming to IS 5382 with leaving a gap about 10mm to allow thermal expansion fixing the pipes into valves with necessary wooden plug, screws, holding wherever necessary and making good of the dismantled portion with necesaary connections to sanitary fittings etc.,complete in all respects and as directed by the departmental officers. (Shaft)
-
-
-
... More
75mm dia
700
-
-
... More
110mm dia
896
-
-
... More
160mm dia
1302
-
-
... More
Supply and Delivery of DWC Structured Wall Polyethylene Piping Systems (Pipe with online / offline coupler and elastomeric sealing ring) with required specials non-smooth external annular corrugated and smooth internal surface (Double wall) (SN 8 Class) for non-pressure underground sewerage, drainage application generally as per IS-16098 (Part-2) type B. (External)
-
-
-
... More
200mm dia
30
-
-
... More
250mm dia
100
-
-
... More
300mm dia
50
-
-
... More
Supplying, fixing and testing PVC gully trap (Rate Should Includes Cover ) of size 300mm x 300mm with rebated top square bodies 150mm x 150mm, CI grating 100mm dia outlet set in 75mm thick PCC 1:4:8 bed, 115mm thick masonry chamber in CM 1:4, internal and external plastering 12mm thick in CM 1:6, supply and fixing 300mm x 300mm size CI frame and cover, (weight of frame and cover not less than 25 kgs.) jointing to drain in CM 1:1, excavating, refilling and ramming etc., complete. as directed by the depatmental officers
3
-
-
... More
Construction of inspection chamber (Rate Should Includes IC Cover )with 230mm thick best quality Table moulded bricks in CM 1:4 mixed with water proofing material over a bed of 150mm thick PCC 1:4:8, walls plastered smooth, both inside and outside with CM 1:3, including curing. Excavation in all types of soil, necessary wooden/steel form work, back filling of the chamber sides with the excavated soil, disposing of the surplus earth after back filling with initial lead of 30 meters. including ,lift, benching and channelling shall be finished smooth, in PCC 1:2:4 providing and fixing of 40 Ton SFRC manhole frame and cover ( Weight of frame and cover not less than 105 kgs) with Thermo plastic moulded steps as per specifications and drawings. Depth of chamber not exceeding 1200mm. Size: 600mm x 600mm (internal clear finished dimensions) as directed by the depatmental officers
-
-
-
... More
600 x 600 mm up to 600 mm deep
1
-
-
... More
900 x 800 mm up to 900 mm deep
2
-
-
... More
900 x 1200 mm up to 2500 mm deep
1
-
-
... More
Construction of catch basin(Rate should includes CB cover) with 230mm thick walls in well burnt table moulded bricks in CM 1:6 over a bed of 150mm thick PCC 1:4:8 internal walls shall be plastered smooth in CM 1:3 and external walls plastered CM 1:3 with sponge finish. Fixing CI frame and grating conforming to IS 5967 / 1970 The top surface of the catch basin grating shall be flushed to the landscape level and making suitable outlet arrangement to lateral drain with necessary excavation, back filling with the selected earth. with all leads and lifts etc., complete. Depth will vary.
-
-
-
... More
600 x 600 mm
5
-
-
... More
Supplying and laying of RCC Hume NP4 Class conforming to IS:458, with collars and jointing cement soaked Hessian cloth and finished smooth the joint with cement mortar 1:1, including Earth work excavation for the required depth with dewatering if required, laying pipe, providing and laying cement concrete 1:3:6, 75mm thick at the side of joints to the required line, level and slope and backfilling etc., complete (For Road Crossing)
-
-
-
... More
150 mm dia
500
-
-
... More
300 mm dia
200
-
-
... More
400 mm dia
150
-
-
... More
PUMP ACCESSORIES
-
-
-
... More
Supplying, installation, testing and commissioning of Booster pump for Domestic water supply with Horizontal multi stage pumps, Valves, Pressure vessels, control panel etc. The panel shall be compatible with BMS (MODBUS RS 485 / MSTP)
1
-
-
... More
Flow Rate: 3.5 LPS at 25 Mtr Head ( 1W + 1S)
-
-
-
... More
Supply, Installation, delivery, testing, commissioning of De-watering submersible pump made of Cast Iron Construction .Impeller shaft shall be S.S construction with mechanical seal suitable for building application. The unit shall include TEFC motor suitable for 415V,3Phase,50Hz & Insulation -Class F,IP 68 Protection and Base plates,Coupling,Nylon ropes for lifting pumps with Automatic ON/OFF Level Switch with common starter panel, each starter consists of suitable MPCB, Contactor, Overload relay, Single Phase Preventer, Push buttons, LED on indicators, all are in Weather Proof box (IP55) and necessary suitable copper cables from starter panel to pump (Appx.20Mtrs/each pump) etc. Pumps shall be IE-3 class rated. complete with necessary accessories. The panel shall have 2nos incomers with auto changeover switch. The panel shall be compatible with BMS (MODBUS RS 485 / MSTP) (For pump room)
-
-
-
... More
Drain water lifting pumps for PHE PUMP Room
1
-
-
... More
Each Pump capacity : 2 LPS
-
-
-
... More
No of Pumps : 1 working + 1 working
-
-
-
... More
Delivery head : 15 m
-
-
-
... More
Drain water lifting pumps for FIRE PUMP Room
1
-
-
... More
Each Pump capacity : 2 LPS
-
-
-
... More
No of Pumps : 1 working + 1 working
-
-
-
... More
Delivery head : 15 m
-
-
-
... More
Supply, Installation, delivery, testing, commissioning of De-watering submersible pump made of Cast Iron Construction .Impeller shaft shall be S.S construction with mechanical seal suitable for building application. The unit shall include TEFC motor suitable for 415V,3Phase,50Hz & Insulation -Class F,IP 68 Protection and Base plates,Coupling,Nylon ropes for lifting pumps with Automatic ON/OFF Level Switch with common starter panel, each starter consists of suitable MPCB, Contactor, Overload relay, Single Phase Preventer, Push buttons, LED on indicators, all are in Weather Proof box (IP55) and necessary suitable copper cables from starter panel to pump (Appx.20Mtrs/each pump) etc. Pumps shall be IE-3 class rated. complete with necessary accessories. The panel shall have 2nos incomers with auto changeover switch. The panel shall be compatible with BMS (MODBUS RS 485 / MSTP) (For Basement)
