Southern Railway Tender

"Supply and Single phase wiring by means of 2 nos. of 4 Sq.mm (P&N) and 1 No. of 6 Sqmm (Earth) size Flame Retardant Low Smoke & Halogen (FR- LSH) PVC insulated single core 04 multistranded flexible copper cable with ISI mark of approved make with coded color for Phase, Neutral and Earth through already erected PVC casing and capping or pipes, junction boxes, distribution boards etc., Preferable Makes of FR-LSH Cables :- Poly Cab, Havells,V-Guard, Bonton or any other reputed makes, "

"Supply and fixing of precooling box made with 14SWG CRCA sheet with the followings 1) 4P 100A MCB - 1No. 2) 4P 100A, 300mA RCCB - 1No. 3) 2P 16A MCB - 2 Nos. Note:- 1) Approximate Size of the said box is 500mm x 500mm x 250mm, size may vary as directed by site engineer 05 incharge. 1) Double door type with hinges has to be provided for accessing of MCBs i.e upper portion of the pre-cooling box 1) Internal wiring has to be done with 25 Sq.mm flexible copper wire. 1) Sufficient space has to be provided for fixing of Panel Mounting Socket (125A) Angled Watertight. 2) This scope of work excludes supply and Fixing of Panel mounting sockets " 3) Specimen copy enclosed

"Supply and Fixing of 125A (3P+N+E) Panel Mounting Socket Angled Watertight similar to Hensel model No. 579 with suitable fixing arrangements. Note:- Internal wiring has to be done with 25 Sq.mm flexible copper wire."

Supply and Fixing of 125A (3P+N+E) Plug Watertight similar to Hensel model No. 279 with suitable fixing arrangements.

"Supply and fixing of Poly carbonate Enclosure Cable Looping box of similar to model 08 No.Mi 0600/0601 with the following 50x6x200mm Copper bus bar - 4 Nos The power cable (4C 70 to 4C 120 Sq.mm XLPE) as Incoming and Out going has to be terminate in Copper Bus bar. And 4 Nos of 25Sqmm Copper cable is to be connected to Copper Bus Bar."

Supply and wiring to pre-Cooling Plug socket by means of 4 Runs of Flame Retardant 09 (FR) PVC insulated single core multistranded flexible copper cable of size 25 sq.mm drawn through 50mm dia PVC pipe including clamping of PVC pipe along the rail post/PF Shelter/Pillar with suitable MS painted fixing hardware (1m = 4 Runs of 25 Sq.mm copper wire)

Supply and fixing of 50mm dia Flexible PVC pipe with clamps, suitable fixing arrangements as directed by site engineer incharge.

"Supply, Erection, Testing and Commisioning of out door type feeder pillar bunk made in 14 SWG CRCA MS sheet with the following Incoming: 63 A 4 pole MCCB with thermal magnetic release similar to L&T model No. DZ1F0063DXD1A, out going a) 4Pole MCB- 32A - 4 Nos, b) 2P RCCB 11 25A/100mA - 1 No. c) 2P MCB - 16A - 2 nos. d) Conventional analog type Timer - 1No., e) 20A 4Pole contactor -1 No. f) 63A 4way stud connector - 4 Nos. Note:- 1) Suitable size of plinth or frame work using L angles (Approximate size of 40x40x6mm L angle ) has to be constructed by the contractor as directed by site engineer incharge 2) Approximate size of the feeder pillar bunk 1000mm (Height) X 400mm (Wide)"

"Supply, erection, testing and commisioning of outdoor type feeder pillar bunk made in 14 SWG CRCA MS sheet with the followings Incoming: 1) 200 A fuse 3 Nos. and 200A Neutral link- 1No. 2) Three phase Energy meter-1 No. 3) 1 No. of 250 A 4 pole MCCB with thermal magnetic release similar to L&T model No. CM92109OOP1OG Out going 1) 2 No. of 160A 4 pole MCCB with 12 thermal magnetic release similar to L&T Model No. DZ1F0160DXD1A 2) 1 No.of Daily/Weekly Programmable Electronic 110/240V AC Crono Timer switch Similat to (L&T) Model No.67DDT0. 3) 2 Nos of 32A 4 Pole contactor similar to L&T Model No. CS97011. Note:- 1) Suitable size of plinth or frame work using L angles (Approximate size of 40x40x6mm L angle ) has to be constructed by the contractor as directed by site engineer incharge 2) Approximate size of the feeder pillar bunk 1000mm (Height) X 1500mm (Wide)"

"Design, Supply, Erection, Testing & Commissioning of Non Essential panel of 14SWG MS Sheet Medium Voltage Main Distribution Board. ( MTDB ) Incoming 1) 1 Nos. of MCCB 4 Pole 160A, 36kA with micro-processor release, Ground fault Protection similar to L&T model No. 13 CM92152OOOOX1. Out Going 1) 3 Nos. of MCCB 4 Pole 40A, 36kA with microprocessor release, Ground fault Protection similar to L&T model No. CM92155OOOOX1. 2) 4 Nos. of MCB 4 Pole 32A, 3) 4 Nos of MCB 4 Pole 16 A 4) 6 Nos of 2P MCB 16A 5) 1 No. of 3 Phase Volt meter. 6) 1 No. of 3 Phase Ammeter. 7) LED Indication lamp. 8) Electrolytic copper bus bar of size 300 Sq.mm (main) and Other standard fittings conforming to relevant IS. Note :- 1) Makes of MCB/MCCB/ELCB is L&T/Legrand/ABB/Siemens. 2) All MCCB has to be fitted with Spreader & ROM "

"Supply, erection, testing and commissioning of Octagonal poles of 4 m high with 14 decorative Double arm, Top dia 70mm, Bottom dia 130mm, sheet thickness 3mm, with suitable casting of cement concrete foundation & muffing Including Supply,fixing of 2 Nos of 40W to 50W LED Street light and wiring to the LED Fittings. Note :-Drawing to be submitted for approval before fabrication of Octagonal poles."

"Supply and erection of 300 x 50mm size 14 SWG Hot dipped GI perforated tray for 15 cable laying with Suitable fixing Arrangements As directed by Site Engineer. Preferable Makes :- JSW, ESSAR, TATA or any other reputed madek Note:- 1) The scope of work includes supply and fixing of suitable length & size of thread rods and strut channels etc..,"

"Transportation &Laying / clamping / threading of 4 Core XLPE cable (Size above70 16 Sq.mm upto and including 120Sq.mm) through trench, Cable protection pipe, Wall/shelters, FOB, etc as directed at site, with suitable clamps and termination duly supplying required Aluminium sockets, etc., Note: - Cable will be supplied by Railway from the Office of SSE/Electrical In-Charge of the work."

"End termination using single brass compression gland of Size from 4 core 70 Sq.mm 17 up to & Including 4 Core 95 Sq.mm with required aluminium sockets, etc.., Note:- 1) Scope of work including supply and Fixing of said glands 2) PVC type glands may be used for cable termination in the poly carbonate box as directed by site engineer incharge."

"End termination using single brass compression gland of Size from 4 core 120 Sq.mm 18 up to & Including 4 Core 185 Sq.mm with required aluminium sockets, etc.., Note:- 1) Scope of work including supply ad Fixing of said glands 2) PVC type glands may be used for cable termination in the poly carbonate box as directed by site engineer incharge."

"Supply at site and fixing of Transparent/Opaque type Poly carbonate box Similar to model No. KG 9003/KG 9003 IN fitted with the followings 1) 32A DP MCB - 1 No. 2) 18A DP Contactor similar to L&T model No. CS90236 - 1No."

"Supply at site and fixing of Transparent/Opaque type Poly carbonate box Similar to 20 model No. KG 9003/KG 9003 IN fitted with the followings 1) 100A 4 Way Connector - 1 No. 2) 1 No.of Daily/Weekly Programmable Electronic 110/240V AC Crono Timer switch Similar to (L&T) Model No.67DDT0. 3) 40A FP MCB - 1No."