Municipal Administration And Water Supply Department Tender

Centering for soffits of RCC slabs of plane surface like lintels, beams ,etc.,including strutting 3m high using mild steel sheets of size 90cm X 60cm X and B.G 10 stiffened with M.S angles of size 25mm X 25mm X 3mm laid over silver Oak (C.W) joists of size 10cm X 6.5cm (spaced at about 90cm c/c )and supported dy casurina props of 10cm to 13cm dia (spaced of 75cm C/C) complying with standard specification and directed - 10 m 2 (P & D)Data 38

Reinforced Cement concrete 1:1.5 :3 (one cement, one and half M.sand & three course aggregate) using 20mm gauge hand broken/ and broken granite stone for all RCC items of works excluding centering shuttering and cost of reinforcement but including curing etc.,complete and also including fixing fan clamps and fixtures in rcc works wherever necessary as directed by departmental officer etc., complete.

Suppling and fabricating and placing in position MS (or) R.T.S. bar for reinforcement to all RCC works as per the design given including cost of steel and binding wire also in all floors.

Plastering with Cement Mortar 1:5 (One cement and Five sand), 12mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers.

Painting two coats for Exterior surface with approved Exterior Plastic Emulsion paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification.

Painting two coats with Ready Mixed Enamel Paint over the new iron works of approved quality and colour without priming coat including the cost all materials etc.,complete, in all floors.

Supply and delivery and fixing of 2000 Litre HDPE tank as per IS 12701 / 1996 including loading, unloading, transportation and labour charges for fixing of the GI pipes and specials for pipe connection works including cutting, threading and fixing charges etc., (Twad sor 2024-2025 pg.no: 87)

Removal of deep well hand pumps from borewell up to 40 m etc., complete complying with std specification (Twad sor 2024-2025 pg.no: 203)

Conveyance of Hand Pumps and its accessories from work site to Municipal store (Twad sor 2023-2024 pg.no: 318)n

Supply and delivery of clear water vertical wet type submersible pump conforming to IS 8034/2002 and as amended thereafter and BEE 3 Star Rated capable of discharging noted LPM against head of water column due to all causes. The pump shall be with stainless steel shaft and dynamically balanced bronze or Cast SS impeller, brass screws and CI FG 200 grade pump bowl/diffuser with ISI mark. The pump shall be directly coupled to a continuos rated two pole suitable wet type vertical squirrel cage induction motor suitable for operation in AC single phase 230 V+/- 10 %,50 HZ +/-5 %. 15 Lpm / 70 M. without panel board (Twad sor 2024-2025 pg.no: 101)

Supply and delivery of directon line starter confirming to IS 13947 and IEC60947-1suitable KW rating for operation in AC/ single Phase /50HZ (±5%) and 230V (±10% )including Ammeter, Voltmeter, Thermal Ove rload relay,16Amps 2pole Magnetic Contactor with under Voltage protection, Indication lamp,starting capacitor,running capacitor and On/Off Push button switches, 5way connector, wiring with 1sq.mm /1.5sq.mm copper PVC insulated cable,powder coated vermin proof box including the capacitor (the cost of capacitoris to be taken separately). (Twad sor 2024-2025 pg.no: 101)

Supplying and delivery of the following water supply materials with ISI specification

1) 32mm dia U PVC Pipe (Twad sor 2024-2025 pg.no: 07)

2) 25mm dia UPVC Pipe (PWD sor 2024-2025 pg.no: 157)

3) 20mm dia UPVC Pipe (PWD sor 2024-2025 pg.no: 157)

4) Nylon Rope (PWD sor 2024-2025 pg.no: 156)

Supply and delivery of 2.5 Sq.mm 3 core flat cable etc complete complying with std specification (Twad sor 2024-2025 pg.no: 124)

Supply and delivery of M.S. Kiosk of size 0.75m x 0.45m x 0.75m made up of MS angle of size 50mm x50mm x4mm alround covered with 16 gauge MS sheet and kiosk door made up of MS plates of size 25mm x 3mm including cutting, welding, grinding, locking arranges and labour charges etc., (Twad sor 2024-2025 pg.no: 91)

Labour charges for the erection of submersible pump set in bore well /open well including fixing and jointing submersible cable with proper clamps up to the starter to require depth and also fixing of riser pipes to the required depth valves erection clamps, pressure gauges up to the exterior wall of pump room and erection of panel board consisting of TPICN switches starter voltmeter, Ammeter, three pilot (indicating) lamps capacitor single phasing preventor, water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pump set and trail run for 10 days. (Twad sor 2024-2025 pg.no: 204)

Supply and fixing of TNEB meter board suitable fo 32A single phase service connection with 32A fuse unit (500V) 32A neutrallink and earth link (1"x1/8"copper flaton TW plank of size 375mmx300mmx19mm with supporting TW reepers of 1"thick an either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB metert of fuse unit (SD - 125 )

Supply and run of 2 of 4 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in 25mm dia GI pipe (Class 'B') suitably bent at both ends with necessary angle iron upright and end supports for mains (Sd-70)

Supply and run of 2 of 4 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V on 7 / 20 GI bearer wire for service connection mains Sd-65

Earthing as per PWD standard with an earth electrode of 2 metre Class 'B' GI pipe of dia not less than 32mm completewith necessary masonry work Sd-212

Supplying, laying and jointing G.I. Pipes of approved quality and best variety of "B" class pipe of the following dia including labour fixing G.I. Specials, (excluding charges for cutting and threading of pipes, cost of such specials) to wall with necessary teak wood plugs, clamps, screws, thread balls, shellac, etc., making holes on the walls (or) drilling holes in roof and making good the dismantled portions to original condition with necessray brick work / concrete and plastering wherever necessry with necessary scaffolding charges. The pipes are to be painted with the 2 coats of good variety and approved best quality of synthetic enamel paint over a priming coat of red oxide etc., complete in all floors complying with standard specification. G.I. pipes shall be got approved by the Executive Engineer before use on works. Above ground level. (25mm) (Twad sor 2024-2025 pg.no: 27)

Supplying and fixing in position the following GI Specials of heavy type and approved quality and good variety excluding fixing charges but including necessary cutting and threading of GI pipes, jointing the GI specials and painting with two coats with good variety and best quality synthetic enamel paint over a coat of red oxide primer and jointing the specials with pipe line using shellac etc., complete complying with standard specification. (The GI specials should be got approved by the Executive Engineer concerned before use on works.) (Twad sor 2024-2025 pg.no: 32)

GI tee 25mm

G.I. Coupling 25mm

GST 18%