-
-
-
... More
Drain water lifting pump(1) for Basement
1
-
-
... More
Each Pump capacity : 25 cu.m/Hr
-
-
-
... More
No of Pumps : 1 working + 1 working
-
-
-
... More
Delivery head : 20-25 m
-
-
-
... More
Drain water lifting pump(2) for Basement
1
-
-
... More
Each Pump capacity : 25 cu.m/Hr
-
-
-
... More
No of Pumps : 1 working + 1 working
-
-
-
... More
Delivery head : 20-25 m
-
-
-
... More
Design, engineering, and providing all equipment's, installation and commissioning of equipment's/electrical panel /piping for Rain water pre treatment plant as description given in below:
1
-
-
... More
a. Filter Feed Pumps - Horizontal, centrifugal Pumps Self priming type complete with motor, base plate, coupling etc with wetted parts, in CI - 2 Nos. (1W+1S) complete with panel and accessories and shall have dry run protection and weather proof enclosure : 15000Lph @ 15-20m head
-
-
-
... More
b. Hypo Dosing system of electromechanical type pf capacity 0-4 Lph, dosing pump, storage tank of as per suitable capacity
-
-
-
... More
c. Dual media Filter with a filtration rate of 15000LPH, Filter media, Multiport valve and with necessary accessories
-
-
-
... More
Supply, delivery, testing, commissioning of Vertical Multi stage Centrifugal Pump with suitable capacity 415V, 3-phase,50Hz motor and coupling with base frame having discharge capacity of 10 Cum/Hr against total head of 25m from all causes, with common starter panel, each starter consists of suitable MPCB, Contactor, Overload relay, Single Phase Preventer, Push buttons, LED on indicators, all are in Weather Proof box (IP55) and necessary suitable copper cables from starter panel to pump (Appx.20Mtrs/each pump) etc. Pumps shall be IE-3 class rated. complete with necessary accessories. The panel shall have 2nos incomers with auto changeover switch. The panel shall be compatible with BMS (MODBUS RS 485 / MSTP) Scope included auto level controller and cable between sump and OHT.
-
-
-
... More
For Domestic water Lifting from sump to OHT
1
-
-
... More
Each Pump capacity : 6 LPS
-
-
-
... More
No of Pumps : 1 working + 1 working
-
-
-
... More
Delivery head : 80-85 m
-
-
-
... More
For Flush water Lifting from sump to OHT
1
-
-
... More
Each Pump capacity : 5 LPS
-
-
-
... More
No of Pumps : 1 working + 1 working
-
-
-
... More
Delivery head : 80-85 m
-
-
-
... More
For Makeup water Lifting from sump to OHT
1
-
-
... More
Each Pump capacity : 6 LPS
-
-
-
... More
No of Pumps : 1 working + 1 working
-
-
-
... More
Delivery head : 80-85 m
-
-
-
... More
OHT & UG SUMP Transfer Pumping System
-
-
-
... More
Automatic Level Control System for the OHTs and UG SUMP.
-
-
-
... More
Supply, Installation, Testing, Commissioning and handing over of automatic tank level controller comprising of the following:Level Control with Motorised valves comprising of following:
-
-
-
... More
Magnetic ball float type Level sensor for tank - High Level & Low level - 1 set.
Audco / Kitz / Belimo make valve actuator, suitable for the following ball / butterfly valve. The mechanism shall be of tight shut-off type. - 1 set.
Audco / Kitz / Saunders make butterfly / ball valve, with suitable adaptor for the above valve actutaor - 1 no. Wiring with 2C x 2.5 sqmm copper wires in 20-mm GI conduits interconnecting the level sensor and the valve actuator - Assume 20 RMT.
Power transformer, if necessary for supplying power to the valve actuator from field available power supply of 230V, 1Ph., 50hz, complete with powder coated, weather proof mounting box, incoming 5A MCB, etc., complete.- 1 set.
-
-
-
... More
For Domestic , Flush ,HVAC MAKEUP Water OHTs & UG SUMP:
-
-
-
... More
a) With 50mm butterfly valve
2
-
-
... More
b) With 80mm butterfly valve
8
-
-
... More
Supply, Installation, of Manhole cover 60 X 60 cm Heavy grade with frame (For UG sump & OHT)
34
-
-
... More
Supply, Installation, of PVC mould CI Steps for Sump
242
-
-
... More
Supplying and fabricating by welding / electroforging, and fixing in position MS structural steel 25mm thk grating work made up of flats and roads including all necessary fixtures, fasteners, all material and labour complete in all respects. The grating shall be hot dip galvanised to 610grams/sgm.
-
-
-
... More
a) 300mm wide
450
-
-
... More
PART-18 FIRE PROTECTION SYSTEM WORKS
-
-
-
... More
Supply, erection, testing and commissioning of Fire Fighting 4 Way Fire Brigade Inlet with necessary gun metal 63mm dia non return spring shutter arrangements, so that to control one way flow at the time of emergency water supply by fire and rescue service fire engine entry including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers
2
-
-
... More
Supply, erection, testing and commissioning of Fire Brigade Draw out with value box and neccessary fittings / supports complete as per standard specification.
1
-
-
... More
Supply and fixing of Fire fighting application oblique type Stainless steel Hydrant Valve of size 63mm dia with oblique type instantaneous coupling with rotating wheel to open and close the valve including MS flange of table “E”, bolts & nuts with washer as per IS 5290 at ring main around the building and wet riser inside the building including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary etc complete as per standard specification and as directed by the Departmental Officers.
97
-
-
... More
Supply, erection, testing and commissioning of Pressure Gauge with 0 to 14 kg. range of reputed make with necessary valve, milling thread MS coupling fixed at delivery pipe line in pump house to read the developing pressure including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers.
