National Highways Authority Of India Tender
Search from a plethora of business opportunities for Tamil Nadu tenders posted on the eProcurement TamilNadu website and other online and offline sources. Here, on BidAssist, you can find the best tender opportunities to boost your enterprise by finding work in Tamil Nadu government tenders, PSUs, Municipal Corporations and more. Read on to learn about the bidder registration process, DSC and more.
National Highways Authority Of India - NHAI Tender
Road Construction
Eprocure
Opening Date16 Dec 2024
Closing Date30 Dec 2024
Tender Amount₹ 12,35,83,557
Costs
EMD
₹ 24,72,000Document Cost
₹ 50,000Tender Fee
Refer Documents
Summary
Annual Maintenance Including Incident Management Of Trichy To Karaikudi Section Of Nh-210 (new Nh-336,36 And 536) Including Trichy Bypass Of Nh-67
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_NHAI_213531_2Tender No
NHAI/17011/01/112/2024/RO MaduraiTender Authority
National Highways Authority Of India ViewPurchaser Address
-Website
http://https://nhai.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
a)Bridges
30
9003
270090
... More
b) Slab/Box/Pipe culverts
252
2465
621180
... More
Providing and laying of plain cement concrete M-20 grade in foundation, levelling course etc. Including centering and shuttering all complete as per drawings and technical specification (part I/II) Section 1500 & 1700 and as direction by the engineer.
-
-
-
... More
To attend the repair work of parapet walls and other structural works etc.
14
7751
108514
... More
Providing and laying of 100 mm thick M-10 grade cement concrete on median/island top & on earthen shoulder in the metal beam locations to control the growth of vegetation/bushes as direction by the engineer.
1874.5
5148
9650882
... More
Carriageway cleaning
-
-
-
... More
Carrying out proper cleaning , and removing of dust/silt/trash/plastic/ rubbish/garbage/waste from the main carriageway (total width of carriageway) by mechanical means and from shoulders up to toe line of the embankment including side slopes manually and disposing of the waste material at a suitable place outside ROW as directed by the Engineer and as per road maintenance Standard clause no.6.1.21,6.2,6.3,6.4 of IRC-SP 124-2019. The job includes cleaning of expansion joints, water spouts, vent holes, road studs and delineators also.
-
-
-
... More
2 lane Rural area (Frequency of cleaning will be quarterly) From Km 10+000 to 91+054 of Old NH-210 including Trichy bypass 110+016 to 135+930 of NH-67
427.87
4344
1858967
... More
Removal of rank vegetation /weeds and undesirable vegetations from shoulders, embankment slopes up to ROW (both side) complete in all respect including breaking of clods, rough dressing and disposal of waste material and vegetation at a place outside ROW as per direction of Engineer in charge and as per road maintenance Standard clause no.6.14 of IRC-SP 95-2011.Removal of rank vegetation (Frequency twice in year) From Km 10+000 to 91+054 of Old NH-210 including Trichy bypass 110+016 to 135+930 of NH-67
7958052
6
51249855
... More
Road property Management
-
-
-
... More
Providing, painting, lettering and fixing of distance measurement stones including dismantling of old damaged/broken ones confirming to MORTH Rev.V technical specification and IRC:SP-73 - 2015,IRC:SP:95-2011 Clause 6.10, IRC:8 & IRC:26.
From Km 10+000 to 91+054 of Old NH-210 including Trichy bypass 110+016 to 135+930 of NH-67
-
-
-
... More
a) Hectometers stone
10
954
9540
... More
b) Km stone
5
3321
16605
... More
Two coat painting with synthetic enamel paint in all Shades on Concreate Surface Stones and printing letters with approved quality synthetic enamel paint on both sides as per MoRTH Specification, IRC & as directed by Enginner .Trilingual as per NHAI circular
-
-
-
... More
a) HM stones including lettering
10
53
534
... More
b) KM stones including lettering
5
222
1114
... More
Painting two coats with approved quality enamel paint on road sign post, gantry, toll plaza canopy & safety barrier in lanes complete in all respect conforming to respective IRC/MoRTH Specifications and as directed by Enginner .
-
-
-
... More
Road sign posts including gantry posts, Gantry posts, Frame of gantry and cantilever, Toll plaza canopy pillars and Toll plaza top Canopy members & Ms pipes
3084.73
122
376337
... More
Smooth surface on concrete with synthetic enamel paint
-
-
-
... More
i) Bulnose/bellmouthKerb at toll plaza lanes, Kerb at toll plaza lanes and For cross drinage structures handrails/concrete crash barrier
4907.74
122
598744
... More
Providing and laying Tack Coat over Existing BT surface using 2 Kg of Bitumen Emulsion (RS1)per 10sqm for preparatory to another bituminous construction over it including cost of material, labour charges, rentals for machinery, fuel and all other incidental charges etc., complete as per Clause 503 of MORTH Rev-5
625
15
9375
... More
Providing and laying Bituminous Concrete to 30/40 mm thick using 0.13cum of 19.00-9.50mm, 0.17cum of 9.50-2.36mm and 0.26cum of 2.36 and below with 50.30kgs of VG40 bitumen for premixing per 10sqm including cost and conveyance of all materials to CMP site, heating the bitumen and aggregate to required temperature and mixing the min required temperature in central hot mix plant 20-30 ton capacity, conveying the mix by tipper trucks to paver site, spreading the mix to uniform thickness of 40mm with mechanical paver to the specified grades and cross sections and consolidated by 8-10tonne Vibratory Roller to the required density etc., including labour for attending to paver to site etc., including hire charges and fuel charges for 20-30t CMP with bitumen boiler, tipper trucks, Paver Finisher, Vibratory roller and all other tools and plant required, including fuel and all other incidental charges etc., complete as per specification using CMP as per clause 507 of MORTH Rev-5
25
10915
272875
... More
Traffic safety items
-
-
-
... More
Providing and fixing retro-reflective stickers (Engineering grade) of size 10 cmx 5cm on MBCBs and other structures as per MORTH CI no.801 and as per approval of Engineer in charge.
2000
22
44000
... More
Supplying and fixing of solar lights at bus shelter:-
Providing and erecting street light mounted on a steel octagonal street light pole of standard specifications for street lighting, 7m high of 40 watts with 6000 LMNS. The Solar light shall be fixed firmly in the concrete foundation as directed by the Engineer - in - charge. The warranty so provided by the supplier will be in the name of NHAI. (2 LED solar lights in 1 bus shelter)
Locations: From Km 10+000 to 91+054 of Old NH-210 including Trichy bypass 110+016 to 135+930 of NH-67
112
64500
7224000
... More
Fixing of Rigid Median Marker
-
-
-
... More
Providing fixing of Rigid Median Marker double sided made of polycarbonate for impact resistance and good weather ability. Polycarbonate used for molding the median marker shall have a minimum Izod impact strength value of 600 J/m at room temperature. The impact strength of the poly carbonate should not decrease to less than 70% of its initial value on being subjected to UV weathering as per ASTM G 155 for 1000 hours or exposure to 2 years of natural weathering. The body of the median marker shall be in the form of an isosceles trapezoidal structure of length 15 cm height and width of 10 x 10 cm. The median marker shall have fluorescent yellow retro - reflective sheeting confirming to Type XI specifications as per ASTM D 4956. Area of reflective sheeting should not be less than 70 cm2. Edge of retro reflective shall be concealed using a grill/mesh/similar mechanism to prevent vandalism and sheeting pilferage. The logo of the manufacturer shall be embossed and painted in contrasting colour on both side of median marker for distinct identification.
500
470
235000
... More
High mast light
-
-
-
... More
16 m high hot dip galvanised mast suitable to mount 8 No in assymmetrical type mounting along with high-quality integrated LED Flood light with a minimum system iumen of 24100 Lm and system wattage not exceeding 195W with a nominal efficiency 130 lumen/watt and luminaire shoud have medium Asymmetric and symmetric optics. The housing should be of non corrosive high-pressure die-cast aluminum to with stand extreme environments. Confirming to Minimum 40 Lux as per IRC 4 lane manual designed as per IS:875 (Part 3) -1978, fitted with a base flange, door at the base of mast with heavy duty Intenal lock, fantern carriage, suitable winching arrangement with Motor for lifting of Light fixing, Timer switch for ON/OFF, Cost includes foundation, errection and transportation including supply and laying of reqired cable for getting electrical connection from TNEB and all costs to be paid toTNEB. at Km.82+500 & Km.91+050 in NH-536 and 118+000 in NH-83. Electric consumption charges will be paid by Authourity.
3
528100
1584300
... More
Providing and erecting of Direction and Place Identification Retro-reflectorised Signs made out of Cube Corner Micro Prismatic Grade Sheeting confirming to Type-XI standards of IRC-67: 2012 and ASTM D 4956 –09, specification and fixed over 2mm thick Aluminium sheet fixed over a back supporting frame of 25mmx25mmx3mm Mild Steel angle and supported on a mild steel angle post 75X75X6mm with a clear height of not less than 2.10m from the ground level to the bottom of the sign board and 0.60m below ground level. The sign post should be painted as per IRC 67-2012 and firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45cmX45cmX60cm size including cost and conveyance of all materials, equipment, Machinery and labour with all leads and lifts, loading charges necessary for satisfactory completion of the work as directed by the engineer-in-charge. Micro Prismatic grade Retro - Reflectro sheet shall consist of minimum coefficient of Retro-reflection as per Table 6.9 of IRC 67-2012. The retro -reflective sheeting shall be covered under 10 year warranty issued for field performance and a certified copy of three years outdoor exposure report shall be obtained as per IRC 67:2012. ( as per MoRT&H Specification No.801)
48.86
14355
701443
... More
Replacement of existing Type- XI Retro-Reflectorised sign with an aluminum sheet over the existing Overhead Gantry and Cantilever post and frame with trilingual information as per NHAI circular:-
Replacement of sign boards on existing Overhead Gantry and Cantilever post and frame with trilingual information as per NHAI circular:-Informatory sign made of cube corner Micro Prismatic grade sheeting conforming to Type XI standards of IRC67 - 2022 and ASTMD4956 – 09, applied with electro-cutable film and applied to properly prepared sign substrate, fixed over 2mm thick aluminum/4mm thick aluminium composite panel with 0.5mm thick Aluminum Film sheet with back supporting and installed as per clause 802.7. The micro-prismatic grade reflector sheet should have minimum co-efficient of retro-reflection values as per the table 6.9 of IRC 67-2022. The retro-reflective sheeting shall be covered under 10 years warranty issued for field performance and a certified copy of the completed three years Outdoor exposure report shall be obtained before bill submission. The existing sign board (Sheet only) belongs to the property of the Contractor. (From Km 10+000 to 91+054 of Old NH-210 including Trichy bypass 110+016 to 135+930 of NH-67)
-
-
-
... More
Cantilever signs
48
11600
556800
... More
Overhead gantry signs
144
-
1670400
... More
Canopy sign board
158.4
-
1837440
... More
Information sign board more than 0.90 sqm
110.39
-
1280524
... More
Compliance with Road safety Audit observations & Remedial Measures in Hotspot locations
-
-
-
... More
Fixing of Sign Boards
-
-
-
... More
Providing and Erecting of Retro - Reflectorised Hazard Marker Traffic Sign made out of High Intensity Prismatic Grade Sheeting confirming to Type-IV standards of IRC-67: 2012 and ASTM D 4956 –09, specification and fixed over 2mm thick Aluminium sheet fixed over a back supporting frame of 25mmx25mmx3mm Mild Steel angle and supported on a mild steel angle post 75X75X6mm and 0.60m below ground level. The sign post should be painted as per IRC 67-2012 and firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45cmX45cmX60cm size including cost and conveyance of all materials, equipment, Machinery and labour with all leads and lifts, loading charges necessary for satisfactory completion of the work as directed by the engineer-in-charge. High intensity Retro - Reflectro sheet shall consist of minimum coefficient of Retro-reflection as per Table 6.6 of IRC 67-2012. The retro- reflective sheeting shall be covered under 7 year warranty issued for field performance and a certified copy of three years outdoor exposure report shall be obtained as per IRC 67:2012. (as per MoRT&H Specification No.801) 30cm x 90cm rectangular. (From Km 10+000 to 91+054 of Old NH-210 including Trichy bypass 110+016 to 135+930 of NH-67).
-
-
-
... More
Hazard Markers
55
4000
220000
... More
Providing and fixing of Retro - Reflectorised Cautionary, Mandatory and Informatory signs (without definition board) made out of High Intensity Prismatic Grade Sheeting confirming to Type-XI standards of IRC-67: 2022 and ASTM D 4956 –09, specification and fixed over 2mm thick Aluminium sheeting vide clause 801.3, 3mm/4mm thick Aluminum composite material sheet depending on the size of the sign fixed over a back supporting frame of 25mm x 25mmx3mm Mild Steel angle and supported on a mild steel angle post 75X75X6mm with a clear height of not less than 2.10m from the ground level to the bottom of the sign board and 0.60m below ground level. The sign post should be painted as per IRC 67-2022 and firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45cmX45cmX60cm size including cost and conveyance of all materials, equipment, Machinery and labour with all leads and lifts, loading charges necessary for satisfactory completion of the work as directed by the engineer-in-charge. High intensity Retro - Reflectro sheet shall consist of minimum coefficient of Retro-reflection as per Table 6.9 of IRC 67-2022. The retro - reflective sheeting shall be covered under 7 year warranty issued for field performance and a certified copy of three years outdoor exposure report shall be obtained as per IRC 67:2022 . ( as per MoRT&H Specification No.801).
-
-
-
... More
120 cm Circular
26
12534
325897
... More
120 cm Equilateral Triangle
84
8278
695387
... More
120 cm high Octagon
8
13092
104743
... More
Chevron 90 cm x 75 cm Rectangular
108
8709
940675
... More
Proving and fixing Solar powered Traffic Blinkers of 30cm dia with Polycarbonate Dome 5mm Red of Led 150 Nos. iri each Red Blinkers Light - 1 No. with Red / White / Blue Led Blinkers Delineator Solar Panel : 12v 50w Solar Panel — 1 No. 12v 18 AH Battery - 1 No. with Box, Solar Circuit Controller Board Box. Straight Pole : MS Pole 3” dia 2.5mm thick 18 Feet height pole (1 No.) with 2 Feet under ground pole foundation, pole painting including transportation charges, installation charges etc., complete as per standard specification. The warranty so provided by supplier will be in the name of NHAI. (From Km 10+000 to 91+054 of Old NH-210 including Trichy bypass 110+016 to 135+930 of NH-67).
-
-
-
... More
Solar blinkers
24
25000
600000
... More
Providing and erecting Single sided Single Guard Metal Beam Crash Barrier System (Type - A, “W” Single Guard)1.80m high, comprising of 3mm thick wall “W” beams posts and spacer channels shall be made by cold roll forming using HR conform to IS 5986 Fe 410/360 and dip galvanized having Zinc Mass of 550gms/ sqm, minimum 700 mm above road/ ground level fixed on ISMC series channel vertical post 150x75x5mm spaced 2m center to center 312mm x 83mm flange width x 3mm thick, 4318mm long post directly embedded in the concrete (M15) pit size 350x350x800mm for a depth of 1100mm below ground. All fixing bolts and nuts hot dip galvanized conforming to IS:1367 clause 4.60 all complete as per Technical Specification of IRC 119 2015 and as directed by the Engineer-in-charge.
-
-
-
... More
MBCB Km.89+140 - 89+340 LHS Km.89+200 to 89+300 (RHS)
300
4696
1408800
... More
Providing and fixing of missing Space Channels, Vertical posts & Beams in MBCBs
-
-
-
... More
Spacer channels 150x75x5mm shall be made by cold roll forming using HR conform to IS 5986 Fe 410/360 and dip glavanized having Zinc Mass of 550gms/ sqm, minimum 95mm above road / ground level fixed on ISMC series channel vertical post. All fixing bolts and nuts hot dip glavanized conforming to IS:1367 clause 4.60 all complete as per Technical specification and as directed by the Engineer- in-charge.
742
649
481558
... More
Vertical Post 150 x 75 x 5mm channel 1.80 m Height, 3 Nos @ 16.4 kg Per meter shall be made by cold roll forming using HR conform to IS 5986 Fe 410/360 and dip glavanized having Zinc Mass of 550gms/ sqm, minimum 95mm above road/ground level fixed on ISMC series channel vertical post 150x75x5mm spaced 2m center to center 312mm x 83mm flange width x 3mm thick,4318mm long post directly embedded in pit size 350x350x800mm for a depth of 1100mm below ground as per Technical specification and as directed by the Engineer- in-charge.
50
2693
134650
... More
Glavanized Corrugated sheet,3mm thick, "W" beam section railing ,4.5 m in length shall be made by cold roll forming using HR conform to IS 5986 Fe 410/360 and dip glavanized having Zinc Mass of 550gms/ sqm, minimum 95mm above road / ground level fixed on ISMC series channel as per Technical specification and as directed by the Engineer- in-charge.
50
1354
67700
... More
Earthern shoulder
-
-
-
... More
Construction of earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2
111324.29
227
25270614
... More
Replacement of damaged or missing Guard Stone
-
-
-
... More
Replacing and fixing RCC Guard stone including cost of reinforcement and two coats of painting with ready mix oil bound paint complete as per drawing and As per MoRT&H Specifications Clause 807.
165
2688
443619
... More
Existing Guard Stone Painting
-
-
-
... More
Painting two coats with approved quality enamel paint on existing Guard Stone complete in all respects conforming to respective IRC/MoRTH Specifications and as directed by Engineer.
325.6
122
39723
... More
Providing and laying of hot applied Thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform and free from streaks and holes etc., complete as per MoRT&H specification No.803.
4308.4
890
3834476
... More
Providing and fixing reflective road studs of ‘category A’ Raised pavement markers made out of poly carbonate / methyl methercrylate/ABS moulded body confirming to ASTM D788 and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face with retro reflectance and chromaticity values conforming to ASTM D4280. The reflective raised pavement markers shall also confirm to the MORTH circular No RW / NH. 33023/10/ 97-DO.III dt 11.06.97. The height, width and length shall not be less than 15 mm, 90 mm and 100 mm and with minimum reflective area of 13 Sq.cm on each side and the slope to the base shall be 35 +/- 5 degree. Each reflector shall have a CIL not less than values specified in Table 2 of said MORTH circular. The strength of detachment of the integrated cylindrical shanks, (of diameter not less than 19 +/- 2mm and height not less than 30+/- 2 mm) from the body is to be a minimum value of 500 Kgf. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive as per manufacturer’s recommendation and complete as directed by the engineer. The marker shall support a load of 13635 Kg tested in accordance with ASTM D4280 and confirming to IRC 35 - 2015 guidelines and MoRT&H specification 804 etc., complete
1450
480
696000
... More
Incident Management
-
-
-
... More
Removing all types of broken down/vehicles which have met with accidents from the carriageway and toeing the same from the carriageway to proper locations I.e. nearest police station or some suitable location by using 20 tonnes or more capacity pick and carry crane as per IRC: SP: 73-2018 Clause 12.13 and as per performace standard & scope of work. It shall also be fitted with a GPS based vehicle tracking system to monitor its movement on 24 hrs. x 7 days of a week basis. Also submission of accident/breakdown reports and photos.
-
-
-
... More
Lembalkudi toll plaza and Lechuchmanapatti Toll plaza Km.19+000 BHS ,Km.57+250 BHS of Trichy to Karaikudi NH-210 (2 nos of the Crane)
24
166782
4002768
... More
Providing by route patrol vehicle as per IRC: SP: 73-2018, Clause 12.11 and NHAI/Policy Guidelines/Strengthening the incident Management services/2018 Policy No.12.19, Dated the 20th march 2018 and also as per other applicable clause in agreement. The patrol shall promptly clear the road of any obstruction, removal of dead animals from highway. It shall also be fitted with GPS based vehicle tracking system to monitor its movement on 24hrsx7days of a weekly basis. vechicle shall be enough space to carry essential traffic and incidence management and safety tools.
-
-
-
... More
Lembalkudi toll plaza and Lechuchmanapatti Toll plaza Km.19+000 BHS ,Km.57+250 BHS of Trichy to Karaikudi NH-210
24
144957
3478968
... More
Grand total
-
-
123583557
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%