Municipal Administration And Water Supply Department Tender

Plain Cement Concrete 1:2:4 (one cement, two sand and four hard broken stone jelly) using 20mm jelly for wearing coat including laying, compacting, finishing and curing, etc., complete as per standard specificatins and as directed by the departmental officers.

Centering for sides and soffits and RCC slabs and beams, lintels and other flat surfaces below 3M height including strutting and strutting arrangements as per standard specification and removing the same after the specified period and including cost and conveyance of all materials to site and all labour charges and all other incidental charges etc. complete as per standard specification.

Supplying and fabrication of steel for all RCC works including cost of steel, binding wire and labour charges and fabrication and placing in position etc., complete as per standard specification.

Providing and laying in position Standardised Concrete Mix M-20 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 325Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of sand, but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers - The Coarse and Fine aggregates to be used should comply with the requiremnents of IS staandards. (No separate payment will be made by the Department for the excess usage of materials)

Plastering with Cement Mortar 1:4 (One cement and Four sand), 20mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers.

Supplying and Laying Rubberised interlocking Paver Block M 40 grade Providing and Laying 83 mm tk high strength type conforming IS 15658-2007 of rubberized interlocking paver block in size of minimum compressive strength of 40 N mm2 in uniform shape of approved make to be laid in flurring bone pattern with quarry dust cushion below the uniform shape of approved non skitting surface in the top and the rate including levelling the base preparation of pavers as sub base, quarry dust cushion 150 mm tk laying out of pavement cut the pieces to fix the edge vibring the pavers,sweeping transporting loading unloading of paver block as per SS.

GST 12 %