Southern Railway Tender

Supply and provision of mass concrete for platforms or elsewhere with 1:3:6 ratio using 20 mm blue metal complete in a manner as directed by the Section Engineer in charge at site.

Supply and fixing of Cable encasing pipe of 'B' class GI pipes 50mm Dia including one number of clamp made out of MS flat of 40mm x 6mm size, one per meter length of pipe and cable sealing compound units open end where ever required as directed by Engineer in charge at site.

Labour Charges for Laying of 50 mm Dia PE 80,PN 6 type HDPE pipes in the excavated 6 trench, on walls or on platform shelter etc., including suitable fixing arrangement complete in a manner as directed by Section Engineer-in-charge at site. (Note: Required HDPE Pipe will be supplied by Railways.)

Supply and laying of 6 SWG GI wire along with the LTUG Cable, for earth continuity confirming to IS 12776 complete in an approved manner and as directed by Engineer in charge at site.

Supply and fixing of cable route indicator made of cast iron plate type as per specification in drawing No. CEE/CN/MS/11-2004 complete in an approved manner and as directed by Engineer in charge at site.

Labour charges for Laying, testing and commissioning of LTUG power cables of size 9 upto and including 50 sq.mm in the excavated trench/on Building walls/Sheds/Shelters etc., as per IS No:1255 complete in an approved manner and as directed by Engineer in charge at site. Note: Required LTUG Cables only will be supplied by Railways.

Fabrication, Supply and fixing of Cable fixing clamps of suitable sizes made out of MS flat of 40mm x 6mm size including painting suitable for clamping/fixing of LTUG cables on the walls/ building/ sheds/ shelters etc., using bolts and nuts as desired by Section Engineer-in-charge at site.

Supply and concealing of rigid PVC conduits of 20 mm Dia confirming to IS 11 9537/P3/1983 or latest (ISI marked) with wall thickness not less than 2.0mm along with the all accessories like bend,junction box etc and including cutting the wall/ceiling/chipping and re plastering the same as good condition as directed by Engineer in charge at site.

Supply and concealing of rigid PVC conduits of 25 mm Dia confirming to IS 12 9537/P3/1983 or latest (ISI marked) with wall thickness not less than 2.0mm along with the all accessories like bend,junction box etc and including cutting the wall/ceiling/chipping and re plastering the same as good condition as directed by Engineer in charge at site.

Supply and fixing of PVC conduits (IVORY colour) of 20mm Dia confirming to 13 IS:9537/P3/1983 or latest(ISI Marked) with wall thickness not less than 2.0 mm, all accessories like bend,junction box etc on existing wall/stanchion/portal/column and clamped at regular intervals as directed by Engineer in charge at site.

Supply and fixing of PVC conduits (IVORY colour) of 25mm Dia confirming to 14 IS:9537/P3/1983 or latest(ISI Marked) with wall thickness not less than 2.0 mm, all accessories like bend,junction box etc on existing wall/stanchion/portal/column and clamped at regular intervals as directed by Engineer in charge at site.

Supply and wiring (single phase) including termination by 3 nos. of 6 sqmm PVC 15 insulated FRLS type flexible copper cable conforming to IS. No: 694, 1100 V grade through PVC conduit already fixed by concealed/open manner. Color coding shall be followed as directed by Engineer in charge at site(3 nos. of 6 sqmm copper cable wire shall be taken as 1 Mtr for measurement purpose).

Supply and wiring (single phase) including termination by 3 nos. of 4 sqmm PVC 16 insulated FRLS type flexible copper cable conforming to IS. No: 694, 1100 V grade through PVC conduit already fixed by concealed/open manner. Color coding shall be followed as directed by Engineer in charge at site(3 nos. of 4 sqmm copper cable wire shall be taken as 1 Mtr for measurement purpose).

Supply and wiring (single phase) including termination by 3 nos. of 2.5 sqmm PVC 17 insulated FRLS type flexible copper cable conforming to IS. No: 694, 1100 V grade through PVC conduit already fixed by concealed/open manner. Color coding shall be followed as directed by Engineer in charge at site(2 nos. of 2.5 sqmm copper cable wire shall be taken as 1 Mtr for measurement purpose).

Supply and wiring including termination for lights, fans and calling bell points etc. by 3 18 nos. of 1.5 sqmm PVC insulated fire retardant low smoke (FRLS) flexible copper cable, conforming to IS. No: 694, 1100 V grade, through existing PVC pipes already laid including, three plate ceiling rose and other accessories. Color coding shall be followed as directed by Engineer in charge at site.(Up to 3 m long points).

Supply and wiring including termination for lights, fans and calling bell points etc. by 3 nos. of 1.5 sqmm PVC insulated fire retardant low smoke (FRLS) flexible copper cable, conforming to IS. No: 694, 1100 V grade, through existing PVC pipes already laid including, three plate ceiling rose and other accessories. Color coding shall be followed as directed by Engineer in charge at site.(Above 3 m and up to and including 7 m long points).

Supply and wiring including termination for lights, fans and calling bell points etc. by 3 20 nos. of 1.5 sqmm PVC insulated fire retardant low smoke (FRLS) flexible copper cable, conforming to IS. No: 694, 1100 V grade, through existing PVC pipes already laid including, three plate ceiling rose and other accessories. Color coding shall be followed as directed by Engineer in charge at site (Above 7 m long points).

Supply at site, fixing, testing and commissioning of 12 way modular switch box with concealed metallic flush box as base, mounting plate (modular white plate) confirming to latest IS specification complete in an approved manner. The boxes are to be fixed firmly after doing the 21 following works at the location where the boxes are to be fixed: (1) Required opening for fixing the modular metallic switch box to be made by cutting the wall without causing major damage to wall (2) Unwanted projections are to be chipped and the wall surface is to be made even, (3) The wall surface is to be plastered to the present level of the wall surrounding the board. (4) The gap between box and wall surface to be filled with suitable filling material.

Supply at site, fixing, testing and commissioning of 08 way modular switch box with concealed metallic flush box as base, mounting plate (modular white plate) confirming to latest IS specification complete in an approved manner. The boxes are to be fixed firmly after doing the 22 following works at the location where the boxes are to be fixed: (1) Required opening for fixing the modular metallic switch box to be made by cutting the wall without causing major damage to wall (2) Unwanted projections are to be chipped and the wall surface is to be made even, (3) The wall surface is to be plastered to the present level of the wall surrounding the board. (4) The gap between box and wall surface to be filled with suitable filling material.

Supply at site, fixing, testing and commissioning of 04 way modular switch box with concealed metallic flush box as base, mounting plate (modular white plate) confirming to latest IS specification complete in an approved manner. The boxes are to be fixed firmly after doing the 23 following works at the location where the boxes are to be fixed:(1) Required opening for fixing the modular metallic switch box to be made by cutting the wall without causing major damage to wall (2) Unwanted projections are to be chipped and the wall surface is to be made even, (3) The wall surface is to be plastered to the present level of the wall surrounding the board. (4) The gap between box and wall surface to be filled with suitable filling material.

Supply at site, fixing, testing and commissioning of 1 way 6A modular switch 24 confirming to latest IS specification complete on the appropriate modular switch boxes already erected including internal wiring connection in the modular switch box complete in an approved manner as per the section in charge's instruction.

Supply at site, fixing, testing and commissioning of 1 way 16A modular switch 25 confirming to latest IS specification complete on the appropriate modular switch boxes already erected including internal wiring connection in the modular switch box complete in an approved manner as per the section in charge's instruction.

Supply at site, fixing, testing and commissioning of modular type socket 6Asocket, 26 2/3Pin, flush confirming to latest IS specification complete on the appropriate modular boxes already erected including internal wiring connection and earth connection to earth terminal in switch board by 1.5sqmm PVC insulated single core copper conductor complete in an approved manner as per the section in charge's instruction.

Supply at site, fixing, testing and commissioning of modular type socket 16Asocket, 27 5/3Pin, flush confirming to latest IS specification complete on the appropriate modular boxes already erected including internal wiring connection by 4.0sqmm PVC insulated single core copper conductor and earth connection to earth terminal in switch board in an approved manner as per the section in charge's instruction.

Fixing, testing and commissioning of 20 Watts LED Light fitting with Polycarbonate/Metallic body with operating voltage 150-270 V,IP-20 with Round block with patterns 28 on side wall / ceiling with TW round blocks including wiring by 3 C x 1.0 sq.mm PVC insulated & sheathed round flexible copper cable in an approved manner as directed by the Engineer in charge at site. Note: Necessary LED Light fittings will be supplied by Railways

Fixing, testing and commissioning of BLDC fan in the existing fan hook including wiring with 3 C X 1.0 sq.mm PVC insulated & sheathed copper flexible cable in an approved manner and as directed by Engineer in charge at site. (Note: BLDC fan only will be supplied by Railways.)

Fixing, testing and commissioning of Exhaust fan including wall opening, fixing of 30 frame and plastering as required for housing. Exhaust fan including wiring with 3C x 1.0 sq.mm PVC insulated & sheathed copper flexible cable. Note: Necessary Exhaust fan only will be supplied by Railways.

Supply erection of 6m long, GI, octagonal lamp post with one meter length single arm. The price offered is inclusive of the cost of pole(6Mtr), bracket/top cover, arm, foundation bolt, 31 foundation, SMC Sheet with strip connector & Fuse unit, wiring from fuse unit to Light fitting and base plate , required fasteners for assembling, terminal block with rewirable fuse units and wiring to light points and Cable gland to be provided inside the pole. The Octogonal pole should be as per specifications attached in the Annexure-I complete in an approved manner and as directed by Engineer in charge at site.This item requires RITES Inspection before supply.

Fixing testing and commissioning of 45W LED Street light fitting with suitable bracket 32 and other required accessories on the Lamp Standard Post complete in an approved manner and as directed by Engineer in charge at site. Note: Light fittings with lamp only will be supplied by Railways.

Supply at site, erection, testing & commissioning of Horizontal flush/ wall mounting type , powder coated sheet steel , SPN MCB 12 Way distribution board phosphatised and powder coated, Double door with supply and fixing of 1 Nos. of 40 amps DP RCBO with 10 KA short circuit capacity and 30 mA sensitivity, as incoming control with 08 Nos of 6-32 amps SP MCB with 10 KA 33 Breaking capacity as outgoing control, including internal wiring by suitable wire and incoming cable termination using suitable terminal block with suitable cable gland, earthing / neutral din channel complete with all accessories duly making necessary opening on the wall and masonry work for controlling power/lighting/fan circuits in each building in an approved manner as directed by the section in charge at site. Note: 1.Bi-metallic washers must be provided for AL & Cu joints and for others GI bolts, Nuts & washers must be used. 2.Cable termination shall be using GI bolts & nuts with flat and spring washers & lugs invariably. 3. Board shall be fixed in concealed manner.

Supply and fixing of AC Control timer with 32A contactor in enclosure. The Box shall be of 8-module type weather proof cabinet, IP 65, similar to Legrand model no.601998.The box shall 34 be equipped with Digital time switch similar to Legrand make model no.412631 and 2 numbers of 4 no contactor similar to Legrand make model no.412551.The price offered also shall be inclusive of the cost of wiring and fixing of control box with suitable fixing arrangement as concealed/open manner. The timer also shall be used wherever lighting load goes beyond 5kW in an approved manner and as directed by Engineer in charge at site.

Supply, erection, testing, commissioning of 1W Warm White LED Footlight or Pathway fittings with suitable accessories for mounting. The fixture should be rigid, the mounting should be supported with bolts and nuts to be fixed as per manufacturers recommendations, operating voltage 35 range of 100-300 VAC supply, frequency of 50 Hz +/-5% ,IP 64 similar to Luker make model No LOUS04 or its equivalent and including wiring by 3C x 1.0 sqmm PVC insulated & sheathed round flexible copper cable complete in an approved manner and as directed by Engineer in charge at site. The Warranty for the LED Light fitting will be 5 years and the payment condition will be followed as per Special condition-II para no: 31.

Supply, erection and testing of L.T. Earthing arrangements duly stencilling of earth 36 resistance value along with date as per Drg. no. CEE/CN/MS/16-2004, including supply and spreading of salt and charcoal 5 kgs in each for earth treatment etc , including supply / leading / laying /burying and concealing of 4 SWG GI wire from earth electrode to proposed MDB / SDB or elsewhere in an approved manner as directed by Section Engineer in charge at site.