National Highways Authority Of India Tender
Search from a plethora of business opportunities for Tamil Nadu tenders posted on the eProcurement TamilNadu website and other online and offline sources. Here, on BidAssist, you can find the best tender opportunities to boost your enterprise by finding work in Tamil Nadu government tenders, PSUs, Municipal Corporations and more. Read on to learn about the bidder registration process, DSC and more.
National Highways Authority Of India - NHAI Tender
Civil And Construction
Road Construction
Eprocure
Opening Date16 Oct 2024
Closing Date23 Oct 2024
Tender Amount₹ 1,40,29,845
Costs
EMD
₹ 2,81,000Document Cost
₹ 25,000Tender Fee
Refer Documents
Summary
Short Term Measures For Rectification Of 16 Nos Of Hot Spots Madurai To Chettikulam Section Of Nh785 2nd Call
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_NHAI_207708_2Bid Award Id
ViewTender No
NHAI/PIU/MDU/NH785/MC/HS/2024Tender Authority
National Highways Authority Of India ViewPurchaser Address
-Website
http://https://nhai.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Construction of Median and Island with Soil Taken from Borrow Areas (Construction of median and Island above road level with approved material brought from borrow pits, spread, sloped and compacted as per clause 408)
4.95
767
3798
Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous/granular surface cleaned with mechanical broom. - Tack Coat on Granular surfaces treated with primer
125.8
14
1778
Dense Graded Bituminous Macadam-II (Providing and laying dense graded bituminous macadam with higher capacity batch type HMP using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 505 complete in all respects.) (50-75 mm)
8.56
9688
82927
Construction of cement concrete kerb with top and bottom width 115 and 165 mm respectively, 250 mm high in M 20 grade PCC on M-10 grade foundation 150 mm thick, foundation having 50 mm projection beyond kerb stone, kerb stone laid with kerb laying machine, foundation concrete laid manually, all complete as per clause 408
26
501
13026
Painting Two Coats on New Concrete Surfaces (Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces)
9.49
128
1215
Providing and laying of hot applied Thermoplastic compound 2.5mm thick including reflectorizing glass beads @ 250gms per sqm area, thickness of 2.5mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform and free from streaks and holes etc complete as per MoRT&H Specification No.803 (Road marking)
292.88
673
197108
Providing and erecting of Retro-Reflectorized Cautionary, Mandatory and Informatory signs (with definition board) made out of High Intensity Prismatic Grade Sheeting confirming to Type-XI standards of IRC-67:2012 and ASTM D 4956-09, specification and fixed over 2mm thick Aluminium sheet fixed over a back supporting frame of 25mm x 25mm x 3mm Mild Steel angle and supported on a mild steel angle post 75x75x6mm with a clear height of not less than 2.10m from the ground level to the bottom of the sign board and 0.60m below ground level The sign post should be painted as per IRC-67:2012 and firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45cm x 45cm x 60cm size including cost and conveyance of all materials, equipment, Machinery and labour with all leads and lifts, loading charges necessary for satisfactory completion of the work as directed by the engineer in charge. High intensity Retro-Reflectro sheet shall consist of minimum coefficient of Retro-Reflection as per Table 6.6 of IRC-67:2012. The retro-reflective sheeting shall be covered under 7 year warranty issued for field performance and a certified copy of three years outdoor exposure report shall be obtained as per IRC-67:2012 (as per MoRT&H Specification No.801)
-
-
-
(i) 900mm Equilateral triangular - Road Hump Ahead
4
5126
20504
Providing and fixing reflective road studs of 'Category A' Raised pavement markers made out of poly carbonate / methyl methacrylate / ABS moulded body confirming to ASTM D 788 and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face with retro reflectance and chromaticity values confirming to ASTM D4280. The reflective raised pavement markers shall also confirm to the MoRTH circular No RW/NH.33023/10/97-DO.III dt. 11.06.97. The height, width and length shall not be less than 15mm, 90mm and 100mm and with minimum reflective area of 13 Sq.cm on each side and the slope to the base shall be 35 + / - 5 degree. Each reflector shall have a CIL not less than values specified in Table 2 of said MoRTH circular. The strength of detachment of the integrated cylindrical shanks, (of diameter not less than 19 + / - 2mm and height not less than 30 + / - 2mm) from the body is to be a minimum value of 500 Kgf. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive as per manufacturer's recommendation and complete as directed by the engineer. The marker shall support a load of 13635 Kg tested in accordance with ASTM D4280 and confirming to IRC:35-2015 guidelines and MoRT&H specification 804 etc., CompleteRoad (studs)
151
480
72480
Providing fixing of Median marker double sided made of polycarbonate for impact resistance and good weather ability. Polycarbonate used for molding the median marker shall have a minimum Izod impact strength value of 600 J/m at room temperature. The impact strength of the poly carbonate should not decrease to less than 70% of its initial value on being subjected to UV weathering as per ASTM G 155 for 1000 hours or exposure to 2 years of natural weathering. The body of the median marker shall be in the form of an isosceles trapezoidal structure of length 15 cm height and width of 10 x 10 cm. The median marker shall have fluorescent yellow retro reflective sheeting confirming to Tpe XI specifications as per ASTM D 4956.Area of reflective sheeting should not be less than 70 cm2 Edge of retro reflective shall be concealed using a grill/mesh/similar mechanism to prevent vandalism and sheeting pilferage. The logo of the manufacturer shall be embossed and painted in contrasting colour on both side of median marker for distinct identification.
20
470
9400
pedestrian guard rail
26
4851
126126
Supplying of Solar Raised Pavement Markers made of polycarbonate molded body, solar powered, LED self- illumination in active mode, 360 degree illumination and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face in passive mode. The product shall support a load of 13635 kg tested in accordance to MORTH and ASTM D 4280 Type H. The product should be resistant water ingress according to IP 65 standards with IS 12063:1987 Category 2 and should withstand temperatures to in the range of -7 C to 70 C. Flashing rate and color of lighting is to be provided as per requirement. There should be minimum current losses of less than 20 micro-amperes in sleep-charging mode to enhance product life and single charge should provide for a minimum autonomy of 50 hours. The height, width and length shall not be less than 10 mm x 100 mm x 100 mm. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive as per manufacturer's recommendation and complete as directed by the engineer. Warranty Certificate and test reports confirming to compressive strength as per MORTH circular shall be obtained from the manufacturer and submitted to the engineer in charge. Two Years Warranty Certificate for Solar RPM for the quantity installed and a certified copy of test reports from an independent test laboratory conforming to water ingress shall be obtained from the Manufacturer by the contractor and submitted to the engineer-in-charge.
60
3300
198000
Solar Blinkers - Blinking Variable Signal 300mm light Red or Amber Bib X Model Light (Blue, White & Red)L Pole Bi 5'', Height 25 Feet, L Model Top 9 Feet Yellow Coating Solar Panel, 150W Solar Charge Controller/ Battery Box / Maintenance free Battery 12V 60-100Ah Lithium Battery and as per instructions by NHAI
2
30000
60000
Supply and installation of Solar LED Blinking Variable Signal light of 300mm dia Polycarbonate housing with IP65 Protection. X Model Light of Red or Amber Bib, (Blue, White & Red), 3 Blinkers on top and 1 on Vertical Pipe. The Pole shall be L Type Cantilever design bade of 5’’ Gi Pipe with Yellow Coating, Height 25 Feet, L Model Top 9 Feet length. The power Shall be generated using 150-165Wp Solar Panel and stored in Maintenance free Battery 12V 60Ah Lithium attery. The cost shall include Solar Charge Controller, Battery Box and the solar panel shall be mounted separately on crash barrier with proper framing as required.
2
39500
79000
Total Amount (Rs.)
-
-
867686
Description
-
-
-
Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous/granular surface cleaned with mechanical broom. - Tack Coat on Granular surfaces treated with primer
27.75
14
392
Dense Graded Bituminous Macadam-II (Providing and laying dense graded bituminous macadam with higher capacity batch type HMP using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 505 complete in all respects.) (50-75 mm)
1.85
9688
17924
Providing and laying of hot applied Thermoplastic compound 2.5mm thick including reflectorizing glass beads @ 250gms per sqm area, thickness of 2.5mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform and free from streaks and holes etc complete as per MoRT&H Specification No.803 (Road marking)
270.49
673
182040
Providing and erecting of Retro-Reflectorized Cautionary, Mandatory and Informatory signs (with definition board) made out of High Intensity Prismatic Grade Sheeting confirming to Type-XI standards of IRC-67:2012 and ASTM D 4956-09, specification and fixed over 2mm thick Aluminium sheet fixed over a back supporting frame of 25mm x 25mm x 3mm Mild Steel angle and supported on a mild steel angle post 75x75x6mm with a clear height of not less than 2.10m from the ground level to the bottom of the sign board and 0.60m below ground level The sign post should be painted as per IRC-67:2012 and firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45cm x 45cm x 60cm size including cost and conveyance of all materials, equipment, Machinery and labour with all leads and lifts, loading charges necessary for satisfactory completion of the work as directed by the engineer in charge. High intensity Retro-Reflectro sheet shall consist of minimum coefficient of Retro-Reflection as per Table 6.6 of IRC-67:2012. The retro-reflective sheeting shall be covered under 7 year warranty issued for field performance and a certified copy of three years outdoor exposure report shall be obtained as per IRC-67:2012 (as per MoRT&H Specification No.801)
-
-
-
(i) 900mm Equilateral triangular - Road Hump Ahead
1
5126
5126
Providing and fixing reflective road studs of 'Category A' Raised pavement markers made out of poly carbonate / methyl methacrylate / ABS moulded body confirming to ASTM D 788 and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face with retro reflectance and chromaticity values confirming to ASTM D4280. The reflective raised pavement markers shall also confirm to the MoRTH circular No RW/NH.33023/10/97-DO.III dt. 11.06.97. The height, width and length shall not be less than 15mm, 90mm and 100mm and with minimum reflective area of 13 Sq.cm on each side and the slope to the base shall be 35 + / - 5 degree. Each reflector shall have a CIL not less than values specified in Table 2 of said MoRTH circular. The strength of detachment of the integrated cylindrical shanks, (of diameter not less than 19 + / - 2mm and height not less than 30 + / - 2mm) from the body is to be a minimum value of 500 Kgf. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive as per manufacturer's recommendation and complete as directed by the engineer. The marker shall support a load of 13635 Kg tested in accordance with ASTM D4280 and confirming to IRC:35-2015 guidelines and MoRT&H specification 804 etc., CompleteRoad (studs)
32
480
15360
Supplying of Solar Raised Pavement Markers made of polycarbonate molded body, solar powered, LED self- illumination in active mode, 360 degree illumination and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face in passive mode. The product shall support a load of 13635 kg tested in accordance to MORTH and ASTM D 4280 Type H. The product should be resistant water ingress according to IP 65 standards with IS 12063:1987 Category 2 and should withstand temperatures to in the range of -7 C to 70 C. Flashing rate and color of lighting is to be provided as per requirement. There should be minimum current losses of less than 20 micro-amperes in sleep-charging mode to enhance product life and single charge should provide for a minimum autonomy of 50 hours. The height, width and length shall not be less than 10 mm x 100 mm x 100 mm. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive as per manufacturer's recommendation and complete as directed by the engineer. Warranty Certificate and test reports confirming to compressive strength as per MORTH circular shall be obtained from the manufacturer and submitted to the engineer in charge. Two Years Warranty Certificate for Solar RPM for the quantity installed and a certified copy of test reports from an independent test laboratory conforming to water ingress shall be obtained from the Manufacturer by the contractor and submitted to the engineer-in-charge.