112
-
-
... More
Supply, and fixing in position of Fire Fighting Application Hose of 63mm dia of 15 meters length binded by copper wire with 63mm dia stainless steel male and female instantaneous fire fighting special coupling as per IS 901 as directed by the Departmental Officers. Near every hydrant points including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found necessary etc complete as per standard specification and as directed by the Departmental Officers.
194
-
-
... More
Supply, and fixing in position of Fire Fighting Application 63mm dia stainless steel short length Branch Pipe with hexagonal type spray nozzle of 15mm (or) 20mm jet bore. Near every hydrant points including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers.
97
-
-
... More
Supply of Fire Fighting Application MS Hose Box to keep two number of hoses and 1 No. of branch pipe with nozzle having proper glass window type double door with universe open key, painted inside white and outside Post Office Red. Near every hydrant point including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found necessary, etc., complete as per standard specification and as directed by the Departmental Officers.
97
-
-
... More
Supply, erection, testing and commissioning of following MS ‘C’ Class Heavy Duty Pipe as per IS 1239 part 1- 2004 including necessary fittings like MS flange of table ‘E’, elbows, reducers, gaskets, bolt, nuts with washers & joints as per standard method of arc welding, including one coat metal primer and two coat Post Office Red painting including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found necessary, etc., complete as per standard specification and as directed by the Departmental Officers.
-
-
-
... More
250 mm dia
20
-
-
... More
200 mm dia
30
-
-
... More
150 mm dia
1878
-
-
... More
100 mm dia
811
-
-
... More
80 mm dia
1936
-
-
... More
65 mm dia
1441
-
-
... More
50 mm dia
1348
-
-
... More
40 mm dia
1576
-
-
... More
32 mm dia
1281
-
-
... More
25 mm dia
10318
-
-
... More
300 mm dia
20
-
-
... More
Supply, erection, testing and commissioning of following GI ‘B’ Class Medium Duty Pipe as per IS 1239 Part1-2004 to withstand a developing pressure of 10 kg. / sq.cm including necessary fittings like flange of table ‘E’, elbows, reducers, gaskets, bolt, nuts with washers & joints as per standard method of arc welding, clamp ,support reamed including one coat metal primer and two coat Post Office Red painting including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found necessary, etc., complete as per standard specification and as directed by the Departmental Officers.
-
-
-
... More
150 mm dia
26
-
-
... More
100 mm dia
32
-
-
... More
80 mm dia
96
-
-
... More
65 mm dia
162
-
-
... More
50 mm dia
230
-
-
... More
25 mm dia
56
-
-
... More
Providing, fixing Pipe supports from columns / wall or suspenders from roof slab to suit various dia of pipes made out of GI / MS adjustable rods threaded for a sufficient length to adjust the height of support along with clamping arrangement for holding pipes of anchor fastening, arrangement design of hanger and should confirm with specification.
-
-
-
... More
100 mm dia
210
-
-
... More
80 mm dia
1018
-
-
... More
50 mm dia
424
-
-
... More
40 mm dia
3487
-
-
... More
150 mm dia
581
-
-
... More
DI Wafer type Butterfly Valve
Manufacturing, supply and delivery of resilient seated wafer type butterfly valve in accordance with EN 593, centric disk mounted in three maintenance-free bearing bushes, tight in both flow directions, Replaceable rubber sleeve with integrated seal for functionally reliable use for flared flanges, welding flanges, PE flanges as well as loose flanges with Vcollar, Stable seat due to collar with vulcanized support ring. Vaccum tight upto 1 Torr. Face to face length acc.to 558-1, basic series 20(DIN 3202/k1). With Electrostatic epoxy
powder coating (EP-P) inside and outside color blue RAL 5005 with minimum coatingthickness of 250 microns. The EPDM rubber & Epoxy Powder should be approved by W 270.(EP-P it is resi-coat powder approved for drinking water application, applied through fusion bonding technology process by dipping the shot-blasted casted components heated upto 200 deg C) and with 5 years warranty
-
-
-
... More
200 mm dia
1
-
-
... More
150 mm dia
62
-
-
... More
100 mm dia
24
-
-
... More
80 mm dia
40
-
-
... More
65 mm dia
12
-
-
... More
Supply, lnstallation, Testing and Commissioning of Tamper Switch for Butterfly valves of 150 mm dia, complete with all necessary accessories, as per specification/drawings and as directed by Engineer In Charge.
28
-
-
... More
Wrapping and Coating Anti-Corrosive Treatment for under ground MS pipe having one coat of anti-corrosive metal primer, one layer of asphalt tar tape wound over the MS pipe as per standard methods as per standard specification as directed by the Departmental Officers.
-
-
-
... More
80mmdia
12
-
-
... More
Supply and fixing Orifice plate made out of 6mmthick stainless steel grade 304 with orifice of required size to be fitted between flange and landing valve of external and internal hydrant to reduce pressure at the outlet to the level of 3,5 kg/cm2 complete as required
63
-
-
... More
Supply, installation of Fire Fighting Application 180 degree swinging type, Hose reel drum with 20mm dia braided thermoplastic hose of 30 meters long, so as to extend to necessary distance by self rolling spindle wheel including necessary 20mm dia ball valve and open and close spray nozzle, warm clip, etc., as per the standard pattern of any reputed make at every floor nearer to hydrant valve, including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found necessary., etc., complete as per standard specification and as directed by the Departmental Officers.
91
-
-
... More
Supply ,installation, testing and commissioning of 25mm diameter Forged Brass Air release valve PN-16 BODY - Forged brass 25 mm
7
-
-
... More
Supplying, installing, testing and commissioning of Gun metal chrome finished 25mm dia Ball valves with fittings of screwed end type.
7
-
-
... More
Supply and fixing nominal bore quartized bulb type Sprinkler bulb 68 Deg C fast response pendent type including GI collar for each sprinkler bulb, mounted in MS pipe line using suitable size MS threaded coupling, thread, shellac etc., as per standard methods and including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found necessary, etc., complete as per standard specification and as directed by the Departmental Officers. It shall have UL listed and FM approved.
