Municipal Administration And Water Supply Department Tender

Supply and delivery of the following materials including cost and conveyance of all materials and all labour charges etc., complete as per standard specification 50mm dia ss shaft - 1.20m length

65mm dia - 6" Length ss bush

68mm dia - 6" Length ss bush

80mm X 68mm X 125mm taplon bush

100mm X 20mm Bolt

75mm X 16mm bolt

50mm Shaft Bend Extension

Bearing Lubrication Oil (20-40)

Rubber Sheet

Repairs and maintenance of Gun metal impeller fan including cost and conveyance of all materilas and all labour charges etc., complete as per std.specification vetical turbine motor 120HP

Transportation charges towards Conveyance of power pumpset (centrifugal, jet and submersible) and its accessories from divisional stores to site of works.thiruvannamalai to ulagalapadi head works - 24km.

150 HP vetical turbine motor clear water well Removal of centrifugal pumpset/ jet pumps/ submersible pumpsets and its accessories from borewell/ open well for attending repairs 50% of the rates mentioned under item 17 (a), (b) and (c) may be allowed for the respective Horse power. Labour Charges for erection of Horizontal shaft, centrifugal pumpset (Coupled/Monoblock) in bore well/Open well including fixing of suction pipe and foot valve upto a maximum depth of 7 metres and delivery pipes to the required length with valves, pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPIC switches starter, Voltmeter, Ammeter, Capacitor single phasing preventor and laying and jointing the cables and twin earthing as per IE rules including providing bed blocks etc., complete and operating the pumps and trial run for 10 days including signing of completion of reports as required by EB authorities. 150 HP motor

Rewinding the motor coil including cost and conveyance of all materials etc., complete as per standard specification. The contractor taken over the old materials and deduction of burnt coil. 150 HP motor

Re-erection of centrifugal pumpsets, jet pumpsets and its accessories into the borewell/ openwell after attending the repairs 50% of the rate mentioned under item 17 (a), (b) and (c) may be allowed for respective Horse power. Labour Charges for erection of Horizontal shaft, centrifugal pumpset (Coupled/Monoblock) in bore well/Open well including fixing of suction pipe and foot valve upto a maximum depth of 7 metres and delivery pipes to the required length with valves, pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPIC switches starter, Voltmeter, Ammeter, Capacitor single phasing preventor and laying and jointing the cables and twin earthing as per IE rules including providing bed blocks etc., complete and operating the pumps and trial run for 10 days including signing of completion of reports as required by EB authorities.150 HP motor

Supply, delivery and fixing of terminal plate including cost and conveyance of all materials and all labour charges etc., complete

Transportation charges towards Conveyance of power pumpset (centrifugal, jet and submersible) and its accessories from divisional stores to site of works. in thiruvannamalai to ulagalapadi head works - 24km.

60 HP centrifugal motor Removal of centrifugal pumpset/ jet pumps/ submersible pumpsets and its accessories from borewell/ open well for attending repairs 50% of the rates mentioned under item 17 (a), (b) and (c) may be allowed for the respective Horse power. Labour Charges for erection of Horizontal shaft, centrifugal pumpset (Coupled/Monoblock) in bore well/Open well including fixing of suction pipe and foot valve upto a maximum depth of 7 metres and delivery pipes to the required length with valves, pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPIC switches starter, Voltmeter, Ammeter, Capacitor single phasing preventor and laying and jointing the cables and twin earthing as per IE rules including providing bed blocks etc., complete and operating the pumps and trial run for 10 days including signing of completion of reports as required by EB authorities. 60 HP motor

Rewinding the motor coil including cost and conveyance of all materials etc., complete as per standard specification. The contractor taken over the old materials and deduction of burnt coil. 60 HP motor

Re-erection of centrifugal pumpsets, jet pumpsets and its accessories into the borewell/ openwell after attending the repairs 50% of the rate mentioned under item 17 (a), (b) and (c) may be allowed for respective Horse power. Labour Charges for erection of Horizontal shaft, centrifugal pumpset (Coupled/Monoblock) in bore well/Open well including fixing of suction pipe and foot valve upto a maximum depth of 7 metres and delivery pipes to the required length with valves, pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPIC switches starter, Voltmeter, Ammeter, Capacitor single phasing preventor and laying and jointing the cables and twin earthing as per IE rules including providing bed blocks etc., complete and operating the pumps and trial run for 10 days including signing of completion of reports as required by EB authorities. 60 HP motor

Supply, delivery and fixing of motor terminal plate including cost and conveyance of all materials and all labour charges etc., complete

Supply, delivery and fixing of 75 HP centrifugal motor spare parts including cost and conveyance of all materials and all labour charges etc., complete as per standard specification Front bearing

Back bearing

Armature shaft recondtion

Starter copper cable - 1.5m length

300 mm valve rod including cost and conveyance of all materials and all labour charges etc., complete

Supply, delivery and fixing of stater terminal plate including cost and conveyance of all materials and all labour charges etc., complete

Supply, delivery and fixing of packing rope, alloyed sheet and greeze including cost and conveyance of all materials and all labour charges etc., complete as per standard specification

Transportation charges towards Conveyance of power pumpset (centrifugal, jet and submersible) and its accessories from divisional stores to site of works. in thiruvannamalai to ulagalapadi head works - 24km.

ADD GST 18%