80
3300
264000
Supply and installation of Solar LED Blinking Variable Signal light of 300mm dia Polycarbonate housing with IP65 Protection. X Model Light of Red or Amber Bib, (Blue, White & Red), 3 Blinkers on top and 1 on Vertical Pipe. The Pole shall be L Type Cantilever design bade of 5’’ Gi Pipe with Yellow Coating, Height 25 Feet, L Model Top 9 Feet length. The power Shall be generated using 150-165Wp Solar Panel and stored in Maintenance free Battery 12V 60Ah Lithium attery. The cost shall include Solar Charge Controller, Battery Box and the solar panel shall be mounted separately on crash barrier with proper framing as required.
2
39500
79000
Total Amount (Rs.)
-
-
563842
Description
-
-
-
Providing and laying of hot applied Thermoplastic compound 2.5mm thick including reflectorizing glass beads @ 250gms per sqm area, thickness of 2.5mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform and free from streaks and holes etc complete as per MoRT&H Specification No.803 (Road marking)
270
673
181710
Supplying of Solar Raised Pavement Markers made of polycarbonate molded body, solar powered, LED self- illumination in active mode, 360 degree illumination and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face in passive mode. The product shall support a load of 13635 kg tested in accordance to MORTH and ASTM D 4280 Type H. The product should be resistant water ingress according to IP 65 standards with IS 12063:1987 Category 2 and should withstand temperatures to in the range of -7 C to 70 C. Flashing rate and color of lighting is to be provided as per requirement. There should be minimum current losses of less than 20 micro-amperes in sleep-charging mode to enhance product life and single charge should provide for a minimum autonomy of 50 hours. The height, width and length shall not be less than 10 mm x 100 mm x 100 mm. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive as per manufacturer's recommendation and complete as directed by the engineer. Warranty Certificate and test reports confirming to compressive strength as per MORTH circular shall be obtained from the manufacturer and submitted to the engineer in charge. Two Years Warranty Certificate for Solar RPM for the quantity installed and a certified copy of test reports from an independent test laboratory conforming to water ingress shall be obtained from the Manufacturer by the contractor and submitted to the engineer-in-charge.
80
3300
264000
Supply and installation of Solar LED Blinking Variable Signal light of 300mm dia Polycarbonate housing with IP65 Protection. X Model Light of Red or Amber Bib, (Blue, White & Red), 3 Blinkers on top and 1 on Vertical Pipe. The Pole shall be L Type Cantilever design bade of 5’’ Gi Pipe with Yellow Coating, Height 25 Feet, L Model Top 9 Feet length. The power Shall be generated using 150-165Wp Solar Panel and stored in Maintenance free Battery 12V 60Ah Lithium attery. The cost shall include Solar Charge Controller, Battery Box and the solar panel shall be mounted separately on crash barrier with proper framing as required.
2
39500
79000
Total Amount (Rs.)
-
-
524710
Description
-
-
-
Dismantling of Flexible Pavements (Dismantling of flexible pavements and disposal of dismantled materials up to a lead of 1000 metres, stacking serviceable and unserviceable materials separately) (Bituminous course)
2.93
708
2071
Dismantling of Flexible Pavements (Dismantling of flexible pavements and disposal of dismantled materials up to a lead of 1000 metres, stacking serviceable and unserviceable materials separately) (Granular courses)
3.25
108
354
Dismantling Kerb Stone channel (Dismantling kerb stone channel by manual means and disposal of dismantled material with all lifts and up to a lead of 1000 metre)
2
42
86
Construction of Median and Island with Soil Taken from Borrow Areas (Construction of median and Island above road level with approved material brought from borrow pits, spread, sloped and compacted as per clause 408)
5.36
767
4115
Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous/granular surface cleaned with mechanical broom. - Tack Coat on Granular surfaces treated with primer
92.5
14
1307
Dense Graded Bituminous Macadam-II (Providing and laying dense graded bituminous macadam with higher capacity batch type HMP using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 505 complete in all respects.) (50-75 mm)
6.34
9688
61418
Construction of cement concrete kerb with top and bottom width 115 and 165 mm respectively, 250 mm high in M 20 grade PCC on M-10 grade foundation 150 mm thick, foundation having 50 mm projection beyond kerb stone, kerb stone laid with kerb laying machine, foundation concrete laid manually, all complete as per clause 408
26
501
13026
Painting Two Coats on New Concrete Surfaces (Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces)
9.49
128
1215
Providing and laying of hot applied Thermoplastic compound 2.5mm thick including reflectorizing glass beads @ 250gms per sqm area, thickness of 2.5mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform and free from streaks and holes etc complete as per MoRT&H Specification No.803 (Road marking)
226.68
673
152556
Providing and erecting of Retro-Reflectorized Cautionary, Mandatory and Informatory signs (with definition board) made out of High Intensity Prismatic Grade Sheeting confirming to Type-XI standards of IRC-67:2012 and ASTM D 4956-09, specification and fixed over 2mm thick Aluminium sheet fixed over a back supporting frame of 25mm x 25mm x 3mm Mild Steel angle and supported on a mild steel angle post 75x75x6mm with a clear height of not less than 2.10m from the ground level to the bottom of the sign board and 0.60m below ground level The sign post should be painted as per IRC-67:2012 and firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45cm x 45cm x 60cm size including cost and conveyance of all materials, equipment, Machinery and labour with all leads and lifts, loading charges necessary for satisfactory completion of the work as directed by the engineer in charge. High intensity Retro-Reflectro sheet shall consist of minimum coefficient of Retro-Reflection as per Table 6.6 of IRC-67:2012. The retro-reflective sheeting shall be covered under 7 year warranty issued for field performance and a certified copy of three years outdoor exposure report shall be obtained as per IRC-67:2012 (as per MoRT&H Specification No.801)
-
-
-
(i) 900mm Equilateral triangular - Road Hump Ahead
4
5126
20504
Providing and fixing reflective road studs of 'Category A' Raised pavement markers made out of poly carbonate / methyl methacrylate / ABS moulded body confirming to ASTM D 788 and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face with retro reflectance and chromaticity values confirming to ASTM D4280. The reflective raised pavement markers shall also confirm to the MoRTH circular No RW/NH.33023/10/97-DO.III dt. 11.06.97. The height, width and length shall not be less than 15mm, 90mm and 100mm and with minimum reflective area of 13 Sq.cm on each side and the slope to the base shall be 35 + / - 5 degree. Each reflector shall have a CIL not less than values specified in Table 2 of said MoRTH circular. The strength of detachment of the integrated cylindrical shanks, (of diameter not less than 19 + / - 2mm and height not less than 30 + / - 2mm) from the body is to be a minimum value of 500 Kgf. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive as per manufacturer's recommendation and complete as directed by the engineer. The marker shall support a load of 13635 Kg tested in accordance with ASTM D4280 and confirming to IRC:35-2015 guidelines and MoRT&H specification 804 etc., CompleteRoad (studs)
115
480
55200
Providing fixing of Median marker double sided made of polycarbonate for impact resistance and good weather ability. Polycarbonate used for molding the median marker shall have a minimum Izod impact strength value of 600 J/m at room temperature. The impact strength of the poly carbonate should not decrease to less than 70% of its initial value on being subjected to UV weathering as per ASTM G 155 for 1000 hours or exposure to 2 years of natural weathering. The body of the median marker shall be in the form of an isosceles trapezoidal structure of length 15 cm height and width of 10 x 10 cm. The median marker shall have fluorescent yellow retro reflective sheeting confirming to Tpe XI specifications as per ASTM D 4956.Area of reflective sheeting should not be less than 70 cm2 Edge of retro reflective shall be concealed using a grill/mesh/similar mechanism to prevent vandalism and sheeting pilferage. The logo of the manufacturer shall be embossed and painted in contrasting colour on both side of median marker for distinct identification.