1153
-
-
... More
Providing , fixing, testing and commissioning of 15 mm dia quadrized bulb type Sprinkler of rating 68 degree centgrigade with required accessories.It shall have UL listed and FM approved.
-
-
-
... More
Upright sprinkler
3440
-
-
... More
Providing , fixing, testing and commissioning of 15 mm dia quadrized bulb type sprinkler of rating 79 degree centgrigade with required accessories Upright sprinkler.It shall have UL listed and FM approved.
2015
-
-
... More
Providing , fixing, testing and commissioning of 15 mm dia quadrized bulb type sprinkler of rating 79 degree centgrigade with required accessories Side wall sprinkler.It shall have UL listed and FM approved.
151
-
-
... More
Supply, Installing, testing and commissioning of Stainless Steel Corrugated Flexible Braided Pipe (Hose) for dropping sprinklers below false ceiling. Pipe shall be 16 bar pressure rating and 1500mm long, 25mm dia with union / reducer, collar, clamps, etc. It shall have UL listed and FM approved.
1104
-
-
... More
Supplying and installing of approved type Rosette Plates (Recessed Type in Two Pieces) for sprinklers below false ceiling area. The Rosette shall be fabricated by MS plate of 2mm thick and the finish shall be powder coated and color, as directed by the Departmental Officers.
1104
-
-
... More
Providing and fixing flow switch in following size M.S pipe including connection ect as required
-
-
-
... More
150 mm dia
28
-
-
... More
25 NB gunmetal test and drain valve with sight glass
28
-
-
... More
Providing , fixing , testing ,commissioning valve of Installation control valve , cast iron body, working parts comprising water motor alarm, bronze seat clapper, clapper arm and hydraulically driven mechanical gong bell to sound continuous alarm when the wet raiser/sprinkler system activates, pressure gauges, emergency release, strainer, pressure switch, cock valve complete with drain valve and bypass test control box, ball valves, MS pipe of required size, flanges, orifice plate, gasket etc of following sizes as required.
-
-
-
... More
150 mm dia
2
-
-
... More
Supplying , installation , Testing & commissioning of deluge valve UL listed with wet pilot basic trim assembly for DVA with test and alarm drip and drain valve with water motor gong complete as required
-
-
-
... More
100 mm dia
2
-
-
... More
80 mm dia
2
-
-
... More
Providing installation, testing and commissioning of electric release trim assembly for deluge valve with two way solenoid valve, weather proof operation on 24 volts dc supply complete as required
4
-
-
... More
Providing installation, testing and commissioning of nozzle 15 mm dia nickel chrome plated brass, BSPT, Factor as Per design consideration complete as required ( Spray nozzle)
100
-
-
... More
Supply erection testing and commissioning of Electric Motor Driven Fire Pump set 1 No. horizontal split casing centrifugal type fire pump capable of delivering 2850 LPM against a total head of 120 metres Suitable HP, so as to ensure a minimum pressure of 3.5 kg. per sq.cm at the farthest top most hydrant / outlet with pump casing of cast iron to grade FG 200, IS 210-1978 and parts like impeller, shaft sleeve, bearing ring, etc., of non-corrosive metal either
like bronze, brass or gun metal and shaft of stainless steel.
2
-
-
... More
Supply, installation, testing and commissioning of Diesel Engine Driven Main Fire Pump suitable for automatic operation and consisting of followings complete in all respects as required. 1 No. horizontal split casing centrifugal type fire pump capable of delivering 2850 LPM against a total
head of 120 metres, so as to ensure a minimum pressure of 3.5 kg. per sq.cm at the farthest top most
hydrant / outlet with pump casing of cast iron to grade FG 200, IS 210-1978 and parts like impeller, shaft
sleeve, bearing ring, etc., of non-corrosive metal either like bronze, brass or gun metal and shaft of stainless
steel. Suitable HP, 2150 RPM water cooled with radiator,diesel engine conforming to relevant IS standard complete with auto starting mechanism, 12 /24 volts electric starting equipment, The Diesel Tank (fuel tank ) shall be of welded steel construction (3mm thick) and of capacity sufficient to allow the engine to run on full load for at least 8 hours., exhaust pipe extended upto 15 m outside pump house duly insulated with 50 mm thick glass wool with 1.0 mm thick aluminium sheet cladding, residential silencer, instruments and protection as per standard specification, stop solenoid for auto stop in the event of fault with audio indications, painted with post office red colour etc. as required. M.S fabricated, common base plate, coupling, coupling guard, foundation bolts etc. as required. Suitable cement concrete foundation duly plastered and with anti vibration pads
1
-
-
... More
Supply erection testing and commissioning of Electric Motor Driven Fire Pump set suitable for automatic operation and consisting of following: a. Supplying, installation, testing and commissioning of Electric driven Main Fire Pump suitable for automatic operation and consisting of following, complete in all respects, as required.
b.Horizontal split casing centrifugal type, multistage, pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal conforming IS 1520.
C. Suitable HP squirrel cage induction motor, TEFC, Synchronous speed 1500 RPM, suitable for operation on 415 volts, 3 phase 50 Hz, AC supply with IP 55 protection for enclosure, horizontal foot mounted type with Class-F insulation, conforming to IS-325.
d. M.S. fabricated common base plate, coupling, coupling guard, foundation bolts etc. as required.
e. Suitable cement concert foundation duly plastered within vibration pads.
-
-
-
... More
1620LPM / 88M HEAD
1
-
-
... More
180LPM / 88M HEAD
1
-
-
... More
Supply, erection, testing and commissioning Mono Block type Fire Fighting Pressurisation Pump of 180 LPM 120 metres head at 10 HP with suitable base frame including necessary vibration bad mounting etc., including conveying, fixing and incidental charges., etc., complete as per standard specification and as directed by the Departmental Officers.
2
-
-
... More
Supply, erection, testing and commissioning of fire fighting application monoblock motor pump set of 900 LPM at 40 meters head to develop 3.5 kg/sq.cm at the heightest and farthest hydrant point to make 30 m water jet at the time of fire fighting emergency circumstances, coupled with 11 KW /15 HP rated three phase 414 volts, 50 Hz, 2880 rpm electrical motor the pump with cast ron body, bronze impeller, rope gland packaging, suction size of 80 mm dia. delivery size of 65 mm dia., including the cost of foundation concrete anti vibration mounting, rain safety hood and etc. complete as directed by the Departmental Officers.
1
-
-
... More
Supply, erecting, testing and commissioning of Fire Fighting Electrical Control Panel of 15 HP, 415 V, 50 Hz Rating Wall Mounted Type fabricated using CRCA sheet, hinged lockable our, dust and vermin proof with following provisions:
a. 63 Amps, 4 Pole MCB - Incomer, 6 Amps, 2 Pole MCB for Control Circuit - 1 set
b. R, Y, B Phase Indication Lamp, Volt Meter (0 - 500 V),A meter (0 - 50 A), Volt Meter Selector Switch- 1 set
c. 32 Amps Power Contactor with 230 V Coil, 14 - 23 Amps Over Load Relay - 1 set
d. Single Phase Preventer - 1 No.
e. Indication Lamp for Motor ON / OFF / TRIP - 1 set
f. AUTO / MANUAL Selector Switch, ON / OFF Push Button - 1set
g. Add On Block, Terminal Block, Power Wiring, Control Wiring, Connectors, Cable Lugs, Slotted Cable Cover
The above panel mounted on wall using anchor fasteners bolts, plugs, incoming and outgoing cable connection and all works carried out as per standard methods and as directed by the Departmental Officers.
1
-
-
... More
Fire Fighting MCC Panel to control 3no's main electrical pumps & 3no's jockey pumps
Design, Supply, Installation, testing and commissioning of cubicle type floor mounting switch board comprising of the following, the board shall be fabricated as per the detailed specification enclosed.
The below mentioned ratings are indicative only however the contractor shall have to select the suitable rating breakers, switches, starters and related all the accessories based on the selected motors
Incoming
630A, 50KA, 4P MOT MCCB with all connected accessories - 2 Each. as incomer. Incomers & Bus coupler shall have electrically interlocked with auto manual selector switch
Instrument Panel
Digital type MFM with RS485 port - 1 No
Outgoing
200A TP&N 50kA THERMAL MAGNETIC MCCB with SOFT starter suitable for Electrical Driven Pumps with ON/OFF/TRIP indicating lamps, ON/OFF push buttons and all other required accessories - 3 Each 63A TP&N THERMAL MAGNETIC MCCB 50kA with SOFT starter suitable for Jockey pumps with ON/OFF/TRIP indicating lamps, ON/OFF push buttons and all other required accessories - 3 Each
With necessary Aluminum bus bars, interconnections, earthling etc., with required accessories as per the specifications.630 Amps TPN Aluminum bus bars:- All the neutral bus bars shall have the same capacity of phase bus bars Also potential free contacts shall be provided for connecting to the IBMS
1
-
-
... More
DIESEL ENGINE AUTO START PANEL
Supply installation testing and commissioning of Auto start panel for the diesel engine complete with auto/manual switch, relay, timers, contactors, rotary switches for AC ON / DC ON, indication lamps, protective fuses with battery charger, suitable of working on 230 V, AC, single phase, enclosure being vermin & dust proof, necessary alarms, different selector switches, push buttons etc. Also potential free contacts shall be provided for connecting to the IBMS.
Battery charger with transformer with rectifier resistance DC ammeter, DC voltmeter, Trickle / booster / off selector switch - 2 Each.
1
-
-
... More
Supply and laying of following sizes of Armored Aluminum / Copper Cables for electrical motor, control panel, pressure switch, jockey motor etc., all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found necessary, etc., complete
as per standard specification and as directed by the Departmental Officers.
-
-
-
... More
3 core 185 sq.mm. armored aluminum cable (Fire Survival)
100
-
-
... More
Supply and laying of 4 core 10 sq.mm. armored (Fire Survival) copper cable for power wiring to the Terrace Pump Motor with runs of 14 SWG TC wire for earthling, providing in wall with suitable size GI clamps, screws, wooden plug, end termination by using suitable size cable glands, copper sockets and etc., as directed by the Departmental Officers.
70
-
-
... More
Supply and laying of 2 core 1.5 sq.mm. armored FRLS copper cable for control wiring to the Terrace Pump Motor with runs of 14 SWG TC wire for earthling, providing in wall with suitable size GI clamps, screws, wooden plug, end termination by using suitable size cable glands, copper sockets and etc., as directed by the Departmental Officers.
2120
-
-
... More
Design, supply and laying of 50 x 10 mm GI. flat run along the cable tray
50
-
-
... More
Supply, erection of following sizes GI ladder type cable rack system made out of sheet steel folded to required shape with adequate number of supports. The rate shall be inclusive of suitable hanging support
-
-
-
... More
300mm x 75mm x 2.5mm
30
-
-
... More
Supply, erection of following sizes Perforated Vertical cable Tray with tray top cover to required shape with adequate number of supports. The rate shall be inclusive of suitable hanging support
-
-
-
... More
150mm x 75mm x 2.5mm
5
-
-
... More
Supply Electrical quality 6mm thick rubber mat
3
-
-
... More
Supply and Installation of Flexible PVC Insulated Stranded Copper Cable with Green / Yellow colored PVC insulation. Installation cost shall include crimping, bolting, termination, supply and installation of heavy-duty tinned copper lugs of suitable sizes on both sides.
-
-
-
... More
1C X 10 sq. mm. CU
40
-
-
... More
1C X 6 sq. mm. CU
40
-
-
... More
Supply, erection, testing and commissioning of following sizes of Heavy Duty Foot Valve including all accessories, such as, MS flange of table ‘E’, gaskets, bolts & nuts, etc., installed at end of 100mm dia suction pipe line at sump including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found necessary, etc., complete and as per standard specification and as directed by the Departmental Officers.
-
-
-
... More
100mm dia
2
-
-
... More
Supply, erection, testing and commissioning of cast iron body and bronze internal non-rising spindle sluice valve of sizes at required places to control the flow of water including necessary MS flange of table ‘E’, gaskets, bolts & nuts including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found necessary, etc., complete as per standard specification and as directed by the Departmental Officers.
-
-
-
... More
250 mm dia
2
-
-
... More
200 mm dia
3
-
-
... More
150 mm dia
1
-
-
... More
80 mm dia
3
-
-
... More
Supplying, fixing, testing & commissioning of double flanged sluice valve of rating PN 16 with non rising spindle, bronze/gunmetal seat, ISI marked complete with nuts, bolts, washers, gaskets and conforming to IS 780 of following sizes as required
-
-
-
... More
300 mm dia
4
-
-
... More
Supply, erection, testing and commissioning of Cast iron body and Gun metal or stainless steel internal Non-return valve of following sizes to control one way flow of water to be installed pump room at delivery line and near overhead tank at terrace level near to jockey pump and motor including necessary MS flange of table ‘E’, gaskets, bolts & nuts, etc. as per IS 5312 including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found necessary, etc., complete as per standard specification and as directed by the Departmental Officers.
-
-
-
... More
150 mm dia
6
-
-
... More
Manufacture, Supply and Delivery of DI D/F Slanted seat Swing Check Valve. Body of ductile cast iron of Grade GGG 40 or equivalent grade and disc of ductile cast iron GGG 40 or equivalent grade with fully encapsulated EPDM rubber, where both faces can be used. Electrostatic epoxy powder/liquid coating (EP-P) inside and outside color blue RAL 5005 with minimum coating thickness of 250 microns. The EPDM rubber & Epoxy Powder should be approved by W 270. (EP-P) it is a resi-coat powder approved for drinking water application, applied through fusion bonding process by dipping the shot-blasted casted components heated up to 200 deg C). Face to face dimensions as per EN558-1, series 48 and flange connections as per EN 1092-2/IS 1538 and with 5 years warranty
-
-
-
... More
250 mm dia
1
-
-
... More
65 mm dia
3
-
-
... More
Providing,installing, testing and commissioning of stainless steel Y strainer fabricated out of 1.6mm thick stainless steel , grade 304, sheet with 3mm dia holes with stainless steel flange
-
-
-
... More
150mm dia
1
-
-
... More
300 mm dia
2
-
-
... More
Supply, erection, testing and commissioning of suitable Pressure Switch of reputed make line Indfoss or Donfoss including necessary valves, couplings, etc., connected with electrical main control panel and setup at proper differential so as to auto start and auto stop the electrical motor, jockey motor including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., completed as per standard specification and as directed by the Departmental Officers.
14
-
-
... More
Supplying and fixing Air vessel made of 250 mm dia ,8 mm thick MS sheet ,1200 mm in height with Air release valve on top and flanged connection to raiser drain arrangement with 25mm dia gun metal wheel valve with rwquired acessorries, pressure gauge and painting with synthetic enamel paint of approved shade as required ,
5
-
-
... More
Supply and installation 150mm venture type Flow meter with (flow range 946 - 3785 LPM)
1
-
-
... More
Supply, installation, testing and commissioning of SS” stainless Expansion bellows (Flexible coupling) with required flanges,nuts,bolts & accessories
-
-
-
... More
200 mm dia
3
-
-
... More
150 mm dia
5
-
-
... More
80 mm dia
3
-
-
... More
65 mm dia
3
-
-
... More
Supply, Installation testing and commissioning Gun Metal 50mm Pressure relif valve
2
-
-
... More
Supply, Installation, of Manhole cover 60 X 60 cm Heavy grade with frame
2
-
-
... More
Supply, Installation, of PVC mould CI Steps for Sump
50
-
-
... More
Supply, Installation, of ANSI 150 G.I Puddle flange
-
-
-
... More
300mm Dia
2
-
-
... More
250mm Dia
2
-
-
... More
150mm Dia
6
-
-
... More
50mm Dia
3
-
-
... More
Supply, Installation, of 30 zone Annuniciation panel with required battery
1
-
-
... More
Supply, Installation, of Ultra sonic level indicator Range 0-10 Meter
3
-
-
... More
Supply and kept in position of 9 litres capacity Fire Buckets of 4 Each. with Bucket Stand as per standard specifications and as directed by the Departmental Officers
44
-
-
... More
Supply and kept in position of 4nos . Fire Buckets made out of 40 X 40 X 6mm MS Angle
11
-
-
... More
Supply and fixing of stored pressure ABC (Mono Ammonium Phospate) Powder Type Fire Extinguisher of 6 kg. capacity as per IS:15683 with pressure gauge, discharge hose & control nozzle, wall mounting bracket, safety clip etc., including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary etc, complete as per standard specification and as directed by the Departmental Officers.
147
-
-
... More
CO2 type Fire Extinguisher ISI marked confirming to IS:15683 latest. Capacity 4.5 Kg. Complete with delivery hose horn, squeeze grip release valve, locking arrangement,operating temperature -30°C to +55°C, supplied with body bearing IS 7285 mark and approved by CCoE tested at 250 kgf/cm2., fitted with ISI marked & CCoE approved valve as per IS 3224. CO2 Gas as per IS: 15222. externally painted with PO Red Shade No. 538 of IS 5, operation manual and floor stand or Wall Mount Bracket including accessories as required as per site condition
55
-
-
... More
FE36 Automatic ceiling Mounted Clean agent Extinguisher - 5 Kg with Ceiling mount accessories including nozzle(57 deg), pressure guage. ISI approved
5
-
-
... More
Supply and kept in position of Trolley Mounted Type 22.5 kg. Carbon-di-Oxide Fire Extinguisher as per IS15683, complete with control valve, gun metal cap, pressure gauge, operation sticker, discharge hose, mounting trolley with moving wheel, safety clip, etc., including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers.
2
-
-
... More
Supply and fixing of Water CO2 Stored Pressure Type 9 litres capacity Fire Extinguisher as per new IS 15683 complete with control valve, gun metal cap, pressure gauge, operation sticker, discharge hose, wall mounting bracket, safety clip, etc., as directed by the Departmental Officers.
28
-
-
... More
Mechanical Foam type fire extinguisher 9lts. Capacity type,High pressure ISI marked IS4947 CO2 gas catridge 120gms , Fire Rating:4A 34B, Service pressure: 19bar max, Bulk Discharge Range:2Rmt min,Charge:Water with AFFF 6%, complete ISI Marked Construction confirming to IS:15683
3
-
-
... More
Supply ,Fabrication and installation of MS stuctural support (Angle,channel,base plate etc) with one coat of primer and two coats of approved shade enamel paint.
500
-
-
... More
Obtaining Approval of Total Fire Protection system from local fire authority / Tamil nadu Fire & Rescue Service with all other charges and documentations for getting Final No Objection Certificate.
1
-
-
... More
PART-19 STRUCTURAL EARTHING & LIGHTNING PROTECTION
-
-
-
... More
NOTES
1.The Inprinciple approval from all Government authorities such as CEIG, TNEB etc shall be in Contractors scope.
2.Contarctor to coordinate, support Electrical contarctor for all required Government / CEIG / TNEB approvals for all pre construction as well as post construction approval.
3.The rate shall include all necessary Government authority approvals, drawing approvals, design calculations, installation, testing and commissioning from the statutory authorities such as CEIG,TNEB etc. Safety Certificate as required shall be obtained by the vendor at no additional cost.
4.Complete site coordination like interaction with all stakeholder's such as PMC, Electrical contarctor, Or other contractors shall be included in the scope to ensure smooth execution. Stage wise test results as per the standards shall be submitted as a report during final Handover.
5.The successful contractor to submit the detail method statement.
6.Earthing and Lightning Protection conforming to IS 732 , IS 3043,NBC - 2016 ,IS / IEC 62305 - 3
7.Contractor shall execute this work with specialised agencies as mentioned in approved make list only.
-
-
-
... More
Foundation Earthing- Mesh
-
-
-
... More
Supply and Installation of Rust resistant non corossive 10 mm dia Copper bonded round conductor used for Earth termination inside the concrete and soil. Test parameter: Short circuit current test for copper bonded conductor:Test 6 kA ratings, as per cross sectional area for 1 sec(IS3043/IEEE80); Electrical Resistivity before & after salt mist spray test: 0.25µΩm max. Tensile Test 290 to 510 N/mm². Adhesion no peel or crack & Bend test no seperation of Cu, Cu Coating thickness min. 70µm. Tested as per IEC 62561-2.
945
-
-
... More
Installation of Exothermic Welding - Including welding mould and other accessories for welding confirms the requirements of IEEE 837:2014 : T-Joint X- Joint, L -Joint, Straight joint.
103
-
-
... More
Supply and installation of Corrosion Bitumen tape for inside soil.
5
-
-
... More
Structural Down Conductors - Raiser
-
-
-
... More
Supply and Installation of Rust resistant non corossive 10 mm dia Copper bonded round conductor used for Earth termination inside the concrete and soil (Integrated down conductor). Test parameter: Short circuit current test for copper bonded conductor:Test 6 kA ratings, as per cross sectional area for 1 sec(IS3043/IEEE80); Electrical Resistivity before & after salt mist spray test: 0.25µΩm max. Tensile Test 290 to 510 N/mm². Adhesion no peel or crack & Bend test no seperation of Cu, Cu Coating thickness min. 70µm. Tested as per IEC 62561-2.
1496
-
-
... More
Supply and Installation of stainless steel Straight Connector at every 5Mtr of integrated down conductor and should be tested for electrical resistivity, mechanical load to meet the requirement for IS/IEC - 62305 and IEC 62561-1&2.
315
-
-
... More
Supply and Installation of Bonding clamp for interconnecting Round Conductor with reinforcement rebar at every 3.5Mtr inside the concrete to meet the requirements of IS/IEC 62305.
420
-
-
... More
Supply and Installation of Earthing stud & suitable Clamp of dimension 70 x 70 mm used in structural steel ring earthing system to meet the requirements of IS/IEC 62305. (For interconnecting Air termination and structral down conductors)
27
-
-
... More
External Lightning Protection System -Air Termination System and Inter-Connection
-
-
-
... More
Supply and Installation of 8mm dia Aluminum alloy Solid Round Conductor of material AlMgSi used in air termination and down conductor system . Cross sectional area of conductor should be 50 mm².
Test Parameter:
a.Lightning impulse current of 100kA for 10/350 µs
b.Electrical resistivity - 0.036 µΩm, Tensile strength - 120 to 240 MPa or N/mm², Salt spray - No Sign of Corrosion. Tested as per IEC 62561-2.
578
-
-
... More
Supply and Installation of UV resistance Nylon/PU Conductor Holder for Parapet wall for holding 8 mm dia Aluminium alloy round Conductor.
473
-
-
... More
Supply and Installation of UV resistance Nylon/PU roof conductor holder for flat roof with concrete block for fixing 8 mm dia Aluminium alloy Solid Round Conductor in the terrace flat surface at every 1 mtr.
105
-
-
... More
Supply and Installation of Stainless Steel Metal roof holder as per sheet profile for 8-10 mm dia Aluminium alloy Solid Round Conductor for horizontal Air terminal above metal sheet to meet the requirements for IS/IEC 62305.
Test Parameter:
Salt Spray Test ( IEC 62561-1) - No sign of Corrosion
5
-
-
... More
Supply and Installation of Stainless steel Cross Connector for 8 mm dia Aluminium alloy round conductor at cross junction.
Test Parameter
Salt Spray Test ( IEC 62561-1) - No sign of Corrosion
79
-
-
... More
Supply and Installation of Expansion Piece with connector to compensate the expansion and contraction of Solid Round Al. Conductor during temperature variations.Expansion piece should be consider at every 20 mtr length of straight horizontal air termination and connected at both the end with use of straight connector conductor . Test Parameter:
Electrical Resistivity Test-0.036 µΩm
Salt Spray Test - No Sign of Corrosion Tested as per IEC 62561-1
29
-
-
... More
Supply and Installation of Aluminium Straight conductor connector for interconnecting 8mm Aluminium conductor to meets the requirement of IS/IEC 62305.Tested for Electrical , Mechanical and chemical as per IEC 62561.
19
-
-
... More
Supply and Installation of air termination rod of 4mtr length of material AlMgSi of diametre ø 16/10 mm crimped on both the ends(Tappered Type). The rod shall be mounted with stainless steel clamp and fixing accessories . Test Parameter:
Mechanical Load Test for individual aluminium alloy rods - 120 to 280 N/mm²
Salt Spray Test-No sign of corrosion
Tested as per IEC 62561-1&2
17
-
-
... More
Supply and Installation of air termination rod of 6 mtr length of material AlMgSi of diametre ø 40/16/10 mm crimped on both the ends(Tappered Type). The rod shall be mounted with stone and fixing accessories . Test Parameter:
Mechanical Load Test for individual aluminium alloy rods - 120 to 280 N/mm²
Salt Spray Test-No sign of corrosion
Tested as per IEC 62561-1&2
4
-
-
... More
Supply and Installation of SS Foldinng clamp to meet the requirement of IS/IEC - 62305
5
-
-
... More
Supply and Installation of Earthing stud & suitable Clamp of dimension 70 x 70 mm used in structural steel ring earthing system to meet the requirements of IS/IEC 62305. (for interconnecting Air termination and structural down conductors)
29
-
-
... More
Supply and Installation of connecting point for Earth stud with to meet the requirements of IS/IEC 62305.
29
-
-
... More
Supply and Installation of Bridging cable with suitable connector to connect ACP/facade with the aluminium conductor to meet the requirement of IS/IEC 62305. Tested for Electrical, Mechanical and Chemical as per IEC 62561.
29
-
-
... More
TN-S PME Earthing System
-
-
-
... More
Supply and Installation of Rust resistant non corossive 10 mm dia Copper bonded round conductor used for Earth termination inside the concrete and soil (Integrated down conductor). Test parameter: Short circuit current test for copper bonded conductor:Test 6 kA ratings, as per cross sectional area for 1 sec(IS3043/IEEE80); Electrical Resistivity before & after salt mist spray test: 0.25µΩm max. Tensile Test 290 to 510 N/mm². Adhesion no peel or crack & Bend test no seperation of Cu, Cu Coating thickness min. 70µm. Tested as per IEC 62561-2.
462
-
-
... More
Supply and Installation of 10mm stainless steel Straight Connector at every 5Mtr of integrated down conductor and should be tested for electrical resistivity and mechanical load to meet the requirement for IS/IEC - 62305 and IEC 62561-1&2.
95
-
-
... More
Supply and Installation of 18 mm copper bonded Solid Steel Round Conductor with minimum coating thickness 70µm as integrated down conductor. Material should be tested Tensile strength, Electrical Resistance, salt mist, Bend & Adhesion to meet the requirements of IS/ IEC 62305 and IEC 62561-1&2.
745
-
-
... More
Supply and Installation of Diagonal clamp for interconnecting Round Conductor with reinforcement rebar at every 3Mtr inside the concrete to meet the requirements of IS/IEC 62305.
163
-
-
... More
Supply and Installation of Bonding clamp for interconnecting Round Conductor with reinforcement rebar at every 3Mtr inside the concrete to meet the requirements of IS/IEC 62305.
252
-
-
... More
Supply and Installation of 18mm stainless steel Straight Connector at every 5 Mtr of integrated down conductor and should be tested for electrical resistivity, mechanical load to meet the requirement for IS/IEC - 62305 and IEC 62561-1&2.
137
-
-
... More
Supply and Installation of suitable MS cross connector for 10 mm round conductor inside concrete and should be tested for electrical resistivity and mechanical load to meet the requirement of IS/IEC - 62305 and IEC 62561-1&2.
21
-
-
... More
Supply and Installation of suitable MS cross connector for 18 mm round conductor inside concrete and should be tested for electrical resistivity and mechanical load to meet the requirement of IS/IEC - 62305 and IEC 62561-1&2.
79
-
-
... More
Supply and Installation of Earthing stud with fixing clamp accessories of dimension 70 x 70 mm used in structural steel ring earthing system to meet the requirements of IS/IEC 62305. Rated Current (CPRI TESTED):
Irms- 5 KA; Ipeak- 10.5 KA Per sec
38
-
-
... More
Supply and Installation of Earthing stud with fixing clamp accessories of dimension 100 x 70 mm used in structural steel ring earthing system to meet the requirements of IS/IEC 62305.
Rated Current (CPRI TESTED): Irms- 8 KA; Ipeak- 17 KA Per sec
50
-
-
... More
Supply and Installation of SS Earthing stud with fixing clamp accessories of dimension 150 x 75 mm used in structural steel ring earthing system to meet the requirements of IS/IEC 62305.
Rated Current (CPRI TESTED): Irms- 9 KA per sec; Ipeak- 21 KA per sec
15
-
-
... More
Supply and Installation of Cu Earthing stud with fixing clamp accessories of dimension 100 x 70 mm used in structural steel ring earthing system to meet the requirements of IS/IEC 62305.
Rated Current (CPRI TESTED): Irms- 28 KA per sec; Ipeak- 75 KA per sec
20
-
-
... More
Supply and Installation of Cu Earthing stud with fixing clamp accessories of dimension 150 x 75 mm used in structural steel ring earthing system to meet the requirements of IS/IEC 62305.
Rated Current (CPRI TESTED): Irms- 41 KA per sec; Ipeak- 102 KA per sec
12
-
-
... More
Obtaining all required statutory preconstruction approvals from Government authorities such as CEIG,TNEB etc coordinating with electrical contractors to obtain post construction approval to put the system operational. The job involves but not limited to submission of application, making necessary application payment, test report , drawings & other relevant documents to authority and follow-up for approval.
1
-
-
... More
Supply and Installation of Heavy Duty Rigid FRLS PVC 1.8mm thick 20mm Dia Conduit with ISI Marking
1584
-
-
... More
Supply and Installation of 4 Way PVC Junction box
264
-
-
... More
Supply and Installation of 2 Way PVC Junction box
132
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements