Southern Railway Tender

Supply and provision of mass concrete for platforms or elsewhere with 1:3:6 ratio using 20 mm blue metal complete in a manner as directed by the Section Engineer in charge at site.

Supply and fixing of Cable encasing pipe of 'B' class GI pipes 50mm Dia including one number of clamp made out of MS flat of 40mm x 6mm size, one per meter length of pipe and cable sealing compound units open end where ever required as directed by Engineer in charge at site.

Labour Charges for Laying of 50 mm Dia PE 100,PN 6 type HDPE pipes in the 6 excavated trench, on walls or on platform shelter etc., including suitable fixing arrangement complete in a manner as directed by Section Engineer-in-charge at site. (Note: Required HDPE Pipe will be supplied by Railways.)

Supply and laying of 6 SWG GI wire along with the LTUG Cable, for earth continuity confirming to IS 12776 complete in an approved manner and as directed by Engineer in charge at site.

Supply and fixing of cable route indicator made of cast iron plate type as per specification in drawing No. CEE/CN/MS/11-2004 complete in an approved manner and as directed by Engineer in charge at site.

Labour charges for Laying, testing and commissioning of LTUG power cables of size 9 upto and including 50 sq.mm in the excavated trench/on Building walls/Sheds/Shelters etc., as per IS No:1255 complete in an approved manner and as directed by Engineer in charge at site. Note: LTUG Cables only will be supplied by Railways.

Fabrication, Supply and fixing of Cable fixing clamps of suitable sizes made out of MS flat of 40mm x 6mm size including painting suitable for clamping/fixing of LTUG cables on the walls/ building/ sheds/ shelters etc., using bolts and nuts as desired by Section Engineer-in-charge at site.

Supply and concealing of rigid PVC conduits of 20 mm Dia confirming to IS 11 9537/P3/1983 or latest (ISI marked) with wall thickness not less than 2.0mm along with the all accessories and including cutting the wall/ceiling/chipping and re plastering the same as good condition as directed by Engineer in charge at site.

Supply and concealing of rigid PVC conduits of 25 mm Dia confirming to IS 12 9537/P3/1983 or latest (ISI marked) with wall thickness not less than 2.0mm along with the all accessories and including cutting the wall/ceiling/chipping and re plastering the same as good condition as directed by Engineer in charge at site.

Supply and fixing of PVC conduits (IVORY colour) of 20mm Dia confirming to 13 IS:9537/P3/1983 or latest(ISI Marked) with wall thickness not less than 2.0 mm, all accessories on existing wall/stanchion/portal/column and clamped at regular intervals as directed by Engineer in charge at site.

Supply and fixing of PVC conduits (IVORY colour) of 25mm Dia confirming to 14 IS:9537/P3/1983 or latest(ISI Marked) with wall thickness not less than 2.0 mm, all accessories on existing wall/stanchion/portal/column and clamped at regular intervals as directed by Engineer in charge at site.

Supply and wiring by 4 nos of 10.0 sq.mm (3 phase) PVC insulated FRLS type flexible 15 copper cable conforming to IS.No:694,1100 V grade with 1 no of 14 SWG tinned copper wire/10.0 sq.mm flexible copper cable through PVC conduit pipe already fixed. The Color coding shall be followed as directed by Engineer in charge at site(4 nos of 10.0 sq.mm copper cable and 1 no of 14 SWG tinned copper shall be taken as 1 Mtr for measurement purpose)

Supply and wiring (single phase) including termination by 3 nos. of 6 sqmm PVC 16 insulated FRLS type flexible copper cable conforming to IS. No: 694, 1100 V grade through PVC conduit already fixed by concealed/open manner. Color coding shall be followed as directed by Engineer in charge at site(3 nos. of 6 sqmm copper cable wire shall be taken as 1 Mtr for measurement purpose).

Supply and wiring (single phase) including termination by 3 nos. of 4 sqmm PVC 17 insulated FRLS type flexible copper cable conforming to IS. No: 694, 1100 V grade through PVC conduit already fixed by concealed/open manner. Color coding shall be followed as directed by Engineer in charge at site(3 nos. of 4 sqmm copper cable wire shall be taken as 1 Mtr for measurement purpose).

Supply and wiring (single phase) including termination by 3 nos. of 2.5 sqmm PVC 18 insulated FRLS type flexible copper cable conforming to IS. No: 694, 1100 V grade through PVC conduit already fixed by concealed/open manner. Color coding shall be followed as directed by Engineer in charge at site(2 nos. of 2.5 sqmm copper cable wire shall be taken as 1 Mtr for measurement purpose).

Supply and wiring including termination for lights, fans and calling bell points etc. by 3 19 nos. of 1.5 sqmm PVC insulated fire retardant low smoke (FRLS) flexible copper cable, conforming to IS. No: 694, 1100 V grade through existing PVC pipes already laid including, three plate ceiling rose and other accessories. Color coding shall be followed as directed by Engineer in charge at site.(Up to 3 m long points).

Supply and wiring including termination for lights, fans and calling bell points etc. by 3 nos. of 1.5 sqmm PVC insulated fire retardant low smoke (FRLS) flexible copper cable, conforming to IS. No: 694, 1100 V grade through existing PVC pipes already laid including, three plate ceiling rose and other accessories. Color coding shall be followed as directed by Engineer in charge at site.(Above 3 m and up to and including 7 m long points).

Supply and wiring including termination for lights, fans and calling bell points etc. by 3 21 nos. of 1.5 sqmm PVC insulated fire retardant low smoke (FRLS) flexible copper cable, conforming to IS. No: 694, 1100 V grade through existing PVC pipes already laid including, three plate ceiling rose and other accessories. Color coding shall be followed as directed by Engineer in charge at site (Above 7 m long points).

Supply at site, fixing, testing and commissioning of 12 way modular switch box with concealed metallic flush box as base, mounting plate (modular white plate) confirming to latest IS specification complete in an approved manner. The boxes are to be fixed firmly after doing the 22 following works at the location where the boxes are to be fixed: (1) Required opening for fixing the modular metallic switch box to be made by cutting the wall without causing major damage to wall (2) Unwanted projections are to be chipped and the wall surface is to be made even, (3) The wall surface is to be plastered to the present level of the wall surrounding the board. (4) The gap between box and wall surface to be filled with suitable filling material.

Supply at site, fixing, testing and commissioning of 08 way modular switch box with concealed metallic flush box as base, mounting plate (modular white plate) confirming to latest IS specification complete in an approved manner. The boxes are to be fixed firmly after doing the 23 following works at the location where the boxes are to be fixed: (1) Required opening for fixing the modular metallic switch box to be made by cutting the wall without causing major damage to wall (2) Unwanted projections are to be chipped and the wall surface is to be made even, (3) The wall surface is to be plastered to the present level of the wall surrounding the board. (4) The gap between box and wall surface to be filled with suitable filling material.

Supply at site, fixing, testing and commissioning of 04 way modular switch box with concealed metallic flush box as base, mounting plate (modular white plate) confirming to latest IS specification complete in an approved manner. The boxes are to be fixed firmly after doing the 24 following works at the location where the boxes are to be fixed:(1) Required opening for fixing the modular metallic switch box to be made by cutting the wall without causing major damage to wall (2) Unwanted projections are to be chipped and the wall surface is to be made even, (3) The wall surface is to be plastered to the present level of the wall surrounding the board. (4) The gap between box and wall surface to be filled with suitable filling material.

Supply at site, fixing, testing and commissioning of 1 way 6A modular switch 25 confirming to latest IS specification complete on the appropriate modular switch boxes already erected including internal wiring connection in the modular switch box complete in an approved manner as per the section in charge's instruction.

Supply at site, fixing, testing and commissioning of 1 way 16A modular switch 26 confirming to latest IS specification complete on the appropriate modular switch boxes already erected including internal wiring connection in the modular switch box complete in an approved manner as per the section in charge's instruction.

Supply at site, fixing, testing and commissioning of Dummy plate suitable for modular box mentioned in the schedule No;22-24 wherever required with necessary fixing by suitable screws & nuts in approved manner as directed by the Engineer in-charge at site.

Supply at site, fixing, testing and commissioning of modular type socket 6Asocket, 28 2/3Pin, flush confirming to latest IS specification complete on the appropriate modular boxes already erected including internal wiring connection and earth connection to earth terminal in switch board by 1.5sqmm PVC insulated single core copper conductor complete in an approved manner as per the section in charge's instruction.

Supply at site, fixing, testing and commissioning of modular type socket 16Asocket, 29 5/3Pin, flush confirming to latest IS specification complete on the appropriate modular boxes already erected including internal wiring connection by 4.0sqmm PVC insulated single core copper conductor and earth connection to earth terminal in switch board in an approved manner as per the section in charge's instruction.

Supply, Fixing, testing and commissioning of LED Batten light with complete fixtures having 20W with available LED Efficacy of minimum 130 (Lumen / Watt), Color Temperature (in K) of 6500 (Cool white), Housing Material of Polycarbonate, Diffuser Material of Polycarbonate, with Inbuilt 30 Driver/Control gear, Ingress Protection of IP-20, Color Rendering Index (CRI) - Minimum 80, Operating Voltage range of 100 to 300 V, Frequency 50 Hz. The fitting should be provided with fixing arrangement on the ceiling/wall.The fitting shall be fixed with Round block with patterns on side wall/ceiling with TW round blocks including wiring by 3C x 1.0 sqmm PVC insulated & sheathed round flexible copper cable in an approved manner as directed by Engineer in charge at site. The Warranty for the LED Light fitting will be 5 years and the payment condition will be followed as per Special condition-II para no: 31.

Supply,Fixing,Testing and commissioning of 35W Post Top Lantern IP65,aesthetically designed, die cast aluminium landscape luminaire similar to Havells model no:ENDURASPRING6PT35WLED757PSYMTOTG to be mounted with suitable Eco pole 4M top with pole dia 76mm hot dipped galvanized mild steel step pole with grey powder finish with STARK Decorative 31 pole base cover with all accessories complete with suitable concrete foundation as per manufacturers recommendation for the fixtures and wiring by 3 C x 1.0 sq.mm PVC insulated & sheathed round flexible copper cable in an approved manner as directed by section Engineer in charge at site. in an approved manner and as directed by Engineer in charge at site. The Warranty for the LED Light fitting will be 5 years and the payment condition will be followed as per Special condition-II para no: 31.

Supply, Fixing, Testing and commissioning of 9W LED Spike Light decorative IP66 similar to Havells model no:LYCUSSPS9WLED730PSYMBOTG with suitable mounting accessories and 32 wiring by 3 C x 1.0 sq.mm PVC insulated & sheathed round flexible copper cable complete in an approved manner to be installed as per manufacturers recommendations and as directed by Engineer in charge at site. The Warranty for the LED Light fitting will be 5 years and the payment condition will be followed as per Special condition-II para no: 31.

Supply, Fixing, Testing and commissioning of 8W LED Bollard Light aesthetically designed aluminium landscape, IP65 luminaire for diffused lighting similar to Havells model no:BAMBOOBLS8WLED830PSYMTOPC with suitable mounting accessories with pole of height 1m or 33 above compatible for the above bollard with terminal connections & mounting accessories suitable concrete foundation along with wiring by 3 C x 1.0 sq.mm PVC insulated & sheathed round flexible copper cable in an approved manner to be installed as per manufacturers recommendations as directed section Engineer in charge at site The Warranty for the LED Light fitting will be 5 years and the payment condition will be followed as per Special condition-II para no:31.

Fixing, testing and commissioning of BLDC fan in the existing fan hook including wiring with 3 C X 1.0 sq.mm PVC insulated & sheathed copper flexible cable in an approved manner and as directed by Engineer in charge at site. (Note: BLDC fan only will be supplied by Railways.)

Fixing, testing and commissioning of Exhaust fan including wall opening, fixing of 35 frame and plastering as required for housing. Exhaust fan including wiring with 3C x 1.0 sq.mm PVC insulated & sheathed copper flexible cable. Note: Necessary Exhaust fan only will be supplied by Railways.

Supply, lowering and commissioning of Five star rated single phase, Open well 36 horizontal submersible pump of 1.5HP,Head range: 24 to 36 Meter, Discharge/flow rate:2.8 to 0.7 LPS with necessary control panel. Warranty: Minimum 1 year complete in approved manner and as directed by Engineer in charge at site.

Supply and wiring including termination by 3 core 2.5 sqmm PVC insulated flexible 37 submersible copper flat cable conforming to IS.No:694:2010 latest,1100 V grade Type test certificate from NABL approved lab as per IS:7098 part 2 2011 should be submitted at the time of supply complete in an approved manner and as directed by Engineer in charge at site.

Supply at site, erection, testing & commissioning of Vertical flush/ wall mounting type , powder coated sheet steel , TPN MCB 8 Way distribution board phosphatised and powder coated, Double door with supply and fixing of 1 Nos. of 63 amps FP MCB with 10 KA breaking capacity , as incoming control with 04 Nos. of 6-32 amps TP MCBs with 10 KA breaking capacity,12 Nos of 6-32 amps SP MCB with 10 KA Breaking capacity as outgoing control, including internal wiring by suitable wire and incoming cable termination using suitable terminal block with suitable cable gland, earthing / neutral din channel complete with all accessories duly making necessary opening on the wall and masonry work for controlling power/lighting/fan circuits in each building in an approved manner as directed by the section in charge at site. Note: 1.Bi-metallic washers must be provided for AL & Cu joints and for others GI bolts, Nuts & washers must be used. 2.Cable termination shall be using GI bolts & nuts with flat and spring washers &lugs invariably. 3. Board shall be fixed in concealed manner.

Supply at site, erection, testing & commissioning of Horizontal flush/ wall mounting type , powder coated sheet steel , SPN MCB 12 Way distribution board phosphatised and powder coated, Double door with supply and fixing of 1 Nos. of 40 amps SPN RCBO with 10 KA short circuit capacity, as incoming control with 01 Nos. of 40 amps DP MCBs with 10 KA breaking capacity,04 Nos of 6-32 amps SP MCB with 10 KA Breaking capacity as outgoing control, including internal wiring by 39 suitable wire and incoming cable termination using suitable terminal block with suitable cable gland, earthing / neutral din channel complete with all accessories duly making necessary opening on the wall and masonry work for controlling power/lighting/fan circuits in each building in an approved manner as directed by the section in charge at site. Note: 1.Bi-metallic washers must be provided for AL & Cu joints and for others GI bolts, Nuts & washers must be used. 2.Cable termination shall be using GI bolts & nuts with flat and spring washers & lugs invariably. 3. Board shall be fixed in concealed manner.

Supply, erection and testing of L.T. Earthing arrangements duly stencilling of earth 40 resistance value along with date as per Drg. no. CEE/CN/MS/16-2004, including supply and spreading of salt and charcoal 5 kgs in each for earth treatment etc , including supply / leading / laying / burying and concealing of 4 SWG GI wire from earth electrode to proposed MDB / SDB or elsewhere in an approved manner as directed by Section Engineer in charge at site.