20
470
9400
pedestrian guard rail
26
4851
126126
Supplying of Solar Raised Pavement Markers made of polycarbonate molded body, solar powered, LED self- illumination in active mode, 360 degree illumination and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face in passive mode. The product shall support a load of 13635 kg tested in accordance to MORTH and ASTM D 4280 Type H. The product should be resistant water ingress according to IP 65 standards with IS 12063:1987 Category 2 and should withstand temperatures to in the range of -7 C to 70 C. Flashing rate and color of lighting is to be provided as per requirement. There should be minimum current losses of less than 20 micro-amperes in sleep-charging mode to enhance product life and single charge should provide for a minimum autonomy of 50 hours. The height, width and length shall not be less than 10 mm x 100 mm x 100 mm. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive as per manufacturer's recommendation and complete as directed by the engineer. Warranty Certificate and test reports confirming to compressive strength as per MORTH circular shall be obtained from the manufacturer and submitted to the engineer in charge. Two Years Warranty Certificate for Solar RPM for the quantity installed and a certified copy of test reports from an independent test laboratory conforming to water ingress shall be obtained from the Manufacturer by the contractor and submitted to the engineer-in-charge.
80
3300
264000
Solar Blinkers - Blinking Variable Signal 300mm light Red or Amber Bib X Model Light (Blue, White & Red)L Pole Bi 5'', Height 25 Feet, L Model Top 9 Feet Yellow Coating Solar Panel, 150W Solar Charge Controller/ Battery Box / Maintenance free Battery 12V 60-100Ah Lithium Battery and as per instructions by NHAI
2
30000
60000
Supply and installation of Solar LED Blinking Variable Signal light of 300mm dia Polycarbonate housing with IP65 Protection. X Model Light of Red or Amber Bib, (Blue, White & Red), 3 Blinkers on top and 1 on Vertical Pipe. The Pole shall be L Type Cantilever design bade of 5’’ Gi Pipe with Yellow Coating, Height 25 Feet, L Model Top 9 Feet length. The power Shall be generated using 150-165Wp Solar Panel and stored in Maintenance free Battery 12V 60Ah Lithium attery. The cost shall include Solar Charge Controller, Battery Box and the solar panel shall be mounted separately on crash barrier with proper framing as required.
2
39500
79000
Total Amount (Rs.)
-
-
850378
Description
-
-
-
Dismantling of Flexible Pavements (Dismantling of flexible pavements and disposal of dismantled materials up to a lead of 1000 metres, stacking serviceable and unserviceable materials separately) (Bituminous course)
2.25
708
1593
Dismantling of Flexible Pavements (Dismantling of flexible pavements and disposal of dismantled materials up to a lead of 1000 metres, stacking serviceable and unserviceable materials separately) (Granular courses)
2.5
108
272
Dismantling Kerb Stone channel (Dismantling kerb stone channel by manual means and disposal of dismantled material with all lifts and up to a lead of 1000 metre)
2
42
86
Construction of Median and Island with Soil Taken from Borrow Areas (Construction of median and Island above road level with approved material brought from borrow pits, spread, sloped and compacted as per clause 408)
4.12
767
3165
Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous/granular surface cleaned with mechanical broom. - Tack Coat on Granular surfaces treated with primer
83.25
14
1176
Dense Graded Bituminous Macadam-II (Providing and laying dense graded bituminous macadam with higher capacity batch type HMP using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 505 complete in all respects.) (50-75 mm)
5.55
9688
53771
Construction of cement concrete kerb with top and bottom width 115 and 165 mm respectively, 250 mm high in M 20 grade PCC on M-10 grade foundation 150 mm thick, foundation having 50 mm projection beyond kerb stone, kerb stone laid with kerb laying machine, foundation concrete laid manually, all complete as per clause 408
20
501
10020
Painting Two Coats on New Concrete Surfaces (Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces)
7.3
128
934
Providing and laying of hot applied Thermoplastic compound 2.5mm thick including reflectorizing glass beads @ 250gms per sqm area, thickness of 2.5mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform and free from streaks and holes etc complete as per MoRT&H Specification No.803 (Road marking)
295.71
673
199013
Providing and erecting of Retro-Reflectorized Cautionary, Mandatory and Informatory signs (with definition board) made out of High Intensity Prismatic Grade Sheeting confirming to Type-XI standards of IRC-67:2012 and ASTM D 4956-09, specification and fixed over 2mm thick Aluminium sheet fixed over a back supporting frame of 25mm x 25mm x 3mm Mild Steel angle and supported on a mild steel angle post 75x75x6mm with a clear height of not less than 2.10m from the ground level to the bottom of the sign board and 0.60m below ground level The sign post should be painted as per IRC-67:2012 and firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45cm x 45cm x 60cm size including cost and conveyance of all materials, equipment, Machinery and labour with all leads and lifts, loading charges necessary for satisfactory completion of the work as directed by the engineer in charge. High intensity Retro-Reflectro sheet shall consist of minimum coefficient of Retro-Reflection as per Table 6.6 of IRC-67:2012. The retro-reflective sheeting shall be covered under 7 year warranty issued for field performance and a certified copy of three years outdoor exposure report shall be obtained as per IRC-67:2012 (as per MoRT&H Specification No.801)
-
-
-
(i) 900mm Equilateral triangular - Road Hump Ahead
4
5126
20504
Providing and fixing reflective road studs of 'Category A' Raised pavement markers made out of poly carbonate / methyl methacrylate / ABS moulded body confirming to ASTM D 788 and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face with retro reflectance and chromaticity values confirming to ASTM D4280. The reflective raised pavement markers shall also confirm to the MoRTH circular No RW/NH.33023/10/97-DO.III dt. 11.06.97. The height, width and length shall not be less than 15mm, 90mm and 100mm and with minimum reflective area of 13 Sq.cm on each side and the slope to the base shall be 35 + / - 5 degree. Each reflector shall have a CIL not less than values specified in Table 2 of said MoRTH circular. The strength of detachment of the integrated cylindrical shanks, (of diameter not less than 19 + / - 2mm and height not less than 30 + / - 2mm) from the body is to be a minimum value of 500 Kgf. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive as per manufacturer's recommendation and complete as directed by the engineer. The marker shall support a load of 13635 Kg tested in accordance with ASTM D4280 and confirming to IRC:35-2015 guidelines and MoRT&H specification 804 etc., CompleteRoad (studs)
105
480
50400
Providing fixing of Median marker double sided made of polycarbonate for impact resistance and good weather ability. Polycarbonate used for molding the median marker shall have a minimum Izod impact strength value of 600 J/m at room temperature. The impact strength of the poly carbonate should not decrease to less than 70% of its initial value on being subjected to UV weathering as per ASTM G 155 for 1000 hours or exposure to 2 years of natural weathering. The body of the median marker shall be in the form of an isosceles trapezoidal structure of length 15 cm height and width of 10 x 10 cm. The median marker shall have fluorescent yellow retro reflective sheeting confirming to Tpe XI specifications as per ASTM D 4956.Area of reflective sheeting should not be less than 70 cm2 Edge of retro reflective shall be concealed using a grill/mesh/similar mechanism to prevent vandalism and sheeting pilferage. The logo of the manufacturer shall be embossed and painted in contrasting colour on both side of median marker for distinct identification.
20
470
9400
pedestrian guard rail
20
4851
97020
Supplying of Solar Raised Pavement Markers made of polycarbonate molded body, solar powered, LED self- illumination in active mode, 360 degree illumination and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face in passive mode. The product shall support a load of 13635 kg tested in accordance to MORTH and ASTM D 4280 Type H. The product should be resistant water ingress according to IP 65 standards with IS 12063:1987 Category 2 and should withstand temperatures to in the range of -7 C to 70 C. Flashing rate and color of lighting is to be provided as per requirement. There should be minimum current losses of less than 20 micro-amperes in sleep-charging mode to enhance product life and single charge should provide for a minimum autonomy of 50 hours. The height, width and length shall not be less than 10 mm x 100 mm x 100 mm. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive as per manufacturer's recommendation and complete as directed by the engineer. Warranty Certificate and test reports confirming to compressive strength as per MORTH circular shall be obtained from the manufacturer and submitted to the engineer in charge. Two Years Warranty Certificate for Solar RPM for the quantity installed and a certified copy of test reports from an independent test laboratory conforming to water ingress shall be obtained from the Manufacturer by the contractor and submitted to the engineer-in-charge.
60
3300
198000
Supply and installation of Solar LED Blinking Variable Signal light of 300mm dia Polycarbonate housing with IP65 Protection. X Model Light of Red or Amber Bib, (Blue, White & Red), 3 Blinkers on top and 1 on Vertical Pipe. The Pole shall be L Type Cantilever design bade of 5’’ Gi Pipe with Yellow Coating, Height 25 Feet, L Model Top 9 Feet length. The power Shall be generated using 150-165Wp Solar Panel and stored in Maintenance free Battery 12V 60Ah Lithium attery. The cost shall include Solar Charge Controller, Battery Box and the solar panel shall be mounted separately on crash barrier with proper framing as required.
2
39500
79000
Total Amount (Rs.)
