Southern Railway Tender

Fixing testing and commissioning of 20W LED light fitting with Polycarbonate/Metallic Body with operating voltage 150-270V, IP-20 with LED Batten and Tube complete against 4 manufacturing defects. Fitting shall be fixed in the platform shelter, FOB, walls, ceiling with suitable clamping arrangement including wiring by 3 C x 1.0 sq.mm PVC insulated & sheathed round flexible copper cable in an approved manner as directed by the Engineer in charge at site. (Note: Necessary LED Light fittings will be supplied by Railways)

Fixing testing and commissioning of 40W LED light fitting with Polycarbonate/Metallic Body with operating voltage 150-270V, IP-20 with LED Batten and Tube complete against manufacturing defects. Fitting shall be fixed in the platform shelter, FOB, walls, ceiling with suitable clamping arrangement including wiring by 3 C x 1.0 sq.mm PVC insulated & sheathed round flexible copper cable in an approved manner as directed by the Engineer in charge at site. (Note: Necessary LED Light fittings will be supplied by Railways)

Fixing, testing and commissioning of BLDC fan including supply and fixing of suitable fan hook, clamp with accessories and wiring by 3 C X 1.0 sq.mm PVC insulated & sheathed copper flexible cable. (Note: BLDC fan only will be supplied by Railways.)

Supply, erection and testing of L.T. Earthing arrangements duly stencilling of earth 7 resistance value along with date as per Drg. no. CEE/CN/MS/16-2004, including supply and spreading of salt and charcoal 5 kgs in each for earth treatment etc , including supply / leading / laying / burying and concealing of 4 SWG GI wire from earth electrode to proposed MDB / SDB or elsewhere in an approved manner as directed by Section Engineer in charge at site.

Supply and Installation of Junction Boxes, pipes & flexible conduit of FRP JB (IP 65) Size:260x210x116 mm with stud type terminal suitable for terminating 2 nos of 16/25 sqmm armoured cable,The junction box should be 2.7 mm thick with electrically insulated body shock proof, 8 connector leads and control equipped with 1 nos 16 Amps rewirable fuse and its necessary cutout. The box should be of front door opening with rubber gasket to make it water tight. The junction box shall be vermin proof having rubber bushes at cable entry. the junction box shall be mounted on pole/wall etc at the height of 1.50 mtrs or as per site condition by providing MS clamps of suitable size. Color of junction box shall be got approved before erection. The junction box shall be erected in an approved manner as per the site condition and instruction of Engineer in charge at site.

Supply, Erection, testing & commissioning of SMC box 150x150x150mm with 1 No in 9 each of 6A strip connector, 16 A porcelain fuse carrier & ceiling rose including locking arrangements, internal wiring and MS clamp for fixing arrangements on existing stanchion/portal/column/wall as directed by the Engineer in charge at site. Note: This item requires RITES Inspection prior to supply.

Supply and wiring (Single phase) including termination by 2 runs of 1.5 sq mm FRLS PVC insulated copper cables for phase and neutral and 1 run of 1.5 sq mm FRLS PVC insulated flexible copper cable for earth through existing PVC pipes already laid.

Supply and fixing of PVC conduits (IVORY colour) of 20mm Dia confirming to 11 IS:9537/P3/1983 or latest(ISI Marked) with wall thickness not less than 2.0 mm, all accessories on existing wall/stanchion/portal/column and clamped at regular intervals as directed by Engineer in charge at site.

Supply and fixing of PVC conduits (IVORY colour) of 25mm Dia confirming to 12 IS:9537/P3/1983 or latest(ISI Marked) with wall thickness not less than 2.0 mm, all accessories on existing wall/stanchion/portal/column and clamped at regular intervals as directed by Engineer in charge at site.

Supply and fixing of IP66 class powder coated metallic cable looping box of 250 x 300 13 x 150 mm size made of CRCA draw quality sheet steel 1.2 mm thickness similar to BCH make BIL 60020 with suitable fixing arrangement on wall/structures. The rate includes provision of hylum sheet of suitable size and 1 no of 100A 4 way terminal connectors and 2 nos of cable glands of suitable size as directed by the Engineer in charge at site.

SETC of wall mounting mobile charging unit consisting of 6 Way Modular box with 10 A SP Mini MCB with i) 2.1 A USB Charging point - 4 Nos ii) 2.1 A (TYPE-C) Charging point - 1 No, Rack 14 Type Charging Station suitable for charging multiple no. of devices simultaneously (Min 5 Nos). The Unit should include in built MS stand/tray to hold min 5 numbers of mobile phones under charge. Enclosure material made of mild steel and powder coated including internal wiring by 2.5 sq.mm multistrand copper in an approved manner as directed by Engineer in charge at site.

Supply, installation testing and commissioning of 20 Mtr High Mast complete with panel, foundation, fencing and all associated accessories as per technical specification shown in Annexure-II.

Supply, installation, testing and commissioning of 240 Watt LED Flood light IP 66 with operating voltage 90 to 300 Volts AC at 50 Hz+/-2 frequency, having beam angle >/=120 degree and Efficacy >/=135 Lm/Watt complete with all accessories in an approved manner and as directed by Engineer incharge at site. The Warranty for the LED Light fitting will be 5 years and the payment condition will be followed as per Special condition-II para no:31.