Southern Railway Tender

Suspension Bearing Oil/turbine Oil For Rolling Stock Applications Conforming To Is 1012-1993 (re-affirmed 1998) For The Brands / Grades Of Procucts Approved By Rdso. Suspension Bearing Oil/turbine Oil: (plain /bush Type) Servo Prime-76 (ioc) Turbinol-77 (hpc) Mak Turbol-78 (bpc) Balmerol Protomac T 76 (bl & Co.) And Other Rdso Approved Brands.

Description :gasket For Sand Flow Chamber As Per Drawing No 3 Tacma 90, Item No 7. Material - Nitrile Rubber As Per Irs. Note: supply By Sources As Per Clw Item Id: 2100556 And 2101221 And 2100617 In Ireps Vendor Directory. [ Warranty Period: 30 months After The Date Of Delivery ] ]

Supply, Installation, Testing And Commissioning Of Heavy Duty Turning Lathe

Flat Split Cotter Pin Of Size 6.5mm Thic

Repair/reconditioning Of Flexi Coil Bogies Without Bolster Of Wap-4 Locomotives.at Dsl Ed.

Ms Shim For Damper Bracket As Per Drg

Set Of Spares For Rotomag Make Mcpa. Set Consists Of Four Items. 1) 4-670-bh-10x18-961, Qty - 01 No/set,2) 4-671-bh-10x18-962, Qty -01 No/set, 3) 4-598-rr-v-857, Qty - 01 No/set, 4) 4- 72-br-e43-103, Qty- 02 Nos/set.

Lipped Inner Race To Step Bearing Size:rb 5043 (nbc) To Nei Drg.no.x-119

Set Of Items For Control Cylinder O Ring Consists Of 2 Items As Given Below: 1) Packing Ring As Per Repl Part No : A4430.4 And Drg No: Am-404742-p1 - 1 No/set , 2) Damping Gasket As Per Repl Part No : A4430.2 And Drawing No : Ag-413762-p25 - 1 No/set. Make: River Engineering (or) Involute Only. Note: This Item Is Reserved For Supply By Source In Ireps Vendor Directory Only As Per Clw Item Id: 2101154

Hex Head Bolt Size: M16 X 50mm, Full Thr

Wire Rope Sling 06mm Dia 80cm Long To Is

H H Bolt Fully Threaded M8*20 Grade 8.8

Set Of Felt Packing To Support Rod Cylin

Overhauling Kit For Trc 1000mn Ug Compressor, To M/s. Elgi Part No. 072404009

Set Of 'o' Rings Kit For Auto Isolating Valve

Pinion Retaining Plate Suitable For Hita

Set Of Hardware's Consisting Of Following Items Hex Head Fully Threaded Bolt 8.8 Grades With Suitable Nut [ Is 1364/92], Suitable Flat Washer [is 5369/75] And Suitable Spring Washer [ Is 3064/94] Make : Tvs/gkw/pfl/lps/unbrako/vif/dfl For Nuts & Bolts , Flat Washers And Spring Washers Make Bbbb Or Equivalent. 1) M4 X 35 Mm Bolt (nut 01 No, Flat Washers 02 Nos, Spring Washer 01 No) - 300 Nos. 2) M5 X 55 Mm Bolt (nut 01 No, Flat Washers 02 Nos, Spring Washer 01 No) - 500 Nos. 3) M5 X 75 Mm Bolt (nut 01 No, Flat Washers 02 Nos, Spring Washer 01 No) - 500 Nos. 4) M6 X 55 Mm Bolt (nut 02 Nos, Flat Washers 02 Nos, Spring Washer 01 No) - 1800 Nos. 5) M6 X 45 Mm Bolt (nut 01 No, Flat Washers 02 Nos, Spring Washer 01 No) - 1500 Nos. 6) M6 X 30 Mm Bolt (nut 01 No, Flat Washers 01 No, Spring Washer 01 No) - 250 Nos. 7) M6 X 20 Mm Bolt (nut 01 No, Flat Washers 01 No, Spring Washer 01 No) - 250 Nos. 8) M8 X 50 Mm Bolt (nut 01 No, Flat Washers 02 Nos, Spring Washer 01 No) - 500 Nos. 9) M8 X 25 Mm Bolt (nut 01 No, Flat Washers 01 No, Spring Washer 01 No) - 2000 Nos. 10) M10 X 55 Mm Bolt (nut 01 No, Flat Washers 02 Nos, Spring Washer 01 No) - 1000 Nos. 11) M12 X 140 Mm Bolt (nut 01 No, Flat Washers 02 Nos, Spring Washer 01 No) - 200 Nos. 12) M14 X 75 Mm Bolt (nut 02 Nos, Flat Washers 02 Nos, Spring Washer 01 No) - 300 Nos. 13) M14 X 125 Mm Bolt (nut 03 Nos, Flat Washers 06 Nos, Spring Washer 03 Nos) - 500 Nos.

O/h Kit For Support Rod Assembly Of Ir03h Pantograph Each Set Consisting Of 09 Items (10 Nos). (1) Support Rod Contransys Pt. No-c0h1580 = 1 No. (2) Pin For Support Rod, Contransys Pt. No- c0h1590=1 No. (3) Insulating Washer, Contransys Pt. No- C015650= 02 Nos. (4) Spring, contransys Pt. No- C0h15660 = 1 No.(5) End Cap Bush Contransys Pt. No-c015670=1 No. (6) maintaining Washer, Contransys Pt. No-c015680= 1 No. (7) Maintaining Washer, Contransys Pt. no- C015690=1 No. (8) Circlip B-26,contransys Pt. No-c0156100=1 No. (9) Circlip B-15, contransys Pt. No-c0156110 = 1 No.

Bull Dog Clamp To Size 10mm To Is: 2361

L Clamp To Bogie For Tmdds As Per Drg.no