-
-
724354
Description
-
-
-
Providing and erecting of Retro-Reflectorized Cautionary, Mandatory and Informatory signs (with definition board) made out of High Intensity Prismatic Grade Sheeting confirming to Type-XI standards of IRC-67:2012 and ASTM D 4956-09, specification and fixed over 2mm thick Aluminium sheet fixed over a back supporting frame of 25mm x 25mm x 3mm Mild Steel angle and supported on a mild steel angle post 75x75x6mm with a clear height of not less than 2.10m from the ground level to the bottom of the sign board and 0.60m below ground level The sign post should be painted as per IRC-67:2012 and firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45cm x 45cm x 60cm size including cost and conveyance of all materials, equipment, Machinery and labour with all leads and lifts, loading charges necessary for satisfactory completion of the work as directed by the engineer in charge. High intensity Retro-Reflectro sheet shall consist of minimum coefficient of Retro-Reflection as per Table 6.6 of IRC-67:2012. The retro-reflective sheeting shall be covered under 7 year warranty issued for field performance and a certified copy of three years outdoor exposure report shall be obtained as per IRC-67:2012 (as per MoRT&H Specification No.801)
-
-
-
(i) 80cm x 60cm Rectangular - Bus stop Sign Board
2
6349
12698
Supply & Installation of Stainless Steel Bus shelter size of 6Mtr X 2.5Mtr SS304 Grade (As per attached Drawing) including Civil works
2
390000
780000
Supplying of Solar Raised Pavement Markers made of polycarbonate molded body, solar powered, LED self- illumination in active mode, 360 degree illumination and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face in passive mode. The product shall support a load of 13635 kg tested in accordance to MORTH and ASTM D 4280 Type H. The product should be resistant water ingress according to IP 65 standards with IS 12063:1987 Category 2 and should withstand temperatures to in the range of -7 C to 70 C. Flashing rate and color of lighting is to be provided as per requirement. There should be minimum current losses of less than 20 micro-amperes in sleep-charging mode to enhance product life and single charge should provide for a minimum autonomy of 50 hours. The height, width and length shall not be less than 10 mm x 100 mm x 100 mm. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive as per manufacturer's recommendation and complete as directed by the engineer. Warranty Certificate and test reports confirming to compressive strength as per MORTH circular shall be obtained from the manufacturer and submitted to the engineer in charge. Two Years Warranty Certificate for Solar RPM for the quantity installed and a certified copy of test reports from an independent test laboratory conforming to water ingress shall be obtained from the Manufacturer by the contractor and submitted to the engineer-in-charge.
60
3300
198000
Total Amount (Rs.)
-
-
990698
Description
-
-
-
Providing and erecting of Retro-Reflectorized Cautionary, Mandatory and Informatory signs (with definition board) made out of High Intensity Prismatic Grade Sheeting confirming to Type-XI standards of IRC-67:2012 and ASTM D 4956-09, specification and fixed over 2mm thick Aluminium sheet fixed over a back supporting frame of 25mm x 25mm x 3mm Mild Steel angle and supported on a mild steel angle post 75x75x6mm with a clear height of not less than 2.10m from the ground level to the bottom of the sign board and 0.60m below ground level The sign post should be painted as per IRC-67:2012 and firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45cm x 45cm x 60cm size including cost and conveyance of all materials, equipment, Machinery and labour with all leads and lifts, loading charges necessary for satisfactory completion of the work as directed by the engineer in charge. High intensity Retro-Reflectro sheet shall consist of minimum coefficient of Retro-Reflection as per Table 6.6 of IRC-67:2012. The retro-reflective sheeting shall be covered under 7 year warranty issued for field performance and a certified copy of three years outdoor exposure report shall be obtained as per IRC-67:2012 (as per MoRT&H Specification No.801)
-
-
-
(i) 80cm x 60cm Rectangular - Bus stop Sign Board
2
6349
12698
Supply & Installation of Stainless Steel Bus shelter size of 6Mtr X 2.5Mtr SS304 Grade (As per attached Drawing) including Civil works
2
390000
780000
Supplying of Solar Raised Pavement Markers made of polycarbonate molded body, solar powered, LED self- illumination in active mode, 360 degree illumination and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face in passive mode. The product shall support a load of 13635 kg tested in accordance to MORTH and ASTM D 4280 Type H. The product should be resistant water ingress according to IP 65 standards with IS 12063:1987 Category 2 and should withstand temperatures to in the range of -7 C to 70 C. Flashing rate and color of lighting is to be provided as per requirement. There should be minimum current losses of less than 20 micro-amperes in sleep-charging mode to enhance product life and single charge should provide for a minimum autonomy of 50 hours. The height, width and length shall not be less than 10 mm x 100 mm x 100 mm. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive as per manufacturer's recommendation and complete as directed by the engineer. Warranty Certificate and test reports confirming to compressive strength as per MORTH circular shall be obtained from the manufacturer and submitted to the engineer in charge. Two Years Warranty Certificate for Solar RPM for the quantity installed and a certified copy of test reports from an independent test laboratory conforming to water ingress shall be obtained from the Manufacturer by the contractor and submitted to the engineer-in-charge.
60
3300
198000
Total Amount (Rs.)
-
-
990698
Description
-
-
-
Providing and laying of hot applied Thermoplastic compound 2.5mm thick including reflectorizing glass beads @ 250gms per sqm area, thickness of 2.5mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform and free from streaks and holes etc complete as per MoRT&H Specification No.803 (Road marking)
42
673
28266
Providing and erecting of Retro-Reflectorized Cautionary, Mandatory and Informatory signs (with definition board) made out of High Intensity Prismatic Grade Sheeting confirming to Type-XI standards of IRC-67:2012 and ASTM D 4956-09, specification and fixed over 2mm thick Aluminium sheet fixed over a back supporting frame of 25mm x 25mm x 3mm Mild Steel angle and supported on a mild steel angle post 75x75x6mm with a clear height of not less than 2.10m from the ground level to the bottom of the sign board and 0.60m below ground level The sign post should be painted as per IRC-67:2012 and firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45cm x 45cm x 60cm size including cost and conveyance of all materials, equipment, Machinery and labour with all leads and lifts, loading charges necessary for satisfactory completion of the work as directed by the engineer in charge. High intensity Retro-Reflectro sheet shall consist of minimum coefficient of Retro-Reflection as per Table 6.6 of IRC-67:2012. The retro-reflective sheeting shall be covered under 7 year warranty issued for field performance and a certified copy of three years outdoor exposure report shall be obtained as per IRC-67:2012 (as per MoRT&H Specification No.801)
-
-
-
(i) 80cm x 60cm Rectangular - Bus stop Sign Board
2
6349
12698
Providing and fixing reflective road studs of 'Category A' Raised pavement markers made out of poly carbonate / methyl methacrylate / ABS moulded body confirming to ASTM D 788 and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face with retro reflectance and chromaticity values confirming to ASTM D4280. The reflective raised pavement markers shall also confirm to the MoRTH circular No RW/NH.33023/10/97-DO.III dt. 11.06.97. The height, width and length shall not be less than 15mm, 90mm and 100mm and with minimum reflective area of 13 Sq.cm on each side and the slope to the base shall be 35 + / - 5 degree. Each reflector shall have a CIL not less than values specified in Table 2 of said MoRTH circular. The strength of detachment of the integrated cylindrical shanks, (of diameter not less than 19 + / - 2mm and height not less than 30 + / - 2mm) from the body is to be a minimum value of 500 Kgf. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive as per manufacturer's recommendation and complete as directed by the engineer. The marker shall support a load of 13635 Kg tested in accordance with ASTM D4280 and confirming to IRC:35-2015 guidelines and MoRT&H specification 804 etc., CompleteRoad (studs)
112
480
53760
Supply & Installation of Stainless Steel Bus shelter size of 6Mtr X 2.5Mtr SS304 Grade (As per attached Drawing) including Civil works
2
390000
780000
Supplying of Solar Raised Pavement Markers made of polycarbonate molded body, solar powered, LED self- illumination in active mode, 360 degree illumination and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face in passive mode. The product shall support a load of 13635 kg tested in accordance to MORTH and ASTM D 4280 Type H. The product should be resistant water ingress according to IP 65 standards with IS 12063:1987 Category 2 and should withstand temperatures to in the range of -7 C to 70 C. Flashing rate and color of lighting is to be provided as per requirement. There should be minimum current losses of less than 20 micro-amperes in sleep-charging mode to enhance product life and single charge should provide for a minimum autonomy of 50 hours. The height, width and length shall not be less than 10 mm x 100 mm x 100 mm. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive as per manufacturer's recommendation and complete as directed by the engineer. Warranty Certificate and test reports confirming to compressive strength as per MORTH circular shall be obtained from the manufacturer and submitted to the engineer in charge. Two Years Warranty Certificate for Solar RPM for the quantity installed and a certified copy of test reports from an independent test laboratory conforming to water ingress shall be obtained from the Manufacturer by the contractor and submitted to the engineer-in-charge.
10
3300
33000
Supply and installation of Solar LED Blinking Variable Signal light of 300mm dia Polycarbonate housing with IP65 Protection. X Model Light of Red or Amber Bib, (Blue, White & Red), 3 Blinkers on top and 1 on Vertical Pipe. The Pole shall be L Type Cantilever design bade of 5’’ Gi Pipe with Yellow Coating, Height 25 Feet, L Model Top 9 Feet length. The power Shall be generated using 150-165Wp Solar Panel and stored in Maintenance free Battery 12V 60Ah Lithium attery. The cost shall include Solar Charge Controller, Battery Box and the solar panel shall be mounted separately on crash barrier with proper framing as required.
2
39500
79000
Total Amount (Rs.)
-
-
986724
Description
-
-
-
Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous/granular surface cleaned with mechanical broom. - Tack Coat on Granular surfaces treated with primer
72.15
14
1019
Dense Graded Bituminous Macadam-II (Providing and laying dense graded bituminous macadam with higher capacity batch type HMP using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 505 complete in all respects.) (50-75 mm)
4.81
9688
46601
Providing and laying of hot applied Thermoplastic compound 2.5mm thick including reflectorizing glass beads @ 250gms per sqm area, thickness of 2.5mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform and free from streaks and holes etc complete as per MoRT&H Specification No.803 (Road marking)
287.87
673
193737
Providing and erecting of Retro-Reflectorized Cautionary, Mandatory and Informatory signs (with definition board) made out of High Intensity Prismatic Grade Sheeting confirming to Type-XI standards of IRC-67:2012 and ASTM D 4956-09, specification and fixed over 2mm thick Aluminium sheet fixed over a back supporting frame of 25mm x 25mm x 3mm Mild Steel angle and supported on a mild steel angle post 75x75x6mm with a clear height of not less than 2.10m from the ground level to the bottom of the sign board and 0.60m below ground level The sign post should be painted as per IRC-67:2012 and firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45cm x 45cm x 60cm size including cost and conveyance of all materials, equipment, Machinery and labour with all leads and lifts, loading charges necessary for satisfactory completion of the work as directed by the engineer in charge. High intensity Retro-Reflectro sheet shall consist of minimum coefficient of Retro-Reflection as per Table 6.6 of IRC-67:2012. The retro-reflective sheeting shall be covered under 7 year warranty issued for field performance and a certified copy of three years outdoor exposure report shall be obtained as per IRC-67:2012 (as per MoRT&H Specification No.801)
-
-
-
(i) 900mm Equilateral triangular - Road Hump Ahead
3
5126
15378
Providing and fixing reflective road studs of 'Category A' Raised pavement markers made out of poly carbonate / methyl methacrylate / ABS moulded body confirming to ASTM D 788 and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face with retro reflectance and chromaticity values confirming to ASTM D4280. The reflective raised pavement markers shall also confirm to the MoRTH circular No RW/NH.33023/10/97-DO.III dt. 11.06.97. The height, width and length shall not be less than 15mm, 90mm and 100mm and with minimum reflective area of 13 Sq.cm on each side and the slope to the base shall be 35 + / - 5 degree. Each reflector shall have a CIL not less than values specified in Table 2 of said MoRTH circular. The strength of detachment of the integrated cylindrical shanks, (of diameter not less than 19 + / - 2mm and height not less than 30 + / - 2mm) from the body is to be a minimum value of 500 Kgf. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive as per manufacturer's recommendation and complete as directed by the engineer. The marker shall support a load of 13635 Kg tested in accordance with ASTM D4280 and confirming to IRC:35-2015 guidelines and MoRT&H specification 804 etc., CompleteRoad (studs)
80
480
38400
Supplying of Solar Raised Pavement Markers made of polycarbonate molded body, solar powered, LED self- illumination in active mode, 360 degree illumination and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face in passive mode. The product shall support a load of 13635 kg tested in accordance to MORTH and ASTM D 4280 Type H. The product should be resistant water ingress according to IP 65 standards with IS 12063:1987 Category 2 and should withstand temperatures to in the range of -7 C to 70 C. Flashing rate and color of lighting is to be provided as per requirement. There should be minimum current losses of less than 20 micro-amperes in sleep-charging mode to enhance product life and single charge should provide for a minimum autonomy of 50 hours. The height, width and length shall not be less than 10 mm x 100 mm x 100 mm. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive as per manufacturer's recommendation and complete as directed by the engineer. Warranty Certificate and test reports confirming to compressive strength as per MORTH circular shall be obtained from the manufacturer and submitted to the engineer in charge. Two Years Warranty Certificate for Solar RPM for the quantity installed and a certified copy of test reports from an independent test laboratory conforming to water ingress shall be obtained from the Manufacturer by the contractor and submitted to the engineer-in-charge.
80
3300
264000
Supply and installation of Solar LED Blinking Variable Signal light of 300mm dia Polycarbonate housing with IP65 Protection. X Model Light of Red or Amber Bib, (Blue, White & Red), 3 Blinkers on top and 1 on Vertical Pipe. The Pole shall be L Type Cantilever design bade of 5’’ Gi Pipe with Yellow Coating, Height 25 Feet, L Model Top 9 Feet length. The power Shall be generated using 150-165Wp Solar Panel and stored in Maintenance free Battery 12V 60Ah Lithium attery. The cost shall include Solar Charge Controller, Battery Box and the solar panel shall be mounted separately on crash barrier with proper framing as required.
2
39500
79000
Total Amount (Rs.)
-
-
638135
Description
-
-
-
Providing and erecting of Retro-Reflectorized Cautionary, Mandatory and Informatory signs (with definition board) made out of High Intensity Prismatic Grade Sheeting confirming to Type-XI standards of IRC-67:2012 and ASTM D 4956-09, specification and fixed over 2mm thick Aluminium sheet fixed over a back supporting frame of 25mm x 25mm x 3mm Mild Steel angle and supported on a mild steel angle post 75x75x6mm with a clear height of not less than 2.10m from the ground level to the bottom of the sign board and 0.60m below ground level The sign post should be painted as per IRC-67:2012 and firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45cm x 45cm x 60cm size including cost and conveyance of all materials, equipment, Machinery and labour with all leads and lifts, loading charges necessary for satisfactory completion of the work as directed by the engineer in charge. High intensity Retro-Reflectro sheet shall consist of minimum coefficient of Retro-Reflection as per Table 6.6 of IRC-67:2012. The retro-reflective sheeting shall be covered under 7 year warranty issued for field performance and a certified copy of three years outdoor exposure report shall be obtained as per IRC-67:2012 (as per MoRT&H Specification No.801)
-
-
-
(i) 80cm x 60cm Rectangular - Bus stop Sign Board
2
6349
12698
Supply & Installation of Stainless Steel Bus shelter size of 6Mtr X 2.5Mtr SS304 Grade (As per attached Drawing) including Civil works
2
390000
780000
Supplying of Solar Raised Pavement Markers made of polycarbonate molded body, solar powered, LED self- illumination in active mode, 360 degree illumination and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face in passive mode. The product shall support a load of 13635 kg tested in accordance to MORTH and ASTM D 4280 Type H. The product should be resistant water ingress according to IP 65 standards with IS 12063:1987 Category 2 and should withstand temperatures to in the range of -7 C to 70 C. Flashing rate and color of lighting is to be provided as per requirement. There should be minimum current losses of less than 20 micro-amperes in sleep-charging mode to enhance product life and single charge should provide for a minimum autonomy of 50 hours. The height, width and length shall not be less than 10 mm x 100 mm x 100 mm. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive as per manufacturer's recommendation and complete as directed by the engineer. Warranty Certificate and test reports confirming to compressive strength as per MORTH circular shall be obtained from the manufacturer and submitted to the engineer in charge. Two Years Warranty Certificate for Solar RPM for the quantity installed and a certified copy of test reports from an independent test laboratory conforming to water ingress shall be obtained from the Manufacturer by the contractor and submitted to the engineer-in-charge.
60
3300
198000
Total Amount (Rs.)
-
-
990698
Description
-
-
-
Dismantling of Flexible Pavements (Dismantling of flexible pavements and disposal of dismantled materials up to a lead of 1000 metres, stacking serviceable and unserviceable materials separately) (Bituminous course)
2.25
708
1593
Dismantling of Flexible Pavements (Dismantling of flexible pavements and disposal of dismantled materials up to a lead of 1000 metres, stacking serviceable and unserviceable materials separately) (Granular courses)
2.5
108
272
Dismantling Kerb Stone channel (Dismantling kerb stone channel by manual means and disposal of dismantled material with all lifts and up to a lead of 1000 metre)
2
42
86
Construction of Median and Island with Soil Taken from Borrow Areas (Construction of median and Island above road level with approved material brought from borrow pits, spread, sloped and compacted as per clause 408)
4.12
767
3165
Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous/granular surface cleaned with mechanical broom. - Tack Coat on Granular surfaces treated with primer
51.8
14
732
Dense Graded Bituminous Macadam-II (Providing and laying dense graded bituminous macadam with higher capacity batch type HMP using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 505 complete in all respects.) (50-75 mm)
3.45
9688
33457
Construction of cement concrete kerb with top and bottom width 115 and 165 mm respectively, 250 mm high in M 20 grade PCC on M-10 grade foundation 150 mm thick, foundation having 50 mm projection beyond kerb stone, kerb stone laid with kerb laying machine, foundation concrete laid manually, all complete as per clause 408
20
501
10020
Painting Two Coats on New Concrete Surfaces (Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces)
7.3
128
934
Providing and laying of hot applied Thermoplastic compound 2.5mm thick including reflectorizing glass beads @ 250gms per sqm area, thickness of 2.5mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform and free from streaks and holes etc complete as per MoRT&H Specification No.803 (Road marking)
280.28
673
188628
Providing and erecting of Retro-Reflectorized Cautionary, Mandatory and Informatory signs (with definition board) made out of High Intensity Prismatic Grade Sheeting confirming to Type-XI standards of IRC-67:2012 and ASTM D 4956-09, specification and fixed over 2mm thick Aluminium sheet fixed over a back supporting frame of 25mm x 25mm x 3mm Mild Steel angle and supported on a mild steel angle post 75x75x6mm with a clear height of not less than 2.10m from the ground level to the bottom of the sign board and 0.60m below ground level The sign post should be painted as per IRC-67:2012 and firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45cm x 45cm x 60cm size including cost and conveyance of all materials, equipment, Machinery and labour with all leads and lifts, loading charges necessary for satisfactory completion of the work as directed by the engineer in charge. High intensity Retro-Reflectro sheet shall consist of minimum coefficient of Retro-Reflection as per Table 6.6 of IRC-67:2012. The retro-reflective sheeting shall be covered under 7 year warranty issued for field performance and a certified copy of three years outdoor exposure report shall be obtained as per IRC-67:2012 (as per MoRT&H Specification No.801)
-
-
-
(i) 900mm Equilateral triangular - Road Hump Ahead
2
5126
10252
Providing and fixing reflective road studs of 'Category A' Raised pavement markers made out of poly carbonate / methyl methacrylate / ABS moulded body confirming to ASTM D 788 and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face with retro reflectance and chromaticity values confirming to ASTM D4280. The reflective raised pavement markers shall also confirm to the MoRTH circular No RW/NH.33023/10/97-DO.III dt. 11.06.97. The height, width and length shall not be less than 15mm, 90mm and 100mm and with minimum reflective area of 13 Sq.cm on each side and the slope to the base shall be 35 + / - 5 degree. Each reflector shall have a CIL not less than values specified in Table 2 of said MoRTH circular. The strength of detachment of the integrated cylindrical shanks, (of diameter not less than 19 + / - 2mm and height not less than 30 + / - 2mm) from the body is to be a minimum value of 500 Kgf. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive as per manufacturer's recommendation and complete as directed by the engineer. The marker shall support a load of 13635 Kg tested in accordance with ASTM D4280 and confirming to IRC:35-2015 guidelines and MoRT&H specification 804 etc., CompleteRoad (studs)
66
480
31680
Supply and Installation of Single arm Solar street lights - Supply of 1x 80w (+/-5w) Stand alone Solar Streetlight System having 2 days backup and Suitable for dimming a) Streetlight Luminaire shall have minimum 12,500 Lumens System output, greater than 160 Lumens Per watt system efficiency, IP66 & IK10 Protection, luminaire made Corrosion proof coated Pressure Diecast aluminum Housing and individual lens for each LED embedded on PC cover. 70,000 burning hours life - 1no b) Solar Panel of 300 - 340Wp Mono- Crystalline 36V with excellent aging resistance and UV endurance to withstand harsh environment environmentally sealed to IP67- 1no c) The Batteries using in the system shall be of 25.6V 60Ah, 1536Whr Maintenance free Lithium Pherro Phospate battery having minimum 2000 cycles life - 1no d) The Charge controller using in the system shall be 400Wp MPPT type Programmable and dimmable via blue tooth app at site, 93% efficiency, built in protection of Battery Reverse Polarity, Panel Reverse Polarity, Panel Reverse Current, Surge Protection at PV input, Battery Over Voltage, Load short circuit and fuse protection. The Charge Controller shall be kept inside the Pole Junction box e) Supply installation testing and commissioning of above mentioned Solar system on 9 metres height hot dip galvanized Octagonal Pole made of BSEN10025 GI with min top 90mm and bottom 190mm dia made of min 3mm sheet thickness, Base Plate 350x350x20mm, Mounting Brackets for holding Solar panels at the top, Galvanized Battery mounting box and single arm bracket with all accessories for fixing luminaires as per structural stability design f) Foundation 500mm x 500mm x 800mm below soil level and 300mm above ground level of M25 Grade for Single arm bracket and as per instructions by NHAI
4
90140
360560
Providing fixing of Median marker double sided made of polycarbonate for impact resistance and good weather ability. Polycarbonate used for molding the median marker shall have a minimum Izod impact strength value of 600 J/m at room temperature. The impact strength of the poly carbonate should not decrease to less than 70% of its initial value on being subjected to UV weathering as per ASTM G 155 for 1000 hours or exposure to 2 years of natural weathering. The body of the median marker shall be in the form of an isosceles trapezoidal structure of length 15 cm height and width of 10 x 10 cm. The median marker shall have fluorescent yellow retro reflective sheeting confirming to Tpe XI specifications as per ASTM D 4956.Area of reflective sheeting should not be less than 70 cm2 Edge of retro reflective shall be concealed using a grill/mesh/similar mechanism to prevent vandalism and sheeting pilferage. The logo of the manufacturer shall be embossed and painted in contrasting colour on both side of median marker for distinct identification.
20
470
9400
pedestrian guard rail
20
4851
97020
Supplying of Solar Raised Pavement Markers made of polycarbonate molded body, solar powered, LED self- illumination in active mode, 360 degree illumination and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face in passive mode. The product shall support a load of 13635 kg tested in accordance to MORTH and ASTM D 4280 Type H. The product should be resistant water ingress according to IP 65 standards with IS 12063:1987 Category 2 and should withstand temperatures to in the range of -7 C to 70 C. Flashing rate and color of lighting is to be provided as per requirement. There should be minimum current losses of less than 20 micro-amperes in sleep-charging mode to enhance product life and single charge should provide for a minimum autonomy of 50 hours. The height, width and length shall not be less than 10 mm x 100 mm x 100 mm. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive as per manufacturer's recommendation and complete as directed by the engineer. Warranty Certificate and test reports confirming to compressive strength as per MORTH circular shall be obtained from the manufacturer and submitted to the engineer in charge. Two Years Warranty Certificate for Solar RPM for the quantity installed and a certified copy of test reports from an independent test laboratory conforming to water ingress shall be obtained from the Manufacturer by the contractor and submitted to the engineer-in-charge.
50
3300
165000
Supply and installation of Solar LED Blinking Variable Signal light of 300mm dia Polycarbonate housing with IP65 Protection. X Model Light of Red or Amber Bib, (Blue, White & Red), 3 Blinkers on top and 1 on Vertical Pipe. The Pole shall be L Type Cantilever design bade of 5’’ Gi Pipe with Yellow Coating, Height 25 Feet, L Model Top 9 Feet length. The power Shall be generated using 150-165Wp Solar Panel and stored in Maintenance free Battery 12V 60Ah Lithium attery. The cost shall include Solar Charge Controller, Battery Box and the solar panel shall be mounted separately on crash barrier with proper framing as required.
2
39500
79000
Total Amount (Rs.)
-
-
991799
Description
-
-
-
Providing and erecting of Retro-Reflectorized Cautionary, Mandatory and Informatory signs (with definition board) made out of High Intensity Prismatic Grade Sheeting confirming to Type-XI standards of IRC-67:2012 and ASTM D 4956-09, specification and fixed over 2mm thick Aluminium sheet fixed over a back supporting frame of 25mm x 25mm x 3mm Mild Steel angle and supported on a mild steel angle post 75x75x6mm with a clear height of not less than 2.10m from the ground level to the bottom of the sign board and 0.60m below ground level The sign post should be painted as per IRC-67:2012 and firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45cm x 45cm x 60cm size including cost and conveyance of all materials, equipment, Machinery and labour with all leads and lifts, loading charges necessary for satisfactory completion of the work as directed by the engineer in charge. High intensity Retro-Reflectro sheet shall consist of minimum coefficient of Retro-Reflection as per Table 6.6 of IRC-67:2012. The retro-reflective sheeting shall be covered under 7 year warranty issued for field performance and a certified copy of three years outdoor exposure report shall be obtained as per IRC-67:2012 (as per MoRT&H Specification No.801)
-
-
-
(i) 80cm x 60cm Rectangular - Bus stop Sign Board
2
6349
12698
Supply & Installation of Stainless Steel Bus shelter size of 6Mtr X 2.5Mtr SS304 Grade (As per attached Drawing) including Civil works
2
390000
780000
Supplying of Solar Raised Pavement Markers made of polycarbonate molded body, solar powered, LED self- illumination in active mode, 360 degree illumination and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face in passive mode. The product shall support a load of 13635 kg tested in accordance to MORTH and ASTM D 4280 Type H. The product should be resistant water ingress according to IP 65 standards with IS 12063:1987 Category 2 and should withstand temperatures to in the range of -7 C to 70 C. Flashing rate and color of lighting is to be provided as per requirement. There should be minimum current losses of less than 20 micro-amperes in sleep-charging mode to enhance product life and single charge should provide for a minimum autonomy of 50 hours. The height, width and length shall not be less than 10 mm x 100 mm x 100 mm. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive as per manufacturer's recommendation and complete as directed by the engineer. Warranty Certificate and test reports confirming to compressive strength as per MORTH circular shall be obtained from the manufacturer and submitted to the engineer in charge. Two Years Warranty Certificate for Solar RPM for the quantity installed and a certified copy of test reports from an independent test laboratory conforming to water ingress shall be obtained from the Manufacturer by the contractor and submitted to the engineer-in-charge.
60
3300
198000
Total Amount (Rs.)
-
-
990698
Description
-
-
-
Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous/granular surface cleaned with mechanical broom. - Tack Coat on Granular surfaces treated with primer
62.9
14
889
Dense Graded Bituminous Macadam-II (Providing and laying dense graded bituminous macadam with higher capacity batch type HMP using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 505 complete in all respects.) (50-75 mm)
4.2
9688
40627
Providing and laying of hot applied Thermoplastic compound 2.5mm thick including reflectorizing glass beads @ 250gms per sqm area, thickness of 2.5mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform and free from streaks and holes etc complete as per MoRT&H Specification No.803 (Road marking)
282.1
673
189867
Providing and erecting of Retro-Reflectorized Cautionary, Mandatory and Informatory signs (with definition board) made out of High Intensity Prismatic Grade Sheeting confirming to Type-XI standards of IRC-67:2012 and ASTM D 4956-09, specification and fixed over 2mm thick Aluminium sheet fixed over a back supporting frame of 25mm x 25mm x 3mm Mild Steel angle and supported on a mild steel angle post 75x75x6mm with a clear height of not less than 2.10m from the ground level to the bottom of the sign board and 0.60m below ground level The sign post should be painted as per IRC-67:2012 and firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45cm x 45cm x 60cm size including cost and conveyance of all materials, equipment, Machinery and labour with all leads and lifts, loading charges necessary for satisfactory completion of the work as directed by the engineer in charge. High intensity Retro-Reflectro sheet shall consist of minimum coefficient of Retro-Reflection as per Table 6.6 of IRC-67:2012. The retro-reflective sheeting shall be covered under 7 year warranty issued for field performance and a certified copy of three years outdoor exposure report shall be obtained as per IRC-67:2012 (as per MoRT&H Specification No.801)
-
-
-
(i) 900mm Equilateral triangular - Road Hump Ahead
3
5126
15378
Providing and fixing reflective road studs of 'Category A' Raised pavement markers made out of poly carbonate / methyl methacrylate / ABS moulded body confirming to ASTM D 788 and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face with retro reflectance and chromaticity values confirming to ASTM D4280. The reflective raised pavement markers shall also confirm to the MoRTH circular No RW/NH.33023/10/97-DO.III dt. 11.06.97. The height, width and length shall not be less than 15mm, 90mm and 100mm and with minimum reflective area of 13 Sq.cm on each side and the slope to the base shall be 35 + / - 5 degree. Each reflector shall have a CIL not less than values specified in Table 2 of said MoRTH circular. The strength of detachment of the integrated cylindrical shanks, (of diameter not less than 19 + / - 2mm and height not less than 30 + / - 2mm) from the body is to be a minimum value of 500 Kgf. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive as per manufacturer's recommendation and complete as directed by the engineer. The marker shall support a load of 13635 Kg tested in accordance with ASTM D4280 and confirming to IRC:35-2015 guidelines and MoRT&H specification 804 etc., CompleteRoad (studs)
68
480
32640
Supply and Installation of Single arm Solar street lights - Supply of 1x 80w (+/-5w) Stand alone Solar Streetlight System having 2 days backup and Suitable for dimming a) Streetlight Luminaire shall have minimum 12,500 Lumens System output, greater than 160 Lumens Per watt system efficiency, IP66 & IK10 Protection, luminaire made Corrosion proof coated Pressure Diecast aluminum Housing and individual lens for each LED embedded on PC cover. 70,000 burning hours life - 1no b) Solar Panel of 300 - 340Wp Mono- Crystalline 36V with excellent aging resistance and UV endurance to withstand harsh environment environmentally sealed to IP67- 1no c) The Batteries using in the system shall be of 25.6V 60Ah, 1536Whr Maintenance free Lithium Pherro Phospate battery having minimum 2000 cycles life - 1no d) The Charge controller using in the system shall be 400Wp MPPT type Programmable and dimmable via blue tooth app at site, 93% efficiency, built in protection of Battery Reverse Polarity, Panel Reverse Polarity, Panel Reverse Current, Surge Protection at PV input, Battery Over Voltage, Load short circuit and fuse protection. The Charge Controller shall be kept inside the Pole Junction box e) Supply installation testing and commissioning of above mentioned Solar system on 9 metres height hot dip galvanized Octagonal Pole made of BSEN10025 GI with min top 90mm and bottom 190mm dia made of min 3mm sheet thickness, Base Plate 350x350x20mm, Mounting Brackets for holding Solar panels at the top, Galvanized Battery mounting box and single arm bracket with all accessories for fixing luminaires as per structural stability design f) Foundation 500mm x 500mm x 800mm below soil level and 300mm above ground level of M25 Grade for Single arm bracket and as per instructions by NHAI
4
90140
360560
Supplying of Solar Raised Pavement Markers made of polycarbonate molded body, solar powered, LED self- illumination in active mode, 360 degree illumination and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face in passive mode. The product shall support a load of 13635 kg tested in accordance to MORTH and ASTM D 4280 Type H. The product should be resistant water ingress according to IP 65 standards with IS 12063:1987 Category 2 and should withstand temperatures to in the range of -7 C to 70 C. Flashing rate and color of lighting is to be provided as per requirement. There should be minimum current losses of less than 20 micro-amperes in sleep-charging mode to enhance product life and single charge should provide for a minimum autonomy of 50 hours. The height, width and length shall not be less than 10 mm x 100 mm x 100 mm. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive as per manufacturer's recommendation and complete as directed by the engineer. Warranty Certificate and test reports confirming to compressive strength as per MORTH circular shall be obtained from the manufacturer and submitted to the engineer in charge. Two Years Warranty Certificate for Solar RPM for the quantity installed and a certified copy of test reports from an independent test laboratory conforming to water ingress shall be obtained from the Manufacturer by the contractor and submitted to the engineer-in-charge.
80
3300
264000
Supply and installation of Solar LED Blinking Variable Signal light of 300mm dia Polycarbonate housing with IP65 Protection. X Model Light of Red or Amber Bib, (Blue, White & Red), 3 Blinkers on top and 1 on Vertical Pipe. The Pole shall be L Type Cantilever design bade of 5’’ Gi Pipe with Yellow Coating, Height 25 Feet, L Model Top 9 Feet length. The power Shall be generated using 150-165Wp Solar Panel and stored in Maintenance free Battery 12V 60Ah Lithium attery. The cost shall include Solar Charge Controller, Battery Box and the solar panel shall be mounted separately on crash barrier with proper framing as required.
2
39500
79000
Total Amount (Rs.)
-
-
982961
Description
-
-
-
Providing and laying of hot applied Thermoplastic compound 2.5mm thick including reflectorizing glass beads @ 250gms per sqm area, thickness of 2.5mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform and free from streaks and holes etc complete as per MoRT&H Specification No.803 (Road marking)
51
673
34323
Providing and erecting of Retro-Reflectorized Cautionary, Mandatory and Informatory signs (with definition board) made out of High Intensity Prismatic Grade Sheeting confirming to Type-XI standards of IRC-67:2012 and ASTM D 4956-09, specification and fixed over 2mm thick Aluminium sheet fixed over a back supporting frame of 25mm x 25mm x 3mm Mild Steel angle and supported on a mild steel angle post 75x75x6mm with a clear height of not less than 2.10m from the ground level to the bottom of the sign board and 0.60m below ground level The sign post should be painted as per IRC-67:2012 and firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45cm x 45cm x 60cm size including cost and conveyance of all materials, equipment, Machinery and labour with all leads and lifts, loading charges necessary for satisfactory completion of the work as directed by the engineer in charge. High intensity Retro-Reflectro sheet shall consist of minimum coefficient of Retro-Reflection as per Table 6.6 of IRC-67:2012. The retro-reflective sheeting shall be covered under 7 year warranty issued for field performance and a certified copy of three years outdoor exposure report shall be obtained as per IRC-67:2012 (as per MoRT&H Specification No.801)
-
-
-
(i) 80cm x 60cm Rectangular - Bus stop Sign Board
2
6349
12698
Providing and fixing reflective road studs of 'Category A' Raised pavement markers made out of poly carbonate / methyl methacrylate / ABS moulded body confirming to ASTM D 788 and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face with retro reflectance and chromaticity values confirming to ASTM D4280. The reflective raised pavement markers shall also confirm to the MoRTH circular No RW/NH.33023/10/97-DO.III dt. 11.06.97. The height, width and length shall not be less than 15mm, 90mm and 100mm and with minimum reflective area of 13 Sq.cm on each side and the slope to the base shall be 35 + / - 5 degree. Each reflector shall have a CIL not less than values specified in Table 2 of said MoRTH circular. The strength of detachment of the integrated cylindrical shanks, (of diameter not less than 19 + / - 2mm and height not less than 30 + / - 2mm) from the body is to be a minimum value of 500 Kgf. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive as per manufacturer's recommendation and complete as directed by the engineer. The marker shall support a load of 13635 Kg tested in accordance with ASTM D4280 and confirming to IRC:35-2015 guidelines and MoRT&H specification 804 etc., CompleteRoad (studs)
136
480
65280
Supply & Installation of Stainless Steel Bus shelter size of 6Mtr X 2.5Mtr SS304 Grade (As per attached Drawing) including Civil works
2
390000
780000
Supplying of Solar Raised Pavement Markers made of polycarbonate molded body, solar powered, LED self- illumination in active mode, 360 degree illumination and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face in passive mode. The product shall support a load of 13635 kg tested in accordance to MORTH and ASTM D 4280 Type H. The product should be resistant water ingress according to IP 65 standards with IS 12063:1987 Category 2 and should withstand temperatures to in the range of -7 C to 70 C. Flashing rate and color of lighting is to be provided as per requirement. There should be minimum current losses of less than 20 micro-amperes in sleep-charging mode to enhance product life and single charge should provide for a minimum autonomy of 50 hours. The height, width and length shall not be less than 10 mm x 100 mm x 100 mm. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive as per manufacturer's recommendation and complete as directed by the engineer. Warranty Certificate and test reports confirming to compressive strength as per MORTH circular shall be obtained from the manufacturer and submitted to the engineer in charge. Two Years Warranty Certificate for Solar RPM for the quantity installed and a certified copy of test reports from an independent test laboratory conforming to water ingress shall be obtained from the Manufacturer by the contractor and submitted to the engineer-in-charge.
8
3300
26400
Supply and installation of Solar LED Blinking Variable Signal light of 300mm dia Polycarbonate housing with IP65 Protection. X Model Light of Red or Amber Bib, (Blue, White & Red), 3 Blinkers on top and 1 on Vertical Pipe. The Pole shall be L Type Cantilever design bade of 5’’ Gi Pipe with Yellow Coating, Height 25 Feet, L Model Top 9 Feet length. The power Shall be generated using 150-165Wp Solar Panel and stored in Maintenance free Battery 12V 60Ah Lithium attery. The cost shall include Solar Charge Controller, Battery Box and the solar panel shall be mounted separately on crash barrier with proper framing as required.
2
39500
79000
Total Amount (Rs.)
-
-
997701
Description
-
-
-
Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous/granular surface cleaned with mechanical broom. - Tack Coat on Granular surfaces treated with primer
116.55
14
1647
Dense Graded Bituminous Macadam-II (Providing and laying dense graded bituminous macadam with higher capacity batch type HMP using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 505 complete in all respects.) (50-75 mm)
7.99
9688
77370
Providing and laying of hot applied Thermoplastic compound 2.5mm thick including reflectorizing glass beads @ 250gms per sqm area, thickness of 2.5mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform and free from streaks and holes etc complete as per MoRT&H Specification No.803 (Road marking)
292.86
673
197095
Providing and erecting of Retro-Reflectorized Cautionary, Mandatory and Informatory signs (with definition board) made out of High Intensity Prismatic Grade Sheeting confirming to Type-XI standards of IRC-67:2012 and ASTM D 4956-09, specification and fixed over 2mm thick Aluminium sheet fixed over a back supporting frame of 25mm x 25mm x 3mm Mild Steel angle and supported on a mild steel angle post 75x75x6mm with a clear height of not less than 2.10m from the ground level to the bottom of the sign board and 0.60m below ground level The sign post should be painted as per IRC-67:2012 and firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45cm x 45cm x 60cm size including cost and conveyance of all materials, equipment, Machinery and labour with all leads and lifts, loading charges necessary for satisfactory completion of the work as directed by the engineer in charge. High intensity Retro-Reflectro sheet shall consist of minimum coefficient of Retro-Reflection as per Table 6.6 of IRC-67:2012. The retro-reflective sheeting shall be covered under 7 year warranty issued for field performance and a certified copy of three years outdoor exposure report shall be obtained as per IRC-67:2012 (as per MoRT&H Specification No.801)
-
-
-
(i) 900mm Equilateral triangular - Road Hump Ahead
4
5126
20504
Providing and fixing reflective road studs of 'Category A' Raised pavement markers made out of poly carbonate / methyl methacrylate / ABS moulded body confirming to ASTM D 788 and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face with retro reflectance and chromaticity values confirming to ASTM D4280. The reflective raised pavement markers shall also confirm to the MoRTH circular No RW/NH.33023/10/97-DO.III dt. 11.06.97. The height, width and length shall not be less than 15mm, 90mm and 100mm and with minimum reflective area of 13 Sq.cm on each side and the slope to the base shall be 35 + / - 5 degree. Each reflector shall have a CIL not less than values specified in Table 2 of said MoRTH circular. The strength of detachment of the integrated cylindrical shanks, (of diameter not less than 19 + / - 2mm and height not less than 30 + / - 2mm) from the body is to be a minimum value of 500 Kgf. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive as per manufacturer's recommendation and complete as directed by the engineer. The marker shall support a load of 13635 Kg tested in accordance with ASTM D4280 and confirming to IRC:35-2015 guidelines and MoRT&H specification 804 etc., CompleteRoad (studs)
264
480
126720
Supply and Installation of Single arm Solar street lights - Supply of 1x 80w (+/-5w) Stand alone Solar Streetlight System having 2 days backup and Suitable for dimming a) Streetlight Luminaire shall have minimum 12,500 Lumens System output, greater than 160 Lumens Per watt system efficiency, IP66 & IK10 Protection, luminaire made Corrosion proof coated Pressure Diecast aluminum Housing and individual lens for each LED embedded on PC cover. 70,000 burning hours life - 1no b) Solar Panel of 300 - 340Wp Mono- Crystalline 36V with excellent aging resistance and UV endurance to withstand harsh environment environmentally sealed to IP67- 1no c) The Batteries using in the system shall be of 25.6V 60Ah, 1536Whr Maintenance free Lithium Pherro Phospate battery having minimum 2000 cycles life - 1no d) The Charge controller using in the system shall be 400Wp MPPT type Programmable and dimmable via blue tooth app at site, 93% efficiency, built in protection of Battery Reverse Polarity, Panel Reverse Polarity, Panel Reverse Current, Surge Protection at PV input, Battery Over Voltage, Load short circuit and fuse protection. The Charge Controller shall be kept inside the Pole Junction box e) Supply installation testing and commissioning of above mentioned Solar system on 9 metres height hot dip galvanized Octagonal Pole made of BSEN10025 GI with min top 90mm and bottom 190mm dia made of min 3mm sheet thickness, Base Plate 350x350x20mm, Mounting Brackets for holding Solar panels at the top, Galvanized Battery mounting box and single arm bracket with all accessories for fixing luminaires as per structural stability design f) Foundation 500mm x 500mm x 800mm below soil level and 300mm above ground level of M25 Grade for Single arm bracket and as per instructions by NHAI
4
90140
360560
Supplying of Solar Raised Pavement Markers made of polycarbonate molded body, solar powered, LED self- illumination in active mode, 360 degree illumination and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face in passive mode. The product shall support a load of 13635 kg tested in accordance to MORTH and ASTM D 4280 Type H. The product should be resistant water ingress according to IP 65 standards with IS 12063:1987 Category 2 and should withstand temperatures to in the range of -7 C to 70 C. Flashing rate and color of lighting is to be provided as per requirement. There should be minimum current losses of less than 20 micro-amperes in sleep-charging mode to enhance product life and single charge should provide for a minimum autonomy of 50 hours. The height, width and length shall not be less than 10 mm x 100 mm x 100 mm. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive as per manufacturer's recommendation and complete as directed by the engineer. Warranty Certificate and test reports confirming to compressive strength as per MORTH circular shall be obtained from the manufacturer and submitted to the engineer in charge. Two Years Warranty Certificate for Solar RPM for the quantity installed and a certified copy of test reports from an independent test laboratory conforming to water ingress shall be obtained from the Manufacturer by the contractor and submitted to the engineer-in-charge.
40
3300
132000
Supply and installation of Solar LED Blinking Variable Signal light of 300mm dia Polycarbonate housing with IP65 Protection. X Model Light of Red or Amber Bib, (Blue, White & Red), 3 Blinkers on top and 1 on Vertical Pipe. The Pole shall be L Type Cantilever design bade of 5’’ Gi Pipe with Yellow Coating, Height 25 Feet, L Model Top 9 Feet length. The power Shall be generated using 150-165Wp Solar Panel and stored in Maintenance free Battery 12V 60Ah Lithium attery. The cost shall include Solar Charge Controller, Battery Box and the solar panel shall be mounted separately on crash barrier with proper framing as required.
2
39500
79000
Total Amount (Rs.)
-
-
994896
Description
-
-
-
Providing and laying of hot applied Thermoplastic compound 2.5mm thick including reflectorizing glass beads @ 250gms per sqm area, thickness of 2.5mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform and free from streaks and holes etc complete as per MoRT&H Specification No.803 (Road marking)
162
673
109026
Supply and Installation of Single arm Solar street lights - Supply of 1x 80w (+/-5w) Stand alone Solar Streetlight System having 2 days backup and Suitable for dimming a) Streetlight Luminaire shall have minimum 12,500 Lumens System output, greater than 160 Lumens Per watt system efficiency, IP66 & IK10 Protection, luminaire made Corrosion proof coated Pressure Diecast aluminum Housing and individual lens for each LED embedded on PC cover. 70,000 burning hours life - 1no b) Solar Panel of 300 - 340Wp Mono- Crystalline 36V with excellent aging resistance and UV endurance to withstand harsh environment environmentally sealed to IP67- 1no c) The Batteries using in the system shall be of 25.6V 60Ah, 1536Whr Maintenance free Lithium Pherro Phospate battery having minimum 2000 cycles life - 1no d) The Charge controller using in the system shall be 400Wp MPPT type Programmable and dimmable via blue tooth app at site, 93% efficiency, built in protection of Battery Reverse Polarity, Panel Reverse Polarity, Panel Reverse Current, Surge Protection at PV input, Battery Over Voltage, Load short circuit and fuse protection. The Charge Controller shall be kept inside the Pole Junction box e) Supply installation testing and commissioning of above mentioned Solar system on 9 metres height hot dip galvanized Octagonal Pole made of BSEN10025 GI with min top 90mm and bottom 190mm dia made of min 3mm sheet thickness, Base Plate 350x350x20mm, Mounting Brackets for holding Solar panels at the top, Galvanized Battery mounting box and single arm bracket with all accessories for fixing luminaires as per structural stability design f) Foundation 500mm x 500mm x 800mm below soil level and 300mm above ground level of M25 Grade for Single arm bracket and as per instructions by NHAI
6
90140
540840
Supplying of Solar Raised Pavement Markers made of polycarbonate molded body, solar powered, LED self- illumination in active mode, 360 degree illumination and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face in passive mode. The product shall support a load of 13635 kg tested in accordance to MORTH and ASTM D 4280 Type H. The product should be resistant water ingress according to IP 65 standards with IS 12063:1987 Category 2 and should withstand temperatures to in the range of -7 C to 70 C. Flashing rate and color of lighting is to be provided as per requirement. There should be minimum current losses of less than 20 micro-amperes in sleep-charging mode to enhance product life and single charge should provide for a minimum autonomy of 50 hours. The height, width and length shall not be less than 10 mm x 100 mm x 100 mm. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive as per manufacturer's recommendation and complete as directed by the engineer. Warranty Certificate and test reports confirming to compressive strength as per MORTH circular shall be obtained from the manufacturer and submitted to the engineer in charge. Two Years Warranty Certificate for Solar RPM for the quantity installed and a certified copy of test reports from an independent test laboratory conforming to water ingress shall be obtained from the Manufacturer by the contractor and submitted to the engineer-in-charge.
80
3300
264000
Solar Blinkers - Blinking Variable Signal 300mm light Red or Amber Bib X Model Light (Blue, White & Red)L Pole Bi 5'', Height 25 Feet, L Model Top 9 Feet Yellow Coating Solar Panel, 150W Solar Charge Controller/ Battery Box / Maintenance free Battery 12V 60-100Ah Lithium Battery and as per instructions by NHAI
1
30000
30000
Total Amount (Rs.)
-
-
943866
Grand total (Rs)
-
-
14029844
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements